List of DIN standards.pdf

List of DIN standards

DIN 1 to DIN 99

DIN TITLE STATUS DIN REPLACEMENT OTHER ORG REPLACEMENT

DIN 1 Cone Pins, untempered Withdrawn DIN EN 22339 ISO 2339

DIN 3 Standard measurements Withdrawn

DIN 5 Technical drawings - Axonometric projections, Isometric projection Withdrawn

DIN ISO 5456-1, DIN ISO 5456-2, DIN ISO 5456-3, DIN ISO 5456-4

ISO 5456-1, ISO 5456-2, ISO 5456-3, ISO 5456-4

DIN 5-10 Technical drawings - projections, terms Withdrawn DIN ISO 10209-2 ISO 10209-2

DIN 6 Projection displays in Normal, views and special presentations Withdrawn DIN ISO 128, DIN EN ISO 128 ISO 128

DIN 7 Parallel Pins Withdrawn DIN EN ISO 2338 ISO 2338

DIN 11 Whitworth pipe threads 1/4"-6" Thread diameter, sizes, teaching information

Withdrawn

DIN 13-1

ISO general purpose metric screw threads - Part 1: Nominal sizes for coarse pitch threads; nominal diameter from 1 mm to 68 mm

Active

DIN 13-2 ISO general purpose metric screw threads - Part 2: Nominal sizes for 0,2 mm, 0,25 mm and 0,35 mm fine pitch threads; nominal diameter from

Active


1 mm to 50 mm

DIN 13-3

ISO general purpose metric screw threads - Part 3: Nominal sizes for 0,5 mm fine pitch threads; nominal diameter from 3,5 mm to 90 mm

Active

DIN 13-4

ISO general purpose metric screw threads - Part 4: Nominal sizes for 0,75 mm fine pitch threads; nominal diameter from 5 mm to 110 mm

Active

DIN 13-5

ISO general purpose metric screw threads - Part 5: Nominal sizes for 1 mm and 1,25 mm fine pitch threads; nominal diameter from 7,5 mm to 200 mm

Active

DIN 13-6

ISO general purpose metric screw threads - Part 6: Nominal sizes for 1,5 mm fine pitch threads; nominal diameter from 12 mm to 300 mm

Active

DIN 13-7

ISO general purpose metric screw threads - Part 7: Nominal sizes for 2 mm fine pitch threads; nominal diameter from 17 mm to 300 mm

Active

DIN 13-8


Active

DIN 13-9


Active


DIN 13-10


Active

DIN 13-11


Active

DIN 13-12

ISO general purpose metric screw threads - Part 12: 1 to 300 mm diameter coarse and fine pitch threads Selected diameters and pitches

Active

DIN 13-13

ISO general purpose metric screw threads - Part 13: Selected sizes for screws, bolts and nuts from 1 to 52 mm screw thread diameter and limits of sizes

Active

DIN 13-19 ISO general purpose metric screw threads - Part 19: Nominal profiles Active

DIN 13-20

ISO general purpose metric screw threads - Part 20: Limits of sizes for coarse pitch threads with the preferred tolerance classes; nominal sizes from 1 mm to 68 mm

Active

DIN 13-21

ISO general purpose metric screw threads - Part 21: Limits of sizes for fine pitch threads with the preferred tolerance classes; Nominal diameter from 1 mm to 24,5 mm

Active

DIN 13-22 ISO general purpose metric screw threads - Part 22: Limits of sizes for

Active


fine pitch threads with the preferred tolerance classes; Nominal diameter from 25 mm to 52 mm

DIN 13-23

ISO general purpose metric screw threads - Part 23: Limits of sizes for fine pitch threads with the preferred tolerance classes; Nominal diameter from 53 mm to 110 mm

Active

DIN 13-24


Active

DIN 13-25


Active

DIN 13-26


Active

DIN 13-28

ISO general purpose metric screw threads - Part 28: Coarse and Fine Screw Threads from 1 to 250 mm Screw Thread Diameter; Root Cross-sections, Tensile Stress Cross-sections and Pitch Angles

Active

DIN 13-50

ISO general purpose metric screw threads - Part 50: Combination of tolerance classes for formed internal screw threads

Active


DIN 13-51

ISO general purpose metric screw threads - Part 51: External screw threads for transition fits (former: screw threads for interference fit); tolerances, limit deviations, limits of sizes

Active

DIN 13-52 ISO general purpose metric screw threads - Part 52: Multi-start thread tolerances and deviation of profile

Active

DIN 16 Oblique Standard Typeface for Drawings Withdrawn

DIN 17 Upright Standard Typeface for Drawings Withdrawn

DIN 76-1 Thread run-outs and thread undercuts for ISO metric threads in accordance with DIN 13-1

Active

DIN 76-2 Thread run-outs and thread undercuts for pipe threads conforming to ISO 228 part 1

Active

DIN 76-3

Runouts, Undercuts for Trapezoidal Threads, Buttress Threads and Knuckle Threads and other Threads of Coarse Pitch

Active

DIN 78 Protrusions of bolt ends Active

DIN EN ISO 4753 (governs thread ends for bolts assembled with hexagon slotted nuts)

ISO 4753

DIN 84 Product grade A slotted cheese head Withdrawn DIN EN ISO 1207 ISO 1207


screws

DIN 85 Product grade A slotted pan head screws Withdrawn DIN EN ISO 1580 ISO 1580

DIN 93 Tab washers with long tab Withdrawn DIN EN ISO 1234 ISO 1234

DIN 94 Split pins Withdrawn DIN EN ISO 1234 ISO 1234

DIN 95 Slotted Raised Countersunk (Oval) Head Wood Screws Active

DIN 96 Slotted Round Head Wood Screws Active

DIN 100 to DIN 199

DIN TITLE STATUS DIN REPLACEMENT OTHER ORG

REPLACEMENT

DIN 103-1 ISO Metric Trapezoidal Screw Thread; Profiles

DIN 103-2 ISO Metric Trapezoidal Screw Thread; General Plan

DIN 103-3

ISO Metric Trapezoidal Screw Thread; Allowances and Tolerances for Trapezoidal Screw Threads of General Purpose

DIN 103-4 ISO Metric Trapezoidal Screw Thread; Nominal Dimensions


REPLACEMENT

DIN 103-5

ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Nut Threads from 8 to 100 mm Nominal Diameter

DIN 103-6

ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Nut Threads from 105 to 300 mm Nominal Diameter

DIN 103-7

ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Bolt Threads from 8 to 100 mm Nominal Diameter

DIN 103-8

ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Bolt Threads from 105 to 300 mm Nominal Diameter

DIN 103-9

ISO metric trapezoidal screw threads; gauging of external and internal threads; gauge dimensions and design features

DIN V 105-1 Clay masonry units - Part 1: Solid and hollow bricks with density classes of 1,2

Withdrawn DIN V 105-100, DIN EN 771-1 EN 771-1

DIN V 105-2 Clay masonry units - Part 2: Solid and hollow bricks with density classes equal 1.0

Withdrawn DIN V 105-100, DIN EN 771-1 EN 771-1

DIN 105-3 Clay masonry units - Part 3: Tile and high strength-high-strength clinker Withdrawn DIN V 105-100, DIN EN 771-1 EN 771-1


REPLACEMENT

DIN 105-4 Clay masonry units - Part 4: Ceramic bricks Withdrawn DIN V 105-100, DIN EN 771-1, DIN EN 772-7

EN 771-1, EN 772-7

DIN 105-5 Clay masonry units - Part 5: Lightweight long-hole brick and light long-hole brick panels

Active

DIN V 105-6 Clay masonry units - Part 6: High precision units Active

DIN V 105-100

Clay masonry units - Part 100: Clay masonry units with specific properties Active

DIN 125 Washers; medium type, primarily for hexagon bolts Withdrawn DIN EN ISO 7089, DIN EN ISO 7090

ISO 7089, ISO 7090

DIN 125-1 Product grade A washers - with a hardness up to 250 HV designed for use with hexagon head bolts and nuts

Withdrawn DIN EN ISO 7089, DIN EN ISO 7090 ISO 7089, ISO 7090

DIN 125-2 Product grade A washers - with a hardness up to 300 HV designed for use with hexagon head bolts and nuts


DIN 126 Product grade C washers - designed for use with hexagon head bolts and nut

Withdrawn DIN EN ISO 7091 ISO 7091

DIN 127 Spring lock washers with square ends or tang ends Withdrawn

DIN 128 Curved and wave spring lock washers Withdrawn


REPLACEMENT

DIN 137 Spring washers, curved or wave Withdrawn

DIN 200 to DIN 299


REPLACEMENT

DIN 201 Technical drawings; Hatchings; Representation of cutting edges and materials

Withdrawn DIN ISO 128-50 ISO 128-50

DIN 209 Machine Reamers with Screwed-on Blades Active

DIN 267-1 Fasteners - Part 1: Technical delivery conditions; General requirements Withdrawn

DIN 267-2

Fasteners - Part 2: Technical delivery conditions; Bolts, Screws, Nuts and Similar Threaded and Formed Parts; Types and Dimensional Accuracy

Active DIN EN ISO 4759-1 ISO 4759-1

DIN 267-3

Fasteners - Part 3: Technical delivery conditions; Property classes for carbon steel and alloy steel bolts and screws; Conversion of property classes

Withdrawn DIN EN ISO 898-1 ISO 898-1

DIN 267-4 Fasteners - Part 4: Technical delivery conditions; Property classes for nuts (previous classes)


DIN 267-5

Fasteners Part 5: Technical delivery conditions; Acceptance inspection; modified version of ISO 3269, 1984 edition



REPLACEMENT

DIN 267-6 Fasteners - Part 6: Technical delivery conditions; Designs and accuracy of measurement for product grade F

Active

DIN 267-7 Fasteners - Part 9: Technical delivery conditions; Bolts made of unalloyed or low-alloy steels


DIN 267-9 Fasteners - Part 9: Technical delivery conditions; Components with Electroplated Coatings


DIN 267-10 Fasteners - Part 10: Technical delivery conditions; Hot dip galvanized parts Withdrawn DIN EN ISO 10684 ISO 10684

DIN 267-11 Fasteners - Part 11: Technical delivery conditions (with additions to ISO 3506); Corrosion-resistant stainless steel fasteners

Withdrawn

DIN 267-12 Fasteners - Part 12: Technical delivery conditions; Self-tapping screws Withdrawn DIN EN ISO 2702 ISO 2702

DIN 267-13

Fasteners - Part 13: Technical delivery conditions; Components for Bolted Connections Made Mainly from Materials Exhibiting a High Impact Strength at Low Temperature or from Materials with a High Temperature Strength

Active

DIN 267-15 Fasteners - Part 15: Technical delivery conditions; Prevailing torque type nuts Withdrawn

DIN EN ISO 2320, DIN EN ISO 3506-1, DIN EN ISO 3506-2, DIN EN ISO 3506-3

ISO 2320, ISO 3506-1, ISO 3506-2, ISO 3506-3

DIN 267-18 Fasteners - Part 18: Technical delivery conditions; Components made of Non-

Withdrawn DIN EN 28839 ISO 8839


REPLACEMENT

ferrous Metals

DIN 267-19 Fasteners - Part 19: Technical delivery conditions; Surface discontinuities on bolts and screws

Withdrawn DIN EN ISO 26157-1, DIN EN ISO 26157-3 ISO 6157-1, ISO 6157-3

DIN 267-20 Fasteners - Part 20: Technical delivery conditions; Surface discontinuities on nuts Withdrawn DIN EN ISO 6157-2, DIN EN ISO 10484, DIN EN ISO 10485

ISO 6157-2, ISO 10484, ISO 10485

DIN 267-21 Fasteners - Part 21: Technical delivery conditions; Widening test on nuts Withdrawn DIN EN ISO 6157-2, DIN EN ISO 10484, DIN EN ISO 10485

ISO 6157-2, ISO 10484, ISO 10485

DIN 267-23 Fasteners - Part 23: Technical delivery conditions; Property classes for nuts with fine thread (ISO classes)


DIN 267-24 Fasteners - Part 24: Technical delivery conditions; Property classes for nuts (Hardness classes)

Active

DIN 267-25 Fasteners - Part 25: Technical delivery conditions; Torsion testing of M1 to M10 bolts and screws

Withdrawn DIN EN 20898-7 EN 20898-7

DIN 267-26 Fasteners - Part 26: Technical delivery conditions; Conical spring washers for bolt/nut assemblies

Active

DIN 267-27 Fasteners - Part 27: Technical specifications; Steel screws, bolts and studs with adhesive coating

Active

DIN 267-28 Fasteners - Part 28: Technical specifications; Steel screws, bolts and

Active


REPLACEMENT

studs with locking coating

DIN 267-29

Fasteners - Part 29: Technical specifications; Product grades for parts for bolted connections for use at temperatures ranging from -200C to +700C

Withdrawn

DIN 267-30 Fasteners - Part 30: Technical specifications; Metric thread rolling screws of property class 10.9

Active

DIN 276-1 Building costs; Part 1: Building construction Active

DIN 276-2 Building costs; Part 2: Classification of cost Withdrawn

DIN 276-3 Building costs; Part 3: Ascertainment of cost Withdrawn

DIN 300 to DIN 399


REPLACEMENT

DIN 315 Wing nuts with rounded wings Active

DIN 316 Wing screws with rounded wings Active

DIN 323-1 Preferred Numbers and Series of Preferred Numbers; Basic Values, Calculated Values, Rounded Values

Withdrawn


REPLACEMENT

DIN 323-2 Preferred Numbers and Series of Preferred Numbers; Introduction Active

DIN 332-1 60 centre holes; types R, A, B, and C Active

DIN 332-2 Center holes 60 with thread for shaft ends for rotating electrical machines Active

DIN 332-4 Centre holes for rail vehicles axles Active

DIN 332-7 Machine tools; 60 centre holes; dimensioning Active

DIN 332-8 Centre holes 90, form S; dimensions, determination process Active

DIN 332-10 Center Holes; Indications on Technical Drawings Withdrawn DIN ISO 6411 ISO 6411

DIN 338 Parallel shank twist drills, jobber series Active

DIN 400 to DIN 499


DIN 404 Slotted capstan screws Active

DIN 406-10 Engineering drawing practice; dimensioning; concepts and general principles

Active


DIN 406-11 Engineering drawing practice; dimensioning; principles of application

Active

DIN 406-12

Engineering drawing practice; dimensioning; tolerancing of linear and angular dimensions (modified version of ISO 406:1987)

Active

DIN 417 Slotted set screws with long dog point Withdrawn DIN EN 27435 ISO 7435

DIN 427 Slotted headless screws with chamfered end Withdrawn DIN EN ISO 2342 ISO 2342

DIN 428 Hexagon nuts, Grade C Withdrawn DIN EN ISO 4034 ISO 4034

DIN 433 Washers for use with cheese head screws Withdrawn DIN EN ISO 7092 ISO 7092

DIN 433-1 Product grade A washers - with a hardness up to 250 HV designed for use with cheese head screws


DIN 433-2 Product grade A washers - with a hardness up to 300 HV designed for use with cheese head screws


DIN 438 Slotted set screws with cup point Withdrawn DIN EN 27436 ISO 7436

DIN 439 Hexagon thin nuts Withdrawn DIN EN ISO 4035, DIN EN ISO 4036,DIN EN ISO 8675 ISO 4035, ISO 4036, ISO 8675


DIN 439-1 Unchamfered hexagon thin nuts - Product grade B Withdrawn DIN EN ISO 4036 ISO 4036

DIN 439-2 Chamfered hexagon thin nuts - Product grades A and B Withdrawn DIN EN ISO 4035, DIN EN ISO 8675 ISO 4035, ISO 8675

DIN 440 Washers for use in timber constructions Withdrawn DIN EN ISO 7094 ISO 7094

DIN 444 Eyebolts Active

DIN 461 Graphical Representation in Systems of Coordinates Active

DIN 462

Machine Tools; Internal Tab Washers for Slotted Round Nuts for Hook Spanner according to DIN 1804

Active

DIN 464 Knurled thumb screws, high type Active

DIN 466 Knurled nuts, high type Active

DIN 467 Knurled nuts, low type Active

DIN 471 Circlips (retaining rings) for shafts; Normal type and heavy type Active

DIN 476 Paper sizes Withdrawn DIN EN ISO 216 ISO 216

DIN 476-2 Trimmed Sizes of Paper - C Series Active


DIN 477

DIN 479 Square head bolts with short dog point Active

DIN 500 to DIN 599


REPLACEMENT

DIN 522 Metal washers; technical delivery conditions Withdrawn DIN EN ISO 4759-3 ISO 4759-3

DIN 548 Round nuts with set pin holes in side Active

DIN 551 Slotted set screws with flat point Withdrawn DIN EN 24766 ISO 4766

DIN 553 Slotted set screws with cone point Withdrawn DIN EN 27434 ISO 7434

DIN 555 M5 to M100x6 hexagon nuts - Product grade C Withdrawn DIN EN ISO 4034 ISO 4034

DIN 558 Hexagon head screws Withdrawn DIN EN ISO 4018 ISO 4018

DIN 580 Collar eyebolts for lifting purposes Active

DIN 600 to DIN 699


REPLACEMENT

DIN 601 M5 to M52 hexagon head bolts; product grade C Withdrawn DIN EN ISO 4016 ISO 4016

DIN 603 Mushroom head square neck bolts Active

DIN 609 Hexagon fits bolts with long thread Active

DIN 625-1 Rolling bearings; single row radial contact ball bearings Active

DIN 625-3 Rolling bearings; double row radial contact ball bearings Active

DIN 625-4 Rolling bearings; radial contact groove ball bearings with flanged outer ring Active

DIN 653 Knurled thumb screws, low type Active

DIN 678-1 Envelopes - Part 1: Sizes Active

DIN 678-2 Envelopes - Part 2: Envelopes for Processing in Enveloping Machines, Size C6 to C4

Active

DIN 700 to DIN 799


REPLACEMENT

DIN 763 Tested, non-calibrated, long-link round steel chains Active

DIN 764-1 Calibrated and tested round steel link chains for continuous conveyors; grade 2, pitch 3,5d

Active

DIN 764-2 Calibrated and tested round steel link chains for continuous conveyors; grade 3, pitch 3,5d

Active

DIN 766 Calibrated and tested grade 3 round steel link chains Active

DIN 799-1 Foundation Blocks Active

DIN 800 to DIN 899


REPLACEMENT

DIN12 820-1 Standards Work - Part 1: Principles Active

DIN 820-2 Standardization - Part 2: Presentation of standards; examples for presentation of figures, tables and part lists

Active

DIN 820-3 Standardization - Pdfart 3: Concepts Active

DIN 820-4 Standardization - Part 4: Working procedure Active


REPLACEMENT

DIN 820-11

Standardization - Part 11: Presentation of Standards concerning safety regulations which are VDE-Specifications or VDE-Guidelines

Active

DIN 820-12 Standardization - Part 12: Presentation of standards concerning safety regulations Active

DIN 820-13

Standardization - Part 13: Adoption of European documents of CEN, CENELEC and of ETSI; Concepts and presentation

Active

DIN 820-15

Standardization - Part 15: Implementation of ISO and IEC international documents; Concepts and presentation

Active

DIN 820-120 Standardization - Part 120: Guidelines for the inclusion of safety aspects in standards (ISO/IEC Guide 51:1999)

Active

DIN 824 Technical drawings; Folding to filing size Active

DIN 899 Hand Operated Wrenches and Sockets; Technical Specifications Withdrawn DIN ISO 1711-1 ISO 1711-1

DIN 900 to DIN 999


REPLACEMENT

DIN 908 Hexagon socket screw plugs with parallel screw thread Active

DIN 910 Hexagon-duty hexagon head screw plugs Active

DIN 911 Hexagon Socket Screw Keys Withdrawn DIN ISO 2936 ISO 2936

DIN 912 Hexagon socket head cap screws (modified version of ISO 4762) Withdrawn DIN EN ISO 4762, DIN EN ISO 21269

ISO 4762, ISO 21269

DIN 913 Hexagon socket set screws with flat point (ISO 4026 modified) Withdrawn DIN EN ISO 4026 ISO 4026

DIN 914 Hexagon socket set screws with cone point (ISO 4029 modified) Withdrawn DIN EN ISO 4027 ISO 4027

DIN 915 Hexagon socket set screws with full dog point Withdrawn DIN EN ISO 4028 ISO 4028

DIN 916 Hexagon socket set screws with cup point (ISO 4029 modified) Withdrawn DIN EN ISO 4029 ISO 4029

DIN 918 Fasteners; Terminology; Spelling of terms; Abbreviations Active

DIN 918-3 Overview of European Standards for fasteners Active

DIN 919-1 Technical Drawings; Wood Processing; Principles Active


REPLACEMENT

DIN 921 Slotted pan head screws with large head Active

DIN 923 Slotted pan head screws with shoulder Active

DIN 929 Hexagon weld nuts Active

DIN 930 Fine thread pitch partially threaded screws Withdrawn DIN 931-1, DIN 931-2

DIN 931-1 M1,6 to M39 Hexagon Cap Screws Partially Threaded - Product grades A and B


DIN 931-2 M42 to M160x6 Hexagon Cap Screws Partially Threaded - Product grade B Withdrawn DIN EN ISO 4014 ISO 4014

DIN 933 M1,6 to M52 Hexagon Cap Screws Fully Threaded - Product grades A and B


DIN 934 Hexagon nuts with metric coarse and fine pitch thread - Product classes A and B


DIN 935-1 Hexagon slotted nuts and castle nuts with metric coarse and fine pitch thread - Product grades A and B

Active

DIN 935-2 M42 to M160x6 hexagon head bolts; product grade B Active

DIN 935-3 Hexagon slotted nuts with metric coarse pitch thread - Product grade C Active


REPLACEMENT

DIN 936 M8 to M52 and M8x1 to M52x3 hexagon thin nuts; product grades A and B

Withdrawn

DIN 937 Hexagon thin castle nuts Withdrawn

DIN 938 Studs with a length of engagement equal to about 1 d Active

DIN 939 Studs with a length of engagement equal to about 1,25 d Active

DIN 946 Determination of coefficient of friction of bolt/nut assemblies under specified conditions


DIN 960 M8x1 to M100x4 hexagon head bolts with fine pitch thread - Product grades A and B


DIN 961 M8x1 to M52x3 hexagon head bolts with fine pitch thread - Product grades A and B


DIN 962 Designation system for fasteners Active

DIN 963 Slotted countersunk head screws (with countersunk heads as specified in ISO 2009-1972)


DIN 964 Slotted raised countersunk oval head screws Withdrawn DIN EN ISO 2010 ISO 2010


REPLACEMENT

DIN 965 Cross recessed countersunk flat head screws Withdrawn DIN EN ISO 7046-1, DIN EN ISO 7046-2

ISO 7046-1, ISO 7046-2

DIN 966 Cross recessed raised countersunk head screws Withdrawn DIN EN ISO 7047 ISO 7047

DIN 970 Hexagon nuts; Style 1; Metric coarse thread, Product grades A and B; ISO 4032 modified


DIN 971-1 Style 1 hexagon nuts with metric fine pitch thread; property classes 6 and 8 Withdrawn DIN EN ISO 8673 ISO 8673

DIN 971-2 Style 2 hexagon nuts with metric fine pitch thread; property classes 10 and 12 Withdrawn DIN EN ISO 8674 ISO 8674

DIN 972 M5 to M39 hexagon nuts; style 1; product grade C (modified version of ISO 4034)


DIN 975 Threaded rods Withdrawn

DIN 976-1 Metric thread stud bolts Active

DIN 976-2 Metric interference-fit thread stud bolts Active

DIN 977 Hexagon weld nuts with flange Withdrawn DIN EN ISO 21670 ISO 21670

DIN 979 Hexagon thin slotted nuts and castle nuts with metric coarse and fine pitch thread - Product grades A and B

Active


REPLACEMENT

DIN 980 All-metal prevailing torque type hexagon nuts Withdrawn DIN EN ISO 7042, DIN EN ISO 10513

ISO 7042, ISO 10513

DIN 981 Locknuts for use with rolling bearings Active

DIN 982 Prevailing torque type hexagon nuts with nonmetallic insert Withdrawn DIN EN ISO 7040, DIN EN ISO 10512

ISO 7040, ISO 10512

DIN 983 Retaining rings with lugs for use on shafts (external circlips) Active

DIN 985 Prevailing torque type hexagon thin nuts with nonmetallic insert Withdrawn DIN EN ISO 10511 ISO 10511

DIN 988 Shim rings and supporting rings Active

DIN 1000 to DIN 1999


REPLACEMENT

DIN 1025-1

Hot rolled I-sections - Part 1: Narrow flange I-sections, I-serie - Dimensions, masses, sectional properties

Active

DIN 1025-2

Hot rolled I-beams - Part 2: Wide flange I-beams, IPB-serie; dimensions, masses, sectional properties

Active

DIN 1025-3 Hot rolled I-beams; wide flange I-beams, light pattern, IPBl-serie; dimensions, masses,

Active


REPLACEMENT

sectional properties

DIN 1025-4

Hot rolled I-beams; wide flange I-beams heavy pattern, IPBv-serie; dimensions, masses, sectional properties

Active

DIN 1025-5

Hot rolled I-beams; medium flange I-beams, IPE-serie; dimensions, masses, sectional properties

Active

DIN 1301-1 Units - Part 1: Names and Symbols Active

DIN 1301-2 Units - Part 2: Submultiples and Multiples for General Use Active

DIN 1301-3 Units - Part 3: Conversions of Units No Longer To Be Used Active

DIN 1302 General Mathematical Symbols and Concepts Active

DIN 1303 Vectors, matrices, tensors; symbols and concepts Active

DIN 1304-1 Letter symbols for physical quantities - Part 1: Symbols for general use

Active

DIN 1304-2

Letter symbols for physical quantities - Part 2: Symbols for use in meteorology and geophysics

Active


REPLACEMENT

DIN 1304-3

Letter symbols for physical quantities - Part 3: Symbols for use in electric power engineering

Active

DIN 1304-5 Letter symbols for physical quantities - Part 5: Symbols for use in fluid mechanics

Active

DIN 1304-8

Letter symbols for physical quantities - Part 9: Symbols for use in the field of static converters using semiconductor devices

Active

DIN 1304-9

Letter symbols for physical quantities - Part 9: Symbols for equivalent circuits of piezoelectric crystals

Active

DIN 1311-1

(Mechanical) vibrations, oscillations and vibration systems - Part 1: Basic concepts, survey

Active

DIN 1311-2

(Mechanical) vibrations, oscillations and vibration systems - Part 2: Linear vibration systems with single degree of freedom

Active

DIN 1311-3

(Mechanical) vibrations, oscillations and vibration systems - Part 3: Linear time-invariant vibration systems with a finite number of degrees of freedom

Active


REPLACEMENT

DIN 1311-4 Vibration; Vibrating Continua, Waves Active

DIN 1313 Physical Quantities and Equation; Concepts, Methods of Writing

Active

DIN 1315 Angle; Concepts, Units Active

DIN 1318 DIN 1324-1 Electromagnetic Field - Part 1. State Quantities

Active

DIN 1324-2 Electromagnetic Field - Part 2. Material Quantities Active

DIN 1324-3 Electromagnetic Field - Part 3. Electromagnetic Waves Active

DIN 1325-1

Vocabulary for value management, value analysis and functional analysis - Part 1: Value analysis and functional analysis

Active

DIN 1325-2

Value Management, Value Analysis, Functional Analysis Vocabulary - Part 2: Value Management

Active

DIN 1332 Acoustics; Symbols Withdrawn DIN EN ISO 80000-8 ISO 80000-8

DIN 1333 Presentation of Numerical Data Active


REPLACEMENT

DIN 1338 Writing and Typesetting of Formulae Active

DIN 1355-1 Time; Calendar, Numbering of Weeks, Date of Day, (Clock) Time

Withdrawn

DIN 1421 Arrangement and Numbering in Texts; Clauses, Paragraphs, Enumerations

Active

DIN 1422-1

Publications in Sciences, Technology, Economy and Administration; Presentation of Manuscripts and Typoscripts

Active

DIN 1422-2

Publications in Sciences, Technology, Economy and Administration; Presentation of Clean Copies for Reprographic Use

Active

DIN 1422-3

Publications in Sciences, Technology, Economy and Administration; Typographical Presentation

Active

DIN 1422-4

Publications in Sciences, Technology, Economy and Administration; Presentation of Scientific and Technical Reports

Active

DIN 1440 Medium type washers for pins Withdrawn DIN EN 28738 ISO 8738

DIN 1443 Clevis pins without head Withdrawn DIN EN 22340 ISO 2340


REPLACEMENT

DIN 1444 Clevis pins with head Withdrawn DIN EN 22341 ISO 2341

DIN 1450 Legibility of Typefaces General Active

DIN 1451-1 Lettering - Linear-Antiqua without serifes General Active

DIN 1451-2 Typefaces - lineal Linear-Antiqua; lettering for transportation

Active

DIN 1451-3 Lettering - Linear-Antiqua without serifes; lettering for printing

Active

DIN 1451-4 Typefaces - lineal Linear-Antiqua; stenciled lettering for engraving and other processes

Active

DIN 1463-1

Guidelines for the Establishment and Development of Thesauri; Monolingual Thesauri

Active

DIN 1463-2

Guidelines for the Establishment and Development of Thesauri; Multilingual Thesauri

Active

DIN 1470 Grooved Pins, Full Length Parallel-grooved with Pilot Withdrawn DIN EN 8739 ISO 8739

DIN 1471 Grooved Pins, Full Length Taper-grooved Withdrawn DIN EN 8744 ISO 8744


REPLACEMENT

DIN 1472 Grooved Pins, Half Length Taper-grooved Withdrawn DIN EN 8745 ISO 8745

DIN 1473 Grooved Pins, Full Length Parallel-grooved with Chamfer Withdrawn DIN EN ISO 8740 ISO 8740

DIN 1474 Grooved Pins, Half Length Reverse-grooved Withdrawn DIN EN 8741 ISO 8741

DIN 1475 Grooved Pins, Third Length Centre-grooved Withdrawn DIN EN 8742 ISO 8742

DIN 1476 Round Head Grooved Pins Withdrawn DIN EN 8746 ISO 8746

DIN 1477 Countersunk Head Grooved Pins Withdrawn DIN EN 8747 ISO 8747

DIN 1481 Spring-Type Straight Pins (Roll Pins) - Heavy Type Withdrawn DIN EN ISO 8752 ISO 8752

DIN 1505-1

Bibliographic references to documents - Part 1: Full References to Printed and Published Documents

Active

DIN 1505-2 Bibliographic references to documents - Part 2: Rules for Citing

Active

DIN 1505-3

Bibliographic references to documents - Part 3: Indexes of cited documents (bibliographies)

Active


REPLACEMENT

DIN 1511 Pattern Equipment for Foundries; Production and Quality

Withdrawn DIN EN 12890 EN 12890

DIN 1530-1 Tools for moulding - Part 1: Ejector pins with cylindrical head

Active

DIN 1530-2 Tools for moulding - Part 2: Shouldered ejector pins Active

DIN 1530-3 Tools for moulding - Part 3: Ejector pins with conical head Active

DIN 1587 Hexagon domed cap nuts Active

DIN 1707 Soft Solders; Composition, Technical Delivery Condition Active DIN EN ISO 9453 ISO 9453

DIN 1712 Part 1

Aluminium and aluminium alloys - Unalloyed aluminium ingots for remelting Specifications


DIN 1712 Part 3

Aluminium; Half-Finished Products Withdrawn DIN EN 573-3 EN 573-3

DIN 1783 Strips, Plates and Sheets of Aluminium and Wrought Withdrawn DIN EN 485-4 EN 485-4

DIN 1786 Seamless Drawn Copper Tubes for Piping Systems Withdrawn DIN EN 1057 EN 1057


REPLACEMENT

DIN 1798 Round Rod of Aluminium (Highest Grade Aluminium) Withdrawn DIN EN 754-3 EN 754-3

DIN 1804 Slotted Round Nut for Hook Spanner; ISO Metric Fine Thread

Active

DIN 1810 Hook wrenches Active

DIN 1816 Round Nut with Set Pin Holes Inside; ISO Metric Fine Thread Active

DIN 1912-1 Graphical Representation of Welded, Soldered and Brazed Joints


DIN 1912-2 Graphical Representation of Welded, Soldered and Brazed Joints


DIN 1912-4

Graphical Representation of Welded, Soldered and Brazed Joints; Concepts and Terms for Soldered and Brazed Joints and Seams

Active

DIN 1912-5 Symbolic Representation on Drawings of Welded, Soldered and Brazed Joints


DIN 1960

Construction contract procedures (VOB) - Part A: General provisions relating to the award of construction contracts

Active


REPLACEMENT

DIN 1961

Construction contract procedures (VOB) - Part B: General conditions of contract relating to the execution of construction work

Active



REPLACEMENT

DIN 2112

Alphanumeric office machines - Alphanumeric keyboards, keyboard arrangement for manually operated typewriters

Withdrawn DIN 2137-1, DIN 2137-2

DIN 2127

Alphanumeric office machines; alphanumeric keyboards, keyboard arrangement for electro-mechanical operated typewriters

Withdrawn DIN 2137-1, DIN 2137-2

DIN 2137-1 Keyboards for data and text input - Part 1: German keyboard layout Active

DIN 2137-2 Keyboards for data and text input - Part 2: Additional requirements Active

DIN 2342-1 Vocabulary of terminology; basic concepts Active

DIN 2391-1 Seamless precision steel tubes - Part 1: Dimensions Canceled DIN EN 10305-1 EN 10305-1

DIN 2391-2 Seamless precision steel tubes - Part 2: Canceled DIN EN 10305-1 EN 10305-1


REPLACEMENT

Technical delivery conditions

DIN 2448 Seamless Steel Pipes and Tubes - Dimensions, Conventional Masses per Unit Length

Canceled DIN EN 10220 EN 10220

DIN 2527 Blank flanges - Nominal pressure 6 to 100 Withdrawn DIN EN 1092-1 EN 1092-1

DIN 2860 Capillary Fittings; Bends 180 of Copper Withdrawn

DIN 2999-1 Pipe threads for tubes and fittings; parallel internal thread and taper external thread; tread dimensions


DIN 2999-2

Whitworth Pipe Threads for Tubes and Fittings; Cylindrical Internal Thread and Conical External Thread, Gauging System and Use of Gauges


DIN 2999-3 Whitworth Pipe Threads for Tubes and Fittings; Gauge Dimensions Withdrawn DIN EN 10226-3 EN 10226-3

DIN 2999-4 Pipe threads for tubes and fittings; sizes for taper screw limit plug gauges for parallel internal thread


DIN 2999-5

Whitworth Pipe Threads for Tubes and Fittings; Cylindrical Screw Limit Ring Gauges for Gauging Conical External Threads, Sizes


DIN 2999-6 Whitworth Pipe Threads for Tubes and Fittings; Conical Screw Check Plugs, Sizes



DIN TITLE STATUS

DIN REPLACE

MENT

OTHER ORG

REPLACEMENT

DIN 4048-1 Water engineering, terms - Part 1: Dam plants Active

DIN 4048-2 Water engineering, terms - Part 2: Waterpower plants Active

DIN 4054 Correction of waterways, terms Active

DIN 4094-1 Subsoil, Field investigations - Part 1: Cone penetration tests Active

DIN 4102-1 Fire behaviour of building materials and elements - Part 1: Classification of building materials - Requirements and testing

Active

DIN 4102-2 Fire Behaviour of Building Materials and Building Components - Part 2: Building Components; Definitions, Requirements and Tests

Active

DIN 4102-3 Fire Behaviour of Building Materials and Building Components - Part 3: Fire Walls and Non-load-bearing External Walls; Definitions, Requirements and Tests

Active

DIN 4102-4 Fire behaviour of building materials and elements - Part 4: Overview and design of classified building materials, elements and components

Active

DIN 4102-5

Fire Behaviour of Building Materials and Building Components - Part 5: Fire Barriers, Barriers in Lift Wells and Glazings Resistant against Fire; Definitions, Requirements and Tests

Active

DIN 4102-6 Fire Behaviour of Building Materials and Building Components - Part 6: Ventilation Ducts; Definitions,

Active

DIN TITLE STATUS

DIN REPLACE

MENT

OTHER ORG

REPLACEMENT

Requirements and Tests

DIN 4102-7 Fire behaviour of building materials and elements - Part 7: Roofing - Concepts, requirements and testing Active

DIN 4102-8 Fire behaviour of building materials and components - Part 8: Small scale test furnace Active

DIN 4102-9 Fire behaviour of building materials and elements - Part 9: seals for cable penetrations; concepts, requirements and testing

Active

DIN 4102-11

Fire behaviour of building materials and building components - Part 10: pipe encasements, pipe bushings, service shafts and ducts, and barriers across inspection openings; terminology, requirements and testing

Active

DIN 4102-12 Fire behaviour of building materials and elements - Part 12: Fire resistance of electric cable systems required to maintain circuit integrity - Requirements and testing

Active

DIN 4102-13 Fire behaviour of building materials and elements - Part 13: Fire resistant glazing; concepts, requirements and testing

Active

DIN 4102-14 Fire behaviour of building materials and elements - Part 14: Determination of the burning behaviour of floor covering systems using a radiant heat source

Active

DIN 4102-15 Fire behaviour of building materials and elements - Part 15: "Brandschacht" Active

DIN 4102-16 Fire behaviour of building materials and elements - Part 16: "Brandschacht" tests Active

DIN TITLE STATUS

DIN REPLACE

MENT

OTHER ORG

REPLACEMENT

DIN 4102-17 Fire behaviour of building materials and elements - Part 17: determination of melting point of mineral fibre insulating materials; concepts, requirements and testing

Active

DIN 4102-18 Fire behaviour of building materials and components - Part 18: fire barriers, verification of automatic closure (continuous performance test)

Active

DIN 4102-22 Fire behaviour of building materials and building components - Part 22: Application standard for DIN 4102-4 based on the design of partial safety factors

Active

DIN 4108-1 Thermal protection and energy economy in buildings - Part 1: Quantities and units Active

DIN 4108-2 Thermal protection and energy economy in buildings - Part 2: Minimum requirements to thermal insulation Active

DIN 4108-3

Thermal protection and energy economy in buildings - Part 3: Protection against moisture subject to climate conditions; Requirements and directions for design and construction

Active

DIN 4108-7

Thermal insulation and energy economy of buildings - Part 7: Airtightness of building, requirements, recommendations and examples for planning and performance

Active

DIN 4108-10 Thermal insulation and energy economy in buildings - Part 10: Application-related requirements for thermal insulation materials - Factory made products

Active

DIN 4150-1 Structural vibration - Part 1: Prediction of vibration parameters Active

DIN TITLE STATUS

DIN REPLACE

MENT

OTHER ORG

REPLACEMENT

DIN 4150-2 Structural vibration - Part 2: Human exposure to vibration in buildings Active

DIN 4150-3 Structural vibration - Part 3: Effects of vibration on structures Active

DIN 4420-1 Service and working scaffolds - Part 1: Service scaffolds - Performance requirements, general design, structural design

Active

DIN 4512 Photographic sensitometry, determination of optical density: "Photographische Sensitometrie, Bestimmung der optischen Dichte" (1934-01, 1957-11, 1961-10)

Withdrawn

DIN 4512-1:1971-04, DIN 4512-3:1973-01, DIN 4512-4:1977-06, DIN 4512-5:1977-10, DIN 4512-6:1980-07

DIN 4512-1 Photographic sensitometry, determination of the speed of black and white negative materials for pictorial photography (1971-04, 1993-05)

Withdrawn (2000-09)

DIN ISO 6:1996-02 ISO 6

DIN 4512-3 Photographic sensitometry, determination of diffuse transmission density (1973-01) Withdrawn

DIN 4512-7:1993-01, DIN 4512-8:1993-01, DIN 4512-9:1993-01

DIN 4512-4 Photographic sensitometry; determination of the speed of colour reversal films (1977-06, 1985-08)

Withdrawn (2002-06)

DIN ISO 2240:1998-06 ISO 2240

DIN 4512-5 Photographic sensitometry; determination of the speed of Withdrawn DIN ISO ISO 5800

DIN TITLE STATUS

DIN REPLACE

MENT

OTHER ORG

REPLACEMENT

colour negative films (1977-10, 1990-11) (2002-06)

5800:1998-06

DIN 4512-6 Photographic sensitometry; sensitometric illuminants and light sources (1980-07) Withdrawn

DIN 4512-7 Photographic sensitometry, determination of optical density; concepts, symbols and notations (1993-01) Active

DIN 4512-8 Photographic sensitometry, determination of optical density; geometric conditions for transmission density (1993-01)

Active

DIN 4512-9 Photographic sensitometry, determination of optical density; spectral conditions (1993-01) Active

DIN 4512-10 Photographic sensitometry, determination of optical density; geometric conditions for reflection density (1993-01)

Active

DIN V 4701-10

Energy efficiency of heating and ventilation systems in buildings - Part 10: Heating, domestic hot water supply, ventilation

Active

DIN V 4701-12

Energetic evaluation of heating and ventilation systems in existing buildings - Part 12: Heat generation and domestic hot water generation

Active

DIN 4710 Statistics on German meteorological data for calculating the energyrequirements for heating and air conditioning equipment

Active



REPLACEMENT

DIN 5008 Rules for text presentation Active

DIN 5031-1

Physics of radiation in the field of optics and illuminating engineering - Part 1: Quantities, symbols and units of radiation physics

Active

DIN 5031-2

Physics of radiation in the field of optics and illuminating engineering - Part 2: Evaluation of radiation by different detectors

Active

DIN 5031-3

Physics of radiation in the field of optics and illuminating engineering - Part 3: Quantities, symbols and units of illuminating engineering

Active

DIN 5031-4 Physics of radiation in the field of optics and illuminating engineering - Part 4: Efficiencies

Active

DIN 5031-5 Physics of radiation in the field of optics and illuminating engineering - Part 5: Definitions for temperatures

Active

DIN 5031-6

Physics of radiation in the field of optics and illuminating engineering - Part 6: Pupil intensity as a measure of retinal illumination

Active

DIN 5031-7 Physics of radiation in the field of optics and illuminating engineering - Part 7: Terms for wavebands

Active


REPLACEMENT

DIN 5031-8

Physics of radiation in the field of optics and illuminating engineering - Part 8: Definitions and constants of radiation physics

Active

DIN 5031-9

Physics of radiation in the field of optics and illuminating engineering - Part 9: Definitions in the field of luminescence

Active

DIN 5031-10

Physics of radiation in the field of optics and illuminating engineering - Part 10: Photobiologically effective radiation, quantities, symbols and actions

Active

DIN 5035-3 Artificial lighting - Part 3: Lighting of health care premises Active

DIN 5035-6 Artificial lighting - Part 6: Measurement and evaluation Active

DIN 5035-7 Artificial lighting - Part 7: Lighting of interiors with visual displays work stations

Active

DIN 5035-8 Artificial lighting - Part 8: Workplace luminaries - Requirements, recommendations and proofing

Active

DIN 5145 Plane irons for wood smooth and for planes Active

DIN 5146 Curved irons for jack planes Active


REPLACEMENT

DIN 5406 Lockwashers and locking plates for use with rolling bearings Active

DIN 5466-1 Splined joints, calculation of load capacity - Part 1: general basis Active

DIN 5473 Logic and set theory; symbols and concepts Active

DIN 5474 Signs in mathematical logic Withdrawn DIN 5473

DIN 5475-1 Complex quantities; nomenclature Withdrawn DIN 5483-3

DIN 5483-1 Time-dependent quantities - Part 1: Terms for the time-dependency Active

DIN 5483-2 Time-dependent quantities - Part 2: Letter symbols Active

DIN 5483-3 Time-dependent quantities - Part 3: Complex representation of sinusoidal time-dependent quantities

Active

DIN 5486 Notation of matrices Withdrawn DIN 1303

DIN 5487 Fourier-, Laplace- and Z-transformation; symbols and concepts Active

DIN 5489

Directions and signs in electrical engineering; rules for electric and magnetic circuits, equivalent circuit diagrams



REPLACEMENT

DIN 5493-2 Logarithmic quantities and units - Part 2: Logarithmic ratios, levels in nepers and decibels

Active



REPLACEMENT

DIN 6319 Spherical washers and conical seats Active

DIN 6325 Parallel Pins, Hardened; Tolerance Zone m6 Withdrawn DIN EN ISO 8734 ISO 8734

DIN 6340 Washers for clamping devices Active

DIN 6738 Paper and paper board - Lifespan classes Active

DIN 6776 Technical drawings, labeling Withdrawn DIN EN ISO 3098 ISO 3098

DIN 6797 Toothed lock washers Withdrawn

DIN 6798 Serrated lock washers Withdrawn

DIN 6799 Lock washers (retaining washers) for shafts Active

DIN 6880 Bright Key Steel; Dimensions, Permissible Variations, Weights Active


REPLACEMENT

DIN 6885-1 Drive Type Fastenings without Taper Action Part 1: Parallel Keys, Keyways, Deep Pattern

Active

DIN 6885-2

Drive Type Fastenings without Taper Action Part 2: Parallel Keys, Keyways, Deep Pattern for Machine Tools, Dimensions and Application

Active

DIN 6885-3

Drive Type Fastenings without Taper Action Part 3: Parallel Keys, Shallow Pattern, Dimensions and Application

Active

DIN 6900 Screw and Washer Assemblies Withdrawn DIN EN 10644 EN 10644

DIN 6901 Tapping screw and washer assemblies Withdrawn DIN EN 10510 EN 10510

DIN 6902 Plain washers for screw and washer assemblies Withdrawn DIN EN 10673 EN 10673

DIN 6903 Plain washers for tapping screw and washer assemblies Withdrawn DIN EN 10669 EN 10669

DIN 6912 Hexagon socket thin head cap screws with pilot recess Active

DIN 6914 High-strength hexagon head bolts with large widths across flats for structural steel bolting


DIN 6916 Round washers for high-strength structural steel bolting Withdrawn


REPLACEMENT

DIN 6921 Hexagon flange bolts Withdrawn DIN EN 1665 EN 1665

DIN 6922 Hexagon flange bolts with reduced shank Withdrawn DIN EN 1665 EN 1665

DIN 6923 Hexagon nuts with flange Withdrawn DIN EN 1661 EN 1661

DIN 6924 Prevailing torque type hexagon nuts with nonmetallic insert Withdrawn DIN EN ISO 7040, DIN EN ISO 10512

ISO 7040, ISO 10512

DIN 6925 Prevailing torque type all-metal hexagon nuts Withdrawn DIN EN ISO 7042, DIN EN ISO 10513

ISO 7042, ISO 10513

DIN 6926 Prevailing torque type hexagon nuts with flange and with non-metallic insert

Withdrawn DIN EN 1663, DIN EN 1666 ISO 7043 (modified), ISO 12125(modified)

DIN 6927 Prevailing torque type all-metal nuts with flange Withdrawn DIN EN 1664, DIN EN 1667

ISO 7044 (modified), ISO 12126 (modified)



DIN 7045

Pan head screws with type H or type Z cross recess - product grade A

Active

DIN 7245 Saw blades for web saws Active


DIN 7337 Break mandrel blind rivets Withdrawn

DIN EN ISO 14589, DIN EN ISO 15977, DIN EN ISO 15978, DIN EN ISO 15979, DIN EN ISO 15980, DIN EN ISO 15981, DIN EN ISO 15982,DIN EN ISO 15983, DIN EN ISO 15984, DIN EN ISO 16582, DIN EN ISO 16583, DIN EN ISO 16584

ISO 14589, ISO 15977, ISO 15978,ISO 15979, ISO 15980, ISO 15981,ISO 15982, ISO 15983, ISO 15984,ISO 16582, ISO 16583, ISO 16584

DIN 7343 Spiral Pins; Normal Type Withdrawn DIN EN ISO 8750 ISO 8750

DIN 7344 Spiral Pins; Heavy Duty Type


DIN 7346

Spring-Type Straight Pins; (Roll Pins) Light-weight Type


DIN 7349

Plain Washers for Bolts with Heavy Clamping Sleeves

Active

DIN 7500-1

Thread rolling screws for metric ISO thread - Part 1: Types, designation, requirements

Withdrawn

ISO 7085

DIN 7500-2 Thread rolling screws for ISO metric thread; guideline values

Active


for hole diameters

DIN 7504

Self-drilling screws with tapping screw thread - Dimensions, requirements and testing

Withdrawn DIN EN ISO 10666,DIN EN ISO 15480, DIN EN ISO 15481,DIN EN ISO 15482, DIN EN ISO 15483

ISO 10666, ISO 15480, ISO 15481,ISO 15482, ISO 15483

DIN 7513

Hexagon head and slotted head thread cutting screws - Dimensions, requirements and testing

Active

DIN 7516

Cross recessed head thread cutting screws - Dimensions, requirements and testing

Active

DIN 7603 Ring seals and gaskets Active

DIN 7875

Diving accessories for skin divers; terminology

Withdrawn

DIN 7876

Diving accessories for skin divers; flippers. dimensions.

Withdrawn


requirements and testing)

DIN 7877

Diving accessories for skin divers; diver"s masks. requirements and testing

Withdrawn

DIN 7962

Cross recesses for screws; (modified version of ISO 4757)


DIN 7970

Threads and thread ends for tapping screws (modified version of ISO 1478)


DIN 7971 Slotted pan head tapping screws Withdrawn DIN ISO 1481 ISO 1481

DIN 7972

Slotted countersunk head tapping screws

Withdrawn DIN ISO 1482 ISO 1482

DIN 7973

Slotted raised countersunk head tapping screws


DIN 7977 Taper Pins with Thread Ends and Constant



Point Lengths

DIN 7978 Taper Pins with Internal Thread Withdrawn DIN EN 28737 ISO 8736

DIN 7979 Parallel Pins with Internal Thread


DIN 7980

Spring lock washers with square ends for cheese head screws

Withdrawn

DIN 7981 Cross recessed pan head tapping screws


DIN 7982

Cross recessed countersunk head tapping screws


DIN 7983

Countersunk (Flat) Head Tapping Screws with Cross Recess


DIN 7984 Hexagon socket thin head cap screws

Active

DIN 7985 Cross recessed raised cheese head screws



DIN 7991 Hexagon socket countersunk head cap screws




REPLACEMENT

DIN 8074 Polyethylene (PE) pipes Dimensions Active

DIN 8075 Polyethylene (PE) pipes - PE 63, PE 80, PE 100, PE-HD - General quality requirements, testing

Active

DIN 8513-1

Brazing and Braze Weld Filler Metals; Copper Base Brazing Alloys; Composition, Use, Technical Conditions of Delivery


DIN 8513-2

Brazing and Braze Weld Filler Metals; Silver-bearing Brazing Alloys with less than 20% by wt. Silver; Composition, Use, Technical Conditions of Delivery


DIN 8513-3

Brazing filler metals; silver brazing filler metals containing not less than 20 % of silver; composition, application, technical delivery conditions


DIN 8513-4

Brazing and Braze Weld Filler Metals; Aluminium-Base Brazing Alloys; Composition, Use, Technical Conditions of Delivery



REPLACEMENT

DIN 8513-5

Brazing filler metals; Nickel base filler metals for high temperature brazing; Application, composition, technical delivery conditions


DIN 8580 Manufacturing processes - Terms and definitions, division Active

DIN 8806-1 Narrow band saw blades for woodworking; dimensions Active



DIN 9021 Plain washers with large outside diameter Withdrawn DIN EN ISO 7093-1, DIN EN ISO 7093-2

ISO 7093-1, ISO 7093-2

DIN 10000 to DIN 10999


REPLACEMENT

DIN 10504 Food hygiene - Lamps for the lighting of meat and meat products Withdrawn

DIN 11000 to DIN 11999


REPLACEMENT

DIN 11850 Tubes for the food, chemical and pharmaceutical industry - Stainless steel tubes - Dimensions, materials

Active

DIN 12000 to DIN 12999


REPLACEMENT

DIN 12950-1 Laboratory furniture; safety cabinets for microbiological and biotechnological work; safety requirements, tests

Withdrawn

DIN 12950-2

Laboratory furniture; safety cabinets for microbiological and biotechnological work; containment of class 1 and class 2 cabinets, microbiological test

Withdrawn

DIN 12950-10

Laboratory furniture; safety cabinets for microbiological and biotechnological and biotechnological work; requirements and testing

Withdrawn

DIN 12975-1 Thermal solar systems and components - Solar collectors - Part 1: General requirements

DIN 12975-2 Thermal solar systems and components - Solar collectors - Part 2: Test methods

DIN 12976-1 Thermal solar systems and components - Factory made systems - Part 1: General requirements


REPLACEMENT

DIN 12976-2 Thermal solar systems and components - Factory made systems - Part 2: Test methods

DIN 13000 to DIN 13999


REPLACEMENT

DIN 13080 Division of hospitals into functional areas and functional sections Active

DIN 13260-2

Supply systems for medical gases - Part 2: Dimensions and allocation of probes and gas-specific connection points for terminal units for compressed medical gases and vacuum

Active

DIN 13432

Packaging - Requirements for packaging recoverable through composting and biodegradation - Test scheme and evaluation criteria for the final acceptance of packaging

Active DIN EN 13432

DIN 13715 Workpiece cornes and edges Active DIN ISO 13715(200012)

DIN 14000 to DIN 14999


REPLACEMENT

DIN 14090 Areas for the fire brigade on premises Active


REPLACEMENT

DIN 14096-1 Fire precaution regulation - Part 1: General and part A (placard); rules for drafting and placarding

Active

DIN 14096-2

Fire precaution regulation - Part 2: Part B (for persons without special tasks of fire prevention and fire fighting); rules for drafting

Active

DIN 14096-3

Fire precaution regulation - Part 3: Part C (for persons with special tasks of fire prevention and fire fighting); rules for drafting

Active

DIN 14210 Water pool for firefighting Active

DIN 14406-4 Portable fire extinguishers - Part 4: Maintenance Active

DIN 14503 Trailers for firefighting purposes, two-wheeled; general requirements Withdrawn DIN 14521

DIN 14505 Firefighting and rescue service vehicles - Vehicles for roller containers - General requirements

Active

DIN 14507 Rescue service vehicles - Vehicles for roller containers - General requirements

Active

DIN 14520 Trailers for portable fire pumps Withdrawn

DIN 14521 Firefighting - Trailer with removable foam-water monitor Active


REPLACEMENT

DIN 14530-5

Fire fighting vehicles - Part 5: Group pumping appliance LF 10/6, Group pumping appliance for rescue operations HLF 10/6

Active

DIN 14530-11

Fire fighting vehicles - Part 11: Group pumping appliance LF 20/16, Group pumping appliance for rescue operations HLF 20/16

Active

DIN 14530-16 Fire fighting vehicles - Part 16: Pumping appliance TSF Active

DIN 14530-17 Fire fighting vehicles - Part 17: Pumping appliance TSF-W Active

DIN 14530-21 Fire fighting vehicles - Part 21: Pump water tanker TLF 20/40, Pump water tanker TLF 20/40-SL

Active

DIN 14530-22 Fire fighting vehicles - Part 22: TLF 16/24-TR Active

DIN 14530-24 Fire fighting vehicles - Part 24: Small pumping appliance KLF Active

DIN 14530-25 Fire fighting vehicles - Part 25: Pumping appliance STLF 10/6 Active

DIN 14555-1 Vehicles carrying tools and gears - Part 1: General requirements Active

DIN 14555-3 Vehicles carrying tools and gears - Part 3: Emergency tender RW Active


REPLACEMENT

DIN 14555-12 Vehicles carrying tools and gears - Part 12: Damage control tender GW-G Active

DIN 14555-21 Vehicles carrying tools and gears - Part 21: GW-L1 for logistic tasks Active

DIN 14555-22 Vehicles carrying tools and gears - Part 22: GW-L2 for logistic tasks Active

DIN 14565 Fire hose tender; Type SW 2000-TR Withdrawn

DIN 14701-1 Turntable ladders and similar fire fighting vehicles; Purpose, concepts, safety equipment, requirements


DIN 14701-2 Turntable ladders and similar fire fighting vehicles; Turn table ladders, engine driven

Withdrawn DIN EN 14043, DIN EN 14044 EN 14043, EN 14044

DIN 14701-3 Turntable ladders and similar fire fighting vehicles; Rescue baskets Withdrawn DIN EN 1777 EN 1777

DIN 14702 Turntable ladder DL 16-4, hand operating Active

DIN 14703 Trailer Ladder AL 16-4 Active

DIN 14710-1 Hook ladder, manufactured using wood; with hinged hook Withdrawn DIN EN 1147 EN 1147

DIN 14710-3 Hook light metal ladder Withdrawn


REPLACEMENT

DIN 14711-1 Scaling ladder; made from wood Withdrawn DIN EN 1147 EN 1147

DIN 14711-2 Scaling ladder; made from light metal Withdrawn DIN EN 1147 EN 1147

DIN 14711-3 Scaling ladder; socket rungs and socket parts Withdrawn DIN EN 1147 EN 1147

DIN 14713 Folding ladder Withdrawn DIN EN 1147 EN 1147

DIN 14715-1 Three piece extension ladder made from wood Withdrawn DIN EN 1147 EN 1147

DIN 14715-2 Three piece extension ladder; made of light metal Withdrawn DIN EN 1147 EN 1147

DIN 15000 to DIN 15999


REPLACEMENT

DIN 15018-2 Cranes; steel structures; principles of design and construction Active

DIN 15185-1

Warehouse systems with guided industrial trucks; requirements on the ground, the warehouse and other requirements

Active

DIN 15185-2

Warehousesystems with powered industrials trucks; code of practice for the protection of persons when operating with trucks in narrow aisles; safety requirements, testing

Active


REPLACEMENT

DIN 15721 Film 70 mm; projection reel Active

DIN 16000 to DIN 16999


REPLACEMENT

DIN 16518 Classification of types Active

DIN 16892

Cross-linked high-density polyethylene (PE-X) pipes - General qualityrequirements and testing

Active

DIN 16893 Cross-linked high-density polyethylene (PE-X) pipes Dimensions

Active

DIN 17000 to DIN 17999


REPLACEMENT

DIN 17175 Seamless Tubes of heat Resistant Steels Withdraw DIN EN 10216-2

DIN 17410 Materials for permanent magnets: Technical conditions Active

DIN 17457

Withdraw DIN EN 10217-7


REPLACEMENT

DIN 17458

Withdraw DIN EN 10216-5

DIN 17471 Resistance alloys Active

DIN 18000 to DIN 18999


REPLACEMENT

DIN 18012 House service connections facilities - Principles for planning Active

DIN 18013 Recesses for meter boards (electric meters) Active

DIN 18014 Foundation earth electrode - General planning criteria Active

DIN 18015-1 Electrical installations in residential buildings - Part 1: Planning principles Active

DIN 18015-2 Electrical installations in residential buildings - Part 2: Nature and extent of minimum equipment

Active

DIN 18015-3 Electrical installations in residential buildings - Part 3: Wiring and disposition of electrical equipment

Active

DIN 18022 Domestic kitchens, bathrooms and WCs; design principles Withdrawn


REPLACEMENT

DIN 18024-1

Barrier-free built environment - Part 1: Streets, squares, paths, public transport, recreation areas and playgrounds - Design principles

Active

DIN 18024-2 Construction of accessible buildings - Part 2: Publicly accessible buildings and workplaces, design principles

Active

DIN 18065 Stairs in buildings - Terminology, measuring rules, main dimensions Active

DIN 18379

Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Installation of air conditioning systems

Active

DIN 18382

Contract procedures for building works - Part C: General technical specifications for building works; Low-voltage installation and medium-voltage installation with nominal voltages up to including 36 kV

Active

DIN 18384

Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV); Installation of lightningprotection systems

Active

DIN 18800-1 Steel structures - Part 1: Design and construction Withdrawn DIN EN 1993 DIN EN 1090

DIN 18800-2 Steel structures - Part 2: Analysis of safety against buckling of linear members and frames

Withdrawn DIN EN 1993


REPLACEMENT

DIN 18800-3 Steel structures - Part 3: Analysis of safety against buckling of plates Withdrawn DIN EN 1993

DIN 18800-4 Steel structures - Part 4: Analysis of safety against buckling of shells Withdrawn DIN EN 1993

DIN 18800-5 Steel structures - Part 5: Composite structures of steel and concrete - Design and construction

Withdrawn DIN EN 1994

DIN 18800-7 Steel structures - Part 7: Execution and constructor's qualification Active

EN 1090-2

DIN 19000 to DIN 19999


REPLACEMENT

DIN V 19222 Control technology Terminology Active

DIN 19225 Measurement and control; terminology and classification of controllers Active

DIN 19226-1 Control technology - Part 1: General terms and definitions Active

DIN 19226-2 Control technology - Part 2: Terms and definitions; dynamic systems behaviour

Active

DIN 19226-3 Control technology - Part 3: Terms and definitions of switching systems behaviour

Active


REPLACEMENT

DIN 19226-4 Control technology - Part 4: Terms and definitions of control systems Active

DIN 19226-5 Control technology - Part 5: Functional terms Active

DIN 19226-6 Control technology - Part 6: Terms and definitions of functional and constructional units

Active

DIN 19227-1

Control technology; graphical symbols and identifying letters for process control engineering; symbolic representation for functions

Active

DIN 19227-2

Control technology; graphical symbols and identifying letters for process control engineering; representation of details

Active

DIN 19237 Measurement and control; control engineering vocabulary Withdrawn

DIN 19226-3, DIN 19226-4, DIN 19226-5, DIN 19226-6

DIN 19227-1

Control technology; graphical symbols and identifying letters for process control engineering; symbolic representation for functions

Active

DIN 19227-2

Control technology; graphical symbols and identifying letters for process control engineering; representation of details

Active

DIN 19533 Pipe-lines of high-density PE (high-density polyethylene) and low-density

Withdrawn DIN EN 12201-1, DIN EN 12201-2,

EN 12201-1, EN 12201-2,


REPLACEMENT

PE (low density polyethylene) for drinking water supply; pipes, pipe connections and fittings for pipe-lines

DIN EN 12201-3, DIN EN 12201-5

EN 12201-3, EN 12201-5

DIN 19704-1 Hydraulic steel structures - Part 1: Criteria for design and calculation Active

DIN 19704-2 Hydraulic steel structures - Part 2: Design and manufacturing Active

DIN 19704-3 Hydraulic steel structures - Part 3: Electrical equipment Active

DIN 24000 to DIN 24999


REPLACEMENT

DIN 24190 Ventilation and air conditioning - folded and welded rectangular sheet metal ducts

Withdrawn

DIN 24340-2 Hydraulic valves; mounting surfaces and connecting plates for directionalcontrol valves

Active

DIN 28000 to DIN 28999


REPLACEMENT

DIN 28610-1 Ductile iron pressure pipes with socket with cement-mortar lining for gas and

Withdrawn DIN EN 545, DIN EN 969 EN 545, EN 969


REPLACEMENT

water pipelines; dimensions and masses

DIN 28610-2

Ductile iron pressure pipes with socket for gas and water pipelines rated for pressures over 4 bar up to and including 16 bar; dimensions and masses


DIN 30000 to DIN 39999


REPLACEMENT

DIN 30722-1

Roller contact tipper vehicles, roller containers - Part 1: Roller contact tipper vehicles up to 26 t, roller containers type 1570 made from steel

Active

DIN 30722-2


Active

DIN 30722-3


Active

DIN 30722-4 Roller containers for the transport on road and rail Active

DIN 31000 to DIN 31999


DIN 31635 Conversion of the Arabic alphabet Active

DIN 40000 to DIN 49999


REPLACEMENT

DIN 40015 Frequency and wave bands Active

DIN 40020 Guidelines for the user interface in multimedia equipment for general purpose use (IEC/TR 61997:2001)

Active

DIN 40050-9 Road vehicles; degrees of protection (IP-code); protection against foreign objects; water and contact; electrical equipment

Active

DIN 40101-1 Graphical symbols for use on equipment Withdrawn

DIN 40101-2 Graphical symbols for use on equipment; graphical symbols from ISO 7000 for electrical engineering

Active

DIN 40108 Electric power technology - Current systems - Concepts, quantities, letter symbols

Active

DIN 40110-1 Quantities used in alternating current theory - Part 2: Two-line circuits Active


REPLACEMENT

DIN 40110-2 Quantities used in alternating current theory - Part 2: Multi-line circuits Active

DIN 40146-1 Telecommunications - Part 1: Basic concepts Active

DIN 40148-1 Transmission systems and two-ports; concepts and quantities Active

DIN 40148-2 Transmission systems and two-ports; symmetry characteristics of linear two-ports

Active

DIN 40148-3 Transmission systems and two-ports; measures for attenuation Active

DIN 40200 Nominal value, limiting value, rated value, rating - concepts Active

DIN 41215 Electrical communication engineering; electromagnetic relays, definitions Withdrawn

DIN 41301 Electro Sheets; Magnetic Materials for Transformers Withdrawn

DIN 41309-1 Small transformers and chokes; strip-wound cut cores; types SM, SE, SU, SG and S3U; dimensions materials

Withdrawn

DIN 41309-2

Small transformers and chokes; strip-wound cut cores; technical conditions of delivery for one phase applications; types SM, SE, SU and SG

Withdrawn


REPLACEMENT

DIN 41309-3

Small transformers and chokes; strip-wound cut cores; technical conditions of delivery for three phase applications; type S3U

Withdrawn

DIN 41426 Nominal values of resistors and capacitors Withdrawn DIN IEC 60063 IEC 60063

DIN 41429 Colour code for fixed resistors Withdrawn DIN EN 60062 EN 60062

DIN 41524 Circular connectors for radio and associated sound equipment three and five-pole connectors

Withdrawn

DIN 41612-1 Two-part connectors for printed board, grid 2,54 mm; common mounting features; survey of types

Withdrawn DIN 41612-1 S1

DIN 41612-1 S1

Two piece connectors for printed circuits, grid 2,54 mm (0,1 in); general allusions Withdrawn DIN EN 60603-2 EN 60603-2

DIN 41612-2 Two-part connectors for printed boards; grid 2,54mm; dimensions of types B, C and D


DIN 41612-3 Two part connectors for printed boards; grid 2,54mm; dimensions of types F and G


DIN 41612-4 Two-part connectors for printed boards; grid 2,54mm, dimensions of type H Withdrawn DIN EN 60603-2 EN 60603-2

DIN 41612-5 Two-part connectors for printed boards; grid 2,54mm; ratings, requirements, tests Withdrawn DIN EN 60603-2 EN 60603-2


REPLACEMENT

DIN 41612-6 Two-part connection for printed boards; grid 2.54mm; dimensions of types Q, R and S


DIN 41612-7 Two-part connectors for printed boards; grid 2,54 mm; dimensions of types U and V


DIN 41612-8 Two-part connectors for printed boards; grid 2.54 mm; dimensions of type M Withdrawn DIN EN 60603-2 EN 60603-2

DIN 41612-8 S1

Two-part connectors for printed boards; grid 2.54 mm; dimensions of type M; survey of special contracts for use with type M


DIN 41612-9 Two-part connectors for printed boards; grid 2,54 mm; dimensions of type E Withdrawn DIN EN 60603-2 EN 60603-2

DIN 41612-10

Two-part connectors for printed boards; grid 2,54mm; gauges Withdrawn DIN EN 60603-2 EN 60603-2

DIN 41612-102

Two-part connectors for printed boards; dimensions for type X Withdrawn DIN 41612-9

DIN 41612-103

Two-part connectors for printed boards; dimensions of type M Withdrawn DIN 41612-8

DIN 41652-1 Rack and panel connectors, trapezoidal, round contacts 1 mm; common mounting features and dimensions; survey of types

Active

DIN 41652-2 Rack and panel connectors; trapezoidal, round contacts 1 mm; ratings, requirements, tests

Active


REPLACEMENT

DIN 41750-1

Rack and panel connectors, trapezoidal, round contacts 1 mm; common mounting features and dimensions; survey of types

Active

DIN 41750-2 Rack and panel connectors, trapezoidal, round contacts 1 mm; ratings, requirements, tests

Active

DIN 41750-3 Rack and panel connectors, trapezoidal, round contacts 1 mm; dimensions of type A; solder termination for free wiring

Active

DIN 41750-5 Rack and panel connectors, trapezoidal, round contacts 1 mm; dimensions of type C; crimp termination for free wiring

Active

DIN 41782 Guidelines for the presentation of published data Withdrawn DIN IEC 60747-2 IEC 60747-2

DIN 41786 Thyristors, definitions Withdrawn

DIN 41855 Semiconductor devices and integrated circuits; kinds of devices and general terms

Withdrawn

DIN 41855-2 Semiconductor devices and integrated circuits; optoelectronic semiconductor devices; terms and definitions

Withdrawn

DIN 41868 Cases 10 A 3 and 10 B 3 for semiconductor devices; main dimensions Withdrawn

DIN 41869-1 Case 23 A 3 for semiconductor devices; main dimensions Withdrawn


REPLACEMENT

DIN 41869-2 Cases 34 A 2 and 34 A 3 for semiconductor devices; main dimensions Withdrawn

DIN 41869-3 Case 11 A 3 and 11 B 3 for semiconductor devices; main dimensions Withdrawn




DIN 41869-7 Case type 15 for semiconductor devices; main dimensions Withdrawn

DIN 41873 Cases type 5 for semiconductor devices and integrated circuits Withdrawn

DIN 41876 Cases 18 A, B and C with 2 up to 4 terminals for semiconductor devices; main dimensions

Withdrawn

DIN 42400 Terminal markings for electrical equipment; general rules, alphanumeric system


DIN 42402 Terminal markings for power transformers and reactors Active

DIN 42403 Terminal markings for power converters Withdrawn DIN IEC 61148 IEC 61148


REPLACEMENT

DIN 42673-1

Totally enclosed fan-cooled three-phase induction motors squirrel-cage, type IM B 3, with rolling bearing; mounting dimensions and relationship frame sizes-output ratings

Withdrawn

DIN 42673-2

Totally enclosed fan-cooled three-phase induction motors with squirrel-cage, type IM B 3, with rolling bearings; relationship frame sizes - output ratings for type of protection increased safety "e"

Active

DIN 42673-3

Totally enclosed fan-cooled three-phase induction motors with squirrel-cage, type IM B 3, with rolling bearings; relationship frame sizes - output ratings for type of protection flameproof enclosure "d"

Active

DIN 42673-4

Totally-enclosed fan-cooled alternating-current polyphase motors with squirrel-cage, design B3, with ball bearings, maximum envelope dimensions

Active

DIN 42961 Rating plates for rotating electrical machinery; design Active

DIN 42973 Rated output values for rotating electrical machinery for continuous duty Active

DIN 43700

Measurement and control - Measurement and control instruments for panel mounting - Nominal front- and cut-out-dimensions

Withdrawn DIN IEC 61554 IEC 61554

DIN 43780 Electrical measuring instruments; direct acting indicating electrical measuring instruments and their accessories



REPLACEMENT

DIN 43802-2 Line scales and pointers for indicating electrical measuring instruments; general requirements

Active

DIN 43802-3 Line scales and pointers for indicating electrical measuring instruments; designs and dimensions

Active

DIN 43802-4 Line scales and pointers for indicating electrical measuring instruments; scale graduation and numbering

Active

DIN 43807

Measuring and control; electrical measuring instruments; terminal markings for switchboard meters, panel meters and measuring transducers for the measurement of power and power factor

Active

DIN 43856

Electricity meters, tariff time switches and ripple control receivers; connection diagrams, terminal marking, circuit diagrams

Active

DIN 43856-2 Electricity meters - Part 2: Marking of auxiliary terminals for tariff devices according to IEC-Report 61354:1995

Active

DIN 43870-1 Meter mounting boards; dimensions based on a grid system Active

DIN 43870-2 Meter mounting boards; functional area Active

DIN 43870-3 Meter panels; wirings Active

DIN 44070-1 Meter mounting boards; dimensions Active


REPLACEMENT

based on a grid system

DIN 44070-2 Meter mounting boards; functional area Active

DIN 44070-3 Meter panels; wirings Active

DIN 44070-4 Meter panels; cover for wiring Active

DIN 44080 Thermistors; PTC, technical terms and tests Withdrawn

DIN 44300 Information processing; vocabulary Withdrawn

DIN 44300-1 Information processing - Concepts - General terms Withdrawn

DIN 44300-2 Information processing - Concepts - Representation of data Withdrawn

DIN 44300-3 Information processing - Concepts - Data structures Withdrawn

DIN 44300-4 Information processing - Concepts Programming Withdrawn

DIN 44300-5 Information processing - Concepts - Components of digital computer systems Withdrawn

DIN 44300-6 Information processing - Concepts Storage Withdrawn


REPLACEMENT

DIN 44300-7 Information processing - Concepts Times Withdrawn

DIN 44300-8 Information processing - Concepts - Processing functions Withdrawn

DIN 44300-9 Information processing - Concepts - Process relations and modes of operation Withdrawn

DIN 45322 Circular connectors for radio and associated sound equipment; six-pole connectors


DIN 45323

Connectors for coupling an external low-voltage power to portable entertainment equipment (describes at least two DC coaxial power plugs)

Active

DIN 45500-1 High fidelity audio equipment and systems; minimum performance requirements; Part 1: general


DIN 45500-2 High fidelity audio equipment and systems; requirements for tuner equipments


DIN 45500-3 High fidelity audio equipment and systems; requirements for disk record reproducing equipments

Withdrawn

DIN 45500-4

High fidelity audio equipment and systems; minimum performance requirements for magnetic recording and reproducing equipment

Withdrawn


REPLACEMENT

DIN 45500-5 High fidelity audio equipment and systems; minimum performance requirements for microphones

Withdrawn

DIN 45500-6 High fidelity audio equipment and systems; minimum performance requirements for amplifiers


DIN 45500-7 High fidelity audio equipment and systems; requirements for loudspeakers Withdrawn DIN EN 61305-5 EN 61305-5

DIN 45500-8 High fidelity audio equipment and systems; for sets and systems Withdrawn

DIN 45500-10

High fidelity audio equipment and systems; minimum performance requirements for headphones

Withdrawn

DIN 45507 Measuring apparatus for frequency variations in sound recording equipment Withdrawn DIN IEC 60386 IEC 60386

DIN 45539

Disk record reproducing equipment; directives for measurements, markings and audio frequency connections, dimensions of interchangeable pickups, requirements of play back amplifiers

Withdrawn DIN IEC 60098 IEC 60098

DIN 45596 Microphones; phantom powering Withdrawn

DIN 46400-1

Steel flats with special magnetic properties cold rolled, non - oriented, finally annealed magnetic sheet and strip hysteresis loss at frequencies above 100 Hz



REPLACEMENT

DIN 46400-3 Grain-oriented magnetic steel and strip technical conditions Withdrawn DIN EN 10107 EN 10107

DIN 47100 Cords for telecommunication; code of insulated conductors, colour of sheath Withdrawn

DIN 47301-1 Terms of HF-lines Active

DIN 47301-2 Terms of HF-lines Active

DIN 47301-3 Definition of radio frequency transmission lines - mean characteristic impedance - mean standing wave ratio

Active

DIN 48803 Lightning protection system; Arrangement of components and dimensions for mounting

Withdrawn

DIN 48830 Lightning protection system; Description Withdrawn

DIN 50000 to DIN 59999


REPLACEMENT

DIN 51097

Testing of floor coverings; determination of the anti-slip properties: wet-loaded barefoot areas; walking method; ramp test

Withdrawn DIN 51130

DIN 51130 Testing of floor coverings; determination of the anti-slip properties: workrooms and fields of activities with slip danger,

Withdrawn DIN 51097


REPLACEMENT

walking method - ramp test

DIN 51501 Lubricants; Lubricating Oils L-AN; Minimum Requirements Withdrawn

DIN 52368 Testing of particleboards; determination of formaldehyde emission by gas analysis


DIN 53150 Paints and varnishes - Determination of the drying stage of coatings (modified Bandow-Wolff method)

Active

DIN 53438 Testing of combustible materials; response to ignition by small flame Active

DIN 53452 Testing of Plastics; Flexural Test Withdrawn DIN EN ISO 178 ISO 178

DIN 53575 Flexible Cellular Polymeric Materials - Determination of Tear Strength Withdrawn DIN EN ISO 8067 ISO 8067

DIN 54836 Testing of combustible materials; determination of ignition temperature Active

DIN 54837 Determination of burning behaviour using a gas burner Active

DIN 55003-3 Machine tools; symbols; numerically controlled machine tools Withdrawn

DIN 58810 Surgical implants; threads for bone screws and nuts Withdrawn


REPLACEMENT

DIN 58888 Thread connection for microscope objectives Withdrawn DIN ISO 8038-1 ISO 8038-1

DIN ISO 53438

DIN 60000 to DIN 69999


REPLACEMENT

DIN 66000 Information processing; switching algebra, mathematical signs and symbols Active

DIN 66001 Information processing; graphical symbols and their application Active

DIN 66002 Information processing; handwriting of the digit 0 and of the upper case letter O Active

DIN 66003 Information technology - 7-bit code Active

DIN 66004-1 Information processing - Coding on data media - Part 1: Representation of 7-bit code character sets on punched tape 25

Active

DIN 66004-2

Information processing - Coding on data media - Part 2: Representation of 7-bit coded and 8-bit coded character sets on punched cards

Active

DIN 66004-3

Information processing - Coding on data media - Part 3: Representation of 7-bit coded and 8-bit c