PROTECTION TYPE/THREAT LEVEL:

❑ Special (Rifle/Super Multi-Hit)

CONFIGURATION:

❑ Stand-Alone ❑ ICW (In Conjunction With)

CONSTRUCTION:

PROTECTIVE COVERS AVAILABLE:

❑ Polyurea ❑ Cordura w/ Welded Seams

HIT RATING:

❑ Single ❑ Multi

✓

✓

✓

✓

❑ Polyethylene ❑ Alloy

M16 SERIESThe DKX M16 Series ballistic plates provide a low cost, special threat solution for the M80 ball and the 7.62x39 MSC. The M16 Series utilizes a flat, ultra-durable alloy construction that provides superior multi-hit capability at a thickness of just 0.25”. A curved version is offered as the M17 Series.

MODEL #:

❑ D1841

TESTING CERTIFICATION/STANDARD:

❑ NIJ 0101.061 ❑ Special Threat Tested*

SPECIAL THREATS:

SERIES SPECIFICATIONS

✓✓

✓

✓

DKX ADVANCED MANUFACTURING, INC.Phone: 1-800-606-8317 | Fax: 1-352-672-6922 www.dkxarmor.com

LIT: DKX-M16-021516

❑ 7.62mm x 39mm 123gr PS Ball (Mild Steel Core)

❑ 7.62mm x 51mm 147gr M80 FMJ❑ Ceramic/Polyethylene ❑ Ceramic/Composite ✓

1: If l isted as NIJ cert if ied, only sizes greater than the 7”x8” side plate may be considered compliant to the NIJ Standard-0101.06. Al l s ide plates equal to or less than 7”x8” are Independently Tested to the above standards.

*Special Threat Testing conducted in accordance with an abbreviated and modified NIJ Standard 0101.06 / NIJ 0115.00.

M16 SERIES

DKX ADVANCED MANUFACTURING, INC.Phone: 1-800-606-8317 | Fax: 1-352-672-6922 www.dkxarmor.com

MADE WITH PRIDEIN THE USA

Department of State ITAR / Department of Commerce EAR:This data sheet is for an EXPORT CONTROLLED PRODUCT. The export of these products and technical information related to these products is governed by the U.S. Department of State International Traff ic in Arms Regulations (ITAR) and/or the Department of Commerce Export Administration Regulations (EAR). Non-Sales Technical Data related to these products must not be transmitted to a foreign person/entity without proper authorization of the U.S. Government. Violations may result in administrative, civi l , or cr iminal penalt ies. ITAR/EAR Export Licenses and/or ITAR/EAR Brokering Licenses (as appropriate) wil l be required prior to submittal of any further technical information and/or shipment of samples and/or products.

LIT: DKX-M16-021516

1. Al l s ize dimensions are ± 0.375”2. Al l thickness dimensions are ± 0.125”3. Al l weights are ± 4% or 0.50 lbs., whichever is greater

SHAPE SIZE1 (IN) THICKNESS2 (IN) WEIGHT3 (LBS) CURVATURE PRODUCT CODE

Full Size 6 x 6 0.25 2.14 Flat DKX-M16-66-FSFull Size 6 x 8 0.25 2.93 Flat DKX-M16-68-FSFull Size 7 x 8 0.25 3.42 Flat DKX-M16-78-FS

Full Size 8 x 10 0.25 4.83 Flat DKX-M16-810-FS

Full Size 10 x 12 0.25 7.34 Flat DKX-M16-1012-FSSAPI/ESAPI 7.25 x 11.50 0.25 4.76 Flat DKX-M16-XS-SESAPI/ESAPI 8 x 10 0.25 4.49 Flat DKX-M16-810-SESAPI/ESAPI 8.75 x 11.75 0.25 5.85 Flat DKX-M16-SM-SESAPI/ESAPI 9.50 x 12.50 0.25 6.84 Flat DKX-M16-MD-SESAPI/ESAPI 10 x 12 0.25 6.45 Flat DKX-M16-1012-SESAPI/ESAPI 10.25 x 13.25 0.25 7.80 Flat DKX-M16-LG-SESAPI/ESAPI 11 x 14 0.25 8.74 Flat DKX-M16-XL-SE

Shooter 8 x 10 0.25 4.12 Flat DKX-M16-810-SHShooter 10 x 12 0.25 6.34 Flat DKX-M16-1012-SH

PRODUCT SPECIFICATIONS

FULL SIZE SAPI/ESAPI SHOOTER