Consumer units

designed for modern

living

THE GLOBAL SPECIALISTIN ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES

DESIGNis all around usModern interiors revolve around minimalist, sophisticated interior design themes consisting of clean lines, neutral tones and maximised use of space.

Designed to blend in with the modern environment, Legrand’s new consumer units are perfectly placed to stand the test of time.

WWW.LEGRAND.CO.UK

CONSUMER UNITS... DESIGN OF THE TIMES

Legrand’s insulated and metal consumer units are

manufactured to white RAL 9003, creating a stylish,

understated inish which blends in perfectly with

modern interiors.

MEETING THE DEMANDS OF MODERN LIVING

There is an increasing demand for additional electrical

circuits due to the popularity of smart home solutions,

and a growing requirement for dedicated circuits for

items such as hard wired smoke detectors, photovoltaic

panels and electric vehicle charging points.

Legrand’s consumer units are available with up to 22

ways, including a custom build option which offers

complete choice and lexibility.

The demands of modern

living have led to the

requirement for an

increased number of

electrical circuits

Discreet semi-flush mounting option available Growth in requirement for dedicated circuitsIncreasing popularity of home automation and control

3

design is more than

skin deep

With an array of design innovations making

them easy to install, Legrand’s consumer

units save valuable time and money during

installation... allowing you to relect on the

generous wiring space and the all-round

extra protection.

Legrand consumer units

are itted as standard with

80 A RCDs

Rigid base with

multiple cut-outs

Removable

pan assembly

Rail positioned

for maximum

cabling space

Removable terminal

holders with screws in

backed-off position

Insulated

shield

Hinged door conceals

protection devices and

labelling

Cut-to-length busbar

for lexible on-site

coniguration

White RAL 9003

case with high ire

retardancy.

Self extinguishing

at 750°C

4

WWW.LEGRAND.CO.UK

EASY ACCESS Features include a

removable pan assembly,

earth terminal holder that

simply clips into place, and

multiple cut-outs to the

unit’s back, bottom, top

and sides.

ON-SITE CONFIGURATION For lexible on-site

coniguration, simply cut

busbar to the required

length.

PROTECTION OPTIONS Legrand has everything

you need to complete

your installation: isolating

switches, RCDs, NEW RX3

MCBs and RCBOs.

Guide to choosing the right consumer unit coniguration

under the 17th Edition

Dual RCD split load with dedicated main switch ways -

Select MCBs and RCBOs to complete installation

Dual RCD split load -

Select MCBs to complete installation

Main switch incomer -

Select RCBOs to complete installation

RCD incomer -

Select MCBs to complete installation

Custom build -

Maximum lexibility

5

consumer unitsinsulated and metal

High integrity dual RCD split load with 2 unprotected ways100 A main switch and 2 x 80 A 30 mA RCD

Dual RCD split load100 A main switch and 2 x 80 A 30 mA RCD

Dual RCD split load -

semi flush100 A main switch and 2 x 80 A 30 mA RCD

Main switch incomer63 A main switch

Main switch incomer100 A main switch

RCD incomer80 A 30 mA RCD

Custom build

Insulated consumer units

Total outgoing ways

Conform to BS EN 60439-3. IP 30. RAL 9003. White colour. Plain door opens downwardsSupplied with neutral and earth terminals completely assembled. Supplied with 5 module spare blank plateFactory fitted link leads for both neutral and live connections. Configurable outgoing waysSelf-extinguishing at 750 °C. UL 94 V2 material for improved flame retardancy. Robust thermoplastic construction. 4 fixing holes

Dimensions p. 11

Metal consumer units

Conform to BS EN 60439-3. IP 30. RAL 9003. White colour. Plain door opens downwardsSupplied with neutral and earth terminals completely assembled. Supplied with 5 module spare blank plateFactory fitted link leads for both neutral and live connections. Configurable outgoing waysPre-galvanised steel for strength and rigidity. Epoxy/polyester powder coated base and lid

Dual RCD split load100 A main switch and 2 x 80 A 30 mA RCD

Main switch incomer100 A main switch

Custom build

Total outgoing ways

6 8 10 12 14 16 18 20 22

– – 6065 57 – – 6065 58 – – –

6065 59 – 6065 60 – – – – – –

– 6065 61 – 6065 62 – 6065 50 – – 6065 51

Dimensions p. 12

2 4 6 8 10 12 14 16 18 20 22

– – – – 6075 70 – – 6075 71 – – –

– – – – 6075 57 – – 6075 58 – – –

– – – – 8204 10 – – 8204 09 – – –

6075 63 – – – – – – – – – –

– – 6075 59 – 6075 60 – 6075 66 – – 6075 67 –

– – 6075 64 – 6075 65 – – – – – –

– 6075 68 – 6075 61 – 6075 62 – – – – –

NEW

6

7

6 A

10 A

16 A

20 A

25 A

32 A

40 A

50 A

63 A

Nominal rating (In)Number of 17.5 mmmodules

PackQty

10 1 4022 70 4023 10 1 6064 16

10 1 4022 71 4023 11 1 6064 17

10 1 4022 72 4023 13 1 6064 18

10 1 4022 73 4023 14 1 6064 19

10 1 4022 74 4023 15 – –

10 1 4022 75 4023 16 1 6064 20

10 1 4022 76 4023 17 1 6064 21

10 1 4022 77 4023 18 1 6064 28

10 1 4022 78 4023 19 – –

protection devicesMCBs and RCBOs

RX3 residential MCBs - 6 kASingle pole - 230/400 V±

RCBOs (combined MCB/RCD)Single pole and neutral - 240 V±

B curve C curve

30 mANumber of 17.5 mmmodules

B curve

RX3 MCBs - 6 kABreaking capacity : 6 kA to BS EN 60898-1

RCBOs (combined MCB/RCD)Breaking capacity : 10 kA to BS EN 61009-1

RCD type AC conform toBS EN 61009-1

Terminal capacity : rigid conductor 35 mm2

flexible conductor 25 mm2

6064 184022 70

8

insulated consumer unitssurface mounting

Accessories for surface mounting units

Lockable brackets

1 8218 57 For 16 module unit 1 8218 58 For 22 module unit

Padlock

3 4063 13 Ø 4 m

Conform to BS EN 60439-3. IP 30. RAL 9003 - white colourSelf-extinguishing at 750 °C - UL 94 V2 material for improved flame retardancyRobust, rigid thermoplastic construction with 4 fixing holesDoor opens downwardsSupplied with neutral and earth terminals completely assembledSupplied with 5 module spare blank plate (except 4 module unit)MCBs to be ordered separately, (see p. 10)Rigid base with multiple cut-outsRemovable terminal holders with screws in backed-off positionInsulated shieldCut-to-length busbarRemovable pan assembly

6075 63 6075 646075 57

Pack Cat. Nos. Insulated high integrity dual RCD split load with 2 unprotected ways - surface mounting

16 module unit (8 + 2 ways available)

1 6075 70 With 100 A main switch and 2 x 80 A 30 mA RCD

22 module unit (13 + 3 ways available)

1 6075 71 With 100 A main switch and 2 x 80 A 30 mA RCD

Pack Cat. Nos. Insulated custom build - surface mounting

Allow several configurations when using kits and incomers (isolating switches, RCDs, RCBOs)

For kits, (see p. 215) For incomers and outgoing devices, (see p. 10)

1 6075 68 4 modules available

1 6075 61 8 modules available

1 6075 62 12 modules available

6075 71

Dimensions p.11

RX3 residential MCBs and single module RCBOs p. 10

New

image

VC to

supply

NEW

Insulated dual RCD split load - surface mounting

16 module unit (10 ways available)

1 6075 57 With 100 A main switch and 2 x 80 A 30 mA RCD

22 module unit (16 ways available)

1 6075 58 With 100 A main switch and 2 x 80 A 30 mA RCD

NEW

NEW

Insulated with incomer - surface mounting

4 module unit

1 6075 63 With 63 A main switch (2 ways available)

8 module unit

1 6075 59 With 100 A main switch (6 ways available) 1 6075 64 With 80 A 30 mA RCD (6 ways available)

12 module unit

1 6075 60 With 100 A main switch (10 ways available) 1 6075 65 With 80 A 30 mA RCD (10 ways available)

16 module unit

1 6075 66 With 100 A main switch (14 ways available)

22 module unit

1 6075 67 With 100 A main switch (20 ways available)

NEW

Accessories for semi-flush mounting units

Lockable brackets

1 8204 71 For 16 module unit 1 8204 72 For 22 module unit

Padlock

3 4063 13 Ø 4 m

Insulated dual RCD split load - semi-flush mounting

16 module unit (10 ways available)

1 8204 10 With 100 A main switch and 2 x 80 A 30 mA RCD

22 module unit (16 ways available)

1 8204 09 With 100 A main switch and 2 x 80 A 30 mA RCD

NEW

NEW

9

Pack Cat. Nos. Accessories

Incomer or dual tariff kit

1 6075 19 Comprises : 1 flexible neutral (blue) lead 1 rigid neutral link

Split load kit

1 6075 39 Comprises : 1 flexible live (brown) lead 1 flexible neutral (blue) lead 2 rigid neutral links

Split load dual tariff kit (for insulated units only)

1 6075 49 Comprises : 1 flexible live (brown) lead 2 flexible neutral (blue) leads 2 rigid neutral links 1 neutral terminal

Spare blank plate RAL 9003

20 0016 60 5 modules - white colour

Spare blank plate RAL 9010

10 0016 64 18 module, separable by single or half modules

Spare busbar

5 6075 99 21 prongs

Spacing elements

10 4063 07 0·5 module

Locking device for MCBs and RCDs

2 4063 03 Locking attachment for Ø 4 mm and Ø 6 mm padlocks

Padlock for MCBs and RCDs

3 4063 13 Padlock Ø 4 m

Spare terminal block

1 8204 07 13 hole

Self-adhesive label holder

10 0049 96 Width : 16 mm Width available for marking : 12 mm Length 530 mm (24 modules)

Metal custom build - surface mounting

Epoxy/polyester powder coated base and lid Stand-off feet complete with keyhole fixing Allow several configurations when using kits and

incomers (isolating switches, RCDs, RCBOs) For kits, (see opposite) For incomers and outgoing devices, (see p. 10)

1 6065 61 8 modules available

1 6065 62 12 modules available

1 6065 50 16 modules available

1 6065 51 22 modules available

Metal with incomer - surface mounting

Epoxy/polyester powder coated base and lid Stand-off feet complete with keyhole fixing

8 module unit

1 6065 59 With 100 A main switch (6 ways available)

12 module unit

1 6065 60 With 100 A main switch (10 ways available)

metal consumer unitssurface mounting

accessoriesfor insulated and metal consumer units

Conform to BS EN 60439-3. IP 30. RAL 9003 - white colourPre-galvanised steel for strength and rigidityDoor opens downwardsSupplied with neutral and earth terminals completely assembledSupplied with 5 module spare blank plateMCBs to be ordered separately, (see p. 10)

6065 62

0049 96

Pack Cat. Nos. Metal dual RCD split load - surface mounting

16 module unit (10 ways available)

1 6065 57 With 100 A main switch and 2 x 80 A 30 mA RCD

22 module unit (16 ways available)

1 6065 58 With 100 A main switch and 2 x 80 A 30 mA RCD

Dimensions p. 12

RX3 residential MCBs and single module RCBOs p. 10

NEW

NEW

Available May

2013

NEW

NEW

protection and control devices

Pack Cat. Nos. RX3 residential MCBs - 6 kA

Breaking capacity : 6 kA to BS EN 60898-1 Single pole - 230/400 V± B curve C curve Nominal rating Number of (In) 17·5 mm modules

10 4022 70 4023 10 6 A 1 10 4022 71 4023 11 10 A 1 10 4022 72 4023 13 16 A 1 10 4022 73 4023 14 20 A 1 10 4022 74 4023 15 25 A 1 10 4022 75 4023 16 32 A 1 10 4022 76 4023 17 40 A 1 10 4022 77 4023 18 50 A 1 10 4022 78 4023 19 63 A 1

DX3 multi-purpose MCBs - 10 kA

Breaking capacity : 10 kA to BS EN 60947-2 Single pole - 230/400 V± B C B curve C curve Nominal rating Number of (In) 17·5 mm modules

1 1 4074 29 4076 66 6 A 1 1 10 4074 30 4076 68 10 A 1 1 10 4074 32 4076 70 16 A 1 1 1 4074 33 4076 71 20 A 1 1 1 4074 35 4076 73 32 A 1 1 1 4074 36 4076 74 40 A 1 1 1 4074 37 4076 75 50 A 1 1 1 4074 38 4076 76 63 A 1

4064 554020 27 4125 44 4130 91

Pack Cat. Nos. RX3 residual current devices (RCDs)

Conform to BS EN 61008-1 Terminal capacity : rigid conductor 35 mm2 flexible conductor 25 mm2

Double pole 230 V± Type AC Nominal rating Number of (In) 17·5 mm modules

30 mA

1 4020 24 25 A 2 1 4020 25 40 A 2 1 4020 26 63 A 2 1 4020 27 80 A 2

100 mA

1 4020 28 25 A 2 1 4020 29 40 A 2 1 4020 30 63 A 2

DX3 Isolating switches

Conform to BS EN 60947-3, IEC 60669-1 Usage : AC 22 according to IEC 60947-3 Red handle Double break contacts, padlockable 50 mm2 capacity shielded terminals

Number of

17·5 mm modules

5 4064 53 63 A double pole 2 5 4064 55 100 A double pole 2

CX3 Contactor with 230 V± coil

Conforms to BS EN 61095

Double pole (L + N) 250 V± 230 V± coil circuit

Type of Number of I max. contact 17·5 mm modules

1 4125 44 25 A 2 N/O 1

For other contactors, see current Industrial and Power Protection catalogue

230 V

6064 18

RCBOs (combined MCB/RCD) - Single module

Breaking capacity : 10 kA to BS EN 61009-1 RCD type AC conform to BS EN 61009-1

Terminal capacity : rigid conductor 35 mm2 flexible conductor 25 mm2

Single pole and neutral - 240 V± B curve Nominal rating Number of (In) 17·5 mm modules 30 mA 1 6064 16 6 A 1 1 6064 17 10 A 1 1 6064 18 16 A 1 1 6064 19 20 A 1 1 6064 20 32 A 1 1 6064 21 40 A 1 1 6064 28 50 A 1

Bell transformers

d Conform to IEC/EN 61558-2-8 Supplied with label holder Protected against overloads and short circuits Power to 8 V-12 V or 24 V access control devices

such as bells and chimes Possibility for supply busbars to run through (Cat. Nos. 4130 90/91)

Number

Secondary (V) Rating (A) Power (VA) of 17·5 mm

modules 230 V / 8 V

1 4130 90 8 V± 0·5 A 4 VA 2

230 V / 12 V - 8 V

1 4130 91 12/8 V± 0·66/1 A 8 VA 2

230 V / 24 V - 12 V

1 4130 93 24/12 V± 1/1·5 A 24/18 VA 4

NEW

4022 70

NEW

NEW

NEW

NEW

10

insulated consumer unitssurface mounting

B

A 110

50

195

40 50

20

90

4 cut-outs

20 x 25

1 cut-out

40 x 50

1 cut-out

50 x 50

4 cut-outs 20 x 25

225

114

4 cut-outs

25 x 25

2 cut-outs

20 x 25

n Insulated - surface mounting dimensions (mm)

n 4 module unitBack box fixing centres and cable entries (mm)

225

114

162

6 cut-outs

20 x 25 8 cut-outs

25 x 25

6 cut-outs 20 x 25

2 cut-outs

50 x 50

2 cut-outs

40 x 50

40 50

20

2 cut-outs

20 x 25

n 8 module unitBack box fixing centres and cable entries (mm)

225

180

268

2 cut-outs

50 x 50

2 cut-outs

40 x 50

40 50

20

6 cut-outs

20 x 25

2 cut-outs

20 x 18.5

2 cut-outs 20 x 18.5

22 cut-outs

25 x 20

2 cut-outs 20 x 25

2 cut-outs

20 x 25

n 12 module unitBack box fixing centres and cable entries (mm)

Modules A (mm) B (mm)

4 140 225

8 212 225

12 298 225

14/16 370 225

20/22 478 225

View fromsides

View frombelow

View fromabove

View fromsides

View frombelow

View fromabove

View fromsides

View frombelow

View fromabove

11

12

insulated consumer unitssurface mounting (continued)

40 50

20

10 cut-outs 20 x 25

2 cut-outs 50 x 50 2 cut-outs 40 x 50

30 cut-outs 25 x 20

22

5

18

0

340

8 cut-outs 20 x 25

2 cut-outs

20 x 25

n 14/16 module unitBack box fixing centres and cable entries (mm)

n 20/22 module unitBack box fixing centres and cable entries (mm)

View fromsides

View frombelow

View fromabove

10 cut-outs 20 x 252 cut-outs 20 x 22

2 cut-outs 20 x 22 12 cut-outs 20 x 25

42 cut-outs 25 x 20

22

5

18

0

448

2 cut-outs

20 x 25

40 50

20

2 cut-outs 50 x 50 2 cut-outs 40 x 50

View fromsides

View frombelow

View fromabove

metal consumer unitssurface mounting

B

A 113

50

200

4 cut-outs Ø 32

1 cut-out Ø 25

Ø 5

Ø 9

1 obround

cut-out 100 x 50

4

3

95

80

100

n Metal - surface mounting dimensions (mm)

n 8 module unitBack box fixing centres and cable entries (mm)

Modules A (mm) B (mm)

8 219 235

12 305 235

16 377 235

22 485 235

View frombelow

View fromabove

4 cut-outs Ø 20

4 cut-outs Ø 324 cut-outs Ø 25

2 obround

cut-outs 100 x 50

95

80

250

120

175

n 16 module unitBack box fixing centres and cable entries (mm)

4 cut-outs Ø 25

4 cut-outs Ø 328 cut-outs Ø 20

2 obround

cut-outs 100 x 50

95

80

350

120

275

n 22 module unitBack box fixing centres and cable entries (mm)

View frombelow

View fromabove

View frombelow

View fromabove

metal consumer unitssurface mounting (continued)

4 cut-outs Ø 32

2 cut-outs Ø 252 cut-outs Ø 20

1 obround

cut-out 100 x 50

95

80

175

100

n 12 module unitBack box fixing centres and cable entries (mm)

View frombelow

View fromabove

13

Co

nsu

me

r u

nit

pro

du

ct g

uid

e 0

4/2

01

3.P

DFHead ofice (UK and Ireland):

Legrand Electric LimitedGreat King Street North, Birmingham, B19 2LFTel: 0870 608 9000 Fax: 0870 608 9004Website: www.legrand.co.uk

The Legrand logo is a registered trademark of the Legrand group of companies.

Distributor:

This document is printed on sustainably sourced paper. Please recycle.

Contact details United Kingdom

Great King Street North, Birmingham, B19 2LF

Customer Services: Tel: +44 (0) 845 605 4333 Fax: +44 (0) 845 605 4334E-mail: legrand.sales@legrand.co.uk

Quotations and Technical Support: Tel: +44 (0) 870 608 9020 Fax: +44 (0) 870 608 9021E-mail: uk-wdsales@legrand.co.uk

Republic of Ireland: Tel: 01 295 9673 Fax: 01 295 4671E-mail: legrand.sales@legrand.co.uk