24
Labortops 2/2013 Valid until 30.06.2013 Space and time saving with the handy design of the HH-System drawers Porcelain 2 Magnetic stirring hotplate 3 Universal Reaction block 3 Distillation - Jointed glassware 4 Cooler 6 Syringe filters 6 Vacuum pump 7 Vacuum measuring instrument 7 Desiccators/Vacuum Desiccators 8-9 Weighing - Accessories 10-11 Shakers 12 Thermomixers 13 Mylab MiniCube PCR 13 Microscopes slides 14 Microscopes 15 Bottles 16-17 Refrigerators 18 Drawers for refrigerators 18 Cooling systems 19 Thermometers 20 pH- measuring 21 Liquid Handling 22 Lab consumables Dispenser ripette ® pro 23 24

LT_2_2013_LLG_UK

Embed Size (px)

DESCRIPTION

 

Citation preview

Labortops 2/2013

Valid until 30.06.2013

Space and time saving with

the handy design of the

HH-System drawers

Porcelain 2

Magnetic stirring hotplate 3

Universal Reaction block 3

Distillation - Jointed glassware 4

Cooler 6

Syringe filters 6

Vacuum pump 7

Vacuum measuring instrument 7

Desiccators/Vacuum Desiccators 8-9Weighing - Accessories 10-11

Shakers 12Thermomixers 13

Mylab MiniCube PCR 13

Microscopes slides 14

Microscopes 15

Bottles 16-17

Refrigerators 18

Drawers for refrigerators 18

Cooling systems 19

Thermometers 20

pH- measuring 21Liquid Handling 22

Lab consumablesDispenser ripette® pro

2324

Porcelain 2

For more articles see our Laboratory Catalogue from page 87onwards

LLG-Porcelain evaporating dishes withspout, round bottom, semi-deep formGlazed.

Capacity Ext.diam.

Height DIN PK Cat. No.

ml mm mm1020306015028570010004162110240420558

40506380

100125170200728396

127154170

1620253240507480262730425055

1290312903129031290312903129031290312903

11111111111111

9.115 3109.115 3116.239 1779.115 3129.115 3139.115 3149.115 3159.115 3169.000 1509.000 1519.000 1529.000 1536.232 5259.000 154

LLG-Porcelain evaporating dishes withspout, flat bottom, low form

Glazed.Capacity Ext.

diam.Height DIN PK Cat. No.

ml mm mm1020285511025045011001750

50607580

100130160200250

101415202530405555

1290312903

129031290312903

111111111

9.115 3019.115 3029.115 3059.115 3036.231 5409.115 3049.115 3069.115 3079.115 308

LLG-Porcelain evaporating dishes withspout, flat bottom, semi-deep form

Glazed.Capacity Ext.

diam.Height PK Cat. No.

ml mm mm931000

86195

3374

11

6.251 4746.241 820

LLG-Porcelain filter crucibles, with porousbottomDin 12909. Glazed.Capacity Ext.

diam.Height Pore

sizePK Cat. No.

ml mm mm µm888151515252525353535505050

252525303030353535404040454545

282828353535404040434343505050

678678678678678

111111111111111

9.052 0809.052 0819.052 0829.052 0839.052 0849.052 0856.233 1766.233 7489.052 0869.052 0879.052 0889.052 0899.052 0909.052 0919.052 092

LLG-Porcelain melting boats, with eyelet

Unglazed.

Length Width Height PK Cat. No.

mm mm mm

L A B W A R E

®

40758590105

1213131314

108889

11111

9.250 9439.250 9409.250 9426.243 2299.250 941

3

For more articles see our Laboratory Catalogue from page 395,408 onwards

Magnetic stirring hotplates MR Hei-Standard

- The extended heating capacity of 800 W reduces heat-up times by 35 %compared to other units at 600 W

- The chemically resistant KeraDisk® hot plate allows for immediate heat transfer, resultingin quick heat-up times

- In case the heating function fails, stirring will not be discontinued to prevent bumping- A separate on/off button for heating prevents unintentional heat-up. The button is

illuminated for visual confirmation- Damage to the stirrer is categorically ruled out even if exposed to highest temperatures.

All models come with a fire-resistant aluminium die-cast housing- In case of a short-circuit, a damage or removal of the temperature sensor from the media,

the unit powers off completely- The temperature sensor consists of two independent safety circuits which switch off

heating in the unlikely event of overheating- Hermetically-sealed housing protects all mechanical and electronic components from

aggressive environments- The average operational lifespan of 10 years is backed by a 3 year warranty and makes

your purchase a truly worthwhile investment

MR Hei-Standard - Model for standard applications without display- For your protection, an independent safety circuit will switch off heating if the hotplate

temperature goes above 25°C of set temperature- Upgrade this magnetic stirrer with the optional digital thermometer, EKT Hei-Con (Cat.No. 9.720 168), that provides precise temperature control to give you temperatureovershoot protection and reproducible results

- Separate on/off switch for heating prevents an unintentional heat up. When heating isswitched on, the on/off button is illuminated for visual control

- Large analog knobs allow for convenient speed setting from 100rpm to 1400rpm at anaccuracy of ±2% and temperature setting up to 300°C

SpecificationsSpeed, max.: 1400rpmHeating power: 800WHot plate temperature: 20 to 300°CMedium temperature, max.: 250°CTemperature accuracy: ±1°CAccuracy temperature setting (withEKT Hei-Con)

±1°C

Stirring capacity, max. (H20): 20 litresDimensions (WxDxH): 173 x 277 x 94mmWeight: 2.9kgProtection class (DIN 60529): IP32Diameter Hotplate: 145mm

Type PK Cat. No.

MR Hei-Standard EUMR Hei-Standard UK

11

9.720 1566.229 358

LLG-Universal reaction block system formagnetic stirrersUniversal alternative to oil baths

The reaction block allows syntheses to be carried out in round flasks attemperatures of up to 400°C. As a result oil as a heat transfer media is maderedundant and your lab is a safer place with this system. The reaction block ensuressafety at work and preventing oil baths and heating mantles from overheating inyour lab. The messy oil clean-ups that results from changing oil or removing flasksfrom an oil bath will be eliminated. Injuries and burns from hot oil will never happenagain. Uniform mixing is also guaranteed because there is no interference to themagnetic field from the aluminium blocks. This system ensures optimal heattransfer from the heating plate directly into the medium.

- Universal model- For round plates of 135 to 145mm diameter- For square plates of min. 145mm length side

- Reaction blocks are available in four standard sizes.- Delivered adapter allows for use with either IKA or Heidolph magnetic stirrers.- Syntheses in round flasks without oil bath up to 400°C.- Uniform and constant mixing- High-precision thermal conduction directly into the reaction block- Safe and clean working- Made in Germany

Description PK Cat. No.

LLG-Universal reaction block system 50mlLLG-Universal reaction block system 100mlLLG-Universal reaction block system 250mlLLG-Universal reaction block system 500mlAdapter plate for rectangular hotplates2 spare screws and 1 wrench

111111

9.728 8909.728 8919.728 8929.728 8939.728 8959.728 896

Safe Heating and Mixing

Heating - Reaction blocks

Universal

Distillation - Jointed glassware 4

For more articles see our Laboratory Catalogue from page 557,564, 571 onwards

Round bottom flasks with three necks, NSjoints, borosilicate glass 3.3

Manufactured from borosilicate glass 3.3 which is resistant to heat and almostall chemicals. The flasks have thick walls, heavy bases and reinforced rimswhich prevent breaking. They meet the highest quality standards according toDIN 12394. Side arms are at 45 degree angles with the centre neck. NS necks are in compliance with DIN 12242 standards.

Capacity Flaskexternaldiam.

Centre neck

Angledside

necks

PK Cat. No.

ml mm NS NS2505001000250500100020002505001000

851051318510513116685105131

29/3229/3229/3229/3229/3229/3229/3229/3229/3229/32

14/2314/2314/2329/3229/3229/3229/3219/2619/2619/26

1111111111

4.008 3904.008 3914.008 3926.240 9766.240 9776.240 9784.008 3964.008 3934.008 3944.008 395

Flask rings, pressed cork

Height 30mm.

For flasks

Ext.diam.

Int.diam.

PK Cat. No.

ml mm mm10 / 100250 / 5001000 / 200030004000

80110140170210

306090

120150

11111

9.143 0039.143 0069.143 0099.143 0129.143 015

Distilling LinksMade of DURAN® tubing. Distilling links without condenser, with two verticalNS-cones.Cat. No. 9.012 213: with socket NS14/23 for distillation thermometers of55mm built-in length.

Socket Cone Length PK Cat. No.

NS NS mm-14/23

29/3229/32

350350

11

9.012 2039.012 213

9.012 203 9.012 213

Stillheads, ground glass joint, with Liebigcondenser

Made of DURAN® tubing. DIN 12596. With Liebig condenser at 75° and verticaloutlet with NS cone and vacuum connection with glass olives. With socket NS14/23 for distillation thermometers of 55mm built-in length.

Socket Cone Effectivelength

PK Cat. No.

NS NS mm14/2314/23

29/3229/32

250400

11

9.012 2669.012 268

9.012 266

Distilling links, Claisen-type

Made of DURAN® tubing. According to DIN 12594. With Liebig condenser(angled 75°) and vertical head to Claisen, water and vacuum connection witholives. With two sockets NS 14/23 for distillation thermometers of 55mm built-in length.

Socket Cone Effectivelength

PK Cat. No.

NS NS mm14/2314/23

14/2329/32

160250

11

9.012 2719.012 276

9.012 276

Distillation - Jointed glassware5

For more articles see our Laboratory Catalogue from page 557,585 onwards

Condensers out of borosilicate glass 3.3

Made of borosilicate glass 3.3 which is resistant to heat and almost allchemicals. They meet the highest quality standards. They are supplied eitherwith glass side arm or with polypropylene side arm. The Polypropylene sidearm has a screw thread connector for easy and safe fitting of the tubing. The side arms accept tubing with 8/9mm bore size.

Dimroth condensersAccording to DIN 12591.

Description NS Effectivelength

PK Cat. No.

mmwith PP side armwith PP side arm

29/3229/32

250400

11

9.012 5479.012 545

Liebig CondensersAccording to DIN 12576.

Description NS Effectivelength

PK Cat. No.

mmwith PP side armwith PP side armwith glass side armwith glass side arm

29/3229/3229/3229/32

250400250400

1111

9.012 5464.008 4057.970 2786.236 239

Spiral condensersAccording to DIN 12592.

Description NS Effectivelength

PK Cat. No.

mmwith glass side armwith glass side armwith glass side armwith PP side armwith PP side armwith PP side arm

14/2329/3229/3214/2329/3229/32

160250400160250400

111111

9.012 5486.257 8214.008 4114.008 4126.257 8204.008 414

Baysilone® silicone high vacuum grease

For use up to 10-6 mbar. -50 to +200°C. Supplied in 35g tube.

Type PK Cat. No.

Low viscosityMedium viscosityHigh viscosity

111

9.116 9029.116 9039.116 904

BUDDE - joint greaseFor all glass joints. Transparent, vacuum tight, water washable and watersoluble. Maintains practically the consistency between -30°C and +200°C,non-solidifying. Compatible with most elastomers. Biodegradable. Tube of 80g.

Weight PK Cat. No.

g80 1 9.116 950

Clipox® Clips for NS ground glass joints

Clipox® Clips are safe, universal clips for NS conical ground glass joints.Available to secure NS conical ground glass joints including stopcocks,vacuum-stopcocks and reagent bottles with glass stoppers.

Clipox® simplifies the daily laboratory work and increases the safety ofglassware.- Easy to mount and to remove due to two-sided handles- To be used with stand clamps- Secures horizontal and vertical in case of pressure overload- Longevity of suspension and shape due to spring steel wire- Outstanding thermal, chemical and acid resistance- Material: high grade stainless steel, V4A (1.4568)- Made in Germany, production certified according to ISO 9001

Joint size PK Cat. No.

NS10121419242934404560

5555555555

9.011 4009.011 4019.011 4029.011 4039.011 4049.011 4059.011 4069.011 4079.011 4089.011 409

4

4

5

5

1

1

2

2 3

3

Cooler - Syringe filters 6

For more articles see our Laboratory Catalogue from page 663,750 onwards

Compact Recirculating Cooler F250 EcoChiller

- Environmentally friendly operation with low energy consumption- No side vents, instruments can be placed right next to other equipment- All wetted parts made of stainless steel or high grade plastic- Large, bright LED temperature display- Compact design and small foot print- Splash-proof membrane keypad- Drain tap- Easy filling

Due to its high efficiency the F250 is an economic and environmentally friendlyalternative to conventional tap water cooling.

Working temperature range: -10 to +40°CTemperature stability external: ±5°CCooling capacity: at 20°C: 0.25 kW

at 0°C: 0.18 kWat -10°C: 0.09 kW

Pump capacity flow pressure: 0.35 barPump capacity flow rate: 15 l/min

Type PK Cat. No.

EcoChiller F250 1 9.698 525

LLG-Syringe Filters

We offer a line of syringe filters especially designed to provide efficientfiltration of a broad variety of fluids, solvents, aqueous or inorganic solutions.Our syringe filters cover most applications in HPLC, pharmaceutical,environmental, biotechnology and food and beverage testing laboratories.- Housing injected in Polypropylene or MABS- Multifunctional Syringe filters equipped with Female Luer-Lock/Male Luer

Lock or Male Luer Slip connections for different applications- Pre-sterilised or non-sterile- Sterile products in individual hard blister- Superior pressure stability- Easy to identify because of colour code and printed description

LLG-Syringe Filters, non-sterile

Membrane Poresize

Housing Diam. PK Cat. No.

µm mmCACACACACACANylonNylonNylonNylonRCRCRCRCPEPEPEPEPTFEPTFEPTFEPTFEPESPESPESPESPVDFPVDFPVDFPVDF

0.200.200.450.450.800.800.200.200.450.450.200.200.450.450.200.200.500.500.200.200.450.450.200.200.450.450.200.200.450.45

Acrylic, blueAcrylic, blueAcrylic, yellowAcrylic, yellowAcrylic, greenAcrylic, greenPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPAcrylicAcrylicAcrylicAcrylicPPPPPPPP

132513251325132513251325132513251325132513251325132513251325

500500500500500500500500500500500500500500500500500500500500500500500500500500500500500500

9.055 5009.055 5019.055 5029.055 5039.055 5047.970 3899.055 5209.055 5219.055 5229.055 5239.055 5309.055 5319.055 5329.055 5339.055 5409.055 5419.055 5429.055 5437.970 4029.055 5357.970 3856.255 3319.055 5249.055 5259.055 5267.970 2137.970 2587.970 3879.055 5347.970 286

LLG-Syringe Filters, sterile

Membrane Poresize

Diam. Housing PK Cat. No.

µm mmCACACACA

0.200.200.450.45

13251325

Acrylic, blueAcrylic, blueAcrylic, yellowAcrylic, yellow

50505050

9.055 5109.055 5119.055 5129.055 513

Compact designLow energy consumption

L A B W A R E

®

Vacuum technology7

For more articles see our Laboratory Catalogue from page 978,993 onwards

Diaphragm pump ME 1

Vacuum filtration is one of the most common applications used for samplepreparation in chemistry, microbiology, waste water control and otheranalytical processes. The new ME 1 and ME 1C diaphragm pumps offer acompact, high performance and easy-to-use solution which is perfect for singlefiltrations. The functional, space saving and innovative design with visible topmounted power switch ensures convenient and quick operation for day-to-daylab work. Robust PTFE diaphragms and valves provide optimal chemicalresistance. An optional manual control valve with dial gauge enables variablefine adjustment of the pumping speed and ultimate vacuum.- whisper quiet and very low vibration- maintenance-free drive system- proven long diaphragm life

Type Flowrate

(50/60 Hz)

Ultimatepressure

Dimensions(W x D x H)

PK Cat. No.

m³ / hr. mbar mmME 1 CEEME 1 CHME 1 UK

0.7 / 0.850.7 / 0.850.7 / 0.85

100100100

247 x 121 x 145247 x 121 x 145247 x 121 x 145

111

9.880 9309.880 9319.880 932

9.880 930

Chemistry diaphragm pump, ME 1C

One-stage diaphragm pumps are an excellent solution for continuous, oil-freepumping of gases and vapours with a modest vacuum requirement. In contrastto water-jet pumps they do not consume water and therefore do not produceany contaminated waste water in daily use. Typical applications for the ME 1Care filtrations and solid phase extractions with solvents. An optional manualcontrol valve with dial gauge enables variable fine adjustment of the pumpingspeed and ultimate vacuum.- high chemical resistanceType Flow

rate (50/60 Hz)

Ultimatepressure

Dimensions(W x D x H)

PK Cat. No.

m³ / hr. mbar mmME 1C CEEME 1C CHME 1C UK

0.7 / 0.850.7 / 0.850.7 / 0.85

100100100

247 x 121 x 145247 x 121 x 145247 x 121 x 145

111

9.880 9349.880 9359.880 936

Diaphragm pumps ATEX-models available on request.

9.880 934

LLG-Vacuum measuring instrument DVR 2Versatile vacuum gauge for vacuum measurement between atmosphericpressure and 1 mbar.With integral, alumina ceramic, pressure transducer providing excellentcorrosion resistance and long-term stability.

Also available with DKD initial delivery calibration (Cat. No. 9.882 221). Pleaseorder separately.

SpecificationsMeasuring range: 1080 to 1mbar (hPa), 810 to 1 TorrMeasurement principle: Capacitive; gas type-independent absolute

pressure measurementMeasuring accuracy: < 1mbar (0.75 Torr) ±1 digitPower supply/battery: 9V Lithium battery/1.2 Ah Ultralife U9VLDimensions (W x H x D): 115 x 115 x 66mmWeight: 0.40kg

Type PK Cat. No.

DVR 2 1 9.882 209

Vacuum regulator valve for ME 1 and ME 1C

With manual vacuum control using air bleed. The manometer can be mountedand pivoted in several orientations for optimal visibility. High chemicalcompatibility (especially with the vacuum regulator valve for ME 1C)

Description PK Cat. No.

Vacuum regulator valve for ME 1Vacuum regulator valve for ME 1C

11

9.880 9389.880 939

L A B W A R E

®

Desiccators 8

For more articles see our Laboratory Catalogue from page 998onwards

LLG-Desiccator with plastic knob, stopcockand porcelain plate

Bottomdiam.

PK Cat. No.

mm150200250300

1111

9.042 7409.042 7419.042 7429.042 743

LLG-Vacuum desiccator, polycarbonate,round formCost effective alternative to glass desiccators. Highly transparent, lightweight,shatterproof, made of polycarbonate.Silicon O-ring and specially designed 'locking clip' allows use without grease.Flange lock holds the bottom and the lid together during non-vacuumconditions.Three-way stopcock provides great convenience for consistent vacuum draw,vacuum release or gas exchange e.g. inert gas.Maximum vacuum of 1 Torr (1.3mbar; 1.3 x 10-4 MPa) for more than 72 hours.Also available in brown with UV-blocking effect for light sensitive samples.G Models will be delivered with a vacuum gauge.Included in delivery: Drying agent tray, perforated sample tray, O-ring andflange locker.

Type Ext.diam.

Capacity PK Cat. No.

mm litresVDR-20G VacuumDesiccator with gaugeVDR-25G VacuumDesiccator with gaugeVDR-30G VacuumDesiccator with gauge

242

308

385

6

10

20

1

1

1

9.042 753

9.042 757

9.042 761

LLG-Vacuum desiccator cabinet,polycarbonate, square form

High-quality and stable construction made of polycarbonate. Highlytransparent, lightweight, shatterproof and stackable.Maximum vacuum of 1 Torr (1.3mbar; 1.3 x 10-4 MPa) for more than 72 hours,with built-in vacuum gauge.Also available in brown with UV-blocking effect for light sensitive samples.Included in delivery: Vacuum gauge, O-ring, drying agent tray, 2 x perforated sample trays (VDC-21 and VDC-11) or 3 x perforated sampletrays (VDC-41 and VDC-31).

Type Internal dimensions(W x D x H)

Capacity PK

mm litresVDC-11VDC-21VDC-31VDC-41

248 x 254 x 238346 x 365 x 246355 x 375 x 345355 x 374 x 445

11233545

1111

L A B W A R E

®

Cat. No.

9.042 7699.042 7679.042 7659.042 763

Desiccators9

For more articles see our Laboratory Catalogue from page 1001onwards

Desiccator Mini Premium, polycarbonateThree versions (one, two or three permanently fixed compartments),one-touch door, including desiccant.

Mini Premium Desiccator including 2 shelves, hygrometer. Bottomwith non-slip rubber feet.

Product advantages:- One Touch Door with circular seal- Robust construction- Transparent, shatterproof cabinet made of polycarbonate- Superb all-round visibility- Hinge door with wide opening angle- Lightweight, transportable- Stackable- Desiccant in a handy, resealable container included in delivery

Applications:Ideal for small parts, very handy.

SICCO Desiccators are designed for storing or drying humidity sensitiveproducts using silica gel. The tight fitting door protects the contents fromcontamination from the atmosphere. The controlled environment inside thedesiccators are ideal for storing reference materials, retained samples,metallographic specimen, tobacco and DNA-samples.

SpecificationsPanels: clearTemperature resistance: from -35°C to +70°CUse: normal pressure

Type Internal dimensions(W x D x H)

Volume PK Cat. No.

mm litresMini 1 PremiumMini 2 PremiumMini 3 Premium

212 x 180 x 162*212 x 180 x 162*212 x 180 x 162*

1 x 6,22 x 6,23 x 6,2

111

9.042 6529.042 6539.042 654

9.042 652

9.042 653 9.042 654

Desiccators Mini Black Premium and MiniProtect Premium, polycarbonateIncluding desiccant, black or orange, non-transparent polycarbonate panelsreduce light incidence and protect against ultraviolet radiation, stackable.

Mini Black Premium and Mini Protect Premium Desiccator includes 2 shelves, hygrometer, bottom with non-slip rubber feet.

Product advantages:- One Touch Door with circular seal- Robust construction- shatterproof cabinet made of polycarbonate- Hinge door with wide opening angle- Lightweight, transportable- Stackable- Desiccant in a handy, resealable container included in delivery

SpecificationsPanels: black or orangeTemperature resistance: from -35°C to +70°CUse: normal pressure

Type Internal dimensions(W x D x H)

Volume PK Cat. No.

mm litresMini Black PremiumMini Protect Premium

212 x 180 x 162212 x 180 x 162

6,26,2

11

9.042 6599.042 660

9.042 659

9.042 660

with UV protection

* per chamber.

Weighing 10

For more articles see our Laboratory Catalogue from page 310,321 onwards

Analytical and Precision Balances Explorer®

The new Explorer® is the culmination of the very best thinking from the mind ofOHAUS, created to deliver quality and dependability that simply has no equal.

Explorer is the highest performing, most technically advanced range ofanalytical and precision balances from OHAUS; a product so extraordinary it’slike nothing you’ve seen before!

- Unbeatable user interface featuring a high resolution, 5.7“ colour TFT displaywith resistive touch screen that responds to the operator’s touch or stylus

- Modular design: Display features include angular adjustment, easy accesscommunication ports, left and right side cable exit, tower and wall mountready. Base features include QuadraStance™ design with four adjustablethumbwheels for easy levelling, robust die-cast metal bottom housing andcable storage system.

- Four touchless sensors for hands-free operation of print, tare, calibrate andmore

- Large, easy access draftshield with light removable, frameless doorsconstructed of antistatic coated glass and track mounted with sealedbearings for a smooth and efficient gliding action

- Easy and powerful interfacing capabilities with RS232 and USB interfacesbuilt in as standard and further interface options available

- Multiple application modes plus library for storage of personal applicationsettings

- AutoCal™ fully-automatic internal calibration system- EC Type approved versions also available (models ending with M)

Type Capacity Readability Platedimensions

PK Cat. No.

g mmEX223EX423EX423MEX623EX1103EX1103MEX2202EX4202EX4202MEX6202EX10202EX10202MEX6201EX10201EX10201M

220420420620

110011002200420042006200

10200102006200

1020010200

1 mg1 mg1 mg1 mg1 mg1 mg

0.01 g0.01 g0.01 g0.01 g0.01 g0.01 g0.1 g0.1 g0.1 g

Ø 130Ø 130Ø 130Ø 130Ø 130Ø 130

180 x 210180 x 210180 x 210180 x 210180 x 210180 x 210180 x 210180 x 210180 x 210

111111111111111

9.902 3759.902 3769.902 3779.902 3789.902 3799.902 3809.902 3819.902 3829.902 3839.902 3849.902 3859.902 3869.902 3879.902 3889.902 389

LLG-Weighing bottles with NS Stopper,Borosilicate glass 3.3With writing area.Available in tall or low shape.Capacity Diam. Height NS Form PK Cat. No.ml mm mm6101515203045457080110

2525354030503560408050

2540302550307030803080

19/1219/1229/1234.5/1224/1245/1229/1250/1234.5/1280/1245/12

lowtalllowlowtalllowtalllowtalllowtall

11111111111

9.300 1519.300 1609.300 1529.300 1509.300 1619.300 1539.300 1629.300 1549.300 1639.300 1559.300 164

LLG-Aluminium weighing dishes

Aluminium foil, for sample handling. With a flanged, crimped wall for rigidity.Finger-tab handle can be etched for identification prior to weighing (Not included on Cat. No. 6.236 854). Made from oil-free, lightweightaluminium.

Diam. Height PK Cat. No.

mm mm435770101

1214168

10010010050

6.238 1386.238 1396.238 1406.236 854

6.236 854

L A B W A R E

®

Weighing11

For more articles see our Laboratory Catalogue from page 321onwards

LLG-Diamond weighing boats, antistatic, PSBiologically inert and resistant to dilute and weak acids, aqueous solutions,alcohols, and bases. Temperature range -10 to +70°C. Can be used withmicrowave moisture analysers. Features a diamond shape that easily flexes for accurate pouring and a wide, flat bottom to resist tipping.

Capacity Colour PK Cat. No.

ml mm530100530100

55 x 35 x 678 x 56 x 14119 x 90 x 1955 x 35 x 678 x 56 x 14119 x 90 x 19

whitewhitewhiteblackblackblack

1000500250

1000500250

9.900 7889.950 1949.950 1959.900 8019.950 1969.950 197

LLG-Square weighing boats, antistatic, PS

Biologically inert and resistant to dilute and weak acids, aqueous solutions,alcohols, and bases. Temperature range -10 to +70°C. Can be used withmicrowave moisture analysers. Boats are shallow with a wide, flat bottom to resist tipping. Rounded corners simplify transfer.

Capacity Dimensions(W x D x H)

Colour PK Cat. No.

ml mm71002507100250

46 x 46 x 885 x 85 x 24140 x 140 x 2246 x 46 x 885 x 85 x 24140 x 140 x 22

WhiteWhiteWhiteBlackBlackBlack

100010001000100010001000

9.900 7859.900 7869.900 7879.900 7899.900 7919.900 800

LLG-Hexagonal weighing boats, antistatic, PSBiologically inert and resistant to dilute and weak acids, aqueous solutions,alcohols, and bases. Temperature range -10 to +70°C. Can be used withmicrowave moisture analyzers. Bend flexible boats at points to form pourspouts. Flat bottoms to resist tipping. Sloping sides provide accurate transfer.

Size Colour PK Cat. No.

mmSmallMediumLargeX-Large

38 x 25 x 964 x 51 x 19102 x 76 x 22127 x 89 x 31

whitewhitewhitewhite

500500500500

9.900 8939.900 8949.900 8959.900 896

L A B W A R E

®

L A B W A R E

®

Dimensions(W x D x H)

Dimensions(W x D x H)

Shakers 12

For more articles see our Laboratory Catalogue from page 451,458 onwards

3D ShakerThe HLC by DITABIS 3D shaker works with a rotational 3D motion.Application areas for this device are cultivation and ventilationapplications, DNA-extractions as well as colouring and decolouring ofgels in life science sectors. The rock-solid metal housing and the excellentprice of the HLC by DITABIS 3D shaker will elate you.

SpecificationsSpeed: 5 to 50rpmTimer: 0 to 120minMax. capacity: 5kgPlatform dimensions (L x W): 290 x 260mmOverall dimensions (WxDxH): 340 x 400 x 125mmPower supply: 230V, 50Hz

Type PK Cat. No.

3D shaker EU3D shaker UK3D shaker CH3D shaker, double platform EU3D shaker, double platform UK3D shaker, double platform CHMat with 12 channels, 260 x 290mm

1111111

9.777 2509.777 2879.777 2889.777 2519.777 2899.777 2909.777 252

Orbital Shaker MO10The HLC by DITABIS Orbital Shaker works with an orbital shaking motion.Application areas for this device are life science, diagnostics, foodscience and chemics. It's rock-solid metal housing, the large accessoriesrange and excellent price make the HLC by DITABIS Orbital Shaker a real all-rounder.

SpecificationsSpeed: 50 to 400rpmTimer: 0 to 120minMax. capacity: 10kgPlatform dimensions (L x W): 350 x 400mmOverall dimensions (WxDxH): 410 x 570 x 140mmPower supply: 230V, 50Hz

Type PK Cat. No.

Orbital Shaker MO10 EUOrbital Shaker MO10 UKOrbital Shaker MO10 CH

111

9.777 2539.777 2919.777 292

Accessories for Orbital shaker MO10Description PK Cat. No.

Universal Platform with 5 rollers, 350 x 400mmPlatform fastening for Erlenmeyer clipsErlenmeyer Clip 250ml

111

9.777 2569.777 2599.777 262

Very quiet operation.

Suitable for continuous use.

Smooth and gradual increase of speed.

Thermomixers13

For more articles see our Laboratory Catalogue from page 1221,1227 onwards

- Universal field of application- Linear shaking motion for maximum mixing- Unbeatable for small test quantities- Wide range of different programs- Widest temperature range- Highest temperature accuracy- 30 interchangeable blocks and custom made blocks

CoolingThermoMixer MKR 13SpecificationsTemperature operation range: Amb. -18°C to +100°CTemperature adjustable range: -10°C to +105°CAccuracy/resolution: ±0.1°C/0.1°CMax. heating time: 6°C/minMax. cooling time: 12°C/min

200rpm to 1500rpmOrbit: 3mm orbitalDimensions (WxDxH): 220 x 330 x 144mmCapacity: 1 exchangeable block*Weight: 9kgElectrical heating/cooling power: 130WSupply requirements: 230V, 50HzSmart Control: 30 program steps, short mix, interval

shaking

Description PK Cat. No.

CoolingThermoMixer MKR 13CoolingThermoMixer MKR 13 UKCoolingThermoMixer MKR 13 CH

111

9.777 2009.777 2719.777 272

*Exchangeable blocks are not included in delivery.

HeatingThermoMixer MHR 23SpecificationsTemperature operation range: Amb. +3°C to +130°CTemperature adjustable range: 0°C to +135°CAccuracy/resolution: ±0.1°C/0.1°CMax. heating time: 9.5°C/min

200rpm to 1500rpmOrbit: 3mm orbitalDimensions (WxDxH): 220 x 330 x 109mmCapacity: 2 exchangeable blocks*Weight: 7.0kgElectrical heating power: 350WSupply requirements: 230V, 50HzSmart Control: 30 program steps, short mix, interval

shaking

Description PK Cat. No.

HeatingThermoMixer MHR 23HeatingThermoMixer MHR 23 UKHeatingThermoMixer MHR 23 CH

111

9.777 2069.777 2779.777 278

*Exchangeable blocks are not included in delivery.

PCR-Instrument Mylab MiniCube PCRRapid PCR machine that ensures protection against over- and under-shootingof the temperature and at the same time cycles the temperature 4-5 timesfaster than a standard PCR machine. The MiniCube PCR is an ultra rapid smallPCR instrument based upon two heat blocks mounted on a linear stage. Themotorized stage moves the heat blocks back and forth and allows you to do atwo stage PCR and complete a 35 cycles PCR reaction in about 15 minutes instandard mode.The MyLab MiniCube PCR is intended to be used for rapid test of PCR protocolsor sample preparation procedures where the scientist "just wants to know ifDNA was extracted" or "just wants to know if the newly added changehampers the PCR reaction". The system is also ideal for educationalinstitutions where a full PCR experiment including setup, PCR amplification andgel electrophoresis has to be completed within the time frame of a 45 minuteclass. Very small size of only 12.5 x 12.5 x 12.5cm and is controlled by a USBcable to PC, Mac or Linux computer.

SpecificationsBlock capacity: 16 x 0.2ml PCR tubesTemperature range: RT to +115°CTemperature control: ±0.2°CExternal infra-red thermo sensor*: ±0.2°CHeating rate: 10°C and 20°C per secondCooling rate in air stream: approx. 10°C per second

Description PK Cat. No.

MiniCube PCR 1 9.407 550*for monitoring the temperature in the PCR solution

Exchangeable blocks for ThermoMixerType For PK Cat. No.

BM 15BM 20BZ 15BZ 50

micro tubes, 24 x 1.5ml, conicalmicro tubes, 24 x 2.0ml, cylindricalfalcon tubes, 14 x 15ml, with insulating lidfalcon tubes, 6 x 50ml, with insulating lid

1111

9.777 1229.777 1239.777 1289.777 129

1

1

2

2

35 cycles PCR reaction in 15 minutes

Shaking frequency:

Shaking frequency:

Microscopy 14

For more articles see our Laboratory Catalogue from page 1027,1037 onwards

LLG-Slides

Made of Soda-lime-glass. According to ISO 8037/I with CE-mark,manufactured in compliance with Directive 98/79 EC (IVD). With colour-codedwriting patch as outlined below. Size approx. 76mm x 26mm. Nominalthickness 1.0mm. Ready-to-use, pre-cleaned. Packed in boxes of 50 slides.

Description Edge finish

PK Cat. No.

Without frosted areaWith frosted areaWith frosted areaWithout frosted areaWith frosted area whiteWith frosted area blueWith frosted area pinkWith frosted area yellowWith frosted area greenWith frosted area orangeWith frosted area violetWith frosted area whiteWith frosted area blueWith frosted area pinkWith frosted area yellowWith frosted area greenWith frosted area orangeWith frosted area violet

CutCutGround 90°Ground 45°CutCutCutCutCutCutCutGround 45°Ground 45°Ground 45°Ground 45°Ground 45°Ground 45°Ground 45°

505050505050505050505050505050505050

9.160 8009.160 8019.160 8029.160 8039.160 8049.160 8059.160 8069.160 8079.160 8089.160 8099.160 8109.160 8119.160 8129.160 8139.160 8149.160 8159.160 8169.160 817

LLG-Adhesive microscope slidesMade of Soda-lime-glass, according to ISO 8037/I with CE-mark,manufactured in compliance with Directive 98/79 EC (IVD). With frosted whitewriting patch, positive charged. Size approx. 76mm x 26mm, nominalthickness 1.0mm. Ready-to-use, pre-cleaned. In foil-packed plastic boxes of72 slides.

Description Edge finish

PK Cat. No.

With frosted area white,(+) positive chargedWith frosted area white,(+) positive charged

Ground 90°

Ground 45°

72

72

9.160 818

9.160 819

LLG-Cover slipsMade of borosilicate glass 3.3, in accordance with DIN ISO 8255/I with CE-mark, manufactured in compliance with the Directive 98/79 EC (IVD). In plastic hinged lid boxes, shrink wrapped in aluminium protective foil.

Width Length Thickness PK Cat. No.

mm mm mm182022243240506050

182022242424242424

0.13-0.160.13-0.160.13-0.160.13-0.160.13-0.160.13-0.160.13-0.160.13-0.160.16-0.19

200200200200100100100100100

9.160 8229.160 8239.160 8249.160 8259.160 8279.160 8289.160 8299.160 8309.160 831

Lens cleaning tissuesNon-abrasive cleaning for delicate optical surfaces. Lint-free fibre paper is ideal for cleaning lens and optics.5 Booklets with 100 sheets.

Length Width PK Cat. No.

mm mm150 100 500 9.056 899

L A B W A R E

®

Microscopy15

For more articles see our Laboratory Catalogue from page 1017onwards

Digital CMOS Microscope Camera Moticam 1Ideal for an introduction to Digital Microscopy

Compact design with USB 2.0 output (cable attachable)- Sensor type: CMOS- Optical calculation: 1/4"- Focusable lens: 8mm- Live resolution: 800 x 600px

Supplied with 2 variable diameter eyepiece couplers, macrotube for specimenobservation, Motic 4-dot calibration slide, Software Motic Images Plus 2.0 for PC (Ml) andMAC. Operation system: Windows XP and higher, Mac OSX

Type Description PK Cat. No.

MOTICAM 1 1MP (max. 800x600px) 1 6.253 608

USB-Hand held microscope with integrated2 megapixels camera, D-EL1 ecoline- With integrated LED illumination and Motic application software- Sensor CMOS 1/3"- 2 Megapixel with USB 2.0 output- Illumination 8-LED in ring formation with 2-step brightness control- Power Direct from computer through USB 2 connection- Focus Soft-grip focus wheel- Direct capture button- 2 Step First Magnification 10X-50X. Second magnification at 200X

(depending on screen size)- Motic EcoLine Tool application softwareCalibration slide and metal stand included.

Type PK Cat. No.

D-EL1 ecoline 1 9.727 034

Basic Biological Microscope for Educationand Routine, BA210- Infinity Optics Optik [CCIS®]- Observation Tube Binocular -/Phototube 30°, F.N. 20- Interpupillary Distance 55-75mm- Eyepieces High-Eyepoint N-WF 10x/20mm provide dioptre adjustment for

both eyes- Nosepiece reversed quadruple- Objectives CCIS EF-N Plan 4x, 10x, 40x-S, 100x-S-Oil- Stage 140 x 135mm surface, 76 x 50mm movement, coaxial controls right

hand- Condenser focusable Abbe N.A. 1.25 with iris diaphragm and slider slot for

Phase 10x-100x- Focus Z-Axis movement 25mm stroke, fine focus with 2µm increment, coarse

focus with torque adjustment- Illumination 6V/30W halogen with intensity control- Universal power supply 100-240V (CE)

Supplied with: diameter 45mm blue filter, immersion oil (5ml), power cord,Allen hexagonal key, vinyl dust coverOptional available Phase-contrast 10x-100x, DF 10x-40x, Polarization

Type Description PK Cat. No.

BA210 Binocular 1 9.727 025

Bottles 16

For more articles see our Laboratory Catalogue from page 30, 57onwards

Aspirator Bottles, wide mouth, PE-HD

Suitable for food. With carrying handle. Ideal for containing liquids, powdersand granules. Very strong and durable quality for extended use over time.With gasket in the screw cap and additional inner cap for a very tight seal.Screw cap can be attached to the bottle using the integrated loops.

Capacity NeckInt. diam.

Bodydiam.

Height Handle PK Cat. No.

Litres mm mm mm510

94109

170210

350420

11

11

9.139 9389.139 939

Aspirator Bottles, narrow neck, PE-HD

With carrying handle. Suitable for food. Very strong and durable quality forextended use over time. With gasket in the screw cap for a very tight seal.Screw cap can be attached to the bottle using the integrated loops. Withthread of 12mm depth for use with a ¾“ stopcock. Please order the stopcockseparately (Cat. No. 9.109 937). The bottles can be used in ambienttemperatures below 0°C.Capacity Neck

Int. diam.

Bodydiam.

Height Handle PK Cat. No.

Litres mm mm mm5102550

62629797

131319192222

160210270350

350430570690

1122

1111

9.139 9299.139 9309.139 9319.139 932

Aspirator Bottles, narrow neck, PE-HD,with stopcockWith carrying handle and ¾” stopcock. Thread and opening for stopcockprovided. Suitable for food. Very strong and durable quality for extended useover time. With gasket in the screw cap for a very tight seal. Screw cap can beattached to the bottle using the integrated loops. The bottles can be used inambient temperatures below 0°C.

Capacity NeckInt. diam.

Bodydiam.

Height Handle PK Cat. No.

Litres mm mm mm5102550

52528484

160210270350

350430570690

1122

1111

9.139 9339.139 9349.139 9359.139 936

LLG-Narrow-neck bottles with cap, PE-LD

Transparent with cap.

Capacity NeckInt. diam.

Bodydiam.

Height PK Cat. No.

ml mm mm mm5010025050010002000

3747637896

120

78105119152206264

5020101041

9.073 5009.073 5019.073 5029.073 5039.073 5049.073 505

Advantage pack

Bottles 17

For more articles see our Laboratory Catalogue from page 46onwards

LLG-Wide neck bottles with screw cap, PE-LDTransparent, with cap. The wide neck opening means that the bottles are easyto fill and clean, leak-proof.Ideal for liquids, pastes and granulates.

Capacity NeckInt. diam.

Bodydiam.

Height PK Cat. No.

ml mm mm mm50100250500100015002000

32324050656565

3947637896

109120

7794

119152206226247

50201010441

9.073 5109.073 5119.073 5129.073 5139.073 5149.073 5159.073 516

LLG-Wide-neck jars, glassTwist-off jar, wide-neck. Perfect for sample storage. Glass, clear.Without cap, please order cap separately.Capacity Diam. Height PK Cat. No.

ml mm mm1062123757201062

4863638282

78.080.5

120.5148.0176.0

1212121212

9.070 3019.070 3029.070 3039.070 3049.070 305

Cap for LLG wide-neck jars

Twist-off screw cap for wide-neck jars

Diam. For PK Cat. No.

mm486382

106ml LLG Twist-Off-jar212ml and 375ml LLG Twist-Off-jar720ml and 1062ml LLG Twist-Off-jar

121212

9.070 3069.070 3079.070 308

L A B W A R E

®

L A B W A R E

®

Good quality.

Great value.

Refrigerators - Drawers 18

For more articles see our Laboratory Catalogue from page 698onwards

Spark-free laboratory refrigerator FKEX

Laboratory refrigerator with static cooling and spark-free interior. Designedespecially for storing explosive and highly flammable substances. The interiorsof the FKEX models meet all the safety requirements of the EU Directive94/9EC (ATEX 95). The appliances excel with a large capacity and ruggeddesign. The cooling temperature is continuously adjustable from +2°C to+10°C with the aid of the thermostat integrated in the control panel.

Features:- Flexible, hygienic interior- Glass shelves- Water tray- Lock- Reversible door hinges

Type Capacity External dimensions(W x D x H)

Internal dimensions(W x D x H)

PK Cat. No.

Litres mm mmFKEX 1800FKEX 2600FKEX 3600

180260360

600 x 600 x 886600 x 600 x 1216600 x 600 x 1590

513 x 441 x 734513 x 441 x 1047513 x 441 x 1418

111

9.698 6539.698 6549.698 655

Laboratory refrigerators LKv/LKUv andlaboratory fridge-freezer LCvWherever floor space is limited or under-worktop installation is planned, thelaboratory refrigerators with Comfort electronic controllers are the idealsolution. The range comprises two freestanding (LKv) and two underworktop(LKUv) laboratory refrigerators, in each case with glass door and solid doorversions.Features:- Dynamic cooling system- Precision electronic controller with digital temperature display- Glass door (..12)* with ceiling light (separately switchable)- Convenient, clear view drawers (LCv 4010)- Self-closing door with integrated lock

Security package:- Visual and audible temperature and door alarm- Visual power failure alarm when mains power returns- Integrated data memory with min/max temperatures- Volt-free contact for alarm forwarding to an external remote warning system- RS 485 interface enabling external documentation- Access port for an external temperature sensor- Maximum temperature stability and consistency according to NF X15-140

Temperature range max.:LKv 3912/ LKv 3910/ LKUv 1612/ LKUv 1610: +3... +8°CLCv 4010 fridge part: +3 ... +8°CLCv 4010 freezer part: -30 ... -9°C

Type Capacity External dimensions(W x D x H)

Internal dimensions(W x D x H)

PK Cat. No.

Litres mm mmLKv 3912*LKv 3910LKUv 1612*LKUv 1610LCv 4010 fridgefreezer

360360141141

254/107

600 x 615 x 1840600 x 615 x 1840600 x 615 x 820600 x 615 x 820600 x 615 x 2000

440 x 435 x 1635440 x 435 x 1635440 x 435 x 670440 x 435 x 670440 x 435 x 1105431 x 435 x 597

11111

9.698 6849.698 6839.698 6819.698 6807.627 795

Refrigerator drawers AluCool® includingdividersHigh quality aluminium drawers including frame on smooth-running wheelswith pull-out stop. Includes flexible dividing system with card pockets. Theflexible drawer dividers are pushed directly to the product, saving up to 30%space. With a few simple steps, the flexible dividers are taken out and thedrawer can be cleaned easily and hygienically.

With the AluCool® drawers can be retrofitted at any refrigerator - to save andoptimise valuable space.

Refrigerator internaldimensions (W x D)mm513x441440x435

- space-saving- time-saving- safety - no mix-up

9.698 680

For

FKvLK/LKU/LC

PK Cat. No.

11

9.698 9809.698 981

Cooling systems19

For more articles see our Laboratory Catalogue from page 713,717 onwards

LLG-Laboratory Power Failure Detector

- Alarm is reported immediately visually and acoustically- Reports alarm even for short power outages or for a period of at least12 hours (can be switched off manually)

- Plug safety cover offers protection against accidental pulling the plug- Maximum total power of connected devices. 3500W power supply 230V 50Hz. Max. Rating 16A.

- With built-in battery

Scope of supply:1 power failure detector, 2 plug safety caps and 2 screws

Type PK Cat. No.

LLG-Laboratory Power Failure Detector 1 6.255 819

Cool packs Icecatch®

Icecatch® cool packs for temperature sensitive products used in thepharmaceutical, biotech, medical and food industries. Icecatch® cool packsdistinguish themselves through the following specific features:

- Reliable cold storage through the use of immobilised coolant- For repeat usage due to the use of robust PA/PE film- Disposal with the domestic trash due to the use of non-poisonous ingredients- Unobjectionable use in the pharmaceutical and food industries- Phase transition 0°C

Icecatch®-Gel- Spreading of heat absorption around the 0°C range through the use of

immobilised cooling gel- Optimal price/heat absorption capacity relationship

Icecatch®-Solid- Maximum dimensional stability during the freezing process through the use

of hard foam

Icecatch®-Solid Isolated 2 - 8°C- A perfect cool pack in combination with our System packaging for the +2°C up to +8°C transport

- Maximum dimensional stability during the freezing process through the useof hard foam, coolant and integrated isolation layer

Type Weight Dimensions(W x D x H)

PK Cat. No.

g mmIcecatch®-GelIcecatch®-GelIcecatch®-GelIcecatch®-GelIcecatch®-GelIcecatch®-SolidIcecatch®-SolidIcecatch®-Solid Isolated

90170230460690850

11001100

90 x 110 x 2090 x 150 x 2090 x 180 x 20140 x 190 x 30140 x 240 x 40105 x 230 x 38280 x 190 x 25280 x 190 x 30

12080603222151010

9.695 0009.695 0019.695 0029.695 0039.695 0049.695 0059.695 0069.695 007

9.695 000

9.695 007

Cooling packaging, made of EPS, forIcecatch®-Solid Isolated

This system solution is a combination of a specific EPS Box and the coolingelement Icecatch®-Solid Isolated (Cat-No. 9.695 007). It is the perfect mediumfor the transport of temperature sensitive products in the spectrum of +2°C up to +8°C.In this solution there is no need for a combination of variably preconditioncooling elements. By the use of an easily convertible packaging instruction thepackaging process is simplified and wrong assembly is excluded.

- Easy handling, no ''thawing'', no additional isolation material- Modular system in terms of temperature and run time requirements- Prequalified system solution consisting of the EPS Box and Icecatch®-Solid

Isolated 2°C - 8°C- Immediate availability

Description Dimensions(W x D x H)

Int. dimensions(W x D x H)

PK Cat. No.

mm mmSystem 12.8lSystem 15l/ 22l

365 x 270 x 250670 x 390 x 385

305 x 210 x 200380 x 230 x 175 / 550 x 230 x 175

11

9.695 0219.695 020

9.695 020

L A B W A R E

®

Thermometers 20

For more articles see our Laboratory Catalogue from page 324,331 onwards

Thermometer with fixed penetration probe TDC 200 Pt100- Handy and robust- Large illuminated display- Adjustable limit values; sound and light alarm- Hold- and auto-off function- Exchangeable probe- Fixed probe, pointed- Battery exchangeable

Type Description PK Cat. No.

TDC 200 Pt100 probe thermometer 1 9.908 028

Core Thermometers TTX 100/110

- Fast measurement- Robust and impact resistant, replaceable battery- Factory calibration certificate

SpecificationsMeasuring range: -50 to +350°CAccuracy: ±0.8°C or ±0.8%, with the bigger value

being applicableResolution: 0.1°C from -60°C to + 199°C and 1°C, for

the remaining measuring rangeHousing material: ABSOperating temperature: -20°C to +50°CStorage temperature: -30°C to +70°CReaction time (90%): 5sDimensions: 90mm x 42mm x 17mmBattery life: typical 100 h with uninterrupted useBattery: CR 2032, replaceableCable for TTX 100: Blue silicone cable, diam. 4mm, length 600mmProtection class: IP 55 (DIN EN 13485)Temperature probe TTX 100: Needle diam. 3mm, length 110mm, pointedTemperature probe TTX 110: Needle diam. 3mm, length 90mm, pointed

Type Description PK Cat. No.

TTX 100TTX 110

Fixed probe with cableFixed probe without cable

11

6.231 9956.230 658

6.231 9956.230 658

Digital Thermometer Exact-TempHigh-precision instrument to monitor freezers, blood bank freezers, incubators,climate chambers and ovens.The unbreakable plastic bottle is filled with a special medium to ensureaccurate measurements even at open doors.

- Thermometers traceable to international standards (with certificate ofconformance and accuracy)

- Accuracy: ±0.5°C, resolution 0.1°C- Temperature units: °C or °F- 3 display modes: maximum, minimum and ambient temperature- Alarm function- Alkaline battery (AAA) included- Breakage protected PETG plastic bottles (with 30ml ethylene glycol mixture)- Bottles with magnets attached for easy wall or door mounting- Individual serial numbers- The instruments are available with works certificate on request.

Application Measuringrange

CertifiedTemperature

PK Cat. No.

°C °CFreezersFreezing pointRefrigeratorsIncubators/Water bathsClimate chambers

-50 to 70-50 to 70-50 to 70-50 to 70-50 to 70

-20043721

11111

9.236 7109.236 7119.236 7129.236 7139.236 714

Thermometers, ground glass jointWith fixed immersion (immersion length = lower section + ground joint). WithNS14.5/23 cone. Enclosed-scale type. Translucent glass scale. Upper sectionapprox. 11mm diam., lower section 7.5mm diam. Richter-top finish sealwithout button. Suitable for official calibration. Graduated every 1°C.

Measuringrange

Corpus Immersionlength

Charge PK Cat. No.

°C mm mm colour-10 to +150:1-10 to +150:0.5-10 to +250:1-10 to +360:1-10 to +150:1-10 to +150:0.5-10 to +250:1-10 to +360:1

250350300350250350300350

75757575

100100100100

redredbluegreenredredbluegreen

11111111

9.236 0219.236 0229.236 0239.236 0249.236 0259.236 0269.236 0279.236 028

1

1

2

2

Specifications:Accuracy: ±0.3°C (-20°C...100°C) ±0.5°C (-50°C...-20.1°C

/100.1°C...200°C) ±0.8°C (200.1°C...+300°C)-20°C...+50°COperating Temperature:

Resolution: 0.1°CSample Rate: 2 measurements per secondPower Supply: 2 x type AAAProtection class: IP 65 (DIN EN 13485)Temperature probe: Needle diam. 3 to 6mm, length 100mm

pH- Measuring21

For more articles see our Laboratory Catalogue from page 270,274 onwards

The new inoLab® benchtops are perfectly designed for modern laboratory surroundings. The key pads are clearly outlined and easy-to-operate, their smoothsurfaces are easy-to-clean and the operation is self-explanatory. All meters include a universal power supply and a convenient stand with sensor support. If desiredthey can be ordered in application oriented sets including sensors and accessories.

Laboratory instrument inoLab® pH 7310 Set 4Reliable Documentation for pH measurement.A modern backlit graphic display with menu controlled user interface allows easy and intuitive operation. The mini USB-B interface provides fast datatransfer to a PC. The internal memory can record up to 5000 GLP complyingdata including ID, date and time. The housing and the keypad are easy-to-clean.Up to five calibration points cover almost the complete pH range. A calibrationhistory of the 10 last calibrations allows conclusions on the state of the sensor.An integrated thermal printer (58mm width) is ready for printout of themeasured data (option). Supplied with: meter, pH electrode SenTix® 81, power supply, stand, USB cable and probe.

SpecificationsRanges All values ±1 digitpH: -2.0 … 20.0 ±0.1 pH

-2.00 … 20.00 ±0.01 pH-2.000 … 20.000 ±0.005 pH

mV: ±(1200.0 ±0.3) mV±(2500 ±1) mV

Temperature: -5.0 … 105.0°C ±0.1°CCalibration: 1-, 2-, 3-, 4-, 5 point WTW technical. DIN, NIST and

20 additional buffer setsCalibration memory: Up to 10 calibrations recallableMemory Logger: 500 manually/5000 automaticallyInterface: Mini USB-BPower supply: Universal power supply, 100 to 240V, 50/60 Hz, 4 x

1.5V AA or 4 x 1.2V NiMH

Type Description PK Cat. No.

pH 7310 Set 4 Meter incl. SenTix® 81 andaccessories

1 9.920 102

LLG-pH-indicator paper, rolls

For the determination of pH values.

Range PK Cat. No.

pH1 - 111 - 14

11

9.129 8009.129 802

Laboratory instrument inoLab® Multi 9310 IDS Set CThe Multi 9310 IDS features a new technology: the meter does not determinethe parameter any longer; now this is done by the sensor. Intelligent, digitalIDS sensors promotes the inoLab® Multi 9310 IDS to a perfect all-rounder. No matter whether pH, conductivity or dissolved oxygen, when plugged into asuitable sensor the inoLab® Multi 9310 becomes either a pH, conductivity ordissolved oxygen meter. The internal memory can record up to 5000 GLPcomplying data including ID, date and time.

A strong partner in the laboratory: The new inoLab® Multi 9310 IDS isextremely versatile and supports automatically GLP and AQA. An optional useradministration can be used for securing and tracing of results.

Plug and measure: The intelligent digital IDS sensors do the signalprocessing and transfer a safe digital signal to the meter including calibrationdata, serial number, and sensors description. The unique QSC-function allowsprecise conclusions of the actual pH electrode condition. The CMC functionsupports correct measurements within the calibrated range. The inoLab® Multi 9310 IDS works with all IDS sensors for pH, conductivity,ORP, dissolved oxygen (optical sensor).

Supplied with: instrument (Multi 9310), pH-electrode SenTix® 940,conductivity-electrode TetraCon® 925, buffer (4; 7; 10.01), conductivitystandard (0.01 ml/ 1 KCL), power supply, stand and USB cable.

Specifications:Parameters: pH, mV, dissolved oxygen, conductivity, temperatureDisplay: graphic LCD, backlitMemory: 500 manually/5000 automatically

Logger: manual/time controlledInterface: Mini USB-B

Type Description PK Cat. No.

Multi 9310 Set C Incl. SenTix® 940, TetraCon® 925 andaccessories

1 9.920 125

LLG-pH-Indicator paper stripsRange Description PK Cat. No.

pH0 - 110 - 140 - 140 - 14

pad of 100 stripspad of 100 strips50 strips per pack100 strips per pack

10010050

100

9.129 8049.129 8059.129 8069.129 807

1

1

2

2

Liquid Handling 22

For more articles see our Laboratory Catalogue from page 876,902, 1194 onwards

Acura® 825 manual - digital reading micropipettors

The latest Acura® manual pipette line was built with the same attention todetail that made the brand famous over several instrument generations.Introducing a smooth, modern design with easy volume reading. It alsofeatures a number of innovations enabling safe and easy, high performancepipetting.

The Acura® line features:- Effortless activation- Smart and reliable volume adjustment- Precision digital display visible at all times- Justip™ adjustable tip ejector fitting most tips- Swift-set user calibration system- Shock, UV-light and autoclaving resistance- CE certified IVD 98/79 EEC- Three-year warranty

Capacity Accuracy≤ ± A%(min.vol.)

Accuracy≤ ± A%

(max.vol.)

Repro-ducibility≤ ± V%(min.vol.)

Reproducibility≤ ± V%

(max. vol.)

PK Cat. No.

µl0.1 to 20.5 to 101 to 102 to 205 to 5010 to 10020 to 200100 to 1000

6.02.52.52.51.51.51.51.5

2.01.01.01.01.00.80.60.5

5.01.82.51.71.01.00.60.5

1.50.50.70.50.40.20.20.2

11111111

9.411 5909.411 5919.411 5929.411 5939.411 5949.411 5959.411 5969.411 597

LLG-Low retention filter tips for digitalMicroliter pipettors

Certified free of DNase, RNase, suitable for microbiology. Guaranteed metal-free. CE-certified for In-Vitro-Diagnostics acc. to 98/79/EC. Sterility acc. to EN552/ISO 11137 and DIN EN 556.

Sterile. Filter pore size (effective) 4 to 6µm.Also liquid handling accuracy and precision are crucial to success in today’smolecular biology laboratories, especially for DNA analysis and proteinhandling. A significant culprit of pipette inaccuracy is binding of sample. TheLLG ULR-tips reduce the binding, thus increasing sample delivery accuracy.Tests demonstrate that LLG ULR-Tips significantly reduce the amount of DNAand protein bound by the tip. Furthermore LLG ULR-Filter Tips offer a markedimprovement over the best low retention technologies.

Capacity Colour Type PK Cat. No.

µl0.1 to 1001 to 201 to 1001 to 200100 to 1000

ClearClearClearClearClear

10 racks of 9610 racks of 9610 racks of 9610 racks of 9610 racks of 96

960960960960960

9.409 0339.409 0349.409 0359.409 0369.409 037

Microcentrifuge tubes, PP, with lid closure

PLASTIBRANDThese new 1.5ml microcentrifuge tubes are available with an additional lidclosure to achieve especially effective sealing and prevent accidental opening.- Autoclavable at 121°C and 2 bar (DIN EN 285)- Centrifugable up to 30.000xg- Free of RNase, DNase, DNA and endotoxins- Produced under cleanroom conditions, ISO 14 644-1, Class 8- Made from high-quality medical-grade polypropylene- Subdivisions at 0.1, 0.5, 1.0, and 1.5ml- Frosted labeling surfaces on the lid and tube

Type PK Cat. No.

Microcentrifuge tubes with lid closure 1000 6.257 318

L A B W A R E

®

Consumables23

For more articles see our Laboratory Catalogue from page 137,218, 1083 onwards

Labels Tough-Tags, rollsTemperature resistant from -40°C to +121°C. Tough-Tags resist boiling waterbaths, autoclaving and moderate freezer temperatures. Chemically inert labelsresist most organic solvents and caustic agents. They adhere to most plastics,glass and metals without cracking, peeling and degrading. Tubes are pre-cut, peel-off labels which accept many marking instruments.They are perfectly sized to fit microcentrifuge tubes and other containers inthe laboratory. Tubes labeled with Tough-Tags easily slide in and out ofcentrifuge rotors without binding.Dimensions (L x W): For vessels:24 x 13mm 0.5ml tubes33 x 13mm 1.5/2.0ml tubes38 x 6mm Microplates21 x 7mm PCR tubes38 x 19mm General application

Dimensions(W x D)

Colour PK Cat. No.

mm24 x 1324 x 1324 x 1324 x 1324 x 1333 x 1333 x 1333 x 1333 x 1333 x 1338 x 621 x 738 x 19

WhiteBlueGreenRedYellowWhiteBlueGreenRedYellowWhiteWhiteWhite

1000100010001000100010001000100010001000100015001000

9.100 0459.100 0469.100 0479.100 0489.100 0499.100 0409.100 0419.100 0429.100 0439.100 0449.100 0509.100 0519.100 052

LLG-Lab NotebookFor recording research data, experimental procedures, and design ideas. Usethese notebooks to keep your information safe and well organised. Numbered,acid-free, grid pages include spaces for title, project number, book number,date, and witness signature. Lined notebooks feature college ruled pages foreasy report writing. Covers are waterproof and chemical-resistant. Allnotebooks contain periodic and conversion tables in the back. Admissible ascourt evidence when used as prescribed by law. Measures: 218mm x 281mm.

Description Type Colour PK Cat. No.

100 pages200 pages200 pages

gridgridlined

blackbluered

111

9.050 7509.050 7519.050 752

Brushes, natural bristleType Diam. Length PK Cat. No.

mm mmPipette brushPipe cleanerReagent bottle brush with wool tipReagent bottle brush with head bundleReagent bottle brush with wool tipReagent bottle brush with wool tipErlenmeyer flask and bottlebrush with head bundleErlenmeyer flask and bottlebrush with head bundleBeaker brush with wooden handleBeaker brush with wooden handleBeaker brush with wooden handleBeaker brush with extralong wooden handleRinsing brush*Burette brush with 1m longwire handle

54

10

10

15

30

50

63

85

85

80

80

6030

480150190

250

280

270

340

470

390

430

430

630

2201000

1100

1

1

1

1

1

1

1

1

1

1

11

9.019 0109.019 0059.019 020

9.019 030

9.019 035

9.019 040

9.019 050

9.019 060

9.019 070

9.019 080

9.019 090

9.019 092

9.019 1109.019 100

* Nylon

QuickFix plaster dispenserPull and you immediately have a plaster ready for use. Each plaster isindividually packed. This provides great hygienic safety. Ready for use atcritical workplaces. The plasters are made of protective, low-allergenic, PE material that allows the skin to breathe and are especially suitable fordamp workplaces.The QuickFix dispenser is only 23cm wide and 13.5cm high. It contains 90 plasters in spite of its modest size so it can be installed precisely in thoseplaces where the need is greatest.Refilling of the dispenser is also possible with other types of the QuickFixrange.

Description PK Cat. No.

QuickFix plaster dispenser including twowater-resistant plaster refillsQuickFix water resistant plaster refillcontaining 45 plasters

1

1

9.733 808

9.733 809

9.019 010

9.019 005

9.019 030

9.019 035

9.019 070 9.019 110

Package Dispenser ripette® proMechanical series dispenser allows selection and dispensing through a vision panel

Flexible: With the Ripette pro you can work flexibly and practically with 12 tip sizes, 10 volume adjustments and 120 program steps.Clear: Volume adjustments and dosing volumes for different tips are shown in a vision panel on the Ripette pro.Handy: A perfect ergonomic design makes an easy and comfortable use possible. With the easy-moving dosing button in combination with the low weight, longdosing series can be dispensed conveniently.Compatible: The Ripette pro is compatible not only with PD-tips from Brand but also with combitips and combitips plus from Eppendorf and has been preciselyaligned to Ritips professional from Ritter.Independent: In addition to the handy design, the Ripette pro has been constructed consistent mechanical. The Ripette pro is maintenance-free and does notneed any additional resources such as power supply or batteries.

Every device is tested in terms of functionality and precision after production. Only after the requirements of DIN EN ISO 8655 have been fulfilled, a serialnumber will be issued.

Product equipment in line with this special offer: ripette® pro + one starter pack with each 5 pieces of ritips® 0.05ml; 1.25ml, 12.5ml and ritips® professional0.1ml; 0.2ml; 0.5ml; 1.0ml; 2.5ml; 5.0ml; 10ml; 25ml and 50ml as well as one adapter.

Type PK Cat. No.

ripette® pro 1 6.257 524

ritips®

ritips®pro

Starter pack for free

+

All prices exclusive VAT or other local taxes. Prices valid until 30.06.2013. E & OE.