Upload
anonymous-hxq7pnoq
View
24
Download
2
Embed Size (px)
DESCRIPTION
brosure
Citation preview
MACHINES & SLIDESMACHINES & SLIDES222222
Techno Linear Motion Catalog 54
MA
CH
INE
S&
SLID
ES
2
Product Applications
Typical Production Applications For Techno Positioning Systems
Rotary Engraving
Techno Bridge Mount Slide,Standard-Duty Slide, Rotary Table 1and Multi-Axis Stepper Controllerused to engrave serial numbersinto cylindrical parts.
CNC Drilling and Tapping
Techno Standard-Duty Slide, Rotary Table 1and Multi-Axis Stepper Controller used to drilland tap set screw holes on plastic pulleys ina machine shop production application.
CNC Slitting Operation
Two Standard-Duty Slides andMulti-Axis Controller used toslit a pulley hub.
Product Finder Home Page
Techno Linear Motion Catalog 55
MA
CH
INE
S&
SLID
ES
2
Ink Jet Printing
Standard-Duty Slide and CenturionSingle-Axis Stepper Controller usedto print part numbers on the timing belts.
Typical Production Applications For Techno Positioning Systems
Product Applications
Circuit Board Inspection
Gantry III Table used for offlineinspection of circuit boards.Electronic Packaging Co.Dallas, TX(972) 484-7671
Belt Slicing
Standard-Duty Slide and CenturionSingle-Axis Stepper Controller usedto slice belts into stock widths.
Product Finder Home Page
Techno Linear Motion Catalog 56
MA
CH
INE
S&
SLID
ES
2
PAGEDESCRIPTIONPHOTOGRAPH
Machines & Slides Selection Guide
62
68
Gantry III, XY or XYZHeavy-duty system with heavy cast sides andmachined table surface. Ideal for inspection, fluiddispensing, drilling and test stands.Available with Z-axis strokes of 3", 6.8", 10.8", 18.7".
72
74
70
NOTE: If motor cables are not purchased with the above slides, mating connectors are required. (See page 166)
Standard-Duty Slide175 mm wide base for loads up to 250 lbs.Available in travel from 3" to 50".
Bridge Mounted SlideCan be configured as X, XY, XZ or XYZ with aselection of single-axis slides. Ideal for conveyorbelt and production line systems.
CPM Series MachinesCompact XYZ system. All electronics, motor driversand power supply are contained in the machine.Controller is a 3-axis micro stepper. Cover has built-in safety interlock.
59
Turnkey Production CentersComplete mechanical and control packages forlarge automation applications. Tables up to 5' x 10'travel.
DaVinci XYZ SystemsCompact XYZ system. All electronics, motor driversand power supply are contained within the castaluminum side legs. Available in 8" x 10" x 5",or 10" x 12" x 3.5" travel.
66
WizardCompact cantilever xy or xyz system includingelectronics. Two sizes, 200 mm x 200 mm and 400 x400 mm. 4th axis (rotary) available. Speeds up to 800mm per second. Optional teaching pendant eliminatesneed for PC.
Product Finder Home Page
Techno Linear Motion Catalog 57
MA
CH
INE
S&
SLID
ES
2
PAGEDESCRIPTIONPHOTOGRAPH
Narrow Profile Belt Drive Slide 1These compact belt drive slides provide rapid positioningat moderate resolution. They are available in strokes up to3 meters.
Blueline 1 Belt Drive SlideBelt drive slides for moderate load capacity with speeds upto 2.4 m/s. Protective aluminum housing around slide.Available in strokes up to 1.7 meters.
Blueline 3 Belt Drive SlideBelt drive slides for heavy load capacity with speeds up to5 m/s. Protective aluminum housing around slide.Available in strokes up to 2.6 meters.
ZF1 Belt Drive SlideBelt drive slides for light load capacity with speeds up to1.5 m/s. It has a small footprint and is economical.Available in strokes up to 2.8 meters.
78
80
82
84
90
96
NOTE: If motor cables are not purchased with the above slides, mating connectors are required. (See page 166)
Machines & Slides Selection Guide
Narrow Profile Slide 2These compact slides are ideal for moderate to heavyloads where space is a consideration. Available instrokes from 4" to 112".
Narrow Profile Slide 1These compact slides are ideal for light tomoderate loads where space is a consideration.Available in strokes from 4" to 51".
76Heavy-Duty Slide 2225 mm wide base for larger cantileveredload capacity. Available in strokes from 4" to 112".
Product Finder Home Page
Techno Linear Motion Catalog 58
MA
CH
INE
S&
SLID
ES
2
PAGEDESCRIPTIONPHOTOGRAPH
Machines & Slides Selection Guide
NOTE: If motor cables are not purchased with the above slides, mating connectors are required. (See page 166)
ZF3 Belt Drive SlideBelt drive slides for heavy load capacity with speeds up to5 m/s. Large cross section with 4 steel rails make slidesvery stable. Available in strokes up to 2.7 meters.
106
Rotary Table 1High-precision, high-load capacity, sealed rotary tables forpositioning or machining. Loads up to 1,000 kg. Resolutiondown to 6.5 seconds.Example applications: Heavy machining, positioning,turning of parts (when used with tailstock) and rotating ofaxes.
Rotary Table 2Moderate-precision, moderate-load capacity, loads up to500 kg. Resolution down to 8 seconds. Table not sealed,not suitable for use with cutting fluids.Example applications: Light machining, positioning and partindexing in automated assembly operations.
Rotary Table RFModerate-precision, moderate-load capacity, loads up to 500 kg.Resolution down to 8 seconds. Table not sealed, not suitablefor use with cutting fluids. Unit is compact with all parts belowrotating surface.Example applications: Light machining,positioning and part indexing in automated assembly operations.
AccessoriesIncludes bearing plates, spindles, work-holding components,machine stands, motor standoffs and XY Mounting Plates.
114
116
121
112
Rotary Table 5Suitable for applications which require light-load capacity,low torque and low speeds. Loads up to 23 kg. Resolutiondown to 11 seconds.Example application: Light machining and positioning.
118
100
ZF2 Belt Drive SlideBelt drive slides for heavy load capacity with speeds up to5 m/s. Low profile slide with 2:1 pulley assembly increasingtorque output. Available in strokes up to 2.7 meters.
Product Finder Home Page
Techno Linear Motion Catalog 59
MA
CH
INE
S&
SLID
ES
2
Turnkey Production Centers
FEATURES
����� Moving gantry provides large stationary worksurface
����� All axes provided with home reference switchand far end limit switch with ±0.01 mmrepeatability
����� Y-axis is provided with aluminum dust coverand plastic lip seals to provide protectionagainst contaminants
����� X-axis bearings and drive screw are mountedbeneath the work surface to protect them fromdust and debris
����� Touch and go joy stick, calibration touch pad
����� SAC motion control software included(see page 171)
����� All electronics and controls included
����� 2 patented double linear rails and 2 patenteddouble bearing blocks on each axis
����� All models come with servo motors andline driver optical rotary encoder, 1000 line
����� Anti-backlash screws on all axes
����� Rapid speeds up to 800 inches per minute
����� Cable carriers on all machines to route motorcables
����� Heavy welded steel machine base, ground flatand stress relieved with powder-coated finish
����� Available with optional vacuum table.Call factory for details
Applications Include: InspectionFluid DispensingParts TransferAssemblyAutomatic Welding
NOTE: Table shown with optional 19" Gantry clearance.
Product Finder Home Page
Techno Linear Motion Catalog 60
MA
CH
INE
S&
SLID
ES
2
Turnkey Production Centers
Gantry Clearance0 6 3/8" ( 8.7" Z travel)3 11" (12.7" Z travel)5 19" (16.6" Z travel)*
HX43VBM48�96010
CATALOG NUMBER
For 59" x 96" (Model 210) Machine
Gantry Clearance0 6 3/8" ( 8.7" Z travel)3 11" (12.7" Z travel)5 19" (16.6" Z travel)*
HX43VBM50�50�05
For 59" x 50" (Model 160) Machine
Gantry Clearance0 6 3/8" ( 8.7" Z travel)3 11" (12.7" Z travel)5 19" (16.6" Z travel)*Built to order. Call for delivery.
HX43VBM59�14010
For 59" x 144" (Model 260) Machine
Gantry Clearance0 6 3/8" ( 8.7" Z travel)3 11" (12.7" Z travel)5 19" (16.6" Z travel)*
HX43VBM59�12010
For 59" x 120" (Model 230) Machine
* For light loads only.** Open-frame machines have XY travel of 50" x 50".
Frame0 Closed1 Open**
Product Finder Home Page
Techno Linear Motion Catalog 61
MA
CH
INE
S&
SLID
ES
2
Turnkey Production Centers
59" x 50"59" x 80"
±.001"±.004 / 12" per axis
75 lbs800 in / min400 in / min
.0002" .008" / 12"
84-1/2"
30-29/32"
63-1/4"16-1/2"
12"L
T
50"
59"
A
* "A" dimension indicates Gantry clearance
TravelWork Surface Area
RepeatabilityPositioning AccuracyMaximum Z-Axis Load
Rapid Speed (Max.)Cutting Speed (Max.)
ResolutionTable Flatness
59" x 96"59" x 120"
±.001"±.004 / 12" per axis
75 lbs800 in / min400 in / min
.0002" .008" / 12"
SPECIFICATIONS HX43VBM48�96010 HX43VBM59�12010
59" x 120"59" x 144"
±.001"±.004 / 12" per axis
75 lbs800 in / min400 in / min
.0002" .008" / 12"
HX43VBM59�14010
59" x 144"59" x 168"
±.001"±.004 / 12" per axis
75 lbs800 in / min400 in / min
.0002".008" / 12"
HX43VBM50�50005
L: 83" for the 59" x 50" machine 121" for the 59" x 96" machine 148" for the 59" x 120" machine 168" for the 59" x 144" machine
A: 6.5"11"19.25"
*
Product Finder Home Page
Techno Linear Motion Catalog 62
MA
CH
INE
S&
SLID
ES
2
Gantry System III
015027040054067130
Motor DriveX No MotorV Servo MotorS Stepper MotorC Crank Handle
FEATURES
����� Moving gantry provides large stationary work surface
����� All axes provided with home reference switch and farend limit switch with ±0.01 mm repeatability
����� Y-axis is provided with aluminum dust cover andplastic lip seals to provide protection againstcontaminants
����� X-axis bearings and drive screw are mounted beneaththe work surface to protect them from dust and debris
����� 2 patented double linear rails and 4 patented doublebearing blocks on each axis
����� Models 015, 027, 040, 054 & 067 feature 125 oz• instepper motors, model HL2600M210001
����� Model 130 features 150 oz• in stepper motor, modelHL2600M210002 on bottom axis
����� All models with servo motor option feature motormodel HZ2600M1050XY3 with line driver optical rotary
encoder, 1000 line
XYZ GANTRY SELECTIONAn XYZ Gantry III consists of an XY Gantry III and a Z-Axis selected from page 66.
HL32000 0M201
Screw TypeB Ball ScrewX No Screw
05
Gantry Clearance2 200 mm3 300 mm5 500 mm
Table Sizemm (in)
Travel (X – Y)mm (in)Model
600 x 500 (23.6 x 19.6) 850 x 750 (33.4 x 29.5)1100 x 750 (43.3 x 29.5)1100 x 750 (53.1 x 29.5)1350 x 1000 (53.1 x 39.3)1750 x 1250 (68.8 x 49.2)
350 x 290 (13.7 x 11.4) 500 x 540 (19.6 x 21.2) 750 x 540 (29.5 x 21.2)1000 x 540 (39.3 x 21.2) 850 x 790 (33.4 x 31.1)1250 x 1040 (49.2 x 40.9)
����� Standard anti-backlash ball screw and nut, 16 mmdiameter with 5 mm pitch
����� Heavy cast aluminum side plates support the Y-axisand provide increased stiffness for cutting andpositioning applications
����� Standard clearance under the gantry is 200 mm(optional gantry clearance heights of 300 mm and500 mm available)
����� Work surface constructed of flat milled 30 x 250 mmaluminum table plates
����� Plastic guards not included
XY GANTRY SELECTION
CATALOG NUMBER
*EXAMPLE: To order an XY Gantry System with Stepper Motor (S), Ball
Screw (B), 200 mm Gantry Clearance (2) & 500 x 540 mmTravel (027), the Catalog Number is HL32SBM201202705.
*Gantry clearance on Model 015 is 125 mm.
*
For mating connectors and cables, see page 166. For machine stands, see page 130. For motor standoffs and couplings, see page 132.
Product Finder Home Page
Techno Linear Motion Catalog 63
MA
CH
INE
S&
SLID
ES
2
Gantry System III
50100150
A
Y-AXIS
DDETAIL 1 C
B
E
F
GH
8
isel
X-AXIS
175
100
200
220
DETAIL 1
8x, M6 TAPPED HOLES 8mm DP
4x, 6mm DIA. Holes
113
NOTES ON SPECIFICATIONS:Stepper motor is HL2600M210001 for models 015, 027, 040, 054, 067 and HL2600M210002for Model 130, as described on page 152, half step mode, with 4.5A / phase, 40V chopper driver.Servo motor is model HZ2600M1050XY3 as described on page 164, operating with 6A / 80Vchopper amplifier and 1000 line encoder operating in quadrature. These figures will of coursevary with different loads, amplifiers and acceleration profiles provided by the controller.
RepeatabilityAccuracy
Max. Z-Axis LoadMotor Drives
No Load SpeedThrust Force at Low Speed
Resolution
SPECIFICATIONS
±0.01 mm (± .0004 in)± 0.1 mm / 300 mm (± .004 in / 12 in)
22.7 kg (50 lb)Stepper
127 mm / sec (5 in / sec)91 kg (200 lb)
0.0125 mm (.0005 in)
Servo152 mm / sec (6 in / sec)
113 kg (250 lb)0.0025 mm (.0001 in)
ModelTravel mm
X Y
Amm
Bmm
Cmm
Dmm
Emm
Fmm
Gmm
Hmm
015027040054067130
290540540540790
1040
620870870870
11201370
425490490490490490
82410741074107411841434
125190190190190190
86911191119111912241474
456685935
118511851585
161018501100135013501750
328393393393393393
350500750
1000850
1250
Product Finder Home Page
Techno Linear Motion Catalog 64
MA
CH
INE
S&
SLID
ES
2
Z-Axis Slide for Gantry III
HL31SBM23051005HL31SBM512040005HL31SBM512050005HL31SBM512070005HL31VBM23051005HL31VBM512040005HL31VBM512050005HL31VBM512070005
Stepper
Servo
*
*
300 (11.8)400 (15.7)500 (19.6)700 (27.6)300 (11.8)400 (15.7)500 (19.6)700 (27.6)
EXAMPLE: To order a vertical use Z-Axis Slide with Stepper Motor, 5 mm Pitch Ball Screw & 275 mm Travel, the Catalog Number is HL31SBM512050005
NOTE: Also available without motor.*Spring counterbalance is used in place of magnetic brake.
80175275475 80175275475
(3.1)(6.8)
(10.8)(18.7)(3.1)(6.8)
(10.8)(18.7)
9 11.3 15.9
20 9.5 11.8 16.3 20.4
(20)(25)(35)(44)(21)(26)(36)(45)
Z-AXIS SLIDE SELECTION
� 4 T-Slots on 50 mm centers are provided to mounttooling
� Home reference switch and far end limit switch with±0.01 mm repeatability
� Aluminum dust cover with plastic lip seals to provide protection against contaminants
� All models with stepper motor option feature 150 oz•in stepper motor, model HL2600M210100
� All models with servo motor option feature motormodel HZ2600M0242610 with line driver opticalrotary encoder, 1000 line
� Features 2 patented double linear rails and 4 patenteddouble bearing blocks
� Standard anti-backlash ball screw and nut, 16 mmdiameter with 5 mm pitch
� Slide to slide mounting surface is flat milled aluminum220 x 175 x 8 mm with 4 holes counterbored for M6cap screws
� Self-locking magnetic brake to maintain carriageposition when power to the motor is turned off orinterrupted. 200 mA, 24V DC is required to disengagebrake. (Not available on models HL31SBM23051005and HL31VBM23051005)
FEATURES
Catalog Number Motor Lengthmm (in)
Travelmm (in)
Weightkg (lb)
For mating connectors and cables, see page 166. For motor standoffs and couplings, see page 132.
Product Finder Home Page
Techno Linear Motion Catalog 65
MA
CH
INE
S&
SLID
ES
2
Z-Axis Slide for Gantry III
43
6.35
THIS SURFACE MOUNTS TO GANTRY
L175
85
20OPTIONAL TOOLINGMOUNTED TO THIS SURFACE
1829.5
52.5
6887.5
17.550.5
67.592.5
115134.5
167.5
168
70
WITH STEPPER MOTORHOUSING & MAGNETIC BRAKE.REFER TO PAGE 164 FOR SERVO MOTOR ASSEMBLYDIMENSIONS
100
200
22092.5
185
6 mm REAMED HOLESON A 100 mm SQ., 4 PLACES
6.6 mm THRU HOLES11 mm C'BORE 5 mm DP, 4 PLACES
88
SPECIFICATIONS
RepeatabilityAccuracy
Max. Z-Axis LoadMotor Drives
No Load SpeedThrust Force at Low Speed
Resolution
±0.01 mm (±.0004 in)±0.1 mm / 300 mm (±.004 in / 12 in)
22.5 kg (50 lb)
127 mm / sec (5 in / sec)91 kg (200 lb)
0.0125 mm (.0005 in)
152 mm / sec (6 in / sec)113 kg (250 lb)
0.00125 mm (.00005 in)
Stepper Servo
NOTES ON SPECIFICATIONS: The stepper motor is model HL2600M210001 forHL31SBM23051005, and HL2600M210100 for all other StepperSlides, as described on page 152, operating in half step mode, with4.5A/phase, 40V chopper driver. The servo motor is modelHZ2600M1050XY3 for HL31VBM23051005, and HZ2600M0242610for all other Servo Slides, as described on page 164, operating with6A/80V chopper amplifier and 1000 line encoder operating inquadrature. These figures will of course vary with different loads,amplifiers and acceleration profiles provided by the controller.
Product Finder Home Page
Techno Linear Motion Catalog 66
MA
CH
INE
S&
SLID
ES
2
Wizard Machines
� All Wizards are complete systems with motorsand electronics for standalone operation
� Cantilevered style machine for easy loading andunloading of large parts
� Belt driven axis with speeds up to 800 mm / sec
� Ideal for inspection, fluid dispensing andautomatic screwdriving
� 16 inputs, 16 outputs
� All axes repeatable to 0.01 mm
� Programming via RS 232 port or optional teachpendant
� Can store up to 100 programs
� Microstep electronics for smooth, continuous motion
� Optional teach pendant allows programming andoperation of machine to be self-contained. No PCis needed
FEATURES
0 Without Teach Pendant1 With Teach Pendant
HH3 SPM2
CATALOG NUMBER
2 200 x 200 mm Travel4 400 x 400 mm Travel
2 2-Axis3 3-Axis4 4-Axis
0 Standard1 CE Compliant
Model 200 Model 400
(Optional rotary axis shown)
Complete Turnkey solutionswith accessories available for:
• Dispensing• Screw fastening• Soldering• CCD Camera/Inspection• PC board cutting
Call us for details.
Product Finder Home Page
Techno Linear Motion Catalog 67
MA
CH
INE
S&
SLID
ES
2
Wizard Machines
200 x 2005018
320 x 377 x 655± 0.01± 0.025 - 500
2.5 - 2506 - 600
76.53.5
Model 400
Travel (mm)Travel, z axis (mm)
Weight (kg)Dimensions (wxdxh)Repeatability (mm)
Repeatability of rotary axis (degrees)Speed XY, PTP (mm/sec)Speed Z, PTP (mm/sec)
Speed R, PTP (rpm)Work table load capacity (kg)
Z axis load capacity, 2 axis (kg)Z axis load capacity, 3 axis (kg)
Model 200SPECIFICATIONS
400 x 40015042
584 x 629 x 849± 0.01± 0.028 - 800
3.2 - 3208 - 800
11116
ACCESSORIES
377
8-M4(6 MM DP.)
12060
200(Y STROKE)110
655
50(Z STROKE)
320268
100
3113111
50
4-M4(5 MM DP.)
60
200 (X STROKE)
5023
128 483205
172
137
Model 200 Model 400
584
135
890
150(Z STROKE)
400(Y STROKE)
215 80145
629
(251)
120
60
12-M4(6 MM DP.)
120
(226)
60
(131)
80
50
23
400 (X STROKE)
170170
157
613350
125
25-M4(5 MM DP.)2 Ø5H6
(5 MM DP.)
Standard I/O Cable:HH6100MIOCABLE
Memory Card:HH6100MMEMCARD
Teach Pendant:HH6100MTEACHPEN
Remote Estop Button:HH6100MEXTESTOP
Product Finder Home Page
Techno Linear Motion Catalog 68
MA
CH
INE
S&
SLID
ES
2
FEATURES
����� Choice of 8" x 10" x 5" or 10" x 12" x 3.5"work envelope
����� The system includes a T-slotted work surface, 2cam clamps, 2 clamp bars (page 131), and a 900Watt variable high-speed spindle (page 128)
����� 16 mm diameter ball screw with 4 mm screw pitchon X, Y and Z axes, adjusted for zero backlashoperation
����� CNC and DNC programming via RS232 interface
����� T-slotted Z-axis face plate for easy mounting ofoptional tooling on 8" x 10" and 10" x 12" models
����� 3-axis linear and 2-axis circular interpolation
����� 1 Relay output
����� 32 kB RAM for program storage of up to 600-lineprogram in unit
����� Can be programmed in both incremental andabsolute coordinates
����� Comes fully assembled and ready-to-use,including RS232 cable
����� Includes 900 watt spindle, cam clamp and bars,and software-controlled 120V AC relay
DaVinci XYZ Systems
The DaVinci CNC Production Center is a 3-axis stepper motor-driven unit which incorporates an enclosedlinear bearing system with ground steel rails and recirculating bearings, as well as anti-backlash ball nutsand ball screws. This mechanical system provides durable play-free motion that is rigid and stiff enough forcutting, engraving, milling, routing, dispensing, inspection, etc. The DaVinci has all drive electronics built-inso that no separate controller is required. The DaVinci's size and weight mean it is both compact and sturdy,making it ideal for any number of CAD/CAM applications. Programming can be done using the easy-to-use,English-based, PAL software which comes with the system. It can also be programmed directly with ASCIIcodes. Interfaces, including HPGL and G-Code, are also available.
DAVINCI 1: HL33SBM242510 (8" x 10" x 5")DAVINCI 2: HL33SBM242512 (10" x 12" x 3.5")
CATALOG NUMBER
DAVINCI 18" x 10" x 5"
(80 lbs)
DAVINCI 210" x 12" x 3.5"
(95 lbs)
READY TO
USE OUT OF
THE BOX!!!
Product Finder Home Page
Techno Linear Motion Catalog 69
MA
CH
INE
S&
SLID
ES
2
1040 x 700 x 770 mm (41" x 28" x 30")
< 0.01 mm (< .0005 in) per axis
< 0.05 mm (< .002 in) per axis
6.8 kg (15 lbs)
0.3 – 60 mm / sec (.1 – 2.36 in / sec)
0.3 – 40 mm / sec (.1 – 1.58 in / sec)
0.01 mm (.0004 in)
Weight
Dimensions
Repeatability
Accuracy
Vertical Static Load Capacity
Single Axis No Load Speed
2-Axis Interpolation Speed
Resolution
NOTES ON SPECIFICATIONS: Stepper motor is model HL2100M473030, operating in half-step mode,with 3.1A / phase, 40V chopper driver.
DaVinci XYZ Systems
950 x 650 x 650 mm (37" x 26" x 26")
SPECIFICATIONS DAVINCI 2
250 x 300 x 90 mm (10" x 12" x 3.5")
43 kg (95 lbs)36 kg (80 lbs)
200 x 250 x 125 mm (8" x 10" x 5")Travel
DAVINCI 1
770 190 90 520 7451040 700
NOTE: Dimensions are in mm
ABCDEFG
650190125470700950650
DAVINCI 2Dimension DAVINCI 1
Product Finder Home Page
Techno Linear Motion Catalog 70
MA
CH
INE
S&
SLID
ES
2
FEATURES
����� Choice of 200 x 175 x 90 mm or 295 x 200 x 130 mmwork envelope
����� Can be supplied with or without electronics
����� 16 mm diameter ball screws with either 4 mmor 10 mm pitch
����� CNC or DNC programming via RS232
����� T-slotted Z-axis face plate for easy mounting ofoptional tooling
����� 3-axis linear and 2-axis circular interpolation whenused with optional electronics
����� Safety enclosure with safety interlock switch
����� Comes fully assembled and READY TO USE
����� All machines come with stepper motors installedand wired
HL33SBMCPM
CATALOG NUMBER
Travel2018 200 x 175 x 90 mm3020 295 x 200 x 130 mm
0 With electronics package1 No electronics
READY TO
USE OUT OF
THE BOX!!!
0 4 mm pitch1 10 mm pitch
CPM Series Machines
NOTE: This machine is CE compliant.
Product Finder Home Page
Techno Linear Motion Catalog 71
MA
CH
INE
S&
SLID
ES
2
<0.01 mm (<.0004 in)
<0.05 mm (<.002 in)
6.8 kg (15 lbs)
60 mm / sec (2.3 in / sec)
24 mm / sec (1 in / sec)
0.025 mm (.001 in)
0.01 mm (.0004 in)
Travel
Weight
Outside Dimensions
Repeatability
Accuracy
Vertical Static Load Capacity (Z-Axis)
No Load Speed (10 mm screws)
No Load Speed (4 mm screws)
Resolution (10 mm screws)
Resolution (4 mm screws)
Electronics Package: • Includes 3-axis microstep controller installed and wired inside machine. • 400 watt high-speed spindle (8-22K rpm).
CPM2018
295 x 200 x 130 mm (11.6 x 7.87 x 5.1 in)
76 kg (167 lbs)
610 x 655 x 705 mm (24.1 x 25.8 x 27.8 in)
Specifications
Catalog Number
200 x 175 x 90 mm (7.87 x 6.89 x 3.54 in)
71 kg (156 lbs)
515 x 580 x 615 mm (20.3 x 22.9 x 24.2 in)
CPM3020
Gantry Clearance
515
250 x 425
580
615
CPM 2018
CPM 3020
610
250 x 500
655
705
Gantry Clearance
90
115
CPM Series Machines
Product Finder Home Page
Techno Linear Motion Catalog 72
MA
CH
INE
S&
SLID
ES
2
101102201
189 (7.4) 257 (10.1)
257 (10.1)
620 (24.4)620 (24.4)970 (38.2)
Motor DriveX No MotorV Servo MotorS Stepper MotorC Crank Handle
Bridge Mounted Slide
FEATURES
EXAMPLE: To order a Bridge Mounted Slide with Stepper Motor (S),5 mm Pitch Ball Screw (B) & 500 mm Travel (201), theCatalog Number is HL31SBM24220105.
CATALOG NUMBER
HL31000 0M2420 0 0 005
Screw TypeB Ball ScrewX No Screw
Lengthmm (in)Model
Travelmm (in)
0290 (11.4) 290 (11.4)0500 (19.6)
Heightmm (in)
EXAMPLE OF XYZPositioning system with bridgemounted Y-slide
(X- & Z-slides not included)
EXAMPLE OF XYPositioning system with bridgemounted Y-slide
(X-slide not included)
EXAMPLE OF YZPositioning system with bridgemounted Y-slide
(Z-slide not included)
����� Heavy cast aluminum side plates support the axisabove a work surface
����� Home reference and far end limit switch with ±0.01 mmrepeatability
����� Features 2 patented double linear rails and 4 patenteddouble bearing blocks
����� Fitted with plastic lip seals to guard againstcontaminants
����� All models with stepper motor option feature 125 oz • in stepper motor, model HL2600M210001
����� All models with servo motor option feature motormodel HZ2600M1050XY3 with line driver optical
rotary encoder, 1000 line
����� Standard anti-backlash ball screw and nut, 16 mmdiameter with 5 mm pitch
����� Work surface is flat milled aluminum 220 x 175 x8 mm with 8 drilled and tapped M6 mounting holes
����� Choice of two travel lengths with two workingheights
����� Ready to accept Z-slide and standard-duty slidefor XY, YZ and XYZ configurations
BRIDGE MOUNTED SLIDE SELECTION
For mating connectors and cables, see page 166. For motor standoffs and couplings, see page 132.
Product Finder Home Page
Techno Linear Motion Catalog 73
MA
CH
INE
S&
SLID
ES
2
194270270
215296296
610610820
445445655
189257257
422490490
325393393
290290500
610610820
RepeatabilityAccuracy
Max. Vertical Static LoadMotor Drives
No Load SpeedThrust Force at Low Speed
Resolution
Bridge Mounted Slide
A
C
B
Y-AXIS
DETAIL 1
D
MOUNTING SURFACEFOR Z-AXIS
F
E
MOUNTING SURFACEFOR X-AXIS
GH100 50
100
6 mm DIA 4 PLACES8, M6 TAPPED HOLES 8 mm DP
200
220
150175
DETAIL 1
SPECIFICATIONS
± 0.01 mm (± .0004 in)± 0.1 mm / 300 mm (± .004 in / 12 in)
22.7 kg (50 lb)
NOTES ON SPECIFICATIONS: Stepper motor is model HL2600M210001 as described onpage 152, operating in half step mode, with 4.5A / phase,40V chopper driver. Servo motor is model HZ2600M1050XY3as described on page 164, operating with 6A/80V chopperamplifier and 1000 line encoder operating in quadrature.These figures will, of course, vary with different loads,amplifiers and acceleration profiles provided by the controller.
Servo152 mm / sec (6 in / sec)
113 kg (250 lb)0.0025 mm (.0001 in)
Stepper127 mm / sec (5 in / sec)
91 kg (200 lb)0.0125 mm (.0005 in)
Bmm
Fmm
Gmm
Emm
Dmm
Cmm
Amm
Travelmm
101102201
Hmm
Model
Product Finder Home Page
Techno Linear Motion Catalog 74
MA
CH
INE
S&
SLID
ES
2
Standard-Duty Slide
FEATURES
����� 30 x 175 mm base plate
����� Home reference switch and far end limit switch with±0.01 mm repeatability
����� Aluminum dust cover with plastic lip seals toprotect against contaminants
����� Features 2 patented double linear rails and4 patented double bearing blocks
����� All models with stepper motor option feature 125oz • in stepper motor, model HL2600M210001
����� All models with servo motor option feature motormodel HZ2600M1050XY3 with line driver optical rotaryencoder, 1000 line
����� Standard anti-backlash ball screw and nut, 16 mmdiameter with 5 mm pitch for play-free, precise motion
����� Work surface is flat milled aluminum 220 x 175 x 8mm with 8 drilled and tapped M6 mounting holes
����� Optional ball screw is 16 mm diameter, 10 mm or 20mm pitch
CATALOG NUMBERHL31000 0M601
Motor DriveX No MotorV Servo MotorS Stepper MotorC Crank Handle
Screw TypeB Ball ScrewX No Screw
Screw Pitch05 5 mm10 10 mm20 20 mm
EXAMPLE: To order a Standard-Duty Slide with Stepper Motor (S),5 mm Pitch Ball Screw (B) & 175 mm Travel (0400), theCatalog Number is HL31SBM601040005.
Length, L1mm (in)
Travelmm (in)
Weightkg (lb)
7.3 (16) 9.5 (21)11.8 (26)13.6 (30)19.0 (42)20.0 (44)22.2 (49)25.0 (55)27.2 (60)30.0 (66)
0075 0(2.9)0175 0(6.8)0275 (10.8)0375 (14.7)0625 (24.6)0775 (30.4)0875 (34.4)1025 (40.3)1130 (44.5)1275 (50.1)
300 (11.8) 400 (15.7) 500 (19.6) 600 (23.6) 850 (33.4)1000 (39.3)1100 (43.3)1250 (49.2)1350 (53.1)1500 (59.0)
0300040005000600085010001100125013501500
Code
STANDARD-DUTY SLIDE SELECTION
XYZ configurations possible withmounting plates on pages 126 and 127.
For mating connectors and cables, see page 166. For motor standoffs and couplings, see page 132.
Product Finder Home Page
Techno Linear Motion Catalog 75
MA
CH
INE
S&
SLID
ES
2
Standard-Duty Slide
NOTES ON SPECIFICATIONS:Stepper motor is model HL2600M210001 as described on page 152, operating in half step mode,with 4.5A / phase,40V chopper driver. Servo motor is model HZ2600M1050XY3 as described onpage 164, operating with 6A / 80V chopper amplifier and 1000 line encoder operating in quadrature.These figures will, of course, vary with different loads, amplifiers and acceleration profiles providedby the controller.
Repeatability
Accuracy
Vertical Static Load Capacity
± 0.01 mm (± .0004 in)
± 0.1 mm / 300 mm (± .004 in / 12 in)
113 kg (250 lb)
Ball Screw Pitchmm
Thrust Force atLow Speeds, kg (lb)
No Load Speedmm/sec (in/sec)
Resolutionmm (in)Motor Drive
5
10
20
5
10
20
91 (200)
45 (100)
23 (50)
113 (250)
57 (125)
28 (63)
127 (5)
254 (10)
510 (20)
152 (6)
305 (12)
610 (24)
0.0125 (.0005)
0.025 (.001)
0.05 (.002)
0.0025 (.0001)
0.005 (.0002)
0.01 (.0004)
StepperMotor
ServoMotor
SPECIFICATIONS
43
L1220
8
85
8
6.35
20.5
200
185
92.5
175 70
50
166143
STEPPER MOTORHOUSING
1829.5
52.5
6887.5
4, M6 TAPPEDHOLES 8 mm DP
134.5115
92.550.5
17.567.5
117.5167.5
8 M6 TAPPED HOLES 8 mm DP 50 mm apart4 REAMED HOLES Ø6 mm on 100 mm SQ.
Product Finder Home Page
Techno Linear Motion Catalog 76
MA
CH
INE
S&
SLID
ES
2
Pitch CodeBlank for no screw02 2.5 mm05 5 mm10 10 mm20 20 mm
03900490059006900790089009901090
HL31HDMB
Heavy-Duty Slide 2
Motor DriveS Stepper, 150 oz • inV Servo, 120 WX No motor
EXAMPLE: To order a Heavy-Duty Slide 2 with ServoMotor (V), 10 mm pitch Ball Screw (B),and 390 mm length, the catalog numberis HL31HDMB039010V.
FEATURES
HEAVY-DUTY SLIDE SELECTION
Lengthmm (in)
Code Lengthmm (in)
Code
����� Constructed from a single rigid aluminum extrusionprofile with aluminum end plates and a fully enclosedmotor assembly
����� Compact, modular design with T-slotted extrusionsfor easy mounting
����� Available with 150 oz • in stepper motor or 120Wservo motor option
����� Fitted with plastic seals to guard against contaminants
����� Home reference and far end limit switch with arepeatability of ± 0.01 mm
����� Four precision steel rails Ø12h6 with four singlepiece steel bearing blocks all hardened to HRC62 ± 2
����� Anti-backlash Ø16 mm ball screw drives with pitchesof 2.5, 5, 10 and 20 mm available
����� Linear carriage is capable of speed up to 5 m/sec.
for Heavy Loads
1190 (46.9)1290 (50.8)1390 (54.7)1490 (58.7)1790 (70.5)1990 (78.3)2490 (98.0)2990 (117.7)
11901290139014901790199024902990
390 (15.4) 490 (19.3) 590 (23.2) 690 (27.2) 790 (31.1) 890 (35.0) 990 (39.0)1090 (42.9)
Travelmm (in)
122 (4.8)222 (8.7)322 (12.7)422 (16.6)522 (20.6)622 (24.5)722 (28.4)822 (32.4)
Travelmm (in)
922 (36.3)1022 (40.2)1122 (44.2)1222 (48.1)1522 (59.9)1722 (68.0)2222 (87.5)2722 (107.2)
Internal motor mount and two bearing block configurations available upon request.
CATALOG NUMBER
(Carriage Plate Included)
XYZ configurations possible withmounting plates on pages 126 and 127.
For mating connectors and cables, see page 166. For motor standoffs and couplings, see page 132.
Product Finder Home Page
Techno Linear Motion Catalog 77
MA
CH
INE
S&
SLID
ES
2
for Heavy Loads
± 0.01 mm (± .0004 in)
± 0.1 mm / 300 mm (± .004 in / 12 in)
180 lb / bearing block
Repeatability
Accuracy
Vertical Static Load Capacity
NOTES ON SPECIFICATIONS: Stepper motor is model HL2600M3989001 as described on page 152,operating in half step mode, with 4.5A / phase, 40V chopper driver.Servo motor is model HZ2600M0242601 as described on page 164,operating with 6A / 80V chopper amplifier and 1000 line encoderoperating in quadrature. These figures will, of course, vary with differentloads, amplifiers and acceleration profiles provided by the controller.
MotorDrive
Ball ScrewPitchmm
Resolutionmm (in)
No LoadSpeed
mm/sec (in/sec)
Thrust Force@ Low Speeds
kg (lb)
2.5
5
10
20
2.5
5
10
20
ServoMotor
StepperMotor
182 (400)
91 (200)
45 (100)
23 (50)
226 (500)
113 (250)
57 (125)
28 (63)
64 (2.5)
127 (5)
254 (10)
508 (20)
77 (3)
152 (6)
305 (12)
610 (24)
0.0062 (.0002)
0.0125 (.0005)
0.0250 (.0098)
0.0500 (.0197)
0.0013 (.00005)
0.0025 (.0001)
0.0050 (.0002)
0.0100 (.0004)
SPECIFICATIONS
27
25L
15
77.7
75
STEPPER MOTOR MODULE
200
47.247.2
49
47.2
79.5
4 x M5
4 x M5
150225
47.2
Ø8h7
Heavy-Duty Slide 2
Product Finder Home Page
Techno Linear Motion Catalog 78
MA
CH
INE
S&
SLID
ES
2 2.7 (6) 4 (9) 5.9 (13) 6.8 (15) 9 (20)10.4 (23)11.3 (25)12.7 (28)14 (31)15 (33)
0100 0(3.9)0200 0(7.8)0300 (11.8)0400 (15.7)0650 (21.6)0800 (31.4)0900 (35.4)1050 (41.3)1150 (43.2)1300 (51.1)
300 (11.8) 400 (15.7) 500 (19.6) 600 (23.6) 850 (33.4)1000 (39.3)1100 (43.3)1250 (49.2)1300 (53.1)1500 (59.0)
Motor DriveX No MotorV Servo MotorS Stepper MotorC Crank Handle
CATALOG NUMBER
Narrow Profile Slide 1
FEATURES
HL31000 0M501
Screw TypeB Ball ScrewX No Screw
Screw Pitch05 5 mm10 10 mm20 20 mm
EXAMPLE: To order a Narrow Profile Slide with StepperMotor (S), 5 mm Pitch Ball Screw (B) & 200 mmTravel (0400), the Catalog Number isHL31SBM501040005
����� Narrow profile housing built from a single rigid, clearanodized aluminum extrusion
����� Aluminum dust cover with plastic lip seals to protectagainst contaminants
����� All models with stepper motor option feature 125oz•in stepper motor, model HL2600M210001
����� All models with servo motor option feature motormodel HZ2600M1050XY3 with line driver opticalrotary encoder, 1000 line
����� Home reference and far end limit switch with arepeatability of ±0.01 mm
����� Patented double linear rail and patented doublebearing block
����� Standard anti-backlash ball screw and nut, 16 mmdiameter with 5 mm pitch
����� Work surface is flat milled aluminum 125 x 65 x 8 mmwith 6 drilled and tapped M6 mounting holes
����� Optional ball screw is 16 mm diameter, 10 mm or 20mm pitch
Length, L1mm (in)
Travelmm (in)
Weightkg (lb)
Code
0300040005000600085010001100125013001500
STANDARD-DUTY SLIDE SELECTION
For mating connectors and cables, see page 166.For motor standoffs and couplings, see page 132.
Product Finder Home Page
Techno Linear Motion Catalog 79
MA
CH
INE
S&
SLID
ES
2
Narrow Profile Slide 1
NOTES ON SPECIFICATIONS: Stepper motor is model HL2600M210001 as described on page 152,operating in half step mode, with 4.5A / phase, 40V chopper driver.Servo motor is model HZ2600M1050XY3 as described on page 164,operating with 6A / 80V chopper amplifier and 1000 line encoderoperating in quadrature. These figures will, of course, vary withdifferent loads, amplifiers and acceleration profiles provided by thecontroller.
Repeatability
Accuracy
Vertical Static Load Capacity
SPECIFICATIONS
± 0.01 mm (± .0004 in)
± 0.1 mm / 300 mm (± .004 in / 12 in)
23 kg (50 lb)
Ball Screw Pitchmm
Thrust Force atLow Speeds, kg (lb)
No Load Speedmm/sec (in/sec)
Resolutionmm (in)Motor Drive
5
10
20
5
10
20
91 (200)
45 (100)
23 (50)
113 (250)
57 (125)
28 (63)
127 (5)
254 (10)
510 (20)
152 (6)
305 (12)
610 (24)
0.0125 (.0005)
0.025 (.001)
0.05 (.002)
0.0025 (.0001)
0.005 (.0002)
0.01 (.0004)
StepperMotor
ServoMotor
20.5
1
LENGTH L-4 MM8 8
92
2529 TRAVEL = LENGTH L-200MM
Table Plate End of Travel Table Plate End of Travel84
48
X
71
17.552.5
21
47.2
102
46
M5
47.2
70
125
6 x M6
50 50
50
65
143
STEPPER MOTOR MODULE
166
70
10.5
6.5
6.52
X1:1
Ø12
Ø6.35 H7
Ø50
DETAILS OF T-SLOT
Product Finder Home Page
Techno Linear Motion Catalog 80
MA
CH
INE
S&
SLID
ES
2
Motor DriveS Stepper, 150 oz⋅inV Servo, 120 WX No motor
HL31NPMB
HEAVY-DUTY SLIDE SELECTION
CATALOG NUMBER
EXAMPLE: To order a Narrow Profile Slide 2 with ServoMotor (V), 10 mm Ball Screw (B), 1 screw and 2carriages (3), and 390 mm length, the CatalogNumber is HL31NPMB0390103V.
Pitch Code00 No screw02 2.5 mm05 5 mm10 10 mm20 20 mm
FEATURES
����� Constructed from a single rigid aluminum extrusionprofile with aluminum end plates
����� Compact, modular design with T-slotted extrusions foreasy mounting
����� Available with 150 oz • in stepper motor or 120W servomotor
����� Fitted with plastic seals to guard against contaminants
����� Home reference and far end limit switch with arepeatability of ± 0.01 mm
����� Two precision steel rails Ø12h6 with either one ortwo single piece steel bearing blocks hardened toHRC 62 ± 2
����� Anti-backlash Ø16 mm ball screw drives with pitchesof 2.5, 5, 10 and 20 mm available
����� Linear carriage is capable of speed up to 5 m/sec.
Lengthmm (in)
Code Lengthmm (in)Code
03900490059006900790089009901090
1190 (46.9)1290 (50.8)1390 (54.7)1490 (58.7)1790 (70.5)1990 (78.3)2490 (98.0)2990 (117.7)
11901290139014901790199024902990
390 (15.4) 490 (19.3) 590 (23.2) 690 (27.2) 790 (31.1) 890 (35.0) 990 (39.0)1090 (42.9)
Travel*mm (in)
122 (4.8)222 (8.7)322 (12.7)422 (16.6)522 (20.6)622 (24.5)722 (28.4)822 (32.4)
Travel*mm (in)
922 (36.3)1022 (40.2)1122 (44.2)1222 (48.1)1522 (59.9)1722 (68.0)2222 (87.5)2722 (107.2)
*Travel spec is based on a slide with 2 bearings. For a slide with only one bearing, add 130 mm (5.1 in) to the travel. Dimension L is unchanged.
Setup2 1 Carriage3 2 Carriages
(Carriage Plate Included)
For mating connectorsand cables, see page 166.For motor standoffs andcouplings, see page 132.
Narrow Profile Slide 2for Heavy Loads
Product Finder Home Page
Techno Linear Motion Catalog 81
MA
CH
INE
S&
SLID
ES
2
± 0.01 mm (± .0004 in)± 0.1 mm / 300 mm (± .004 in / in)
125 lb / bearing block
RepeatabilityAccuracy
Vertical Static Load Capacity
Ball ScrewPitchmm
Resolutionmm (in)
Thrust Force@ Low Speeds
kg (lb)
2.5 51020
2.5 51020
182 (400) 91 (200) 45 (100) 23 (50)226 (500)113 (250) 57 (125) 28 (63)
64 (2.5)127 (5.0)254 (10.0)508 (20.0) 77 (3.0)152 (6.0)305 (12.0)610 (24.0)
0.0062 (.0002)0.0125 (.0005)0.0250 (.0098)0.0500 (.0197)0.0013 (.00005)0.0025 (.00010)0.0050 (.00020)0.0100 (.00040)
No LoadSpeed
mm/sec (in/sec)
NOTES ON SPECIFICATIONS: Stepper motor is model HL2600M3989001 as described on page 152,operating in half step mode, with 4.5A / phase, 40V chopper driver.Servo motor is model HZ2600M0242601 as described on page 164,operating with 6A / 80V chopper amplifier and 1000 line encoderoperating in quadrature. These figures will, of course, vary with differentloads, amplifiers and acceleration profiles provided by the controller.
MotorDrive
ServoMotor
StepperMotor
SPECIFICATIONS
2 T-SLOTS ON 50 mm CENTERS
77.7
15L
25
27 47.2
47.2
79.54 x M5
49 75
STEPPER MOTOR MODULE
75
200
Ø8h7
Narrow Profile Slide 2for Heavy Loads
Product Finder Home Page
Techno Linear Motion Catalog 82
MA
CH
INE
S&
SLID
ES
2
Narrow Profile Belt Drive Slide 1
FEATURES
HL31 PM003
Motor DriveX No MotorV Servo MotorS Stepper MotorC Crank Handle
CATALOG NUMBER
100 (3.9) 200 (7.8) 300 (11.8) 400 (15.7) 500 (19.6) 650 (25.6) 800 (31.4) 900 (35.4)1050 (41.3)1150 (45.3)1300 (51.1)1800 (70.9)2300 (90.6)2800 (110.3)
300 (11.8) 400 (15.7) 500 (19.6) 600 (23.6) 700 (27.6) 850 (33.4)1000 (39.3)1100 (43.3)1250 (49.2)1350 (53.1)1500 (59.0)2000 (78.7)2500 (98.4)3000 (118.1)
Length, L1mm (in)
Travelmm (in)
����� Constructed from a single rigid aluminum extrusionprofile
����� Tooth belt drive with virtually no backlash
����� Home reference and far end limit switches with ±0.01mm repeatability
����� All models with stepper motor option feature 125 oz • instepper motor, model HL2600M210022
����� All models with servo motor option feature motormodel HZ2600M0242601 with line driver optical rotaryencoder, 1000 line
����� Patented double linear rail and patented doublebearing block
����� Fitted with plastic seals to guard against contaminants
����� Work surface is flat milled aluminum 125 x 65 x 8 mmwith 6 drilled and tapped M6 tapped holes.
EXAMPLE: To order a Narrow Belt Drive Slide 1 withStepper Motor (S) & 200 mm Travel (0400),the Catalog Number is HL31SPM0030400
NARROW PROFILE BELT DRIVE SLIDE 1SELECTION
03000400050006000700085010001100125013501500200025003000
Code
For mating connectors and cables, see page 166. For motor standoffs and couplings, see page 132.
Product Finder Home Page
Techno Linear Motion Catalog 83
MA
CH
INE
S&
SLID
ES
2
Stepper1 m / sec
20 lbs0.05 mm (.002 in)
SPECIFICATIONS
± 0.1 mm (± .004 in)± 0.2 mm / m (± .002 in / 10 in)
22.5 kg (50 lbs)
NOTES ON SPECIFICATIONS: Stepper motor is model HL2600M210022 as described on page 152,operating in half step mode, with 4.5A / phase, 40V chopper driver.Servo motor is model HZ2600M0242601 as described on page 164,operating with 6A / 80V chopper amplifier and 1000-line encoderoperating in quadrature. These figures will, of course, vary with differentloads, amplifiers and acceleration profiles provided by the controller.
RepeatabilityAccuracy
Vertical Static Load CapacityMotor Drives
No Load SpeedThrust Force at Low Speed
Resolution
Servo1.2 m / sec
25 lbs0.01 mm (.0004 in)
Narrow Profile Belt Drive Slide 1
5835
4 x M6
47.2 50
L1=L+100 mm
92
10.5 10.547.2
4 x M5
40 Length L-4 mm 60
6.5
6
4.5
80
10.5
1048
2717
70
6 x M6
100
125
50
65
CARRIAGE PLATE END OF TRAVEL
Ø6.35
Carriage Plate
Product Finder Home Page
Techno Linear Motion Catalog 84
MA
CH
INE
S&
SLID
ES
2
Blueline 1Belt Drive Slide
For mating connectors and cables, see page 166. For motor standoffs and couplings, see page 132.
� Carriage rides on two Ø8 mm precision groundsteel shafts that are supported along the entirelength of travel to minimize deflection
� Lengths up to 2 meters
� Resolution is 0.12 mm/step in half-step mode and0.012 mm/pulse with standard servo motor
� Available with either a 160 N •cm stepper motor,120W servo motor or no motor
� Maximum speed: 2.4 m/s
� Belt is 3 mm HTD, 15 mm wide. HTD belt profilehelps reduce backlash
� Home and end reference switch repeatable to < 0.1 mm
FEATURES
Motor TypeX No motorV Servo motorS Stepper motor
CodeLength (mm)
Travel (mm)
045055065075085095105115125135145155165175185195205
450 550 650 750 850 95010501150125013501450155016501750185019502050
143 243 343 443 543 643 743 843 94310431143124313431443154316431743
BLUELINE 1 BELT DRIVE SELECTION
CATALOG NUMBERHL3101MP
Motor Mounting0 Right-hand side1 Left-hand side
Product Finder Home Page
Techno Linear Motion Catalog 85
MA
CH
INE
S&
SLID
ES
2
Maximum acceleration based on belt specifications:Blueline 1
Blueline 1Belt Drive Slide
• Belt type: 3 mm HTD, 15 mm wide• Mass of carriage: 0.730 kg• Weight without motor module: 6.25 kg/1000 mm• Specific mass of belt: 0.0375 kg/1000 mm• Diameter of pulley: 15.28 mm• Pulley mass moment of inertia: 1.461 x 10–6 kg • m2
• Effective circumference: 48 mmNOTE: One revolution of motor shaft produces 48 mm of linear
travel. This determines travel resolution.
[m/s2]
[kg]
1 g = 9.81 m/s2
No loadspeed(rpm)
No loadtorque(N • m)
50015003000
0.060.090.13
Technical Data
72.5
599370.5
150
L + 5 mm
L125
56 SQ
30
47.2 SQ.
Travel = L - 307 mm 109.5
M5
52.6
29.75
6.5
10.537
116.5
1008 h9
Y
Y
Z
Z
5080
100116.5
8 h9
65
21.25
8.5
7 3
6.5
10.5
Shown withoptional feet
Product Finder Home Page
Techno Linear Motion Catalog 86
MA
CH
INE
S&
SLID
ES
2
Blueline 1Foot Mount & 90° Carriage Mount
X
X6.510.5
39
100
100
3 13.7
12116.5
13.7
2
6100
116.5
66.519.5
50
90° Carriage Mount
Ø6.5
Ø6.5
Ø11
Foot MountHL4700M232199
90° Carriage MountHL4700M232100
Load 1
Load 2
F
F
L
L
400 N
200 N
100 N
800 N
400 N
200 N
4
3.5
3
2.5
2
1.5
1
0.5
0500 1000 2000 3000
Length (mm)
Def
lect
ion
(m
m)
Deflection Chart – Blueline 1
22.5
55.5
100
173.25
65
Mounting foot
Optional 90 Carriage Mount shown on slide
Optional Foot Mount shown on slide
Foot MountAssembly End View
40
22.5
116.5
100
50
Ø6.5
Ø11
Ø6.5
°
Product Finder Home Page
Techno Linear Motion Catalog 87
MA
CH
INE
S&
SLID
ES
2
Blueline 1Belt Drive Slide
125100
7550
22.5
25
50
33.25
100
116.5
A
AA-A
Ø6.5 (x8)
Ltw = a – 145 mm
where:a = Distance between axesLtw = Transmission bar length
0.02 A
0.05 A
0.05 A
0.05 A
30 30
10
A
A
B
B
15.5
20M6
B-B
A-A
10.5
15M6
210
Carriage Plate
Moment of Inertia
For Coupling:JK = 4.258 • 10–5 Kg • m2
For Transmission Bar:JTRS = 2.513 • 10–6 Kg • m2/100 mm
Transmission Bar
Motormount left
Motormount right
Coupling for Transmission Bar
HL5500M218051 – Coupling for Ø20 mm Transmission Bar(two are included per set)
Ltwa
Ø20
Ø20.05
Ø6.6
Ø11
Ø45Ø35
Ø6.6
Ø11
Ø8 H7
Ø11(x4)
Ø6.5(x4)
Plate stationary, slide moves
Slide stationary, plate moves
HL5500M219002-1 – 1 meter longHL5500M219002-2 – 2 meters long
Product Finder Home Page
Techno Linear Motion Catalog 88
MA
CH
INE
S&
SLID
ES
2
Blueline 1Motor Assembly Information
Specifications
DC Servo Motor CATALOG NUMBER: HZ2600M0242601
Power ....................................................... 120WMaximum Operating Speed .................... 6000 rpmContinuous Stall Torque ......................... 50 oz • inMaximum Continuous Current .............. 4.2A
Stepper Motor CATALOG NUMBER: HL2600M210022
Maximum Terminal Voltage .................... 60VPeak Stall Torque .................................... 350 oz • inMaximum Pulse Current ......................... 31AOperating Temperature ........................... 0°C to 40°C
Holding Torque (bipolar) ........................ 160 N •cmSteps Full ...................................... 1.8°
Half ...................................... 0.9°Voltage (bipolar) ...................................... 1.7V
Specifications
Resistance ............................................... 1.2Inductance ............................................... 2.2mHCurrent (bipolar) ...................................... 4.1A
56.50 SQ.132.59
47.2 SQ. 246.21
47Ø5
(4 PLACES)
113.556.5 SQ.
36.5 SQ.
18.6
6.35
159.663
21.57
47.2 SQ.
M5
Ø58
Product Finder Home Page
Techno Linear Motion Catalog 89
MA
CH
INE
S&
SLID
ES
2
Application Examples
2-Axis H-DesignFormat #63 x Blueline 1(2) 90° Carriage Mounts(1) Transmission-shaft Bar(12) Mounting feet(1) Coupling set
2-Axis CantileverFormat #71 x Blueline 11 x Blueline 3(1) 90° Carriage Mount(3) Mounting feet
Suggested Applications:• Transfer Systems• In-House Automation• Pick & Place
Product Finder Home Page
Techno Linear Motion Catalog 90
MA
CH
INE
S&
SLID
ES
2
Blueline 3Belt Drive Slide
� Carriage rides on two Ø8 mm precision groundsteel shafts that are supported along the entirelength of travel to minimize deflection
� Lengths up to 3 meters
� Resolution is 0.175 mm/step in half-step mode and0.0175 mm/pulse with standard Servo motor
� Available with either a 600 N •cm stepper motor,300W servo motor or no motor
� Maximum speed: 5 m/s
� Belt is 5 mm HTD, 25 mm wide. HTD belt profile.helps reduce backlash
� Home and end reference switch repeatable to < 0.1 mm
HL3103MP
Motor TypeX No motorV Servo motorS Stepper motor
Code Length (mm)
Travel(mm)
080110120160210260290300
8001100120016002100260029003000
400 700 80012001700220025002600
BLUELINE 3 BELT DRIVE SELECTION
Motor Mounting0 Right-hand side1 Left-hand side
CATALOG NUMBER
FEATURES
For mating connectors and cables, see page 166. For motor standoffs and couplings, see page 132.
Product Finder Home Page
Techno Linear Motion Catalog 91
MA
CH
INE
S&
SLID
ES
2
Blueline 3Belt Drive Slide
[m/s2]
[kg]Maximum acceleration based on belt specifications:
Blueline 3
1 g = 9.81 m/s2
No loadspeed(rpm)
No loadtorque(N • m)
50015003000
0.160.240.36
35.5
176.5160140
128
160
176.5
209.6
X
92.5
87
81 143
M6
R27 42.5
122.5
40
35.5
Travel = Length L - 400
Slide Length L + 5
Slide Length L7
46.5
10.5
176
Motor Mount64 x 64 x 8
826
35X
Shown withoptional feet
Ø12
• Belt type: 5 mm HTD, 25 mm wide• Mass of carriage: 1.530 kg• Weight without motor module: 12 kg/1000 mm• Specific mass of belt: 0.09 kg/m• Diameter of pulley: 22.28 mm• Pulley mass moment of inertia: 8.542 x 10–5 kg • m2
• Effective circumference: 70 mmNOTE: One revolution of motor shaft produces 70 mm of linear
travel. This determines travel resolution.
Technical Data
Product Finder Home Page
Techno Linear Motion Catalog 92
MA
CH
INE
S&
SLID
ES
2
Blueline 3Foot Mount & 90° Carriage Mount
Load 1
Load 2
F
F
L
L
200 N
100 N
1600 N
400 N
800 N
4
3.5
3
2.5
2
1.5
1
0.5
0500 1000 2000 3000
Length (mm)
Def
lect
ion
(m
m)
Deflection Chart – Blueline 3
176
160.5125
2517690
160
160
Foot MountHL4700M232399
90° Carriage MountHL4700M232300
90° Carriage Mount
Ø6.5Ø11
Ø6.5(x4)
Foot MountAssembly End View
4 3 1335.5
37.5
3
94106
149
176.5160
100
60
Ø6.5
Ø11
Ø6.5
85.5
160
255
8735.5
Optional 90 Carriage Mount shown on slide
Optional Foot Mount shown on slide
°
Product Finder Home Page
Techno Linear Motion Catalog 93
MA
CH
INE
S&
SLID
ES
2
Ltw = a – 225 mm
where:a = Distance between axesLtw = Transmission bar length
Blueline 3Belt Drive Slide
Ltw
a
Ø25
Motormount left
Motormount right
Moment of Inertia
For Coupling:JK = 6.643 • 10–5 kg • m2
For Transmission Bar:JTRS = 5.218 • 10–6 kg • m2/100 mm
100.05 A
0.05 A
0.05 AA
B10
A
0.02 A
B A3030
2 M6A – A
B – BM6
20
15
18
13
Ø40 Ø50
Ø6.6
Ø6.6
Ø25.05
Ø11
Ø12 H7
Ø11
Transmission Bar CATALOG NUMBER: HL5500M219001-1 – 1 meter long
HL5500M219001-2 – 2 meters long
Coupling forTransmission Bar CATALOG NUMBER: HL5500M218050
Coupling for Ø25 mm Transmission Bar(two are included per set)
Product Finder Home Page
Techno Linear Motion Catalog 94
MA
CH
INE
S&
SLID
ES
2
Blueline 3Belt Drive Slide
BCD: Bolt Circle Diameter
Motor Stand-Off CATALOG NUMBER: HL5500M218100
40
153
3
62M5
4 x M6 x 75
45
4.256.5 A
SECTION A
60
22.522.5
40 x 60 Coupling
BCD 98.5
BCD 54Ø45
BCD 75
Ø44
Ø108
Ø73.5
not included
CATALOG NUMBER: HL5500M1214
Ø12 Ø12Ø
176
160
100
90A
A
100160
SECTION A-A
8 x Ø6.5
Ø6.5
Carriage Plate
Ø11
Product Finder Home Page
Techno Linear Motion Catalog 95
MA
CH
INE
S&
SLID
ES
2
Blueline 3Motor Assembly Information
147.5
45
108
85 SQ.
98.5 775
M6
108
82.5
206.4
247.2
62
M6 (x4)
Ø54 B.C.
DC Servo Motor CATALOG NUMBER: HZ2600M396085293
Power ....................................................... 300WMaximum Operating Speed .................... 5000 rpmContinuous Stall Torque ......................... 165 oz • inMaximum Continuous Current .............. 6.4A
Stepper Motor CATALOG NUMBER: HL2600M396085193 (Right Mount)
HL2600M396085020 (Left Mount)
Specifications
Maximum Terminal Voltage .................... 90VPeak Stall Torque .................................... 825 oz • inMaximum Pulse Current ......................... 38AOperating Temperature ........................... 0°C to 40°C
Holding Torque (bipolar) ........................ 600 N • cmSteps Full ...................................... 1.8°
Half ...................................... 0.9°Voltage (bipolar) ...................................... 2.8V
Specifications
Resistance ............................................... 0.66Inductance ............................................... 2.5mHCurrent (bipolar) ...................................... 5.9A
Product Finder Home Page
Techno Linear Motion Catalog 96
MA
CH
INE
S&
SLID
ES
2Travel(mm)
ZF1Belt Drive Slide
� Available with a 50 N • cm, 160 N • cm stepper motor,120W servo motor or no motor
� Resolution for 50 N • cm motor is 0.15 mm/step inhalf-step mode; for 160 N • cm motor is 0.075 mm/step and 0.0075 mm/pulse with standard servomotor
� Maximum speed: 1.5 m/s
� Carriage rides on two Ø8 mm precision groundsteel shafts that are supported along the entirelength of travel to minimize deflection
� Belt is 3 mm HTD, 9 mm wide. HTD belt profile helpsreduce backlash
� Home and end reference switch repeatable to < 0.1 mm
� Lengths up to 3 meters
CodeLength(mm)
030040050060068070080100150180200250300
298 398 498 598 675 698 798 99814981798199824982998
153 253 353 453 530 553 653 85313531653185323532853
Motor Type0 50 N • cm Stepper motor1 160 N • cm Stepper motor, 2:1 Ratio2 120W Servo motor, 2:1 Ratio3 No motor4 2:1 Ratio Assembly, No Motor
(Includes Pulley for Motor)ZF1 BELT DRIVE SELECTION
HL3105MP
CATALOG NUMBER
Carriage Type0 Bearing Carriage1 Roller Carriage
FEATURES
For mating connectors and cables, see page 166. For couplings, see page 132.
Product Finder Home Page
Techno Linear Motion Catalog 97
MA
CH
INE
S&
SLID
ES
2
ZF1Belt Drive Slide
Technical Data
Roller Carriage
Bearing Carriage
Maximum Acceleration Based On Belt SpecificationZF1
242220181614
1210
8642
00 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
[kg]
[m/s2]1 g = 9.81 m/s2
• Belt type: 3 mm HTD, 9 mm wide• Mass of bearing carriage = 0.43 kg• Mass of roller carriage = 1.03 kg• Weight without motor module: 3.00 kg/1000 mm• Specific mass of belt: 0.0225 kg/m• Diameter of pulley: 19.10 mm• Pulley mass moment of inertia: 5.585 x 10–7 kg • m2
• Effective circumference: 60 mmNOTE: One revolution of motor shaft produces 60 mm
of linear travel. This determines travelresolution. When NEMA 23 frame stepper orservo motor is used, two revolutions of motorshaft produces 60 mm of linear travel.
47 27
34
34
M4 (4x)
Length L
126100
44 4415.5
50
72
8.5
6.5
2.5
6.5
10.5
Travel = Length L - 145
A
B
DETAIL A
DETAIL B
10
118
3.76.5
30
22
11
11
28
22
Ø5
Ø5
11
11
28
22
M6 (4x)
90
56.1
50 SQ.
30
2211 3.7
8
10
6.5
7.7
23.290
42.7
47
34
M4 (4x)
34LENGTH L
44
27126
TRAVEL = LENGTH L - 145
C
DETAIL C
Ø5
Ø5
ROLLER Ø31
Product Finder Home Page
Techno Linear Motion Catalog 98
MA
CH
INE
S&
SLID
ES
2
ZF1Deflection Data & Motor Options
Case 1
Case 2
F
F
L
L
50 N
200
N
100
N
50 N
200
N
4
3.5
3
2.5
2
1.5
1
0.5
0500 1000 2000 3000
Length (mm)
Def
lect
ion
(m
m)
Deflection Chart – ZF1
100
N
DC Servo Motor CATALOG NUMBER: HZ2600M05NEMA23V
Power ....................................................... 120WMaximum Operating Speed .................... 6000 rpmContinuous Stall Torque ......................... 50 oz • inMaximum Continuous Current .............. 4.2A
Specifications
Maximum Terminal Voltage .................... 60VPeak Stall Torque .................................... 350 oz • inMaximum Pulse Current ......................... 31AOperating Temperature ........................... 0°C to 40°C
2611
13
M622
46
24
130.520
66
82.5
247.2206.4
Ø5
Product Finder Home Page
Techno Linear Motion Catalog 99
MA
CH
INE
S&
SLID
ES
2
ZF1Stepper Motor Options
Ø6.35
Ø58Ø5
160 N • cm Stepper Motor CATALOG NUMBER: HL2600M05NEMA23
Holding Torque ........................................ 160 N • cmStep Size: Full ................................... 1.8°
Half ................................... 0.9°Voltage – bipolar ..................................... 1.7V
Specifications
Resistance ............................................... 1.2Inductance ............................................... 2.2mHCurrent – bipolar ..................................... 4.1A
50 N • cm Stepper Motor CATALOG NUMBER: HL2600M05NEMA17
Holding Torque ........................................ 50 N • cmStep Size: Full ................................... 1.8°
Half ................................... 0.9°Voltage – bipolar ..................................... 3.2V
Specifications
Resistance ............................................... 1.1Inductance ............................................... 1.85mHCurrent – bipolar ..................................... 1.8A
44
87
20
42 SQ.
13M6
2271
125.5
18.6
2611
13
M622
4624
130.520
66
Product Finder Home Page
Techno Linear Motion Catalog 100
MA
CH
INE
S&
SLID
ES
2
CATALOG NUMBER
Motor TypeX No motorV Servo motor, 2:1 RatioS Stepper motor, 2:1 Ratio
ZF2Belt Drive Slide
� Carriage rides on two Ø8 mm precision groundsteel shafts that are supported along the entirelength of travel to minimize deflection
� Lengths up to 3 meters
� Resolution is 0.0875 mm/step in half-step modeand 0.00875 mm/pulse with standard servo motor
� Available with either a 600 N • cm stepper motor,300W servo motor or no motor
� Maximum speed: 5 m/s
� Belt is 5 mm HTD, 25 mm wide. HTD belt profilehelps reduce backlash
� Home and end reference switch repeatable to < 0.1 mm
HL3102MP
CodeLength(mm)
Travel (mm)
070100150200250300
698 9981498199824982998
463 7631263176322632763
NOTE: All slides provided with a motor come with a 2:1 belt and pulley assembly.
ZF2 BELT DRIVE SELECTION
Carriage Type0 Bearing Carriage1 Roller Carriage
FEATURES
For mating connectors and cables, see page 166. For motor standoffs and couplings, see page 132.
Product Finder Home Page
Techno Linear Motion Catalog 101
MA
CH
INE
S&
SLID
ES
2
ZF2Belt Drive Slide
• Belt type: 5 mm HTD, 25 mm wide• Mass of Bearing Carriage = 0.940 kg• Mass of Roller Carriage = 2.03 kg• Weight without motor module: 7.9 kg/1000 mm• Specific mass of belt: 0.09 kg/m• Diameter of pulley: 22.28 mm• Pulley mass moment of inertia: 5.58 x 10-6 kg • m2
• Effective circumference: 70 mmNOTE: Two revolutions of the motor shaft produce 70 mm
of linear travel. This determines travel resolution.
No load speed(rpm)
No load torque(N • m)
50015003000
0.160.240.36
Maximum Acceleration Based On Belt SpecificationZF2
2422201816141210
86420
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38
[kg]
3.5810
6.510.5
37
6.5
10.5
61
65
100
100
100 SQ.176
50 SQ.
M6 (8x)
115 171
20
25
8
M6
44
24.5
LENGTH L
TRAVEL = LENGTH L - 235 mm
5220
41
8
A
A150
501153.5
7.7
13
50.2
A-A B
65
61
100
100
20
115 171
5220
8 41
176
LENGTH L
TRAVEL = LENGTH L - 235 mm
25M6
24.5
844
A
A
3.5810
6.510.5
37
6.5
10.5
501153.5
32.5130100
13
55.5
A-A B
Ø6.5
Ø12
Ø7.4
Technical Data
Roller Carriage
Bearing Carriage
Ø6.5
Ø12
Ø31 ROLLER
Ø7.4
1 g = 9.81 m/s2
[m/s2]
Product Finder Home Page
Techno Linear Motion Catalog 102
MA
CH
INE
S&
SLID
ES
2
ZF2Deflection Data & 90°Carriage Mount
90° Carriage Mount CATALOG NUMBER: HL4700M232200
4
10.5
6.5
3
9
13.5
12
176.513.7
160.5
6
100
160
13010025
100
A
Ø6.5
Ø6.5Ø11
Load 1
Load 2
F
F
L
L
300 N
1000 N
500 N
1000 N
300 N
500 N4
3.5
3
2.5
2
1.5
1
0.5
0500 1000 2000 3000
Def
lect
ion
(m
m)
Deflection Chart – ZF2
Length L (mm)
Product Finder Home Page
Techno Linear Motion Catalog 103
MA
CH
INE
S&
SLID
ES
2
ZF2Transmission Bar & Coupling
Ltw = a - 180 mm
where:a = Distance between axesLtw = Transmission bar length
Motormount left
Motormount right
Ltw
a
Ø25
Moment of Inertia
For Coupling:JK = 6.643 • 10–5 kg • m2
For Transmission Bar:JTRS = 5.218 • 10–6 kg • m2/100 mm
100.05 A
0.05 A
0.05 AA
B10
A
0.02 A
B A3030
2 M6A-A
B-BM6
20
15
18
13
Ø40 Ø50
Ø6.6
Ø6.6
Ø25.05
Ø11
Ø12 H7
Ø11
Coupling forTransmission Bar CATALOG NUMBER: HL5500M218050
Coupling for Ø25 mm Transmission Bar(two are included per set)
Transmission Bar CATALOG NUMBER: HL5500M219001-1 – 1 meter long
HL5500M219001-2 – 2 meters long
Product Finder Home Page
Techno Linear Motion Catalog 104
MA
CH
INE
S&
SLID
ES
2
153
3
62M5
4 x M6 x 75
45
4.256.5 A
SECTION A
60
22.522.5
40 x 60 Coupling
ZF2Motor Stand-Off and Mount Plate
BCD 98.5
BCD 54Ø45
BCD 75
Ø44
Ø108
Ø73.5
Motor Stand-Off CATALOG NUMBER: HL5500M218100
B
B
A
C C
A
564
832
4459
64
5 15.5
32
48.559
B-BSECTION
A-A
C-C
8
M6 (4x)
Motor Mount Plate CATALOG NUMBER: HL4700M232204
90° 90°
17.5 x 45°
Ø6.2 Ø6.2
Ø14
Ø40
Ø12
BCD: Bolt Circle Diameter
not included
CATALOG NUMBER: HL5500M1214
Ø12
Product Finder Home Page
Techno Linear Motion Catalog 105
MA
CH
INE
S&
SLID
ES
2
ZF2Motor Assembly Information
147.5
45
108
85 SQ.
98.5 775
M6
108
82.5
206.4
247.2
62
M6 (x4)
DC Servo Motor CATALOG NUMBER: HZ2600M396085293
Power ....................................................... 300WMaximum Operating Speed .................... 5000 rpm
Continuous Stall Torque ......................... 165 oz • inMaximum Continuous Current .............. 6.4A
Stepper Motor CATALOG NUMBER: HL2600M396085193 (Right Mount)
HL2600M396085020 (Left Mount)
Specifications
Maximum Terminal Voltage .................... 90V
Peak Stall Torque .................................... 825 oz • inMaximum Pulse Current ......................... 38AOperating Temperature ........................... 0°C to 40°C
Holding Torque (bipolar) ........................ 600 N • cmSteps Full ...................................... 1.8°
Half ...................................... 0.9°Voltage (bipolar) ...................................... 2.8V
Specifications
Resistance ............................................... 0.66Inductance ............................................... 2.5mHCurrent (bipolar) ...................................... 5.9A
Ø54 B.C.
(motor module does not include 2:1 pulley module)
(motor module does not include 2:1 pulley module)
Product Finder Home Page
Techno Linear Motion Catalog 106
MA
CH
INE
S&
SLID
ES
2
HL3106MP
ZF3Belt Drive Slide
� Carriage rides on two Ø8 mm precision groundsteel shafts that are supported along the entirelength of travel to minimize deflection
� Lengths up to 3 meters
� Resolution is 0.375 mm/step in half-step mode and0.0375 mm/pulse with standard servo motor.
� Available with either a 600 N • cm stepper motor, 300Wservo motor or no motor
� Maximum speed: 5 m/s
� Belt is 5 mm HTD, 25 mm wide. The HTD belt profilehelps reduce backlash
� Home and end reference switch repeatable to < 0.1 mm
Motor Mounting0 Right-hand side1 Left-hand side
CodeLength (mm)
Travel(mm)
070100150200250300
698 9981498199824982998
458 7581258175822582758
FEATURES
ZF3 BELT DRIVE SELECTION
CATALOG NUMBER
Carriage Type0 Bearing Carriage1 Roller Carriage
Motor TypeX No motorV Servo motorS Stepper motor
For mating connectors and cables, see page 166. For motor standoffs and couplings, see page 132.
Product Finder Home Page
Techno Linear Motion Catalog 107
MA
CH
INE
S&
SLID
ES
2
ZF3Belt Drive Slide
No load speed(rpm)
No load torque(N•m)
50015003000
0.600.700.80
Technical Data
1 g = 9.81 m/s2
10.5
6.5
9
3
130100
5088
95.5 80
2832.5
54
54
65
25
65
51
100
M6
6.5
11
73
10.5
10.5
6.5
12
120
176
80
B
A
SLIDE LENGTH L
3
TRAVEL = SLIDE LENGTH L - 235
Bearing Carriage
Roller Carriage
• Belt type: 5 mm HTD, 25 mm wide• Mass of Bearing Carriage = 0.940 kg• Mass of Roller carriage = 2.03 kg• Weight without motor module: 10.5 kg/1000 mm• Specific mass of belt: 0.09 kg/m• Diameter of pulley: 47.75 mm• Pulley mass moment of inertia: 1.796 x 10–4 kg • m2
• Effective circumference: 150 mmNOTE: One revolution of motor shaft produces 150
mm of linear travel. This determines travelresolution.
Maximum Acceleration Based On Belt SpecificationZF3
242220181614
1210
8642
00 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
[kg]
[m/s2]
90.580
28
5088
7.7
54
54
65 SLIDE LENGTH L
TRAVEL = SLIDE LENGTH L - 235
25 M6
51
100
73
6.5
10.5
6.510.5
3
11M6
100 SQ.
50 SQ.
150
176
120
80
Ø12
Ø31 ROLLER
Product Finder Home Page
Techno Linear Motion Catalog 108
MA
CH
INE
S&
SLID
ES
2
Deflection Chart – ZF3
ZF390° Carriage Mount & Motor Stand-Off
Load 1
Load 2
F
F
L
L
1600 N
800 N
1600 N
800 N
400 N
400 N
4
3.5
3
2.5
2
1.5
1
0.5
0500 1000 2000 3000
Length (mm)
Def
lect
ion
(m
m)
160
100
10.5
6.5
94 3
12
13.5
176.5
160.5
6
13.7
130
10025
100
A
Ø6.5
Ø6.5
Ø11
A
153
3
62M5
(4) M6 x 75
45
4.256.5 A
A-A
BCD 98.5
BCD 54Ø45
BCD 75
Ø44
Ø108
Ø73.5
BCD: Bolt Circle Diameter
Motor Stand-Off CATALOG NUMBER: HL5500M218100
90° Carriage Mount CATALOG NUMBER: HL4700M232600
(Does not include coupling)
Product Finder Home Page
Techno Linear Motion Catalog 109
MA
CH
INE
S&
SLID
ES
2
Ltw = a - 145 mm
where:a = Distance between axesLtw = Transmission bar length
Ltwa
Ø25
Motormount left
Motormount right
Transmission Bar CATALOG NUMBER: HL5500M219001-1 – 1 meter long
HL5500M219001-2 – 2 meters long
Coupling forTransmission Bar CATALOG NUMBER: HL5500M218050
Coupling for Ø25 mm Transmission Bar (two are included per set)
ZF3Transmission Bar & Coupling
Moment of Inertia
For Coupling:JK = 6.643 • 10–5 kg • m2
For Transmission Bar:JTRS = 5.218 • 10–6 kg • m2/100 mm
100.05 A
0.05 A
0.05 AA
B10
A
0.02 A
B A3030
2 M6A-A
B-BM6
20
15
18
13
Ø40 Ø50
Ø6.6
Ø6.6
Ø25.05
Ø11
Ø12 H7
Ø11
Product Finder Home Page
Techno Linear Motion Catalog 110
MA
CH
INE
S&
SLID
ES
2
ZF3Motor Assembly Information
147.5
45
108
85 SQ.
98.5 775
M6
108
82.5
206.4
247.2
62
M6 (x4)
DC Servo Motor CATALOG NUMBER: HZ2600M396085293
Power ....................................................... 300WMaximum Operating Speed .................... 5000 rpmContinuous Stall Torque ......................... 165 oz • inMaximum Continuous Current .............. 6.4A
Stepper Motor CATALOG NUMBER: HL2600M396085193 (Right Mount)
HL2600M396085020 (Left Mount)
Specifications
Maximum Terminal Voltage .................... 90VPeak Stall Torque .................................... 825 oz • inMaximum Pulse Current ......................... 38AOperating Temperature ........................... 0°C to 40°C
Ø54 B.C.
Holding Torque (bipolar) ........................ 600 N • cmSteps Full ...................................... 1.8°
Half ...................................... 0.9°Voltage (bipolar) ...................................... 2.8V
Specifications
Resistance ............................................... 0.66Inductance ............................................... 2.5 mHCurrent (bipolar) ...................................... 5.9A
Product Finder Home Page
Techno Linear Motion Catalog 111
MA
CH
INE
S&
SLID
ES
2
Selecting a Rotary Table
First you must determine
1) Load
2) Orientation of Loada) Table is horizontal, load is acting perpendicular to surfaceb) Table is vertical, load is acting parallel to surface
3) Maximum speed (rpm)
4) Resolution needed
5) Maximum torque required
Refer to each rotary table's data sheet to match theserequirements to the table's specifications.
a) LOAD
SIDE VIEW OF ROTARY TABLE TOP VIEW OF ROTARY TABLE
b) LOAD
Product Finder Home Page
Techno Linear Motion Catalog 112
MA
CH
INE
S&
SLID
ES
2
FEATURES
Description
Rotary Table, Stepper MotorRotary Table, Servo Motor
TailstockVertical Mounting Set
Center Set
Catalog Number
HS3600M15877RTHS3600R15877RTHS3600M15877TSHS6100M15877MSHS5600M15877
Rotary Table 1
� Special anti-backlash worm & gear set, providing100:1 reduction
� Very high load capacity
� Sealed to allow use with cutting fluids
� Includes precision inductive proximity HOMEsensor
� All models with stepper motor option feature 150oz• in stepper motor, model HL2100M473040
� All models with servo motor option feature modelH50R10-0242 with line driver optical rotaryencoder, 1000 line
� Versatile mounting surfaces
� Sturdy single piece aluminum case
� Heavy-duty chrome plated steel table top withintegral shaft
� Includes 4 tapped 1/4 - 20 x 7/16" holes for mounting
For mating connectors and cables, see page 166.
Product Finder Home Page
Techno Linear Motion Catalog 113
MA
CH
INE
S&
SLID
ES
2
PROXIMITY SENSOR WITH TABLE IN HOME POSITION
1.575 (40)
A
A
1.968 (50)
3.150 (80)
.984 (25)
.250 DIA.(6.35)
.406 DIA. MARKED A (10.3)
A
A
PILOT HOLE.5001/.5006 x 7/16 DP.
9.486 (241)
10.434 (265)
4.921 DIA.(125)
.474 (12)
.474(12)
5.118 (130)
2.559 (65)
ENGRAVED RADIAL GROOVESAT 10mm INCREMENTS
2.793 (70.54)
3.150 (80)
.984 (25)
.375(9.5)
1.456 (37)
.375 (9.5)
MOTOR COVER.150
1 2
3
INPUT CABLE WITH"HEYCO" STRAIN RELIEF
1,2 & 3 ARE MOUNTING SURFACES
1/4-20 x 7/16 DP. Tapped Hole4 @ 90° ON 3.937 DIA. (100 mm)
Rotary Table 1
NOTES ON SPECIFICATIONS: Stepper motor is model HL2100M473040 as described on page 152,operating in half step mode, with 4.5A / phase, 40V chopper driver. Servomotor is model H50R10-0242 as described on page 164, operating with6A/80V chopper amplifier and 1000 line encoder operating in quadrature.These figures will, of course, vary with different loads, amplifiers andacceleration profiles provided by the controller.
1.5 (38.1)
.75(19)
.406 (10.3)
BOTH ENDS
HANDWHEEL
C.W. REMOVE TOOL
C.C.W. ADVANCE TO WORKPIECECLAMP
KNOB.88 TRAVEL
(22.3)
#2 MORSETAPER
3.0 (76.2)
5.31 (135)
6.26 (159)
.62(15.8)
2.5 DIA(63.5)
.251 DIA. x 3/4 DP.HOLES WITH SIDESET SCREWS FORUSE WITH DOWELPINS, ETC.
2.559 ± .003(65.00 ± 0.08)
125 mm80 mm65 mm
.5001 / .5006 in .437 in
60 deg / sec 33 sec 1340 N •cm
1000 kg500 kg
6000 N•cm± 33 sec± 3.4 sec
0.005 TIR mm0.018 TIR mm
6.4 kg
72 deg / sec6.5 sec
1600 N •cm
Servo
Table DiameterTable Height
Table Center HeightCenter Hole, Diameter
Center Hole, DepthMaximum Speed
ResolutionMaximum Torque
Load Capacity, HorizontalLoad Capacity, Vertical
Clamping TorqueHoming Accuracy
RepeatabilityFlatness
ConcentricityWeight
StepperSPECIFICATIONS
Product Finder Home Page
Techno Linear Motion Catalog 114
MA
CH
INE
S&
SLID
ES
2
Rotary Table 2
0 No Magnetic Brake1 With Magnetic Brake
Belt Reduction UnitHL5600M269010
Magnetic BrakeHL5600M269002
3-Jaw ChuckHL5600M269060125
� Compact, modular design suitable for generalapplications in horizontal or vertical mount.
� Available with either 306 oz • in stepper motor or330W servo motor option
� Hardened, ground and flat milled Ø125 mm steeldisk rotary surface
� Low backlash operation
� Large load capacity
� Final output reductions available in thefollowing ratios: 1:6, 1:18, 1:54, 1:162, byconnecting 1:3 belt reduction modules in serieswith each other
� Rigid cast aluminum body for durability
� Options include Ø490 mm flat milled aluminumattachment disk, Ø200 mm T-slotted attachmentdisk, 3-jaw chuck set, magnetic brake
FEATURES
Flat Disk 19" DiameterHL5600M269051500(Same as Rotary Table RF)
HL36000M2600
CATALOG NUMBER
S Stepper MotorV Servo Motor
0 Motor Mounted Above Base1 Motor Mounted Below Base
0 1:6 Output Reduction1 1:18 Output Reduction2 1:54 Output Reduction3 1:162 Output Reduction
For mating connectors and cables, see page 166.
Product Finder Home Page
Techno Linear Motion Catalog 115
MA
CH
INE
S&
SLID
ES
2
20 kg30 kg40 kg40 kg20 kg30 kg40 kg40 kg
1:61:181:541:1621:61:181:541:162
ServoMotor
12 Nm36 Nm48 Nm48 Nm 8 Nm28 Nm48 Nm48 Nm
40 kg60 kg80 kg80 kg40 kg60 kg80 kg80 kg
40 kg 80 kg120 kg160 kg 50 kg100 kg140 kg180 kg
243 81 27 9540180 60 20
9 min 3 min 1 min20 sec3.6 min1.2 min24 sec 8 sec
Table:
Load:
StepperMotor
OutputReduction
OutputTorque
Outputrpm
Maximum Loads forMounting Orientations (brake open)
Resolution
Maximum Force Load Perpendicular to DiscMaximum Torque Load on Disc about Disc Diameter
Holding Torque of Magnetic Brake
5000 N (1125 lb) Brake Closed160 Nm (120 lb• ft) Brake Closed55 Nm (40 lb• ft)
Operating Temperature Range 0°C to +70°C
Setup Assembly Any Position
Limit Switch Reed Sensor
BodyTracks
Roll Barrel
Aluminum CastingHardened and Ground Tool SteelRoller Bearing Steel
MATERIAL
Runout of Face PlateConcentricity of Face Plate
Concentricity of the Center Shaft
≤ 0.02 mm≤ 0.02 mm≤ 0.02 mm
POSITIONING ACCURACY
SPECIFICATIONS
Horizontal
Vertical
Vertical
HorizontalVertical
Vertical
Rotary Table 2
Ø8.4
10
45
SERVOMOTOR 330 W
114110
100
162
7.2
29
12
93.5
ASSEMBLY OF THE TRANSMISSION UNITS WITHMOTOR UNIT UPWARDS OR DOWNWARDS IS POSSIBLE.
HEIGHT DIFFERENCE PER GEAR STEP 45 mm.
isel200180
150
2575
200
150
25100
175312
STEPPERMOTOR
300 oz • in
Ø8.4Ø110
3 x 120°
45°
4 x 90°
Ø9
Ø23
M8
Product Finder Home Page
Techno Linear Motion Catalog 116
MA
CH
INE
S&
SLID
ES
2
Rotary Table RF
FEATURES
����� Compact design suitable for general applications in horizontal or vertical mount
����� Available with either 202 oz• in stepper motor or 120W servo motor
����� Hardened, ground & flat milled Ø125 mm steel rotary surface
����� Low backlash operation
����� Large load capacity
����� Ø23 mm hole through middle of rotary table
����� Rigid cast aluminum body for durability
����� Options include:
– Magnetic brake– 3-jaw chuck– Ø490 mm aluminum utility disk
CATALOG NUMBERHL360 00M263
Motor DriveS Stepper MotorV Servo Motor
Brake0 No Brake1 24V DC Brake
Output Reduction0 1: 241 1: 522 1: 100
For mating connectors and cables, see page 166.
3-Jaw ChuckHL5600M269060125
490 mm DiameterAluminum Flat DiskHL5600M269051500
Product Finder Home Page
Techno Linear Motion Catalog 117
MA
CH
INE
S&
SLID
ES
2
MATERIAL
Rotary Table RF
POSITIONING ACCURACY
SPECIFICATIONS
Runout of Face PlateConcentricity of Face Plate
Concentricity of the Center Shaft
≤ 0.02 mm≤ 0.02 mm≤ 0.02 mm
BodyTracks
Roll BarrelSetup Assembly
Limit SwitchOperating Temperature Range
Max. Force Load Perpendicular to DiscMax. Torque Load on Disc about Disc Diameter
Holding Torque of Magnetic Brake
Aluminum CastingHardened and Ground Tool Steel
Roller Bearing SteelAny PostionReed Sensor0°C to +70°C
5000 N (1125 lb) Brake Closed160 Nm (120 lb• ft) Brake Closed
55 Nm (40 lb• ft)
VerticalVertical
Motor Drive
StepperMotor
ServoMotor
OutputReduction
Resolutionsec
OutputTorqueN •m
Outputrpm
Max. Loads for Mounting Orientations(brake open) kg
Table:Load:
HorizontalVertical
VerticalHorizontal
1:24
1:52
1:100
1:24
1:52
1:100
135
62.3
32.4
54
24.9
12.9
17.5
38
75
45
98
188
50
23
12
125
57
30
80
120
150
100
140
170
30
40
40
30
40
40
60
80
80
60
80
80
45
4 X 90
401
102
275
(122) 200(110) 188
8
A A 2
3 X 120
300
0 50 101.5 200 350 400
204
250
275
7 X M8
Ø135Ø125
Through Hole Ø23Bolt Circle Ø110
°
°
°
Ø100 0-0.02
NOTE:Dimensions in parenthesesare for Stepper Motor Unit.
Product Finder Home Page
Techno Linear Motion Catalog 118
MA
CH
INE
S&
SLID
ES
2
FEATURES
����� Special anti-backlash worm & gear set, providing50:1 reduction
����� Moderate load capacity (up to 50 lbs vertical load)
����� Sealed against dust and contaminants
����� Includes precision inductive proximity HOMEsensor
����� All models with stepper motor option feature 125oz • in stepper motor, model HL2100M473030
����� All models with servo motor option feature modelH50R10-0242 with 1000 line driver optical rotaryencoder.
����� Versatile mounting surfaces
����� Sturdy single piece aluminum case
����� Heavy-duty chrome plated steel table top withintegral shaft
����� Includes 4 tapped 1/4-20 x 3/8” holes for mounting
Rotary Table 5
HS3600M15890STHS3600M15890SV
CATALOG NUMBER
StepperServo
For mating connectors and cables, see page 166.
Product Finder Home Page
Techno Linear Motion Catalog 119
MA
CH
INE
S&
SLID
ES
2
90 deg / sec .009°
50 lb• in50 lb / in
23 kg (50 lbs)50 lb• in
.038°
.038°.001" TIR.0015" TIR
4 kg (8.8 lbs)
135 deg / sec.0018°
Table DiameterTable Height
Table Center HeightCenter Hole, Diameter
Center Hole, DepthMaximum Speed
ResolutionMaximum Torque
Load Capacity, HorizontalLoad Capacity, Vertical
Clamping TorqueHoming Accuracy
RepeatabilityFlatness
ConcentricityWeight
185 150
100
17.5
125
100
188
131
68.3
68.3
10012.5
8112.7
45
10.5 M6 x 14 DP (4 PLACES)
PILOT HOLE .376" DIA. 3/4" DEEP.375"
Ø.265" THRU HOLE 4 PLACES
1/4" - 20 x 3/8" DPTAPPED HOLES
4@90° ON AØ100 mm B.C.
Ø150
Rotary Table 5
NOTES ON SPECIFICATIONS: Stepper motor is model HL2100M473040 asdescribed on page 152, operating in halfstep mode, with 4.5A / phase, 40V chopperdriver. Servomotor is model H50R10-0242as described on page 164, operating with6A/80V chopper amplifier and 1000-lineencoder operating in quadrature. Thesefigures will, of course, vary with differentloads, amplifiers and acceleration profilesprovided by the controller.
4.5 kg (9.9 lbs)
ServoStepperSPECIFICATIONS
150 mm81 mm
100 mmØ.375 in.
.75 in.
Ø
Product Finder Home Page
Techno Linear Motion Catalog 120
MA
CH
INE
S&
SLID
ES
2
XYZ Configurations
There are several options available when an XYZ configuration is required. Heavy-Duty 2 Slides are recommendedfor such applications due to the higher load bearing capabilities realized in their single-piece solid steel bearings. Fourdifferent configurations are provided here, but they are not intended to be an exhaustive representation of thepossibilities. In addition to these, the Gantry III, DaVinci, or Bridge Mounted slide may suitably serve the application.To configure an XYZ system as shown below, the components must be bought as outlined.
Techno would be pleased to quote on preassembled systems
XYZ1: consists of 3 Heavy-Duty 2 slides (page 76), 1XY Mounting Plate 3 (page 127), and 1 Series 4 rightangle mounting plate (page 122).
XYZ3: consists of 3 Heavy-Duty 2 slides (page 76), 1Series 3 right angle mounting plate (page 122), 1 XYmounting plate 3 (page 127).
XYZ2: consists of 3 Heavy-Duty 2 slides (page76), 1 Series 3 right angle mounting plate (page122), 1 XY mounting plate 3 (page 127).
Product Finder Home Page
Techno Linear Motion Catalog 121
MA
CH
INE
S&
SLID
ES
2
Accessories
MOUNTING HARDWARERight Angle Mounting Plates ....... page 122Bearing Plates 1 & 2 for Narrow Profile Slide 2 ....... page 124Bearing Plates 3 & 4 for Heavy-Duty Slide 2 ........... page 125XY Mounting Plate 1 for Standard-Duty Slide .......... page 126XY Mounting Plate 3 for Heavy-Duty Slide 2 ........... page 127
SPINDLESVariable High-Speed Spindle ...... page 128Low-Speed Drilling Head ............ page 129Low-Speed Milling Head ............. page 129
COUPLINGSMachine Stands .......................... page 130Work Holding Components ......... page 131Couplings & Motor Standoffs ...... page 132Inertial Dampers .......................... page 133Cable Carriers ............................. page 133
Product Finder Home Page
Techno Linear Motion Catalog 122
MA
CH
INE
S&
SLID
ES
2
Right Angle Mounting Plates
FEATURES�����Die-cast aluminum
�����Mounting surfaces milled flat to 0.05 mm.
�����Perpendicular machined surfaces are accurate to 0.1 mm.
�����Unmachined surfaces have black or silver powder-coated finish.
�����All through holes and slots are designed for M6 screws.
�����Mounting through holes are on a 25 mm grid.
�����Wall thicknesses range from 12 to 15 mmto resist large forces and vibrations.
�����Weights: HL6100M209110002 – 1.8 kgHL6100M209110003 – 3.8 kgHL6100M209110004 – 22.8 kg
�����Suitable for machine components, machiningmounting block, universal angular mount.
�����Aluminum alloy plates feature high thermalconductivity and corrosion resistance.
�����45° mounting slots on Series 3 offeradditional mounting flexibility.
SERIES 2black, 446 x 221 x 75 mm
HL6100M209110002
SERIES 3black, 446 x 221 x 221 mm
HL6100M209110003
SERIES 4black, 700 x 425 x 300 mm
HL6100M209110004
Catalog Numbers
XYZ Positioning SystemThis system uses two standard-duty slides.A right angle bracket supports the Z-axis.
XYZ Positioning System with Bridge Mounted Y-AxisThis system uses four standard-duty slidesand two right angle brackets.
Product Finder Home Page
Techno Linear Motion Catalog 123
MA
CH
INE
S&
SLID
ES
2
Right Angle Mounting Plates
SERIES 2
SERIES 3
SERIES 4
R10
446
37.5
25
25
221
R10
12
R100
446
22112
R100
12
50
12.5
37.5
25
7550
12
112.5
37.5 22137.5 25 150
25
50
6.5175
112.5337.5
300
175
1637.5
87.5137.5187.5
225
200 225
12.5175
700
25
500
143
205
325
15
425
200 80
25
45
45
20°
°
90°
20°
NOTE:ALL HOLES Ø6.5 mm
NOTE:ALL HOLES Ø6.5 mm
°
Product Finder Home Page
Techno Linear Motion Catalog 124
MA
CH
INE
S&
SLID
ES
2
Bearing Plates 1 & 2For Narrow Profile Slide 2
FEATURES
����� Constructed from dark finished,polished steel plate 8 mm thick
����� Bearing Plate 1 can be used as a heavy-duty steel replacement
bearing plate on Narrow ProfileSlide 2 system
����� Bearing Plate 2 can be used asan extended heavy-duty steelreplacement bearing plate onNarrow Profile Slide 2 systems
for special applications
����� Both Bearing Plate 1 and BearingPlate 2 can be used in originaldesigns involving Techno BearingCarriage 4 with either Series 2,Series 200, Series 400 or Series500 Double Linear Rail Systems
����� Each supplied with pretappedM6 mounting holes and ø6 (H7)dowel pin holes, as shown
CATALOG NUMBERBearing Plate 1 HL4700M277001Bearing Plate 2 HL4700M277002
5
0.8
BEARING PLATE 1SECTION A-A
8 -0.05
0.05 0.8GROUND
0.8GROUND
A
50 ±0.01
25
M6 M6
100
50
50
A
125
A
70
BEARING PLATE 2
SECTION A-AGROUND
0.8 GROUND
0.1 0.05
A
A 5 8 -0.05
2525 25 25
M6 M6
50 70
A
255130
56131
231
M6
A
0.05 A
Ø6.6 Ø11
Ø6H7
Ø6H7 Ø6H7 Ø6.6 Ø11
Product Finder Home Page
Techno Linear Motion Catalog 125
MA
CH
INE
S&
SLID
ES
2
Bearing Plates 3 & 4For Heavy-Duty Slide 2
HL4700M277003
HL4700M277004
FEATURES
����� Constructed from dark finished, polished steelplate 8 mm thick
����� Bearing Plate 3 can be used as a heavy-dutysteel replacement bearing plate on Heavy-DutySlide 2 System and Double Slide System
����� Bearing Plate 4 can be used as an extendedheavy-duty steel replacement bearing plate onHeavy-Duty Slide 2 systems for specialapplications with four bearing blocks
����� Bearing Plates 3 & 4 can be used in originaldesigns involving Techno Bearing Carriage 4with either Series 2, Series 200, Series 400 orSeries 500 Double Linear Rail Systems
����� Each supplied with pretapped M6 mounting holesand Ø6H7 dowel pin holes, as shown
CATALOG NUMBERS
Bearing Plate 3
Bearing Plate 4
BEARING PLATE 3
BEARING PLATE 4
Ø6H7
X
X0.05
SECTION X-X
0.1
GR
OU
ND
0.8
58 -0.05
0.8GROUND220
255
X130
50
25
200
231
18 X M6131
56X
50
1099
25
209
100
0.850 100
X220
200150
125
M6
M6
25
SECTION X-X
0.05 XX
0.1GROUND
0.8
GR
OU
ND
5 8 -0.05
X
Ø6H7Ø6H7
Ø6H7
Ø6.6150 ±0.01
100 ±0.01
Ø11
Ø6H7
240 ± 0.01
Ø11
Ø6.6 150 ± 0.01
Ø6H7
Product Finder Home Page
Techno Linear Motion Catalog 126
MA
CH
INE
S&
SLID
ES
2
XY MOUNTING PLATE 1
87.5 97
184.5
STANDARD-DUTY
Two Standard-Duty Slides (page 74) can be mounted together to provide XY positioning tables.
Two Configurations:
�����bearing plate of bottom slide to the bearing plate of the top slideor
�����bearing plate of bottom slide to base of the top slide
XY Adapter Plate for Standard-Duty Slides.Provided with 16 pieces of M6 x 12 socket headcap screws and eight M6 square nuts.
FEATURES
Bearing plate to bearing plate mounting shown
10
10
50 TYP
35
220
35 50 TYP220
Ø6.35Ø12 C'BORE 5 DP(16 PLACES)
Catalog Number Part Description
HS4700MXY-1 XY Mounting Plate 1
XY Mounting Plate 1For Standard-Duty Slides
Product Finder Home Page
Techno Linear Motion Catalog 127
MA
CH
INE
S&
SLID
ES
2
25
255
130
50
0.8
0.8
A 0.1
0.05 A
85 -0.05
SECTION A–A
A
5
85
-0.05
0.8
0.8
0.1
0.05 A
SECTION A–A
A
220
231
5025
A
13156
A
200100
25
9109
209
18 x M6
255A
75
170
792
CONNECTORPLUGS
225
200130220
792
50
XY Mounting Plate 3For Heavy-Duty Slide 2
Two Heavy-Duty 2 Slides(page 76) can be mountedtogether to provide XYpositioning tables. The XYMounting Plate 3 set is usedin place of the two bearingplates to mount the twooperating sides of the slidestogether. The set consists oftwo pieces, and is made offlat milled steel, 8 mm thick.Each slide must have a totalof 4 bearing blocks, two perrail set. The plates aresupplied with all mountinghardware including dowel pinsto assure perpendicularmounting.
XY Mounting Plate 3
Catalog Number
HS4700MXY-3
Part Description
Ø11
Ø6H7
Ø11
Ø6.6
Ø6H7
Ø6.6
240 ±0.01
150±0.01
240 ±0.01
150 ±0.01
150±0.01
Product Finder Home Page
Techno Linear Motion Catalog 128
MA
CH
INE
S&
SLID
ES
2
Variable High-Speed Spindle
FEATURES
����� 900 Watt power
����� 8000-24000 rpm
����� 110V (220V optional)
����� Set includes mounting bracket, 1/8"1/4" and 6 mm collets and wrenches.
����� Ideal for drilling and milling woods and plastics
����� Ready to mount on most Techno-Isel gantriesand slides
����� Two sets of mounting holes on bracket. 100 mmon center and 150 mm on center
H24K50M6990ST
H24K00M6990
H24K52M6990ST
H24K02M6990
H25K00-1178
H25K00-1174
HL5400M172010
H25K00-14372
H25K00-12437
H25K00-21208
Catalog Number Description
900 Watt, VariableHigh-Speed Spindle Set
900 Watt, VariableHigh-Speed Spindle Only
900 Watt, VariableHigh-Speed Spindle Set (220V)
900 Watt, VariableHigh-Speed Spindle Only
1/8" Collet
1/4" Collet
Mounting Bracket
14 mm Open-End Wrench
18 mm Open-End Wrench
Collet Nut
Product Finder Home Page
Techno Linear Motion Catalog 129
MA
CH
INE
S&
SLID
ES
2
Variable Speed Drill Head
Low Speed Milling Head
FEATURES
����� 800 - 2500 rpm
����� 900 Watt
����� 120 V AC Operation
����� 3/8" Drill Chuck
����� Includes Mounting Bracket
H24S50M21151
H24S52M21151
Catalog Number
120V
220V
FEATURES
����� 800 - 2500 rpm
����� 900 Watt
����� Accepts Industry Standard ER16 Collets
����� Includes Mounting Bracket
Spindle without Collets:120V Milling Spindle Only, H24S00M23110220V Milling Spindle Only, H24S02M23110Spindle with Collets:120V Milling Spindle Set, H24S50M23110220V Milling Spindle Set, H24S52M23110
Spindle with Collets include the following sizes: Collet Set:
H24X10-ER1618H24X10-ER1614H24X10-ER1638
Catalog Number
1/8"
1/4"
3/8"H24X10-ER16SET
Catalog Number
Includes 10ER16 Collets
from 1/32"up to 2/8"
Machining Head Options
Product Finder Home Page
Techno Linear Motion Catalog 130
MA
CH
INE
S&
SLID
ES
2
HX3500-015EHX3500-027EHX3500-040EHX3500-054EHX3500-067EHX3500-130E
Machine Stands
323232323232
24-3/434-1/8
4453-3/453-3/4
70
36-1/446-1/1646-1/1646-1/1650-3/1660-1/32
015027040054067130
Catalog NumberGantryModel W L H
FEATURES
����� Welded steel machine base with powder-coated finish for durability����� Leveling feet to assure horizontal
table top����� 3" x 2" heavy steel tubing construction for rigidity
Width, W
Height, H
Length, L
NOTE: E-stop panel supplied when purchased with Techno-ISEL electronics only.
Product Finder Home Page
Techno Linear Motion Catalog 131
MA
CH
INE
S&
SLID
ES
2
Work Holding Components
ADJUSTABLE TOGGLE CLAMP, made of steel, is ideal for holdingodd shaped parts. The front screw can be positioned along the slot whilethe rear screw adjusts the pressure on the part. Both M6 screws and anM6 T-slot nut are included with the clamp.
HEAVY-DUTY CAM LOCK CLAMP, made of black oxidized hardenedsteel. This clamp will provide up to 2500 N of clamping force with 100 Nof actuating force. A 180 degree rotation of the locking arm will providea clamp stroke of 4 mm. 15 mm high, 32 mm wide, 107 mm overall length.Provided with two-hole nut strip and screws to allow mounting to a T-slot.
CLAMP BARS, made of plated steel, 10 mm high and 20 mm wide inlengths to 250 mm. To be used with either the cam lock clamps or thepneumatic clamps to make a work holder. Provided with screws and nutsto allow mounting to a T-slot.
PNEUMATIC CLAMP, made of hardened steel with a blackoxide finish, provided with screws and nuts for mounting to theT-slots and a fitting for 6 mm OD, 4 mm ID plastic pressure tube.
MANUAL VISES are made of steel with side slots for flexible mounting.The moveable jaws have side guides and the stationary jaws have bothhorizontal and vertical V slots for holding round objects. Both jaws havesupport surfaces for holding flat objects.
HL5400M290051Catalog Number
HL5400M290002
Catalog Number
Length(mm)Catalog Number
HL5400M290020075HL5400M290020125HL5400M290020175HL5400M290021225
75125175225
Catalog NumberMaximum
Stroke
ClampingForce
(N at 6 bar)
Dimensionsat min. length
(mm)
HL5400M290010 10 50 20H x 65W x 75L
Catalog Number MaximumStroke
HL5400M290055HL5400M290056
152H x 130W x 45L215H x 175W x 75L
6595
OverallDimensions
(mm)
Product Finder Home Page
Techno Linear Motion Catalog 132
MA
CH
INE
S&
SLID
ES
2
Accessories
MOTOR STANDOFFS
COUPLINGS
For Use With:Heavy-Duty Slide 2 Page 76Narrow Profile Slide 2 Page 80Narrow Profile Belt Drive Slide 1 Page 82Blueline 1 Belt Drive Slide Page 84
Requires (4) M5 x 70mm Socket Head Screws - HX6100M05070
NEMA 23 Frame
HL4700M681699-60
NEMA 23 Frame
HX4700MNEMA23-14
For Use With:Gantry III Page 64Z-Axis Slides Page 66Bridge Mounted Slide Page 72Standard-Duty Slide Page 74Narrow Profile Slide 1 Page 78(Includes Circuit Board and Home Switch)
NEMA 34 Frame
HL5500M218100
For Use With:Blueline 3 Belt Drive Slide Page 90ZF2 Belt Drive Slide Page 100ZF3 Belt Drive Slide Page 106
Catalog Number Boremm
HL5500M6380HL5500M3473HL5500M80127HL5500M1214HL5500M1212
8 - 6.35
6.35
8 - 12.7
12
12 - 12.7
O.D.mm
30
20
20
40
40
Lengthmm
40
30
30
60
60
MaximumParallel Offset
mm
0.15
0.20
0.13
0.1
0.1
MaximumTorque
N • m
7.5
3
3
10
10
Shaft Coupling, jaw type with clamp hub, 1° Max. angular offset
(Please make notethis catalog numberis for one bolt)
Product Finder Home Page
Techno Linear Motion Catalog 133
MA
CH
INE
S&
SLID
ES
2
Accessories
Inertial Dampers
The Techno Inertial Damper has beendesigned to provide smoother operation andstop loss of steps which may occur whenstepper motors operate at resonancefrequencies.
Catalog Number Machines
H90Z12-17967H90Z12-65A2902B
All except DaVinci
DaVinci only
Catalog Number Cable Carrier Kits
HX3500-CCKIT1HX3500-CCKIT2HX3500-CCKIT3HX3500-E164060HX3500-117412PZ
Cable Carrier Kit (Model 130)
Cable Carrier Kit (Models 027, 040, 054 and 067)
Cable Carrier Kit (Model 015)
Cable Carrier, 1 Foot Length
Cable Carrier End Brackets (Set of Two)
All kits include mounting brackets and flexible track.
Cable Carriers2.46
(62.5)
1.89(48)
1.26 (32)
1.54 (39)
NOTE: 0.79" is maximum diameter of a single cable which can be used in this system.
Product Finder Home Page
Techno Linear Motion Catalog 134
MA
CH
INE
S&
SLID
ES
2
SEE OUR NEW COMPONENTSCATALOG H860
Linear Rails and Bearings
For all types of automation applications.Stock lengths of rails to 3 m, carriagesrated up to 10 m/s and loads to 2700 kg.
Ball and Cross Roller Slides
Loads from 1.5 lbs to 2032 lbs. Travellengths from 0.5 inches to 12 inches.High accuracy, low friction and lightweight.
Ball and Acme Screws
Inch and metric sizes in stock. Screw diametersfrom 1/4" to 1 1/2" and 10 mm to 25 mm withlengths to 3 meters. Nuts with threadedor flanged ends as well as anti-backlash models.
Aluminum Extrusions and Table Plates
For a variety of automation applications. Stocklengths to 3 meters and table plates up to 375 mmwide. A complete line of accessories and hardwareto complete any project.
Product Finder Home Page