Lightning and Surge Protection...Surge Protection Devices 18 Abbreviations 25 Index 26 Contact 27 In addition to the material offered in this catalogue, DEHN (UK) Ltd have a full range

www.dehn-international.comwww.dehn.co.uk

Lightning and Surge ProtectionSupplement Catalogue

Lightning Protection

2

Contents

Description PageEarth Electrodes / Earth Pits / Plates / Clamps 4Lightning Conductors 8Conductor Holders 10Clamps / Bimetal Components 12Equipotential Bonding 14Air-termination Rods and Systems 16Surge Protection Devices 18Abbreviations 25Index 26Contact 27

In addition to the material offered in this catalogue, DEHN (UK) Ltd have a full range of surge protection devices, external lightning / earthing protection components and safety equipment available.

Further details of our comprehensive product range can be found in our main catalogues or on our website www.dehn.co.uk

3

Earth Electrodes, Earth Pits, Plates, Clamps

4

Driving Stud

Material Diameter Weight Part No.

HT St 5/8´ÚNC, approx. 16 mm 0.08 kg DS16

A Model

Lattice Earth Mats

Material Dimensions Weight Part No.

Cu 600 x 600 x 3 4.0 kg EPL663

Cu 900 x 900 x 3 7.2 kg EPL993

A Model

Earth plate lattice copper.

Couplings


MS 5/8´ÚNC, approx. 16 mm 0.11 kg DCP16


MS 5/8´ÚNC, approx. 16 mm, 16 hexagon

0.13 kg DCP16H

A Model

16 mm diameter coupling round version.

B Model

16 mm hexagonal coupling for earth rods.

Copperbond Earth Rods

Material Rod Length

Diameter Shank Diameter

Weight Part No.

St/Cu 1200 mm 16 mm 14.2 mm 1.53 kg DBS1612

A Model

Copperbond earth rod to BS6651.

Material Rod Length

Diameter Shank Diameter

Weight Part No.

St/Cu 1200 mm 16 mm 14.2 mm 1.53 kg DBR1612

B Model

Copperbond earth rod not to BS.

Material Rod Length

Diameter Weight Part No.

St/Cu 1200 mm 9.5 mm 0.61 kg DBR9512C

C Model

Copperbond earth rod domestic type with clamp not to BS.

Earth Rod Inspection Pits


Concrete 280 x 280 x 130 mm 15.00 kg PIT2


Plastic 250 x 195 x 220 mm 1.20 kg PIT3

A Model

Concrete earth pit with inspection lid.

B Model

Plastic earth pit lockable by allen key with inspection lid.

Earth Bars for use in Earth Pit

Material Hole Size Weight Part No.

Cu M10 0.49 kg PIT5

Material Hole Size Weight Part No.

Cu M10 0.49 kg PIT6

A Model

5 hole for PIT2.

B Model

5 hole for PIT3.

5

6

Conductive Concrete / Moisture Retaining Clay

Earthing Procedures To improve the earthing resistance

Application notes regarding the benefits and use of MARCONITE and BENTONITE.

IntroductionThe resistance achieved by an earth system is determined by several factors. Most important amongst these is the amount of earth electrode surface area in contact with the ground and the resistivity of the ground in the immediate location of the earth nest. Resistivity can either be measured by carrying out a soil resistivity test or approximate figures can be obtained by reference to “ground type resistivity tables“ which can be found in most national earthing stand-ards (such as BS 7430:2011, Code of practice for Earthing).In situations where a low earth resistance is required, and is difficult to obtain, a soil conditioning agent can be used to advantage, typical use being in boreholes or to surround earth plates and lattice mats. In both cases good conductivi-ty must be ensured between the electrode and the sur-rounding ground. If the resistivity of the ground is too high to achieve the desired system resistance, soil conditioning agents can be used to obtain a better ground contact and lower resistivity.

MarconiteBy adding marconite to cement in place of sand a concrete which is highly conductive is formed. This helps to lower the resistance of earth rods, plates etc.

Bentonite is a moisture retaining clay which when used as a backfill with earth rods or plates will reduce soil resistivity by retaining moisture around the earth rod.

By adding MARCONITE instead of the sand and aggregate used in a standard conctete mix a highly conductive con-crete is formed. Used as a backfill material around the earth electrodes, it provides a conductive medium increasing the surface area of the electrode and ensuring a highly conduc-tive path between the earth electrode and the surrounding ground. Being a concrete it provides a permanent solution.

BENTONITE is a moisture retaining clay consisting of sodium montmorillonite. By mixing BENTONITE with water the resultant slurry will swell to many times its original dry volume. When used as a backfill material, within a borehole earth system, it will continue to absorb water from the sur-rounding soil thus helping provide a stable earth resistance. This is also true when the clay is used to surround earth plates and lattice mats. It strongly adheres to the earth electrodes ensuring good electrical conductivity between the electrodes and surrounding ground.

Weight Part No.

25.00 kg CC1

Weight Part No.

20.00 kg CC2

A Model

Marconite.

B Model

Bentonite.

Rod to cable clamp

Material Clamping range Weight Part No.

Gun metal Rod 9.5 mm (min.) – 16 mm (max.)Conductor 10 mm2 (min.) – 70 mm2 (max.)

0.07 kg RCC1

A Model

Made from high strength brass alloys.

Earth Rod Clamp


Gun metal For 16 mm rod and 25 x 3 mm tape

0.15 kg RTA1

A Model

Made from high strength gun metal.

Earth Rod to Cable Lug Clamp (Split Clamp)


Gun metal 16 mm threaded 0.34 kg SCT16


Gun metal 9.5 mm plain 0.08 kg SCP95

A Model

B Model

“U“ Bolt Rod Clamp


Gun metal 16 mm to 25 mm 0.20 kg UCR305/315


Gun metal 16 mm to 25 mm 0.26 kg UCR320


Gun metal 70 – 185 mm2 0.39 kg UCR70

A Model

B Model

Allows 25 x 3 mm tape to be connec-ted via additional plate.

C Model

Rod to cable clamp (type GUV).

7

Lightning Conductors

8

Hard Drawn Copper Bar

A Model

Hard drawn copper bar supplied in 2 meter lengths.

Material Dimensions Weight/m Part No.

Cu 25 x 6 mm 1.33 kg HDB256

Cu 50 x 6 mm 2.67 kg HDB506

High Conducting Copper Strip

Material Dimensions Coil size Weight/m Part No.

Cu 25 x 3 mm 25 m* 0.67 kg TC2530

A Model

Bare coated copper strip.

Material Colour Dimensions Outside Dimensions

Coil Size

Part No.

Cu/PVC black 25 x 3 mm 28 x 6 mm 25 m* TPBL253

Cu/PVC brown 25 x 3 mm 28 x 6 mm 25 m* TPBN253

Cu/PVC green 25 x 3 mm 28 x 6 mm 25 m* TPGN253

Cu/PVC grey 25 x 3 mm 28 x 6 mm 25 m* TPGY253

Cu/PVC stone 25 x 3 mm 28 x 6 mm 25 m* TPST253

Cu/PVC white 25 x 3 mm 28 x 6 mm 25 m* TPWH253

B Model

PVC coated copper strip.Weight/m 0.77 kg

* approx.

Aluminium Strip

A Model

Bare aluminium strip.

B Model

PVC covered aluminium strip.Weight/m 0.30 kg.

Material Colour Dimensions Outside Dimensions

Coil Size

Part No.

Al/PVC black 25 x 3 mm 28 x 6 mm 50 m* APBL253

Al/PVC brown 25 x 3 mm 28 x 6 mm 50 m* APBN253

Al/PVC green 25 x 3 mm 28 x 6 mm 50 m* APGN253

Al/PVC grey 25 x 3 mm 28 x 6 mm 50 m* APGY253

Al/PVC stone 25 x 3 mm 28 x 6 mm 50 m* APST253

Al/PVC white 25 x 3 mm 28 x 6 mm 50 m* APWH253

Material Dimensions Coil size Weight/m Part No.

Al 19 x 2 mm 50 m* 0.10 kg AT192

Al 25 x 3 mm 50 m* 0.21 kg AT253

Round Conductor

A Model

Bare copper round conductor.

B Model

Bare aluminium round conductor.

C Model

PVC coated copper round conductor.Weight/ m 0.49 kg.

D Model

PVC coated aluminium round conductor.Weight/ m 0.18 kg.

Material Colour Conductor Diameter

Outside Diameter

Coil Size

Part No.

Cu/PVC black 8 mm 10 mm 50 m* CSBL

Cu/PVC brown 8 mm 10 mm 50 m* CSBN

Cu/PVC grey 8 mm 10 mm 50 m* CSGY

Cu/PVC stone 8 mm 10 mm 50 m* CSST

Cu/PVC white 8 mm 10 mm 50 m* CSWH

Material Colour Conductor Diameter

Outside Diameter

Coil Size

Part No.

Al/PVC black 8 mm 10 mm 50 m* ASBL

Al/PVC brown 8 mm 10 mm 50 m* ASBN

Al/PVC grey 8 mm 10 mm 50 m* ASGY

Al/PVC stone 8 mm 10 mm 50 m* ASST

Al/PVC white 8 mm 10 mm 50 m* ASWH

Material Conductor Diameter

Coil size Weight/m

Part No.

Cu 8 mm 50 m* 0.44 kg CSC08

Material Conductor Diameter

Coil size Weight/m

Part No.

Al 8 mm 50 m* 0.12 kg CSA08

9

Conductor Holders

10

Non-metallic DC Tape Clip

Material Colour PU pc(s) Weight Part No.

PP brown 100* 0.01 kg DCBN


PP grey 100* 0.01 kg DCGY


PP black 100* 0.01 kg DCPBL

PP brown 100* 0.01 kg DCPBN

PP green 100* 0.01 kg DCPGN

PP grey 100* 0.01 kg DCPGY

PP stone 100* 0.01 kg DCPST

PP white 100* 0.01 kg DCPWH

A Model

Clip for bare 25 x 3 mm copper tape.

B Model

Clip for bare 25 x 3 mm aluminium tape.

C Model

Clip for PVC covered 25 x 3 mm tape.

* A

vaila

ble

in m

ultip

les

of 1

00.

DC Tape Clip

A Model Material Clip size Weight Part No.

Gun metal 25 x 3 mm 0.06 kg DCT253

Gun metal 31 x 6 mm (will fit 25 x 3 PVC coated tape)

0.10 kg DCT316

Adhesive base

A Model

Adhesive base.

Material Colour Weight Part No.

P grey 0.10 kg SAGY1

Slate Holdfast

A Model

For fixing flat bare or PVC covered con-ductor onto a slate or concrete tile roof.

Material Colour Weight Part No.

Al/PP black 0.05 kg SHF

Tape Clip

A Model

For use with bare 25 x 3 mm copper flat tape.

B Model

For use with PVC covered 25 x 3 mm copper tape.

Material Weight Part No.

Cu 0.02 kg TCC253


Cu 0.10 kg TCC316

Push-in Plastic Clip

A Model

For bare 8 mm round lightning conductors.

B Model

For PVC covered 10 mm round conductors.


PP brown 100* 0.01 kg DCBN8

PP grey 100* 0.01 kg DCGY8


PP black 100* 0.01 kg DCBL10

PP brown 100* 0.01 kg DCBN10

PP grey 100* 0.01 kg DCGY10

PP stone 100* 0.01 kg DCST10

PP white 100* 0.01 kg DCWH10 11

Clamps,Bimetal Components

Lightning Photo by Michael Bath, www.lightningphotography.com12

Flexible Copper Earth Braid Bond

A Model Material Dimensions Lug Ø Weight Part No.

Cu/gal Sn 25 x 3.5 x 200 mm 10 mm 0.09 kg FCB1

Cu/gal Sn 25 x 3.5 x 400 mm 10 mm 0.15 kg FCB2

Fixed Earthing Point

Material Hole size Weight PU pc(s) Part No.

Gun metal M10 0.40 kg 1 EP4

A Model

4-hole earthing point, no front plate.

B-Bond Clamp


Gun metal for 25 mm copper tape 0.10 kg BBC


Al for 25 mm aluminium tape 0.06 kg BBA

A Model

B Model

Test or junction Clamp


Gun metal for 25 x 3 mm 0.29 kg OTC


Al for 25 x 3 mm 0.12 kg ATC

A Model

Oblong for copper.

B Model

Oblong for aluminium.

Square Tape Clamp

Material Dimension Weight Part No.

Gun metal for 25 x 3 mm tape 0.22 kg STC253

A Model

Cast square clamp for copper tape.


Brass for 25 x 3 mm tape 0.22 kg STC253B

B Model

Extruded square clamp for copper tape.


Al for 25 x 3 mm tape 0.06 kg STA253C

C Model

Cast aluminium for aluminium tape.


Al for 25 x 3 mm tape 0.06 kg STA253

D Model

Extruded aluminium for aluminium tape.

Bimetal Connectors


StSt 0.20 kg BMC1SS

A Model

25 x 3 mm aluminium tape to 25 x 3 mm copper tape stainless steel version.


StSt 0.16 kg BMC2SS

B Model

8 mm aluminium to 25 x 3mm cop-per tape stainless steel version.


StSt 0.16 kg BMC3SS

C Model

8 mm copper to 8 mm aluminium stainless steel version.


Cu/Al 0.20 kg BMC1

D Model

25 x 3 mm Al to 25 x 3 copper tape.


Cu/Al 0.08 kg BMC2

E Model

8 mm aluminium to 25 x 3 copper tape.


Cu/Al 0.08 kg BMC3

F Model

8 mm copper to 8 mm aluminium.13

Equipotential Bonding

14

Earth Bars

Material Weight Dimensions Number of ways

Part No.

Cu 2.80 kg 520 x 85 x 105 mm 6 EB6

Cu 2.90 kg 520 x 85 x 105 mm 8 EB8

Cu 3.60 kg 650 x 85 x 105 mm 10 EB10

Cu 4.00 kg 755 x 85 x 105 mm 12 EB12

A Model

Earth bar without disconnecting link.


Part No.

Cu 2.90 kg 575 x 85 x 105 mm 6 EB6L1

Cu 3.20 kg 575 x 85 x 105 mm 8 EB8L1

Cu 3.90 kg 725 x 85 x 105 mm 10 EB10L1

Cu 4.40 kg 840 x 85 x 105 mm 12 EB12L1

Cu 4.80 kg 880 x 85 x 105 mm 14 EB14L1

B Model

Earth bar with single disconnecting link.


Part No.

Cu 3.40 kg 450 x 85 x 105 mm 6 EB62L

C Model

Earth bar with twin disconnecting links.

Material Weight Dimensions Part No.

Cu 0.6 kg 125 x 80 x 95 mm EBL

D Model

Disconnecting link.


(DMC) Polyester 0.123 kg 35 x 33 x 25 mm INS

E Model

Insulator complete with 2 off brass studs and 3 nuts M10 threads.

Other sizes and specials available upon request.

Perforated Copper Strip

A ModelMaterial Weight Dimensions Part No.

Cu 0.12 kg 23 x 1.5 mm TC2515P

RWP Bond

A Model

Pipework bond for copper 25 mm2

(Strip sold seperately).


Gun metal 0.12 kg RWPC

B Model

Pipework bond for aluminium 25 mm2 (Strip sold seperately).


Al 0.07 kg RWPA

15

Air-termination Rods and Systems

16

16 mm Air Terminal Bases and Air Rods


Cu 0.48 kg ATBC

A Model

Air terminal bases for 16 mm rods and 25 x 3 mm tape.


Gun metal 1.08 kg RS16

B Model

Ridge saddle for 16 mm rods and 25 x 3 mm tape.

C Model

16 mm air rods.


Cu 0.75 kg 500 x 16 mm CAR500

Cu 1.50 kg 1000 x 16 mm CAR1000

Cu 3.00 kg 2000 x 16 mm CAR2000

Multi-point Air Terminal

A Model

Copper multipoint air terminal with 1 m termination rod.


Cu 1.90 kg 185 x 125 mm+ 1000 x 16 mm

MPT/AIRROD

Rod Brackets and Rod to Tape Coupling

A Model

Rod brackets.


Gun metal 0.90 kg for 16 mm copper rods CRB

B Model

Rod to tape coupling.


Gun metal 0.23 kg for 16 mm copper rods & tape

TTRC

10 mm Air Terminal Bases and Air Rods


Gun metal 0.30 kg 50 x 50 x 25 mm ATBC10

A Model

Gun metal base.


Al 0.15 kg 50 x 50 x 25 mm ATBA10

B Model

Aluminium base.


Cu 0.60 kg 500 x 10 mm CAR500/10

Cu 1.20 kg 1000 x 10 mm CAR1000/10

C Model

Copper air rod.


Al 0.20 kg 500 x 10 mm AAR500/10

Al 0.40 kg 1000 x 10 mm AAR1000/10

D Model

Aluminium air rod.

17

Surge Protection DevicesA small selection from our comprehensive range

18

DEHNventil TNDV M TN 255Part No. 951 200

DEHNventil TNSDV M TNS 255Part No. 951 400

• High performance spark-gap-based combined arrester

• Wave Breaker function

• Protects terminal equipment

DEHNventil®: Type 1 + Type 2Combined Lightning Current and Surge Arrester

Technical Data

SPD according to EN 61643-11 / IEC 61643-11 type 1 + type 2 / class I + class II

Energy coordination with terminal equipment (≤ 5 m) type 1 + type 2 + type 3

Nominal voltage (a.c.) UN 230/400 V (50/60Hz)

Max. continuous operating voltage (a.c.) UC 264 V (50/60Hz)

Lightning impulse current (10/350) Itotal 50/100 kA

Lightning impulse current (10/350)/pole Iimp 25 kA 25 kA

Voltage protection level UP ≤1.5 kV

Follow current extinguishing capability (a.c.) Ifi 50 kArms

Max. mains-side overcurrent protection 315 A gL/gG

Approvals KEMA, VDE, UL, VdS

Types

DEHNventil TNC DV M TNC 255 (*FM) 951 300(*951 305)

DEHNventil TNS DV M TNS 255 (*FM) 951 400(*951 405)

DEHNventil TT DV M TT 255 (*FM) 951 310(*951 315)

DEHNventil TN DV M TN 255 (*FM) 951 200(*951 205)

DEHNventil TT 2P DV M TT 2P 255 (*FM) 951 110(*951 115)

• Operating-current-free with visual status indication

• Modular construction with optional (FM) auxiliary contacts

* FM Contacts. 19

20

DEHNshield TNDSH TN 255Part No. 941 200

DEHNshield TNSDSH TNS 255Part No. 941 400

• Space-saving spark-gap-based combined arrester

• Wave Breaker function

DEHNshield®: Type 1 + Type 2Combined Lightning Current and Surge Arrester

Technical Data

SPD according to EN 61643-11 / IEC 61643-11 type 1 + type 2 / class I + class II

Energy coordination with terminal equipment (≤ 5 m) type 1 + type 2 + type 3

Nominal voltage (a.c.) UN 230/400 V (50/60 Hz)

Max. continuous operating voltage (a.c.) UC 255 V (50/60Hz)

Lightning impulse current (10/350) Itotal 25/50 kA

Lightning impulse current (10/350)/pole Iimp 12.5 kA

Voltage protection level UP ≤ 1.5 kV

Follow current extinguishing capability (a.c.) Ifi 25 kArms


Approvals KEMA, VDE, UL

Types

DEHNshield TNC DSH TNC 255 941 300

DEHNshield TNS DSH TNS 255 941 400

DEHNshield TT DSH TT 255 941 310

DEHNshield TN DSH TN 255 941 200

DEHNshield TT 2P DSH TT 2P 255 941 110


• Operating-current-free with visual status indication

DEHNguard TNSDG M TNS 275Part No. 952 400

DEHNguard TNDG M TN 275Part No. 952 200

• High discharge capacity MOV-based surge arrester


DEHNguard®: Type 2Surge Arrester

Technical Data

SPD according to EN 61643-11 / IEC 61643-11 type 2 / class II

Nominal voltage (a.c.) UN 230/400 V (50/60 Hz)

Nominal discharge current (8/20) IN 20 kA



Approvals KEMA, VDE, UL, VdS

Types

DEHNguard TNC DG M TNC 275 (*FM) 952 300(*952 305)

DEHNguard TNS DG M TNS 275 (*FM) 952 400(*952 405)

DEHNguard TT DG M TT 275 (*FM) 952 310(*952 315)

DEHNguard TN DG M TN 275 (*FM) 952 200(*952 205)

DEHNguard TT 2P DG M TT 2P 275 (*FM) 952 110(*952 115)

• Visual status indication


* FM Contacts. 21

22

DEHNcordDCOR L 2P 275 Part No. 900 430

• Compact design surge arrester


DEHNcord: Type 2Surge Arrester

Types

DEHNcord 2-pole DCOR L 2P 275 900 430

DEHNcord 1-pole DCOR L 1P 275 900 431


• For use in flush mounted boxes, cable ducts, terminal equipment etc.

Technical Data

SPD according to EN 61643-11 / IEC 61643-11 type 2 / class II

Nominal voltage (a.c.) UN 230 V (50/60 Hz)

Nominal discharge current (8/20) IN 5 kA



DEHNrailDR M 4P 255Part No. 953 400

• High discharge capacity MOV based surge arrester


• Audible status indication

• For use in flush mounted boxes, cable ducts, terminal equipment etc.

DEHNrail®: Type 3Surge Arrester

DEHNflex® M: Type 3Surge Arrester

Types

DEHNrail 2-pole DR M 2P 255 (*FM) 953 200(*953 205)

DEHNrail 4-pole DR M 4P 255 (*FM) 953 400(*953 405)

Types

DEHNflex M DFL M 255 924 396



* FM Contacts. 23

24

DEHNrapidDRL 10 B 180 Part No. 907 400

• A comprehensive range of lightning and surge arresters is available for all telecom / data applications

For our full range of surge protection products see our dedicated surge protection catalogue DS570/UK/0114 or visit our website www.dehn.co.uk

Protection for Telecom / Data cables

Types

DEHNrapid LSA Type 1 for LSA strips 907 400(907 401 visual indication)

DEHNpatch Type 2 for Cat 6 RJ45 929 121 / 929 100

DEHNbox Type 1 for 2 pair Telecom 922 210

• Sample applications below

Abbreviations

The following list shows and explains all abbreviations

mentioned in the present catalogue.

Abbreviation in catalogue

Conductor Types

Fl Flat conductor

Rd Round conductor

Materials

Al Aluminium

St/Cu Steel, copper-coated

Cu Copper, electrical copper

Ms Brass

Cu/gal Sn Copper, tin-coated

P Plastic material / Polyethylene / Polyamide / Polystyrene

PVC Polyvinyl chloride

PP Polypropylen

HT St High tensile steel

Recommended values

Screw Tightening torque

M5 / M6 > 4 Nm

M8 > 10 Nm

M10 > 20 Nm

M12 > 25 Nm

Material combinations among air termination sys-

tems as well as down conductors and with parts of

the construction.

Steel (tZn) Aluminium Copper Stainless Steel Titanium Tin

Steel (tZn) Yes Yes No Yes Yes Yes

Aluminium Yes Yes No Yes Yes Yes

Copper No No Yes Yes No Yes

Stainless Steel Yes Yes Yes Yes Yes Yes

Titanium Yes Yes No Yes Yes Yes

Tin Yes Yes Yes Yes Yes Yes

Provided, that no especially aggressive environmental

influences have to be considered, the material combina-

tions listed below have proved themselves. This is based

on practical experience.

25

Index

Part No. Page

AAR500/10 17

AAR1000/10 17

APBL253 9

APBN253 9

APGN253 9

APGY253 9

APST253 9

APWH253 9

ASBL 9

ASBN 9

ASGY 9

ASST 9

ASWH 9

AT192 9

AT253 9

ATBA10 17

ATBC 17

ATBC10 17

ATC 13

BBA 13

BBC 13

BMC1 13

BMC2 13

BMC3 13

BMC1SS 13

BMC2SS 13

BMC3SS 13

CAR500 17

CAR500/10 17

CAR1000 17

CAR1000/10 17

CAR2000 17

CC1 6

CC2 6

CRB 17

CSA08 9

CSBL 9

CSBN 9

CSC08 9

CSGY 9

CSST 9

CSWH 9

DBR1612 5

DBR9512C 5

DBS1612 5

DCBL10 11

DCBN 11

DCBN8 11

Part No. Page

DCBN10 11

DCGY 11

DCGY8 11

DCGY10 11

DCP16 5

DCP16H 5

DCPBL 11

DCPBN 11

DCPGN 11

DCPGY 11

DCPST 11

DCPWH 11

DCST10 11

DCT253 11

DCT316 11

DCWH10 11

DS16 5

EB6 15

EB6L1 15

EB8 15

EB8L1 15

EB10 15

EB10L1 15

EB12 15

EB12L1 15

EB14L1 15

EB62L 15

EBL 15

EP4 13

EPL663 5

EPL993 5

FCB1 13

FCB2 13

HDB256 9

HDB506 9

INS 15

MPT/AIRROD 17

OTC 13

PIT2 5

PIT3 5

PIT5 5

PIT6 5

RCC1 7

RS16 17

RTA1 7

RWPA 15

RWPC 15

Part No. Page

SAGY1 11

SCP95 7

SCT16 7

SHF 11

STA253 13

STA253C 13

STC253 13

STC253B 13

TC2515P 15

TC2530 9

TCC253 11

TCC316 11

TPBL253 9

TPBN253 9

TPGN253 9

TPGY253 9

TPST253 9

TRWH253 9

TTRC 17

UCR305/315 7

UCR320 7

UCR70 7

Surge Protection Devices

Part No. Page

900 430 22

900 431 22

907 400 24

922 210 24

924 396 23

929 121 24

941 110 20

941 200 20

941 300 20

941 310 20

941 400 20

951 110 19

951 200 19

951 300 19

951 310 19

951 400 19

952 110 21

952 200 21

952 300 21

952 310 21

952 400 21

953 200 23

953 400 23

26

For more information, please visit our website: www.dehn.co.uk

DEHN (UK) Ltd focuses on the reliable protection of buil-dings, electrical and electronic systems and human life. Our pioneering spirit and innovative ideas have been defining our company for more than 100 years and made us a global market leader for

• Surge protection• Lightning protection/Earthing• Safety equipment

Our comprehensive product range of lightning protection and surge protection devices allows optimal, practical and customer-oriented protection solutions. Our ideas, sense of feasibility, intensive research and development, modern pro-duction facilities and comprehensive customer service make us a well-known expert and market leader in our sector.

We are always there to assist you with our experi-ence. With a team of specialist technical, office and sales personnel employed to help customers make the correct choice for surge and lightning protection, DEHN (UK) Ltd are qualified to help with many different projects and queries and has been involved in a number of prestigious projects.

Please contact:DEHN (UK) LtdUnit N8b Meltham Mills Industrial EstateMeltham, HolmfirthWest YorkshireHD9 4DS Tel.: 01484 859111Fax: 01484 859222Email: [email protected]

Contact

27

DS320/UK/1214 © Copyright 2014 DEHN + SÖHNE

Tel. +44 1484 859 111Fax +44 1484 859 [email protected]

Unit N8BMelham MillsMelthamHolmfirth, HD9 4DS

DEHN (UK) LtdSurge ProtectionLightning ProtectionSafety EquipmentDEHN protects.

actiVsense, BLITZDUCTOR, BLITZPLANER, DEHN, DEHN Logo, DEHNbloc, DEHNcare, DEHNfix, DEHNgrip, DEHNguard, DEHNport, DEHNquick, DEHNrapid, DEHNshield, DEHNsnap, DEHNventil, HVI, LifeCheck, Red/Line are protected by German Trademark, by Community Trademark (EU) and/or are registered trademarks in other countries. We accept no liability for technical modifications, misprints and errors. Illustrations are not binding.

www.dehn-international.com/partners

Documents

Lightning and Surge Protection...Surge Protection Devices 18 Abbreviations 25 Index 26 Contact 27 In addition to the material offered in this catalogue, DEHN (UK) Ltd have a full range