LIDOS MINING INSTALLATION MANUAL

Contents

1. Short Intro ....................................................................................................................................... 2

2. Synchronize LIDOS Mining data ...................................................................................................... 3

3. Install Security Client ....................................................................................................................... 4

4. Install LIDOS Mining ........................................................................................................................ 6

5. Install LIDOS Mining Web Service ................................................................................................... 9

For more details have a look in the LIDOS installation manual that can be found here:

http://lidos.liebherr.com/support/Files4FAQ_export/Documents/LIDOS_Inst_GB.pdf.

03.06.2011 Short Intro

Seite 2 von 11

1. Short Intro

This is a short intro how to install LIDOS Mining with data from the server step by step. For Details

have a look into the next topics of this manual.

1.1. Create an Active Directory Group “.XXX-LIDOS-Admin”, insert responsible members and

make it visible in MS Outlook. (Chapter 2)

1.2. Contact lidos@liebherr.com to request permission for this group on the server. (Chapter 2)

1.3. Mirror the LIDOS Mining data from \\lissvfile01.zdv.liebherr.i\LIDOS_Installations\MIN to

your own server. (Chapter 2)

1.4. Install ProSecCo Security Client from \\yourserver\yourlidosdirectory\D5PRG. (Chapter 3)

1.5. Request authorization code for LIDOS Mining. (Chapter 3)

1.6. Install LIDOS Mining on your local PC.

1.6.1. Single station (Chapter 4)

1.6.2. Single station with Data (Chapter 4)

1.6.3. Server and client installation (Chapter 4)

1.6.4. Web Service (Chapter 5)

03.06.2011 Synchronize LIDOS Mining data

Seite 3 von 11

2. Synchronize LIDOS Mining data

LIDOS Mining data are not available on DVD. For Liebherr intranet members, LIDOS data are available

on

\\lissvfile01.zdv.liebherr.i\LIDOS_Installations\MIN

To get permission to this server to synchronize the Mining data, create an Active Directory group

called “.XXX-LIDOS-Admin” in Outlook (XXX is for branch alias, e.g. “.LEC-LIDOS-Admin”). Put into this

group the necessary members who need access to the server. After creating and editing this AD

group, contact lidos@liebherr.com to request permission for this group on the server.

The directory \\lissvfile01.zdv.liebherr.i\LIDOS_Installations\MIN includes four folders called

“D5MIN”, “D5PRG”, “D5WEB” and “Tools”.

Source data will be updated weekly, normally on Monday. In case of problems during the data

generation or other delays, data will be updated on some other day a week. During the update

process folders temporarily do not exist. For example, while source data update, the folder “D5MIN”

will be renamed to “D5MIN$”. Do not touch this folder as long as it is renamed. After positive testing,

the folder will be activated again. In worst cases, the folders cannot be found for several hours.

Use a synchronization tool (e. g. Robocopy, AlwaysSync …) to mirror these data to your local server.

Make sure all four folders will be synchronized. Always synchronize the structure exactly like on

sources (destination folders must be placed in the same manner). Make sure, your synchronization

take place at night between 6:00 pm and 8:00 am one day a week and do not synchronize renamed

folders.

Never start any installation directly from \\lissvfile01.zdv.liebherr.i\LIDOS_Installations\MIN, to make

sure network traffic is not up to more than necessary.

03.06.2011 Install Security Client

Seite 4 von 11

3. Install Security Client

To work with the various LIDOS programs, they must be installed and properly licensed. For this

purpose, you need the “Professional Security Control Client” (“ProSecCo”) license utility. In the

“ProSecCo” utility, the authorization code sent to you by e-mail or fax must be entered and stored.

After the authorization code is registered, the “ProSecCo” license utility shows all programs that are

currently licensed and thus installable. You can continue with installing these LIDOS programs.

There are different applications in your location \\yourserver\yourlidosdirectory\D5PRG. Use

“SecurityClientXXXX.exe” (XXXX is for the version) to start the installation of ProSecCo security client.

03.06.2011 Install Security Client

Seite 5 von 11

3.1. After the installation of “ProSecCo” is completed, the “Licensing” form is displayed.

Complete the “Licensing” form and send it by e-mail or fax to the address indicated on the

form. Note in the e-mail or fax that this is for a LIDOS Mining installation to get the correct

authorization code. After having sent the request form by e-mail or fax, you will receive an

authorization code. Enter this code in the “Licensing” form and save it. Only after the

authorization code is saved, LIDOS can be installed.

3.2. After saving the authorization code, the “ProSecCo” license utility is opened. All programs

that are licensed with the stored authorization code and can thus be installed are listed.

Make sure, the at least these four entries shown in the screenshot are available.

3.3. Close “ProSecCo” license utility and go on with the LIDOS Mining installation.

03.06.2011 Install LIDOS Mining

Seite 6 von 11

4. Install LIDOS Mining

There are two applications in your location \\yourserver\yourlidosdirectory\D5MIN called

“setup.exe” and “update.exe”. Use “setup.exe” to lunch a new LIDOS installation and “update.exe”

to start an update to an existing LIDOS installation on the client. Start “setup.exe” for first LIDOS

installation on this PC.

4.1. The installation starts and checks whether there are any other programs running. If all

programs are closed, the “Welcome” window is displayed. Click on “Next”.

4.2. You have the opportunity to choose between these three different installation options.

Installation option 1: “Single station” (system data only)

Only the system data required to run the program is installed on the local PC. To run LIDOS,

a network drive connection to the server must exist.

Installation option 2: “Single station with data”

All data are copied to the local PC. Check out the data volume on the server and make sure

this space is available on your PC. If you have already installed a previous, only some of the

data is replaced and added, so that the space requirements are lower. By synchronizing the

data, the time required for an update is considerably shorter than that needed for an initial

installation.

03.06.2011 Install LIDOS Mining

Seite 7 von 11

Installation option 3: “Server”

Select this installation option if you wish to transfer the data to your own server. This has

the advantage that an unlimited number of workstations can work simultaneously using the

data on the server. The “Server” installation must always be followed by client installations

(option “Single station” or “Single station with data”). Only after the client installation is

completed, LIDOS can be used at the workstations.

Select your installation option and click “Next”

4.3. The “Select Destination Directory” window is displayed. By default, the LIDOS data is copied

to the directory “C:\LIDOS\LIDOS_MIN”. You have however the option to change the name

and location of this directory at any time. Choose your directory and click on “Next”.

03.06.2011 Install LIDOS Mining

Seite 8 von 11

4.4. The “Ready to install” window is displayed. Select whether you like to create a shortcut on

the desktop and you like to install the Zuken E3-Viewer. Click on “Next” to start the LIDOS

installation.

4.5. During the LIDOS installation process, the “Installation in progress, please wait…” window is

displayed.

4.6. After completion of the LIDOS installation process, the “Finished” window is displayed. The

LIDOS installation is completed successfully. Click on “Finish” to finish the installation.

4.7. To start LIDOS Mining, double-click the desktop shortcut or select

StartAll ProgramsLiebherr"LIDOS MIN ".

03.06.2011 Install LIDOS Mining Web Service

Seite 9 von 11

5. Install LIDOS Mining Web Service

There are two applications in your location \\yourserver\yourlidosdirectory\D5WEB called

“LIDOS_MIN_WEB.exe” and “LIDOS_MIN_WEBU.exe”. Use “LIDOS_MIN_WEB.exe” to lunch a new

LIDOS Web Service installation and “LIDOS_MIN_WEBU.exe” to start an update to an existing LIDOS

Web Service installation on the client. Start “LIDOS_MIN_WEB.exe” for first LIDOS Web Service

installation on this PC.

5.1. The installation starts and checks whether there are any other programs running. If all

programs are closed, the “Welcome” window is displayed. Click on “Next”.

03.06.2011 Install LIDOS Mining Web Service

Seite 10 von 11

5.2. In this dialog, select your installation option. Select option “Member of Liebherr Intranet” if

you are connected to the Liebherr intranet. Otherwise choose the option “WWW Internet”.

Click on “Next”.

5.3. The “Select Destination Directory” window is displayed. By default, the LIDOS data is copied

to the directory “C:\LIDOS\WebService”. You have however the option to change the name

and location of this directory at any time. Choose your directory and click on “Next”.

5.4. The “Ready to install” window is displayed. Select whether you like to create a shortcut on

the desktop and you like to install the Zuken E3-Viewer. Click on “Next” to start the LIDOS

installation.

03.06.2011 Install LIDOS Mining Web Service

Seite 11 von 11

5.5. During the LIDOS installation process, the “Running, please wait…” window is displayed.

5.6. After completion of the LIDOS installation process, the “Finished” window is displayed. The

LIDOS Web Service installation is completed successfully. Click on “Finish” to finish the

installation.

5.7. To start LIDOS Web Service, double-click the desktop shortcut or select

StartAll ProgramsLiebherr"LIDOS MIN WEBSERVICE".