Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
LN2600 Rugged Security Router
Modified: 2018-06-11
Copyright © 2018, Juniper Networks, Inc.
Juniper Networks, Inc.1133 InnovationWaySunnyvale, California 94089USA408-745-2000www.juniper.net
Juniper Networks, the Juniper Networks logo, Juniper, and Junos are registered trademarks of Juniper Networks, Inc. and/or its affiliates inthe United States and other countries. All other trademarks may be property of their respective owners.
Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify,transfer, or otherwise revise this publication without notice.
LN2600 Rugged Security RouterCopyright © 2018 Juniper Networks, Inc. All rights reserved.
The information in this document is current as of the date on the title page.
YEAR 2000 NOTICE
Juniper Networks hardware and software products are Year 2000 compliant. Junos OS has no known time-related limitations through theyear 2038. However, the NTP application is known to have some difficulty in the year 2036.
ENDUSER LICENSE AGREEMENT
The Juniper Networks product that is the subject of this technical documentation consists of (or is intended for use with) Juniper Networkssoftware. Use of such software is subject to the terms and conditions of the End User License Agreement (“EULA”) posted athttps://www.juniper.net/support/eula/. By downloading, installing or using such software, you agree to the terms and conditions of thatEULA.
Copyright © 2018, Juniper Networks, Inc.ii
Table of Contents
About the Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
Documentation and Release Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
Supported Platforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
Documentation Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
Documentation Feedback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi
Requesting Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii
Self-Help Online Tools and Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . xii
Opening a Case with JTAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii
Part 1 Overview
Chapter 1 Router Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
LN2600 Rugged Security Router Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
LN2600 Rugged Security Router Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Rugged Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Ethernet Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
RJ-45 Console Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
USB Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Tamper-Evident Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Tamper-Proof Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Enhanced Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Chapter 2 Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
LN2600 Router Front Panel Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
LN2600 Router Status LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Part 2 Planning
Chapter 3 Planning and Preparing the Site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Before You Install the LN2600 Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
LN2600 Router Environmental Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
LN2600 Router Physical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Chapter 4 Planning Power Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
LN2600 Router Power Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Part 3 Safety
Chapter 5 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Definition of Safety Warning Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Safety Warnings for the LN2600 Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Safety Guidelines for the LN2600 Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
iiiCopyright © 2018, Juniper Networks, Inc.
Chapter 6 Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Agency Approvals and Compliance Statements for the LN2600 Router . . . . . . . 25
Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Part 4 Installation
Chapter 7 Unpacking the Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Unpacking the LN2600 Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Inspecting the Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Parts Inventory (Packing List) for the LN2600 Router . . . . . . . . . . . . . . . . . . . . . . 32
Chapter 8 Installing the Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Installing the LN2600 Router Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Mounting the LN2600 Router on the Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Mounting the LN2600 Router on the Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Chapter 9 Connecting the Router to Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Powering on the LN2600 Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Chapter 10 Installing Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Installing the SFP Transceiver in the LN2600 Router . . . . . . . . . . . . . . . . . . . . . . . 51
Weatherproofing the LN2600 Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Part 5 Maintenance
Chapter 11 Packing and Returning Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Information You Might Need to Supply to JTAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Packing Instructions for Returning an LN2600 Router . . . . . . . . . . . . . . . . . . . . . . 61
Chapter 12 Replacing Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Removing the LN2600 Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Removing the SFP Transceiver from the LN2600 Router . . . . . . . . . . . . . . . . . . . 64
Part 6 Troubleshooting
Chapter 13 Troubleshooting Router Boot-Up and Operation . . . . . . . . . . . . . . . . . . . . . . 69
Accelerating the LN Series Router Boot-Up Process . . . . . . . . . . . . . . . . . . . . . . . 69
Accessing the LN Series Router BOOT> Prompt . . . . . . . . . . . . . . . . . . . . . . . 70
Disabling or Enabling POST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Disabling POST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Enabling POST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Disabling or Enabling File System Cleanup . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Disabling File System Cleanup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Enabling File System Cleanup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Removing Temporary IDP Package Installation Files . . . . . . . . . . . . . . . . . . . . 75
Diagnostic Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Chapter 14 Contacting Customer Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Contacting Customer Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Copyright © 2018, Juniper Networks, Inc.iv
LN2600 Rugged Security Router
List of Figures
Part 1 Overview
Chapter 1 Router Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Figure 1: LN2600 Rugged Security Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Figure 2: Tamper-Evident Seal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Figure 3: Tamper-Proof Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Chapter 2 Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Figure 4: LN2600 Router Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Figure 5: LN2600 Router Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Part 2 Planning
Chapter 3 Planning and Preparing the Site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Figure 6: LN2600 Router Physical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Part 3 Safety
Chapter 6 Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Figure 7: LN2600 Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Part 4 Installation
Chapter 8 Installing the Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Figure 8: LN2600 Router with Heat Sink Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Figure 9: LN2600 Router with Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Figure 10: LN2600 Router with Grounding Lug . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Figure 11: LN2600 Router in the Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Figure 12: LN2600 Router Screw Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Figure 13: LN2600 Router on the Wall-Mounting Unit . . . . . . . . . . . . . . . . . . . . . . 42
Figure 14: Grounding Points on the LN2600 Router . . . . . . . . . . . . . . . . . . . . . . . . 43
Chapter 9 Connecting the Router to Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Figure 15: Dual DC Power Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Chapter 10 Installing Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Figure 16: Small Form-Factor Pluggable (SFP) . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Figure 17: Installing the SFP Transceiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Figure 18: LN2600 Router Cable Management System . . . . . . . . . . . . . . . . . . . . . 54
Figure 19: LN2600Router CableManagement Systemwith Interface andPower
Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Figure 20: LN2600 Router with Top Cover Panel Open . . . . . . . . . . . . . . . . . . . . . 55
Figure 21: LN2600 Router with Interface Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
vCopyright © 2018, Juniper Networks, Inc.
Figure 22: LN2600 Router Interface Cables Wrapped in Hose Bag . . . . . . . . . . . . 56
Figure 23: LN2600 Router Interface Cables Protected with Hose Bag . . . . . . . . . 57
Part 5 Maintenance
Chapter 12 Replacing Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Figure 24: Small Form-Factor Pluggable (SFP) . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Copyright © 2018, Juniper Networks, Inc.vi
LN2600 Rugged Security Router
List of Tables
About the Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
Table 1: Notice Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
Table 2: Text and Syntax Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
Part 1 Overview
Chapter 2 Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Table 3: LN2600 Router Faceplate LEDs Status . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Table 4: LN2600 Router Status LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Part 2 Planning
Chapter 3 Planning and Preparing the Site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Table 5: LN2600 Router Environmental Specifications . . . . . . . . . . . . . . . . . . . . . 13
Table 6: LN2600 Router Physical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Chapter 4 Planning Power Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Table 7: LN2600 Router Power Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Part 3 Safety
Chapter 5 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Table 8: Notice Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Part 4 Installation
Chapter 7 Unpacking the Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Table 9: Parts List for the LN2600 Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Table 10: Parts List for the Rack-Mounting Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Table 11: Parts List for the Wall-Mounting Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
viiCopyright © 2018, Juniper Networks, Inc.
Copyright © 2018, Juniper Networks, Inc.viii
LN2600 Rugged Security Router
About the Documentation
• Documentation and Release Notes on page ix
• Supported Platforms on page ix
• Documentation Conventions on page ix
• Documentation Feedback on page xi
• Requesting Technical Support on page xii
Documentation and Release Notes
To obtain the most current version of all Juniper Networks®technical documentation,
see the product documentation page on the Juniper Networks website at
https://www.juniper.net/documentation/.
If the information in the latest release notes differs from the information in the
documentation, follow the product Release Notes.
Juniper Networks Books publishes books by Juniper Networks engineers and subject
matter experts. These books go beyond the technical documentation to explore the
nuances of network architecture, deployment, and administration. The current list can
be viewed at https://www.juniper.net/books.
Supported Platforms
For the features described in this document, the following platforms are supported:
• LN2600
Documentation Conventions
Table 1 on page x defines notice icons used in this guide.
ixCopyright © 2018, Juniper Networks, Inc.
Table 1: Notice Icons
DescriptionMeaningIcon
Indicates important features or instructions.Informational note
Indicates a situation that might result in loss of data or hardware damage.Caution
Alerts you to the risk of personal injury or death.Warning
Alerts you to the risk of personal injury from a laser.Laser warning
Indicates helpful information.Tip
Alerts you to a recommended use or implementation.Best practice
Table 2 on page x defines the text and syntax conventions used in this guide.
Table 2: Text and Syntax Conventions
ExamplesDescriptionConvention
To enter configuration mode, type theconfigure command:
user@host> configure
Represents text that you type.Bold text like this
user@host> show chassis alarms
No alarms currently active
Represents output that appears on theterminal screen.
Fixed-width text like this
• A policy term is a named structurethat defines match conditions andactions.
• Junos OS CLI User Guide
• RFC 1997,BGPCommunities Attribute
• Introduces or emphasizes importantnew terms.
• Identifies guide names.
• Identifies RFC and Internet draft titles.
Italic text like this
Configure themachine’s domain name:
[edit]root@# set system domain-namedomain-name
Represents variables (options for whichyou substitute a value) in commands orconfiguration statements.
Italic text like this
Copyright © 2018, Juniper Networks, Inc.x
LN2600 Rugged Security Router
Table 2: Text and Syntax Conventions (continued)
ExamplesDescriptionConvention
• To configure a stub area, include thestub statement at the [edit protocolsospf area area-id] hierarchy level.
• Theconsoleport is labeledCONSOLE.
Represents names of configurationstatements, commands, files, anddirectories; configurationhierarchy levels;or labels on routing platformcomponents.
Text like this
stub <default-metricmetric>;Encloses optional keywords or variables.< > (angle brackets)
broadcast | multicast
(string1 | string2 | string3)
Indicates a choice between themutuallyexclusive keywords or variables on eitherside of the symbol. The set of choices isoften enclosed in parentheses for clarity.
| (pipe symbol)
rsvp { # Required for dynamicMPLS onlyIndicates a comment specified on thesame lineas theconfiguration statementto which it applies.
# (pound sign)
community namemembers [community-ids ]
Encloses a variable for which you cansubstitute one or more values.
[ ] (square brackets)
[edit]routing-options {static {route default {nexthop address;retain;
}}
}
Identifies a level in the configurationhierarchy.
Indention and braces ( { } )
Identifies a leaf statement at aconfiguration hierarchy level.
; (semicolon)
GUI Conventions
• In the Logical Interfaces box, selectAll Interfaces.
• To cancel the configuration, clickCancel.
Representsgraphicaluser interface(GUI)items you click or select.
Bold text like this
In the configuration editor hierarchy,select Protocols>Ospf.
Separates levels in a hierarchy of menuselections.
> (bold right angle bracket)
Documentation Feedback
We encourage you to provide feedback, comments, and suggestions so that we can
improve the documentation. You can provide feedback by using either of the following
methods:
• Online feedback rating system—On any page of the Juniper Networks TechLibrary site
at https://www.juniper.net/documentation/index.html, simply click the stars to rate the
content, anduse thepop-up formtoprovideuswith informationabout your experience.
Alternately, you can use the online feedback form at
https://www.juniper.net/documentation/feedback/.
xiCopyright © 2018, Juniper Networks, Inc.
About the Documentation
• E-mail—Sendyourcommentsto [email protected]. Includethedocument
or topic name, URL or page number, and software version (if applicable).
Requesting Technical Support
Technical product support is available through the JuniperNetworksTechnicalAssistance
Center (JTAC). If you are a customer with an active J-Care or Partner Support Service
support contract, or are covered under warranty, and need post-sales technical support,
you can access our tools and resources online or open a case with JTAC.
• JTAC policies—For a complete understanding of our JTAC procedures and policies,
review the JTAC User Guide located at
https://www.juniper.net/us/en/local/pdf/resource-guides/7100059-en.pdf.
• Product warranties—For product warranty information, visit
https://www.juniper.net/support/warranty/.
• JTAC hours of operation—The JTAC centers have resources available 24 hours a day,
7 days a week, 365 days a year.
Self-Help Online Tools and Resources
For quick and easy problem resolution, Juniper Networks has designed an online
self-service portal called the Customer Support Center (CSC) that provides youwith the
following features:
• Find CSC offerings: https://www.juniper.net/customers/support/
• Search for known bugs: https://prsearch.juniper.net/
• Find product documentation: https://www.juniper.net/documentation/
• Find solutions and answer questions using our Knowledge Base: https://kb.juniper.net/
• Download the latest versions of software and review release notes:
https://www.juniper.net/customers/csc/software/
• Search technical bulletins for relevant hardware and software notifications:
https://kb.juniper.net/InfoCenter/
• Join and participate in the Juniper Networks Community Forum:
https://www.juniper.net/company/communities/
• Open a case online in the CSC Case Management tool: https://www.juniper.net/cm/
Toverify serviceentitlementbyproduct serial number, useourSerialNumberEntitlement
(SNE) Tool: https://entitlementsearch.juniper.net/entitlementsearch/
Opening a Casewith JTAC
You can open a case with JTAC on theWeb or by telephone.
• Use the Case Management tool in the CSC at https://www.juniper.net/cm/.
• Call 1-888-314-JTAC (1-888-314-5822 toll-free in the USA, Canada, and Mexico).
Copyright © 2018, Juniper Networks, Inc.xii
LN2600 Rugged Security Router
For international or direct-dial options in countries without toll-free numbers, see
https://www.juniper.net/support/requesting-support.html.
xiiiCopyright © 2018, Juniper Networks, Inc.
About the Documentation
Copyright © 2018, Juniper Networks, Inc.xiv
LN2600 Rugged Security Router
PART 1
Overview
• Router Overview on page 3
• Components on page 7
1Copyright © 2018, Juniper Networks, Inc.
Copyright © 2018, Juniper Networks, Inc.2
LN2600 Rugged Security Router
CHAPTER 1
Router Overview
• LN2600 Rugged Security Router Description on page 3
• LN2600 Rugged Security Router Features on page 4
LN2600 Rugged Security Router Description
The Juniper Networks LN2600 Rugged Security Router is an embedded security router
that operates in both wire-line and wireless environments with communication nodes
that are eithermobile or stationary. The LN2600 router provides reliable and securedata,
voice, and video services. The LN2600 router is a high-performance router with security
features that includes firewall, encryption, and intrusion prevention system in a fanless,
ventless, and water-resistant system capable of effortlessly performing in extreme
temperatures and harsh environments. The LN2600 router can be installed as a
rack-mountable or wall-mountable chassis.
Figure 1: LN2600 Rugged Security Router
WARRANTY
VOID IFREMOVE
D
3—1— LatchTop cover panel
4—2— Status LEDBottom cable management unit
The LN2600 router can be used effectively in the following environments:
• Energy and utility companies, such as Smart Grid
• Mission critical infrastructure companies, such as electricity, oil, gas and water
infrastructures
• Public sector safety organizations, such as first responders
• Military and defense establishments that require secure and reliable routing solutions
on the go
3Copyright © 2018, Juniper Networks, Inc.
• Transportation including rail and subways
• Industrial andmanufacturing facilities
RelatedDocumentation
LN2600 Rugged Security Router Features on page 4•
• Installing the LN2600 Router Overview on page 35
LN2600 Rugged Security Router Features
• Rugged Chassis on page 4
• Ethernet Ports on page 4
• RJ-45 Console Port on page 4
• USB Port on page 4
• Tamper-Evident Seals on page 5
• Tamper-Proof Lock on page 5
• Enhanced Memory on page 5
Rugged Chassis
The LN2600 router is a fanless and ventless router. These features make the LN2600
router very sturdy. All interfaces and cabling are on one side of the chassis, and are well
protected by a sealed plexiglass cover. The LN2600 router meets the International
Protection profile (IP-64) for dust proof and water splash proof environments.
Ethernet Ports
The LN2600 router supports eight ports of Gigabit Ethernet small form-factor pluggable
transceiver (SFP) traffic with up to 1024 logical interfaces (see Figure 4 on page 7). The
router supports most Layer 2 and Layer 3 protocols, route redistribution, tunneling,
multicast, routine quality of service (QoS), and security.
The eight gigabit Ethernet ports on the LN2600 router are 1000Base-X interfaces (SX,
LX, and T options) with autonegotiation on by default. All the eight SFP transceivers on
the LN2600 router must be industrial-hardened versions (maximum 80° C).
RJ-45 Console Port
The LN2600 router supports one RJ-45 console port receptacle that accepts an RJ-45
cable (see Figure 4 on page 7) to connect the router to an auxiliary or console
management device. You can use the console port on the device to connect to the device
through an RJ-45 serial cable. From the console port, you can use the CLI to configure
the device. By default, the console port is enabled.
USB Port
The LN2600 router supports one removable media interface through which you can
install the Junos OS.
Copyright © 2018, Juniper Networks, Inc.4
LN2600 Rugged Security Router
Tamper-Evident Seals
Two tamper-evident seals are affixed to the sides of the router to show evidence of
tamperingwith the router’s internal components. Two red color seals are placed on each
sides of the LN2600 router chassis.
Figure 2: Tamper-Evident Seal
WARRANTY
VOID IFREMOVE
D
1—Tamper-evident seal
WARNING: If any of these seals are removed or peeled off the router, theremay have been an attempt to break open the router, compromising theintegrity of the router, which voids the router’s warranty.
Tamper-Proof Lock
The LN2600 router comes with a front protective cover that can be secured with a lock.
The front protective cover closed and secured with locks ensures unwanted tampering
of the input and power chords. You can lock the LN2600 router at three different places
for enhanced security.
Figure 3: Tamper-Proof Lock
WARRANTY
VOID IFREMOVE
D
1—Protective lock
EnhancedMemory
The LN2600 router comes with 2 GB of RAM and 4 GB of flash memory for faster
processing.
RelatedDocumentation
• LN2600 Rugged Security Router Description on page 3
5Copyright © 2018, Juniper Networks, Inc.
Chapter 1: Router Overview
• LN2600 Router Status LED on page 8
• LN2600 Router Front Panel Overview on page 7
Copyright © 2018, Juniper Networks, Inc.6
LN2600 Rugged Security Router
CHAPTER 2
Components
• LN2600 Router Front Panel Overview on page 7
• LN2600 Router Status LED on page 8
LN2600 Router Front Panel Overview
TheLN2600 router is designed so that it canbeaccessedonly fromthe front of the router
chassis. All the interface ports including the power inputs are located in the front of the
LN2600 router. All the cables are arranged in the cable management system, which
protects them from extreme weather conditions.
Figure 4: LN2600 Router Front Panel
CONSOLELN2600
6—1— DC power inputAUSB port
7—2— DC power input BACT and Link LEDs
8—3— Power LED - DC power input BGigabit Ethernet SFP ports
9—4— Status LED portRJ-45 console port
5—Power LED - DC power inputA
The front panel of an LN2600 router consists of the following components:
• Eight Gigabit Ethernet SFP ports
• One console port
• One USB port for upgrading Junos OS
• Two DC power input ports, labeled A and B
• LEDs
RelatedDocumentation
LN2600 Rugged Security Router Features on page 4•
• LN2600 Router Status LED on page 8
7Copyright © 2018, Juniper Networks, Inc.
LN2600 Router Status LED
The LN2600 router includes LEDs on the front panel to provide status information.
Figure 5: LN2600 Router Front Panel
CONSOLELN2600
6—1— DC power input port AUSB port
7—2— DC power input port BACT and Link LEDs
8—3— Power LED - DC power input BEthernet port
9—4— Status LED portRJ-45 console port
5—Power LED - DC power inputA
Table 3 on page 8 provides information on the LEDs present on the faceplate of the
LN2600 router.
Table 3: LN2600 Router Faceplate LEDs Status
MeaningColorLED
Power is off.Off; No colorA
BReady for operation.
The router is powered on and has aproper power supply.
Steady green
No link on associated port.Off; No colorLINK
On; link established.Steady green
No activity.Off; No colorACT
Traffic activity.Blinking green
On initial power-on, the components of the router run boot code, go through a series of
self-diagnostic tests, and synchronizewith each other.When the tests are complete, use
the status LED on the router front panel to determine the status of the router.
Table 4 on page 8 provides information about the status LED located on the top cable
cover of the LN2600 router. Figure 1 on page 3 shows the position of the status LED on
the LN2600 router.
Table 4: LN2600 Router Status LED
MeaningStatus LED Color
Power is off.Off; No color
Copyright © 2018, Juniper Networks, Inc.8
LN2600 Rugged Security Router
Table 4: LN2600 Router Status LED (continued)
MeaningStatus LED Color
Error condition.Steady red
Ready for operation. The router is powered on and has successfully booted and runSPOST and POST diagnostics.
Steady green
Powering on and then running SPOST and POST diagnostics, or running individualdiagnostics, or performing an upgrade.
Blinking green
NOTE: The status LED on Initial power-onmay briefly flash red color whilerunning the diagnostic tests.
RelatedDocumentation
• Diagnostic Tests on page 75
• LN2600 Router Front Panel Overview on page 7
9Copyright © 2018, Juniper Networks, Inc.
Chapter 2: Components
Copyright © 2018, Juniper Networks, Inc.10
LN2600 Rugged Security Router
PART 2
Planning
• Planning and Preparing the Site on page 13
• Planning Power Requirements on page 17
11Copyright © 2018, Juniper Networks, Inc.
Copyright © 2018, Juniper Networks, Inc.12
LN2600 Rugged Security Router
CHAPTER 3
Planning and Preparing the Site
• Before You Install the LN2600 Router on page 13
• LN2600 Router Environmental Specifications on page 13
• LN2600 Router Physical Specifications on page 14
Before You Install the LN2600 Router
Before installing the LN2600 router, be sure you have:
• A 3/32 Allen wrench with a torque of 5 lb-in (0.56 Nm).
• Phillips (+) screwdriver with a minimum shaft length of 6 inches (150mm)
• 2.5-mm slotted screwdriver
• T10 Torx and 7mm nut driver
• 3/8-in ratchet driver
• Copper or fiber-optic Ethernet cables (up to eight for each router)
• SFP and the RJ-45 Console cables
• An electrostatic discharge (ESD) grounding strap
• Power supply of -48 VDC
• Rack-mounting and the wall-mounting kits (optional)
RelatedDocumentation
LN2600 Rugged Security Router Description on page 3•
• Installing the LN2600 Router Overview on page 35
LN2600 Router Environmental Specifications
Table 5 on page 13 provides the required environmental conditions for normal router
operation.
Table 5: LN2600 Router Environmental Specifications
ValueDescription
13,123 ft (4,000m)Altitude
13Copyright © 2018, Juniper Networks, Inc.
Table 5: LN2600 Router Environmental Specifications (continued)
Normal operation ensured in relative humidity range of 0% to 95%,noncondensing
Relative humidity
−40° C through 71° C (−40° F through 160° F)Continuous operating temperature
Less than -40° C or greater than 71° CIndustrial grade SFP temperature
RelatedDocumentation
LN2600 Rugged Security Router Features on page 4•
LN2600 Router Physical Specifications
Figure 6: LN2600 Router Physical Specifications
231.2 mm(9.1 in.)
73.6mm(2.9 in.)
43.7 mm(1.72 in.)
304.8mm(12 in.)
444.5mm(17.5 in.)
g007654
Table 6 on page 14 provides the physical specifications of the LN2600 router.
Table 6: LN2600 Router Physical Specifications
SpecificationCategory
444.5 mm (17.5 inches)Width
43.68mm (1.72 inches)Height
304.8 mm (12 inches)Depth
19 inches rack-mount or wall-mountMounting
6.8 kg (15 lb)
9.5 kg (21 lb) with rack-mount kit
19.5 kg (42 lb) with wall-mount kit
Weight
Copyright © 2018, Juniper Networks, Inc.14
LN2600 Rugged Security Router
RelatedDocumentation
• LN2600 Rugged Security Router Features on page 4
15Copyright © 2018, Juniper Networks, Inc.
Chapter 3: Planning and Preparing the Site
Copyright © 2018, Juniper Networks, Inc.16
LN2600 Rugged Security Router
CHAPTER 4
Planning Power Requirements
• LN2600 Router Power Requirements on page 17
LN2600 Router Power Requirements
Table 7 on page 17 lists the power requirements for the LN2600 router.
Table 7: LN2600 Router Power Requirements
SpecificationsCategory
-48 VDCInput voltage
1.25 A@ -48 VDCInput current
60WMaximum power dissipation
RelatedDocumentation
• Powering on the LN2600 Router on page 45
17Copyright © 2018, Juniper Networks, Inc.
Copyright © 2018, Juniper Networks, Inc.18
LN2600 Rugged Security Router
PART 3
Safety
• Safety Information on page 21
• Compliance on page 25
19Copyright © 2018, Juniper Networks, Inc.
Copyright © 2018, Juniper Networks, Inc.20
LN2600 Rugged Security Router
CHAPTER 5
Safety Information
• Definition of SafetyWarning Levels on page 21
• SafetyWarnings for the LN2600 Router on page 22
• Safety Guidelines for the LN2600 Router on page 23
Definition of SafetyWarning Levels
The documentation uses the following levels of safety warnings:
Table 8: Notice Icons
DescriptionMeaningIcon
Indicates important features or instructions.Informational note
Indicates a situation that might result in loss of data or hardware damage.Caution
Alerts you to the risk of personal injury or death.Warning
Alerts you to the risk of personal injury from a laser.Laser warning
Indicates helpful information.Tip
Alerts you to a recommended use or implementation.Best practice
RelatedDocumentation
SafetyWarnings for the LN2600 Router on page 22•
• Safety Guidelines for the LN2600 Router on page 23
21Copyright © 2018, Juniper Networks, Inc.
SafetyWarnings for the LN2600 Router
• The hardware equipment is intended for installation in restricted access areas. A
restricted access area is one to which access can be gained only by service personnel
through the use of a special tool, lock and key, or other means of security, and which
is controlled by the authority responsible for the location.
• The DC-powered router is equipped with a DC power connector that is rated for the
power requirements of a maximally configured router. To supply sufficient power,
terminate the DC input wiring on a facility DC source capable of supplying at least 2 A
@ –48 VDC per input for each power supply.
• The DC power input port is Type 8 as described in GR-1089-CORE, Issue 6.
• Incorporate an easily accessible disconnect device into the facility wiring. We
recommend that the48VDC facilityDCsourcebeequippedwith a circuit breaker rated
between 6.25 A to 10 A@ 48 VDC, or as required by local code. In the United States
and Canada, the 48 VDC facility should be equipped with a circuit breaker rated a
minimumof 125%of thepowerprovisioned for the input inaccordancewith theNational
Electrical Code in the US and the Canadian Electrical Code in Canada. A readily
accessible disconnect device should be incorporated external to the device.
• Primary overcurrent protection is provided by the building circuit breaker. This breaker
should protect against excess currents, short circuits, and earth faults in accordance
with NEC ANSI/NFPA70.
• The LN2600 router has more than one power source. Ensure proper care while
connecting theDCpower supply to the router. The following label provides thewarning
of the dual power source:
This unit has morethan one power source
• Some parts of the LN2600 router might become hot. The following label provides the
warning of the hot surfaces on the router:
• The SFP interface might not turn off the laser when the interface is disabled.
• The Ethernet cables permanently connected to the router must be shielded CAT6A
type cables.
• The intrabuilding port(s) of the router is suitable for connection to intrabuilding or
unexposed wiring or cabling only. The intrabuilding port(s) of the router MUST NOT
bemetallically connected to interfaces that connect to the OSP or its wiring. These
interfaces are designed for use as intrabuilding interfaces only (Type 2 ports as
described in GR-1089-CORE, Issue 6) and require isolation from the exposed cabling.
The addition of primary protectors is not sufficient protection in order to connect these
interfaces metallically to OSPwiring.
Copyright © 2018, Juniper Networks, Inc.22
LN2600 Rugged Security Router
• The intrabuildingport(s)of theequipmentmustuse intrabuildingcablingorwiring that
is grounded at both ends.
• The battery return connection is to be treated as an isolated DC return (that is DC-I),
as defined in GR-1089-CORE.
• The equipment is suitable for installation as part of the Common Bonding Network
(CBN).
• The equipment is suitable for installation in telecommunication network facilities and
locations where the National Electrical Code (NEC) applies.
RelatedDocumentation
Safety Guidelines for the LN2600 Router on page 23•
Safety Guidelines for the LN2600 Router
The router is designed to protect against the risk of electrical shock and other hazards
during installation, operation, andmaintenance, andunder likely fault conditions, including
human error. It complies with grounding requirements of NFPA 70-93, article 250. As a
precautionary measure to avoid harm to yourself as you install andmaintain the router
module, follow the guidelines for working near and with electrical equipment, as well as
the safety procedures for working with Internet routers.
The following guidelines help ensure your safety and protect the hardware equipment
fromdamage.The list of guidelinesmight notaddressall potentially hazardous situations
in your working environment, so be alert and exercise good judgment at all times.
• Performonly theprocedures explicitly described in this documentation.Make sure that
only authorized service personnel perform other system services.
• Keep the area around the chassis clear and free from dust before, during, and after
installation.
• Keep tools away from areas where people could trip over themwhile walking.
• Do not wear loose clothing or jewelry, such as rings, bracelets, or chains, which could
become caught in the chassis.
• Wear safety glasses if you are working under any conditions that could be hazardous
to your eyes.
• Do not perform any actions that create a potential hazard to people or make the
equipment unsafe.
• Never attempt to lift an object that is too heavy for one person to handle.
• Never install or manipulate wiring during electrical storms.
• Never install electrical jacks in wet locations unless the jacks are specifically designed
for wet environments.
• Operate the hardware equipment only when the chassis is properly grounded.
• Do not open or remove chassis covers or sheet metal parts unless instructions are
provided in this documentation. Such an action could cause severe electrical shock.
23Copyright © 2018, Juniper Networks, Inc.
Chapter 5: Safety Information
• Do not push or force any object through any opening in the chassis frame. Such an
action could result in electrical shock or fire.
• Avoid spilling liquid onto the chassis or onto any hardware component. Such an action
could cause electrical shock or damage the hardware equipment.
• Avoid touching uninsulated electrical wires or terminals that have not been
disconnected from their power source. Such an action could cause electrical shock.
RelatedDocumentation
• SafetyWarnings for the LN2600 Router on page 22
• Definition of SafetyWarning Levels on page 21
Copyright © 2018, Juniper Networks, Inc.24
LN2600 Rugged Security Router
CHAPTER 6
Compliance
• Agency Approvals and Compliance Statements for the LN2600 Router on page 25
• Declaration of Conformity on page 27
Agency Approvals and Compliance Statements for the LN2600 Router
The LN2600 router complies with the following standards:
• Safety
• CAN/CSA-C22.2 No. 60950-1 (2007) Information Technology Equipment - Safety
• UL 60950-1 (2nd Ed.) Information Technology Equipment - Safety
• EN 60950-1 (2006 +A11:2009 +A1:2010 and A12:2011) Information Technology
Equipment - Safety
• IEC 60950-1 (2005 +A1:2009) Information Technology Equipment - Safety (All
country deviations): CB Scheme report
• EN 60825-1 (2007) Safety of Laser Products - Part 1: Equipment Classification
• EN 60825-2 (2004 +A2:2010) Hazard Level 1
• IEC 60529 Edition 2.1 Degrees of Protection provided by Enclosures (IP Code) IP64
requirement
• IEC 60664 Edition 2 Table A.2 (altitude <5000m)
• GB4943.1-2011 (tropical climate area)
• GSmark
• EMC (Class A)
• FCC 47CFR, Part 15 Class A - Rules for Radio Frequency Devices, USA
• ICES-003 Issue 5(2012) - Information technology equipment, Canada
• ETSI EN 300 386 V1.6.1 (2012) - Telecommunication Network Equipment, Europe
• EN 55022 (2010) (CISPR22: 2008) - Information technology equipment, Europe
• VCCI, V-3/2012.04 - Information Technology Equipment, Japan
• AS/NZSCISPR22:2009- Information technologyequipment,Australia/New-Zealand
25Copyright © 2018, Juniper Networks, Inc.
• KN 22 (2009-12) - Information technology equipment, South Korea
• BSMI CNS 13438 and NCC C6357 (2006) - Information Technology Equipment,
Taiwan
• TEC/EMI/TEL-001/01/FEB-09 - Information Technology Equipment, India
• EMI
• ETSI EN 300 386 V1.6.1 (2012) - Telecommunication Network Equipment, Europe
• EN 55024 (2010) (CISPR24: 2010) - Information technology equipment, Europe
• KN 24 (2011-9) - Information technology equipment, South Korea
• TEC/EMI/TEL-001/01/FEB-09 - Information Technology Equipment, India
• NEBS
• SR-3580 NEBS Level 3
• GR-63-Core: NEBS, Physical Protection
• GR-1089-Core: EMC and Electrical Safety for Network Telecommunications
Equipment
• GR-3108-Core, Network Equipment in the Outside Plant (OSP), class 3
• ATT-TP-76200 Network Equipment Power, Grounding, Environmental, and Physical
Design Requirements
• VerizonTPR.9305VerizonNEBSCompliance:NEBSComplianceClarificationDocument
• ETSI EN 300 132-2 (2011) - Environmental Engineering (EE); Power Supply Interface
at the Input to Telecommunications and Datacom (ICT) Equipment: Part 2; Operated
by –48 V Direct Current (DC)
• ATIS-0600015.03.2009 Energy Efficiency for Telecommunication Equipment:
Methodology for Measurement & Reporting for Router and Ethernet Switch Products
• ATIS-0600015.2009EnergyEfficiency forTelecommunicationEquipment:Methodology
for Measurement & Reporting – General Requirements
• VZ.TPR.9205 Verizon NEBS Compliance: Energy Efficiency Requirements for
Telecommunications Equipment. Verizon Technical Purchasing Requirements Issue
5, October 2011
• IEC 61850-3 ed 1, 2002-01-16 - Communication networks and systems in substations,
International
• TS 61000-6-5, ed1.0 (2001-07) - Immunity for power station and substation
environments, International
• IEEE 1613: 2009 + 1613a (2011) - Communications Networking Devices Installed in
Electric Power Substations, International
Copyright © 2018, Juniper Networks, Inc.26
LN2600 Rugged Security Router
NOTE: Class 2 performance requirements aremet only when the LN2600routersupportsopticalSFPs.WhencopperSFPsaresupported, theLN2600router meets the Class 1 performance requirements.
• EN 50121-4:2006; Part 4 - Railway applications. Europe
RelatedDocumentation
SafetyWarnings for the LN2600 Router on page 22•
• Safety Guidelines for the LN2600 Router on page 23
Declaration of Conformity
This topic shows the Declaration of Conformity for the router.
Figure 7: LN2600 Declaration of Conformity
27Copyright © 2018, Juniper Networks, Inc.
Chapter 6: Compliance
RelatedDocumentation
• SafetyWarnings for the LN2600 Router on page 22
Copyright © 2018, Juniper Networks, Inc.28
LN2600 Rugged Security Router
PART 4
Installation
• Unpacking the Router on page 31
• Installing the Router on page 35
• Connecting the Router to Power on page 45
• Installing Components on page 51
29Copyright © 2018, Juniper Networks, Inc.
Copyright © 2018, Juniper Networks, Inc.30
LN2600 Rugged Security Router
CHAPTER 7
Unpacking the Router
• Unpacking the LN2600 Router on page 31
• Inspecting the Hardware on page 31
• Parts Inventory (Packing List) for the LN2600 Router on page 32
Unpacking the LN2600 Router
The router is shipped in a cardboard carton, secured with packing material.
Before you begin unpacking the router, be sure you have a utility knife to open the box.
To unpack the LN2600 router:
1. Open the box from the top to access the router in its protective package.
2. Remove the router and its protective package from the box.
3. Remove the protective packaging from the router.
RelatedDocumentation
Inspecting the Hardware on page 31•
• Packing Instructions for Returning an LN2600 Router on page 61
Inspecting the Hardware
After you remove the equipment from the shipping container:
• Confirm the contents of the container.
• Inspect all external surfaces and external connectors for visible signs of damage.
• Inspect all accessories shipped with each unit.
• Document any damage noted during your inspection.
RelatedDocumentation
Unpacking the LN2600 Router on page 31•
31Copyright © 2018, Juniper Networks, Inc.
Parts Inventory (Packing List) for the LN2600 Router
The LN2600 routers are shipped in a cardboard carton, secured with foam packing
material. The carton also contains an accessory box.
The router shipment includes a packing list. Check the parts you receive in the router
shipping carton against the items on the packing list. The packing list specifies the part
number and description of each part in your order. The SFP optics, rack-mounting kit,
and the wall-mounting kits are sold separately. They do not comewith the LN2600
router.
If any part on the packing list is missing, contact your customer service representative.
For international-dial or direct-dial options in countries without toll-free numbers, see
https://www.juniper.net/support/requesting-support.html.
Table 9 on page 32 through Table 11 on page 33 list the parts and their quantities in the
packing list.
Table 9: Parts List for the LN2600 Router
ComponentComponent
End User License AgreementLN2600 router
LN2600 router quick start guideJuniper Networks ProductWarranty
Table 10: Parts List for the Rack-Mounting Kit
ComponentComponent
Rackmount bracketsRack-mounting unit
Cable sealing foamJuniper Networks ProductWarranty
Hose bagEnd User License Agreement
Cable tieCage nuts
Thumb screwsHeat sink screws
Grounding cable lugShoulder screws
Bracket screws
NOTE: If needed, youmust provide additional mounting screws that areappropriate for your rack tomount the chassis on a rack.
Copyright © 2018, Juniper Networks, Inc.32
LN2600 Rugged Security Router
Table 11: Parts List for theWall-Mounting Kit
ComponentComponent
Wall-mount bracketsWall-mounting unit
Wall-mount screwsJuniper Networks ProductWarranty
Cable sealing foamEnd User License Agreement
Hose bagCage nuts
Cable tieGrounding cable lug
ScrewsThumb screws
Wall mounting drill template
RelatedDocumentation
• Inspecting the Hardware on page 31
• LN2600 Rugged Security Router Description on page 3
33Copyright © 2018, Juniper Networks, Inc.
Chapter 7: Unpacking the Router
Copyright © 2018, Juniper Networks, Inc.34
LN2600 Rugged Security Router
CHAPTER 8
Installing the Router
• Installing the LN2600 Router Overview on page 35
• Mounting the LN2600 Router on the Rack on page 35
• Mounting the LN2600 Router on theWall on page 40
Installing the LN2600 Router Overview
The LN2600 router comes with an option of mounting the router on a rack or on a wall.
Based on your need, you can install the LN2600 router in one of the following ways:
• “Mounting the LN2600Router on the Rack” on page 35—You canmount the LN2600
router on a standard 19 in. rack with help of a rack-mounting kit. The rack-mounting
kit is sold separately. It does not come with the LN2600 router.
• “Mounting the LN2600Router on theWall” on page 40—You canmount the LN2600
router on a suitable wall with the help of a wall-mounting kit. The wall-mounting kit
is sold separately. It does not come with the LN2600 router.
RelatedDocumentation
Mounting the LN2600 Router on the Rack on page 35•
• Mounting the LN2600 Router on theWall on page 40
• Before You Install the LN2600 Router on page 13
Mounting the LN2600 Router on the Rack
You canmount the LN2600 router on four posts of a standard 19 in. rack. The
rack-mounting kit comes with heat sink unit that provides enhanced cooling to the
LN2600 router.
A 19 in. rack is defined in Cabinets, Racks, Panels, and Associated Equipment (document
numberEIA-310-D)publishedby theElectronics IndustryAssociation(http://www.eia.org).
Ensure that you have the following parts and tools available:
• Phillips (+) screwdriver with a minimum shaft length of 6 inches (150mm)
• T10 Torx and 7-mm nut driver
35Copyright © 2018, Juniper Networks, Inc.
• An electrostatic discharge (ESD) grounding strap
• Mounting brackets, mounting screws, heat sink unit, andmatching screws provided
with the rack-mounting kit
• Ground label and ground lug provided with the rack-mounting kit
Tomount the LN2600 router on the 19 in. rack:
1. Attachanelectrostaticdischarge (ESD)groundingstrap toyourbarewrist, andconnect
the strap to one of the ESD points on the chassis.
2. Keep the LN2600 router on a horizontal surface near the rack.
3. Attach the heat sink unit provided with the rack-mounting kit to the rear side of the
LN2600 router, and secure it with eight heat sink screws.
Figure 8: LN2600 Router with Heat Sink Unit
2—1— Heat sink unitHeat sink screws
4. Attach the rack-mount brackets to the sides of the LN2600 router using one shoulder
screw on each side.
Copyright © 2018, Juniper Networks, Inc.36
LN2600 Rugged Security Router
Figure 9: LN2600 Router with Brackets
3—1— Rack-mount bracketThumb screw
4—2— Shoulder screwScrew
5. Attach the two thumb screws to the sides of the LN2600 router and secure it with
two screws.
6. Onthe rear sideof theLN2600 router, place thegroundingcable lugover thegrounding
points, and secure the grounding cable lug to the grounding points, first with the
washers, then with the screws.
37Copyright © 2018, Juniper Networks, Inc.
Chapter 8: Installing the Router
Figure 10: LN2600 Router with Grounding Lug
7. On the front side of the two rack rails, insert four cage nuts in the holes specified for
mounting the router. Install the cage nuts from the front of the front rail.
The rack-mounting kit comeswith cage nuts to supportmounting the LN2600 router
into the racks with square hole mounting flanges.
NOTE: For effective cooling in the rack-mount configuration, ensure thatyou have aminimum of 2 U (3.5 in) space above the router.
Copyright © 2018, Juniper Networks, Inc.38
LN2600 Rugged Security Router
Figure 11: LN2600 Router in the Rack
8. Slide the LN2600 router from the front side of the rack rails until it touches the rear
side of the rack rails. Ensure that the router sits properly on the rack.
9. Secure the LN2600 router from the front side with the rack screws.
10. On the rear side of the two rack rails, insert four cage nuts in the holes specified for
mounting the router. Install the cage nuts from the front of the back rail.
NOTE: Makesure that the two front cagenuts and the twoback cagenutsare at the same level.
11. Slide rear support brackets onto rear left and right side flanges of the LN2600 router,
and secure it to the rear side of the rack mounting rails with bracket screws.
12. Secure the rear support brackets to the four rear cage nuts with screws.
The LN2600 router is now ready for use. Connect the power supply and cabling as
required.
39Copyright © 2018, Juniper Networks, Inc.
Chapter 8: Installing the Router
RelatedDocumentation
LN2600 Router Physical Specifications on page 14•
• LN2600 Router Power Requirements on page 17
• Powering on the LN2600 Router on page 45
• Installing the SFP Transceiver in the LN2600 Router on page 51
• Diagnostic Tests on page 75
Mounting the LN2600 Router on theWall
You canmount the LN2600 router on the wall with the help of a wall-mounting kit. The
wall-mounting kit comes with heat sink unit that provides enhanced cooling to the
LN2600 router.
NOTE: The wall on which you want to install the LN2600 router along withthe wall-mounting unit must have the following:
• The thickness of the wall must be aminimum of 1 meter to allow easyaccess to the connectors.
If you are installing the LN2600 router wall-mounting unit on a plywoodwall, the thickness of the plywoodwall must be aminimum of 3/4 inch.
• The concrete wall must be aminimum of 800 PSI (5.5 MPA) strength.
Ensure that you have the following parts and tools available:
• Phillips (+) screwdriver with a minimum shaft length of 6 inches (150mm)
• 3/8 inches ratchet driver set
• An electrostatic discharge (ESD) grounding strap
• Wall-mounting unit along with the mounting screws and chassis mounting screws
provided with the wall-mounting kit
• Ground label and ground lug provided with the wall-mounting kit
• Marker pen
• Drilling machine
Tomount the LN2600 router on the wall:
1. Attachanelectrostaticdischarge (ESD)groundingstrap toyourbarewrist, andconnect
the strap to one of the ESD points on the chassis.
2. Prepare the LN2600 router for wall-mounting by removing the two screws and the
respective nuts located on the top and bottom center of the LN2600 router, and keep
the two screws for using it later. Youmay discard the two nuts. They are not required
for wall-mounting the LN2600 router.
Copyright © 2018, Juniper Networks, Inc.40
LN2600 Rugged Security Router
Figure 12: LN2600 Router Screw Removal
2—1— Router nutsRouter screws
3. Place the wall-mounting drill hole template on the wall (concrete or plywoodwall as
required) and drill four holes on the exact pre-drill locationsmarked on the template.
Ensure that the drill hole template is leveled properly.
The wall-mounting drill hole template is a paper template that comes with the
wall-mounting unit. The template has exact mount hole locations marked.
NOTE: Ensure that you have aminimum of 355mm (14 in) space to theleft and that of 250mm(10 in) to the right of thewall-mounting drill holetemplate.
For installing the LN2600 router on a wall:
• If you are using Tapcon®concrete screws, drill the screw holes of 3/16 inch to a
depth of 2.25 inch.
• If you are using Hilty®anchors, drill the anchor holes of 1/4 inch to a depth of 1.5
inch.
For installing the LN2600 router on a plywood surface, drill the pilot screw holes of
1/8 inch.
4. Install the respective screws (or anchors as required) to the drill holes till you have
1/4 inch of the screw left.
41Copyright © 2018, Juniper Networks, Inc.
Chapter 8: Installing the Router
5. Place the wall-mount unit on top of the screws (or anchors) through the key holes
present on thewall-mount unit, and tighten the screws to secure thewall-mount unit
in place..
6. Place the LN2600 router on top of the wall-mount unit aligning the center mounting
posts with the rear screw holes present on the bottom of the LN2600 router.
7. Secure the LN2600 router using the two screws removed in step 2.
Figure 13: LN2600 Router on theWall-Mounting Unit
3—1— LN2600 routerWall-mount screws
2—Wall-mounting unit
8. Secure the LN2600 router with the wall-mounting unit by attaching twowall-mount
clamps each to the top and bottom of the wall-mounting unit. Secure the clamps
with screws.
Copyright © 2018, Juniper Networks, Inc.42
LN2600 Rugged Security Router
9. On the right side of the wall-mount unit, secure the LN2600 router with eight heat
sink screws.
10. Install the grounding cable lug over the grounding points on the right of the
wall-mounting unit, and secure themwith grounding screws and washers.
Figure 14: Grounding Points on the LN2600 Router
2—1— Grounding cable screwsGrounding cable lug
The LN2600 router is now ready for use. Connect the power supply and cabling as
required.
RelatedDocumentation
• LN2600 Router Physical Specifications on page 14
• LN2600 Router Power Requirements on page 17
• Powering on the LN2600 Router on page 45
• Installing the SFP Transceiver in the LN2600 Router on page 51
• Diagnostic Tests on page 75
43Copyright © 2018, Juniper Networks, Inc.
Chapter 8: Installing the Router
Copyright © 2018, Juniper Networks, Inc.44
LN2600 Rugged Security Router
CHAPTER 9
Connecting the Router to Power
• Powering on the LN2600 Router on page 45
Powering on the LN2600 Router
TheLN2600 router derives itspower fromasingle -48VDCpower supplywithdual power
inputs.
CAUTION: The LN2600 router hasmore than one power source. Ensureproper care while connecting the DC power supply to the router.
You connect DC power to the router by attaching power cables from the external DC
power sources to the terminal on the power supply ports. The power cables are not
provided with the router.
To connect the DC source power cables to the router for each power supply:
1. Power off the dedicated customer site circuit breakers. Ensure that the voltage across
the DC power source cable leads is 0 V and that there is no chance that the cable
leads might become active during installation.
2. Attachanelectrostaticdischarge (ESD)groundingstrap toyourbarewrist, andconnect
the strap to one of the ESD points on the chassis.
3. Verify that the DC power cables are correctly labeled before making connections to
thepower supply. In a typical powerdistribution schemewhere the return is connected
to chassis groundat thebattery plant, youcanuseamultimeter to verify the resistance
of the 48V and RTN cables to chassis ground:
• The cable with very large resistance (indicating an open circuit) to chassis ground
is –48V.
• The cable with very low resistance (indicating a closed circuit) to chassis ground is
RTN.
4. Loosen the screws from the power terminals using a 2.5 mm slotted screw driver.
45Copyright © 2018, Juniper Networks, Inc.
Figure 15: Dual DC Power Source
WARRANTY
VOID IFREMOVE
D
CAUTION: Youmust ensure that power connectionsmaintain the properpolarity. Thepower source cablesmight be labeled (+)and (–) to indicatetheir polarity. There is no standard color coding for DC power cables. Thecolor coding usedby the externalDCpower source at your site determinesthe color coding for the leads on the power cables that attach to theterminal studs on each power supply.
5. Insert the power cables as specified to the respective power terminals, and secure
the cables with the screws.
• Secure the positive (+) DC source power cable to the RTN (return) terminal.
• Secure the negative (–) DC source power cable to the –48V (input) terminal.
CAUTION: Ensure that each power cable seats flush against the surfaceof the terminal block as you are tightening the screws. Ensure that eachscrew is properly threaded into the terminal. Applying installation torqueto the screwwhen improperly threadedmay result in damage to theterminal.
6. Repeat Step 4 through Step 5 for the remaining power supply.
7. Arrange the other end of the power cables in a single bundle, and pass them through
the power cable entrance (see Figure 18 on page 54).
Copyright © 2018, Juniper Networks, Inc.46
LN2600 Rugged Security Router
8. Power on the dedicated customer site circuit breakers.
9. Monitor router startup on the console and the LED on the front panel of the LN2600
router to verify that the router is booting properly. For information on the LN2600
router status LED, see “LN2600 Router Status LED” on page 8.
Asastandardpartof thebootprocess, the router runsstartuppower-onself test (SPOST)
and then power-on self test (POST) diagnostics.
A successful startup looks similar to the following example:
CPU Memory (Data32: 00000000-0007ffff) test completed, 1 pass, 0 errorsCPU Memory (Data32: 0f000000-0fffffff) test completed, 1 pass, 0 errorsCPU Memory (Addr32: 00000000-0007ffff) test completed, 1 pass, 0 errorsCPU Memory (Addr32: 0f000000-0fffffff) test completed, 1 pass, 0 errors
Boot Flash: 16 MB in 131 Sectors (portwidth: 16bit chipwidth: 16bit)OCTEON CN56XX pass 2.1, Core clock: 600 MHz, DDR clock: 266 MHz
Initializing USBDevice 1: Product DOTG Root Hub
Initializing IDE
Initializing FPGAProgramming /cf/usr/share/pfe/firmware/563-029572.bit: 2067591 bytesProgrammed successfully (time: 883966125 ticks)PCIe: Waiting for port 0 linkPCIe: Port 0 link active, 1 lanes0:00:00.0 0x003b1304HWA FPGA Version 0x0011081200000055PCIe: Waiting for port 1 linkPCIe: Port 1 link active, 4 lanes1:00:00.0 0x0009184eIDP Revision Date-Time: 05/28/08-18:00:00
Juniper LN2600 revision 1.3, Serial# 1R263360016*
Juniper Part # 650-046793
Bootstrap: #1.6
Loader: #2.3 12.1X45-D10 2013-07-04 05:03:05 UTC
IPMC: 1.0.19
IPMC_RB: 1.0.19
SDRAM: 2048 MB
47Copyright © 2018, Juniper Networks, Inc.
Chapter 9: Connecting the Router to Power
Boot flash: 16 MB @ 0x1fc00000IDE flash: 3.7 GB (7946064 x 512)USB: not availablecurrent_dev: idecoremask: 0xfff (12 cores)reset: HardNVMRO: Write-enabledwatchdog: ArmedFPGA: Enabled
Firmware Image Status:Primary Bootstrap: UP TO DATESecondary Loader0: UP TO DATESecondary Loader1: UP TO DATEIPMC Firmware: UP TO DATEIPMC_RB Firmware: UP TO DATE
Hit any key to stop autoboot: 0
Checking firmware for updates...
IPMC test IPMC test completed, 1 pass, 0 errors, 0 warnings
******************************** POST********************************
CPU BIST test CPU BIST test completed, 1 pass, 0 errors, 0 warnings
CPU Core (0ffe) test CPU Core (0ffe) test completed, 1 pass, 0 errors, 0 warnings
CPU GPIO test
*** Warning during CPU GPIO test, pass 1,NVMRO not asserted, verify error at location 0x8001070000000880, expected 0x0002, actual 0x0000, Slot 0 (Signal ref. des. NVMRO[A4])
CPU GPIO test completed, 1 pass, 0 errors, 1 warning
CPU Memory (Post: 00080000-0effffff) test CPU Memory (Post: 00080000-0effffff) test completed, 1 pass, 0 errors, 0 warnings
CPU Memory (Post: 20000000-7fffffff) test CPU Memory (Post: 20000000-7fffffff) test completed, 1 pass, 0 errors, 0 warnings
CPU Memory (Post: c0000000-cfffffff) test CPU Memory (Post: c0000000-cfffffff) test completed, 1 pass, 0 errors, 0 warnings
Juniper ID EEPROM test Juniper ID EEPROM test completed, 1 pass, 0 errors, 0 warnings
SysFlash test SysFlash test completed, 1 pass, 0 errors, 0 warnings
Copyright © 2018, Juniper Networks, Inc.48
LN2600 Rugged Security Router
I2C Bus test I2C Bus test completed, 1 pass, 0 errors, 0 warnings
PCIe Interface test PCIe Interface test completed, 1 pass, 0 errors, 0 warnings
IDP Interface test IDP Interface test completed, 1 pass, 0 errors, 0 warnings
HWA Memory (Short MemWalk: 00000000-04000000) test HWA Memory (Short MemWalk: 00000000-04000000) test completed, 1 pass, 0 errors, 0 warnings
HWA Memory (Short MemAddr: 00000000-04000000) test HWA Memory (Short MemAddr: 00000000-04000000) test completed, 1 pass, 0 errors, 0 warnings
HWA Packet test HWA Packet test completed, 1 pass, 0 errors, 0 warnings
Sensor test Sensor test completed, 1 pass, 0 errors, 0 warnings
Temp near FPGA | 29 degrees C | OK Temp near NPU | 25 degrees C | OK Temp near SFP3 | 23 degrees C | OK Temp near SFP0 | 25 degrees C | OK FPGA +3.3V | 3294 millivolts | OK VDD +3.3V | 3294 millivolts | OK 0.9V OK | 0 | Asserted 1.8V OK | 0 | Asserted 1.2V OK | 0 | Asserted 1.1V OK | 0 | Asserted 1.0V OK | 0 | Asserted NPU Tj | disabled | NS
NPU Tj: / 34C
IPMC test IPMC test completed, 1 pass, 0 errors, 0 warnings
Booting...Booting /kernel ...
For normal operation, allow the autoboot to proceed. Do not press any keywhen you get
the Hit any key to stop autoboot: message.
Full POST diagnostics then run, and the system starts Junos OS normally. If detailed
diagnostics must be run, or if alternatemedia (for example, a USB storage device) must
be booted, press any key before or during the 1-second countdown. The following
bootstrap prompt is displayed:
BOOT>
If POST diagnostics or the bootstrap sequence fails, the bootstrap prompt is displayed
again, and the front panel LED lights turn red.
49Copyright © 2018, Juniper Networks, Inc.
Chapter 9: Connecting the Router to Power
RelatedDocumentation
• LN2600 Router Power Requirements on page 17
• LN2600 Router Status LED on page 8
• Diagnostic Tests on page 75
Copyright © 2018, Juniper Networks, Inc.50
LN2600 Rugged Security Router
CHAPTER 10
Installing Components
• Installing the SFP Transceiver in the LN2600 Router on page 51
• Weatherproofing the LN2600 Router on page 53
Installing the SFP Transceiver in the LN2600 Router
You can install up to eight SFP transceivers in the LN2600 router. The SFP transceivers
are hot-removable and hot-insertable. You can remove and replace themwithout
powering off the LN2600 router or disrupting the router functions.
WARNING: Donot lookdirectly into transceiversor into theendsof fiber-opticcables connected to a transceiver. Fiber-optic transceivers emit laser lightthat can damage your eyes.
CAUTION:
When handling fiber-optic transceivers and fiber-optic cable, observe thefollowing precautions:
• Do not leave a fiber-optic transceiver uncovered except when inserting orremoving cable. The safety cap keeps the port clean and preventsaccidental exposure to laser light.
• Do not bend fiber-optic cable beyond its minimum bend radius. An arcsmaller than a few inches in diameter can damage the cable and causeproblems that are difficult to diagnose.
• Do not let fiber-optic cable hang free from the connector. Do not allowfastened loopsofcable todangle,whichstresses thecableat the fasteningpoint.
51Copyright © 2018, Juniper Networks, Inc.
Figure 16: Small Form-Factor Pluggable (SFP)
g001
855
Connector
Locking pin
To install an SFP transceiver:
1. Attachanelectrostaticdischarge (ESD)groundingstrap toyourbarewrist, andconnect
the strap to one of the ESD points on the chassis.
2. Verify that a rubber safety cap covers the SFP transceiver, installing one if necessary.
3. Orient the SFP over the port in the router so that the connector endwill enter the slot
first and the SFP connector faces the appropriate direction.
Figure 17: Installing the SFP Transceiver
WARRANTY
VOID IFREMOVE
D
4. Slide the SFP into the slot.
Copyright © 2018, Juniper Networks, Inc.52
LN2600 Rugged Security Router
5. Remove the rubber safety cap from the transceiver and the end of the cable, and
insert the cable into the transceiver.
6. Verify that the SFP is installed by entering the CLI show chassis hardware detail
command.
The output will be displayed similar to this:
root@ln2600> show chassis hardware detail Hardware inventory:Item Version Part number Serial number DescriptionChassis LN2600Routing Engine REV 01 xxx-yyyyyy ABCDXXXX RE-LN2600 ad0 3879 MB 4GB NANDrive 00000000001R18C8B7fIFPC 0 FPC PIC 0 8x GE Base PIC Xcvr 0 REV 01 740-013111 8142777 SFP-T Xcvr 1 REV 01 740-031851 PLT17N5 SFP-SX Xcvr 2 REV 01 740-031851 AM1229SY78D SFP-SX Xcvr 3 REV 02 740-011613 PHE2JA7 SFP-SX Xcvr 4 REV 01 740-031851 AM1229SY6WR SFP-SX Xcvr 5 REV 01 740-031851 PM3082M SFP-SX Xcvr 6 REV 01 740-013111 8156347 SFP-T Xcvr 7 REV 01 740-013111 8154982 SFP-TPower Supply 0
RelatedDocumentation
Safety Guidelines for the LN2600 Router on page 23•
• SafetyWarnings for the LN2600 Router on page 22
Weatherproofing the LN2600 Router
The LN2600 router is built to withstand water, dust, and unwanted interferences. There
are two parts to securing and weatherproofing the LN2600 router cables—securing the
front interface cables and the power cables, and securing the external cables.
The cablemanagement system, along with the protective top and bottom cover panels,
protects the front interface cables and power cables connected to the LN2600 router.
The top cover panel has protective rubber gasket attached to it. This makes the cable
management systemwater and dust resistant when closed.
The external exposed cables coming out of the LN2600 router need to be protectedwith
the hose bag and cable ties. If left exposed to direct sun and rain, over time the cables
may slowly get damaged.
To arrange and secure the cables:
1. Pass the power cables through the power cable entrance.
2. Plug the interfacecablesand thepowercables in their respectiveportson theLN2600
router.
53Copyright © 2018, Juniper Networks, Inc.
Chapter 10: Installing Components
3. Place the cables in the groovespresent on the cablemanagement system, and secure
themwith the respective cable clips.
NOTE: When using copper cables for SFPs, do not lay the cables in thegrooves present on the cablemanagement system. Instead, just hold allthe cables together neatly at one place and secure it with a cable tie.
Figure 18 on page 54 shows the cablemanagement systemwithout the interface and
power cables plugged in to the router.
Figure 18: LN2600 Router Cable Management System
4—1— Interface cable entranceCable grooves
5—2— Power cable entranceCable clip
3—Cable tie
Each interface port on the front of the LN2600 router has a corresponding cable
groove on the cable management system. Insert and secure the SFPs to the cable
management tray starting from the port labeled 0, and gradually proceeding toward
the last port labeled 7.
Figure 19 on page 54 shows the final placement of the interface cables in the cable
management system. Colors used in Figure 19 on page 54 are just for clarity.
Figure 19: LN2600 Router Cable Management Systemwith Interface and Power Cables
4—1— DC power cablesUSB
5—2— Interface cable entranceGigabit Ethernet SFPs
6—3— Power cable entranceRJ-45 console cable
4. At the exit point, hold all the interface cables at one place with a cable tie.
Copyright © 2018, Juniper Networks, Inc.54
LN2600 Rugged Security Router
5. Pass the interface cable bundle through the interface cable entrance.
6. At the power cable entrance, tighten the power cord screw to seal the power cord.
7. Close the top cover panel, and secure it with three latches (see Figure 3 on page 5).
For enhanced security youmay secure the latcheswith locks. This precaution ensures
that the router is accessible only to authorized personal.
NOTE: When closing the top cover, make sure that the rubber gasketpresenton the topof thecablecoverunit isproperlyplacedon thegrooves.This rubber gasket prevents water and dust from entering the LN2600router unit.
Figure 20: LN2600 Router with Top Cover Panel Open
WARRANTY
VOID IFREMOVE
D
3—1— Status LEDTop cover panel
4—2— Bottom cable management unitProtective rubber gasket
8. Pass the interface cables that are coming out of the interface cable entrance through
the grooves present in the cable seal unit.
The cable seal is a small circular-shaped foam structure with grooves for the cables
topass through.Thecable seal sits tightly on the interfacecableentranceandprevents
water and dust particles from entering the cable management system.
NOTE: Ensurethateachgrooveonthefoamcablesealunitaccommodatesonly one cable through it.
55Copyright © 2018, Juniper Networks, Inc.
Chapter 10: Installing Components
Figure 21: LN2600 Router with Interface Cables
g007661
WARRANTY
VOID IFREMOVE
D
1 2 3
3—1— Interface cablesInterface cable entrance
2—Cable seal
9. Squeeze and slide the cable seal along with the interface cables into the interface
cable entrance until one fourth of the cable seal foam is left.
10.Wrap the interface cables that are coming out from the other end of the cable seal
with the hose bag, and secure it tightly with the Velcro that is attached to the hose
bag.
The hose bag is a rectangular synthetic material wrapper that prevents the cables
from damage due to extreme environmental conditions. The hose bag has Velcro
attached to it.
NOTE: Make sure that the sewnhemof the hose bag iswrappedon to theinterface cable exit.
Figure 22: LN2600 Router Interface CablesWrapped in Hose Bag
WARRANTY
VOID IFREMOVE
D
2—1— Interface cablesHose bag
11. Secure both the ends of the hose bag with the cable ties.
Copyright © 2018, Juniper Networks, Inc.56
LN2600 Rugged Security Router
Figure 23: LN2600 Router Interface Cables Protected with Hose Bag
2—1— Hose bagCable tie
12. Apply a pull of 16 lb to the cable ties to ensure that the cables sit tightly inside the
hose bag.
The LN2600 router cables are now secure from an extreme environment.
RelatedDocumentation
• Safety Guidelines for the LN2600 Router on page 23
• LN2600 Rugged Security Router Features on page 4
• Mounting the LN2600 Router on the Rack on page 35
• Mounting the LN2600 Router on theWall on page 40
57Copyright © 2018, Juniper Networks, Inc.
Chapter 10: Installing Components
Copyright © 2018, Juniper Networks, Inc.58
LN2600 Rugged Security Router
PART 5
Maintenance
• Packing and Returning Components on page 61
• Replacing Components on page 63
59Copyright © 2018, Juniper Networks, Inc.
Copyright © 2018, Juniper Networks, Inc.60
LN2600 Rugged Security Router
CHAPTER 11
Packing and Returning Components
• Information You Might Need to Supply to JTAC on page 61
• Packing Instructions for Returning an LN2600 Router on page 61
Information YouMight Need to Supply to JTAC
When requesting technical support from the JTAC by phone, be prepared to provide the
following information:
• Priority level
• Indication of what activity was being performed on the router when the problem
occurred
• Problem detail and configuration data, obtained by these commands:
• show version
• show chassis hardware
• show chassis environment
• show configuration
When a new request for technical support is submitted, the JTAC engineer:
• Opens a case and assigns a number
• Begins troubleshooting, diagnostics, and problem replication (if appropriate)
• Provides you with periodic updates on problem status and escalates the problem as
appropriate according to escalation management guidelines
• Closes the case when you agree that the problem has been resolved
RelatedDocumentation
Packing Instructions for Returning an LN2600 Router on page 61•
Packing Instructions for Returning an LN2600 Router
If possible, use theoriginal shippingcontainersandpackingmaterials inwhich theLN2600
hardware was originally shipped. If these materials are unavailable, use comparable
61Copyright © 2018, Juniper Networks, Inc.
shipping materials, or contact your Juniper Networks representative for information on
approved packaging material.
To pack the LN2600 hardware for shipment:
1. Issue the proper shutdown commands to halt your system.
2. Switch all power switches to the OFF position.
3. Remove the router from the rack-mounting or the wall-mounting unit.
4. Place the router in its protective container, and then put the router in a box, placing
packing foam around the router.
RelatedDocumentation
• Parts Inventory (Packing List) for the LN2600 Router on page 32
• Information You Might Need to Supply to JTAC on page 61
• Inspecting the Hardware on page 31
Copyright © 2018, Juniper Networks, Inc.62
LN2600 Rugged Security Router
CHAPTER 12
Replacing Components
• Removing the LN2600 Router on page 63
• Removing the SFP Transceiver from the LN2600 Router on page 64
Removing the LN2600 Router
The interface cables on the LN2600 router are hot-swappable; power can be left on
while you remove or replace a cable without damaging the router.
Ensure that you have the following parts and tools available:
• A 3/32 in Allen wrench with a torque of 5 lb-in (0.56 Nm).
• Phillips (+) screwdriver
• An electrostatic discharge (ESD) grounding strap
CAUTION: The LN2600 router hasmore than one power source. Ensureproper care while disconnecting the DC power supply to the router.
To remove the router from the 19 in. rack:
1. Attachanelectrostaticdischarge (ESD)groundingstrap toyourbarewrist, andconnect
the strap to one of the ESD points on the chassis.
2. Using the screwdriver, loosen the four cage nuts from the front and from the rear of
the rack that hold the LN2600 router.
Ensure that you hold the router from the bottom for support before loosening the
nuts.
3. Hold the LN2600 router from the bottom to support it, and pull it completely out of
the rack.
63Copyright © 2018, Juniper Networks, Inc.
To remove the router from the wall-mounting unit:
1. Attachanelectrostaticdischarge (ESD)groundingstrap toyourbarewrist, andconnect
the strap to one of the ESD points on the chassis.
2. Using the screwdriver, loosen the four clamps from the top and bottom of the
wall-mounting unit that holds the LN2600 router to the wall-mounting unit.
3. Using the screwdriver, remove the eight nuts from the side of the heat sink unit.
4. Using the screwdriver, remove the two screws from the top center of the LN2600
router.
5. Hold the LN2600 router from the bottom for support, and pull it completely out of
the wall-mounting unit.
RelatedDocumentation
Mounting the LN2600 Router on theWall on page 40•
• Mounting the LN2600 Router on the Rack on page 35
Removing the SFP Transceiver from the LN2600 Router
WARNING: Donot lookdirectly into transceiversor into theendsof fiber-opticcables connected to a transceiver. Fiber-optic transceivers emit laser lightthat can damage your eyes.
CAUTION:
When handling fiber-optic transceivers and fiber-optic cable, observe thefollowing precautions:
• Do not leave a fiber-optic transceiver uncovered except when inserting orremoving cable. The safety cap keeps the port clean and preventsaccidental exposure to laser light.
• Do not bend fiber-optic cable beyond its minimum bend radius. An arcsmaller than a few inches in diameter can damage the cable and causeproblems that are difficult to diagnose.
• Do not let fiber-optic cable hang free from the connector. Do not allowfastened loopsofcable todangle,whichstresses thecableat the fasteningpoint.
Copyright © 2018, Juniper Networks, Inc.64
LN2600 Rugged Security Router
Figure 24: Small Form-Factor Pluggable (SFP)
g001
855
Connector
Locking pin
To remove an SFP:
1. Place an electrostatic bag or antistatic mat on a flat, stable surface to receive the
SFP. Have ready a rubber safety cap for the SFP transceiver and the cable.
2. Attachanelectrostaticdischarge (ESD)groundingstrap toyourbarewrist, andconnect
the strap to one of the ESD points on the chassis.
3. Label the cable connected to the SFP so that you can later reconnect it to the correct
SFP.
4. Disconnect the cable from the SFP. Immediately cover the transceiver and the end
of the cable with a rubber safety cap.
5. Arrange the cable to prevent it from dislodging or developing stress points. Secure
the cable so that it is not supporting its own weight as it hangs to the floor. Place
excess cable out of theway in a neatly coiled loop. Placing fasteners on the loop helps
to maintain its shape.
6. Pull theejector handleaway fromtheSFP faceplate tounseat theSFP fromthe router.
Pull the SFP out of the router, and place it on the antistatic mat or in the electrostatic
bag.
CAUTION: After removing a transceiver from the chassis, wait at least 30seconds before reinserting it or inserting a transceiver into a different slot.Issue the CLI show chassis hardware detail command to verify the installed
transceivers.
RelatedDocumentation
• Safety Guidelines for the LN2600 Router on page 23
• SafetyWarnings for the LN2600 Router on page 22
65Copyright © 2018, Juniper Networks, Inc.
Chapter 12: Replacing Components
Copyright © 2018, Juniper Networks, Inc.66
LN2600 Rugged Security Router
PART 6
Troubleshooting
• Troubleshooting Router Boot-Up and Operation on page 69
• Contacting Customer Support on page 77
67Copyright © 2018, Juniper Networks, Inc.
Copyright © 2018, Juniper Networks, Inc.68
LN2600 Rugged Security Router
CHAPTER 13
Troubleshooting Router Boot-Up andOperation
• Accelerating the LN Series Router Boot-Up Process on page 69
• Diagnostic Tests on page 75
Accelerating the LN Series Router Boot-Up Process
Tominimize the time required for an LN Series router to become operational, you can
configure these BOOT features to accelerate the startup process:
• Disable or enable power-on self test (POST) using the no_run_post environmental
variable.
• Disable or enable file system cleanup using the fs_clean_boot environmental variable.
• Remove temporary files left over from the IDP security package installation.
BEST PRACTICE: We recommend that you only enable the no_run_post and
the fs_clean_bootenvironmental variables in networkswhen the time toboot
the platform is critical to system operations.
These options are not mutually exclusive and not linked. You can choose toset both options, set only one option, or set neither of the options. If neitheroption is set, the LN Series router’s default behavior remains unchanged;POST runs automatically, and the optional file system cleanup is notperformed.
This section contains the following topics:
• Accessing the LN Series Router BOOT> Prompt on page 70
• Disabling or Enabling POST on page 71
• Disabling or Enabling File System Cleanup on page 72
• Removing Temporary IDP Package Installation Files on page 75
69Copyright © 2018, Juniper Networks, Inc.
Accessing the LN Series Router BOOT> Prompt
You set the no_run_post and the fs_clean_boot environmental variables from the BOOT>
prompt.
To access the LN Series router BOOT> prompt:
1. Obtain console access to the LN Series router.
2. Start the boot cycle by rebooting or re-powering the router by entering the request
system reboot command at the console and answering yes to reboot the system
prompt. When the Boot Flash information displays on the console, press the space
bar.
lab@md-ln4-2> request system rebootReboot the system ? [yes,no] (no) yes
Shutdown NOW![pid 1938]
lab@md-ln4-2>*** FINAL System shutdown message from lab@md-ln4-2 ***
System going down IMMEDIATELY
JWaiting (max 60 seconds) for system process `vnlru' to stop...doneWaiting (max 60 seconds) for system process `vnlru_mem' to stop...doneWaiting (max 60 seconds) for system process `bufdaemon' to stop...doneWaiting (max 60 seconds) for system process `syncer' to stop...Syncing disks, vnodes remaining...0 0 0 0 done
syncing disks... All buffers synced.Uptime: 14h48m47sRebooting...cpu_reset: Stopping other CPUs
Boot Flash: 16 MB in 131 Sectors (portwidth: 16bit chipwidth: 16bit)OCTEON CN56XX pass 2.1, Core clock: 600 MHz, DDR clock: 266 MHz
Device 1: Product DWC OTG root hub
Initializing IDE
Initializing FPGAProgramming /cf/usr/share/pfe/firmware/563-029572.bit: 2067591 bytesProgrammed successfully (time: 883972430 ticks)PCIe: Waiting for port 0 linkPCIe: Port 0 link active, 1 lanes0:00:00.0 0x003b1304HWA FPGA Version 0x0011081200000055PCIe: Waiting for port 1 linkPCIe: Port 1 link active, 4 lanes1:00:00.0 0x0009184eIDP Revision Date-Time: 05/28/08-18:00:00
Copyright © 2018, Juniper Networks, Inc.70
LN2600 Rugged Security Router
Juniper LN1000-V revision 3.7, Serial# BF1111AG0006Juniper Part # 710-027379
Bootstrap: #1.6Loader: #2.5 12.1I20131213_1517_rwinter 2013-12-13 15:19:38 UTC [email protected]: 1.0.19IPMC_RB: 1.0.19
SDRAM: 1024 MBBoot flash: 16 MB @ 0x1fc00000IDE flash: 977.4 MB (2001888 x 512)USB: not availablecurrent_dev: idecoremask: 0xfff (12 cores)reset: SoftNVMRO: Write-enabledwatchdog: ArmedFPGA: EnabledFS Cleanup: DisabledPOST: Enabled
Firmware Image Status:Primary Bootstrap: UP TO DATESecondary Loader0: UP TO DATESecondary Loader1: UP TO DATEIPMC Firmware: UP TO DATEIPMC_RB Firmware: UP TO DATE
Hit any key to stop autoboot: 1
IPMC testIPMC test completed, 1 pass, 0 errors, 0 warnings
BOOT >
3. After pressing the space bar, the process continues performing some system tests,
and then the boot process stops at the BOOT> prompt.
4. For available commands, enter help or ? at the BOOT> prompt.
Disabling or Enabling POST
Disabling POST
To disable the POST feature:
BOOT> setenv no_run_post 1BOOT> saveenvBOOT> reset
NOTE: Only the first character of the environmental variable is evaluated. Ifthe variable is not set, or if the first character of the variable’s value is zero(0), then the default behavior for POST (runs automatically) and file systemcleanup (not performed) is followed.
71Copyright © 2018, Juniper Networks, Inc.
Chapter 13: Troubleshooting Router Boot-Up and Operation
When you disable POST, the standard set of POST diagnostic tests are skipped. The
following sample console output shows that the POST feature is disabled:
....NVMRO: Write-enabledwatchdog: ArmedFPGA: EnabledFS Cleanup: DisabledPOST: Disabled
Firmware Image Status:Primary Bootstrap: UP TO DATE.... IPMC test completed, 1 pass, 0 errors, 0 warnings
Skipping POST
Booting...
Enabling POST
To enable the POST feature and run the full set of POST diagnostic tests during the
boot-up process:
NOTE: The POST feature’s default setting is enabled.
BOOT> unsetenv no_run_post BOOT> saveenvBOOT> reset
or
BOOT> setenv no_run_post 0BOOT> saveenvBOOT> reset
When you enable POST, the full set of POST diagnostic tests run. The following sample
console output shows that the POST feature is enabled:
....NVMRO: Write-enabledwatchdog: ArmedFPGA: EnabledFS Cleanup: DisabledPOST: Enabled
Firmware Image Status:Primary Bootstrap: UP TO DATE....
Disabling or Enabling File SystemCleanup
Disabling File SystemCleanup
To disable the file system cleanup feature:
Copyright © 2018, Juniper Networks, Inc.72
LN2600 Rugged Security Router
NOTE: The file system cleanup’s default setting is disabled.
BOOT> unsetenv fs_clean_bootBOOT> saveenvBOOT> reset
or
BOOT> setenv fs_clean_boot 0BOOT> saveenvBOOT> reset
When you disable the file system cleanup feature, no files are deleted during the boot
process. The following sample consoleoutput shows that the file systemcleanup feature
is disabled:
....NVMRO: Write-enabledwatchdog: ArmedFPGA: EnabledFS Cleanup: DisabledPOST: Enabled
Firmware Image Status:Primary Bootstrap: UP TO DATE....
BESTPRACTICE: Werecommendthatyoudisable filesystemcleanupbeforeperforminga JunosOSupgrade. If youenable file systemcleanup, youcannotroll back Junos OS to a previous version, and in case of an upgrade failure,can result inanon-functioning router.Bysettingdisabling file systemcleanup,youmaintain the option of having a recoverable rollback image available, ifnecessary.
Enabling File SystemCleanup
When you enable the file system cleanup feature, certain unnecessary files are identified
and deleted early in the boot process. To enable the file system cleanup feature to select
and delete files:
BOOT> setenv fs_clean_boot 1BOOT> saveenvBOOT> reset
When you enable file system cleanup, temporary, log, and other unnecessary files are
identified and deleted. The following sample console output shows that the file system
cleanup feature is enabled:
....NVMRO: Write-enabledwatchdog: ArmedFPGA: EnabledFS Cleanup: Enabled
73Copyright © 2018, Juniper Networks, Inc.
Chapter 13: Troubleshooting Router Boot-Up and Operation
POST: Enabled
Firmware Image Status:Primary Bootstrap: UP TO DATE....WARNING: Autorecovery feature is not available asthis system does not support a recovery partitionStarting filesystem cleanup ... DoneLoading configuration .......
This additional sample console output shows the file system cleanup feature is enabled
with non-volatile memory read-only (NVMRO) switch enabled as well:
....NVMRO: Read-onlywatchdog: ArmedFPGA: EnabledFS Cleanup: EnabledPOST: Enabled
Firmware Image Status:Primary Bootstrap: UP TO DATE....Remounting directory /cf/var/home: 5MBytesPreserving directory /cf/etc: 5MBytesFilesystem cleanup skipped - NVMRO Read-onlyLoading configuration .......
No files are deleted when NVMRO is set to Read-only regardless of the fs_clean_boot
setting.
After the system completes its boot process, you can review the list of removed files by
reading the file_cleanup.log file:
root@ln1000% cat /var/tmp/file_cleanup.log/cf/var/log/appidd/cf/var/log/bin_messages/cf/var/log/chassisd/cf/var/log/cosd/cf/var/log/dcd..... /cf/var/tmp/policy_status/cf/var/tmp/rtsdb/if-rtsdb/cf/var/tmp/spu_kmd_init/cf/var/tmp/vpn_tunnel_orig.idroot@ln1000%
To determine the value of the fs_clean_boot environmental variable using the CLI:
root@ln1000% sysctl kern.fs_clean_bootkern.fs_clean_boot: 1root@ln1000%
Copyright © 2018, Juniper Networks, Inc.74
LN2600 Rugged Security Router
Removing Temporary IDP Package Installation Files
The fs_clean_boot option does not remove temporary files left over from the IDP security
package installation.To remove the temporary files, run theseparate IDPcleanup request
after installing or upgrading the IDP package:
user@ln1000>request security idp storage-cleanup downloaded-filesSuccessfully deleted downloaded secdb filesuser@ln1000>
RelatedDocumentation
Powering On the LN1000–VMobile Secure Router•
• Diagnostic Tests
• LN1000-V Router Power Requirements
Diagnostic Tests
Startup power-on self-test (SPOST) and power-on self-test (POST) diagnostic tests
runautomatically on theLN2600 router aspart of theboot-upprocessat everypower-on,
reset, or warm reboot. SPOST diagnostics consist of a limited suite of quick diagnostics
that ensure that systemcomponents required forBoot Loader anddiagnostics relocation
and execution from RAM are working without error. POST diagnostics consist of a suite
of quick diagnostics that ensure that components of the system are working without
error before trying to load and execute Junos OS. PASS/FAIL test results for the SPOST
and POST diagnostics are reported by means of the front panel LED and console port.
In the event that SPOST, POST, or the bootstrap sequence reports a failure and the front
panel LED lights red, extended diagnostic tests are available.
In the event of failure of any hardware component, run the diagnostic tests from the
BOOT prompt.
For information about running extended diagnostic tests and other hardware issues,
contact Juniper Networks.
RelatedDocumentation
• LN2600 Router Status LED on page 8
75Copyright © 2018, Juniper Networks, Inc.
Chapter 13: Troubleshooting Router Boot-Up and Operation
Copyright © 2018, Juniper Networks, Inc.76
LN2600 Rugged Security Router
CHAPTER 14
Contacting Customer Support
• Contacting Customer Support on page 77
Contacting Customer Support
You can contact Juniper Networks Technical Assistance Center (JTAC) 24 hours a day,
7 days a week in one of the following ways:
• On theWeb, using the Case Manager link at: https://www.juniper.net/support/
• By telephone:
From the US and Canada: 1-888-314-JTAC
From all other locations: 1-408-745-9500
If contacting JTAC by phone, enter your 11-digit case number followed by the # key if
this is an existing case, or press the * key to be routed to the next available support
engineer.
When requesting support from JTAC by telephone, be prepared to provide the following
information:
• Your existing case number, if you have one
• Details of the failure or problem
• Type of activity being performed on the platformwhen the problem occurred
• Configuration data using one or more of the show commands
RelatedDocumentation
• Information You Might Need to Supply to JTAC on page 61
77Copyright © 2018, Juniper Networks, Inc.
Copyright © 2018, Juniper Networks, Inc.78
LN2600 Rugged Security Router