_m61250bfp

7/30/2019 _m61250bfp

1/52

To our customers,

Old Company Name in Catalogs and Other Documents

On April 1st, 2010, NEC Electronics Corporation merged with Renesas TechnologyCorporation, and Renesas Electronics Corporation took over all the business of bothcompanies. Therefore, although the old company name remains in this document, it is a validRenesas Electronics document. We appreciate your understanding.

Renesas Electronics website: http://www.renesas.com

April 1st, 2010

Renesas Electronics Corporation

Issued by: Renesas Electronics Corporation (http://www.renesas.com)

Send any inquiries to http://www.renesas.com/inquiry.

7/30/2019 _m61250bfp

2/52

Notice

1. All information included in this document is current as of the date this document is issued. Such information, however, is

subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please

confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to

additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.

2. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights

of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.

No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rightsof Renesas Electronics or others.

3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.

4. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of

semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,

and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by

you or third parties arising from the use of these circuits, software, or information.

5. When exporting the products or technology described in this document, you should comply with the applicable export control

laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas

Electronics products or the technology described in this document for any purpose relating to military applications or use by

the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and

technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited

under any applicable domestic or foreign laws or regulations.

6. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics

does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages

incurred by you resulting from errors in or omissions from the information included herein.

7. Renesas Electronics products are classified according to the following three quality grades: Standard, High Quality, and

Specific. The recommended applications for each Renesas Electronics product depends on the products quality grade, as

indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular

application. You may not use any Renesas Electronics product for any application categorized as Specific without the prior

written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for

which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way

liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an

application categorized as Specific or for which the product is not intended where you have failed to obtain the prior written

consent of Renesas Electronics. The quality grade of each Renesas Electronics product is Standard unless otherwise

expressly specified in a Renesas Electronics data sheets or data books, etc.

Standard: Computers; office equipment; communications equipment; test and measurement equipment; audio and visual

equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots.High Quality: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-

crime systems; safety equipment; and medical equipment not specifically designed for life support.

Specific: Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or

systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare

intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.

8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,

especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation

characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or

damages arising out of the use of Renesas Electronics products beyond such specified ranges.

9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have

specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further,

Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to

guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of aRenesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire

control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because

the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system

manufactured by you.

10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental

compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable

laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS

Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with

applicable laws and regulations.

11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas

Electronics.

12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this

document or Renesas Electronics products, or if you have any other inquiries.

(Note 1) Renesas Electronics as used in this document means Renesas Electronics Corporation and also includes its majority-

owned subsidiaries.

7/30/2019 _m61250bfp

3/52

Rev.1.0, Sep.23.2003, page 1 of 49

M61250BFPNTSC 1 chip TV signal processor

REJ03F0088-0100Z

Rev.1.0

Sep.23.2003

Description

The M61250BFP is a single-chip semiconductor integrated circuit that contains the signal processing for NTSC color

television.

All of the signal processing circuits for video intermediate frequencies, vocal intermediate frequencies, video, color,

and polarization, as well as I2C bus control, are built in, and television sets ranging from popular-class to medium-grade

sets are supported. Moreover, the M37150 8-bit microcomputer for the television and the interconnection pin are

opposite each other, so that less space is required for mounting.

Features

No VCO coil for VIF required

Internal unregulated vocal demodulator

PLL-SPLIT SIF system for FM radio

Fsc output

ACL or ABCL can be selected

Internal horizontal oscillation probe

Internal perpendicular sawtooth wave generator

Internal self-diagnosis function

Internal black peak hold, AFC2, killer filter

H & V pulse output for OSD

Internal reset circuit and clock output for microcomputer use

Internal 5 V and 8 V regulators

Applications

NTSC color television receivers

Recommended Operating Conditions

Power supply voltage range:

4.75 V to 5.25 (Pins 3, 4, 39, 40)

7.6 V to 8.4 V (Pins 12, 44)

8.3 V to 9.1 V (Pin 42)

Recommended power supply voltage:

5.0 V (Pins 3, 4, 39, 40)

8.0 V (Pins 12, 44)8.7 V (Pin 42)

7/30/2019 _m61250bfp

4/52

M61250BFP

Rev.1.0, Sep.23.2003, page 2 of 49

Pin Configuration (Top View)

NC

DEF Vcc

DRIVE GND

CHROMA APC FILTER

VIDEO/CHROMA Vcc

DRIVE Vcc

VIDEO/CHROMA GND

1

2

3

4

5

6

7

8

9

10

11

12

13

14

42

41

40

39

38

37

36

35

34

33

43

45

46

44

15

16

48

47

M61250BFP

VIF Vcc

SIF Vcc

H OUT

AFC FI LTER

LOGIC GND

FBP IN

AFT OUT

DEF GND

B OUT

R OUT

G OUT

RAMP OUT

V RAMP F/B

V RAMP CAP

TV/Y IN

VREG Vcc

EXT/C IN

Hi Vcc

LIMITER IN

X-TAL 3.58

ACL/ABCL

8.7V REG OUT

AUDIO ATT FILTER

NC

NC

7/30/2019 _m61250bfp

5/52

M61250BFP

Rev.1.0, Sep.23.2003, page 3 of 49

Pin Explanations

Pin No. Name Pin peripheral circuit DC voltage (V)

1 V RAMP CAP

2 AFT OUT 0.3 to 4.7

3

4

VIF VCC

SIF VCC

5.0 V

5 RAMP OUT 4.6

6 V RAMP FEED

BACK

7/30/2019 _m61250bfp

6/52

M61250BFP

Rev.1.0, Sep.23.2003, page 4 of 49

Pin Explanations (cont)


7 AFC FILTER 3.5 V

8

9

DEF GND

LOGIC GND

10 FBP IN VTH: 2.0 V

(FBP Vth L = OFF)

VTH: 1.0 V

(FBP Vth L = ON)

11 H OUT VOL: 0.0 V

VOH: 5.4 V

12 DEF VCC

13 NC

14

15

16

R OUT

G OUT

B OUT

7/30/2019 _m61250bfp

7/52

M61250BFP

Rev.1.0, Sep.23.2003, page 5 of 49



17 H VCO

FEEDBACK

3.0 V

18 INTELLIGENT

MONITOR

19 INV FBP OUT VOL: 0.0 V

VOH: 5.0 V

20 V PULSE OUT VOL: 0.0 V

VOH: 5.0 V

7/30/2019 _m61250bfp

8/52

M61250BFP

Rev.1.0, Sep.23.2003, page 6 of 49



21

22

23

B IN

G IN

R IN

(1) Digital OSD

VIL: 0.0 V

VIH: 3.0 V

(2) Analog OSD

0.7 Vp-p

24 FAST BLK 0.0-0.5 V: INT RGB

1.5-3.0 V: H TONE

4.0-5.0 V: EXT RGB

25 CLK CONTROL VTH: 3.0 V

26 SDA VIL: 0.75 V

VIH: 4.25 V

7/30/2019 _m61250bfp

9/52

M61250BFP

Rev.1.0, Sep.23.2003, page 7 of 49



27 SCL VIL: 0.75 V

VIH: 4.25 V

28 POWER ON

CONTROL

VTH: 3.0 V

29 fsc OUT 1 3.0 V

30 MCU RESET H: 5.0 V

L: 0.0 V

7/30/2019 _m61250bfp

10/52

M61250BFP

Rev.1.0, Sep.23.2003, page 8 of 49



31 Y SW OUT 1.7 V

32 MCU 5.7 VREG

OUT

5.7 V

33 ACL/ABCL

34 X-TAL 3.58 3.3 V

3536

DRIVE GNDVideo/Chroma

GND

0.0 V

7/30/2019 _m61250bfp

11/52

M61250BFP

Rev.1.0, Sep.23.2003, page 9 of 49



37 CHROMA APC

FILTER

3.2 V

38 EXT/C IN 1.7 V

39

40

DRIVE VCC

Video/Chroma

VCC

5.0 V

41 TV/Y IN 1.7 V

42 VREG VCC 8.7 V

43 AUDIO ATT

FILTER

2.75 V to 3.25 V

44 Hi VCC 8 V

45

46

NC

7/30/2019 _m61250bfp

12/52

M61250BFP

Rev.1.0, Sep.23.2003, page 10 of 49



47 8.7 VREG OUT 8.7 V

48 LIMITER IN 2.5 V

49 5.7 VREG OUT 5.7 V

50 INTER

CARRIER OUT

2.3 V

7/30/2019 _m61250bfp

13/52

M61250BFP

Rev.1.0, Sep.23.2003, page 11 of 49



51 AUDIO OUT 2.3 V

52 AUDIO BYPASS 2.3 V

53 EXT AUDIO IN 3.0 V

54 FM DIRECT

OUT

3.0 V

7/30/2019 _m61250bfp

14/52

M61250BFP

Rev.1.0, Sep.23.2003, page 12 of 49



55 VIF VCO

FEEDBACK

3.0 V

56

57

SIF GND

VIF GND

58 VIDEO OUT 2.7 V

59 RF AGC OUT 0.3 to 4.7 V

60 VIF APC

FILTER

3.0 V

7/30/2019 _m61250bfp

15/52

M61250BFP

Rev.1.0, Sep.23.2003, page 13 of 49



61

62

VIF AGC

FILTER 2

VIF AGC

FILTER 1

2.3 V

63

64

VIF IN (1)

VIF IN (2)

1.6 V

7/30/2019 _m61250bfp

16/52

7/30/2019 _m61250bfp

17/52

M61250BFP

Rev.1.0, Sep.23.2003, page 15 of 49

Absolute Maximum Ratings

(Ta = 25C)

Item Symbol Rating Unit

Power supply voltage VCC 6.0, 10.0 V

Internal power dissipation Pd 2026 mW

Thermal derating Kt 16.2 mW/C

Ambient operating temperature Topr 20 to +65 C

Storage temperature Tstg 40 to +150 C

Thermal Derating (Maximum Ratings)

Ambient temperature (C)

InternalPowe

rdissipationPd(W)

0 25 50 75 100 125 150

2.0

1.5

1.0

0.5

2.5

65

1.38

7/30/2019 _m61250bfp

18/52

M61250BFP

Rev.1.0, Sep.23.2003, page 16 of 49

I2C Bus Table

1. SLAVE ADDRESS= BAH(WRITE), BBH(READ)A6 A5 A4 A3 A2 A1 A0 R/W

1 0 1 1 1 0 1 1/0

2. WRITE TABLE(input bytes )SUB ADDRESS DATA

HEX BIN D7 D6 D5 D4 D3 D2 D1 D0 INITIAL

(inhibited) RF Delay Adj

00H 00000000 0 1 0 0 0 0 0 0 40H

(inhibited) VIFFreq5875 VIF VCO ADJ

01H 00000001 0 0 1 0 0 0 0 0 20H

Video Mute Audio EXT C. Clip level TRAP Off Video T Sharp ABCL Black Stre. Off Take Off

02H 00000010 0 0 0 0 0 0 0 0 00H

Audio Mute Audio ATT

03H 00000011 0 0 0 0 0 0 0 0 00H

ABCL Gain AFT Defeat Video Tone

04H 00000100 0 0 V1 V0 V0 V0 V0 V0 20H

EXTRGB C. Clip Contrast Control

05H 00000101 V0 V1 V0 V0 V0 V0 V0 V0 40H

VIF Video Out Gain Y/C EXT Y DL Fine Adj Y DL Time Adj

06H 00000110 1 0 0 V0 V0 0 0 0 80H

VIF Defeat Tint Control

07H 00000111 0 V1 V0 V0 V0 V0 V0 V0 40H

Blue Back Color Control

08H 00001000 V0 V1 V0 V0 V0 V0 V0 V0 40H

HV BLK OFF VOUT STOP FSC FREE HTONE SW (inhibited)

09H 00001001 0 0 0 0 0 1 0 0 04HBrightness Control

0AH 00001010 V1 V0 V0 V0 V0 V0 V0 V0 80H

(inhibited) Drive(R)

0BH 00001011 0 1 0 0 0 0 0 0 40H

(inhibited) Drive(B)

0CH 00001100 0 1 0 0 0 0 0 0 40H

Cut Off(R)

0DH 00001101 1 0 0 0 0 0 0 0 80H

Cut Off(G)

0EH 00001110 1 0 0 0 0 0 0 0 80H

Cut Off(B)

0FH 00001111 1 0 0 0 0 0 0 0 80H

White Back V-free (inhibited) H VCO Adj

10H 00010000 0 0 1 0 0 1 0 0 24H

(inhibited) V-Size

11H 00010001 0 0 1 0 0 0 0 0 20H

Monitoring Gamma Control TRAP Fine Adj

12H 00010010 0 0 0 0 0 0 0 0 00H

H-free V.1Window YSW LPF H Start Service SW V Shift

13H 00010011 0 0 0 0 0 0 0 0 00H

Black Strech Discharge Black Strech Charge S.Slice Down2 S.Slice Down1 (inhibited)

14H 00010100 0 0 0 0 0 0 1 1 03H

AFC1 Gain AFC2 Gain OSD level Analog OSD US/JPN SW Killer level

15H 00010101 0 0 0 0 0 0 0 0 00H

VSYNCDET Aoto slice down FBP Vth L AFC2 H Phase

16H 00010110 1 0 0 1 0 0 0 0 90H

(reserved)

17H 00010111 0 V1 V0 V0 V0 V0 V0 V0 40H

Test1 (inhibited)

18H 00011000 0 0 0 0 0 0 0 0 00H

BGPFBP OFF Test2 (inhibited)

19H 00011001 0 0 0 0 0 0 0 0 00H

Test3 (inhibited)

1AH 00011010 0 0 0 0 0 0 0 0 00H

(inhibited)

1BH 00011011 0 0 0 0 0 0 0 0 00H

TEST4 VFREE INT VBLKSHIFT ON

1CH 00011100 0 0 0 0 0 1 0 0 04H

NOTE: V0 / V1 ==> V- LATCH BIT

3. READ TABLE (output bytes)SUB ADDRESS D7 D6 D5 D4 D3 D2 D1 D0

00H 00000000 KILLERB (not asigned) VCOINB STDETB AFT0 AFT1 HCOINB (not asigned)

VBLK SHIFT(inhibited)

7/30/2019 _m61250bfp

19/52

M61250BFP

Rev.1.0, Sep.23.2003, page 17 of 49

Bus Functions

WRITE

FUNCTION BIT SUB

ADD

DATA DISCRIPTION INI-

TIAL

NOTE

RF delay adj 7 00H D0-D6 RF AGC delay point adjustment 40H

VIF VCO adj 6 10H D0-D5 VIF VCC free-running frequency adjustment

(adjust by setting VIF Defeat = 1 to center the AFT output)

20H

VIF freq. 58.75 1 01H D6 IF 45.75/58.75 switching; 0: 45.75, 1: 58.75 MHz 0

VIF Video out

gain

3 06H D5-D7 Pin 58 IVF video-detection-wave output level adjustment 80H

AFT defeat 1 04H D6 AFT output on/off (defeat) switching; 0: AFT on (non defeat), 1: Defeat 0

VIF defeat 1 07H D7 VIF AGC gain normal/minimum switching; 0: AGC function,

1: Defeat (minimum gain)

0

Audio ATT 7 03H D0-D6 Pin 51 audio output level adjustment 00H

Audio EXT 1 02H D6 Audio internal signal and external signal input switching;

0: internal, 1: external

0

VIF

SIF

Audio mute 1 03H D7 Pin 53 audio direct output on/off (mute) switching;

0: audio on (non-muted), 1: mute

0

Video tone 6 04H D0-D5 Sharpness level control 20H V Latch

Contrast control 7 05H D0-D6 Contrast level control 40H V Latch

EXTRGB

contrast clip

1 05H D7 EXT RGB contrast lower-limit clipping on/off; 0: clipping on, 1: clipping off 0 V Latch

C. clip level 1 02H D5 EXT RGB contrast lower-limit clipping level switching;

0: low (20H), 1: high (40H)

0

Y DL time adj 2 06H D0-D1 Y signal delay adjustment X0H

Y DL fine adj 1 06H D2 Y signal delay fine adjustment 0

EXT 1 06H D3 Video input pins 41/38 switching; 0: pin 41, 1: pin 38 0 V Latch

Y/C 1 06H D4 Pins 38/41 composite input/YC input switching; 0: composite, 1: Y/C mode 0 V Latch

Y SW LPF 1 13H D5 Pin 31 (Y SW OUT) output f-characteristic switching;

0: flat, 1: LPF (fc=700 kHz)

0

Video tone

sharp

1 02H D3 Video tone level two level (sharp/soft) switching; 0: standard (soft), 1: sharp 0

Video mute 1 02H D7 Y signal output on/off (mute) switching; 0: mute off, 1: mute 0

TRAP off 1 02H D4 Y signal chroma trap on/off switching; 0: trap on, 1: trap off 0

TRAP fine adj 2 12H D0-D1 Chroma trap frequency fine adjust X0HBlack stretch off 1 02H D1 Black stretch circuit on/off switching;

0: black stretch on, 1: black stretch off

0

Black stretch

charge

2 14H D4-D5 Black stretch charge time constant adjustment 0XH

Black stretch

discharge

2 14H D6-D7 Black stretch discharge time constant adjustment 0XH

VIDEO

Gamma control 2 12H D2-D3 Gamma level adjustment X0H

Tint control 7 07H D0-D6 Hue control 40H V Latch

Color control 7 08H D0-D6 Color level control 40H V Latch

Take off 1 02H D0 Chroma BPF take-off function on/off switching; 0: BPF; 1: take off 0

US/JPN SW 1 15H D1-D3 US mode/JPN mode switching; 100: US mode, 011: JPN mode 0

Killer level 1 15H D0 Colorkiller sensitivity switching (active shallow direction);

0: 41 dB,1: 34 dB

0

CHROMA

Fsc 1 09H D5 Xtal oscillation circuit forced free-running mode; 0: off, 1: free-running 0

7/30/2019 _m61250bfp

20/52

M61250BFP

Rev.1.0, Sep.23.2003, page 18 of 49

Bus Functions (cont)

WRITE (cont)

FUNCTION BIT SUB

ADD

DATA DISCRIPTION INI-

TIAL

NOTE

Brightness

control

8 0AH D0-D7 Bright level control 80H V Latch

Driver (R) 7 0BH D0-D6 R output level control 40H

Driver (B) 7 0CH D0-D6 B output level control 40HCut off (R) 8 0DH D0-D7 R output DC level control 80H

Cut off (B) 8 0EH D0-D7 G output DC level control 80H

Cut off (B) 8 0FH D0-D7 B output DC level control 80H

Blue back 1 08H D7 Blue back screen on/off switching; 0: off, 1: blue back 0

White back 1 10H D7 White raster on/off switching; 0: off, 1: white back 0

ABCL 1 02H D2 ABCL on/off switching; 0: off, 1: ABCL on 0

ABCL gain 1 04H D7 ABCL sensitivity low/high switching; 0: low, 1: hi 0

OSD level 1 15H D5 OSD level (70%/90%) switching; 0: 70%, 1: 90% 0

HTONE SW 1 09H D4 Halftone on/off switching; 0: off, 1: halftone 0

RGB

Analog OSD 1 15H D4 OSD input digital/analog switching; 0: digital, 1: analog 0

AFC2 H phase 5 16H D0-D4 Screen horizontal position adjustment 90H

Ramp stop 1 09H D6 Pin 5 VOUT (ramp/pulse) forced stop mode (when stopped, pin 5 at DC

GND level); 0: VOUT, 1: STOP

0

Service SW 1 13H D3 Vertical output on/off switching; 0: vertical output on, 1: vertical output off 0

H start 1 13H D4 Horizontal output out/stop switching; 0: stop, 1: H out 0

AFC 1 gain 1 15H D7 Horizontal AFC gain a high/low switching; 0: low, 1: hi 0

AFC 2 gain 1 15H D6 Horizontal AFC2 gain high/low switching; 0: high, 1: low 0

H VCO adj 3 10H D0-D2 H VCO free-running frequency adjustment 24H

V shift 3 13H D0-D2 Vertical ramp start timing adjustment X0H

V-size 6 11H D0-D5 Vertical ramp amplitude adjustment 20H

H-free 1 13H D7 Horizontal output forced free-running mode on/off switching;

0: off, 1: horizontal free-running

0

V-free 1 10H D6 Vertical output forced free-running mode on/off switching;

0: off, 1: vertical free-running

0

S slice down 1 1 14H D2 Sync detection slice level (50%/30%) switching; 0: 50%, 1: 30% 0

S slice down 2 1 14H D3 Sync detection slice level (50%/40%) switching; 0: 50%, 1: 40% 0

Audio slicedown

1 16H D6 Sync detection slice level (50%/40%) switching during image period;0: slice level fixed, 1: slice level reduced

0

FBP Vth L 1 16H D5 Pin 10 (FBP in) slice level switching during image period;

0: Vth = 2V (HBLK width: narrow), 1: Vth = 1 V (HBLK width: wide)

0

HV BLK OFF 1 09H D7 Horizontal/vertical blanking on/off switching; 0: blanking on, 1: blanking off 0

V SYNK DET 1 16H D7 Vertical minimum sync detection width switching;

0: sync detect width =18 s, 1: sync detect width =14 s

90H

1 window 1 13H D6 Vertical sync detection switching (1 window/2 window s);

0: 2 windows, 1: 1 window

0

BGPFBP OFF 1 19H D7 Internal BGP on/off switching when no FBP input; 0: BGP on, 1: BGP off 0

VREF INT 1 1CH D6 Interface/non-interface switching at vertical free-running 04H

VBLK SHIFT

ON

1 1CH D3 0: Normal (VBLK shifts by VSHIFT),

1: Vertical blanking width can be setted by un-interlocking VSHIFT

04H

DEF

VBLK SHIFT 3 1CH D0-D2 D0-D2: VBLK SHIFT (Initial value: 100=4) 04H

Monitoring 4 12H D4-D7 Pin 18 intelligent monitoring mode switching 0XHTest1 1 18H D6-D7 NO use for Customer (Test bit) 0

Test2 1 19H D6 NO use for Customer (Test bit) 0

Test3 1 1AH D6-D7 NO use for Customer (Test bit) 0

Test4 1 1CH D6 NO use for Customer (Test bit) 04H

7/30/2019 _m61250bfp

21/52

M61250BFP

Rev.1.0, Sep.23.2003, page 19 of 49

READ

FUNCTION BIT SUB

ADD

DATA DISCRIPTION

KILLERB 1 00H D7 Colorkiller information output; "1" when killer off

AFT0 1 00H D3 AFT information output (See note 1)

AFT1 1 00H D2 AFT information output (See note 1)

HCOINB 1 00H D1 Horizontal sync detection; "1" when asynchronous

FM STDETB 1 00H D6 FM radio mode detection; "1" when not detected

VCOINB 1 00H D5 Vertical sync detection; "1" when asynchronousSTDETB 1 00H D4 TF mode detection; "1" when not detected

Note: 1.

7/30/2019 _m61250bfp

22/52

7/30/2019 _m61250bfp

23/52

M61250BFP

Rev.1.0, Sep.23.2003, page 21 of 49

Input Signals

1. 10.1 VIF/SIF Block

SG No. Signal description (50 termination)

SG1 fo = 45.75 MHz, 90 dB, fm = 20 kHz, AM 77.8%

SG2 fo = 58.75 MHz, 90 dB, fm = 20 kHz, AM 77.8%

SG3 fo = 45.75 MHz, 90 dB, CW

SG4 f1 = 45.75 MHz, 90 dB, CWf2 = 45.75 4.5MHz, 70 dB, CW

SG5 fo = 45.75 MHz, amplitude width variable, fm = 20 kHz, AM 77.8%

SG6 fo = 45.75 MHz, amplitude width variable, fm = 20 kHz, AM 16%

SG7 fo = 45.75 MHz, 80 dB, fm = 20 kHz, CW

SG8 fo = 45.75 MHz, 110 dB, fm = 20 kHz, CW

SG9 fo = 40.75 to 50.75 MHz (frequency variable), 90 dB, CW

SG10 fo = 45.75 MHz, 90 dB, CW

SG11 fo = 45.75 MHz, 90 dB, CW

SG12 fo = 53.75 to 63.75 MHz (frequency variable), 90 dB, CW

SG13 f1 = 45.75 MHz, 90 dB, RED raster signal, AM = 87.5% video modulation,

f2 = 4.5 4.5MHz, CW, P/S = 20 dB

SG14 fo = 45.75 MHz, standard 10-step wave, sync rate: 28.6%, AM = 87.5% video modulation,

sync chip level: 90 dB

SG15 fo = 45.75 MHz, 93 dB, CW

SG16 fo = 45.75 MHz, 73 dB, CW

SG17 fo = 4.5 MHz, 100 dB, fm = 400 Hz, FM 25 kHz dev.

SG18 fo = 4.5 MHz, 100 dB, fm = 400 kHz, AM 30%

SG19 fo = 4.5 MHz, 100 dB, CW

SG20 fo = 400 Hz, 500 mVrms, CW

SG21 fo = 0.5 to 8.5 MHz, 100 dB, fm = 400 kHz, FM 25 kHz dev.

7/30/2019 _m61250bfp

24/52

M61250BFP

Rev.1.0, Sep.23.2003, page 22 of 49

2. Video/Chroma/RGB/DEF Block

SG. E

SG. A

SG. B

SG. C

SG. D

SG. F

1.5s 5.8s

4.7s

f

2.0V

0V

20s 24s

SG No. Signal description (75 termination)

NTSC format APL 100% typical

video signal. Vertical signal is

interlaced at 60 Hz.

1.5s 5.8s

4.7s1Vp-p

0.714V

0.286V

In the SG.A signal, the Lumi. signal

frequency and amplitude can be

changed. However, typical amplitude

is 0.714 Vp-p.

In the figure on the right, the Lumi.

signal is represented by f.

NTSC typical monochrome videosignal. Vertical signal is interlaced

at 60 Hz.

1.5s5.8s

4.7s

0.572V

0.286V

0.286V

NTSC format video signal;

APL variable. Vertical signal is

interlaced at 60 Hz.

1.5s 5.8s

4.7s Vy

0.286V

NTSC format monochrome video signal.

In the SG.C signal, the burst and chroma

part frequency and amplitude can be changed.

Vertical signal is interlaced at 60 Hz.

1.5s5.8s

4.7s

0.286V

VebVec

feb fec

Typical state:

Veb=0.286V,

Vec=0.572V

f eb=f ec=3.579545MHz

0V

20s 24s

Fast blanking signal; synchronized with

video input signal.

VosdFast blanking signal;

synchronized with video input signal.

7/30/2019 _m61250bfp

25/52

M61250BFP

Rev.1.0, Sep.23.2003, page 23 of 49

2. Video/Chroma/RGB/DEF Block (cont)

Signal description (75 termination)

SG. H

Duty 90%, variable frequency, variable level. (Typical: 1 Vp-p)

SG. I

1Vp-p

SG No.

1Vp-p

SG. GNTSC format rainbow color bar video signal.

Vertical signal is interlaced at 60 Hz.

NTSC format typical color bar

video signal;

vertical signal is interlaced at 60 Hz.

1.5s 5.8s

4.7s 0.714V

0.286V

Duty variable (typical 95%), frequency variable, level variable(Typical: 1 Vp-p)

SG. J

SG. K

NTSC format, typical 8-step wave signal;

vertical signal is interlaced at 60 Hz.

7/30/2019 _m61250bfp

26/52

M61250BFP

Rev.1.0, Sep.23.2003, page 24 of 49

Setup instruction for evaluation PCB

1. Horizontal blanking pulse adjustment

The horizontal blanking pulse timing and pulse width are adjusted using the variable resistances of a one-shot

multivibrator, as shown below.

Pin 11 (H OUT)

Horizontal

blanking pulse

8s

12s

The timing is adjusted to 8 s using the pin 15 variable resistance of the M74LS221P TTL IC. Also, the pulse width is

adjusted to 12 s using the pin 7 variable resistance.

2. VIF VOC adjustment

Before carrying out the M61250BFP measurements, the VIF VCO should be adjusted using the following procedure.

(1) Input the I2C bus data for the VIF frequency (01H D6) based on the IF frequency. (45.75 MHz: 0, 58.75 MHz: 1)

(2) Input the I2C bus data for VIF Defeat ON (07H D7 = 1).

(3) Adjust the I2C bus data for the VCO control (01H D0 D5) so that the voltage of Pin 2 (AFT OUT) is closest to

2.5 V.

(4) Input the I2C bus data for VIF Defeat OFF (07H D7 = 0).

Voltage

45.75MHz

2.5V

Frequency(or 58.75MHz)

3. H VCO adjustment

Prior to measurement of the M61250BFP, the following method is used for H VCO adjustment.

(1) The H VCO control I2C bus data (1 CH D0-D3) is adjusted, and the pin 11 (H OUT) frequency is set to approx.

15.734 kHz.

7/30/2019 _m61250bfp

27/52

M61250BFP

Rev.1.0, Sep.23.2003, page 25 of 49

Electrical Characteristics

(Ta = 25C)

Symbol

Item

Inputsig

nal

Test

point

Limits

Unit

No

tes

Subaddress

Pin

SG

Min.

Typ.

Max

00H01H02H03H04H05H06H07H08H

09H0AH0BH0CH0DH0EH0FH10H11H12H13H14H15H16H1

7H18H19H1AH1BH1CH

ICC

Typicalconditions

Pin28=5V,pin25=5V,pin24=0V

40

20

02

00

20

40

80

40

40

00

80

40

40

80

80

80

24

20

00

10

00

00

88

40

00

00

00

00

00

ICC5V

5Vcurrentdrawnbythe

circuit(pins3,4,39,40)

-

-

3,4,39,4

0

95

115

135

mA

VIF/SIF/VIDEO/ChromaVcc

ICC34

Pins3and4current

drawnbythecircuit

-

-

3,4

-

57

-

mA

Referencedata

VIF/SIF/Vcc

ICC3940

Pins39and40current

drawnbythecircuit

-

-

39,4

0

-

57

-

mA

Referencedata

VIDEO/ChromaVcc

ICC8V

8Vcurrentdrawnbythe

circuit

-

-

12,44

32

42

52

mA

Deflection/RGBDrive8VV

cc

ICC12

Pin12currentdrawn

bythecircuit

-

-

12

-

25

-

mA

Referencedata

DeflectionVcc

ICC44

Pin44currentdrawn

bythecircuit

-

-

44

-

17

-

mA

Referencedata

RGBDrive8VVcc

ICC42

Pin42currentdrawn

bythecircuit

-

-

42

4

6

8

mA

8.7VREGVcc

Power

Powersupplycircuit

typicalconditions


40

adj02

00

20

40

80

40

40

00

80

40

40

80

80

80

24

20

00

10

00

00

88

40

00

00

00

00

00

Vth28

Poweroncontrol

thresholdvoltage

-

-

28

2.6

3

3.4

V

V47H

8.7VREGoutputvoltage1

-

47

8.3

8.7

9.1

V

Pin28=5V

V47L


-

47

-

0

0.3

V

Pin28=0V

V49


-

49

5.5

5.75

6.0

V

Pin28=5V

V32H1

MCU5.7VREG

outputvoltage1

-

-

32

5.4

5.65

5.9

V

Pin28=5V

V32H2

MCU5.7VREG

outputvoltage2

-

-

32

5.4

5.65

5.9

V

Pin28=0V

Reset

Resettypicalconditions

Pin28=5V,pin25=5V

40

adj02

00

20

40

80

40

40

00

80

40

40

80

80

80

24

20

00

10

00

00

88

40

00

00

00

00

00

V30H

Maximumresetoutput

voltage

-

-

30

4.5

5

5.5

V

V30L

Minimumresetoutput

voltage

-

-

30

-

0

0.5

V

TH32

Resetthresholdvoltage

-

-

32

4

4.2

4.4

V

IIC

IICtypicalconditions

-

-

-

-

-

-

-

40

adj02

00

20

40

80

40

40

00

80

40

40

80

80

80

24

20

00

10

00

00

88

40

00

00

00

00

00

IACK

ACKcurrent

-

-

-

1

-

mA

Referencedata

VIL

SCL/SDAVTH(L)

-

-

26,27

0.0

0.75

1.5

V

VIH

SCL/SDAVTH(H)

-

-

26,27

3.5

4.25

5.0

V

FSCL

Clockfrequency

-

-

27

-

-

100

kHz

7/30/2019 _m61250bfp

28/52

M61250BFP

Rev.1.0, Sep.23.2003, page 26 of 49

Test

point

SG

Min.

Typ.

Max.

00H

01H

02H

03H

04H

05H

06H

07H

08H

09H

0AH0BH0CH0DH0EH0FH

10H

11H

12H13H

14H

15H

16H

17H

18H

19H

1AH1BH1CH

VIF

IFtypicalcondition

s


40

adj02

00

20

40

80

40

40

00

80

40

40

80

80

80

24

20

001

0

00

00

88

40

00

00

00

00

00

Vdc

Video-detection-waveform

outputdirectcurrentvoltage

-

-

58

2.2

2.7

3.2

V

Pin62=0V

Vo4575


output(45.75MHz

)

63,64

SG1

58

0.8

1.2

1.5

Vpp

Vo5875


output(48.75MHz

)

63,64

SG2

58

0.8

1.2

1.5

Vpp

+40

P/N

VideoS/N

63,64

SG3

58

43

50

-

dB

Vf

Videofrequency

characteristics

63,64

SG4

58

4

5.4

-

MHz

Vinmin

Inputsensitivity

63,64

SG5

58

-

45

50

dB

Vinmax

Maximumallowableinput

63,64

SG6

58

100

108

-

dB

GR

AGcontrolrange

-

-

-

50

-

-

dB

Vomax

-Vomin

V63H

IFAGCmaximum

voltage

-

-

62

3.8

4.3

4.8

V

V63T

IFAGCvoltage(80dB)

63,64

SG7

62

2.3

2.8

3.3

V

V63L

IFAGCminimumvoltage

63,64

SG8

62

1.3

1.8

2.3

V

Vdefeat

VIFDETEATfunction

63,64

SG1

58

0

0.1

0.2

Vpp

80

AFT

AFT-detection-waveform

sensitivity

63,64

SG9

2

7

10

13

mV/kHz

V60H

AFTmaximumvoltage

63,64

SG10

2

4.2

4.7

-

V

V60L

AFTminimumvoltage

63,64

SG11

2

-

0.3

0.8

V

V60D

AFTDETEATfunc

tion

-

-

2

2.0

2.5

3.0

V

80

VCU45

Capturerange

(45.75MHzupper)

63,64

SG9

58

1.5

2.2

-

MHz

Centerfrequency=45.75MHz

VCL45

Capturerange

(45.75MHzlower)

63,64

SG9

58

-

-1.8

-1.1

MHz


VCT45

Capturerange

(45.75MHztotal)

-

-

58

2.6

4.0

-

MHz

VCU45-VCL45

VCU58

Capturerange

(58.75MHzupper)

63,64

SG12

58

1.5

2.2

-

MHz


+40

VCL58

Capturerange

(58.75MHzlower)

63,64

SG12

58

-

-1.8

-1.1

MHz


+40

VCT58

Capturerange

(58.75MHztotal)

-

-

58

2.6

4.0

-

MHz

VCU58-VCL58

IM

Intermodulation

63,6

4

SG13

58

-

42

-

dB

Referen

cedata

Symbol

Item

Inputsignal

Limits

Unit

Notes

Subaddress

Pin

7/30/2019 _m61250bfp

29/52

M61250BFP

Rev.1.0, Sep.23.2003, page 27 of 49

Test

point

Limits

SG

00H

01H

02H

03H

04H

05H

06H

07H

08H

09H

0AH

0BH

0CH0DH0EH

0FH

10H

11H

12H13H

14H

15H

16H

17H

18H

19H

1AH

1BH

1CH

DG

DG

63,6

4

SG14

58

-

3

-

%

Referen

cedata

DP

DP

63,6

4

SG14

58

-

3

-

deg

Referen

cedata

V62H

RFAGmaximumvoltage

63,64

SG15

59

4.3

4.8

-

V

V62L

RFAGminimumv

oltage

63,64

SG16

59

-

0.2

0.7

V

DLPH

RFAGdelaymaximum

point

63,64

SG5

59

95

108

-

dB

00

DLPL

RFAGdelayminim

um

point

63,64

SG5

59

-

58

71

dB

7F

DLP

RFAGdelaypoint

adjustmentrange

-

-

-

33

43

-

dB

DLPH-D

LPL

00-7F

SPN

Syncrate

63,64

SG14

58

25

28

33

%

SIF

SIFtypicalconditio

ns

Pin28=

5V,pin25=5V,pin24=0V

40

adj

02

00

80

20

40

80

40

40

00

80

40

40

80

80

80

24

20

001

0

00

00

88

40

00

00

00

00

00

VAF

AFdirectoutputDCvoltage

-

-

54

2.2

3.0

3.8

V

VoAF

AFdirectoutputvo

ltage

48

SG17

54

280

400

520

mVrms

THDAF

AFdistortionrateo

utput

48

SG17

54

-

0.5

3

%

LIM

Inputlimitsensitivity

48

SG17

54

-

46

58

dB

AM

AMR

R

48

SG18

54

48

54

-

dB

AFSN

AFS/N

48

SG19

51

49

55

-

dB

GEAu

EXTAudiogain

53

SG20

51

-4.1

-2.1

-0.1

dB

40

7F

7F

SCFU

SIFcapturerange

(upper)

48

SG21

54

5.5

7.5

-

MHz

Variable

inputfrequency

SCFL

SIFcapturerange

(lower)

48

SG21

54

-

3

4.0

MHz

Variable

inputfrequency

VOL-

max

Audiooutputmaximum

amplitude

48

SG17

51

280

400

550

mVrms

7F

VOL-minAudiooutputmaximum

attenuation

48

SG17

51

-

-80

-69

dB

Min.

Typ.

Max.

Symbol

Item

Inputsignal

Unit

Notes

Subaddress

Pin

7/30/2019 _m61250bfp

30/52

M61250BFP

Rev.1.0, Sep.23.2003, page 28 of 49

Test

point

Limits

SG

00H01H02H03H04H

05H06H07H08H09H0AH0BH0CH0DH0EH0FH10H11H12H13H14H15H16H17H18H19H1AH1BH1CH

VIDEO

Videotypicalcond

itions

-

-

-

-

-

-

-

Pin28=

5V,pin25=5V,pin24=0V

40

adj02

00

20

40

80

40

40

00

80

40

40

80

80

80

24

20

00

10

00

00

88

40

00

00

00

00

00

2AGTV

VideoSWoutputlevel

(TVinput)

41

SG.A

31

1.6

2.0

2.6

Vpp

2AGEV

VideoSWoutputlevel

(Externalinput)

38

SG.A

31

1.6

2.0

2.6

Vpp

8C

Ymax

Maximumvideooutput

38

SG.A

14,15,

16

2.9

4.2

5.6

V

7F

8C

00

GY

Videogain

38

SG.A

14,15,

16

12

15

18

dB

7F

8C

7F

8C

00

00

FBY

Videofrequency

characteristic

38

SG.B

14,15,

16

-4

-1

-

dB

f=5MHz

,C-trap:OFF

10

CRF1

Chromatrapatten

uation1

38

SG.C

14,15,

16

-

-

-18

dB

8C

00

02

TRF

Chromatrapmaximum

attenuation

38

38

38

38

38

SG.C

14,15,

16

-

-

-20

dB

AtTrap

fineadj.adjustment

8C

00

00-03

YDL1

YDLtime1

SG.A

14,15,

16

190

260

330

nS

8C

00

YDL2

YDLtime2

SG.A

14,15,

16

120

200

280

nS

YDL2=measuredvalue-YDL1measuredvalue

8D

00

YDL3

YDLtime3

SG.A

14,15,

16

120

200

280

nS


8E

00

YDL4

YDLtime4

SG.

38

38

38

38

SG.

SG.

SG.

SG.

38

SG.A

14,15,

16

120

200

280

nS


8F

00

GTnor

Videotonecontrol

characteristic1

B

14,15,

16

1.0

1.4

1.8

V

f=2.5MHz

8C

00

GTmax

Videotonecontrol

characteristic2

B

14,15,

16

7

10

14

dB

f=2.5MHz

3F

8C

00

GTmin

Videotonecontrol

characteristic3

B

14,15,

16

-6

-2

2

dB

f=2.5MHz

00

8C

00

GT2M

Videotonecontrol

characteristic4

B

14,15,

16

-1

2

5

dB

f=2MHz

8C

00

GT5M

Videotonecontrol

characteristic5

B

14,15,

16

-9

-5

-1

dB

f=5MHz

8C

00

BLS

Blackexpansion

characteristic

38

SG.K

14,15,

16

0.01

0.03

0.05

V

adj8C

00

adj

80

VMF

Videomutefunctio

n

38

SG.A

14,15,

16

-

-45

-35

dB

80

7F

8C

00

Min.

Typ.

Max.

Symbol

Item

Inputsignal

Unit

Notes

Subaddress

Pin

7/30/2019 _m61250bfp

31/52

M61250BFP

Rev.1.0, Sep.23.2003, page 29 of 49

Test

point

Limits

SG

00H

01H

02H

03H

04H

05H

06H

07H

08H

09H

0AH0BH0CH0DH0EH0FH

10H

11H

12H13H

14H

15H

16H

17H

18H

19H

1AH1BH1CH

CHROM

A

Chromatypicalc

onditions

-

-

-

-

-

-

-


Veb,Ve

c:typicalinputlevel+6dB

40

adj02

00

20

40

80

40

40

00

80

40

40

80

80

80

24

20

001

0

00

00

88

40

00

00

00

00

00

CnorR

Chromatypicaloutput

(R-Y)

38

SG.C

59

390

560

790

mV

88

C0

40

CnorB

Chromatypicaloutput

(B-Y)

38

38

38

SG.C

59

640

920

1290

mV

88

80

40

ACC1

ACCcharacteristic

1

SG.

38

SG.

38

SG.

38

SG.

SG.

38

SG.E

59

-3

0

3

dB

88

80

40

ACC2

ACCcharacteristic

2

SG.E

59

-4.5

0

1.5

dB

Veb,Ve

c:typicalinputlevel-20dB

88

80

40

OV

Chromaoverload

characteristic

38

SG.E

59

-3

2

5

dB

V=800

mV

80

40

VikN

Killeroperationinp

ut

level

38

SG.E

59

-

-43

-35

dB

Veb,Ve

c:variable

88

88

88

80

40

KillP

Colorremainingon

colorkilling

38

SG.E

59

-

-45

-30

dB

Veb=0mV

80

40

APCU

APCpull-inrange(upper)

38

SG.E

59

-

-600

-300

Hz

feb=fec:variable

88

80

40

APCL

APCpull-inrange(lower)

38

SG.E

59

300

600

-

Hz

feb=fec:variable

88

88

80

40

R/BN

Demodulationratio

38

SG.E

59

0.40

0.57

0.80

-

fec=feb+

50kHz

C0/

80

40

R/BU

Demodulationratio

(USmode)

38

SG.J

14,1

5

-

1.33

-

-

Referen

cedata

20

88

FF

08

C0/

80

40

G/BU

Demodulationratio

(USmode)

38

SG.J

15,1

6

-

0.43

-

-

Referen

cedata

20

88

FF

08

C0/

80

40

R/BJ

Demodulationratio

(JPNmode)

38

SG.J

14,1

5

-

1.31

-

-

Referen

cedata

20

88

FF

06

C0/

80

40

G/BJ

Demodulationratio

(JPNmode)

38

SG.J

15,1

6

-

0.47

-

-

Referen

cedata

20

88

88

88

88

88

FF

06

02

C0/

80

40

R-YN1

Demodulationangle1

E

59

86

103

120

deg

fec=feb+

50kHz

C0/

80

40

R-YN2

Demodulationangle2

E

59

73

90

107

deg

fec=feb+

50kHz

C0/

80

40

TC1

TINTcontrol

characteristic1

E

59

30

45

60

deg

feb=fec+

50kHz

F7

80

40

TC2

TINTcontrol

characteristic2

E

59

30

45

60

deg

feb=fec+

50kHz

00

80

40

Ffsc

fscoutputfrequency

38

SG.C

38

29

3.5

793

3.5

796

3.5

799

MHz

88

Vfsc

fscoutputamplitud

e1

C

29

1.4

2

2.6

Vpp

88

Ffscfree

fscoutputfrequency

infscfreemode

38

SG.C

29

3.5

790

3.5

795

3.5

810

MHz

88

20

Vfsc

fscoutputamplitud

e1

infscfreemode

38

SG.C

29

1.4

2

2.6

Vpp

88

20

Min.

Typ.

Max.

Symbol

Item

Inputsignal

Unit

Notes

Subaddress

Pin

7/30/2019 _m61250bfp

32/52

M61250BFP

Rev.1.0, Sep.23.2003, page 30 of 49

Test

point

Limits

SG

00H

01H

02H

03H

04H

05H

06H

07H

08H

09H

0AH0BH0CH0DH0EH0FH

10H

11H

12H13H

14H

15H

16H

17H

18H

19H

1AH1BH1CH

RGB

RGBtypicalconditions

-

-

-

-

-

-

-


40

adj02

00

20

40

80

40

40

00

80

40

40

80

80

80

24

20

001

0

00

00

88

40

00

00

00

00

00

VBLK

Outputblankingvo

ltage

38

38

38

38

38

SG.A

14,15,

16

0

0.1

0.3

V

88

00

GYtyp

Contrastcontrol

characteristic1

SG.B

14,15,

16

2.2

2.8

3.3

Vpp

f=100kH

z

88

88

00

00

00

GYmin

Contrastcontrol

characteristic2

SG.B

14,15,

16

-

200

300

mV

f=100kH

z

GYEnor

Contrastcontrol

characteristic3

SG.A

14,15,

16

2.2

2.8

3.3

V

Pin33=

2.9V

88

00

GYEmin

Contrastcontrol

characteristic4

SG.

38

SG.

38

SG.

38

SG.

38

SG.

38

SG.

38

SG.

38

SG.A

14,15,

16

-

100

200

mV

Pin33=

0.0V

88

00

GYEclip

Contrastcontrol

characteristic5

21,22,

23

SG.F

14,15,

16

0.50

0.65

0.80

V

Pin24=

2.5V

00

88

00

Lumnor

Brightnesscontrol

characteristic1

D

14,15,

16

1.7

2.1

2.5

V

Vy=0.0

V

88

00

Lummax

Brightnesscontrol

characteristic2

D

14,15,

16

2.3

3

-

V

Vy=0.0

V

88

00

FF

Lummin

Brightnesscontrol

characteristic3

D

14,15,

16

-

1.3

2

V

Vy=0.0

V

88

00

00

D(R)1

A

14

2.0

4.0

6.0

dB

88

00

00

7F

D(B)1

Rdrivingcontrol

characteristic1

Bdrivingcontrol

characteristic1

Rdrivingcontrol

characteristic2

Bdrivingcontrol

characteristic3

A

16

2.0

4.0

6.0

dB

88

00

00

7F

D(R)2

A

14

-5.0

-3.0

-1.0

dB

88

00

00

00

D(B)2

A

16

-5.0

-3.0

-1.0

dB

88

88

88

88

00

00

00

00

00

00

EXD1(R)

DigitalOSD(R)

I/Ocharacteristic1

23,24,

38

SG.F,

SG.A

14

1.0

1.5

2.0

Vpp

Vosd=1

.0V,SW23=ON

EXD1(G)

DigitalOSD(G)

I/Ocharacteristic1

22,24,

38

SG.F,

SG.A

15

1.0

1.5

2.0

Vpp

Vosd=1

.0V,SW22=ON

EXD1(B)

DigitalOSD(B)

I/Ocharacteristic1

21,24,

38

SG.F,

SG.A

16

1.0

1.5

2.0

Vpp

Vosd=1

.0V,SW21=ON

EXD2(R)

DigitalOSD(R)

I/Ocharacteristic2

23,24,

38

SG.F,

SG.A

14

200

300

400

mV

Vosd=

1.0V,SW23=ON

EXD2(R

)=Measuredvalue-EXD1(R)

88

00

20

EXD2(G)

DigitalOSD(G)

I/Ocharacteristic2

22,24,

38

SG.F,

SG.A

15

200

300

400

mV

Vosd=

1.0V,SW22=ON

EXD2(G

)=Measuredvalue-EXD1(G)

88

00

20

EXD2(B)

DigitalOSD(B)

I/Ocharacteristic2

21,24,

38

SG.F,

SG.A

16

200

300

400

mV

Vosd=

1.0V,SW21=ON

EXD2(B

)=Measuredvalue

-EXD1(B)

88

00

20

EXD1(R-

G)

DigitalOSD(R-G)

amplitudedifference

-

-

-

-350

0

350

mV

88

EXD1(G-

B)

DigitalOSD(G-B)

amplitudedifference

-

-

-

-350

0

350

mV

88

EXD1(B-

R)

DigitalOSD(B-R)

amplitudedifference

-

-

-

-350

0

350

mV

88

EXA(R)

AnalogOSD(R)

I/Ocharacteristic

23,24,

38

SG.F,

SG.A

14

1.2

2.1

3.0

Vpp

Vosd=0

.7V

40

88

00

10

EXA(G)

AnalogOSD(G)

I/Ocharacteristic

22,24,

38

SG.F,

SG.A

15

1.2

2.1

3.0

Vpp

Vosd=0

.7V

40

88

00

10

EXA(B)

AnalogOSD(B)

I/Ocharacteristic

21,24,

38

SG.F,

SG.A

16

1.2

2.1

3.0

Vpp

Vosd=0

.7V

40

88

00

10

Min.

Typ.

Max.

Symbol

Item

Inputsignal

Unit

Notes

Subaddress

Pin

7/30/2019 _m61250bfp

33/52

M61250BFP

Rev.1.0, Sep.23.2003, page 31 of 49

Test

point

Limits

SG

00H01H02H03H04H

05H06H07H08H09H0AH0BH0CH0DH0EH0FH10H11H12H13H14H15H16H17H18H19H1AH1BH1CH

EXA(R-G)

AnalogOSD(R-G)

amplitudedifference

_

_

_

-350

0

350

mV

88

10

EXA(G-B)

AnalogOSD(G-B)

amplitudedifference

_

_

_

-350

0

350

mV

88

10

EXA(B-R)

AnalogOSD(B-R)

amplitudedifference

Rcutoffcontrol

characteristic1

Gcutoffcontrol

characteristic1

Bcutoffcontrol

characteristic1

Rcutoffcontrol

characteristic2

Gcutoffcontrol

characteristic2

_

_

_

-350

0

350

mV

88

10

OFRG

Offsetvoltage(R-G

)

38

SG.D

14,15

-100

0

100

mV

Vy=0.0

V

88

00

OFBG

Offsetvoltage(B-G

)

38

SG.D

15,16

-100

0

100

mV

Vy=0.0

V

88

00

C(R)1

38

SG.D

14

2.6

2.9

3.2

V

Vy=0.0

V

88

00

FF

C(G)1

38

SG.D

15

2.6

2.9

3.2

V

Vy=0.0

V

88

00

FF

C(B)1

38

38

38

38

38

38

38

38

SG.

SG.

SG.

SG.

SG.

SG.

SG.D

16

2.6

2.9

3.2

V

Vy=0.0

V

88

00

FF

C(R)1

D

14

1.1

1.4

1.7

V

Vy=0.0

V

88

00

00

C(G)1

D

15

1.1

1.4

1.7

V

Vy=0.0

V

88

00

00

C(B)2

Bcutoffcontrol

characteristic2

D

16

1.1

1.4

1.7

V

Vy=0.0

V

88

00

00

Ccon1

Colorcontrol

characteristic1

C

14,15,

16

2

5

8

dB

80

88

7F

Ccon2

Colorcontrol

characteristic2

C

14,15,

16

-

-15

-10

dB

80

88

01

Ccon3

Colorcontrol

characteristic3

C

14,15,

16

-

-40

-35

dB

80

88

00

MTXRB

MatrixratioR/B

SG.G

38

SG.G

14,16

0.81

0.98

1.08

-

88

MTXGB

MatrixratioG/B

15,16

0.29

0.37

0.45

-

88

DOSD1

DigitalOSDswitch

ing

characteristic1

23,24,

38

SG.F,

SG.A

14

-

0.05

0.13

us

Vosd=1

.0V,SW23=ON

DOSD2

DigitalOSDswitch

ing

characteristic2

23,24,

38

SG.F,

SG.A

14

-

0.05

0.13

us

Vosd=1

.0V,SW23=ON

AOSD1

AnalogOSDswitching

characteristic1

23,24,

38

SG.F,

SG.A

14

-

0.05

0.13

us

Vosd=1

.0V

7F

88

10

AOSD2

AnalogOSDswitching

characteristic2

23,24,

38

SG.F,

SG.A

14

-

0.05

0.13

us

Vosd=1

.0V

7F

88

7F

88

7F

88

10

BB(R)

Bluebackground

function(R)

14

1.7

2.1

2.5

V

88

80

BB(G)

Bluebackground

function(G)

15

1.7

2.1

2.5

V

88

80

BB(B)

Bluebackground

function(B)

38

SG.A

16

2.7

3.7

4.7

V

88

80

WB

Whiterasterfunction

38

38

38

SG.A

SG.A

SG.A

14,15,

16

2.7

3.7

4.7

V

88

A0

Min.

Typ.

Max.

Symbol

Item

Inputsignal

Unit

Notes

Subaddress

Pin

7/30/2019 _m61250bfp

34/52

M61250BFP

Rev.1.0, Sep.23.2003, page 32 of 49

Test

point

Limits

SG

00H

01H

02H

03H

04H

05H

06H

07H

08H

09H

0AH0BH0CH0DH0EH0FH

10H

11H

12H13H

14H

15H

16H

17H

18H

19H

1AH1BH1CH

DEF

Deflectionsystem

typicalconditions

-

-

-

-

-

-

-


40

adj02

00

20

40

80

40

40

00

80

40

40

80

80

80

24

20

001

0

00

00

88

40

00

00

00

00

00

fH1

Horizontalfree-run

ning

frequency1

-

11

15.3

15.7

16.1

kHz

fH2

Horizontalfree-run

ning

frequency2

-

11

14.7

15.1

15.5

kHz

20

fH3

Horizontalfree-run

ning

frequency3

-

11

15.8

16.2

16.6

kHz

26

Hfree

Forcedhorizontal

free-runningopera

tion

38- - -

SG.A

11

15.3

15.7

16.1

kHz

88

9

0

FPHU

Horizontalpull-inrange

(upper)

38

SG.H

11

250

500

-

Hz

Variable

inputfrequency

88

FPHL

Horizontalpull-inrange

(lower)

38

38

38

SG.H

11

-

-500

-250

Hz

Variable

inputfrequency

88

HPT1

Horizontalpulsetiming1

SG.A

11

12.0

13.5

15.0

s

88

80

80

HPT2

Horizontalpulsetiming2

SG.A

11

2.5

4.0

5.5

s

88

80

9F

HPTW

Horizontalpulsew

idth

-

-

11

21

25

29

s

VH

Horizontalpulse

amplitude

-

-

11

4.7

5.4

-

V

HSTA

Horizontalpulsestart

operation

-

-

11

-

0.0

0.5

V

00

AFCG

AFCgainoperation

38

SG.A

7

2.0

3.0

10.0

dB

88

80

fV

Verticalfree-runnin

g

frequency

-

-

5

55

60

65

Hz

Vfree

Forcedvertical

free-runningopera

tion

38

SG.A

5

55

60

65

Hz

88

64

SVC

Servicemodeoperation

-

-

5

1.0

1.5

2

V

1

8

FPVU

Verticalpull-infreq

uency

(upper)

38

SG.H

5

63

67

-

Hz

Variable

inputfrequency

88

FPVL

Verticalpull-infreq

uency

(lower)

38

SG.H

5

-

55

57

Hz

Variable

inputfrequency

88

VRsi1

Verticalrampsize

38

SG.A

5

1.6

2.0

2.4

Vpp

88

VRsc1

Verticalrampsize

controlrange1

38

SG.A

5

2.0

2.4

2.8

Vpp

88

30

VRsc2

Verticalrampsize

controlrange2

38

38

38

SG.A

5

0.8

1.2

1.6

Vpp

88

00

VRpo1

Verticalrampposition

controlrange1

SG.A

5

18

38

58

s

88

88

VRpo2

Verticalrampposition

controlrange2

SG.A

5

840

860

880

s

Measuredvalue-VRpo1

1

7

Min.

Typ.

Max.

Symbol

Item

Inputsignal

Unit

Notes

Subaddress

Pin

7/30/2019 _m61250bfp

35/52

M61250BFP

Rev.1.0, Sep.23.2003, page 33 of 49

Test

point

Limits

SG

00H

01H

02H

03H

04H

05H

06H

07H

08H

09H

0AH0BH0CH0DH0EH0FH

10H

11H

12H13H

14H

15H

16H

17H

18H

19H

1AH1BH1CH

VW

Verticalpulsewidth

38

SG.A

20

0.35

0.53

0.65

ms

88

VBLKW

Verticalblankingw

idth

38

SG.A

14,15,

16

1.32

1.47

1.62

ms

88

00

VBLKW

VS1

Verticalblankingw

idth

VSHIFT1

38

SG.A

14,15,

16

1.35

1.50

1.65

ms

88

00

08

VBLKW

VS2

Verticalblankingw

idth

VSHIFT2

38

SG.A

14,15,

16

1.73

1.88

2.03

ms

88

00

0C

VBLKW

VS3

Verticalblankingw

idth

VSHIFT3

38

SG.A

14,15,

16

2.11

2.26

2.41

ms

88

00

0F

WVSS

Verticalblankingw

idth

38

SG.I

5

14

-

-

us

Variable

inputsignalduty

88

MONIT

ORING

Intelligentmonitor

systemtypicalcon

ditions

-

-

-

-

-

-

-


40

adj02

00

20

40

80

40

40

00

80

40

40

80

80

80

24

20

001

0

00

00

88

40

00

00

00

00

00

MONI1

Intelligentmonitor

1

(compositesync)

41

SG.A

18

4.0

4.9

5.0

Vpp

Note:This

LSIcannotoperatecorrectly

ifMONI1isusedwhiletheH-freebusbit(13H-D7)issetto1.

00

MONI2

Intelligentmonitor

2

(AFT)

63,64

SG.7

18

2.0

2.5

3.0

V

10

MONI3-1

Intelligentmonitor

3-1

(RFAGC1)

-

-

18

4.0

4.3

4.6

V

20

MONI3-2

Intelligentmonitor

3-2

(RFAGC2)

63,64

SG.7

18

0.88

0.93

0.98

-

Pin18v

oltage/pin59voltage

AtRFA

GCvoltagehigh

20

MONI6

Intelligentmonitor

6

(videoSWoutput)

41

SG.A

18

0.76

0.95

1.24

Vpp

50

MONI7

Intelligentmonitor

7

(Gout)

41

SG.A

18

1.5

2.0

2.5

Vpp

Amplitudemeasuredfromblankinglevel

00

60

MONI8

Intelligentmonitor

8

(Rout)

41

SG.A

18

1.5

2.0

2.5

Vpp


00

70

MONI9

Intelligentmonitor

9

(Bout)

41

SG.A

18

1.5

2.0

2.5

Vpp


00

80

MONI10

Intelligentmonitor

10

(ACL)

-

-

18

3.5

4.0

4.5

V

90

MONI11

Intelligentmonitor

11

(Vsync)

41

SG.A

18

3.5

4.0

4.5

Vpp

A0

MONI12

Intelligentmonitor

12

(Hout)

41

SG.A

18

3.6

4.0

4.4

Vpp

B0

MONI13

Intelligentmonitor

13

(VIFVcc)

-

-

18

2.30

2.50

2.70

V

C0

MONI14

Intelligentmonitor

14

(Start-upVcc)

-

-

18

2.55

2.70

2.85

V

D0

MONI15

Intelligentmonitor

15

(video/chromaVcc

)

-

-

18

2.30

2.50

2.70

V

E0

MONI16

Intelligentmonitor

16

(HiVcc)

-

-

18

2.55

2.70

2.85

V

F0

MONI1-C

IntelligentmonitorI-C

(SyncratioatHfreem

ode)

41

SG.A

18

50

100

-

%

InputSYNCratiomeasuredatHfreemode

009

0

Min.

Typ.

Max.

Symbol

Item

Inputsignal

Unit

Notes

Subaddress

Pin

7/30/2019 _m61250bfp

36/52

M61250BFP

Rev.1.0, Sep.23.2003, page 34 of 49

Method of Measurement of Electrical Characteristics

VIF block

P/N: Video S/N

1. Input SG3, and measure the rms value (noise value) for the signal output from pin 58.

2. The P/N is defined as follows.

P/N = 20 log V0 measured value (Vp-p) x 103

x 0.7Noise measured value (mVrms) (dB)

Vf: Video frequency characteristic

1. Input SG4, and adjust the f2 frequency so that the 1 MHz beat component is output to pin 58.

2. Adjust the voltage applied to pin 62 so that the 1 MHz beat component at pin 62 is 100 dB.

3. Gradually reduce the f2 frequency, and measure the frequency at which the beat component is 3 dB lower than the

level at 1 MHz.

Vin min: Input sensitivity

1. Lower the level of SG5 so that the input level is 3 dB lower than the value measured under video-detection-wave

output for the V0 item.

Vin max: Maximum allowable input

1. Input SG6 at 90 dB.

2. The output level of Pin 58 at this point should be VA. Increase the amplitude of SG6 so that the input level indicates

an output level for Pin 58 that is 3 dB lower than VA.

AFT: AFT detection sensitivity

V2H: AFT maximum voltage

V2L: AFT minimum voltage

AFT is defined as follows.

AFT = (3.0 - 10.) x 103

mV

df KHz (mV/KHz)

7/30/2019 _m61250bfp

37/52

M61250BFP

Rev.1.0, Sep.23.2003, page 35 of 49

IM: Inter-modulation

1. Input SG13 to Pins 63 and 64.

2. Measure the 0.92 MHz component and 3.58 MHz component of the pin 58 output.

3. IM is defined as follows.

IM = 20 log 0.92 MHz component

3.58 MHz component (dB)

DLPH: RF AGC delay maximum point DLPL: RF AGC delay minimum point

1. Input SG5 to pins 63 and 64.

2. Change the amplitude of SG5 and measure the level at which the voltage of pin 59 is 2.5 V.

SIF block

LIM: Input limiting sensitivity

Gradually decrease the input level of SG17, and measure the input level at the point when the 400 Hz component of

Pin 58 is 3 dB lower than VoAF.

AMR: AMR

1. Measure the 400 Hz component for Pin 54 and set it as Vam.

2. AMR is defined as follows.

AMR = 20 log VoAF (mVrms)

Vam (mVrms) (dB)

AFSN: AF S/N

1. Measure the noise (20 Hz to 100 kHz) of the Pin 51 output.

2. AF S/N is defined as follows.

AF S/N = 20 log VoAF max

Measured value (dB)

Video clock

2AGTV: Video SW output level (TV input) 2AGEV: Video SW output level (External input)

1. Input SG.A to pin 41 (2AGTV) or pin 38 (2AGEV).

2. The amplitude (p-p) at pin 31 is measured.

*In order to select TV or external input, use the subaddress 06H.

Ymax: Maximum video output

1. Input SG.A to pin 38.

2. Measure the amplitude (p-p) other than the blanking part of the output of pins 14, 15, 16.

7/30/2019 _m61250bfp

38/52

M61250BFP

Rev.1.0, Sep.23.2003, page 36 of 49

FBY: Video frequency characteristic

1. Input SG.B (5 MHz, 0.4 Vp-p) to pin 38.

2. Measure the amplitude (p-p) other than the blanking part of the output of pins 14, 15, 16, take the result tobe YB.

3. FYB is defined as follows.

FYB = 20 log YB (Vp-p)

GY (Vp-p) (dB)

CRF1: Chroma trap attenuation 1 (normal R/G/B output)

TRF maximum chroma trap attenuation

1. Input SG.C to pin 38, measure the 3.58 MHz frequency level with TRAP ON/OFF (02H D4) DATA 1, take this to

be N0.

2. Also measure the level with TRAP ON/OFF (02H D4) DATA 0.

3. CRF1 is defined as follows.

CRF1 = 20 log Measured value (mVp-p)

N0 (mVp-p) (dB)

4. Take the minimum value of CRF1 when the I2C BUS data of the TRAP fine ADJ (12H D0/D1) is adjusted to be

TRF.

YDL1: YDL time 1


2. Measure the delay time relative to the input signal of pins 14, 15, 16.

The delay time at 50% rise level is measured.

YDL2, 3, 4: YDL time 2, 3, 4


2. Measure the delay time of the input signal and the pin 14, 15, 16 output signals.

3. YDL2, YDL3, YDL4 are defined as follows.

YDL2 = measured value (ns) - YDL1 (measured value)



GTmax: Video tone control characteristic 2

1. Input SG.B (f = 2.5 MHz) to pin 38.

2. The output amplitude of pins 14, 15, 16 when the video tone data is at the center (20 H) is taken to be GTnor.

3. The output amplitude of pins 14, 15, 16 when the video tone data is maximum is measured.

4. GTmax is defined as follows.

GTmax = 20 log Measured value (Vp-p)

GTnor (mVp-p) (dB)

7/30/2019 _m61250bfp

39/52

M61250BFP

Rev.1.0, Sep.23.2003, page 37 of 49

GTmin: video tone control characteristic 3

1. Input SG.B (f=2.5 MHz) to pin 38.

2. The output amplitude of pins 14, 15, 16 when the video tone data is at the center (20 H) is taken to be GTnor.

3. The output amplitude of pins 14, 15, 16 when the video tone data is minimum is measured.

4. GTmin is defined as follows.

GTmin = 20 log Measured value (Vp-p)

GTnor (mVp-p) (dB)

GT2M: Video tone control characteristic 4

1. Take pin 14, 15, 16 output amplitude when input signal frequency is 2.5 MHz to be GTnor.

2. Input SG.B (f = 2 MHz) to pin 38.

3. Measure pin 14, 15, 16 output amplitude.

4. GT2M is defined as follows.

GT2M = 20 log Measured value (Vp-p)

GTnor (mVp-p) (dB)

GT5M: Video tone control characteristic 5

1. Take pin 14, 15, 16 output amplitude when input signal frequency is 2.5 MHz to be GTnor.

2. Input SG.B (f = 2 MHz) to pin 38.

3. Measure pin 14, 15, 16 output amplitude.

4. GT5M is defined as follows.

GT5M = 20 log Measured value (Vp-p)

GTnor (mVp-p) (dB)

BLS: black stretch characteristic

1. Input SG.K to pin 38.

2. With black stretch off (02H D1 = 1), adjust the contrast (05H) and brightness (0AH), and set the pin 14, 15, 16

output level of the first stage (lowest stage) to 2.0 V, and the output level of the eighth stage (highest stage) to 4.6

V.

3. Change black stretch to on (02H D1 = 0), and measure the pin 14, 15, 16 first stage output level.

4. BLS is defined as follows.BLS = 2.0 - measured value (V)

VMF: Video mute function


2. With the mute switch (02H D7) on "VMFon", off "VMFoff", measure the output amplitude.

3. VMF is defined as follows.

VMF = 20 log VMFon (Vp-p)

VMFoff (Vp-p) (dB)

7/30/2019 _m61250bfp

40/52

M61250BFP

Rev.1.0, Sep.23.2003, page 38 of 49

Chroma block

CnorR: Chroma typical output (R-Y)

CnorB: Chroma typical output (B-Y)

1. Input SG.C to pin 38.

2. When "test mode" I2C data is 18H D6=1, 18H D7=1 and 19H D6=1 and when "test mode" I2C data is 18HD6=0, 18H D7=1 and 19H D6=1, take the pin 59 output amplitude to be the chroma typical output (R-Y)and chroma typical output (B-Y), respectively.

ACC1: ACC characteristic 1

1. Input SG.E (eb=570 mV: level + 6 dB) to pin 38.

2. Measure the pin 59 output amplitude.

3. ACC1 is defined as follows.

ACC1 = 20 log measured value (mVp-p)

chroma typical output 1 (mVp-p) (dB)

ACC2: ACC characteristic 2

1. Input SG.E (input level: -18 dB) to pin 38.


3. ACC2 is defined as follows.

ACC2 = 20 log measured value (mVp-p)


OV: Chroma overload characteristic

1. Input SG.E (eb=800 mVp-p) to pin 38.


3. OV is defined as follows.

OV = 20 log measured value (mVp-p)


VikN: Killer operation input level1. Input SG.E (variable level) at input level 0 dB to pin 38.

2. While monitoring the pin 59 output amplitude, lower the input level, and measure the input level when the output

amplitude vanishes.

KillP: Hue remaining with killer

1. Input SG.E (level: -40 dB) to pin 38.


APCU: APC pull-in range (upper)

APCL: APC pull-in range (lower)

1. Input SG.E (feb-fec-3.579545 MHz) to pin 38.

2. After raising the frequency until the output from pin 59 vanishes, lower the frequency, and take the point at whichan output appears to be fu.

3. After lowering the frequency until the output from pin 59 vanishes, raise the frequency, and take thepoint at which an output appears to be fl.

4. APCU and APCL are defined as follows.APCU = fu 3579545 Hz

APCL = fl 3579545 Hz

7/30/2019 _m61250bfp

41/52

M61250BFP

Rev.1.0, Sep.23.2003, page 39 of 49

R/BN: Demodulation ratio R-Y/B-Y

1. Input SG.E (eb = single chroma = ec + 50 kHz) to pin 38.

2. Take the pin 59 output amplitude when "test mode" I2C data is 18H D6=1, D7=1 to be VRY.

3. Take the pin 59 output amplitude when "test mode" I2C data is 18H D6=0, D7=1 to be VBY.

4. R/BN is defined as follows.

R/BN = VRY (mVp-p)

VBY (Vp-p) (dB)

R/BU, G/BU: Demodulation ratio

R/BJ, G/BJ: Demodulation ratio

1. Input SG.J to pin 38.

2. Take the pins 14, 15, 16 output amplitude when video mute on ( 02H D7 = 1, D7 = 1) and US mode (15H D3 = 1)

are specified to be URY, UGY, and UBY, respectively.

3. Take the pins 14, 15, 16 output amplitude when video mute on ( 02H D7 = 1, D7 = 1) and JPN mode (15H D1 = 1,

D2=1) are specified to be JRY, JGY, and JBY, respectively.

4. R/BU, G/BU, R/BJ, and G/BJ are defined as follows.

R-YN: Demodulation angle

1. Input SG.E (eb = single chroma = ec + 5 kHz) to pin 38.

2. Take the pin 59 output amplitude when "test mode" I2C data is 18H D6=1, D7=1 to be VRY.

3. Take the pin 59 output amplitude when "test mode" I2C data is 18H D6=0, D7=1 to be VBY.

4. R/YN is defined as follows.

*The vector is determined taking the demodulator gain into account.

TC1: TINT control characteristic 1

TC2: TINT control characteristic 2

1. Input SG.C (see figure below) to pin 38. Measure the absolute angle with reference to the pin 59 output voltage,

referring to the figure below.

2. Take the TINT data center part (07H data 40H) to be reference angle "TC", determine the TINT DATA maximum

and minimum values. TC1 and TC2 are defined as follows.

TC = TCmax TC(deg)

TC = TC TCmin (deg)

7/30/2019 _m61250bfp

42/52

M61250BFP

Rev.1.0, Sep.23.2003, page 40 of 49

RGB interface block

VBKL: Output blanking voltage


2. Measure the voltage of the pin 14, 15, 16 pedestal and blanking parts.

GYmax: Contrast control characteristic 1

GYmin: Contrast control characteristic 2

1. Input SG.B (f=100 kHz) to pin 38.

2. Measure the pin 14, 15, 16 output amplitude.

GYEnor: Contrast control characteristic 3

GYEmin: Contrast control characteristic 4

1. Input SG.A to pin 38.2. Measure the pin 14, 15, 16 output amplitude when applying 2.9 V and 0 V to pin 33.

GYEclip: Contrast control characteristic 5

1. Input SG.F to pins 21, 22, 23, 24.

2. Minimize the contrast control data, and measure the output amplitude at and above the pedestal part of pins 14, 15,

16.

The amplitude of the blanking part is not measured.

Lum nor: Brightness control characteristic 1

Lum max: Brightness control characteristic 2

Lum min: Brightness control characteristic 3

1. Input SG.D (Vy=0 V) to pin 38.2. Measure the DC voltage other than the blanking part of the output of pins 14, 15, 16.

D(R)1: R drive control characteristic 1


2. Measure the pin 14 output amplitude when the drive control data is at center and is maximum, take theresults to be DRnor and DRmax respectively.

3. D(R)1 is defined as follows.

D(B)1: B drive control characteristic 1


2. Measure the pin 16 output amplitude when the drive control data is at center and is maximum, take the results to be

DBnor and DBmax respectively.

3. D(B)1 is defined as follows.

7/30/2019 _m61250bfp

43/52

M61250BFP

Rev.1.0, Sep.23.2003, page 41 of 49

D(R)2: R drive control characteristic 2


2. Measure the pin 14 output amplitude when the drive control data is at center and is minimum, take the results to be

DRnor and DRmin respectively.

3. D(R)2 is defined as follows.

D(B)2: R drive control characteristic 2


2. Measure the pin 16 output amplitude when the drive control data is at center and is minimum, take the results to be

DBnor and DBmin respectively.

3. D(B)2 is defined as follows.

EXD(R): Digital OSD(R) input/output characteristic

EXD(G): Digital OSD(G) input/output characteristic

EXD(B): Digital OSD(B) input/output characteristic

1. Input SG.F (Vosd=1.0 V) to pins 21, 22, 23, 14.

2. Measure the output amplitude at and above the pedestal part in pins 14, 15, 16. The amplitude of the blanking part

is not measured.

EXD(R-G): Digital OSD (R-G) amplitude difference

EXD(G-B): Digital OSD (G-B) amplitude difference

EXD(B-R): Digital OSD (B-R) amplitude difference

1. EXD(R-G), EXD(G-B) and EXD(B-R) are defined as follows.

EXD(RG) = EXD(R)EXD(G)

EXD(GB) = EXD(G)EXD(B)

EXD(BR) = EXD(B)EXD(R)

7/30/2019 _m61250bfp

44/52

M61250BFP

Rev.1.0, Sep.23.2003, page 42 of 49

EXA(R): Analog OSD(R) input/output characteristic

EXA(G): Analog OSD(G) input/output characteristic

EXA(B): Analog OSD(B) input/output characteristic


2. Measure the output amplitude at and above the pedestal part in pins 14, 15, 16. The amplitude of the blanking part

is not measured.

EXA(R-G): Analog OSD (R-G) amplitude difference

EXA(G-B): Analog OSD (G-B) amplitude difference

EXA(B-R): Analog OSD (B-R) amplitude difference

1. EXA(R-G), EXA(G-B) and EXA(B-R) are defined as follows.

EXA(RG) = EXA(R)EXA(G)

EXA(GB) = EXA(G)EXA(B)

EXA(BR) = EXA(B)EXA(R)

C(R)1: R cutoff characteristic 1

C(G)1: G cutoff characteristic 1

C(B)1: B cutoff characteristic 1

C(R)2: R cutoff characteristic 2

C(G)2: G cutoff characteristic 2

C(B)2: B cutoff characteristic 2

1. Input SG.D (Vy=0 V) to pin 38.

2. Measure the DC voltage of other than the blanking part in the outputs of pins 14, 15, 16.

Ccon1: color control characteristic 1



1. Input SG.C to pin 38.

2. Measure the output amplitudes of pins 14, 15, 16 when IIC DATA 08H=40h, take this to be Ccon0.

3. Measure the output amplitudes of pins 14, 15, 16 under each set of conditions.

4. Ccon1, Ccon2, Ccon3 are defined as follows.

Ccon1, Ccon2, Ccon3 = 20 log measured value (Vp-p)

Ccon0 (Vp-p) (dB)

7/30/2019 _m61250bfp

45/52

M61250BFP

Rev.1.0, Sep.23.2003, page 43 of 49

MTXRB: Matrix ratio R/B

MTXGB: Matrix ratio G/B

1. Input SG.G (rainbow color bar) to pin 38.

2. Measure the output amplitude when pins 14, 15, 16 are respectively VR, VG, VB.

3. MTXRB, MTXGB are defined as follows.

DOSD1: Digital OSD switching characteristic 1

DOSD2: Digital OSD switching characteristic 2


2. Measure the rise time and fall time of the output signals of pins 14, 15, 16 at and above pedestal level. The blanking

part is not measured.

AOSD1: Analog OSD switching characteristic 1

AOSD2: Analog OSD switching characteristic 2


2. Measure the rise time and fall time of the output signals of pins 14, 15, 16 at and above pedestal level. The blanking

part is not measured.

BB(R): Blue back function (R)

BB(G): Blue back function (G)

BB(B): Blue back function (B)

1. Input SG.A to pin 38.2. Measure the output amplitude (p-p) of pins 14, 15, 16 other than the blanking part.

7/30/2019 _m61250bfp

46/52

M61250BFP

Rev.1.0, Sep.23.2003, page 44 of 49

WB: White raster function


2. Measure the output amplitude (p-p) of pins 14, 15, 16 other than the blanking part.

Deflection block

fH1: Horizontal free-running frequency 1



Measure the frequency of pin 11 with no input.

Hfree: Forced horizontal free-running operation


2. Set H-FREE CONTROL DATA to on, measure the frequency at pin 11.

FPHU: Horizontal pull-in range (upper)

FPHL: Horizontal pull-in range (lower)

1. Input SG.H to pin 38.

2. Change the frequency of SG.H, measure the frequency range for which the pin 11 output signal and pin 38 input

signal are pulled in, with respect to the video signal horizontal frequency.

HPT1: Horizontal pulse timing 1

HPT2: Horizontal pulse timing 2

1. Measure the horizontal pulse timing using the method for HPT1.

2. Typical

HPT2 = (measured value) - HPT1

HPTW: Horizontal pulse width

VH: Horizontal pulse amplitude

7/30/2019 _m61250bfp

47/52

M61250BFP

Rev.1.0, Sep.23.2003, page 45 of 49

HSTA: Horizontal pulse stop operation

Confirm that when H.START SW OFF (0FH:D7=0), the horizontal output goes low.

AFCG: AFC gain operation

1. Measure the pin 7 output amplitude during AFC switching, taking the result during SW ON to be AFCon, and

during SW OFF to be AFCoff.

2. AFCG is defined as follows.

fV: Vertical free-running frequency

Measure the pin 5 output frequency with no input.

Vfree: Forced vertical free-running operation


2. Set V-FREE CONTROL DATA to on, measure the pin 5 output amplitude.

SCV: Service mode operation

Measure the pin 5 output DC voltage with the service switch on.

FPVU: Vertical pull-in frequency (upper)

FVPL: Vertical pull-in frequency (lower)

Change the SG.H vertical frequency, and measure the frequency when the pin 5 output waveform is pulled in.

VRsi: Vertical ramp size

VRsc1: Vertical ramp size control range 1

VRsc2: Vertical ramp size control range 2

VRpo1: Vertical ramp position control range 1

VRpo2: Vertical ramp position control range 2

1. Measure the vertical ramp timing using the same method as for VRpo1.

2. VRpo2 is defined as follows.

VRpo2 = (measured value) VRpo1

7/30/2019 _m61250bfp

48/52

M61250BFP

Rev.1.0, Sep.23.2003, page 46 of 49

VW: Vertical pulse width

VBLKW: Vertical BLK width