Lightrak Lighting Control System · BUSBAR SYSTEM: With the Intelligent Busbar System, the Buscom trunking itself becomes the lighting control unit. Lights and control devices plug

P O W E R E D B Y S P E C I A L I S T S

LIGHTRAK®

LIGHTING CONTROL SYSTEMPRODUCT GUIDE

LEGRAND’S POWER DISTRIBUTION BUSINESS UNIT

From Zucchini transformers, through high

power distribution and rising main busbar to

Electrak powertrack, desk modules and lighting

control, Legrand’s power distribution business

unit provides market leading solutions to the

increasing demands of today’s buildings.

Legrand is the global specialist in

electrical and digital building

infrastructures. Innovation is the

driving force behind its development.

With an increasing investment in research and

development (circa 5% of sales) and more than

4,000 active patents, the Legrand Group is focused

on maintaining a high rate of new product launches

that present innovative solutions to the market.

built on localknowledge

Global strength

CSRUSERS- Provide sustainable solutions- Play a driving role in

the electrical sector

SOCIETY- Act ethically- Ensure responsible purchasing- Enable access to electricity for all

EMPLOYEES- Respect human rights- Guarantee health and safety at work- Develop skills and promote diversity

ENVIRONMENT- Reduce the Group’s

environmental footprint- Innovate for a circular

economy

CORPORATE SOCIAL RESPONSIBILITY

Legrand’s CSR roadmap is a natural extension

to the governance and sustainable development

approach in which the company has been

engaged for many years. The CSR roadmap

firmly asserts Legrand’s ongoing commitment

to sustainable development.

1

CO

NTE

NTS

LEGRAND ENERGY EFFICIENCYLegrand is a capable and reliable supply partner that:

• delivers innovation

• offers market leading low carbon solutions

• delivers very high standards of corporate responsibility

Legrand has long been committed to an initiative to protect the environment. This commitment

concerns both the Group's sites and the life cycle of products, from their design to the end of

their life. As a world-leading specialist in electrical and digital infrastructures for buildings,

Legrand is dedicated to ensuring that everyone can use electricity in a sustainable way.

By working together we can create solutions that deliver less carbon to the environment.

LIGHTRAK

Overview 6

Ordering information 14

Technical information 16

BUSCOM

Overview 4

Ordering information:

Intelligent busbar system 22

Electrak 30-33 systems 24

Technical information 38

INTRODUCTION

Electrak the specialist in power distribution throughout the workplace 2

2

ELECTRAK® the specialist in power distribution throughout the

workplace

Electrak, a brand of the Legrand

Group in the UK, is a leading

name in power distribution and

lighting control solutions.

Electrak busbar systems, floor boxes, floor

grommets, desk modules and lighting control

ranges are installed in high specification offices

around the world.

3

UNDERFLOOR POWER

Electrak’s powertrack system is perfect for

supplying underfloor power in cavity floor

installations. With minimal parts, push fit

assembly and a complementary range of floor

boxes, this flexible, easy-to-install system can

be reconfigured as office layouts evolve.

Powering the

workplace

POWERTRACK

BUSCOM

power and data backbone

See page 24

CAVITY FLOOR BOXES

LIGHTRAK

lighting control system

See page 14

FULLY ADDRESSABLE

LIGHTING CONTROL

Designed to work in harmony with Buscom

trunking, Lightrak lighting control offers

high-end sophistication with unbeatable

flexibility and speed of installation.

FLOOR GROMMETS INTERSOC-R INTERSOC ON-DESK

WORKSTATION POWER

Electrak’s access grommets provide the gateway

for power to feed from the underfloor powertrack

network to the workstation, where all desk power

requirements are met with our new range of desk

modules, Intersoc-R and Intersoc on-desk.

Buscom trunking a unique power and data backbone

Buscom is at the heart of Electrak’s lighting control solutions...

distributing both power and communications within a single busbar

trunking system, it provides a flexible and simple alternative to

traditional wiring installations.

THE HEART OF YOUR LIGHTING

CONTROL SYSTEM

Installing a matrix of Buscom trunking in the ceiling

void creates an accessible power and communications

backbone. The backbone can be tapped into at any point

to facilitate instant connection to power and control

circuits. Buscom incorporates a shielded twisted pair

communications bus, and is suitable for use with any

lighting control protocol.

MODULAR. FLEXIBLE. SIMPLE.

Trunking lengths simply push-fit together, saving time

and money on installation. With cable terminations only

required for power and control circuits in the feed unit,

Buscom delivers an adaptable and robust plug and play

solution that allows for future lighting layout changes

to be made quickly and efficiently, whilst drastically

reducing the potential points of failure in comparison

with traditional wiring methods.

• Power and communications within a single

trunking system

• Suitable for use with: KNX, LonWorks,

DALI and more

• Fast to install, easy to adapt

• Robust system with minimal potential points

of failure

Buscom is available in many different configurations, meaning separate circuits can be available for many different requirements like lighting, HVAC, comms bus, DALI etc.

The installation time of Buscom is

comparable to installing a cable

containment system, but with Buscom

the job of pulling, prepping and

terminating the cables is already done,

saving a considerable amount of time.

Examples of power only configurations

Introducing a KNX bus Introducing a DALI bus

Buscom also uniquely incorporates a

shielded twisted pair meaning a bus

connection (e.g. KNX) can be available at

every tap-off outlet, making it perfect for

networked lighting control installations.

Live 1

Neutral 1

Live 3

Live 2

Live 1

Neutral

Live 1

Neutral 1

Neutral 2

Live 2

Neutral 3

Live 3

Neutral 4

Live 4

Live 2

Neutral 2

Live 1

Neutral 1

Buscom can even be configured to incorporate a DALI

bus as well as KNX, providing the perfect solution for

DALI lighting control over a KNX backbone. There is also

the option for a second electrical circuit dedicated to

mechanical power supply.

KNX Bus

Live 2

Neutral 2

Live 1

Neutral 1

KNX Bus

DALI + ive

DALI - ive

Live

Neutral

KNX Bus

DALI + ive

DALI - ive

Live 1

Neutral 1

Neutral 2

Live 2

5

6

Lightrak®

a uniquely adaptable lighting control systemDesigned to work in harmony with Electrak’s Buscom trunking,

Lightrak lighting control systems offer high end sophistication

with unbeatable flexibility and speed of installation.

PLUG AND PLAY With Lightrak, lighting control modules come

pre-wired with tap-offs and pre-fitted with brackets,

meaning the installation is as simple as snapping on,

and plugging in.

SOPHISTICATED TECHNOLOGY Lightrak offers fully addressable DALI control,

networked over a KNX backbone. The scalability of

KNX enables full building-wide lighting control and

seamless connectivity with KNX devices from over

300 manufacturers.

COMPREHENSIVE RANGE OF

LIGHTING CONTROL DEVICES

Wide ranging offer of energy saving switching,

sensing and scheduling devices. Including infrared,

ultrasonic and microwave detectors offering presence

or absence detection and constant luminance with

daylight linking.

A CONNECTED SYSTEM Lightrak is PC configurable and can be integrated

onto IP or BMS networks meaning lighting installations

can be controlled, tested and monitored either locally,

or remotely via the internet.

7

A CHOICE OF SYSTEM ARCHITECTURES

The new Lightrak KNX/DALI controller has been updated

with the latest electronic components and its size has

been reduced to fit into this neat modular format.

TRADITIONAL LCM SOLUTION:

The modular controller plugs into an eight outlet distribution box,

which creates a KNX/DALI Lighting Control Module (LCM).

INTELLIGENT BUSBAR SYSTEM:

The modular controller plugs into a Buscom Control Unit,

which injects DALI onto the Buscom, creating a KNX/DALI

intelligent busbar system.

Luminaires plug into the LCM via GST leads:

KNX Bus

Live

Neutral

KNX Bus

DALI + ive

DALI - ive

Live

Neutral

Luminaires plug into the intelligent

busbar system via tap-off leads:

EXTRA CAPACITY FOR AN INTELLIGENT BUSBAR

A DALI break interlink can be used to split a DALI

circuit in two, while continuing the power and KNX

circuits. An additional controller can then be added

to double the number of DALI addresses.

A DALI distribution box can be plugged in to turn

one tap-off outlet into eight GST outlets if required.

A range of tee-modules and extender sub-cables is

also available if it is more practical to daisy chain.

into an e g

ighting Control Mod

uscom,

8

ENERGY EFFICIENCY

The Lightrak system operates over a KNX backbone.

This enables all control devices connected to the

system to communicate with each other, and facilitates

seamless interoperability with any KNX certified product.

KNX PROTOCOL SYSTEMS

KNX is the worldwide standard for all applications in

home and building control, ranging from lighting and

shutter control to security, HVAC, metering and energy

management. With more than 370 members, the KNX

Association holds partnership agreements with over

44,000 installer companies in 128 countries. All products

bearing the KNX logo are certified in order to guarantee

system compatibility, interworking and interoperability

and are commissioned via a single, manufacturer

independent design and commissioning tool.

KNX IS APPROVED AS:

• European Standard (CENELEC EN 50090 and

CEN EN 13321-1)

• International Standard (ISO/IEC 14543-3)

For more information about KNX, visit: www.knx.org

Lighting accounts for up to 40% of a commercial building’s electricity use(Lighting Industry Federation)

Lighting controls can provide energy savings of 30% to 55%.

LEFT: KNX was used as the underlying technology at Terminal 5, Heathrow... possibly the largest lighting control installation in Europe

Lightrak®

seamless integration with your technology of choice

9

DELIVERING DALI EMERGENCY

FEEDBACK

The KNX/DALI lighting controller incorporates a KNX to

DALI interface that enables full DALI control in addressable

mode, and also facilitates the feedback from the DALI

network back onto the KNX bus.

Utilising widely available KNX gateways, this DALI feedback

can then be fed into building management systems (BMS)

or other monitoring and reporting software, allowing

emergency lighting test data to be logged and alarms

raised should essential maintenance be required.

DALI FEATURE IMAGE

For more information about DALI, visit: www.dali-ag.org

DALI: DIGITAL LIGHTING CONTROL

DALI (Digital Addressable Lighting Interface) is a

protocol dedicated purely to lighting control, as set

out in the technical standard IEC 62386. Each unit in

a DALI network has its own address, allowing direct

communication with each individual fitting.

TECHNICAL FEATURES

The information flow with DALI is bi-directional.

Rather than only giving commands about the light level

from the control system to the fitting, DALI also enables

information feedback on the condition of the fittings.

The fitting can transmit information related to:

• whether the light is switched on or off

• the preset light level

• the ballast condition

Therefore DALI is ideal for use with building automation

systems where remote supervising and service reports

are required.

10

Lightrak takes plug and play adaptability to the next level. Once Buscom

is installed, lighting and control devices just plug in to the nearest outlet.

Should the use or configuration of a space change, components can simply

be unplugged, moved and the system reprogrammed – or additions can be

plugged into the bar as required.

With Lightrak, developers can install a cost-effective lighting control solution

that is adequate for the initial category-A development, but can be upgraded

to meet the category-B needs of incoming tenants with a minimum level of

investment in time and labour.

TRADITIONAL LCM SOLUTION:

Lightrak’s plug and play intelligence

ensures the system is adaptable,

easy to upgrade and future-proof.

Lighting schemes can be completely

reconfigured without the need to run

or terminate any additional circuits.

This example demonstrates just

how easy it is to upgrade a system

from category-A to category-B by

simply moving or plugging in extra

components.

The ability to adaptwith the building throughout its life

NAL LCM

11

INTELLIGENT BUSBAR SYSTEM:

With the Intelligent Busbar System,

the Buscom trunking itself becomes

the lighting control unit. Lights and

control devices plug directly into the

bar via tap-offs. This solution delivers

neat installation with the short

connection cables, enabling full DALI/

KNX control in the most efficient way

possible.

18TH EDITION IET WIRING REGULATIONS BS 7671:2018, the IET Wiring Regulations 18th Edition pushes for better support of cables to prevent

their premature collapse in the event of fire. Regulation 521.10.202 replaces regulation 521.11.201

and extends this requirement beyond escape routes to cables throughout the installation. Busbar

systems drastically reduce the amount of cable used within an installation and can help to comply with

this latest regulation. With the launch of the new Intelligent Busbar System, Lightrak can now deliver

power and control to lighting with even less cable, as being able to plug in anywhere along the bar

means that luminaire connection cables can now be even shorter.

NT

12

supporting you from initial design through installation and beyond

AN OPEN PROTOCOL

KNX is an open protocol meaning lighting control units can either be supplied

unprogrammed for third party system integration, or we can deliver a full in-house

project design and commissioning service. Our experienced team can provide support

at all stages of a project, from the outline brief through to final site commissioning.

Legrand

13

DEDICATED DESIGN TEAM

Designing a Lightrak system is simple but working

with our team of experts can ensure that the Buscom

layout is optimised along with the power and bus

configuration. The team can guide and help you to design

a fully functioning lighting control system proposing the

most efficient solutions for functionality, arrangement

and system architecture.

CONTINUING SUPPORT

Support will continue throughout the project.

KNX commissioning is done in the factory and layout and

schematics drawings are delivered with the system so

the installers know where every component needs to go.

The on-site commissioning team will then be at hand to

finalise the DALI addressing and ensure that the system is

functioning as expected before final sign off.

MANAGING AND MAINTAINING

A graphical headend can be provided for

navigation, visualisation and monitoring of

the lighting and energy usage. Emergency

lighting tests can be scheduled and the results

harvested and logged. Fault statuses will be

visualised and alerts can be systematically sent

to the maintenance team. The headend can be

connected to the internet facilitating local or

remote management and maintenance.

14

Lightrak® KNX / DALI lighting control systemsystem components, lighting control units (LCUs) and sub-cabling to luminaires

Pack Cat. Nos. Lightrak – Sub-cabling for use with LCMs

Luminaire connection leads

1 BVITM6L503100W 6 pole, 5 core, 3 m, 1 mm2, LSF 1 BVITM6L505100W 6 pole, 5 core, 5 m, 1 mm2, LSF 1 BVITM6L508100W 6 pole, 5 core, 8 m, 1 mm2, LSF

Extender leads for daisy chaining

1 BVITM6-L5T500 Tee module 6 pole, 5 core, 0.5 m lead, 1 mm2

1 BVITM6-5-LL-03 Extender lead 6 pole, 5 core, 3 m, 1.5 mm2, LSF



Connection plugs for hard wiring

1 BVITM6-LPW 6 pole, male connector 1 BVITM6-LPW-F 6 pole, female connector

Pack Cat. Nos. Lightrak – System components

1 FFA001 Statutory warning plaque

1 FFA004 Timed event controller (flush)

1 FFA006 Timed event controller (surface)

1 FFA020 Line power supply, wall mounted

1 FFA021 Powered line coupler, wall mounted

1 FFA022 Buscom mounted power supply unit

1 FFA024 KNX/IP gateway with router

1 FFA025 KNX to USB interface

1 FFA026 Commissioning tool

1 FFA014 Signal cable 100 m

Connection kit for use with Lightrak commissioning tool

1 FFG350 Power and communications connection kit

Lightrak – KNX/DALI lighting control unit

1 FFD062 Modular KNX/DALI lighting controller

Lightrak – distribution boxes

Distribution boxes for use with FFD062 to

create LCMs

1 FFDDDB DALI distribution box surface mountable (for use without Buscom)

1 FFDDDB1 DALI distribution box with 8 GST outlets Buscom mountable with WHITE tap-off 10 A fused L, N, E + KNX

Buscom control unit for use with FFD062 to

create intelligent busbar

1 FFDBCU DALI Buscom control unit Buscom mountable with BLUE tap-off 10 A fused L, N, E, D + D - KNX

DALI distribution box for use with intelligent

busbar system when extra outlets are

required

1 FFDDDB2 DALI distribution box with 8 GST outlets Buscom mountable with BLUE tap-off 10 A fused L, N, E D + D - KNX

Lightrak – Graphical headend and emergency lighting monitoring centre

1 HEADEND Project bespoke solution

Proprietory lighting control system to work alongside Electrak’s 25 and 40 A Buscom trunking with integral communications busOffers high speed installation and unrivaled flexibility for future reconfiguration. PC configurable and integratable Based on the KNX open protocol and compatible with DALI lighting installations Designed and manufactured in the UK

Modular KNX/DALI lighting controller

FFD062

Dimensions and technical information p. 16-21

DALI distribution

box

FFDDDB1

Powered line coupler

FFA021

DALI Buscom

control unit

FFDBCU

Connection plug for hard wiring - 6 pole,

male connector

BVITM6-LPW

Connection plug for hard wiring - 6 pole,

female connector

BVITM6-LPW-F

15

Lightrak® KNX / DALI lighting control systemsensors and switching devices

Pack Cat. Nos. Lightrak – Switching devices

KNX Arteor devices

1 0784 95 Single switch

1 0784 96 Double switch

1 5742 03 4 button scenario switch 1 0784 93 Wall mounting sensor

Arteor surround plates

1 7300 92 White surround plate 1 gang – 2 modules

1 7300 94 White surround plate 2 gang – 4 modules

1 8330 92 Brushed stainless steel surround plate 1 gang – 2 modules

1 8330 94 Brushed stainless steel surround plate 2 gang – 4 modules

Zigbee/KNX wireless devices

1 0784 61 White wireless switch – 1 button - 2 actuation points

1 0488 77 Zigbee/KNX interface

1 0883 09 Zigbee wall mounting sensor

Other switching devices

1 7354 14 Synergy grid 2 way retractive switch

1 7354 16 Synergy grid 2 way key switch

1 7301 91 Synergy grid front plate 1 gang – white

1 8331 91 Synergy grid front plate 1 gang – brushed stainless steel

1 7354 90 Synergy grid support frame

KNX switching devices connect into the system via KNX tap-off straight into the Buscom systemThe KNX system is fully addressable and can be commissioned to control any output or group of outputs throughout the entire KNX networkFuture layout changes can be accommodated easily as all components are plug and play and can be re-commissioned through KNX ETS software

Pack Cat. Nos. Lightrak – KNX sensors

Ceiling mounted sensors

1 FFC060 Compact PIR detector KNX – flush mounting

1 FFC061 Microwave detector KNX – low profile

1 0489 61 Microwave detector KNX – adjustable head

1 0489 60 High bay PIR detector KNX

Handsets for use with sensors (above)

1 UHS5 Commissioning handset

1 UHS7 User handset

Combined PIR and ultrasound detectors

1 0489 18 Ceiling mounting dual tech sensor KNX

1 0489 20 Wall mounting dual tech sensor KNX

Handsets for use with combined PIR and ultrasound detectors (above)

1 0882 30 Commissioning handset

Mounting accessories for use with sensors

1 MWS3A-DBB Surface mounting back box for Cat. No. 0489 61

1 DBB Surface mounting back box for Cat. Nos. FFC060 and FFC061

1 0488 75 Surface mounting back box for Cat. No. 0489 18

1 0489 71 Corner accessory for Cat. No. 0489 20

Lightrak – Sub-cabling for use with KNX devices

1 FFG300 5 m tap-off – KNX only

1 FFG305 10 m tap-off – KNX only


Commissioning

handset

0882 30

Compact PIR

detector KNX -

flush mounting

FFC060

Microwave

detector KNX -

adjustable head

0489 61

Microwave

detector KNX -

low profile

FFC061

Ceiling mounting

dual tech sensor

0489 18

Wall mounting

dual tech sensor

0489 20

Commissioning

handset for FFC

sensors

UHS5

16

Lightrak® KNX / DALI lighting control systemtechnical information

KNX technical specification

Each line coupler can support 64 KNX bus devicesA maximum of 15 line couplers may be linked with a main bus line together to form an area; therefore an area can support up to 960 devicesThe system may be further expanded with the addition of a backbone bus line which would allow the linking together of 15 main bus lines via 15 line couplers, therefore any single system could support 14 400 devicesBy utilising additional line couplers this total can exceed 64 000 devices (for additional information, please contact us on +44 (0) 370 608 9020)

Within any KNX bus line the following cable lengths are permitted :• Power supply unit to bus device 350 m maximum• Bus device to bus device 700 m maximum• Total bus line length 1 000 m maximum• Minimum distance between 2 power supply units on one line is 200 m • A Buscom trunking mounted power supply unit can be used for this application, Cat. No. FFA022

KNX power supply - 640 mA found within :

• Cat. No. FFA020 – Line power supply • Cat. No. FFA021 – Powered line coupler • Cat. No. FFA022 – Buscom mounted power supply unit • Cat. No. FFA024 – KNX/IP gateway with router

KNX power supply produces and monitors KNX system voltage The bus line is decoupled from the power supply with the integrated choke

Cat. No. FFA021 - Powered line coupler, wall mounted

Device links the data on two different bus/KNX lines and isolates bus lines from one another to allow independent local operation on a bus lineLine coupler can be used as a : • Line coupler • Zone coupler • Or a repeater on either existing bus networks or new bus/KNX networks

KNX/bus power supply

• Primary line 29 V• Secondary line 29 V

KNX/bus absorption

• From the primary line 6 mA • From the secondary line 8 mA

Electrical safety

• Degree of pollution (in accordance with CEI 60664-1) : 2 • Protection type (in accordance with EN 60529) : IP 20 • Protection class (in accordance to IEC 61140): III • Overvoltage class (in accordance to IEC 60664-1): III • Bus : safety extra-low voltage SELV DC 24 V • Device complies with EN 50090-2-2 and EN 60669-2 EMC requirements comply with EN 61000-6-1, EN 61000-6-3 and EN 50090-2-2

Marking

• KNX, CE

All dimensions (mm) are nominal

Electrical features

Power supply Input voltage: 110-250V~, 50-60Hz

Power loss < 6 W

Efficiency 75%

Output KNX output (DPSU): 1 line with

integrated choke

KNX nominal voltage 29 V DC +2/-1 V, SELV

Auxiliary voltage output 1 (without choke)

Auxiliary voltage 29 V DC +2/0 V, SELV

KNX nominal current (Total of KNX and auxiliary

voltage output)

640 mA, short-circuit proof

Sustained short-circuit current < 1.3 A

Mains failure back-up time > 200 ms

17

Cat. No. FFA025 - USB/KNX interface

Device is used to connect a PC to the KNX/bus in order to address, configure, display, connect and perform diagnostics on bus devices via the USB portIt allows access to products on the bus in accordance with KNX protocol

Technical features

• Supply voltage via USB connected to PC• USB connection USB type B (maximum length 5 m, cable not supplied)• Transmission speed 9 600 bps between the interface and the bus12 Mbps between the USB 1.1 interface and the PC

Standards

• Directive : CE• Installation standards : NFC 15-100• Product standards : IEC 60669-2-1• Environmental standards : - EU Directive 2002/96/EC : WEEE (Waste Electrical and Electronic Equipment) - EU Directive 2002/95/EC : RoHS (Restriction of Hazardous Substances) - Decrees and/or regulations : ERP (public buildings), ERT (workplace buildings), IGH (high-rise buildings)

Enclosure dimensions

Enclosure technical details

• Self-extinguishing : resistance to incandescent wire 650°C• Conforms to EN 60439-3• Weatherproof enclosures – IP 65 - IK 09 - Class II• Door and enclosure fully reversible• Lockable door handle, sealable cover and faceplate• Shock-resistant polystyrene material• Box colour light grey L750A, cover colour dark grey R746A

Lightrak® KNX / DALI lighting control systemtechnical information (continued)


A

48.5

78

C D

B

E

Cat. Nos. Dimensions

A B C D E

FFA020 115·6 164 200 120 70

FFA021 115·6 200 200 120 106

FFA022(1) 115·6 164 200 120 70

FFA024 115·6 200 200 120 106

FFA025 109 93 174 94 -

(1) Dimensions for tap-off and brackets are not included

Cat. No. FFA024 - KNX/IP gateway with router

The KNX/IP router is used to connect several KNX lines via computernetworks using IP (Internet Protocol). Device also offers the benefitof simultaneous access to the bus line from a PC, tablet or smartphone

Equipped with an RJ 45 socket so it can be connected to the computernetwork, and a KNX connector for connection to the KNX bus, thisrouter can be accessed locally via the LAN or remotely

Climatic features

• Environmental operating temperature : -5 to + 45°C• Storage temperature : -25 to + 70°C• Relative humidity (non-condensing) : 5% to 93%• Weight : 105 g

Electrical features

• KNX/bus power supply : 29 V =• Auxiliary power supply: - PoE (Power over Ethernet) 48 V= (in accordance with standard IEEE 802.3af ) max. 0.8 W - external power supply 24 V~/= (12 - 24 V~, 12 - 30 V=) max. 1.7 W (57 mA in 24 V=)

Caution : we recommend using an external safety extra low voltagefor the IP router only

Electricity consumption

• 10 mA KNX/BUS absorption• Auxiliary power supply : max. 1·7 W (57 mA in 24 V=)

Network communication

• Ethernet : 10BaseT (10 Mbps)• Internet protocols supported : ARP, ICMP, IGMP, UDP/IP, DHCP, AutoIP• KNXnet/IP depending on the characteristics of the KNX system : core,routing, device management

Standards and approvals

Electrical safety

• Degree of pollution (in accordance with standard IEC 60664-1) : 2• Protection (in accordance with standard EN 60529) : IP 20• Protection class (in accordance with standard IEC 61140) : III• Overvoltage class (in accordance with standard IEC 60664-1) : III• Bus : safety extra low voltage (SELV) 24 VDC• The device complies with standard EN 50 090-2-2

Electromagnetic compatibility

Compliance with standards EN 61000-6-2, EN 61000-6-3 and EN 50090-2-2

Marking

KNX, EIB, CE

Electromagnetic compatibility

Compliance with EMC regulations (residential and commercial buildings) and low voltage regulations

18



Cat. No. FFD062 DALI/KNX Lighting Control Module

Cat. No. FFD062 is a lighting control module (LCM) designed for

controlling 32 addressable DALI control gear for lighting which might

include up to 8 emergency controllers

The LCM has 9 male GST style connections for the mains, DALI and

KNX bus. This unit is designed to be used in conjunction with Legrand’s

lighting power and control busbar systems

System wiring example

• Traditional LCM solution • Cat. No. FFDDDB1 distribution box + Cat. No. FFD062 controller

• Distribution box, snap-fits onto the busbar trunking, and plugs in via a

tap-off

• KNX/DALI controller plugs into the end of the distribution box forming

a traditional LCM

• Power comes from the busbar trunking (L, N + E busbars)

• KNX connection is via the comms bus within the busbar trunking

• LCM becomes an individual DALI domain, networked on the wider

KNX bus

• DALI luminaires plug into the LCM to connect to power and DALI

- Distribution box has 8 outlets, 6-pole GST connectors

(L, N, E, D+, D-) black/blue

• KNX sensors and other devices plug into the busbar trunking for

connection to the KNX bus

Cat. No. FFD062 DALI/KNX Lighting Control Module (continued)

System wiring example

• Intelligent busbar solution

• Cat. No. FFDBCU starter unit + Cat. No. FFD062 controller

• Starter unit, snap-fits onto the busbar trunking, and plugs in via a

tap-off

• KNX/DALI controller plugs into the end of the starter unit

• Power comes from the busbar trunking (L, N + E busbars)

• KNX connection is via the comms bus within the busbar trunking

• KNX/DALI controller injects DALI onto a dedicated pair of busbars

within the trunking, turning the busbar run into an individual DALI

domain (Intelligent busbar solution)

DALI luminaires plug into the intelligent busbar via a tap-off for power

and DALI connection

- Tap-off outlets will typically be available at 500 mm intervals

along the entire busbar run

• KNX sensors and other devices plug into the busbar trunking for

connection to the KNX bus

DALI lighting and emergency control gear combinations

The total number of DALI control gear that the LCM is designed to

control is 32. Up to 8 of these can be emergency control gear

The following combinations are given as an example :

• 32 lighting control gear and 0 emergency control gear



• ***


Comms bus

Live

Neutral

Busbar configuration

Comms bus

DALI

DALI

Live

Neutral

Busbar configuration

Neutral

Live

Neutral

Cat. No. FFDDDB1

Cat. No. FFD062Cat. No. FFD062

Cat. No. FFDBCU

19




System wiring example (continued)

Technical data

• Weight 0·40 kg

• Supply voltage 220 - 240V AC

• Frequency 50 Hz

• Rated impulse voltage 4 000 V

• KNX voltage 30 V DC via KNX bus

• DALI voltage 16 V DC via DALI

• DALI output current 250 mA (maximum)

• Temperature -10ºC to 35ºC

• Humidity 5 to 95% non-condensing

• Material (casing) flame retardant ABS and PC/ABS

• Classifications

- Insulation : Class II

- Purpose : operating control

- Type : 1.B

- Software class : Class A

- Pollution : Degree 2

• Compliance EMC-2014/30/EU

LVD-2014/35/EU

Dimensions

Dimensions of distribution boxes Cat. Nos. FFDDDB, FFDDDB1 and

FFDDDB2

Allow 150 mm for total height of unit (including cables)

Dimension of tap-offs and brackets not included

Material (casing) flame retardant ABS and PC/ABS


System wiring example (continued)

Dimensions

Dimensions of Buscom Control Unit Cat. No. FFDBCU

Dimension of tap-offs and brackets not included

Material (casing) flame retardant ABS and PC/ABS

55

95

396

350

200

127

146

159

105

127

145

20

■ PIR presence detectors KNX Cat. No. FFC060

Cat. No. FFC060 is a compact PIR detector suitable to be mounted

either flush or in a surface mounting box

Key Product Features :

• Two ELV switch inputs to manually override the dimming levels and / or

override the lights on or off

• KNX programming mode accessible with IR handset and also by

using the push switch on the back of the unit

• Programmable logic block. This allows conditions to be set.

For example : send the occupancy telegram only if the switch is

pressed and the lux is low

• All functionality is fully programmable using the KNX ETS

commissioning software

Technical Data :

• Control method KNX

• IP rating 40

• Weight 0.15 kg

• Supply voltage DC 30 V DC over KNX bus

• Terminal capacity KNX : 1.2 mm² over KNX connector

Switch input : 2.5 mm²

• Working temperature range °C -10 to 35

• Humidity 5 to 95% non-condensing

• Material (casing) flame retardant ABS and PC/ABS

• Insulation class Class II

• Compliance EMC-2014/30/EU, LVD-2014/35/EU

Detection pattern

Dimensions (mm)

7 m

2.8

m

76 654

HIGH < SENSITIVITY > LOW


21

KNX system topology schematic diagram

Example of typical layout

1.15.0 (maximum)

1.5.64

Repeaterpower linecoupler

1.5.128 1.5.192(maximum)

KNX standardbus cable

Bus lin

e(m

ax. 64 L

CU

)

KNX standard bus cable interconnectingmain line powered line coupler

AREA 2 main bus line



AREA 15 main bus line (maximum)

1.5.01.4.01.3.01.2.01.1 .0


Bus lin

e(m

ax. 64 L

CU

)

Backbonepoweredline coupler

1.0. –1.0.1 1.0.2 1.0.3 1.0.4 1.0.15

Backbone bus line

KNX standard bus cableinterconnecting backbonepowered line coupler

Main linepoweredline coupler

Backbonepower supply unit

Lightrak® KNX / DALI lighting control systemtypical layout and system topology


22

Electrak® Intelligent lighting busbar systempower, DALI and KNX distribution system

The intelligent lighting busbar system brings together a plug-and-play distribution solution for power, DALI and KNX This innovative new concept delivers a solution where all control and lighting devices plug directly into the tap-off outlets, resulting in a neat professional installation with shortened final cable runs to luminaires With tap-off outlets located every 500 mm along the busbar, it enables the most rapid installation and reconfiguration potential Should extra outlets be required a DALI distribution box can be plugged in, to turn one outlet into 8 additional outlets

Key : How to select the correct components All examples on this page show IP 4X products IP rating is dictated by the red letters

4 = IP 4X. For IP 54 version, replace 4 with 5

BDA14LFC

BDA14RFC

(1) Weights shown are for IP 4X rated products. For all other

weights, contact us on +44 (0) 845 600 6266

Pack Cat. Nos. Flexible lengths for single sided system

Flexible lengths can be used to change direction, change level or overcome obstructions

Suspended – right to left Length Rating Weight (m) (A) (kg)(1)

1 BDA140XC 0·5 25 3·17 1 BDA142XC 2 25 3·59 1 CDA140XC 0·5 40 3·22 1 CDA142XC 2 40 3·79

DALI break interlink to split DALI domains

For use to continue power and KNX, but split a run into 2 separate DALI domains


1 BBA140XC 0·5 25 2·91 1 CCA140XC 0·5 40 2·94

Pack Cat. Nos. Single sided – Intelligent busbar system

L, N, D+, D- + KNX bus. IP 4X Tap-off outlets are located at 500 mm intervals and colour coded blue to indicate DALI system on just 1 side of the bar

L, N, D+, D- + KNX bus. trunking lengths

Length Tap-off Weight 25 A (m) outlets (kg)(1)

1 BDA2145C 2 4 3·47 1 BDA3145C 3 6 4·77 40 A 1 CDA2145C 2 4 3·61 1 CDA3145C 3 6 4·97

Feed units for single sided system

Feed units come with 2 x 25 mm Ø and 2 x 16 mm Ø cable entry holes and single screw cable terminals for power and data Left feed units are supplied with right end stop Right feed units are supplied with left end stop

Suspended Weight (kg)(1)

1 BDA14LFC 25 A left 1·29 1 BDA14RFC 25 A right 1·52 1 CDA14LFC 40 A left 1·38 1 CDA14RFC 40 A right 1·61


BDA14LFCBDA3145C

FFDBCU (p. 14)DDD435 (p. 23)

FFD062 (p. 14)

23

Electrak® Intelligent lighting busbar systempower, DALI and KNX distribution system

Pack Cat. Nos. Double sided – Intelligent busbar system

L, N, D+, D- + KNX bus. on the front side and L, N on the back. IP 4X Tap-off outlets are located at 500 mm intervals Outlets on the front / lighting side of the bar are colour coded blue to indicate DALI system Outlets on the back / mechanical side of the bar are colour coded white for power only

L, N, D+, D- + KNX bus. trunking lengths Double sided power only on the rear side


1 BDA2245C 2 7 3·72 1 BDA3245C 3 11 5·16 40 A 1 CDA2245C 2 7 4·45 1 CDA3245C 3 11 5·46

Feed units for double sided system

Double sided feed units come with 2 x 25 mm Ø cable entry holes for each side of the bar, plus a further 2 x 16 mm Ø. holes for the comms side of the bar

Single screw cable terminals are provided for power and data. Supplied with end stops

Suspended Weight(kg)(1)

1 BDA24LFC 25 A left 1·35 1 BDA24RFC 25 A right 1·61 1 CDA24LFC 40 A left 1·49 1 CDA24RFC 40 A right 1·71

Flexible lengths for double sided system



1 BBD240XC 0·5 25 3·16 1 BBD242XC 2 25 4·14 1 CCD240XC 0·5 40 3·63 1 CCD242XC 2 40 4·86

The intelligent lighting busbar system brings together a plug-and-play distribution solution for power, DALI and KNX The double-sided version introduces a second electrical circuit that can be dedicated, for example, for mechanical power. This innovative new concept delivers a solution where all control and lighting devices plug directly into the tap-off outlets, resulting in a neat professional installation with shortened final cable runs to luminaires With tap-off outlets located every 500 mm along the busbar, it enables the most rapid installation and reconfiguration potential Should extra outlets be required a DALI distribution box can be plugged in, to turn one outlet into 8 additional outlets

Pack Cat. Nos. DALI break interklink to split domains

For use to continue power and KNX, but split a run into 2 separate DALI domains


1 BBA240XC 0·5 25 3·14 1 CCA240XC 0·5 40 3·25

DALI tap-off units

16 A unfused tap-offs 2P + E + DALI blue 5 core 1·5 mm2 flex – IP 4X

Length (m)

1 DDD435 3 1 DDD455 5 1 DDD485 8

5 A fused tap-offs 2P + E + DALI blue 5 core 1·5 mm2 flex – IP 4X

Length (m)

1 DDD435F 3 1 DDD455F 5 1 DDD485F 8

16 A unfused tap-offs to 6P GST female connector 2P + E + DALI blue 5 core 1·5 mm2 flex – IP 4X

Length (m)

1 DDD435G 3 1 DDD455G 5 1 DDD485G 8

5 A fused tap-offs to 6P GST female connector 2P + E + DALI blue 5 core 1·5 mm2 flex – IP 4X

Length (m)

1 DDD435FG 3 1 DDD455FG 5 1 DDD485FG 8

DALI only tap-offs, blue 2 core 1·5 mm2 flex – IP 4X

Length (m)

1 DDD432 3 1 DDD452 5 1 DDD482 8

CCA240XC

(1) Weights shown are for IP 4X rated buscom. For all other


Key : How to select the correct components All examples on this page show IP 4X products IP rating and tap-off type is dictated by the red letters



CDA3245C

CDA2245C

24

Electrak® Buscom trunking2P, 3P, dual circuit and 3 phase systems

3 m track 0·5 m spacings




Single sided BBA3145C BBA2145C BBA3141C BBA2141C

Double sided BBA3245C BBA2245C BBA3241C BBA2241C

Single sided CCA3145C CCA2145C CCA3141C CCA2141C

Double sided CCA3245C CCA2245C CCA3241C CCA2241C

Single sided BBA3155C BBA2155C BBA3151C BBA2151C

Double sided BBA3255C BBA2255C BBA3251C BBA2251C

Single sided CCA3155C CCA2155C CCA3151C CCA2151C

Double sided CCA3255C CCA2255C CCA3251C CCA2251C

Single sided BBB3145C BBB2145C BBB3141C BBB2141C

Double sided BBB3245C BBB2245C BBB3241C BBB2241C

Single sided CCB3145C CCB2145C CCB3141C CCB2141C

Double sided CCB3245C CCB2245C CCB3241C CCB2241C

Single sided BBB3155C BBB2155C BBB3151C BBB2151C

Double sided BBB3255C BBB2255C BBB3251C BBB2251C

Single sided CCB3155C CCB2155C CCB3151C CCB2151C

Double sided CCB3255C CCB2255C CCB3251C CCB2251C

Single sided BBC3145C BBC2145C BBC3141C BBC2141C

Double sided BBC3245C BBC2245C BBC3241C BBC2241C

Single sided CCC3145C CCC2145C CCC3141C CCC2141C

Double sided CCC3245C CCC2245C CCC3241C CCC2241C

Single sided BBC3155C BBC2155C BBC3151C BBC2151C

Double sided BBC3255C BBC2255C BBC3251C BBC2251C

Single sided CCC3155C CCC2155C CCC3151C CCC2151C

Double sided CCC3255C CCC2255C CCC3251C CCC2251C

Single sided BBD3145C BBD2145C BBD3141C BBD2141C

Double sided BBD3245C BBD2245C BBD3241C BBD2241C

Single sided CCD3145C CCD2145C CCD3141C CCD2141C

Double sided CCD3245C CCD2245C CCD3241C CCD2241C

Single sided BBD3155C BBD2155C BBD3151C BBD2151C

Double sided BBD3255C BBD2255C BBD3251C BBD2251C

Single sided CCD3155C CCD2155C CCD3151C CCD2151C

Double sided CCD3255C CCD2255C CCD3251C CCD2251C

Electrak 302P + E system

SYSTEM IP RATING RATING

25 A

40 A

25 A

40 A

25 A

40 A

25 A

40 A

IP 54

IP 4X

IP 54

Electrak 313P + E system

OUTLETS

IP 4X

25 A

40 A

25 A

40 A

25 A

40 A

25 A

40 A

Electrak 32Dual circuit system

Electrak 333 phase system

IP 54

IP 4X

IP 54

IP 4X

25

Centre feedSuspended feed

unit left handSuspended feed unit right hand

Surface feed unit left hand

Surface feed unit right hand

Suspended flexible corner

0·5 m

Suspended flexible corner

2·0 m

Surface flexible corner 0·5 m

Surface flexible corner 2·0 m

BBA44FC BBA14LFC BBA14RFC BBA34LFC BBA34RFC BBA140XC BBA142XC BBA340XC BBA342XC

– BBA24LFC BBA24RFC – – BBA240XC BBA242XC – –

CCA44FC CCA14LFC CCA14RFC CCA34LFC CCA34RFC CCA140XC CCA142XC CCA340XC CCA342XC

– CCA24LFC CCA24RFC – – CCA240XC CCA242XC – –

– BBA15LFC BBA15RFC BBA35LFC BBA35RFC BBA150XC BBA152XC BBA350XC BBA352XC

– BBA25LFC BBA25RFC – – BBA250XC BBA252XC – –

– CCA15LFC CCA15RFC CCA35LFC CCA35RFC CCA150XC CCA152XC CCA350XC CCA352XC

– CCA25LFC CCA25RFC – – CCA250XC CCA252XC – –

BBB44FC BBB14LFC BBB14RFC BBB34LFC BBB34RFC BBB140XC BBB142XC BBB340XC BBB342XC

– BBB24LFC BBB24RFC – – BBB240XC BBB242XC – –

CCB44FC CCB14LFC CCB14RFC CCB34LFC CCB34RFC CCB140XC CCB142XC CCB340XC CCB342XC

– CCB24LFC CCB24RFC – – CCB240XC CCB242XC – –

– BBB15LFC BBB15RFC BBB35LFC BBB35RFC BBB150XC BBB152XC BBB350XC BBB352XC

– BBB25LFC BBB25RFC – – BBB250XC BBB252XC – –

– CCB15LFC CCB15RFC CCB35LFC CCB35RFC CCB150XC CCB152XC CCB350XC CCB352XC

– CCB25LFC CCB25RFC – – CCB250XC CCB252XC – –

BBC44FC BBC14LFC BBC14RFC BBC34LFC BBC34RFC BBC140XC BBC142XC BBC340XC BBC342XC

– BBC24LFC BBC24RFC – – BBC240XC BBC242XC – –

CCC44FC CCC14LFC CCC14RFC CCC34LFC CCC34RFC CCC140XC CCC142XC CCC340XC CCC342XC

– CCC24LFC CCC24RFC – – CCC240XC CCC242XC – –

– BBC15LFC BBC15RFC BBC35LFC BBC35RFC BBC150XC BBC152XC BBC350XC BBC352XC

– BBC25LFC BBC25RFC – – BBC250XC BBC252XC – –

– CCC15LFC CCC15RFC CCC35LFC CCC35RFC CCC150XC CCC152XC CCC350XC CCC352XC

– CCC25LFC CCC25RFC – – CCC250XC CCC252XC – –

BBD44FC BBD14LFC BBD14RFC BBD34LFC BBD34RFC BBD140XC BBD142XC BBD340XC BBD342XC

– BBD24LFC BBD24RFC – – BBD240XC BBD242XC – –

CCD44FC CCD14LFC CCD14RFC CCD34LFC CCD34RFC CCD140XC CCD142XC CCD340XC CCD342XC

– CCD24LFC CCD24RFC – – CCD240XC CCD242XC – –

– BBD15LFC BBD15RFC BBD35LFC BBD35RFC BBD150XC BBD152XC BBD350XC BBD352XC

– BBD25LFC BBD25RFC – – BBD250XC BBD252XC – –

– CCD15LFC CCD15RFC CCD35LFC CCD35RFC CCD150XC CCD152XC CCD350XC CCD352XC

– CCD25LFC CCD25RFC – – CCD250XC CCD252XC – –

26

Ele

ctr

ak

30

2P

+ E

sy

ste

mS

YS

TE

M

PH

AS

E

IP R

AT

ING

L+

N

IP 54

IP 4X

Ele

ctr

ak

31

3P

+ E

sy

ste

m

Ele

ctr

ak

32

Du

al

cir

cu

it s

ys

tem

L1

NL

1 L

2 N

IP 54

IP 4X

IP 54

IP 4X

L1

N1

L2

N2

IP 54

IP 4X

IP 54

IP 4X

L1

NL

2 N

IP 54

IP 4X

IP 54

IP 4X

L3

NP

ha

se

s

ele

cta

ble

IP 54

IP 4X

IP 54

IP 4X

L +

L +

L +

N

IP 54

IP 4X

Electrak® Buscom trunking tap-offs

Rewirable 0·8 m 2 m 3 m 5 m

With comms – DDE408FC DDE42FC DDE43FC DDE45FC

No comms DDF4F DDE408F DDE42F DDE43F DDE45F







With comms – DDG408FC DDG42FC DDG43FC DDG45FC

No comms DDH4F DDG408F DDG42F DDG43F DDG45F

With comms – DDG508FC DDG52FC DDG53FC DDG55FC

No comms DDH5F DDG508F DDG52F DDG53F DDG55F





With comms – DDJ408FC DDJ42FC DDJ43FC DDJ45FC

No comms DDK4F DDJ408F DDJ42F DDJ43F DDJ45F

With comms – DDJ508FC DDJ52FC DDJ53FC DDJ55FC

No comms DDK5F DDJ508F DDJ52F DDJ53F DDJ55F

With comms – DDM408L1FC DDM42L1FC DDM43L1FC DDM45L1FC

No comms DDN4L1F DDM408L1F DDM42L1F DDM43L1F DDM45L1F











With comms – – – – –

No comms DDP4SF – – – –


No comms DDP5SF – – – –


No comms – – – – –


No comms – – – – –

13 A FUSED TAP-OFFS

Ele

ctr

ak

33

3 p

ha

se

sy

ste

m

27

– DDE408C DDE42C DDE43C DDE45C

DDF4 DDE408 DDE42 DDE43 DDE45







– DDG408C DDG42C DDG43C DDG45C

DDH4 DDG408 DDG42 DDG43 DDG45

– DDG508C DDG52C DDG53C DDG55C

DDH5 DDG508 DDG52 DDG53 DDG55





– DDJ408C DDJ42C DDJ43C DDJ45C

DDK4 DDJ408 DDJ42 DDJ43 DDJ45

– DDJ508C DDJ52C DDJ53C DDJ55C

DDK5 DDJ508 DDJ52 DDJ53 DDJ55

– DDM408L1C DDM42L1C DDM43L1C DDM45L1C

DDN4L1 DDM408L1 DDM42L1 DDM43L1 DDM45L1











– – – – –

DDP4S – – – –

– – – – –

DDP5S – – – –

– – – – –

– DDR408 DDR42 DDR43 DDR45

– – – – –

– DDR508 DDR52 DDR53 DDR55

Rewirable 0·8 m 2 m 3 m 5 m

16 A UNFUSED TAP-OFFS

28

Electrak® 30 2P + E Buscom trunkingpower and communication distribution




1 BBA140XC 0·5 25 2·91 1 BBA142XC 2 25 3·21 1 CCA140XC 0·5 40 2·94 1 CCA142XC 2 40 3·33

Surface mounted – right to left Length Rating Weight (m) (A) (kg)(1)


Pack Cat. Nos. Electrak 30 2 P + E + comms – single sided system

2P + E Buscom trunking system with integral communications bus circuit available in IP 4X and IP 54 versions Socket outlets are colour coded white and are located on just one side of the bar

2P + E trunking lengths

Trunking lengths push fit into each other, and feed units or flexible lengths. Trunking lengths can be surface mounted or suspended using the various bracket options


1 BBA3145C 3 6 4·47 1 BBA2145C 2 4 3·27 1 BBA3141C 3 3 4·42 1 BBA2141C 2 2 3·24 40 A 1 CCA3145C 3 6 4·57 1 CCA2145C 2 4 3·36 1 CCA3141C 3 3 4·52 1 CCA2141C 2 2 3·31


Feed units come with 2 x 25 mm Ø and 2 x 16 mm Ø cable entry holes and single screw cable terminals for power and data Left feed units are supplied with right end stop Right feed units are supplied with left end stop Centre feed units are supplied with right and left end stops


1 BBA14LFC 25 A left 1·22 1 BBA14RFC 25 A right 1·49 1 CCA14LFC 40 A left 1·27 1 CCA14RFC 40 A right 1·49

Surface mounted Weight (kg)(1)


Centre feed Weight (kg)(1)

1 BBA44FC 25 A 1·8 1 CCA44FC 40 A 1·8

Integral communication bus suitable for KNX, Lonworks, DALI protocols, etc. 25 A and 40 A systems Outlets on one or two sides. IP 4X or IP 54 ingress protection Fast installation (trunking push fits together in seconds). High quality materials. Suspended or surface mounted

L

N

PE

C

Key : How to select the correct components All examples on this page show IP 4X Buscom trunking IP rating is dictated by the red letters


CCA14LFC

CCA14RFCCCA142XC

CCA3145C

CCA2145C

(1) Weights shown are for IP 4X rated Buscom. For all other


Selection chart p. 24-27 Dimensions and technical information p. 38-43

29


Pack Cat. Nos. Electrak 30 2 P + E + comms – double sided system

2P + E Buscom trunking system with integral communications bus circuit available in IP 4X and IP 54 versions Socket outlets are colour coded white and are located on both sides of the bar The comms circuit is only available on one side of the bar as shown in the diagram below


Trunking lengths push fit into each other, and feed units or flexible lengths. Double sided trunking must be fixed using suspended fixing brackets


1 BBA3245C 3 11 4·85 1 BBA2245C 2 7 3·52 1 BBA3241C 3 6 4·70 1 BBA2241C 2 4 3·47 40 A 1 CCA3245C 3 11 5·05 1 CCA2245C 2 7 3·65 1 CCA3241C 3 6 4·96 1 CCA2241C 2 4 3·61


Double sided feed units come with 2 x 25 mm Ø cable entry holes for each side of the bar, plus a further 2 x 16 mm Ø. holes for the comms side of the bar

Single screw cable terminals are provided for power and data. Supplied with end stops

Suspended Weight(kg)(1)







LN

PE

PE

NL

C

Pack Cat. Nos. Tap-off units with and without comms

Power only tap-offs can plug into any tap-off outlet Tap-offs with comms can only be plugged into the comms side of the bar

16 A unfused tap-off units

Pre-wired tap-off units to pick-up L1+N, colour coded white

Length Fixed Weight (m) polarity (kg)(1)

1 DDE408C 0·8 0·2 1 DDE42C 2 0·4 1 DDE43C 3

L + N 0·5

1 DDE45C 5 0·7

13 A fused tap-off units

Pre-wired tap-off units to pick-up L1+N, supplied with BS 1362 fuse, colour coded white


1 DDE408FC 0·8 0·2 1 DDE42FC 2 0·4 1 DDE43FC 3

L + N 0·5

1 DDE45FC 5 0·7

Tap-off units without comms – rewirable

16 A unfused tap-off unit

Rewirable tap-off unit to pick-up L1+N, colour coded white, can plug into any tap-off outlet

Fixed Weight polarity (kg)(1)

1 DDF4 L + N 0·14

13 A fused tap-off unit

Rewirable tap-off unit to pick-up L1+N, supplied with BS 1362 fuse, colour coded white, can plug into any tap-off outlet


1 DDF4F L + N 0·14

DDF4F

CCA3245C

CCA2245C



Key : How to select the correct components All examples on this page show IP 4X Buscom trunking IP rating and tap-off type is dictated by the red letters

4 = IP 4X. For IP 54 version, replace 4 with 5C = Tap-off with communications circuit

For power only, remove the C

DDE45CDDE45


30




Suspended – right to left

Length Rating Weight (m) (A) (kg)(1)

1 BBB140XC 0·5 25 3·04 1 BBB142XC 2 25 3·40 1 CCB140XC 0·5 40 3·08 1 CCB142XC 2 40 3·56

Surface mounted – right to left



Pack Cat. Nos. Electrak 31 3P + E – single sided system

3P + E Buscom trunking system with integral communications bus circuit available in IP 4X and IP 54 versions Socket outlets are colour coded white and are located on just one side of the bar




1 BBB3145C 3 6 4·62 1 BBB2145C 2 4 3·37 1 BBB3141C 3 3 4·58 1 BBB2141C 2 2 3·34 40 A 1 CCB3145C 3 6 4·77 1 CCB2145C 2 4 3·47 1 CCB3141C 3 3 4·73 1 CCB2141C 2 2 3·44




1 BBB14LFC 25 A left 1·25 1 BBB14RFC 25 A right 1·48 1 CCB14LFC 40 A left 1·33 1 CCB14RFC 40 A right 1·55




1 BBB44FC 25 A 1·8 1 CCB44FC 40 A 1·8

Integral communication bus suitable for KNX, Lonworks, DALI, protocols etc. 25 A and 40 A systems Outlets on one or two sides. IP 4X or IP 54 ingress protection Fast installation (trunking push fits together in seconds). High quality materials. Suspended or surface mounted

L 2

L1

N

PE

C

CCB14LFC

CCB14RFCCCB142XC

CCB3145C

CCB2145C






31


Pack Cat. Nos. Electrak 31 3P + E – double sided system

3P + E Buscom trunking system with integral communications bus circuit available in IP 4X and IP 54 versions Socket outlets are colour coded white and are located on both sides of the bar The comms circuit is only available on one side of the bar as shown in the diagram below




1 BBB3245C 3 11 5·15 1 BBB2245C 2 7 3·72 1 BBB3241C 3 6 5·06 1 BBB2241C 2 4 3·68 40 A 1 CCB3245C 3 11 5·45 1 CCB2245C 2 7 3·92 1 CCB3241C 3 6 5·36 1 CCB2241C 2 4 3·88


Double sided feed units come with 2 x 25 mm Ø cable entry holes for each side of the bar, plus a further 2 x 16 mm Ø. holes for the comms side of the bar. Single screw cable terminals are provided for power and data











Pre-wired tap-off units to pick up L1, L2+N, colour coded white


1 DDE408C 0·8 0·2 1 DDE42C 2 0·4 1 DDE43C 3

L + N 0·5

1 DDE45C 5 0·7

1 DDG408C 0·8 0·2 1 DDG42C 2 0·4 1 DDG43C 3

L1 + L2 + N 0·5

1 DDG45C 5 0·7


Pre-wired tap-off units to pick-up L1, L2+N, supplied with BS 1362 fuse, colour coded white



L + N 0·5

1 DDE45FC 5 0·7

1 DDG408FC 0·8 0·2 1 DDG42FC 2 0·4 1 DDG43FC 3

L1 + L2 + N 0·5

1 DDG45FC 5 0·7



Rewirable tap-off units colour coded white, can plug into any tap-off outlet


1 DDF4 L + N 0·14 1 DDH4 L1 L2 N1 0·14


Rewirable tap-off units supplied with BS 1362 fuse, colour coded white, can plug into any tap-off outlet


1 DDF4F L + N 0·14 1 DDH4F L1 L2 N1 0·14

L2

L1

N

PE

PE

N

L1

L2

C

DDH4F

CCB3245C

CCB2245C




4 = IP 4X. For IP 54 version, replace 4 with 5C = Tap-off with communications circuit. For power only, remove the C

DDE45DDE45C


32

Electrak® 32 4P + E (dual circuit) Buscom trunkingpower and communication distribution





1 BBC140XC 0·5 25 3·17 1 BBC142XC 2 25 3·59 1 CCC140XC 0·5 40 3·22 1 CCC142XC 2 40 3·79




Pack Cat. Nos. Electrak 32 4P + E (dual circuit) – single sided system

Dual circuit Buscom trunking system with integral communications bus circuit available in IP 4X and IP 54 versions Socket outlets are colour coded white and are located on just one side of the bar

4 P + E trunking lengths



1 BBC3145C 3 6 4·77 1 BBC2145C 2 4 3·47 1 BBC3141C 3 3 4·73 1 BBC2141C 2 2 3·44 40 A 1 CCC3145C 3 6 4·97 1 CCC2145C 2 4 3·61 1 CCC3141C 3 3 4·93 1 CCC2141C 2 2 3·58




1 BBC14LFC 25 A left 1·29 1 BBC14RFC 25 A right 1·52 1 CCC14LFC 40 A left 1·38 1 CCC14RFC 40 A right 1·61




1 BBC44FC 25 A 1·8 1 CCC44FC 40 A 1·8


CL2

N2

L1

N1

PE

CCC14LFC

CCC14RFCCCC142XC

CCC3145C

CCC2145C






33

Electrak® 32 4P + E (dual circuit) Buscom trunkingpower and communication distribution

Pack Cat. Nos. Electrak 32 4P + E (dual circuit) – double sided system

Dual circuit Buscom trunking system with integral communications bus circuit available in IP 4X and IP 54 versions Socket outlets are colour coded white and are located on both sides of the bar The comms circuit is only available on one side of the bar as shown in the diagram below




1 BBC3245C 3 11 5·46 1 BBC2245C 2 7 3·92 1 BBC3241C 3 6 5·37 1 BBC2241C 2 4 3·88 40 A 1 CCC3245C 3 11 5·86 1 CCC2245C 2 7 4·70 1 CCC3241C 3 6 5·77 1 CCC2241C 2 4 4·15


Double sided feed units come with 2 x 25 mm Ø cable entry holes for each side of the bar, plus a further 2 x 16 mm Ø. holes for the comms side of the bar. Single screw cable terminals are provided for power and data Supplied with end stops











Pre-wired tap-off units to pick up L1+N1 or L2+N2, colour coded white


1 DDE408C 0·8 0·2 1 DDE42C 2 0·4 1 DDE43C 3

L1 + N1 0·5

1 DDE45C 5 0·6

1 DDJ408C 0·8 0·2 1 DDJ42C 2 0·4 1 DDJ43C 3

L2 + N2 0·5

1 DDJ45C 5 0·6


Pre-wired tap-off units to pick up L1+N1 or L2+N2, supplied with BS 1362 fuse, colour coded white



L1 + N1 0·5

1 DDE45FC 5 0·6

1 DDJ408FC 0·8 0·2 1 DDJ42FC 2 0·4 1 DDJ43FC 3

L2 + N2 0·5

1 DDJ45FC 5 0·6



Rewirable tap-off units to pick up required circuit, colour coded white, can plug into any tap-off outlet


1 DDF4 L1 + N1 0·14 1 DDK4 L2 + N2 0·14


Rewirable tap-off units to pick up required circuit, supplied with BS 1362 fuse, colour coded white, can plug into any tap-off outlet


1 DDF4F L1 + N1 0·14 1 DDK4F L2 + N2 0·14

CL2

N2

L1

N1

PE

N1

L1

N2

L2

PE

DDK4F

CCC3245C

CCC2245C





DDJ45CDDJ45


34

Electrak® 33 4P + E (3 phase) Buscom trunkingpower and communication distribution









Pack Cat. Nos. Electrak 33 4P + E (3 phase) – single sided system

3 phase Buscom trunking system with integral communications bus circuit available in IP 4X and IP 54 versions Socket outlets are colour coded grey and are located on just one side of the bar




1 BBD3145C 3 6 4·77 1 BBD2145C 2 4 3·47 1 BBD3141C 3 3 4·75 1 BBD2141C 2 2 3·44 40 A 1 CCD3145C 3 6 4·97 1 CCD2145C 2 4 3·61 1 CCD3141C 3 3 4·93 1 CCD2141C 2 2 3·58




1 BBD14LFC 25 A left 1·29 1 BBD14RFC 25 A right 1·52 1 CCD14LFC 40 A left 1·38 1 CCD14RFC 40 A right 1·61




1 BBD44FC 25 A 1·80 1 CCD44FC 40 A 1·80


L3

L2

L1

N1

PE

C

CCD14LFC

CCD14RFCCCD142XC

CCD3145C

CCD2145C






35


Pack Cat. Nos. Electrak 33 4P + E (3 phase) – double sided system

3 phase Buscom trunking system with integral communications bus circuit available in IP 4X and IP 54 versions Socket outlets are colour coded grey and are located on both sides of the bar The comms circuit is only available on one side of the bar as shown in the diagram below




1 BBD3245C 3 11 5·46 1 BBD2245C 2 7 3·92 1 BBD3241C 3 6 5·37 1 BBD2241C 2 4 3·88 40 A 1 CCD3245C 3 11 5·86 1 CCD2245C 2 7 4·70 1 CCD3241C 3 6 5·77 1 CCD2241C 2 4 4·15


Double sided feed units come with 2 x 25 mm Ø cable entry holes for each side of the bar, plus a further 2 x 16 mm Ø. holes for the comms side of the bar. Single screw cable terminals are provided for power and data









Pack Cat. Nos. Tap-off units

Power only tap-offs can plug into any tap-off outlet of the 3 phase bar Tap-offs with comms can only be plugged into the comms side of the 3 phase bar


Pre-wired tap-off units to pick up required circuit, colour coded grey


1 DDM408L1C 0·8 0·2 1 DDM42L1C 2 0·4 1 DDM43L1C 3

L1 + N 0·5

1 DDM45L1C 5 0·6


L2 + N 0·5

1 DDM45L2C 5 0·6


L3 + N

0·5 1 DDM45L3C 5 0·6


Pre-wired tap-off units to pick up required circuit, supplied with BS 1362 fuse, colour coded grey, can plug into any Electrak 33 tap-off outlet


1 DDM408L1FC 0·8 0·2 1 DDM42L1FC 2 0·4 1 DDM43L1FC 3

L1 + N 0·5

1 DDM45L1FC 5 0·6


L2 + N 0·5

1 DDM45L2FC 5 0·6


L3 + N 0·5

1 DDM45L3FC 5 0·6

N

L1

L2

L3

L3

L2

L1

N

PE

PE

C

DDM408L1C DDM408L1

CCD3245C

CCD2245C






36


Pack Cat. Nos. Tap-off units without comms – rewirable


Rewirable tap-off units to pick up required circuit, colour coded grey, can plug into any Electrak 33 tap-off outlet


1 DDN4L1 L1 + N 0·14 1 DDN4L2 L2 + N 0·14 1 DDN4L3 L3 + N 0·14


Rewirable tap-off units to pick up required circuit, supplied with BS 1362 fuse, colour coded grey, can plug into any Electrak 33 tap-off outlet


1 DDN4L1F L1 + N 0·14 1 DDN4L2F L2 + N 0·14 1 DDN4L3F L3 + N 0·14

Phase selectable tap-off units without comms 2P + E terminals – rewirable


Rewirable tap-off units, phase selectable, colour coded grey, can plug into any Electrak 33 tap-off outlet


1 DDP4S L + N 0·14


Rewirable tap-off units, phase selectable, supplied with BS 1362 fuse, colour coded grey, can plug into any Electrak 33 tap-off outlet


1 DDP4SF L + N 0·14


Pack Cat. Nos. Tap-off units without comms – 4P + E pre-wired (LSOH 5 x 1·5 mm2 cable)


Pre-wired tap-off units to pick up required circuit, colour coded grey, can plug into any Electrak 33 tap-off outlet


1 DDR408 0·8 L + L + L + N 0·20 1 DDR42 2 L + L + L + N 0·36 1 DDR43 3 L + L + L + N 0·50 1 DDR45 5 L + L + L + N 0·63

DDR43DDN4L1F






37

Electrak® Buscom trunkingfixings and ancillary items

Pack Cat. Nos. Fixings

1 EEA304 Trunking 57 mm edge surface mounting fixing bracket

1 EEA308 Trunking suspended fixing bracket

1 EEA312 Trunking suspended fixing bracket c/w cable duct stirrup. Used when running cable duct on top of buscom trunking

1 EEA324 Luminaire suspension fixing bracket

1 EEA328 Luminaire 45 mm edge suspension fixing bracket (clip on)

1 EEA332 Luminaire 57 mm edge suspension fixing bracket (clip on)

1 EEB340 Open hook luminaire suspended bracket

1 EEB344 Closed ring on luminaire

1 EEC348 Cable duct 3 m long x 50 mm(w) x 13 mm(h)

1 EEC357 Joint bracket cable duct

1 EEC352 Cable duct fixing bracket

Pack Cat. Nos. Ancillary items

1 EEC356 2 m empty length for adjusting the length at the end of a run (to be cut)

1 EEC360 IP 54 outlet cover (spare or replacement)

1 EEC364 Joint sleeve is used if load is hung off trunking joint or near when joint is centre of a fixing span

1 EEC366 Left hand end stop spare

1 EEC368 Right hand end stop spare

Brackets are manufactured from robust galvanised steel, ensuring that the entire installation can be expected to stand up to all normal site conditions

EEA304

EEA308

EEA324

EEA312

EEA328 EEA332

EEB340 EEB344

EEC356

EEC360EEC352 EEC364

Dimensions and technical information p. 41

38

Electrak® Buscom trunkingtechnical information

25 A rated - max. conductor size 6 mm2

40 A rated - max. conductor size 16 mm2

Double sided trunking feed units have power cable terminals on both sides.IP 4X galvanised steel IP 54 ABS

Comms BUSMax. conductor size 1·5 mm2

Red + Black -

2 pole + earth + comms

Feed units

Track lengths simply push fit together

Electrak Buscom trunking can be used with Electrak’s cost effective lighting control system, Lightrak KNX, or any other systems using control protocols such as KNX, Lonworks, DALI, etc.Electrak’s overhead trunking couples high quality engineering with rigidity of design, and provides power for a variety of applications including lighting, heating and ventilation. The robust easy fix modular system permits loads to be suspended directly from the trunking using Electrak’s various fixing brackets Push fit connection keeps installation costs to a minimum

Direct protection by enclosure. Indirect protection by protective circuit

Electrical test data

Derating factor for Electrak 32 single sided – 0·8 –

Derating factor for Electrak 32 double sided 0·8 0·7 –

Derating factor for Electrak 33 double sided – 0·8 –

Rated operational voltage (Ue) 230/400 230/400 V±Rated insulation voltage (Ui) 500 500 V±Frequency (f) 50/60 50/60 Hz

Rated impulse withstand voltage 4·0 4·0 KV

Busbar resistance (R20

) 3·9 2·7 m /m

Resistance (R1) 4·2 3·0 m /m

Impedance (Z1) 4·8 3·4 m /m

Reactance (X1) 2·5 1·6 m /m

Protective conductor 1·5 1·5 m /m

UOM 25 A 40 A

Volt drops

Live and neutral : busbars 9·0 6·0 mV/A/m

(R1+R2) Feed unit 3·0 2·4 mV/A

Tap-off 0·8 m 22·0 22·0 mV/A

Tap-off 2·0 m 52·0 52·0 mV/A

Flexible length assembly 0·5 m 5·0 3·5 mV/A

Flexible length assembly 2 m 20·0 14·0 mV/A

UOM 25 A 40 A

Earth fault loop

Impedance : busbar 4·5 3·0 m /m

Earth housing 1·5 1·5 m /m

Feed unit 2·4 2·4 m

Tap-off 0·8m 23·0 23·0 m

Tap-off 2·0m 53·0 53·0 m

Flexible length assembly 0·5 m 2·5 1·75 mV/A

Flexible length assembly 2 m 10·0 7·0 mV/A

Rated conditional short-circuit current (Icc) 16·0 16·0 KA

Rated short time withstand current (Icw) at 1 sec 0·65 1·0 KA

Rated peak short-circuit current (Ipk) 0·975 1·5 KA

Ambient temperature 35·0 35·0 ˚C

UOM 25 A 40 A

Mechanical data UOM

Number of conductors 2-10 2-10 –

Busbar conductor cross sectional area 4·0 6·0 mm2

Cable terminal capacity 6·0 16·0 mm2

Cable terminal capacity bus 1·5 1·5 mm2

Tap-off cable 16 A 1·5 1·5 mm2

Tap-off cable 13 A fused 1·5 1·5 mm2

Tap-off entry 16·0 16·0 mmØ

Feed unit entry holes power 25·0 25·0 mmØ

Feed unit entry holes bus 16·0 16·0 mmØ

IP rating (optional) 4 X (54) 4 X (54) –

25 A 40 A

Standards

ASTA approved to BS EN 60439-2 and IEC 439-2Manufactured within an approved ISO 9001 : 2015 facilityAssessed Quality Assurance Certificate No. 10679Electrak fully complies with the requirements of BS 7671 (IET Wiring Regulations)

Buscom trunking options

• L2 • L3

• L2 • N2 • L2

• L • L1 • L1 • L1

• N • N • N1 • N

PE PE PE PE

Communication bus

39

Electrak® Buscom trunkingtechnical data

Fixing distance (m) 1·5 2 2·5 3 3·5 4

Max. point load (deflection = 1/500 x span) (Kg) 20 17 13 12 9 7

Max. distributed load (deflection = 1/500 x span) (Kg) 33 28 22 20 15 12



Average ambient air temperature 25˚C 30˚C 35˚C 40˚C 45˚C 50˚C

Rating factor (K1) 1·1 1·05 1 0·95 0·90 0·85

Fixing distance in metres (m) 1·5 2 2·5 3 3·5 4

Max. point load (deflection = 1/500 x span) (Kg) 10 6 4·5 4 3·5 3

Max. distributed load (deflection = 1/500 x span) (Kg) 16 10 7·5 7 6 5



Communication control circuit

Type Bus cable (LSOH)

Construction Sheathed 0·5 mm2 copper twisted pair

Insulation - conductor Flame retardant low emission HCL

Sheath LSOH material

Rated insulation voltage (Ui) (between power circuit and bus) 500 V

Max. bus operating voltage 50 V

Max. bus operating current 0·65 A

Max. conductor resistance (@20˚C) 73·2 /km

Max. mutual capacitance 100 nf/km

Material specifications

Buscom trunking housing Galvanised steel

Busbars High conductivity copper

Busbar insulator Flame retardant LSOH to BS 7211

Trunking connector / tap-off entry box / cable connector Flame retardant polycarbonate

Tap-off housing Flame retardant polycarbonate

Trunking connector blades / tap-off blades Copper

Feed unit IP 4X Galvanised steel

Feed unit IP 54 ABS

Flexible length conduit Flame retardant LSOH nylon

Feed unit terminals / earth block Brass

Brackets Galvanised steel

13 A tap-off, fuse To BS 1362, ASTA approved

Durability

Electrak power and communications distribution systems are well designed and extremely robust. They can be expected to stand up to all normal site conditions. Electrak has been short circuit strength tested by ASTA

Earth fault loop impedance

BS 7671 IET Wiring Regulations require accurate determination of the total earth loop impedance, which must be sufficiently low to allow the protective device to operate within the specified time, which for socket outlets is 0·4 seconds The values relevant to Electrak for calculating the earth fault loop impedance are shown in the electrical test data table, see opposite

Buscom trunking rating in ambient temperatures

For ambient temperatures other than 35˚C apply the multiplier factor K1 to the rated current

Buscom trunking mechanical loading

For point loads and evenly distributed loads the maximum weight that can be supported is given below

Maximum loading for suspended buscom trunking

Maximum loading for surface mounted Buscom trunking

Notes

1. Where trunking joints occur in the middle of the suspension span, and weight is to be suspended from that point, it is recommened to use a strengthening bracket EEC364 over the joint to stop deflection

2. If the load requirements exceed the above figures, please contact us on +44 (0) 370 608 9020 For design information and technical specification, please contact us on +44 (0) 370 608 9020 Suspension rods and fixings should be of suitable size to carry the weight of both the track and suspended load

40

Electrak® Buscom trunkingdimensions

Fixing dimensions

220 195·5

195·5

500 500 500 500 500 304·5

3 000

195·5 1 000 1 000

220 500 500 500 304·5

2 000

195·5 1 000 804·5

804·5

32

45

57

209 308

517

220 209

429

57

220 32010

148

10452

52

148

220 308

828

300

57

0·5 m outlet spacings




2 x 25 Ø

2 x 25 Ø

4 x 25 Ø2 x 25 Ø

(

218

2 x 16 Ø

2 x 16 Ø

2 x 16 Ø 2 x 16 Ø


Buscom trunking 3 m

Buscom trunking 2 m

Feed unit – left

End stop – right

Centre feed – front view

End stop – left Surface feed unit – end view

Feed unit – right

End view both have 2 x 16 mm holes

extra in comms feed

Double sided system

Single sided system

Buscom trunking

End view

Suspended feed unit

41

Tap-off

fuse removal

Fuse holder

96

68

136

68

107

927·5 7·5

30

57

60

7Ø 7 Ø

7 Ø

15

82 21

38

16

3

14

1

12

8·5 Ø

8·5 Ø

38 21

82

99

·7

94

·5

12

8·5 Ø

8.5 Ø22

60 35

30 6 Ø 6 Ø

70

13

78 30

39 6 Ø 6 Ø

53

·5

8·5

77

50

95 59

3513

70

M5

70

M5

82 21

38

13

0

12

5

10

8

128·5 Ø

8·5 Ø

Cat. No. EEA304 Surface trunking fixing bracket

with trunking clipped in

Cat. No. EEA308 Suspended trunking

fixing bracket

Cat. No. EEA312 Suspended trunking

fixing bracket cable duct stirrup

Cat. No. EEC352 Cable duct fixing

bracket

Cat. No. EEA324 Luminaire

suspended fixing bracket

Cat. No. EEA328 Luminaire 45 mm

edge suspension fixing bracket

Cat. No. EEA332 Luminaire 57 mm

edge suspension fixing bracket

Pre-wired tap-offs – 33 mm deep

Fused tap-off

Rewirable and phase selection

tap-offs – 35 mm deep

Cat. No. EEB344

Closed ring hookCat. No. EEB340

Open hook


Electrak® Buscom trunkingdimensions (continued)

42

EEA312

EEB344EEC352 Cable duct bracket

Ensure surface is level. Screw fix through both fixing holes of surface fixing brackets to surface with No. 8 fixing screws Hook trunking into place and push fit to close

Suspended trunking fixing brackets

Calculate the distance between fixing brackets - the maximum fixing distance should not exceed 4 m. If loads are to be hung, please consult loading charts on page 39. The maximum Buscom trunking weight is 2 kg/m When fixing brackets to drop rods or surfaces, see mounting details below

EEA304 57 mm Edge surface fixing bracket

Surface mounted trunking fixing brackets

2

1

Considerations before installation

Considerations before installation

Cable duct clips into bracket

When using cable duct along trunking

Electrak’s Buscom trunking system comprises continuous lengths of galvanised steel trunking available in 2 m and 3 m lengths with integral connectors and regular tap-off outlets on one or both sides

Each trunking run commences with a feed unit for electrical and comms bus cable termination. The connection between the trunking, the feed unit and subsequent trunking lengths is push fit and requires no tools to terminate the connection or ensure good earthing. Each complete track run is finished with an end stop. Flexible lengths can be used to overcome obstructions or used as corners where required

The trunking system is available with IP 4X or IP 54 ingress protection, fully factory tested and ASTA approved to BS EN 60439-2

1

2

Buscom trunking lengths

2

21

21

End stop

Left feed unit

To install - push fit parts together

To take apart - use a screwdriver to depress the locking catch

12

Push fit connection

Push in to release

1

Design and installation

EEA308

Electrak® Buscom trunkinginstallation

43

EEA324 Luminaire fixing brackets

EEA328 45 mm Edge luminaire fixing brackets (maximum load 5 kg)

EEA332 57 mm Edge luminaire fixing bracket (maximum load 5 kg)See maximum loading charts p. 39

Luminaire mounting fixing brackets : surface trunking

Luminaire mounting fixing brackets : suspended trunking

EEB344

EEA304

EEA332

EEA304

EEA332

EEB340


Electrak® Buscom trunkinginstallation (continued)

0488 75 15 0488 77 - 0489 18 - 0489 20 - 0489 61 - 0489 71 -

0784 61 15 0784 93 - 0784 95 - 0784 96 -

0882 30 15 0883 09 -

5742 03 15

7300 92 15 7300 94 - 7301 91 - 7354 14 - 7354 16 - 7354 90 -

8330 92 15 8330 94 - 8331 91 -

BBA14LFC 28 BBA14RFC - BBA24LFC 29 BBA24RFC - BBA34LFC 28 BBA34RFC - BBA44FC - BBA140XC 22, 28 BBA142XC 28 BBA240XC 23, 29 BBA242XC 29 BBA340XC 28 BBA342XC - BBA2141C - BBA2145C - BBA2241C 29 BBA2245C - BBA3141C 28 BBA3145C - BBA3241C 29 BBA3245C -

BBB14LFC 30 BBB14RFC - BBB24LFC 31 BBB24RFC - BBB34LFC 30 BBB34RFC - BBB44FC - BBB140XC - BBB142XC - BBB240XC 31 BBB242XC - BBB340XC 30 BBB342XC - BBB2141C - BBB2145C - BBB2241C 31 BBB2245C - BBB3141C 30 BBB3145C - BBB3241C 31 BBB3245C -

BBC14LFC 32 BBC14RFC - BBC24LFC 33 BBC24RFC - BBC34LFC 32 BBC34RFC - BBC44FC - BBC140XC - BBC142XC - BBC240XC 33 BBC242XC - BBC340XC 32 BBC342XC - BBC2141C - BBC2145C - BBC2241C 33 BBC2245C - BBC3141C 32 BBC3145C - BBC3241C 33 BBC3245C -

BBD14LFC 34 BBD14RFC - BBD24LFC 35 BBD24RFC - BBD34LFC 34 BBD34RFC - BBD44FC - BBD140XC - BBD142XC -

BBD240XC 23, 35 BBD242XC - BBD340XC 34 BBD342XC - BBD2141C - BBD2145C - BBD2241C 35 BBD2245C - BBD3141C 34 BBD3145C - BBD3241C 35 BBD3245C -

BDA14LFC 22 BDA14RFC - BDA24LFC 23 BDA24RFC - BDA140XC 22 BDA142XC - BDA2145C - BDA2245C 23 BDA3145C 22 BDA3245C 23

BVITM6L503100W 14 BVITM6L505100W - BVITM6L508100W - BVITM6-5-LL-03 - BVITM6-5-LL-05 - BVITM6-5-LL-08 - BVITM6-L5T500 - BVITM6-LPW - BVITM6-LPW-F -

CCA14LFC 28 CCA14RFC - CCA24LFC 29 CCA24RFC - CCA34LFC 28 CCA34RFC - CCA44FC - CCA140XC 22, 28 CCA142XC 28 CCA240XC 23, 29 CCA242XC 29 CCA340XC 28 CCA342XC - CCA2141C - CCA2145C - CCA2241C 29 CCA2245C - CCA3141C 28 CCA3145C - CCA3241C 29

CCA3245C 29

CCB14LFC 30 CCB14RFC - CCB24LFC 31 CCB24RFC - CCB34LFC 30 CCB34RFC - CCB44FC - CCB140XC - CCB142XC - CCB240XC 31 CCB242XC - CCB340XC 30 CCB342XC - CCB2141C - CCB2145C - CCB2241C 31 CCB2245C - CCB3141C 30 CCB3145C - CCB3241C 31 CCB3245C -

CCC14LFC 32 CCC14RFC - CCC24LFC 33 CCC24RFC - CCC34LFC 32 CCC34RFC - CCC44FC - CCC140XC - CCC142XC - CCC240XC 33 CCC242XC - CCC340XC 32 CCC342XC - CCC2141C - CCC2145C - CCC2241C 33 CCC2245C - CCC3141C 32 CCC3145C - CCC3241C 33 CCC3245C -

CCD14LFC 34 CCD14RFC - CCD24LFC 35 CCD24RFC - CCD34LFC 34 CCD34RFC - CCD44FC - CCD140XC -

CCD142XC 34 CCD240XC 23, 35 CCD242XC - CCD340XC 34 CCD342XC - CCD2141C - CCD2145C - CCD2241C 35 CCD2245C - CCD3141C 34 CCD3145C - CCD3241C 35 CCD3245C -

CDA14LFC 22 CDA14RFC - CDA24LFC 23 CDA24RFC - CDA142XC 22 CDA142XC - CDA2145C - CDA2245C 23 CDA3145C 22 CDA3245C 23

DBB 15

DDD432 23 DDD435 - DDD435F - DDD435FG - DDD435G - DDD452 - DDD455 - DDD455F - DDD455FG - DDD455G - DDD482 - DDD485 - DDD485F - DDD485FG - DDD485G -

DDE42C 29, 31 33 DDE42FC - DDE43C - DDE43FC - DDE45C - DDE45FC - DDE408C - DDE408FC -

0480 00

0780 00

0880 00

5740 00

7300 00

8330 00

BBA

BBB

BBC

BBD

BDA

BVIT

CCA

CCB

CCC

CCD

CDA

DBB

DDD

DDE

44

Cat. Nos.

Page

No.

Cat. Nos.

Page

No.

Cat. Nos.

Page

No.

Cat. Nos.

Page

No.

Cat. Nos.

Page

No.

45

DDF4 29, 31 33 DDF4F -

DDG42C 31 DDG42FC - DDG43C - DDG43FC - DDG45C - DDG45FC - DDG408C - DDG408FC -

DDH4 31 DDH4F -

DDJ42C 33 DDJ42FC - DDJ43C - DDJ43FC - DDJ45C - DDJ45FC - DDJ408C - DDJ408FC -

DDK4 33 DDK4F -

DDM42L1C 35 DDM42L1FC - DDM42L2C - DDM42L2FC - DDM42L3C - DDM42L3FC - DDM43L1C - DDM43L1FC - DDM43L2C - DDM43L2FC - DDM43L3C - DDM43L3FC - DDM45L1C - DDM45L1FC - DDM45L2C - DDM45L2FC - DDM45L3C - DDM45L3FC - DDM408L1C - DDM408L1FC - DDM408L2C - DDM408L2FC -

DDM408L3C 35 DDM408L3FC -

DDN4L1 36 DDN4L1F - DDN4L2 - DDN4L2F - DDN4L3 - DDN4L3F -

DDP4S 36 DDP4SF -

DDR42 36 DDR43 - DDR45 - DDR408 -

EEA304 37 EEA308 - EEA312 - EEA324 - EEA328 - EEA332 -

EEB340 37 EEB344 -

EEC348 37 EEC352 - EEC356 - EEC357 - EEC360 - EEC364 - EEC366 - EEC368 -

FFA001 14 FFA004 - FFA006 - FFA014 - FFA020 - FFA021 - FFA022 - FFA024 - FFA025 - FFA026 -

FFC060 15 FFC061 15

FFD062 14 FFDBCU - FFDDDB - FFDDDB1 - FFDDDB2 -

FFG300 15 FFG305 - FFG350 14

HEADEND 14

MWS3A-DBB 15

UHS5 15 UHS7 15

DDF

DDG

DDH

DDJ

DDK

DDM

DDN

DDP

DDR

EEA

EEB

EEC

FFA

FFC

FFD

FFG

HEA

MWS

UHS

Cat. Nos.

Page

No.

Cat. Nos.

Page

No.

Cat. Nos.

Page

No.

Head office (UK and Ireland):Legrand Electric LimitedGreat King Street North, Birmingham, B19 2LFTel: +44 (0) 370 608 9000 Fax: +44 (0) 370 608 9004Website: www.legrand.co.uk

9995

43 L

ight

rak

light

ing

cont

rol g

uide

06/

2018

.5k

This document is printed on sustainably sourced paper. Please recycle.

The Legrand logo is a registered trademarkof the Legrand group of companies.

In accordance with its policy of continuous improvement, theCompany reserves the right to change specifications and designswithout notice. All illustrations, descriptions, dimensions and weightsin this catalogue are for guidance and cannot be held binding onthe Company. All contents and design presentation included in thispublication are © Legrand Electric Limited. All rights reserved. 2018

Contact details Quotations and Technical Support: Legrand Electric Ltd. Great King Street North, Birmingham, B19 2LF Tel: +44 (0) 370 608 9020 Fax: +44 (0) 345 600 6760E-mail: [email protected]

Customer Services: Legrand Electric Ltd. No. 1 Industrial Estate Medmonsley Road, Consett County Durham, DH8 6SR Tel: +44 (0) 345 605 4333 Fax: +44 (0) 345 600 6366E-mail: [email protected]

Republic of Ireland: Tel: 01 295 9673 Fax: 01 295 4671E-mail: [email protected]

www.legrand.co.ukwww.legrand.ie

www.youtube.com/legrandtvuk

www.twitter.com/legranduk

www.voltimum.co.ukwww.voltimum.ie

FOLLOW US AT

Documents

Lightrak Lighting Control System · BUSBAR SYSTEM: With the Intelligent Busbar System, the Buscom trunking itself becomes the lighting control unit. Lights and control devices plug