Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Pond Turtle assemblyinstructions
PLEASE NOTE: Although your Pond Turtle Spinner is constructed with UV resistant SunTexTM fabric, it is recommended that you take it inside during storms and harsh weather to preserve its durability.
Step 1Slide the bottom of the Support Pole through the Velcro opening on the top of the Turtle’s body and out the opening on the bottom of the Turtle’s body. Fit the Horizontal struts inside the Turtle into the Fitting on the Support Pole. Close the Velcro opening. (diagram A)
Step 2Unfold the gore panels. Make sure that the lower edge binding tape is not twisted or bunched. Slide the Main Rotating Assembly through the center of the ring of gore panels with the support struts all facing up and curved in the same direction. (diagram B)
Step 3Insert the gore struts into the strut holes on the top disc of the Main Rotating Assembly. (diagram C)
Step 4Pound Ground Stake into ground and insert non-ferruled end of Support Pole into Ground Stake. (diagram D)
sku #’s 22382
C
A
D
GroundStake
strut holes
B Main Rotating Assembly
gore strutsgore panels
Support Pole
lower edgebinding tape
Support PoleHorizontal Struts