Lumina Roller Blinds Innovative solar powered cassette single & dual roller blinds

Solar roller blinds Solar powered retrofit roller blinds

Solar Curtain Track Elegant and performance

 

 

 

Rated power up to 10W

Charging current ≤180mA

Max running time 2 minutes

Max width 3.0m

Max drop 3.0m

Max blind load 5.0Kg

Operating temperature 0 – 40˚C

Operating humidity ≤80% RH

Lumina™ seriesCassette integrated roller blinds

Key features

• Solar powered, no wires!• Simple installation• Child safe with no looped cords• Quiet movement• Available in dual blind system• SmarTUG™ chain operation• Optional RF remote control• 3 intermediate stop positions• Compact and elegant design• Minimal light gap design• Range of fabrics to choose• 5 year warranty• Made in Australia

THE FIRST EVER MOTORISED ROLLER BLIND SYSTEM WITH FULLY INTEGRATED PV ARRAY

Powered by the most abundant energy source available to man, the sun, Lumina™ blinds by Dynaveil offer unprecedented practicality and ease of use for motorisation. With over 10 years of continued product development and extensive real world applications around the globe, Dynaveil is bringing this unique solution to the Australian market. Lumina™ is engineered for reliability and is suitable for both residential and commercial applications. Lumina™ is available in single and dual blind configurations:

Lumina™ blinds work by storing the energy harvested from natural daylight throughout the day and storing it internally with a high perfor-mance rechargeable battery. Direct sun exposure is not required to be able to sufficiently charge this internal battery - contact your Dynaveil representative for specific use case recommendations.

Specifications:

Lumina™Profile: 70*71mm

Lumina™ DuoProfile: 87*120mm

     

2  

Lumina Roller Blinds- Solar Automated

Headbox Specifications

Single – 72mm wide x 75mm drop. Ideal reveal depth required 100mm to house headbox with solar panel attached. Minimum reveal depth required of 50mm

Duo – 87mm wide x 120mm drop. Ideal reveal depth required 120mm to house headbox with solar panel attached. Minimum reveal depth required of 60mm.

Installation Requirements

Recess Fit – blind installed into click brackets at top of window recess. Headbox has solar panel attached to back of headbox as standard.

Face Fit – blind requires additional “L” brackets to be mounted onto face of architrave. Depending on architrave size, headbox will either have solar panel attached to back of headbox as standard, or can be mounted independently on the glass with extended wire to run from headbox to solar panel.

Ceiling Fit – blind installed into click brackets into plaster. Headbox will come without solar panel attached; this will be mounted independently on the glass with extended wire to run from headbox to solar panel.

Single Roller Cassette   Dual Roller Cassette  

 

Solar panel

Smart TUG 

     

3  

Blind Drop Specifications

Lumina roller blinds are made in format of cassette. The maximum drop of a Lumina roller blind system can be restricted by the limited space inside the cassette. Below table is the guidance of maximum drop can be achieved with various thicknesses of fabrics.

fabric thickness (mm) 0.50 0.75 1.00

single roller cassette 4.5m 2.9m 2.0m

dual roller cassette 2.5m 1.7m 1.1m

Three forms of Dynaveil Lumina roller blinds

1. The value range 2. The standard Lumina with options for over 10 groups of fabrics 3. Cassette only, with no fabric attached

Dealer’s prices:

The value range

width(m): 0.61 0.76 0.91 1.06 1.21 1.36 1.51 1.66 1.81 1.96 2.11

Single roller cassette 211 221 230 276 286 295 305 337 346 356 365

Dual roller cassette 372 385 399 484 498 512 525 581 595 608 622

The value range is referring to the cassette made up with selected fabrics allowing us to offer good value in products but competitive in pricing and short turn-around time. Maximum width for the value range is 2.0m, and all to be built with the same drop 2.3m at this stage.

Sample fabric book for the value range is available upon request. 

     

4  

Standard Lumina Cassettes

The standard cassettes are made up by R28 solar motors and common fabrics that are available in the market from budget group up to group 10. The prices can therefore be established as below:

Roller cassette indicative prices

Use 2.1m as typical drop for the indicatives below.

width (m) 0.61 0.91 1.21 1.51 1.81 2.11 2.41 2.71 3.01

Single roller

cassette

budget 259 290 322 356 393 430 470 511 554

group 1 264 296 329 364 401 440 480 523 567

group 2 273 308 345 384 425 468 513 560 609

group 3 286 323 364 407 453 502 554 608 665

group 4 299 342 388 436 488 542 599 658 721

Dual roller

cassette

budget 467 517 571 629 689 754 822 893 968

group 1 477 529 585 644 707 773 843 916 993

group 2 496 555 617 684 755 830 909 991 1078

group 3 521 585 655 730 811 898 990 1087 1190

group 4 547 622 702 788 880 977 1079 1187 1301

Cassette-Only

The single roller cassette can be supplied as in cassette-only format for those who want to add on fabric by themselves. Adding on fabrics to duo cassette is not as easy, and it is not encouraged. Only fully trained clients may possibly made the duo cassette roller blinds.

Cassette-only indicative prices

width(m) 0.61 0.91 1.21 1.51 1.81 2.11 2.41 2.71 3.01

single 199 220 241 262 283 304 325 346 367

duo 347 378 409 440 470 501 532 563 594

     

5  

Installation

Fully assembled final products for easy installation on job site.

To mount mounting brackets on to window frame

The mounting brackets are to be fixed to the window frame by wood screws. To determine where the screws should be positioned, please follow the guides here:

1. Viewing from front, as a guide, the centre of the bracket or the crews can be about 10cm from the end of system although brackets can be anywhere over the span of the cassette.

Mounting bracket 

Fully assembled roller system 

 

About 10cm  About 10cm 

Mounting 

brackets 

Fixing screws 

     

6  

2. Viewing from sides, if it is a single system, give no less than 4.5cm to the front; if it is a dual system, give no less than 6.0cm to the front. Make sure there is a minimum 4.5cm space at the back in all circumstances.

Mark the positions on window frame according to above guides; fix the mounting bracket to window frame with screws.

Fix the brackets to the 

window frame with the 

screws 

 

 

4.5cm for single 

system; 6.0cm for 

dual system. 

Front 

Glass 

Glass frame 

No less than 4.5cm 

Fixing screw Mounting 

bracket 

Window 

Rated power ~10W

Charging current ≤180mA

Max running time 2 minutes

Max blind load 5.0Kg

Nominal speed 25RPM

Operating temperature 0 – 40˚C

Operating humidity ≤80% RHInput voltage 5-9V DC

Hamstr™ RS28High performance DC motor with internalLi-ion rechargeable battery

Key features

• No electrician needed• Designed for PV applications• Electronic limits• 3 intermediate stop positions• Simplified programming• Low noise operation• Adaptable to 3rd party systems• Integrated RF receiver• Dry contact control integration• SmarTUG™ chain operation• Advanced energy management• Memory loss prevention• Ultra-durable internal battery• Over-discharge protection• 5 year warranty

ELECTRONIC LIMIT DC TUBULAR MOTOR DE-SIGNED FOR PV POWERED APPLICATIONS

The RS28 is a high performance Ø28mm diameter DC tubular motor with integrated rechargeable battery and advanced power manage-ment technologies. It is specially designed for PV or low power trickle charge applications and incorporates many innovations to ensure robust operation for the life of the product. The ability to be connected directly to a PV (solar) power source enables the RS28 to be an ideal solution for retrofit scenarios and other applications where hardwiring is either infeasible or undesirable.

Combined with the MPV01 modular PV array, systems built with the RS28 motor are highly adaptable to site requirements. The MPV01 can be cut to any desired length to best optimise energy harvesting perfor-mance as well as aesthetics.

Specifications:

RS28 motor with adaptors and MPV01 modular PV array

     

7  

Retrofit to Existing Common Systems

R28 to suit common roller blind systems

For general roller blind automation Drive capacity: up to 3 meters Control options: Smart TUG; Radio control No need for hard wiring Modular solar panel strip to suit various window widths

 

 

R2821 solar powered tubular motor 

Fully integrated solar power tubular 

motor with direct connection to the 

solar panel, no other wiring needed

Modular solar panel  

To be made into any length to 

accommodate site requirements. 

Crown and Wheel set 38 

Fit to: 38mm, 40mm roller 

tubes. 

Crown and Wheel set 44 

Fit to: 43mm, 44mm, 45mm 

and 48mm tubes. 

 

     

8  

There are various roller blind systems offered in the market. They are similar in many ways due to most roller blinds are made with components supplies through a few common designs. These common roller blinds with manual chain drivers can be replaces with Dynaveil R28 solar motor.

Indicative prices for solar motorised conventional roller blinds Use 2.1m drop as example for the indicatives below.

Width (m) 0.61 0.91 1.21 1.51 1.81 2.11 2.41 2.71 3.01

budget 193 218 244 272 300 330 360 392 425

group 1 197 222 249 277 306 336 367 400 433

group 2 203 230 259 290 321 354 388 424 460

group 3 211 240 271 304 339 376 414 454 496

group 4 219 252 287 323 361 401 443 487 532

The Modular Panel

The modular panel is to be supplied by made to size according to specification in the order.

40‐200cm

 

Common roller system

 

Dynaveil R28 solar motor  

Exchangeable with the chain driver 

     

9  

There are 4 standard sizes of modular solar panels. They are MSP 53, MSP 77, MSP 101 and MSP 125. We normally stock the standard solar panels. Therefore supplying of these panels takes less time. You may refer to the information below for selection of the standard solar panels.  

MSP 53 ------ direct exposure to sun light for more than 4 hours during day time.

 

MSP 77------ some direct sunlight exposure but less than 4 hours, e.g. east/west facing.

MSP 101------ no direct sunlight, e.g. south facing.

MSP 125 ------ no direct sunlight and dark area, e.g. trees in front.

How to install a retrofit solar roller blind

With everything is the same, to install a retrofit automated roller blinds has virtually no difference to install a conventional manual blind. The things need to take care are:

53cm

77cm

101cm

125cm

     

10  

Plug motor cable into this socket 

Modular solar panel

3M tape 

glass 

Top mounting fixture

Fix the solar panel to the 

glass with 3M tape 

Using top mounting fixture 

to fix the solar panel to the 

To decide the solar panel size. In general, the solar panel size should be determined by the amount of sunlight getting to the window according to above description of the standard sizes of modular solar panels. The other factors that affect the selection of solar panel size are the width of the glass pane of the window.

The way of mounting the panel. The modular solar panel is designed to be mounted on to the glass directly with the 3M tapes which come with the panel assembly. However, the solar panel can also be mounted to the top with additional top mounting fixtures.

Connection between the motor and the panel. After the solar panel and the roller system installed in place, the motor cable needs to be plugged to the panel at the socket next to the switch. Then the switch needs to be switched on (towards the socket). There are extension leads that can be used in case the motor cable cannot reach the panel.

 

 

 

The switch

     

11  

Fabric Categories for Roller Blinds

Group Budget Type Supplier Widths (m) Group 7 Type Supplier Widths (m)

Vibe Xtra B Shaw 2/2.5/3 Scarborough T Bricos 3

Status T Texstyles 2.5 Sienna T Bricos 2.8

Windsor T Bricos 3

Group 1 Type Supplier Widths (m) Sassari T Bricos 3

Focus B Texstyles 2.2/2.6

Vibe Metallic B Shaw 2/2.5/3 Group 8 Type Supplier Widths (m)

Roma-line B Bricos 2.5 Eco Balance S Bricos

Net Series S Bricos 2.5/3 Palm Beach B Shaw 3

Solarview S Texstyles 2.5/3 Kiribati B Bricos 2.8

Sheerwearve 4510 S Shaw 3.2

Group 2 Type Supplier Widths (m) Aston B Shaw 3

Screen S Shaw 2.5/3.2 Screen Opulence

S Bricos 2.5

Metroshade T Texstyles 2.8 Barbados B Texstyles 2.8

Newport T Bricos 2.8

Group 9 Type Supplier Widths (m)

Group 3 Type Supplier Widths (m) Emporium T Bricos

Centro B Bricos 2.8 Sienna B Bricos 2.8

RR Series S Bricos 2/2.5/3 Sassari B Bricos 3

Newport B Bricos 2.8 Windsor B Bricos 3

Status B Texstyles 2.5 Urbanshade B Shaw 2.4/3

vivid Shade S Texstyles 2.0/3.0 Scarborough B Bricos 3

Riviera B Texstyles 3

Group 4 Type Supplier Widths (m) Serengetti B Texstyles 3

Icon B Show 2.5/3

Kimberley B Texstyles 2.5 Group 10 Type Supplier Widths (m)

Uluru B Texstyles 2.5 Hampton T Bricos

Lava T Bricos

Group 5 Type Supplier Widths (m) Positano B Texstyle 3

Palm T Shaw 3

Java Screen S Texstyles 2.5

Metroshade B Texstyles 2.8

Group 6 Type Supplier Widths (m)

Kiribati T Bricos 2.8 Sheerweave 4500 S Show 2.5/3.2

Sheerweave 4300 S Show 3.2

Riviera T Texstyles 3 B: Blackout T: Translucent S:Sheer

Note: Beside above the standard fabric groups, specific fabrics may also be offered upon request.

     

12  

FRS Valance Solar motorised systems

Standards for FRS Valance System

We offer our clients a third party (Acmeda) valance as an option to those who wish to use our solar roller blinds with valance that they familiar.

Minimum Width 500mm/ Maximum width 4500mm Valance height/Drop 100mm Multifunctional / universal mounting. Snap-lock attachment of valance with screw fastening option. Available in Anodised Silver, has colour coded end side covers. Face Fix = please provide the outside box measurement of the valance, with

returns and we will make blind to suit. Recess Fix – With Returns = order exactly the same as face fix. Recess Fix – Without Returns = the valance will be made to the

measurement ordered, or if no measurement is requested on the order it will be made 2mm bigger than the blind size.

Add‐onpricesforAcmedavalancewidth (m) 0.61 0.76 0.91 1.06 1.21 1.36 1.51 1.66 1.81

FRS80 28.24 31.03 33.82 36.61 39.39 42.18 44.97 47.76 50.55

FRS100 37.11 40.33 43.54 46.76 49.98 53.20 56.41 59.63 62.85

FRS120 41.80 45.17 48.55 51.92 55.29 58.67 62.04 65.41 68.79

width (m) 1.96 2.11 2.26 2.41 2.56 2.71 2.86 3.01 3.16

FRS80 53.34 56.12 58.91 61.70 64.49 67.28 70.07 72.86 75.64

FRS100 66.07 69.28 72.50 75.72 78.94 82.15 85.37 88.59 91.81

FRS120 72.16 75.53 78.91 82.28 85.65 89.03 92.40 95.77 99.15

Rated power ~20W

Charging current ≤180mA

Max running time 2 minutes

Load capacity 30Kg

Nominal speed 25cm/s

Operating temperature 0 – 40˚C

Operating humidity ≤80% RHInput voltage 5-9V DC

Hamstr™ TS20High performance DC curtain motor withinternal Li-ion rechargeable battery

Key features

• No electrician needed• Designed for PV applications• Automatic limits• Obstruction detection• Simplified programming• Low noise operation• Integrated RF receiver• Dry contact control integration• Ultra-responsive touch control• Advanced energy management• Memory loss prevention• Ultra-durable internal battery• Over-discharge protection• 5 year warranty

THE FIRST AND ONLY CURTAIN MOTOR DE-SIGNED FOR PV POWERED APPLICATIONS

The TS20 is a DC curtain motor with integrated rechargeable battery and advanced power and charge management technologies. The first and only curtain motor of its kind on the market, the TS20 is specially designed for PV or low power trickle charge applications. The ability to be connected directly to a PV (solar) power source enables the TS20 to be an ideal solution for retrofit scenarios and other applications where hardwiring is either infeasible or undesirable.

The TS20 motor is designed to work with the FCT200 series track and system hardware from Dynaveil, working together to offer a powerful platform with unparalleled capabilities for the most demanding jobs.

Specifications:

TS20 curtain motor with FCT200 series system hardware

     

13  

Motorised Curtain System

Curtain tracks are normally supplied as assembled. The price for the solar powered curtain motor is $130; and the assembled curtain track is prices as $30+$26/m, e.g. 1m track $56; 2m $82; 3m $108…

Indicative prices for total curtain tracks

Track length (m) 2 3 4 5 6 7 8 9 10

Price (AUD) 212 238 264 290 316 342 368 394 420

Solar powered Curtain Track

Solar powered is the ideal solution to avoid the costs in associated with electric wiring & configuration. Dynaveil curtain track shares with the same modular panel with the solar powered roller blinds. Please refer to the Motor and Modular Panel Only section for details of the costs of the modular panel.

DC Power Supply

In case there is a DC supply on site, or DC power is preferred, the requirement to the current draw to each motor is minimum, e.g. one normal DC power adaptor can power up to 10 curtain systems.

Options of operation and controls

The curtain rack can be operated by touch control, RF remote handset, RF wireless wall switch, interfacing with third party control or BMS.

Modular solar panel 

Solar curtain motor   

Frequency 433.92MHz Operating temperature 0 – 40˚C

Operating humidity ≤80% RH

Battery life ~2 years

Battery type CR2430

Transmit power ≤10mW

Range 20 meters

Modulation ASK

Wireless controlRF transmitters for Dynaveil products

Key features

• Works with all Dynaveil systems• Simple to setup and use• Stylish design• Reliable control up to 20m• Does not need line of sight• 2 year warranty (excl. batteries)

RFC102 remote handset• Six channels• Dedicated keys for preset stops• Bracket for wall mounting

RFC201/202 wall switch• Designed for Australian market• Ultra-low profile for wall fixing• No screws or holes on wall• Easily accessible battery• Five stop positions• Single or dual channel version

SPECIALLY DEVELOPED RADIO FREQUENCY TRANSMITTERS FOR DYNAVEIL SYSTEMS

Wireless controllers enable the convenience of motorised blinds to be operated from anywhere within a home or office environment. Oper-ating on radio frequency, the signals are omnidirectional so there is no need to aim whilst also being able to traverse multiple rooms.

The RFC102 remote handset can control up to 6 systems or groups of systems. Also useful for calibrating blinds, the RFC102 features dedi-cated keys for advanced intemediate stop functionality available on select Dynaveil systems. Wall mounting bracket is included.

The RFC201/202 wall switches are ideal companions for any Dynaveil system. Understated yet stylish, the ultra-low profile switches can be mounted unobtrusively on most surfaces. Comes with holder and special adhesive that does not leave any markings on walls.

Specifications:

RFC202 RFC201 RFC102

     

14  

The controls

All Dynaveil products are operated with the same control platform. There are the 6 channel remote handset, the single channel wall switch and dual channel wall switch. Beside the wireless controllers, all Dynaveil motors have the standard dry contact port which allows for linking with different kinds controls.

Smart phone kit will soon be available to the market. By then, the motors can also be operated be a smart phone.

image description price

Wall switch single channel

$18

Wall switch dual channel

$20

Remote handset 6 channel

$22

To pair a wireless control to the motorised system

Three simple steps (see instruction document for details)

Select channel (no need for the wall switch) On the remote handset

Power off for 10 seconds then power on Separate to other motors nearby

Press and hold OPEN and CLOSE buttons till motor jogs To be done within 90 seconds

When press two buttons together, the LED is flashing in slow blink sequences.

     

15  

To adjust / set limits by a wireless control

Six simple steps (see instruction document for details)

Press A (Preset 1) and B (Preset 3) till motor jogs Enter into setting mode

Press OPEN to move blinds to top

Press A (Preset 1) and CENTRE (Preset 2) till motor jogs Set the top limit

Press CLOSE to move blinds to bottom

Press B (Preset 3) and CENTRE (Preset 2) till motor jogs Set the bottom limit

Press CLOSE (and Preset 3) till motor jogs Out of setting mode

Contact Us

Dynaveil Pty Ltd

Add: 16, 22-30 Wallace Avenue

Wyndham Gate Commercial Centre

Point Cook VIC 3030

Phone: (03) 9369 2998 Email: info@dynaveil.com Website: www.dynaveil.com