5/24/2018 LTE Parameter and Tuning
1/3
LTE Parameters and TuningPosted by blogger on Wednesday,
November 9, 2011Labels: Long Term Evolution, LTE Optimization, LTE
Tuning
Cell Structure, Configuration and Dimensioningn Initial LTE
parametersn Radio channel organizationn Carrier frequencies and
EARCFNsn Assignment of PCIn Automatic neighbour relation functionn
Type 1and 2 frame structures (FDD/TDD modes)
n TDD mode with MBMSn The benefits of MIMOn MIMO concept and
options for LTEn Physical channels and resource blocksn Reference
signal configuration optionsn Downlink configured control resourcen
Downlink structure with MIMOn Uplink configured control resourcen
PUCCH resource allocationn RACH procedure for MACn Resource
allocation for PRACHn PRACH procedure control
Frequency Planningn Spectrum considerationsn Example global band
allocationn Considerations for spectrum refarmingn Considerations
for spectrum sharingn Multi-frequency and single-frequency
networksn Network simulations for multi- and single frequency
plansn Network throughput simulationsn Simulated performance for
fixed and mobile usersn Simulated performance with and without
MIMO
Idle Mode Parametersn RRC states
n RCC inter-RAT state transitionsn LTE state managementn Idle
mode functionn Cell selectionn Parameters for initial cell
selection
n Cell selection modifications for CSG (femtocells)n Cell
barring at cell selectionn Cell barring for RRC connection
establishmentn Idle mode neighbour listsn Periodic HPLMN searchesn
Cell reselectionn Priority in frequency and technology layers
n Measurement rulesn Normal cell reselection criterian
Reselection and ranking criterian Parameters for cell reselectionn
Mobility statesn Scaling rules for mobility statesn LTE neighbour
lists in UMTSn UMTS measurement rules without absolute prioritiesn
UMTS measurement rules with absolute prioritiesn UMTS reselection
criteria without absolute priorities
5/24/2018 LTE Parameter and Tuning
2/3
n UMTS reselection criteria with absolute prioritiesn LTE
neighbour lists in GSM/GPRSn GSM measurement rules with prioritiesn
GSM reselection criteria with priorities
Connected Mode Parametersn Measurement configurationn
Measurement configuration settingsn Measurement object definition
for LTEn Measurement object definition for inter-RATn Measurement
and object summary
n Measurement gapsn Configuration of LTE reporting criterian
Event triggers relating to LTEn Configuration of inter-RAT
reporting criterian Event triggers relating to inter-RAT
measurementsn Behaviour at event trigger pointsn Measurement report
format LTE/UMTSn Measurement report format GSM/CDMA2000n Intra-LTE
handovern Handover from LTE (IRAT)n UMTS measurement configurationn
LTE measurement objects and reporting in UMTSn UMTS inter-RAT event
triggers
n UMTS inter-RAT event flown UMTS measurement reportingn UMTS
handover to LTEn GSM/GPRS measurement configurationn Key GSM to LTE
measurement parametersn GSM/GPRS measurement reportingn GPRS packet
handover to LTEn Uplink power controln Timing advancen CQI
reportingn CQI reporting optionsn Management of DRX for connected
mode
