Embed Size (px)
Citation preview
74 METTLER TOLEDO US and Canada
www.mt.com / m800
Tran
smitt
er M800 Multi-Parameter, Multi-Channel Transmitter (4-wire)Intuitive, Intelligent, Flexible
The M800 transmitter series features premium Intelligent Sensor Management (ISM) technology measuring Conductivity, TOC, pH / ORP, optical DO, dissolved oxygen, dis-solved ozone. The multi-parameter transmitter accepts any compatible combination of ISM sensors. Up to 4 channels of process measurement plus 2 flow measurements provides immediate Plug and Measure installation and operation, predictive sensor maintenance and dynamic lifetime status. The color touchscreen ensures intuitive operation, with user selectable control and alarm management.
SpecificationsPerformanceMeasurement parameters Conductivity, TOC, pH / ORP, dissolved oxygen, ozone and temperatureISM Advanded Diagnostic (Dynamic Lifetime Indicator, Adaptive Calibration Timer, CIP / SIP counter etc.) iMonitorConducitvityConductivity ranges 2-electrode sensor : (C = cell constant) C = 0.1: 0.01 to 50,000 µS / cm (20 Ω × cm to 50 mΩ × cm) C = 0.1 sanitary: 0.01 to 2,000 µS / cm (500 Ω × cm to 50 mΩ × cm) C = 0.01: 0.001 to 500 µS / cm (2,000 Ω × cm to 500 mΩ × cm) 4-electrode sensor: 0.01 to 650 mS /cm (1.54 Ω × cm to 0.1 MΩ × cm)Temperature measuring range – 40 to 200 °C (– 40 to 392 °F)Temperature compensation Auto / selectable as: Std. (standard high purity water Thornton / Light), Light 84, Std. pure water referenced to 75 °C, linear % / °C (adjustable), 50 % glycol, 100 % glycol, cation, ammonia, isopropyl alcohol, noneTOCMeasurement range 0.05 –2000 ppbC (µgC/L)Accuracy ± 0.1ppb C for TOC < 2.0 ppb (for water quality > 15 mΩ × cm [0.067 µS/cm]) ± 0.2 ppb C for TOC > 2.0 ppb and < 10.0 ppb (for water quality > 15 mΩ × cm) ± 5 % of measurement for TOC > 10.0 ppb (for water quality 0.5 to 18.2 mΩ cm)pHpH range – 1 to 15ORP input range – 1500 to 1500 mVpH resolution Auto / 0.001/ 0.01/ 0.1/ 1 (can be selected)Temperature measuring range – 30 to 150 °C (– 22 to 302 °F)Temperature compensation Auto / manual / STCOxygenOxygen range (amperometric) Dissolved Oxygen: Saturation 0 to 500 % air, 0 to 200 % O2,
Concentration 0.1 ppb (µg / L) to 50.00 ppm (mg / L) Oxygen resolution Auto / 0.001/ 0.01/ 0.1/ 1 (can be selected)Temperature measuring range – 30 to 150 °C (– 22 to 302 °F)Temperature compensation AutoOzoneOperating range 0 – 5,000 ppb (mg / l); 0 – 5.0 ppm (mg / l) short term; 0 – 500 ppb (mg / l); 0 – 0.5 ppm (mg / l) continuousSystem accuracy ± 0.4 ppb or 4 % of reading, whichever is greater; ± 0.5 °C
Other Highlights– 8 current outputs– 8 output relays– Traffic light coded sensor status– IP 66 rated– 2 PID process controller– IP 66 rated, cUL pending Type 4X
Features Overview– Color touchscreen– Intuitive operation– Premium ISM functionality – Multi-parameter measurement– 2-channel / 4-channel versions– iMonitor– User management and logbook
TransmittersOutstanding Performance, Advanced Electronics
75METTLER TOLEDO US and Canada
125 mm/4.92"
170 mm/6.69"
45 mm/1.77"
5
.39"
(+ 0
.02"
)
(– 0
")
137
mm
(+ 0
.5 m
m)
(–
0 m
m)
5.39" (+ 0.02")
(– 0")
137 mm (+ 0.5 mm)
(– 0 mm)
150 mm/5.90"
158
mm
/6.2
2"
MET
TLER
TOL
EDO
M800
40 mm/
66 mm/tt"
1.58"
2.28
"58
mm1.
38"
35 m
m0.
98"
25 m
m
Cut-out dimensions of M800 Side dimensions of M800
Front dimensions of M800
Microelectr.
Power
Pharma Water
Wastewater
Ordering InformationTransmitters Order Number M800 Water 2-channel + 2 flow 58 000 802 M800 Water 4-channel + 2 flow 58 000 804Installation Accessories Pipe mount kit 52 500 212 Panel mount kit 52 500 213Protective hood 52 500 214
General SpecificationsPower supply 100 to 240 V AC, or 20 to 30 V DC, 12 VAAC frequency 50 to 60 HzCurrent (analog) outputs 8 × 0 / 4 to 20 mA, 22 mA alarm User interface Color touchscreen 5.7", Resolution 320 × 240 px, 256 colorsLanguages 10 (English, German, French, Italian, Spanish, Portuguese, Russian, Japanese, Korean and Chinese)Ambient temperature – 10 to 50 °C (14 to 122 °F)Relative humidity 0 to 95 %, non-condensingRating IP 66 (when back cover is attached), UL Type 4X *PID process controller 2Hold input YesControl input YesAlarm contact Yes (alarm delay 0 to 999 s)Relays Mechanical rated at 250 VAC, 3 Amps (Relay 1 NC, Relay 2 to 4 NO); 4-SPDT Type Reed 250 VAC or DC, 0.5 Amps (Relay 5 to 8)Setpoints High, low, between, outside, USP, EP* Pending
ISM Sensor Cables 2-e Conductivity Order Number pH / DO / O3 / 4-e Cond Order Number 0.3 m (1 ft) 58 080 270 1.0 m (3 ft) 59 902 167 1.5 m (5 ft) 58 080 271 3.0 m (10 ft) 59 902 193 3.0 m (10 ft) 58 080 272 5.0 m (16 ft) 59 902 213 4.5 m (15 ft) 58 080 273 10.0 m (33 ft) 59 902 230 7.6 m (25 ft) 58 080 274 15.2 m (50 ft) 58 080 275 30.5 m (100 ft) 58 080 276 45.7 m (150 ft) 58 080 277 61.0 m (200 ft) 58 080 278 91.4 m (300 ft) 58 080 279
125 mm/4.92"
170 mm/6.69"
45 mm/1.77"
5
.39"
(+ 0
.02"
)
(– 0
")
137
mm
(+ 0
.5 m
m)
(–
0 m
m)
5.39" (+ 0.02")
(– 0")
137 mm (+ 0.5 mm)
(– 0 mm)
150 mm/5.90"
158
mm
/6.2
2"
MET
TLER
TOL
EDO
M800
40 mm/
66 mm/tt"
1.58"
2.28
"58
mm1.
38"
35 m
m0.
98"
25 m
m
125 mm/4.92"
170 mm/6.69"
45 mm/1.77"
5
.39"
(+ 0
.02"
)
(– 0
")
137
mm
(+ 0
.5 m
m)
(–
0 m
m)
5.39" (+ 0.02")
(– 0")
137 mm (+ 0.5 mm)
(– 0 mm)
150 mm/5.90"15
8 m
m/6
.22"
MET
TLER
TOL
EDO
M800
40 mm/
66 mm/tt"
1.58"
2.28
"58
mm1.
38"
35 m
m0.
98"
25 m
m
125 mm/4.92"
170 mm/6.69"
45 mm/1.77"
5
.39"
(+ 0
.02"
)
(– 0
")
137
mm
(+ 0
.5 m
m)
(–
0 m
m)
5.39" (+ 0.02")
(– 0")
137 mm (+ 0.5 mm)
(– 0 mm)
150 mm/5.90"
158
mm
/6.2
2"
MET
TLER
TOL
EDO
M800
40 mm/
66 mm/tt"
1.58"
2.28
"58
mm1.
38"
35 m
m0.
98"
25 m
m
M800 Multi-Parameter, Multi-Channel Transmitter (4-wire)Intuitive, Intelligent, Flexible
76 METTLER TOLEDO US and Canada
www.mt.com / Thornton-M300
Tran
smitt
ers
TransmittersOutstanding Performance, Advanced Electronics
M300 & M300 ISM TransmitterReliable, Versatile, Easy to Use
The METTLER TOLEDO Thornton M300 transmitter line for conductivity / resistivity, pH/ORP, dissolved oxygen, ozone and flow rate combines robustness with ease of use. Its versatility and solid measurement performance makes it the ideal choice for light industrial applications. The M300 transmitters are designed for comforta-ble operation: from the large display to the easily accessible wiring terminals to the plain text interface and quick setup menu. With its innovative USB port, the M300 is open to the future – for remote configuration and commissioning. M300 ISM ver-sions provide the beneficial Plug and Measure feature thanks to ISM functionality.
Specifications Enclosure / PowerOperator interface 4 line backlit LCD; 5 tactile keysMaterial PolycarbonateWeight, 1⁄4 DIN models 0.7 kg (1.5 lb)Weight, 1⁄2 DIN models 1 kg (2 lb)UL electrical environment Installation (overvoltage) Category IIRatings / approvals UL (US & Canada), CE compliant; 1⁄4 DIN: IP 65 (front); 1⁄2 DIN: IP 65 / NEMA 4XEMC emissions According to EN55011 Class APower Universal 100 – 240 VAC, 50 – 60 Hz or 20 – 30 VDC; 5 W Outputs Analog outputs (as specified Powered 0 / 4 – 20 mA, 22 mA alarm, 500 Ω maximum load; for individual models) not for use with externally powered circuitsAnalog output accuracy ± 0.05 mAAnalog output scaling Linear, bi-linear, logarithmic (1,2,3 or 4 decades), auto-rangingRelays (as specified All contacts are potential free, with adjustable hysteresis and for individual models) time delay SPDT, SPST NO, SPST NC: 250 VAC / 30 VDC, 3 A, resistive SPST reed: 300 VDC, 0.5 A, 10 WService interface USB, type B connector, for remote configuration and commissioningDiscrete input (as specified Accepts dry contact closure for remote flow totalizer reset or for individual models) remote PID control auto/manual selection
Features Overview– Conductivity versions available in single and dual-channel configurations– PID controller with pulse length, pulse frequency or analog control– Multi-level password protection against accidental parameter changes
Other Highlights– M300 for ISM: Plug and Measure functionality– 4-wire installation– Quick setup mode for fast installation– Backlit high contrast display– Basic diagnostics
– Multi-parameter version provides two user-configurable channels for con- ductivity/resistivity, pH, oxygen or ozone– SW tools for configuration and commissioning using the USB port
77METTLER TOLEDO US and Canada
Microelectr.
Power
Pharma Water
Wastewater
Measurement SpecificationsConductivity / Resistivity Ranges 0.01 constant sensor: 0.002 to 200 µS / cm (5000 Ω × cm to 500 mΩ × cm) 0.1 constant sensor: 0.02 to 2000 µS / cm (500 Ω × cm to 50 mΩ × cm) 10 constant sensor: 50 to 40,000 µS / cm (25 to 20 KΩ × cm) 4-electrode sensor: 0.01 mS /cm to 650 mS / cm (1.54 Ω × cm to 100 KΩ × cm)Accuracy ± 0.5 % of reading or 0.5 Ω, whichever is greater, up to 18 mΩ-cm Concentration ranges of HCl, NaOH, H2SO4 0 – 20 %, 0 – 15 %, 0 – 20 %TDS ranges (CaCO3 and NaCl) Cover equivalent conductivity rangesCalculated parameters (2-channel) % Rejection, power plant calculations of pH based on specific and cation conductivity, and
C02 based on cation and degassed conductivityTemperature compensation Selectable as: Std (standard high purity Thornton / Light), Light 84, Std referenced to 75 °C, linear % / °C, 50 % glycol, 100 % glycol, cation, ammonia, isopropyl alcohol, nonepHpH, ORP ranges –1.00 to 15.00 pH, –1500 to 1500 mVTemperature range – 30 to + 130 °C (–22 to 266 °F)Accuracy ± 0.03 pH, ± 2 mVTemperature compensation Automatic / manual for electrode output, plus adjustable solution temperature coefficient for solution ionization effects Calibration 1– or 2 – point, with auto buffer recognitionDiagnostics Selectable continuous checking of membrane resistance and reference diaphragm / junction resistance (with solution ground sensors)Dissolved Oxygen Ranges 0 – 20,000 ppb; 0 – 20 ppm, 0 – 200 % saturation; resolution 0.1 ppbTemperature compensation Automatic, for membrane permeability and oxygen solubility Accuracy ± 1 % (± 2 % with long life probe) of reading or ± 1 ppb, system accuracyDissolved OzoneRanges 0 – 5,000 ppb, 0 – 5 ppm; resolution 0.1 ppbTemperature compensation Automatic, for membrane permeability and ozone solubilityAccuracy ± 2 % of reading or ± 3 ppb, system accuracyFlowFlowrate range 0 to 9999 GPM, L / min, m3 / hrTotal flow range 0 to 9,999,999 Gallons, 37,850,000 Liters, 37,850 m3
RO % recovery range 0 to 100 %Flow velocity range Equivalent ft / s, m / sFrequency range 1 to 4000 HzCalculated parameters Ratio, sum and difference of two flowrates (4-channel)Resolution 4 significant digits, auto-ranged; up to 8 digits for total flowUpdate rate Display and outputs, once per 2 secondsInput pulses Low <1.0 volt; high >1.4 volts (36 volts max.) Accuracy ± 0.5 HzRepeatability ± 0.2 HzTemperatureRange – 40 to 200 °C (– 40 to 392 °F); resolution 0.1 ° Accuracy ± 0.25 °C (± 0.45 °F) Resolution 0.01 °C for conductivity; 0.1 °C for all other parametersPID Control Display Auto / manual status and %-output on bottom line of displaySettings Auto / manual, setpoint, deadband, non-linear corner points, control limits, proportional
gain, integral reset time (min), derivative rate time (min)Manual station Controlled by up/ down arrow keys in manual mode; remote auto/ manual selection by
discrete inputControl output types One or two analog signals, relays – pulse frequency, or relays – pulse length
78 METTLER TOLEDO US and Canada
Tran
smitt
ers
TransmittersOutstanding Performance, Advanced Electronics
Measurement Specifications (cont.)Outputs pH / Cond / DO & Ozone / Temperature Single-channel Two-channelSetpoints/alarms 4 – high, low, outside, between, USP, EP 6 – high, low, outside, between, USP or EPRelays 2 SPDT, 2 SPST reed 2 SPDT, 1 SPST NO, 1 SPST NC, 2 SPST reedAnalog output signals 2 4Discrete inputs 1 2Flow Single-channel Four-channelSetpoints/alarms 4 – high, low, outside, or between 8 – high, low, outside, or betweenRelays 2 SPDT, 1 SPST NO,1 SPST NC 2 SPDT, 1 SPST NO, 1 SPST NCAnalog output signals 2 4Discrete inputs, for external totalizer reset 1 2
Ordering Information Order NumberM300 Transmitters for Analog Sensors Outputs 1⁄4 DIN 1⁄2 DINM300 1-channel Conductivity / resistivity 2 Analog; 4 Relays 58 002 301 58 002 311M300 2-channel Conductivity / resistivity 4 Analog; 6 Relays 58 001 304 58 001 314M300 1-channel pH / ORP 2 Analog; 4 Relays 58 001 303 58 001 313M300 2-channel Multi-parameter 4 Analog; 6 Relays 58 001 306 58 001 316M300 1-channel Flow 2 Analog; 4 Relays 58 004 302 58 004 312M300 4-channel Flow 4 Analog; 4 Relays 58 001 305 58 001 315
M300 Transmitters for ISM Sensors Outputs 1⁄4 DIN 1⁄2 DINM300 ISM 1-channel Multi-parameter 2 Analog; 4 Relays 58 000 301 58 000 311M300 ISM 2-channel Multi-parameter 4 Analog; 6 Relays 58 000 302 58 000 312
Accessories Order NumberPanel mount kit for 1⁄2 DIN models 52 500 213Pipe mount kit for 1⁄2 DIN models 52 500 212Conductivity calibration module (analog) 58 082 300Adapter, VP to standard, for calibrating conductivity with VP patch cord (analog) 58 080 102Conductivity calibration module (ISM) 58 082 310Adapter panel – M300 to 200 / 2000 cutout 58 083 305
Sensor Cables for M300 (analog) Conductivity a Order Number pH / DO c / Ozone Order Number Connector Standard VarioPin (VP)b VarioPin (VP) Cables 0.3 m (1 ft) 1001-67 – – for Use At Standard Temperatures –30 to 80 °C / –22 to 176 °F 1.5 m (5 ft) 1005-67 58 080 201 1.0 m (3 ft) 52 300 107 3.0 m (10 ft) 1010-67 58 080 202 3.0 m (10 ft) 52 300 108 4.5 m (15 ft) 1015-67 58 080 203 5.0 m (16 ft) 52 300 109 7.6 m (25 ft) 1025-67 58 080 204 10.0 m (33 ft) 52 300 110 15.2 m (50 ft) 1050-67 58 080 205 15.0 m (49 ft) 52 300 14423.0 m (75 ft) – 58 080 206 20.0 m (65 ft) 52 300 141 30.5 m (100 ft) 1110-67 58 080 207 – for Use At High Temperatures –40 to 135 °C / –40 to 275 °F 46.0 m (150 ft) 1115-67 58 080 208 1.0 m (3 ft) 52 300 11161.0 m (200 ft) 1120-67 58 080 209 3.0 m (10 ft) 52 300 112ORP 5.0 m (16 ft) 52 300 113 1.0 m (3 ft) 59 902 167 10.0 m (33 ft) 52 300 114 3.0 m (10 ft) 59 902 193 15.0 m (49 ft) 52 300 237 5.0 m (16 ft) 59 902 213 20.0 m (65 ft) 52 600 118 10.0 m (33 ft) 59 902 230a 4-E sensors limited to 15.2 m (50 ft), b For VP Conductivity sensors only, c For long life dissolved oxygen sensor 58 037 220 only, use standard conductivity sensor cables at left.
79METTLER TOLEDO US and Canada
92 mm ± 0.5 mm3.62" ± 0.02"
92 m
m ±
0.5
mm
3.62
" ±
0.0
2"
90 mm / 3.54"
102 mm4.01"
102
mm
/4.0
1"90
mm
/3.5
5"
110 mm/4.33"102 mm/4.01"90 mm/3.55"
125
mm
/4.9
2"12
6 m
m/4
.96"
Power Fuse
USB
987654321
987654321
987654321
1 2 3 4 5 6 7
1 2 3 4 5 6 7
45 mm/1.77"
84 mm3.30"
42 mm1.65"
136
mm
/5.3
6"
150
mm
/5.9
"6.
5 m
m0.
256"
116 mm/4.56"150 mm/5.90"
29 mm1.13"
29 mm1.13"
138 mm ± 0.5 mm5.43" ± 0.02"
138
mm
± 0
.5 m
m5.
43"
± 0
.02"
40–60 mm1.57–2.36"
Microelectr.
Power
Pharma Water
Wastewater
Cut-out dimensions of M300, 1⁄4 DIN version
Cut-out dimensions of M300, 1⁄2 DIN versionFront and side dimensions of M300, 1⁄2 DIN version
Panel cut-out
Front and side dimensions of M300, 1⁄4 DIN version
Panel cut-out
Pipe mount kit for 1⁄2 DIN models
Conductivity Calibration ModulesThe Thornton M300 Conductivity Calibration modules provide a convenient solu-tion for in-place calibration of the Thornton M300 or M300 ISM conductivity meas-urement circuitry.
Features Overview– Includes resistances for all ranges of conductivity / resistivity and temperature– Used with 1- and 2- channel conductivity and multi-parameter models– Provided with NIST-traceable certificate of calibration– Enables efficient QA program– Includes standard patch cord connection; VP patch cord adapter available
Conductivity calibration module
Sensor Cables for M300 ISM Conductivity Order Number pH / DO / Ozone Order Number 0.3 m (1 ft) 58 080 270 1.0 m (3 ft) 59 902 167 1.5 m (5 ft) 58 080 271 3.0 m (10 ft) 59 902 193 3.0 m (10 ft) 58 080 272 5.0 m (16 ft) 59 902 213 4.5 m (15 ft) 58 080 273 10.0 m (33 ft) 59 902 230 7.6 m (25 ft) 58 080 274 15.2 m (50 ft) 58 080 275 30.5 m (100 ft) 58 080 276 45.7 m (150 ft) 58 080 277 61.0 m (200 ft) 58 080 278 91.4 m (300 ft) 58 080 279
