LIVE WEBCAST AUCTION Bid online @ www.platinumassets.com • LIVE WEBCAST AUCTION LIVE WEBCAST AUCTION • LIVE WEBCAST AUCTION • LIVE WEBCAST AUCTION

As instructed by BDO Dunwoody Limited, Trustee we will sell the assets of:

LIVE WEBCASTAUCTION

LIVE WEBCASTAUCTION

225 Edgely Blvd., Unit 1, Concord, Ontario Canada

Auction: Tuesday, October 2 @ 11:00 AMPreview: Monday, October 1, 9:00 AM - 5:00 PM and morning of sale

PLATINUMAsset ServicesPLATINUMAsset Serviceswww.platinumassets.com

Phone: 416.366.2326 • Fax: 416.366.23255205 Tomken Road, Mississauga, Ontario L4W 3N8

Auctioneers • Appraisers • Financiers

“Personal ized Serv ice. . .F inancia l Strength”

PLATINUMAsset ServicesPLATINUMAsset Serviceswww.platinumassets.com

Phone: 416.366.2326 • Fax: 416.366.23255205 Tomken Road, Mississauga, Ontario L4W 3N8

Auctioneers • Appraisers • Financiers

“Personal ized Serv ice. . .F inancia l Strength”

PRECISION MACHINING & REPAIRS LTD.

WMW-UNION, BFT-130/6, HORIZONTAL BORING MILL

1999

HWACHEON, ECOMIL-85V, CNC VERTICAL MACHINING CENTRE

TERMS OF SALE All goods are sold “As Is, Where Is”. Detailed sale terms and conditionsare available at www.platinumassets.com. This brochure is meant merelyas a guide. Platinum makes no guarantee, express or implied, as to theaccuracy of the information in this brochure. Buyers should inspect itemsbeforehand to satisfy themselves. All assets are subject to prior sale.

PAYMENT Payments must be made by Cash, Certified funds, Wire Transfer orCompany Check accompanied with a bank letter guaranteeingirrevocable payment to Platinum Assets Services Inc. in the follow-ing format: "NAME OF BANK hereby guarantees irrevocable paymentof checks payable to Platinum Asset Services Inc. up to AMOUNT INWORDS & CURRENCY for purchases made by our client NAME OFCLIENT. This letter is valid for purchases made at the auction ofNAME OF AUCTION being held in CITY, STATE/PROVINCE on Date.Accompanied with a signed company cheque." A buyers’ premiumwill be added to all purchases – 12.5% onsite and 15% online. A$500 refundable security deposit is required upon registration. A25% deposit is required at time of purchase, balance due by 2 pm,Wednesday October 3. NO EXCEPTIONS.

ONLINE BIDDERSOnline bidders must establish credit with Platinum. A 25% deposit ofyour anticipated bid amount must be forwarded to Platinum on orbefore October 1, 2007. If you are unsuccessful your deposit will berefunded with-in 72 hours of the completed auction.

REMOVAL TERMSPlease visit www.platinumassets.com for further details. All smallitems by Thursday October 4 at 4pm and larger items by TuesdayOctober 9. Removal daily from 8am-4pm. No items maybe removedduring the auction. NO EXCEPTIONS.

DIRECTIONS AUCTION SITE : 225 Edgely Blvd., Unit 1, Concord, Ontario, CanadaFrom Toronto PearsonProceed east on Hwy. 409 to Hwy. 401 east. 401 east to Hwy. 400 north,exit at Hwy 7. West on Hwy. 7. Left on Edgely. Proceed to #225. Lookfor auction signs

Prin

ted

in C

anad

a

Member In Good Standing Of:

This brochure is meant merely as a guide. Platinum makesno guarantee, expressed, or implied as to the accuracy ofthe information in this brochure. Buyers should inspect

the goods beforehand to satisfy themselves.

PLATINUMAsset ServicesPLATINUMAsset Serviceswww.platinumassets.com

Phone: 416.366.2326 • Fax: 416.366.23255205 Tomken Road, Mississauga, Ontario L4W 3N8

Auctioneers • Appraisers • Financiers

“Personal ized Serv ice. . .F inancia l Strength”

KIHEUNG, COMBI-V10Heavy Duty CNC Vertical Machining Centre

HEIDENHAIN ITNC530 CNC

System Control

BRANDNEW!BRANDNEW!

BRANDNEW!BRANDNEW!

TRAVELS; X-126", Y-42", Z-34, 142" X 44" WORK TABLE, 6000 RPM SPINDLE, 40 ATC

Miscellaneous Equipment (con’t)SHOP PRESS, 60 ton.GRANITE SURFACE PLATE, 9’ x 3’.CAMBELL HAUSFELD, C1Q710612, 7.5 hp, tankmounted piston type air compressor, s/nLJ/22/97-09876.BRUNER 5hp air compressor.

Quality Control and Tooling125+ lots of quality inspection equipmentincluding micrometer, verniers, collets, cuttingtools, etc..

Office EquipmentDesks, chairs, boardroom table, lateral and verticalfiling cabinets, MERIDIAN phone system, etc..

Vehicles1999 AUDI A4 2.8 Quattro. Single owner vehicle,Bose sound system, 210,000KM. Water pump andtiming belt just replaced. Like New...

VIEW OF INSPECTION EQUIPMENT

AUDI A4 2,8 QUATTRO

1999

PARTIAL LISTINGSee website for full listing

4 Wheel Drive

Machine Availble For Sale by Private Treaty

Bid on-line at

Bid on-line at

LIVE WEBCAST AUCTION Bid online @ www.platinumassets.com • LIVE WEBCAST AUCTION Bid online @ www.platinumassets.com • LIVE WEBCAST AUCTION Bid online @ www.platinumassets.com • LIVE WEBCAST AUCTION Bid online @ www.platinumassets.com • LIVE WEBCAST AUCTION Bid online @ www.platinumassets.com

LIVE WEBCAST AUCTION Bid online @ www.platinumassets.com • LIVE WEBCAST AUCTION Bid online @ www.platinumassets.com • LIVE WEBCAST AUCTION Bid online @ www.platinumassets.com • LIVE WEBCAST AUCTION Bid online @ www.platinumassets.com • LIVE WEBCAST AUCTION Bid online @ www.platinumassets.com

MIGHTY-COMET, VMC-500, CNC VERTICAL MACHINING CENTRE

HAAS, HL4, CNC LATHE

TOS, SN71B, GAP BED ENGINE LATHE

WHACHEON, WL580 X 2000, GAP BED ENGINE LATHE

LEBLOND-MAKINO, SNC-86 CNC HIGH SPEED VERTICAL MACHINING CENTRE

POTISJE, PA45, GAP BED ENGINE LATHE

1996

Boring MillsWMW-UNION, BFT-130/6, horizontal boring mill,55” x 63” work table, 130mm spindle diameter,ISO#50 spindle taper, HEIDENHAIN, PT850 3 axisdigital read out, outboard support and verticalmilling spindle, s/n: 11173.

CNC Vertical Machining Centres1999 HWACHEON, ECOMIL-85V, CNC verticalmachining centre, 33.5” x 84” work table, travels;X-78”, Y-30”, Z-34”, 30 HP spindle motor, 5000RPM, CAT#50 taper, 24 position automatic toolchanger, FANUC 18MC CNC control, oil chiller, s/n:M25834783DA.

1997 HAAS, VF4, CNC vertical machining centre,18” x 52” work table, travels; X-50”, Y-20”, Z-25”,20 HP spindle motor, 7,500 RPM, CAT # 40 taper,20 position automatic tool changer, programmablecoolant nozzle, HAAS CNC control, s/n:12669,10885.1995 MIGHTY-COMET, VMC-500, CNC verticalmachining centre, 14” x 34” work table, travels; X-20”, Y-16”, Z-20”, 10 HP spindle motor, 6,000RPM, BT#40 spindle taper, 16 position automatictool changer, coolant system, MITSUBISHI, MEL-DAS CNC control.1994 LeBLOND-MAKINO, SNC-86 CNC high speedvertical machining centre, automatic pallet chang-er, (2) 39” x 24” work tables, travels; X-31.5”, Y-23.6, Z-16”, BT#40 spindle taper, 15000 RPM,

FANUC-MAKINO, system 16iM CNC control, graphitepackage and dust collection system.

CNC Lathes 1997 HAAS, HL4, CNC lathe, A2-6 spindle nose,10” Kitagawa 3-jaw hydraulic chuck, 20 HP spindlemotor, 3,400 RPM, 12 position turret, tool pre-setter, tail stock, coolant system, HAAS CNC con-trol, s/n:60895.

Lathes1978 POTISJE, PA45, gap bed engine lathe, 35”swing x 158” centres 5.5” bore, s/n: 370.SIRCO, PA-24, gap bed engine lathe, 24” swing x78” centres, s/n: 3038.TOS, SN71B, gap bed engine lathe, 28” swing x157” centres, 3” bore, D1-8 camlock mounting, 90

Graphite Machine

35”x158”

28”x157”

AUCTION APPRAISAL AND FINANCING SERVICESAre you looking to sell a single machine or an entire plant? Do you need an appraisal for banking, insurance or

financing purposes? Do you need working capital? We can help! Call us today in complete confidence.

DARBERT, 1254, VERTICAL TURRET MILL

TOS-KURIM, FNK-25, VERTICAL TURRET MILL

FIRST, VERTICAL TURRET MILLFIRST, VERTICAL TURRET MILLBAXTER VERTICUT,

115B, VERTICAL BANDSAW

FERRO, 3MV-R, VERTICAL TURRET MILL KONDIA, POWERMILL FV-1,

VERTICAL TURRET MILL

PROTH, PSGS-2550AH, HYDRAULIC SURFACE GRINDER

CHEVALIER, FSG-618, SURFACE GRINDER

ER MAIER, KM1012, VERTICAL BANDSAW

DARBERT-MICROCUT, PFG-618B, SURFACE GRINDER

1999

to 1000 RPM, chuck, tool post, s/n:071400810666.1996 WHACHEON, WL580 x 2000, gap bed enginelathe, 24”swing x 78” centres, D1-8 camlockmounting, 28 to 1350 RPM, 15 HP spidle motor, 3”bore, steady rest, 3-jaw chuck, tool post, coolantsystem, s/n: 250141.

DrillsFRED K TOWN & SONS LTD., 4014, 4’ radial armdrill, s/n: 9119.

Surface Grinders1999 DARBERT-MICROCUT, PFG-618B, 6”x 18”surface grinder, s/n: 9871016.1987 PROTH, PSGS-2550AH, 10” x 20” hydraulicsurface grinder, s/n: 703275.1993 FREEPORT, SGS-618M, 6” x 18” surfacegrinder, s/n: 307167.(2) CHEVALIER, FSG-618, 6” x 18” surfacegrinders, s/n: 02B-4638, 02C-5119ELLIOT, 921 MKII, surface grinder, s/n 1099873466

BLANCHARD, 18-36, 36" ROTARY SURFACE GRINDER,3000 LBS. TABLE, 35HP MOTOR, S/N 3841

MillsOKK, MH5V, vertical mill, travels; x-60", Y-22", Z-20", 22" x 96" work table.1996 DARBERT, 1254, vertical turret mill, 12” x54” work table, travels; X-36”, Y-14”, Z-6”, 5HPspindle motor, ISO#40 spindle taper, 70 to 3600RPM, x-axis powerfeed, coolant system, powerdraw bar, HEIDENHAIN, ND510, s/n: 9363.

1993 TOS-KURIM, FNK-25, vertical turret mill,11.5” x 49” work table, x and y axes powerfeed ,3 HP spindle motor, ISO#40 spindle taper, 56 to4500 RPM, HEIDENHAIN, ND510, digital read outsystem s/n: 18309.1999 FERRO, 3MV-R, vertical turret mill, 10” x50” work table, 3 HP spindle motor, R8 spindletaper, 70 to 4200 RPM, s/n: 990928.KONDIA, Powermill FV-1, vertical turret mill, 9” x48” work table, R8 spindle taper, 3 HP motor, 60to 4000 RPM, ACU-RITE digital read out, s/n:Q779.

FIRST, vertical turret mill, 9” x 42” work table, R8spindle taper, 3 HP motor, 60 to 4500 RPM, ACU-RITE digital read out, s/n: 80212247.FIRST, vertical turret mill, 10” x 50” work table,R8 spindle taper, 3 HP motor, 60 to 4500 RPM,Heidenhain, ND510 digital read out, s/n:83070503.

Factory EquipmentYALE, GLC080LCNSB3093, 8,000 lbs. 3 stage LPGforklift w/ sideshift, 155” lift, s/m N513119.

YALE, FRC120HON36SU110, 12,000 lbs. 2 stagebattery powered forklift, 152” lift, s/n 580137.

Miscellaneous EquipmentBAXTER VERTICUT, 115B, vertical bandsaw, s/n4118.ER MAIER, KM1012, vertical bandsaw, s/n 84797.JIB CRANE, floor standing, w/ 1 ton JET hoist.ESAB, migmaster, 250 amp mig welder.HYDRAULIC PRESS, 4 post, 85 ton (approx) 34"stroke

2 Available1997

1997

1994

HAAS, VF4, CNC VERTICAL MACHINING CENTRE

HYDRAULIC PRESS, 4 POST PRESS

12,000 LBSYALE 8000 LBS. LPG FORKLIFT

8,000 LBS

If you are unable to attend our sale, we would be pleased to act as your proxy. Please visit our website for

a proxy bid form or call our office at 416.366.2326

PROXY BIDDING

PARTIAL LISTINGSee website for full listing

YALE 12000 LBS. BATTERY POWERED FORKLIFT

Bid on-line at

1996

24”x80”

LIVE WEBCAST AUCTION Bid online @ www.platinumassets.com • LIVE WEBCAST AUCTION Bid online @ www.platinumassets.com • LIVE WEBCAST AUCTION Bid online @ www.platinumassets.com • LIVE WEBCAST AUCTION Bid online @ www.platinumassets.com • LIVE WEBCAST AUCTION Bid online @ www.platinumassets.com

LIVE WEBCAST AUCTION Bid online @ www.platinumassets.com • LIVE WEBCAST AUCTION Bid online @ www.platinumassets.com • LIVE WEBCAST AUCTION Bid online @ www.platinumassets.com • LIVE WEBCAST AUCTION Bid online @ www.platinumassets.com • LIVE WEBCAST AUCTION Bid online @ www.platinumassets.com

MIGHTY-COMET, VMC-500, CNC VERTICAL MACHINING CENTRE

HAAS, HL4, CNC LATHE

TOS, SN71B, GAP BED ENGINE LATHE

WHACHEON, WL580 X 2000, GAP BED ENGINE LATHE

LEBLOND-MAKINO, SNC-86 CNC HIGH SPEED VERTICAL MACHINING CENTRE

POTISJE, PA45, GAP BED ENGINE LATHE

1996

Boring MillsWMW-UNION, BFT-130/6, horizontal boring mill,55” x 63” work table, 130mm spindle diameter,ISO#50 spindle taper, HEIDENHAIN, PT850 3 axisdigital read out, outboard support and verticalmilling spindle, s/n: 11173.

CNC Vertical Machining Centres1999 HWACHEON, ECOMIL-85V, CNC verticalmachining centre, 33.5” x 84” work table, travels;X-78”, Y-30”, Z-34”, 30 HP spindle motor, 5000RPM, CAT#50 taper, 24 position automatic toolchanger, FANUC 18MC CNC control, oil chiller, s/n:M25834783DA.

1997 HAAS, VF4, CNC vertical machining centre,18” x 52” work table, travels; X-50”, Y-20”, Z-25”,20 HP spindle motor, 7,500 RPM, CAT # 40 taper,20 position automatic tool changer, programmablecoolant nozzle, HAAS CNC control, s/n:12669,10885.1995 MIGHTY-COMET, VMC-500, CNC verticalmachining centre, 14” x 34” work table, travels; X-20”, Y-16”, Z-20”, 10 HP spindle motor, 6,000RPM, BT#40 spindle taper, 16 position automatictool changer, coolant system, MITSUBISHI, MEL-DAS CNC control.1994 LeBLOND-MAKINO, SNC-86 CNC high speedvertical machining centre, automatic pallet chang-er, (2) 39” x 24” work tables, travels; X-31.5”, Y-23.6, Z-16”, BT#40 spindle taper, 15000 RPM,

FANUC-MAKINO, system 16iM CNC control, graphitepackage and dust collection system.

CNC Lathes 1997 HAAS, HL4, CNC lathe, A2-6 spindle nose,10” Kitagawa 3-jaw hydraulic chuck, 20 HP spindlemotor, 3,400 RPM, 12 position turret, tool pre-setter, tail stock, coolant system, HAAS CNC con-trol, s/n:60895.

Lathes1978 POTISJE, PA45, gap bed engine lathe, 35”swing x 158” centres 5.5” bore, s/n: 370.SIRCO, PA-24, gap bed engine lathe, 24” swing x78” centres, s/n: 3038.TOS, SN71B, gap bed engine lathe, 28” swing x157” centres, 3” bore, D1-8 camlock mounting, 90

Graphite Machine

35”x158”

28”x157”

AUCTION APPRAISAL AND FINANCING SERVICESAre you looking to sell a single machine or an entire plant? Do you need an appraisal for banking, insurance or

financing purposes? Do you need working capital? We can help! Call us today in complete confidence.

DARBERT, 1254, VERTICAL TURRET MILL

TOS-KURIM, FNK-25, VERTICAL TURRET MILL

FIRST, VERTICAL TURRET MILLFIRST, VERTICAL TURRET MILLBAXTER VERTICUT,

115B, VERTICAL BANDSAW

FERRO, 3MV-R, VERTICAL TURRET MILL KONDIA, POWERMILL FV-1,

VERTICAL TURRET MILL

PROTH, PSGS-2550AH, HYDRAULIC SURFACE GRINDER

CHEVALIER, FSG-618, SURFACE GRINDER

ER MAIER, KM1012, VERTICAL BANDSAW

DARBERT-MICROCUT, PFG-618B, SURFACE GRINDER

1999

to 1000 RPM, chuck, tool post, s/n:071400810666.1996 WHACHEON, WL580 x 2000, gap bed enginelathe, 24”swing x 78” centres, D1-8 camlockmounting, 28 to 1350 RPM, 15 HP spidle motor, 3”bore, steady rest, 3-jaw chuck, tool post, coolantsystem, s/n: 250141.

DrillsFRED K TOWN & SONS LTD., 4014, 4’ radial armdrill, s/n: 9119.

Surface Grinders1999 DARBERT-MICROCUT, PFG-618B, 6”x 18”surface grinder, s/n: 9871016.1987 PROTH, PSGS-2550AH, 10” x 20” hydraulicsurface grinder, s/n: 703275.1993 FREEPORT, SGS-618M, 6” x 18” surfacegrinder, s/n: 307167.(2) CHEVALIER, FSG-618, 6” x 18” surfacegrinders, s/n: 02B-4638, 02C-5119ELLIOT, 921 MKII, surface grinder, s/n 1099873466

BLANCHARD, 18-36, 36" ROTARY SURFACE GRINDER,3000 LBS. TABLE, 35HP MOTOR, S/N 3841

MillsOKK, MH5V, vertical mill, travels; x-60", Y-22", Z-20", 22" x 96" work table.1996 DARBERT, 1254, vertical turret mill, 12” x54” work table, travels; X-36”, Y-14”, Z-6”, 5HPspindle motor, ISO#40 spindle taper, 70 to 3600RPM, x-axis powerfeed, coolant system, powerdraw bar, HEIDENHAIN, ND510, s/n: 9363.

1993 TOS-KURIM, FNK-25, vertical turret mill,11.5” x 49” work table, x and y axes powerfeed ,3 HP spindle motor, ISO#40 spindle taper, 56 to4500 RPM, HEIDENHAIN, ND510, digital read outsystem s/n: 18309.1999 FERRO, 3MV-R, vertical turret mill, 10” x50” work table, 3 HP spindle motor, R8 spindletaper, 70 to 4200 RPM, s/n: 990928.KONDIA, Powermill FV-1, vertical turret mill, 9” x48” work table, R8 spindle taper, 3 HP motor, 60to 4000 RPM, ACU-RITE digital read out, s/n:Q779.

FIRST, vertical turret mill, 9” x 42” work table, R8spindle taper, 3 HP motor, 60 to 4500 RPM, ACU-RITE digital read out, s/n: 80212247.FIRST, vertical turret mill, 10” x 50” work table,R8 spindle taper, 3 HP motor, 60 to 4500 RPM,Heidenhain, ND510 digital read out, s/n:83070503.

Factory EquipmentYALE, GLC080LCNSB3093, 8,000 lbs. 3 stage LPGforklift w/ sideshift, 155” lift, s/m N513119.

YALE, FRC120HON36SU110, 12,000 lbs. 2 stagebattery powered forklift, 152” lift, s/n 580137.

Miscellaneous EquipmentBAXTER VERTICUT, 115B, vertical bandsaw, s/n4118.ER MAIER, KM1012, vertical bandsaw, s/n 84797.JIB CRANE, floor standing, w/ 1 ton JET hoist.ESAB, migmaster, 250 amp mig welder.HYDRAULIC PRESS, 4 post, 85 ton (approx) 34"stroke

2 Available1997

1997

1994

HAAS, VF4, CNC VERTICAL MACHINING CENTRE

HYDRAULIC PRESS, 4 POST PRESS

12,000 LBSYALE 8000 LBS. LPG FORKLIFT

8,000 LBS

If you are unable to attend our sale, we would be pleased to act as your proxy. Please visit our website for

a proxy bid form or call our office at 416.366.2326

PROXY BIDDING

PARTIAL LISTINGSee website for full listing

YALE 12000 LBS. BATTERY POWERED FORKLIFT

Bid on-line at

1996

24”x80”

LIVE WEBCAST AUCTION Bid online @ www.platinumassets.com • LIVE WEBCAST AUCTION Bid online @ www.platinumassets.com • LIVE WEBCAST AUCTION Bid online @ www.platinumassets.com • LIVE WEBCAST AUCTION Bid online @ www.platinumassets.com • LIVE WEBCAST AUCTION Bid online @ www.platinumassets.com

LIVE WEBCAST AUCTION Bid online @ www.platinumassets.com • LIVE WEBCAST AUCTION Bid online @ www.platinumassets.com • LIVE WEBCAST AUCTION Bid online @ www.platinumassets.com • LIVE WEBCAST AUCTION Bid online @ www.platinumassets.com • LIVE WEBCAST AUCTION Bid online @ www.platinumassets.com

MIGHTY-COMET, VMC-500, CNC VERTICAL MACHINING CENTRE

HAAS, HL4, CNC LATHE

TOS, SN71B, GAP BED ENGINE LATHE

WHACHEON, WL580 X 2000, GAP BED ENGINE LATHE

LEBLOND-MAKINO, SNC-86 CNC HIGH SPEED VERTICAL MACHINING CENTRE

POTISJE, PA45, GAP BED ENGINE LATHE

1996

Boring MillsWMW-UNION, BFT-130/6, horizontal boring mill,55” x 63” work table, 130mm spindle diameter,ISO#50 spindle taper, HEIDENHAIN, PT850 3 axisdigital read out, outboard support and verticalmilling spindle, s/n: 11173.

CNC Vertical Machining Centres1999 HWACHEON, ECOMIL-85V, CNC verticalmachining centre, 33.5” x 84” work table, travels;X-78”, Y-30”, Z-34”, 30 HP spindle motor, 5000RPM, CAT#50 taper, 24 position automatic toolchanger, FANUC 18MC CNC control, oil chiller, s/n:M25834783DA.

1997 HAAS, VF4, CNC vertical machining centre,18” x 52” work table, travels; X-50”, Y-20”, Z-25”,20 HP spindle motor, 7,500 RPM, CAT # 40 taper,20 position automatic tool changer, programmablecoolant nozzle, HAAS CNC control, s/n:12669,10885.1995 MIGHTY-COMET, VMC-500, CNC verticalmachining centre, 14” x 34” work table, travels; X-20”, Y-16”, Z-20”, 10 HP spindle motor, 6,000RPM, BT#40 spindle taper, 16 position automatictool changer, coolant system, MITSUBISHI, MEL-DAS CNC control.1994 LeBLOND-MAKINO, SNC-86 CNC high speedvertical machining centre, automatic pallet chang-er, (2) 39” x 24” work tables, travels; X-31.5”, Y-23.6, Z-16”, BT#40 spindle taper, 15000 RPM,

FANUC-MAKINO, system 16iM CNC control, graphitepackage and dust collection system.

CNC Lathes 1997 HAAS, HL4, CNC lathe, A2-6 spindle nose,10” Kitagawa 3-jaw hydraulic chuck, 20 HP spindlemotor, 3,400 RPM, 12 position turret, tool pre-setter, tail stock, coolant system, HAAS CNC con-trol, s/n:60895.

Lathes1978 POTISJE, PA45, gap bed engine lathe, 35”swing x 158” centres 5.5” bore, s/n: 370.SIRCO, PA-24, gap bed engine lathe, 24” swing x78” centres, s/n: 3038.TOS, SN71B, gap bed engine lathe, 28” swing x157” centres, 3” bore, D1-8 camlock mounting, 90

Graphite Machine

35”x158”

28”x157”

AUCTION APPRAISAL AND FINANCING SERVICESAre you looking to sell a single machine or an entire plant? Do you need an appraisal for banking, insurance or

financing purposes? Do you need working capital? We can help! Call us today in complete confidence.

DARBERT, 1254, VERTICAL TURRET MILL

TOS-KURIM, FNK-25, VERTICAL TURRET MILL

FIRST, VERTICAL TURRET MILLFIRST, VERTICAL TURRET MILLBAXTER VERTICUT,

115B, VERTICAL BANDSAW

FERRO, 3MV-R, VERTICAL TURRET MILL KONDIA, POWERMILL FV-1,

VERTICAL TURRET MILL

PROTH, PSGS-2550AH, HYDRAULIC SURFACE GRINDER

CHEVALIER, FSG-618, SURFACE GRINDER

ER MAIER, KM1012, VERTICAL BANDSAW

DARBERT-MICROCUT, PFG-618B, SURFACE GRINDER

1999

to 1000 RPM, chuck, tool post, s/n:071400810666.1996 WHACHEON, WL580 x 2000, gap bed enginelathe, 24”swing x 78” centres, D1-8 camlockmounting, 28 to 1350 RPM, 15 HP spidle motor, 3”bore, steady rest, 3-jaw chuck, tool post, coolantsystem, s/n: 250141.

DrillsFRED K TOWN & SONS LTD., 4014, 4’ radial armdrill, s/n: 9119.

Surface Grinders1999 DARBERT-MICROCUT, PFG-618B, 6”x 18”surface grinder, s/n: 9871016.1987 PROTH, PSGS-2550AH, 10” x 20” hydraulicsurface grinder, s/n: 703275.1993 FREEPORT, SGS-618M, 6” x 18” surfacegrinder, s/n: 307167.(2) CHEVALIER, FSG-618, 6” x 18” surfacegrinders, s/n: 02B-4638, 02C-5119ELLIOT, 921 MKII, surface grinder, s/n 1099873466

BLANCHARD, 18-36, 36" ROTARY SURFACE GRINDER,3000 LBS. TABLE, 35HP MOTOR, S/N 3841

MillsOKK, MH5V, vertical mill, travels; x-60", Y-22", Z-20", 22" x 96" work table.1996 DARBERT, 1254, vertical turret mill, 12” x54” work table, travels; X-36”, Y-14”, Z-6”, 5HPspindle motor, ISO#40 spindle taper, 70 to 3600RPM, x-axis powerfeed, coolant system, powerdraw bar, HEIDENHAIN, ND510, s/n: 9363.

1993 TOS-KURIM, FNK-25, vertical turret mill,11.5” x 49” work table, x and y axes powerfeed ,3 HP spindle motor, ISO#40 spindle taper, 56 to4500 RPM, HEIDENHAIN, ND510, digital read outsystem s/n: 18309.1999 FERRO, 3MV-R, vertical turret mill, 10” x50” work table, 3 HP spindle motor, R8 spindletaper, 70 to 4200 RPM, s/n: 990928.KONDIA, Powermill FV-1, vertical turret mill, 9” x48” work table, R8 spindle taper, 3 HP motor, 60to 4000 RPM, ACU-RITE digital read out, s/n:Q779.

FIRST, vertical turret mill, 9” x 42” work table, R8spindle taper, 3 HP motor, 60 to 4500 RPM, ACU-RITE digital read out, s/n: 80212247.FIRST, vertical turret mill, 10” x 50” work table,R8 spindle taper, 3 HP motor, 60 to 4500 RPM,Heidenhain, ND510 digital read out, s/n:83070503.

Factory EquipmentYALE, GLC080LCNSB3093, 8,000 lbs. 3 stage LPGforklift w/ sideshift, 155” lift, s/m N513119.

YALE, FRC120HON36SU110, 12,000 lbs. 2 stagebattery powered forklift, 152” lift, s/n 580137.

Miscellaneous EquipmentBAXTER VERTICUT, 115B, vertical bandsaw, s/n4118.ER MAIER, KM1012, vertical bandsaw, s/n 84797.JIB CRANE, floor standing, w/ 1 ton JET hoist.ESAB, migmaster, 250 amp mig welder.HYDRAULIC PRESS, 4 post, 85 ton (approx) 34"stroke

2 Available1997

1997

1994

HAAS, VF4, CNC VERTICAL MACHINING CENTRE

HYDRAULIC PRESS, 4 POST PRESS

12,000 LBSYALE 8000 LBS. LPG FORKLIFT

8,000 LBS

If you are unable to attend our sale, we would be pleased to act as your proxy. Please visit our website for

a proxy bid form or call our office at 416.366.2326

PROXY BIDDING

PARTIAL LISTINGSee website for full listing

YALE 12000 LBS. BATTERY POWERED FORKLIFT

Bid on-line at

1996

24”x80”

LIVE WEBCAST AUCTION Bid online @ www.platinumassets.com • LIVE WEBCAST AUCTION LIVE WEBCAST AUCTION • LIVE WEBCAST AUCTION • LIVE WEBCAST AUCTION

As instructed by BDO Dunwoody Limited, Trustee we will sell the assets of:

LIVE WEBCASTAUCTION

LIVE WEBCASTAUCTION

225 Edgely Blvd., Unit 1, Concord, Ontario Canada

Auction: Tuesday, October 2 @ 11:00 AMPreview: Monday, October 1, 9:00 AM - 5:00 PM and morning of sale

PLATINUMAsset ServicesPLATINUMAsset Serviceswww.platinumassets.com

Phone: 416.366.2326 • Fax: 416.366.23255205 Tomken Road, Mississauga, Ontario L4W 3N8

Auctioneers • Appraisers • Financiers

“Personal ized Serv ice. . .F inancia l Strength”

PLATINUMAsset ServicesPLATINUMAsset Serviceswww.platinumassets.com

Phone: 416.366.2326 • Fax: 416.366.23255205 Tomken Road, Mississauga, Ontario L4W 3N8

Auctioneers • Appraisers • Financiers

“Personal ized Serv ice. . .F inancia l Strength”

PRECISION MACHINING & REPAIRS LTD.

WMW-UNION, BFT-130/6, HORIZONTAL BORING MILL

1999

HWACHEON, ECOMIL-85V, CNC VERTICAL MACHINING CENTRE

TERMS OF SALE All goods are sold “As Is, Where Is”. Detailed sale terms and conditionsare available at www.platinumassets.com. This brochure is meant merelyas a guide. Platinum makes no guarantee, express or implied, as to theaccuracy of the information in this brochure. Buyers should inspect itemsbeforehand to satisfy themselves. All assets are subject to prior sale.

PAYMENT Payments must be made by Cash, Certified funds, Wire Transfer orCompany Check accompanied with a bank letter guaranteeingirrevocable payment to Platinum Assets Services Inc. in the follow-ing format: "NAME OF BANK hereby guarantees irrevocable paymentof checks payable to Platinum Asset Services Inc. up to AMOUNT INWORDS & CURRENCY for purchases made by our client NAME OFCLIENT. This letter is valid for purchases made at the auction ofNAME OF AUCTION being held in CITY, STATE/PROVINCE on Date.Accompanied with a signed company cheque." A buyers’ premiumwill be added to all purchases – 12.5% onsite and 15% online. A$500 refundable security deposit is required upon registration. A25% deposit is required at time of purchase, balance due by 2 pm,Wednesday October 3. NO EXCEPTIONS.

ONLINE BIDDERSOnline bidders must establish credit with Platinum. A 25% deposit ofyour anticipated bid amount must be forwarded to Platinum on orbefore October 1, 2007. If you are unsuccessful your deposit will berefunded with-in 72 hours of the completed auction.

REMOVAL TERMSPlease visit www.platinumassets.com for further details. All smallitems by Thursday October 4 at 4pm and larger items by TuesdayOctober 9. Removal daily from 8am-4pm. No items maybe removedduring the auction. NO EXCEPTIONS.

DIRECTIONS AUCTION SITE : 225 Edgely Blvd., Unit 1, Concord, Ontario, CanadaFrom Toronto PearsonProceed east on Hwy. 409 to Hwy. 401 east. 401 east to Hwy. 400 north,exit at Hwy 7. West on Hwy. 7. Left on Edgely. Proceed to #225. Lookfor auction signs

Prin

ted

in C

anad

a

Member In Good Standing Of:

This brochure is meant merely as a guide. Platinum makesno guarantee, expressed, or implied as to the accuracy ofthe information in this brochure. Buyers should inspect

the goods beforehand to satisfy themselves.

PLATINUMAsset ServicesPLATINUMAsset Serviceswww.platinumassets.com

Phone: 416.366.2326 • Fax: 416.366.23255205 Tomken Road, Mississauga, Ontario L4W 3N8

Auctioneers • Appraisers • Financiers

“Personal ized Serv ice. . .F inancia l Strength”

KIHEUNG, COMBI-V10Heavy Duty CNC Vertical Machining Centre

HEIDENHAIN ITNC530 CNC

System Control

BRANDNEW!BRANDNEW!

BRANDNEW!BRANDNEW!

TRAVELS; X-126", Y-42", Z-34, 142" X 44" WORK TABLE, 6000 RPM SPINDLE, 40 ATC

Miscellaneous Equipment (con’t)SHOP PRESS, 60 ton.GRANITE SURFACE PLATE, 9’ x 3’.CAMBELL HAUSFELD, C1Q710612, 7.5 hp, tankmounted piston type air compressor, s/nLJ/22/97-09876.BRUNER 5hp air compressor.

Quality Control and Tooling125+ lots of quality inspection equipmentincluding micrometer, verniers, collets, cuttingtools, etc..

Office EquipmentDesks, chairs, boardroom table, lateral and verticalfiling cabinets, MERIDIAN phone system, etc..

Vehicles1999 AUDI A4 2.8 Quattro. Single owner vehicle,Bose sound system, 210,000KM. Water pump andtiming belt just replaced. Like New...

VIEW OF INSPECTION EQUIPMENT

AUDI A4 2,8 QUATTRO

1999

PARTIAL LISTINGSee website for full listing

4 Wheel Drive

Machine Availble For Sale by Private Treaty

Bid on-line at

Bid on-line at

LIVE WEBCAST AUCTION Bid online @ www.platinumassets.com • LIVE WEBCAST AUCTION LIVE WEBCAST AUCTION • LIVE WEBCAST AUCTION • LIVE WEBCAST AUCTION

As instructed by BDO Dunwoody Limited, Trustee we will sell the assets of:

LIVE WEBCASTAUCTION

LIVE WEBCASTAUCTION

225 Edgely Blvd., Unit 1, Concord, Ontario Canada

Auction: Tuesday, October 2 @ 11:00 AMPreview: Monday, October 1, 9:00 AM - 5:00 PM and morning of sale

PLATINUMAsset ServicesPLATINUMAsset Serviceswww.platinumassets.com

Phone: 416.366.2326 • Fax: 416.366.23255205 Tomken Road, Mississauga, Ontario L4W 3N8

Auctioneers • Appraisers • Financiers

“Personal ized Serv ice. . .F inancia l Strength”

PLATINUMAsset ServicesPLATINUMAsset Serviceswww.platinumassets.com

Phone: 416.366.2326 • Fax: 416.366.23255205 Tomken Road, Mississauga, Ontario L4W 3N8

Auctioneers • Appraisers • Financiers

“Personal ized Serv ice. . .F inancia l Strength”

PRECISION MACHINING & REPAIRS LTD.

WMW-UNION, BFT-130/6, HORIZONTAL BORING MILL

1999

HWACHEON, ECOMIL-85V, CNC VERTICAL MACHINING CENTRE

TERMS OF SALE All goods are sold “As Is, Where Is”. Detailed sale terms and conditionsare available at www.platinumassets.com. This brochure is meant merelyas a guide. Platinum makes no guarantee, express or implied, as to theaccuracy of the information in this brochure. Buyers should inspect itemsbeforehand to satisfy themselves. All assets are subject to prior sale.

PAYMENT Payments must be made by Cash, Certified funds, Wire Transfer orCompany Check accompanied with a bank letter guaranteeingirrevocable payment to Platinum Assets Services Inc. in the follow-ing format: "NAME OF BANK hereby guarantees irrevocable paymentof checks payable to Platinum Asset Services Inc. up to AMOUNT INWORDS & CURRENCY for purchases made by our client NAME OFCLIENT. This letter is valid for purchases made at the auction ofNAME OF AUCTION being held in CITY, STATE/PROVINCE on Date.Accompanied with a signed company cheque." A buyers’ premiumwill be added to all purchases – 12.5% onsite and 15% online. A$500 refundable security deposit is required upon registration. A25% deposit is required at time of purchase, balance due by 2 pm,Wednesday October 3. NO EXCEPTIONS.

ONLINE BIDDERSOnline bidders must establish credit with Platinum. A 25% deposit ofyour anticipated bid amount must be forwarded to Platinum on orbefore October 1, 2007. If you are unsuccessful your deposit will berefunded with-in 72 hours of the completed auction.

REMOVAL TERMSPlease visit www.platinumassets.com for further details. All smallitems by Thursday October 4 at 4pm and larger items by TuesdayOctober 9. Removal daily from 8am-4pm. No items maybe removedduring the auction. NO EXCEPTIONS.

DIRECTIONS AUCTION SITE : 225 Edgely Blvd., Unit 1, Concord, Ontario, CanadaFrom Toronto PearsonProceed east on Hwy. 409 to Hwy. 401 east. 401 east to Hwy. 400 north,exit at Hwy 7. West on Hwy. 7. Left on Edgely. Proceed to #225. Lookfor auction signs

Prin

ted

in C

anad

a

Member In Good Standing Of:

This brochure is meant merely as a guide. Platinum makesno guarantee, expressed, or implied as to the accuracy ofthe information in this brochure. Buyers should inspect

the goods beforehand to satisfy themselves.

PLATINUMAsset ServicesPLATINUMAsset Serviceswww.platinumassets.com

Phone: 416.366.2326 • Fax: 416.366.23255205 Tomken Road, Mississauga, Ontario L4W 3N8

Auctioneers • Appraisers • Financiers

“Personal ized Serv ice. . .F inancia l Strength”

KIHEUNG, COMBI-V10Heavy Duty CNC Vertical Machining Centre

HEIDENHAIN ITNC530 CNC

System Control

BRANDNEW!BRANDNEW!

BRANDNEW!BRANDNEW!

TRAVELS; X-126", Y-42", Z-34, 142" X 44" WORK TABLE, 6000 RPM SPINDLE, 40 ATC

Miscellaneous Equipment (con’t)SHOP PRESS, 60 ton.GRANITE SURFACE PLATE, 9’ x 3’.CAMBELL HAUSFELD, C1Q710612, 7.5 hp, tankmounted piston type air compressor, s/nLJ/22/97-09876.BRUNER 5hp air compressor.

Quality Control and Tooling125+ lots of quality inspection equipmentincluding micrometer, verniers, collets, cuttingtools, etc..

Office EquipmentDesks, chairs, boardroom table, lateral and verticalfiling cabinets, MERIDIAN phone system, etc..

Vehicles1999 AUDI A4 2.8 Quattro. Single owner vehicle,Bose sound system, 210,000KM. Water pump andtiming belt just replaced. Like New...

VIEW OF INSPECTION EQUIPMENT

AUDI A4 2,8 QUATTRO

1999

PARTIAL LISTINGSee website for full listing

4 Wheel Drive

Machine Availble For Sale by Private Treaty

Bid on-line at

Bid on-line at