Roller Blinds - Olssons Persienner & Markiser ner...Roller Blinds Large – RL The large roller blind system is the solution for all roller blinds with a large surface area of up to

Roller Blinds

Roller Blinds Small – RS

Benthin’s small roller blind system is designed for roller blinds with a small roll diameter and offers an aesthetically pleasing solution for smaller windows.The size of the roller blind is in complete harmony with the size of the window.

A patented spring loaded thrust bearing with a locking function ensures easy, convenient installation using brackets.

The spring mechanism makes the roller blind easier to fit and anyinaccuracies in the spacing between the brackets can be evened out.

There is a side guide profile with optional brush sealing to match the cassette profile.

Wide range of control options

In addition to the manual control options of side pull with chain or cord and spring operation, the small roller blind can also be equipped with a 24 volt motor.

With the adjustable cord holder the discreet cord guide can be fitted at the side on the wall or embrasure, or on the floor for that matter.The cord holder is equally suitable for medium roller blinds.

2

Simple mountingwith fixing profile

No matter whether wall or ceiling mounting is being used, the roller blind with fixing profile simply clips into the clip fixing as a complete unit.

The flat mounting clip enables the blind to be put up quickly and easily with the smallest possible gap to the wall/ceiling.

Discreet cassette profile

A round, two-piece cassette fits in perfectly with the surroundingsand can be mounted quickly andeffortlessly on the wall or ceiling using clips.

Roller Blinds Medium – RM

The medium roller blind system offers a wide range of options and models.

Flexible cover solutions, bracketsor carrier profile, round and squarecassettes with coordinated tube shafts and control options makethe medium roller blind system the perfect solution for virtually every need.

For optimum dim-out the fabric is guided in the side profile by means of the bottom bar end caps.Tight brushes can also be inserted in the rails.

Patented shafts (Ø29/Ø38 mm) with eccentric internal contouring even out tolerances, ensuring that the components sit firmly and securely.

Ease of operation

Tried and tested Ø4,5 x 6,0 mm chain operation is also available with matt ball chains for acontemporary, timeless look.An unobtrusive chain stopper and elegant chain connector, which can also be used as a stopper, areavailable to match.

In addition to the spring operation there is also the option ofcrank operation for larger loadsand improved safety.With this option a double end stop makes it possible to set a top posi-tion as well as the bottom position.

The convenient motor solutionsinclude various 24 volt motors as well as a 230 volt version.

Mounting alternatives

Cassette profiles and fixing profiles mount quickly and easily on wall or ceiling using clips.The fixing profile can also beconveniently mounted using analuminium bracket with screw,while there is an aluminium angle with screw for the cassettes.

The double-sided closing profileis flat on one side and round on the other for use with different roller blind types.The bottom bar attaches to thefabric quickly and firmly with a self adhesive spline and can easily be weighted for light blinds.

3

Roller Blinds Large – RL

The large roller blind system is the solution for all roller blinds with a large surface area of up to 16 m2.It can be fitted with heavy fabrics and offers ideal design options for modern architecture with its ever larger areas of glass.

The system also includes flexible cover and cassette options, as well as side guides to meet every requirement.

A sophisticated shaft system with three diameters and various adapt-ers means that the gear and thrust bearing are suitable for all shaft diameters.

There is a choice of two closingprofiles, which can be flexibly weighted.

Control options

A smooth-running chain drive can be operated with a Ø6 x 12 mm or Ø4,5 x 6 mm plastic ball chainin all colours, or with a Ø4,5 mm metal ball chain.

Auxiliary springs or planetary gears ensure that even heavy blinds can be operated effortlessly.

Alternatively there is a crank drive with a ratio of 3:1.A double end stop makes it possible to set a top position as well as the bottom position.

A selection of various 230 voltmotors offers the most convenientoption for operating large rollers.

Simple, secure installation

Special bracket inserts can be turned through 360°, enabling the bracket to be aligned and positioned accurately.

Variable mounting with a bracket makes secure, concealed attach-ment to wall or ceiling possible.

An adjustable thrust bearing allows shaft alignment, enabling mounting inaccuracies of up to 4 mm in each direction to be evened out.

All types can be coupled together and an adjustable endplug offers the option of setting all blinds to exactly the same height.

4

The Roller Blind SystemRoller blinds in all sizes

With Small, Medium and Large,Benthin’s roller blind systems offer three size ranges and therefore the right solution for every requirement.

Each system includes a suitableselection of specific types, which differ with regard to their control options, configurations and possible applications.

Perfect customisation to thearchitectural setting in terms of design, operation, safety andappearance is guaranteed in every case.

Thanks to their modular concept with as small a number ofcomponents as possible, Benthin’s roller blinds ensure stocking and manufacturing efficiency.

All the components, covers, cassettesand side guides are marked out by their elegant, discreet design,making integration with any window possible.

Premium materials and certified quality guarantee perfectfunctioning and an attractive,first-rate roller blind.

Visible components and profiles match each other perfectly.

All profiles are anodised in silver or powder-coated in white, black or beige, with grey also being available in the case of the large system.The plastic components come in white, grey, black or beige to match.

5

Bracket Cassetteround

Cassetteangular


Roller Blinds System


BracketFixingprofile

Cover flatBracket

Cover flatfixing profile

Fixingprofile

Cover roundBracket

Cover roundfixing profile

1,80 x 2,50 mmax. dimension 2,80 x 3,00 m 2,80 x 3,00 m2,80 x 3,00 m1,80 x 2,50 m 2,80 x 3,00 m 2,80 x 3,00 m2,80 x 3,00 m 2,80 x 3,00 m 2,80 x 3,00 m

Spring

Chain

Cord

Motor

Crank

Cordguiding

Sideprofile

RS01RS05

RS11RS15

RM01RM06RM07

RL01RL06RL07

RL01RL06RL07

RM11RM16RM17

RM21RM26RM27

RM31RM36

RM21RM26RM27

RM31RM36

RM41RM46RM47

RM61RM66RM67

RM51RM56RM57

RM71RM76RM77

RM01RM06RM07

RM11RM16RM17

RM21RM26RM27

RM31RM36

RM41RM46RM47

RM61RM66RM67

RM51RM56RM57

RM71RM76RM77

RS01

4,00 x 4,00 m 4,00 x 4,00 m 4,00 x 4,00 m 4,00 x 4,00 m 4,00 x 4,00 m

RL01

RL06

RL07

RL21RL26RL27

RL21

RL26

RL27

RL31RL36RL37

RL31

RL36

RL37

RL61RL66RL67

RL61

RL66

RL67

RL71RL76RL77

RL21RL26RL27

RL31RL36RL37

RL21RL26RL27

RL31RL36RL37

RL61RL66RL67

RL71RL76RL77

RL71

RL76

RL77

RS11 RM01 RM11 RM21 RM31 RM41 RM61 RM51 RM71

RS02 RS12 RM02 RM12 RM22 RM32 RM42 RM62 RM52 RM72

RS05 RS15

Cassetteround

Bracket


Cassetteround

Cassetteangular



1,80 x 2,00 m

RS21RS26

RS21RS26

RS21

RS22


RM07 RM17 RM27 RM47 RM67 RM57 RM77

Sid

e g

uid

ing

Opera

tion

Oth

ers

Coupling

6


Cassetteangular





Cover flatBracket


Fixingprofile

Cover roundBracket



Spring

Chain

Cord

Motor

Crank

Cordguiding

Sideprofile

RS01RS05

RS11RS15

RM01RM06RM07

RL01RL06RL07

RL01RL06RL07

RM11RM16RM17

RM21RM26RM27

RM31RM36

RM21RM26RM27

RM31RM36

RM41RM46RM47

RM61RM66RM67

RM51RM56RM57

RM71RM76RM77

RM01RM06RM07

RM11RM16RM17

RM21RM26RM27

RM31RM36

RM41RM46RM47

RM61RM66RM67

RM51RM56RM57

RM71RM76RM77

RS01

4,00 x 4,00 m 4,00 x 4,00 m 4,00 x 4,00 m 4,00 x 4,00 m 4,00 x 4,00 m

RL01

RL06

RL07

RL21RL26RL27

RL21

RL26

RL27

RL31RL36RL37

RL31

RL36

RL37

RL61RL66RL67

RL61

RL66

RL67

RL71RL76RL77

RL21RL26RL27

RL31RL36RL37

RL21RL26RL27

RL31RL36RL37

RL61RL66RL67

RL71RL76RL77

RL71

RL76

RL77



RS05 RS15

Cassetteround

Bracket


Cassetteround

Cassetteangular



1,80 x 2,00 m

RS21RS26

RS21RS26

RS21

RS22



Sid

e g

uid

ing

Opera

tion

Oth

ers

Coupling

Typeoverview Roller Blinds

Documentation for all needs

Benthin provides a comprehensive range of documentary material to make it easy for you to get started with a product.Detailed in-depth referencedocuments enable our customersto build strong product knowledgeon all models.

Component Catalogue

Lists all components with information about article numbers, delivery times and order quantities.

Additional exploded drawings with item numbers help with ordering and provide an overview.

Data sheets

Contain detailed information about each model. These may be used for general information purposes or when compiling order documents. They provide information for architects, as well as for manufacturers.

Assembly

Fabrication instructions.A step-by-step guide with detailed figures and descriptions.

Installation instructions

A helpful guide describing, in words and pictures, how to install, operate and care for roller blinds.


Cassetteangular





Cover flatBracket


Fixingprofile

Cover roundBracket



Spring

Chain

Cord

Motor

Crank

Cordguiding

Sideprofile

RS01RS05

RS11RS15

RM01RM06RM07

RL01RL06RL07

RL01RL06RL07

RM11RM16RM17

RM21RM26RM27

RM31RM36

RM21RM26RM27

RM31RM36

RM41RM46RM47

RM61RM66RM67

RM51RM56RM57

RM71RM76RM77

RM01RM06RM07

RM11RM16RM17

RM21RM26RM27

RM31RM36

RM41RM46RM47

RM61RM66RM67

RM51RM56RM57

RM71RM76RM77

RS01

4,00 x 4,00 m 4,00 x 4,00 m 4,00 x 4,00 m 4,00 x 4,00 m 4,00 x 4,00 m

RL01

RL06

RL07

RL21RL26RL27

RL21

RL26

RL27

RL31RL36RL37

RL31

RL36

RL37

RL61RL66RL67

RL61

RL66

RL67

RL71RL76RL77

RL21RL26RL27

RL31RL36RL37

RL21RL26RL27

RL31RL36RL37

RL61RL66RL67

RL71RL76RL77

RL71

RL76

RL77



RS05 RS15

Cassetteround

Bracket


Cassetteround

Cassetteangular



1,80 x 2,00 m

RS21RS26

RS21RS26

RS21

RS22



Sid

e g

uid

ing

Opera

tion

Oth

ers

Coupling

7


Cassetteangular





Cover flatBracket


Fixingprofile

Cover roundBracket



Spring

Chain

Cord

Motor

Crank

Cordguiding

Sideprofile

RS01RS05

RS11RS15

RM01RM06RM07

RL01RL06RL07

RL01RL06RL07

RM11RM16RM17

RM21RM26RM27

RM31RM36

RM21RM26RM27

RM31RM36

RM41RM46RM47

RM61RM66RM67

RM51RM56RM57

RM71RM76RM77

RM01RM06RM07

RM11RM16RM17

RM21RM26RM27

RM31RM36

RM41RM46RM47

RM61RM66RM67

RM51RM56RM57

RM71RM76RM77

RS01

4,00 x 4,00 m 4,00 x 4,00 m 4,00 x 4,00 m 4,00 x 4,00 m 4,00 x 4,00 m

RL01

RL06

RL07

RL21RL26RL27

RL21

RL26

RL27

RL31RL36RL37

RL31

RL36

RL37

RL61RL66RL67

RL61

RL66

RL67

RL71RL76RL77

RL21RL26RL27

RL31RL36RL37

RL21RL26RL27

RL31RL36RL37

RL61RL66RL67

RL71RL76RL77

RL71

RL76

RL77



RS05 RS15

Cassetteround

Bracket


Cassetteround

Cassetteangular



1,80 x 2,00 m

RS21RS26

RS21RS26

RS21

RS22



Sid

e g

uid

ing

Opera

tion

Oth

ers

Coupling

DescriptionBeschreibungDescription

Pieces – MetreStück – MeterPièces – Mètre

Part No.Art.-Nr.Réf-Nº

Delivery TimeLieferzeitDélai de livraison

Rollers Small and Medium • S & M - Rollos • Rouleaux S & M

ColourFarbe

Couleur

Deliv

ery

time/

Lief

erze

it/Dé

lai d

e liv

rais

on: A

= a

t sto

ck/a

b La

ger/e

n st

ock

• B

= m

ax. 3

wee

ks/m

ax. 3

Woc

hen/

3 se

mai

nes

max

. • C

= o

n in

quiry

/auf

Anf

rage

/sur

dem

ande

Version 12-12-20 11

M

M

M

Profiles • Profile • Profilés

S

S

RSM 11Basic profile • Basisprofil • Profilé de base / 40 x 52 mm

anodised • eloxiert • anodisé 5.8 mwhite • weiß • blanc 5.8 mblack • schwarz • noir 5.8 mbeige • beige • beige 5.8 m

58 m58 m58 m58 m

94105161941051719410517294105173

AABB

Front profile, cassette round • Frontprofil, Kassette rund • Profilé de face, coffre arrondi / 40 x 54 mm


58 m58 m58 m58 m

94105181941051919410519294105193

AABB

Basic profile • Basisprofil • Profilé de base / 45 x 63 mm


58 m58 m58 m58 m

2476176 AABB

Front profile, cassette round • Frontprofil, Kassette rund • Profilé de face, coffre arrondi / 52 x 75 mm


58 m58 m58 m58 m

2476175 AABB

Front profile, cassette angular • Frontprofil, Kassette eckig • Profilé de face, coffre angulaire / 48 x 73 mm


58 m58 m58 m58 m

2476180 AABB

0000060906190605

0000060906190605

0000060906190605

26 Version 30-11-2011

Type RM21 Ø29 mm tube shaft

Typ RM21 Ø29 mm Rohrwelle

Type RM21 Ø29 mm axe tubulaire

RM21

2475175

2475147

2475009

2476155

2476061

93005695

94105122

96816000

2476175

2475190

2475325

2475174

2476176

94000005

2475172

2423155

2476101

2476174

2476058

© 2011 Benthin® . Druckfehler, Irrtümer und Änderungen vorbehalten . Version 20-12-2011 .

RM21 - Medium Rollo mit runder Kassette und Kettenbedienung. Optional Seilführung und Profilführung.

Typ RM21

Rollobreite

Rol

lohö

he

Rollobreite

-47 mmRollobreite

-43 mm

Bed

ienu

ngsh

öhe

Größen/Anlagenmaße • Breite : min. 0,30 m max. 2,80 m (stoffabhängig) max. 1,40 m pro Anlage bei Kopplung zweier Rollos (stoffabhängig) max. 0,90 m pro Anlage bei Kopplung dreier Rollos (stoffabhängig) • Höhe : max. 3,00 m (stoffabhängig) max. Bremskraft 4,5 kg • Behang : max. 4,5 kg • Koppeln : bis zu 3 Anlagen des selben Typs mit einer Bedienung, optional Pendelsicherung Antrieb/Mechanik • Seitenzuggetriebe mit Abrollsicherung durch Servokupplung.

Die Servokupplung ermöglicht die exakte, stufenlose Positionierung des Behanges in jeder gewünschten Stellung. • Kassette rund (78 x 80 mm) aus stranggepreßtem Aluminium (Al Mg Si 0,5 F22) montiert auf den runden Endkappen. • Aluwelle (Ø29,0 / Ø38,0 mm) aus stranggepreßtem Aluminium (Al Mg Si 0,5 F22). • Stahlwelle (Ø27,4 / Ø36,0 mm) Wandstärke 0,40 mm (EN 139). • Abschlussprofil (13 x 29 mm) aus stranggepreßtem Aluminium (Al Mg Si 0,5 F22), einsetzbar für Pendelsicherung oder Seitenprofil, Bürstenabdichtung möglich. Zusatzbeschwerung durch Ø5 mm und/oder 4 x 8 mm Stahlprofil möglich. • Kunststoffteile aus hochwertigem, UV-beständigem, temperaturbeständigem und abriebfestem Kunststoff. • Seilführung bis max. 15° Neigung. Stahlseil (Ø0,8 mm) Kunststoffummantelt in schwarz, grau und weiß (Ø1,0 mm). • Profilführung (26 x 46 mm) aus stranggepreßtem Aluminium (Al Mg Si 0,5 F22).

Die Endkappen des Abschlußprofils werden im Seitenprofil geführt. Der Behang reicht zu beiden Seiten 20 mm in die Profilführung. Bürstenabdichtung (Florhöhe 9 mm) innen und außen möglich (je nach Montageart). Bedienung • Manuelle Bedienung

durch Endloskugelkette (Ø4,5 x 6,0 mm) aus Kunststoff auf Polyesterschnur 1,4 mm in grau, weiß, schwarz und beige oder mit gefrosteter Oberfläche in transparent, grau, schwarz und beige. Optional Metallkugelkette (Ø4,5 x 6,0 mm) aus vernickeltem Messing oder rostfreiem Stahl. • Beschwerung durch Gewicht für Kugelkette (Stahlkern in Kunststoffgehäuse) möglich. • Bedienungsseite: wahlweise links oder rechts. • Bedienungshöhe: 0,75 x Rollohöhe (oder frei wählbar). • Endlagenbegrenzung durch Kettenstopper.

Rollobreite

-92 mm

© 2011 Benthin® . Druckfehler, Irrtümer und Änderungen vorbehalten . Version 20-12-2011 .

RM21 - Medium Rollo mit runder Kassette und Kettenbedienung. Optional Seilführung und Profilführung.

Typ RM21

Wand-BefestigungDecken-Befestigung

Maße

Montage

Farben • Kassette rund (78 x 80 mm): technisch eloxiert nach E6/EV1 in silber oder pulverbeschichtet weiß (RAL 9016), schwarz (RAL 9005) und beige (RAL 1015). • Abschlussprofil (13 x 29 mm) technisch eloxiert nach E6/EV1 in silber oder pulverbeschichtet weiß (RAL 9016), schwarz (RAL 9005) und beige (RAL 1015). • Profilführung (26 x 46 mm) technisch eloxiert nach E6/EV1 in silber oder pulverbeschichtet weiß (RAL 9016), schwarz (RAL 9005) und beige (RAL 1015). • Träger: verzinkter Stahl oder weiß (RAL 9016).

Montage • Clip Montage an Wand oder Decke. • Seilführung direktes Anschrauben des Halters (Kunststoff).

19,52

max

. Ø56

79

80

32

13

29

max

. Ø56

30

78

81

13

29

19 4,5

43,4

Clip für Kassette und Seitenprofil Montage

© 2011 Benthin® . Druckfehler, Irrtümer und Änderungen vorbehalten - 5 - Version 19-01-2011

EinbauGegenlager und Getriebe

Verwendung von Wellenadaptern

Einsetzen des Gegenlagers

Das Gegenlager bis zum Anschlag in die Welle einschieben (auf links/rechts achten).

Einsetzen des Gegenlagers Ø 43 mm Welle

Bei der Aluminium-Welle mit 43 mm Durch-messer darauf achten, dass die Stege beim Einsetzen des Gegenlages richtig positioniert sind.

Einsetzen des Getriebes

Das Getriebe bis zum Anschlag in die Welle einschieben.

Einsetzen des Getriebes Ø 43 mm Welle

Bei der Aluminium-Welle mit 43 mm Durch-messer darauf achten, dass die Stege beim Einsetzen des Getriebes richtig positioniert sind.

Je nach Wellendurchmesser ist der Einsatz von Adaptern erforderlich.

Gegenlager und Getriebe Typ RS passen in Stahlwellen Ø 25 mm, Ø 27 mm oder Aluminiumwelle Ø 29 mm. Gegenlager und Getriebe Typ RM passen in Stahlwelle Ø 36 mm oder Aluminiumwellen Ø 38 mm, Ø 43 mm.

Die Adapter werden auf das Gegenlager/Getriebe geschoben und leicht gedreht, so dass sie einrasten.

CLICK CLICK

© 2011 Benthin® . Druckfehler, Irrtümer und Änderungen vorbehalten - 4 - Version 19-01-2011

ArbeitsvorbereitungGegenlager und Getriebe

Excentrisches Gegenlager zusammenstecken

Kette/Schnur in das Getriebe einfädeln

Um die Montage zu erleichtern, das Getrie-be auf einen Halter (Art.-Nr. 24757290000) setzen.

Kette/Schnur in das Getriebe einfädeln (2)

Die Aussparung am Getrieberad dient zur ein-fachen Führung der Kette/Schnur. Diese so in Position drehen, dass die Kette/Schnur leicht eingesetzt werden kann.


Nach dem einsetzen der Kette/Schnur diese stramm ziehen...


...und durch drehen des Getriebes einfädeln.

Die exzentrischen Gegenlager bestehen aus zwei Komponenten, die zusammengesteckt werden. Je nach Montageseite darauf achten, dass das „L“ (links) bzw. das „R“ (rechts) auf dem transparenten Teil lesbar ist. Beide Teile wie auf dem Foto gezeigt zusammendrücken.

Ich bin fest überzeugt, dass diese Zeichnung richtig ist!Weitere Schritte (Einsetzen in die Kassette) wären sonst schlecht möglich.

Kassette • Cassette • Coffre

4

5

6

7

ba

b

a

7

Kassette • Cassette • Coffre

6

<150

<1000

<150

<150

<1000

<150

3094

30

27

111 59

22

27

11394

38 30

18

2

111

59

30

36

119

2

111

59

30

9438 30

36

18 2119

2

113


•Width : max. 1.80m

• HeightCassetteround : max. 2.00m

• HeightBracket/Fixingprofile : max. 2.50m

• Brakecapacity : max. 2.5kg

• Tubeshaft : Ø20/Ø29mm

• Closingprofile : 11x23mm

• Bracket : 55x39mm

• Cassetteround : 63x57mm



• Height : max. 3.00m


• Tubeshaft : Ø29/Ø38/Ø44mm




• Cassetteangular : 75x77mm



• Height : max. 4.00m


• Tubeshaft : Ø43/Ø52/Ø65mm





• Cassetteangular : 118x102mm

BenthinGmbH

Osterstader Str. 16

D-27572 Bremerhaven

T +49 471 79 84 0

F +49 471 79 84 111

[email protected]

Benthin

PondwoodHouse

Pondwood Close

Moulton Park Ind. Estate

Northampton NN3 6RT

T +44 1604 490580

F +44 1604 648446

[email protected]

Benthin Systèmes E.U.R.L

27, Avenue de Montboulon

FR-77165 St. Soupplets

T +33 1 60 61 56 56

F +33 1 60 01 57 11

[email protected]

www.benthin.com© 2012 Benthin® . Misprints, errors and changes excepted . Version 21-02-2012 . 97000220

Documents

Roller Blinds - Olssons Persienner & Markiser ner...Roller Blinds Large – RL The large roller blind system is the solution for all roller blinds with a large surface area of up to