Upload
lykhanh
View
214
Download
2
Embed Size (px)
Citation preview
EX21
1014
-A
pril
2011
World Headquartersand International Department87045 LIMOGES CEDEXFRANCETel. : + 33 5 55 06 87 87Fax : + 33 5 55 06 74 55
www.legrandgroup.com
PERFORMANCEFROM TECHNICAL ROOM
TO WORKSTATION
L E G R A N D C A B L I N G S Y S T E M 2
EX211014_couv1-4+dos.indd 1 6/05/11 14:05:11
LEGRANDCABLING SYSTEM2
LCS2 copperSee pages 15 to 21
LCS2 fibre opticSee pages 22 to 27
LCS2 enclosuresSee pages 28 to 39
LCS2 workstationSee pages 40 to 49
LCS2 servicesSee pages 50 to 53
Catalogue referencesSee pages 54 to 109
Solutions from technicalroom to workstationSee pages 02 to 13
LCS2
1
02
LCS2 Cabling system productsComplete systems with a 20-year guarantee.The new LCS2 cat. 6A (up to 500 MHz),cat. 6 (up to 250 MHz) and cat. 5e (up to 100 MHz)systems have been designed as coherent entitiesto optimise their performance.The systems are suitable for optical fibre cables aswell as copper cables.See pages 14 to 39
Legrand SynergiesThe new LCS2 systems integrate perfectlyin the various other Legrand solutions:DLP trunking system, cabling accessories,cable management, etc.See pages 42 to 53
Towards network convergence.The IP convergence products (IP telephony,IP remote monitoring, IP access control)can also be a part of the LCS2 systems.
LCS2
from technical roomto workstation
LCS2
03
LCS2
APPLICATIONEXAMPLE
OFFICE
1
1 2 3
Access controlArea distribution box RJ 45 socket Patch panel
04
2
34
3 4
Access control Patch panel
LCS2
05
LCS2
APPLICATIONEXAMPLE
MALLCENTER Switch Mosaic Cablofil wire mesh
1
1
2
2
Cabling unit
06
2 3
3
4
4
Cabling unit Fibre optic socket
LCS2
07
Wi-Fi access point
LCS2
APPLICATIONEXAMPLE
CAMPUS
1 2
3
AVS socket DLP trunking system
08
RJ 45 with controlledaccess
Wi-Fi access point
1
2
2
3 4
4
LCS2
09
LCS2
APPLICATIONEXAMPLE
HOTEL
1 2
24
RJ 45 sockets 45° Retractable RJ 45 socket Patch cord
10
1
2 3
3
4
4
Retractable RJ 45 socket 19” wall-mountingcabinet
Patch cord
LCS2
11
ISO 11801 STANDARD Edition 2
0
10
20
30
40
50
60
70
80100 200
Frequency (MHz)
Ret
urn
Loss
(dB
)
300 400 500
1.23.64.57.8
System guaranteedperformance of the
Legrand systems
Category 6A
Network protocol supported
COMPONENTMEASUREMENT
LINK MEASUREMENT(CHANNEL)
STP Class EA / cat. 6A
500 MHz 250 MHz 500 MHz 250 MHz
10 Giga 1 Giga 10 Giga 1 Giga
Attenuation (dB)Loss of signal
LCS2
ISO 11801 Standard, Edition 2, Amendment 2(2)
TIA/EIA-568-C.2
0.130.45 max.0.45 max.
0.060.32 max.0.32 max.
35.442.1 max.49.3 max.
24.128.9 max.33.9 max.
Return Loss (dB)Echo resistance
LCS2
ISO 11801 Standard, Edition 2, Amendment 2(2)
TIA/EIA-568-C.2
17.0514 min.14 min.
26.5920 min.20 min.
16.48 min.6 min.
22.110 min.8 min.
Next (dB) Resistance tointerference between pairs(1)
LCS2
ISO 11801 Standard, Edition 2, Amendment 2(2)
TIA/EIA-568-C.2
37.4637 min.34 min.
56.9346 min.46 min.
38.129.2 min.26.1 min.
5435.3 min.33.1 min.
ACR-N (dB)(Alien Crosstalk Ratio)Actual power supplied
LCS2 37.33 56.87 2.7 29.9
Category 6
Network protocol supported
COMPONENT MEASUREMENTLINK
MEASUREMENT(CHANNEL)
STP FTP UTP Class E / cat. 6
250 MHz 250 MHz 250 MHz 250 MHz
1 Giga 1 Giga 1 Giga 1 Giga
Attenuation (dB)Loss of signal
LCS2
ISO 11801 Standard, Edition 2, Amendment 2(2)
TIA/EIA-568-C.2
0.090.32 max.0.32 max.
0.090.32 max.0.32 max.
0.090.32 max.0.32 max.
25.730.7 max.35.9 max.
Return Loss (dB)Echo resistance
LCS2
ISO 11801 Standard, Edition 2, Amendment 2(2)
TIA/EIA-568-C.2
29.816 min.16 min.
29.816 min.16 min.
29.816 min.16 min.
38.810 min.8 min.
Next (dB) Resistance tointerference between pairs(1)
LCS2
ISO 11801 Standard, Edition 2, Amendment 2(2)
TIA/EIA-568-C.2
51.346 min.46 min.
51.346 min.46 min.
51.346 min.46 min.
53.935.3 min.33.1 min.
ACR-N (dB)(Alien Crosstalk Ratio)Actual power supplied
LCS2 51.21 51.21 51.21 28.2
(1) Measurements taken on the 3-6 and 4-5 pairs (2) Values taken from the draft of the ISO 11801 standard Edition 2 amendment 2
Measurements of LCS2 components andlinks, validated by independent laboratories3 P Third Party Testing and ETL, havehighlighted its triple performance.Performance of the transmission in cat. 6A,performance of the installation, performanceof the maintenance.
Performance of the transmissionin cat. 6A
For long distance, 10 Giga guarantees only slightsignal loss for 100 m. For short distance, 10 Gigaguarantees a good echo resistance for 15 m.
Performanceof the installation
The values measured widely exceed therequirements of the ISO 11801 standard, Edition 2,amendment 2, thus providing a safetymargin to conform to the most rigorousconstraints of the installation.
Performanceof maintenance
Being committed to deliver a durable LCS2
system, Legrand gives a 20-year guaranteeon its performance.
1
2
3
(1) Measurements taken on the 3-6 and 4-5 pairs (2) Values taken from the draft of the ISO 11801 standard Edition 2 amendment 2
Note: all LCS2 products are RoHS compliant.
12
ISO 11801 STANDARD Edition 2
0
10
20
30
40
50
60
70
80100 200
Frequency (MHz)
Ret
urn
Loss
(dB
)
300 400 500
1.23.64.57.8
Category 6A
Network protocol supported
COMPONENTMEASUREMENT
LINK MEASUREMENT(CHANNEL)
STP Class EA / cat. 6A
500 MHz 250 MHz 500 MHz 250 MHz
10 Giga 1 Giga 10 Giga 1 Giga
Attenuation (dB)Loss of signal
LCS2
ISO 11801 Standard, Edition 2, Amendment 2(2)
TIA/EIA-568-C.2
0.130.45 max.0.45 max.
0.060.32 max.0.32 max.
35.442.1 max.49.3 max.
24.128.9 max.33.9 max.
Return Loss (dB)Echo resistance
LCS2
ISO 11801 Standard, Edition 2, Amendment 2(2)
TIA/EIA-568-C.2
17.0514 min.14 min.
26.5920 min.20 min.
16.48 min.6 min.
22.110 min.8 min.
Next (dB) Resistance tointerference between pairs(1)
LCS2
ISO 11801 Standard, Edition 2, Amendment 2(2)
TIA/EIA-568-C.2
37.4637 min.34 min.
56.9346 min.46 min.
38.129.2 min.26.1 min.
5435.3 min.33.1 min.
ACR-N (dB)(Alien Crosstalk Ratio)Actual power supplied
LCS2 37.33 56.87 2.7 29.9
Category 6
Network protocol supported
COMPONENT MEASUREMENTLINK
MEASUREMENT(CHANNEL)
STP FTP UTP Class E / cat. 6
250 MHz 250 MHz 250 MHz 250 MHz
1 Giga 1 Giga 1 Giga 1 Giga
Attenuation (dB)Loss of signal
LCS2
ISO 11801 Standard, Edition 2, Amendment 2(2)
TIA/EIA-568-C.2
0.090.32 max.0.32 max.
0.090.32 max.0.32 max.
0.090.32 max.0.32 max.
25.730.7 max.35.9 max.
Return Loss (dB)Echo resistance
LCS2
ISO 11801 Standard, Edition 2, Amendment 2(2)
TIA/EIA-568-C.2
29.816 min.16 min.
29.816 min.16 min.
29.816 min.16 min.
38.810 min.8 min.
Next (dB) Resistance tointerference between pairs(1)
LCS2
ISO 11801 Standard, Edition 2, Amendment 2(2)
TIA/EIA-568-C.2
51.346 min.46 min.
51.346 min.46 min.
51.346 min.46 min.
53.935.3 min.33.1 min.
ACR-N (dB)(Alien Crosstalk Ratio)Actual power supplied
LCS2 51.21 51.21 51.21 28.2
Measurements of LCS2 components andlinks, validated by independent laboratories3 P Third Party Testing and ETL, havehighlighted its triple performance.Performance of the transmission in cat. 6A,performance of the installation, performanceof the maintenance.
Performance of the transmissionin cat. 6A
For long distance, 10 Giga guarantees only slightsignal loss for 100 m. For short distance, 10 Gigaguarantees a good echo resistance for 15 m.
Performanceof the installation
The values measured widely exceed therequirements of the ISO 11801 standard, Edition 2,amendment 2, thus providing a safetymargin to conform to the most rigorousconstraints of the installation.
Performanceof maintenance
Being committed to deliver a durable LCS2
system, Legrand gives a 20-year guaranteeon its performance.
1
2
3
Measurement of the Return Losson a class EA linkOn each pair, the performances of LCS2
are significantly higher than the valuesrequired by the ISO 11801 Standard,Edition 2, amendment 2.
(1) Measurements taken on the 3-6 and 4-5 pairs (2) Values taken from the draft of the ISO 11801 standard Edition 2 amendment 2
Note: all LCS2 products are RoHS compliant.
LCS2
13
14
LCS2 COPPERA completesystem upto 10 Gbits/s
ConnectorsSee pages 16 to 17
Patch panelsSee pages 18 to 19
Patch cords and cablesSee pages 20 to 21
LCS2
CO
PP
ER
15
Insert the cablein the rear partVisibility of the marking asper the TIA/EIA code.Takes all cables currentlyavailable on the market:U/UTP, F/UTP and SF/UTP.
New LCS2
connectorPerformance ofthe installation
16
43
21
Turn to guaranteethe connectionSimply turn to flattenthe strands simultaneously. Cutthem, and the connector is ready!
Add the upper partof the connectorThe tamperproof insert givesease of movement.
Separate and insertthe strandsIntuitively maintain 13 mm,no need to measure.
RJ 45 connector is the core elementcontributing to the performance of theLCS2 system.You can obtain a perfect connection within a fewseconds guaranteeing an optimum performanceof the link from the patch panel to the RJ 45socket (see page 46).
Insert the cablein the rear partVisibility of the marking asper the TIA/EIA code.Takes all cables currentlyavailable on the market:U/UTP, F/UTP and SF/UTP.
New LCS2
connectorPerformance ofthe installation
LCS2
CO
PP
ER
17
LCS2 Patch panelsPerformance of
maintenance
The new LCS2
panels can also befitted with:
Better fixing by clampCable maintained in its cable guide.
18
19
Panels provided withquick-fixing system
Universal mountingany rack or cabinets.
LCS2 Patch panelsPerformance of
maintenance
The design of the new LCS2 patchpanels optimises the mounting andmaintenance.Maintaining the cables with cable guides,blocks of 6 RJ 45 connectors, clippingand unclipping each connector from thefront panel.
The new LCS2
panels can also befitted with:
Room formaintenanceSimple unclippingof LCS2 connectors.
Better fixing by clampCable maintained in its cable guide.
Telephone block FC type video broadcast block LC fibre optic cassette
LCS2
CO
PP
ER
19
Legrand cablesand cords
coherence andperformance
SHEATH MARKING STORAGE/TRANSPORTTEMPERATURE
OPERATINGTEMPERATURE
CAT. 7 S/FTPCABLE100 OHMS
LSZH in accordance with NFC 32062with flame retardant effect in accordancewith IEC 60332-1 & NFC 32070 2.1Ø 7.5 mm - Colour yellow RAL 1018
LEGRAND 32777 4 pair 23 AWG S/FTP 100 ohmsLSZH CAT. 7 900 MHz - VERIFIED TO ISO 11801IEC 60332-1 EN 50173 - TIA/EIA 568C - VPN/NVP.....% Batch no. + length in metres
0 to +50 °C -20 to +60 °C
CAT. 6A F/UTPCABLE100 OHMS
LSZH in accordance with NFC 32062with flame retardant effect in accordancewith IEC 60332-1 & NFC 32070 2.1Ø 7.8 mm - Colour yellow RAL 1018
LEGRAND 32778 4 pair 24 AWG F/UTP 100 ohmsLSZH CAT. 6A 500 MHz - VERIFIED TO ISO 11801IEC 60332-1 EN 50173 - TIA/EIA 568C - VPN/NVP.....% Batch no. + length in metres
0 to +50 °C -20 to +60 °C
CAT. 6 U/UTPCABLE100 OHMS
PVC or LSZH in accordance with NFC 32062with flame retardant effect in accordancewith IEC 60332-1 & NFC 32070 2.1Ø 6.4 mm - Colour blue RAL 5015
LEGRAND (4 pair or 2x4 pair) 24 AWG UTP 100 ohms250 Mhz (PVC or LSZH) CAT. 6 250 MHz - EC VERIFIEDTO ISO 11801 IEC 60332-1 EN 50173-1 TIA/EIA 568ABatch no. + length in metres
0 to +50 °C -20 to +60 °C
CAT. 6 F/UTPCABLE100 OHMS
PVC or LSZH in accordance with NFC 32062with flame retardant effect in accordance withIEC 60332-1 & NFC 32070 2.1 Synthetic waterrepellent tape Ø 7 mm - Colour blue RAL 5015
LEGRAND (4 pair or 2x4 pair) 24 AWG FTP 100 ohms250 Mhz (PVC or LSZH) CAT. 6 250 MHz - EC VERIFIEDTO ISO 11801 IEC 60332-1 EN 50173-1 TIA/EIA 568ABatch no. + length in metres
0 to +50 °C -20 to +60 °C
CAT. 6 SF/UTPCABLE100 OHMS
PVC or LSZH in accordance with NFC 32062 withflame retardant effect in accordance with IEC60332-1 & NFC 32070 2.1 Synthetic water repellenttape Ø 7.7 mm - Colour blue RAL 5015
LEGRAND 4 pair 24 AWG SFTP 100 ohms250 Mhz (PVC or LSZH) CAT. 6 250 MHz - EC VERIFIEDTO ISO 11801 IEC 60332-1 EN 50173-1 TIA/EIA 568ABatch no. + length in metres
0 to +50 °C -20 to +60 °C
CAT. 5e U/UTPCABLE100 OHMS
PVC or LSZH in accordance with NFC 32062with flame retardant effect in accordancewith IEC 60332-1 & NFC 32070 2.1Ø 5.2 mm - Colour light grey RAL 7035
LEGRAND CAT.NO (4 pair or 2x4 pair)24 AWG UTP 100 ohms (PVC or LSZH) CAT. 5e ECVERIFIED TO ISO 11801 IEC 60332-1 EN 50173-1TIA/EIA 568A Batch no. + length in metres
-15 to +70 °C +5 to +40 °C
CAT. 5e F/UTPCABLE100 OHMS
PVC or LSZH in accordance with NFC 32062with flame retardant effect in accordancewith IEC 60332-1 & NFC 32070 2.1Ø 5.5 mm - Colour light grey RAL 7035
LEGRAND CAT.NO (4 pair or 2x4 pair)CAT. 5e EC VERIFIED TO ISO 11801 IEC 60332-1EN 50173-1 TIA/EIA 568ABatch no. + length in metres
-15 to +70 °C +5 to +40 °C
To ensure total coherence of its LCS2
cat. 6A, cat. 6 and cat. 5e systems,Legrand offers a range of 4 twisted pair cablesin the four types: U/UTP, F/UTP, S/FTP, SF/UTP.
High-quality manufacturingManufactured to high quality standards,with thicker insulation to reduce the effectsof crosstalk, and reduction of the twist pitch of the pairs:the quality of Legrand cables is suitable for the LCS2
category 6A, category 6 and category 5e systems,ensuring high performance from the patch panel rightthrough to the RJ 45 socket. What's more, Legrand offersits cables in 2 versions with sheaths suitable for differentenvironments: LSZH and PVC. The 3P laboratoryhas certified all the Legrand cables to be compliantwith the ISO IS 11 801, EN 50173-1 standardsand TIA/EIA-568-C.2.See catalogue pages
Legrand cat. 6 F/UTP cable.
Legrand cat. 6A F/UTP cable.
Legrand cat. 6 SF/UTP cable.
Ensure high-quality continuity:perfectplug connection and transmission performance...
Available in several colours.
20
SHEATH MARKING STORAGE/TRANSPORTTEMPERATURE
OPERATINGTEMPERATURE
CAT. 7 S/FTPCABLE100 OHMS
LSZH in accordance with NFC 32062with flame retardant effect in accordancewith IEC 60332-1 & NFC 32070 2.1Ø 7.5 mm - Colour yellow RAL 1018
LEGRAND 32777 4 pair 23 AWG S/FTP 100 ohmsLSZH CAT. 7 900 MHz - VERIFIED TO ISO 11801IEC 60332-1 EN 50173 - TIA/EIA 568C - VPN/NVP.....% Batch no. + length in metres
0 to +50 °C -20 to +60 °C
CAT. 6A F/UTPCABLE100 OHMS
LSZH in accordance with NFC 32062with flame retardant effect in accordancewith IEC 60332-1 & NFC 32070 2.1Ø 7.8 mm - Colour yellow RAL 1018
LEGRAND 32778 4 pair 24 AWG F/UTP 100 ohmsLSZH CAT. 6A 500 MHz - VERIFIED TO ISO 11801IEC 60332-1 EN 50173 - TIA/EIA 568C - VPN/NVP.....% Batch no. + length in metres
0 to +50 °C -20 to +60 °C
CAT. 6 U/UTPCABLE100 OHMS
PVC or LSZH in accordance with NFC 32062with flame retardant effect in accordancewith IEC 60332-1 & NFC 32070 2.1Ø 6.4 mm - Colour blue RAL 5015
LEGRAND (4 pair or 2x4 pair) 24 AWG UTP 100 ohms250 Mhz (PVC or LSZH) CAT. 6 250 MHz - EC VERIFIEDTO ISO 11801 IEC 60332-1 EN 50173-1 TIA/EIA 568ABatch no. + length in metres
0 to +50 °C -20 to +60 °C
CAT. 6 F/UTPCABLE100 OHMS
PVC or LSZH in accordance with NFC 32062with flame retardant effect in accordance withIEC 60332-1 & NFC 32070 2.1 Synthetic waterrepellent tape Ø 7 mm - Colour blue RAL 5015
LEGRAND (4 pair or 2x4 pair) 24 AWG FTP 100 ohms250 Mhz (PVC or LSZH) CAT. 6 250 MHz - EC VERIFIEDTO ISO 11801 IEC 60332-1 EN 50173-1 TIA/EIA 568ABatch no. + length in metres
0 to +50 °C -20 to +60 °C
CAT. 6 SF/UTPCABLE100 OHMS
PVC or LSZH in accordance with NFC 32062 withflame retardant effect in accordance with IEC60332-1 & NFC 32070 2.1 Synthetic water repellenttape Ø 7.7 mm - Colour blue RAL 5015
LEGRAND 4 pair 24 AWG SFTP 100 ohms250 Mhz (PVC or LSZH) CAT. 6 250 MHz - EC VERIFIEDTO ISO 11801 IEC 60332-1 EN 50173-1 TIA/EIA 568ABatch no. + length in metres
0 to +50 °C -20 to +60 °C
CAT. 5e U/UTPCABLE100 OHMS
PVC or LSZH in accordance with NFC 32062with flame retardant effect in accordancewith IEC 60332-1 & NFC 32070 2.1Ø 5.2 mm - Colour light grey RAL 7035
LEGRAND CAT.NO (4 pair or 2x4 pair)24 AWG UTP 100 ohms (PVC or LSZH) CAT. 5e ECVERIFIED TO ISO 11801 IEC 60332-1 EN 50173-1TIA/EIA 568A Batch no. + length in metres
-15 to +70 °C +5 to +40 °C
CAT. 5e F/UTPCABLE100 OHMS
PVC or LSZH in accordance with NFC 32062with flame retardant effect in accordancewith IEC 60332-1 & NFC 32070 2.1Ø 5.5 mm - Colour light grey RAL 7035
LEGRAND CAT.NO (4 pair or 2x4 pair)CAT. 5e EC VERIFIED TO ISO 11801 IEC 60332-1EN 50173-1 TIA/EIA 568ABatch no. + length in metres
-15 to +70 °C +5 to +40 °C
To ensure total coherence of its LCS2
cat. 6A, cat. 6 and cat. 5e systems,Legrand offers a range of 4 twisted pair cablesin the four types: U/UTP, F/UTP, S/FTP, SF/UTP.
High-quality manufacturingManufactured to high quality standards,with thicker insulation to reduce the effectsof crosstalk, and reduction of the twist pitch of the pairs:the quality of Legrand cables is suitable for the LCS2
category 6A, category 6 and category 5e systems,ensuring high performance from the patch panel rightthrough to the RJ 45 socket. What's more, Legrand offersits cables in 2 versions with sheaths suitable for differentenvironments: LSZH and PVC. The 3P laboratoryhas certified all the Legrand cables to be compliantwith the ISO IS 11 801, EN 50173-1 standardsand TIA/EIA-568-C.2.See catalogue pages
Legrand cat. 6 SF/UTP cable.
Individually tested cordsLegrand patch cords ensure high-quality continuity in a cabling systemlike other components. Legrand therefore takes the same care withthe quality of its complete range of RJ 45 cords, which are certified by the3P laboratory as compliant with the standards. See catalogue pages
Tests on all parametersLegrand cords are individually tested, both for continuity andtransmission performance. All the parameters are measured: CR, ACR,NEXT, Return loss, Attenuation, etc. Cords which do not meet the criteriaare rejected. These tests guarantee transmission performance from oneend of the system to the other, with both class D and class E.
Universal cordsAvailable in cat. 6A, cat. 6 and cat. 5e versions and in the threecabling types (U/UTP, F/UTP and SF/UTP). Legrand cords are availablein different lengths, thus offering considerable flexibility of use.
Ensure high-quality continuity:perfectplug connection and transmission performance...
Available in several colours.
LCS2
CO
PP
ER
21
22
Fibre optic drawersSee pages 24 to 25
Connecting fibresSee pages 26 to 27
LCS2 FIBRE OPTICA simpleand reliable option
LCS2
FIB
RE
OP
TIC
23
30°
LCS2 Fibre opticdrawer
Complete accessibilityand ease in coiling
Can take allfibre opticconnectorblocks
19’’ Fibre optic drawerUp to 4 fibre optic blocks can be fitted:from 24 fibres ST or SC, 48 fibres LC.Equipped with grip handles.Height: Modular 1U.
Total accessibilityEnd stop, inclined at 30°.
24
30°
SC connector block19” High density fibre optic drawer
SC connector block19” Fibre optic drawer
LCS2 Fibre opticdrawer
Complete accessibilityand ease in coiling
The new LCS2 Fibre optic drawergives a better comfort ininstallation and maintenance.Reinforcements facilitating the opening andclosing, end stop inclined at 30° for completeaccessibility, coiling the fibres ensured by thein-built coiling accessories...
LC connector block19” Fibre optic drawer
Can take allfibre opticconnectorblocks
19’’ Fibre optic drawerUp to 4 fibre optic blocks can be fitted:from 24 fibres ST or SC, 48 fibres LC.Equipped with grip handles.Height: Modular 1U.
19’’ High density fibre optic drawerUp to 3 fibre optic blocks can be fitted:from 36 fibres ST or SC, 72 fibres LC.Equipped with grip handles.Height: Modular 1U.
Total accessibilityEnd stop, inclined at 30°.
Easier cable management.Integrated coiling accessories.Rear in the form of a tailto facilitate connection of incomingcables.
25
LCS2
FIB
RE
OP
TIC
Pre-fittedfibre optic
What is delivered?Each link is supplied with a test report. Length stands from connectorto connector, in metres. Links up to 50 m are conditioned in boxes(reel optional) and those over 50 m are supplied by reel. Connectors areprotected by a sheath. Pulling ring included. Multimode 62.5/125 µm cablecomplies with OM1 category, 50/125 µm with OM2 or OM3 categoryand single mode with OS1 category.
Connecting fibresLegrand simplicity
and performance
211
3 4
5 6
Legrand solutions, including the rapidcrimping connection process andpre-fitted fibre optic links on demandhave made a significant contribution to placing fibreoptics within the reach of installers, particularlyfor links within buildings or between buildings,over distances of less than two kilometres.
Connection takes just 3 minuteswith Legrand rapid connectorsThe average time for making this connectionis less than 3 minutes with rapid connectorsCat.Nos 331 06 to 331 13 incorporating a factorypre-polished fibre. After the operationsto prepare the fibre, there is no longer anyneed to glue or polish, or to check the qualityof the connection under a microscope!No oven, no drying. The factory pre-polishedconnectors and the crimping tool ensure that theoperation is simple and results in a high-qualityconnection.
TipConsider leaving some fibresin reserve for future developmentof the installation. If you require2 or 4 fibres now, install cables with6 or 8, or if you require 6 to 8 fibresnow, install cables with 10 to 12.
Split the fibre Cleave the fibre
Inspect the fibre Insert the fibre
Align the fibre Crimp the fibre
26
Pre-fittedfibre optic
Pre-fitted fibre optic links on demand:save time and cut risk to a minimum.Order your own individual solution: pre-fitted and factory tested,it will save you time on site while ensuring a high level of linkreliability. This minimises the risk of malfunctionduring the installation, thereby simplifying the acceptance test.
What is delivered?Each link is supplied with a test report. Length stands from connectorto connector, in metres. Links up to 50 m are conditioned in boxes(reel optional) and those over 50 m are supplied by reel. Connectors areprotected by a sheath. Pulling ring included. Multimode 62.5/125 µm cablecomplies with OM1 category, 50/125 µm with OM2 or OM3 categoryand single mode with OS1 category.
How to order1. Once your preparatory installation work is done,
determine the required length of cable.2. Indicate the required type of fibre:
- indoor, indoor/outdoor or outdoor- multimode 62.5/125 µm or 50/125 µm
or single mode 9/125 µm- number of cores (4, 6, 12, 24 for indoor applications,
outdoor applications and indoor/outdoor applications)3. Specify the type of connector: ST, SC or LC.4. State your preferred form of delivery: box or reel.
For furtherinformationPlease contact us!
6
Legrand solutions, including the rapidcrimping connection process andpre-fitted fibre optic links on demandhave made a significant contribution to placing fibreoptics within the reach of installers, particularlyfor links within buildings or between buildings,over distances of less than two kilometres.
Connection takes just 3 minuteswith Legrand rapid connectorsThe average time for making this connectionis less than 3 minutes with rapid connectorsCat.Nos 331 06 to 331 13 incorporating a factorypre-polished fibre. After the operationsto prepare the fibre, there is no longer anyneed to glue or polish, or to check the qualityof the connection under a microscope!No oven, no drying. The factory pre-polishedconnectors and the crimping tool ensure that theoperation is simple and results in a high-qualityconnection.
Crimp the fibre
LCS2
FIB
RE
OP
TIC
27
2828
LCS2 ENCLOSURESAND CABINETSEasy installationand efficientmaintenance
RacksSee pages 34 to 35
Wall mountedcabinetsSee pages 38 to 39
EnclosuresSee pages 30 to 33
Server enclosuresSee pages 36 to 37
LCS2
ENC
LOSU
RES
AN
D C
AB
INET
S
29
2
1
2
3
4
5
Optimised cablemanagementThe enclosures are offeringlots of space besides the19” uprights to guide and fixlarge quantities of cables.
19’’ LCS2 enclosuresOptimised
management of cablesand patch cords
30
1
2
5
3 4
1
EnclosuresThe structure allows easy cableentry at the top and bottom ofthe enclosure. In the case ofreduced room access space thestructure can be completelydismantled.
Linking interfaceProtects the cablesand guarantees thebending radius betweenenclosure and cabletrunking.
The design of the new LCS2 enclosuresfacilitates managing the cablesand patch cords.Easy association of a unit dedicated forcords, cable entry at the top made easy, newfeedthrough panels for perfect organisation ofpatching...
Optimised cablemanagementThe enclosures are offeringlots of space besides the19” uprights to guide and fixlarge quantities of cables.
Respecting of the bending radiusCable management panels with rings toguide and protect the patch cords.
Easy cable entryEnclosure and cablemanagement unit are equippedwith pre-cuts (19”) that acceptcable feedthrough panels.
19’’ LCS2 enclosuresOptimised
management of cablesand patch cords
LCS2
ENC
LOSU
RES
AN
D C
AB
INET
S
31
2
3
1
Easy installationDual marking of 19” uprights.
19’’ LCS2 enclosuressimplifiedassembly
Combinations thatanswervarious needs
32
2 3
1
Easy installationDual marking of 19” uprights.
19’’ LCS2 enclosuressimplifiedassembly
The new LCS2 enclosures canbe very easily assembled anddismantled.A considerable time-saving on thesites, complete accessibility thanksto the removable side and rear panelsand a structure that can be entirelydismantled.
Total accessibilityA structure that can becompletely dismantled.
Automatic grounding clipGuarantee of grounding forthe side and rear panels withthe automatic grounding clip.
Two 600-mm-wide enclosureswith a cabling unit.
Two 800-mm-wide enclosuresside by side.
Combinations thatanswervarious needs
LCS2
ENC
LOSU
RES
AN
DC
AB
INET
S
33
2
3
4
1
LCS² 19” racksAdvanced cable
management
Innovative cordmanagement cagesWith individual conduit for eachrack unit and door that opens inboth directions.
Light stainless-steelaluminium constructionWith black powder finish,resistant to marks andscratches.
34
31
4
2
LCS² 19” racksAdvanced cable
management
The new LCS² racks offer full cablemanagement for optimizing your networkperformance.In addition to the support strength, the LCS² cablemanagement systems provide flexibility from the systemdesign stage through to any future extensions.
Innovative cordmanagement cagesWith individual conduit for eachrack unit and door that opens inboth directions.
Light stainless-steelaluminium constructionWith black powder finish,resistant to marks andscratches.
Cord management panelswith coverWith conduits for vertical andhorizontal cord organization.
Integrated upper trunkingFor compliance with thebending radius and organizedrunning of cords.
35
LCS2
ENC
LOSU
RES
AN
D C
AB
INET
S
2
3
1
LCS² 19”Server enclosures
Completeaccessibility
36
1
2 3
LCS² 19”Server enclosures
Completeaccessibility
The new LCS2 server enclosures are designedfor complete accessibility.Complete accessibility not only via the doors andpanels, but also thanks to the rooftop pre-cutsand opening of the enclosure below.
Doors and panels with keylesslock system- front door with handle- perforated front and rear doors - 80% microperforation.
Cable entry- 19” High pre-cuts- open bottom.
Cable ductingSupport with screwless trayfixing - Cablofil.
37
LCS2
ENC
LOSU
RES
AN
DC
AB
INET
S
2
3
1
19’’LCS2
cabinetsEasy access,
high-quality finish
Flexible cable entriesIn DLP trunking system format.
Also availablein 10’’ version
38
2
3
1
19’’LCS2
cabinetsEasy access,
high-quality finish
The new LCS2 wall-mounting cabinets canbe fitted anywhere where maintainingaesthetic quality is very important.The removable side panels and flexible cableentries (in the fixed cabinets)facilitate access for quick installationand easy maintenance.
High-quality finishCurved door, screen-printedglass.
Flexible cable entriesIn DLP trunking system format.
Total accessibilityAlso available with pivoting bodyto enable easy access at the back.Removable side panelson all LCS2 cabinets.
Compact:LCS2 cabinet for small businesses.
Also availablein 10’’ version
39
LCS2
ENC
LOSU
RES
AN
DC
AB
INET
S
40
LCS2 WORKSTATIONThe networkat your hand
InstallationsupportsSee pages 44 to 45
Zone distributionboxesSee pages 42 to 43
RJ 45 SocketsSee pages 46 to 47
Wi-FiSee pages 48 to 49
LCS2
WO
RK
STAT
ION
41
Zone distributionboxes of
LCS2
consolidate andredistribute with
complete ease
2 blocks of 6 connectors can be fittedto connect up to 12 RJ 45 socketsDistribution close to the installation supports(see next page).
LCS2 Mosaicor Arteorfeedthroughsockets:Quick and reliableconnection,installation on allsupports
42
Zone distributionboxes of
LCS2
consolidate andredistribute with
complete ease
With the new LCS2 zone distributionboxes connected to the Mosaic or Arteorfeedthrough sockets, the result is completeflexibility.The connections close to the workstation arecentralised, copper and fibre optic are in a singlebox, etc. and the LCS2 performances are guaranteed.
Fibre optic/RJ 45 unionCopper and fibre areplaced side by side in thesame box.
RJ 45 socket with copper feedthrough for RJ 45 - RJ 45 cord. 2 x ST fibre optic feedthrough socket for optical patch cord.
2 blocks of 6 connectors can be fittedto connect up to 12 RJ 45 socketsDistribution close to the installation supports(see next page).
Coil rackFor fibre optic.
LCS2 Mosaicor Arteorfeedthroughsockets:Quick and reliableconnection,installation on allsupports
LCS2
WO
RK
STAT
ION
43
3
1
8
7
6
5
1
3
2 4
Cablofil
Mini-columns
Installation supportcable management
systems
End-to-end solutions:Legrand cable management systems allowdistribution of VDI cables and power cablesfrom the point of entry to the workstation.
44
3
1
5
2
64
87
6
1
Floor boxes
Network within reach.On the wall with trunking, on the ceilingwith columns, on the ground with floorboxes and desktop multi-outlet extensions ornearby with blocks and mini-columns.They are suitable for all work spaceconfigurations.
Cablofil
Mini-columns Columns
Desktop multi-outletextensions
Snap-on trunking
Office modulesMeeting room modules
Installation supportcable management
systems
End-to-end solutions:Legrand cable management systems allowdistribution of VDI cables and power cablesfrom the point of entry to the workstation.
LCS2
WO
RK
STAT
ION
45
Mosaic RJ 45 socketwith controlled access
Identify the protectedsupply networksto ensure the protectionof sensitive applications(for example: medicalequipment).
RJ 45 Socketswith highstandardsof Legrandaccessories
Organisationand safety
with the newMosaic sockets
46
Identify and restrictaccess to theuninterrupted powersupply networksto ensure continuouspower supply to computerequipment.
Structurethe specialsupplynetworks to isolatethe specificequipmentin the building.
Identify the protectedsupply networksto ensure the protectionof sensitive applications(for example: medicalequipment).
In the technical room, in a false ceilingor in the floor boxes and desktop multi-outletextensions, it is necessary to identify thespecial networks at a single glance.Video surveillance, access control, adjustingthe air conditioning, sensitive devices, etc.The Mosaic LCS2 sockets have a coloured cover,consistent with high-current sockets.
Identify the sensitiveinformation networksand control their accessusing a cover that can beunlocked using a key.
Structure the remote-supply networks(PoE injector) to use telephone,video applications on IP, etc.
Structure and protectthe networks byinsulating the sensitiveapplications.
CélianePleasing to the eyes
MosaicWhite or aluminium
RJ 45 Socketswith highstandardsof Legrandaccessories
Organisationand safety
with the newMosaic sockets
ArteorFlow of energies
LCS2
WO
RK
STAT
ION
47
Wi-Fi that canbe installed
just likeRJ 45 sockets
LCS2 PoE injector:Power supply toWi-Fi accesspoints from thepatch panels
48
230 V
INData(incoming switch)
OUT DATA + POWER SUPPLY
DATA + POWER SUPPLY
Patch cordRJ 45 ConnectorsPatch panel
Twisted paircables
Wi-Fi that canbe installed
just likeRJ 45 sockets
Wi-Fi access points can be fittedanywhere where unrestricted accessto the computer network is required.They can be fitted just like the RJ 45 sockets and on anysupports. The stability of performance and the durabilityof products are guaranteed (see page 53).
The Wi-Fi access points can be mountedon any support:Columns, mini-columns, snap-ontrunking, floor boxes, etc., mural or on Cablofil.
Wi-Fi access points:essential mobility...- In an environment where multiple Wi-Fi networks
operate together, to optimise the available speedeverywhere in the building (in compliance with802.11 a + b/g and 802. 11 n standards).
- In reception areas and passages, to provide networkaccess anywhere in the building (in compliance with the802.11 b/g and 802. 11 n standards).
- In shared work areas, to connect a computerpermanently and provide a wireless connectionto temporary users (in compliance with the802.11 a + b/g and 802. 11 n standards).
LCS2 PoE injector:Power supply toWi-Fi accesspoints from thepatch panels
LCS2
WO
RK
STAT
ION
49
Automatic determinationof catalogue numbers by selectingthe features and options.
Easy management of studiesTechnical records, purchaseorders, document printing.
New LCS Pro2
softwareYour LCS2 enclosure
in a few clicks
50
Automatic determinationof catalogue numbers by selectingthe features and options.
Easy management of studiesTechnical records, purchaseorders, document printing.
Visual display of the installationof the enclosure, modifications possible.
New LCS Pro2
softwareYour LCS2 enclosure
in a few clicksWith the new LCS Pro2 software,you can now very easily and quickly selectyour products, view your enclosure, etc.
For more informationCheck the LCS Pro2
software downloadable fromwww.legrandgroup.com
LCS2
SER
VIC
ES
51
Classes to convert the telephone and computer networkneeds of your clients into complete and upgradeable solutions,and cabling them as per the standards in force.
Classes to understanddifferent methodsof using an optical backbone and ofconnecting and testingthe optical links, as perthe standards in force.
Comprehensive classes- Copper installation: essential forcommercial sites- Optical fibre: useand testing of an installation- Copper: use and testingof an installation.
Structured cablingclasses:
A top-leveltraining
at Innoval
Being in close contact with engineers at thecutting edge of technological advances,Legrand trainers offer you practical classesin workshops.These are experienced people who understand yourbusiness and speak your language. We offer you veryuseful and practical classes.
Patch panelSockets Cables and cords
Patch panel
Assuranceof performance
Two guarantees to ensurethe durability of your installationsThe 20-year performance guarantee:Legrand offers the installer the guarantee of continuity
of performance levels of an LCS2 cat. 6A, LCS2 cat. 6 or LCS2
cat. 5e system on link or channel over time.The 20-year components guarantee: Legrand offers theinstaller the possibility of extending the usual guarantee from2 years to 20 years on all products used in link or channel.
- The components guarantee of the LCS2 cat. 6A, LCS2
cat. 6 or LCS2 cat. 5e systems: Legrand offers an extendedguarantee on the components of the LCS2 cat. 6A, LCS2
cat. 6 or LCS2 cat. 5e systems. 20 years for the components ofchannel or link, i.e. patch panels, RJ 45 sockets, cables andcords.The contractual 2-year guarantee on these products is thusextended to 20 years.
- The channel performance guarantee:A channel is defined by the standards as being an assemblyconsisting of the following components:patch cord, patch panel, cable, RJ 45 socket, usercord. During acceptance testing, the performanceof the channel is measured over a maximum lengthof 100 m. It must remain constant over time.
Conditions of the 20-year Performance GuaranteeAs with any guarantee contract, certain conditionsmust be met in order to qualify for the Legrand 20-yearPerformance Guarantee. These conditions are naturallywithin the capabilities of any company specialisedin the installation of structured cabling systems.The main conditions are given below (extracts fromthe 20-year Performance Guarantee issued by Legrand).The installer has stored the components in storageconditions suitable for their type.The installation has been built in strict compliancewith good practice and abiding by all the conditionslisted below.All the components used in the cabling system mustbe Legrand LCS2 cat. 6A, LCS2 cat. 6 or LCS2 cat. 5eCabling Systems components.All the patch cords used must be original Legrandproducts.The max. length of a cord must be 5 m.The installation must be built in accordancewith the recommendations defined in installationstandards EN 50174, EN 55022 and UTE C 15-900in force at the time of issue of the guarantee.Prior to the signature of the guarantee contract,Legrand will check that the installation acceptancetest data comply with the values specifiedin the standard.The installer must submit the following 4 documentsto Legrand:- The installation acceptance test for the linkor the channel- The “14 key points of a high performance installation”form, ticked and signed as agreement on its partof having complied with the 14 points- A full list of the products installed- An installation diagram of the patch cabinetsand the RJ 45 sockets.Any subsequent modifications or extensions must complywith the conditions listed above.
52
Being in close contact with engineers at thecutting edge of technological advances,Legrand trainers offer you practical classesin workshops.These are experienced people who understand yourbusiness and speak your language. We offer you veryuseful and practical classes.
Patch panelSockets Cables and cords
Patch panelSockets
Cables
Computer
Assuranceof performance
The performance of an installationmust stand the test of time.This is why Legrand guarantees the performanceand the components of its LCS2 cat. 6A, cat. 6 and cat. 5esystems over the entire channel or link for 20 years.
Two guarantees to ensurethe durability of your installationsThe 20-year performance guarantee:Legrand offers the installer the guarantee of continuity
of performance levels of an LCS2 cat. 6A, LCS2 cat. 6 or LCS2
cat. 5e system on link or channel over time.The 20-year components guarantee: Legrand offers theinstaller the possibility of extending the usual guarantee from2 years to 20 years on all products used in link or channel.
- The components guarantee of the LCS2 cat. 6A, LCS2
cat. 6 or LCS2 cat. 5e systems: Legrand offers an extendedguarantee on the components of the LCS2 cat. 6A, LCS2
cat. 6 or LCS2 cat. 5e systems. 20 years for the components ofchannel or link, i.e. patch panels, RJ 45 sockets, cables andcords.The contractual 2-year guarantee on these products is thusextended to 20 years.
- The channel performance guarantee:A channel is defined by the standards as being an assemblyconsisting of the following components:patch cord, patch panel, cable, RJ 45 socket, usercord. During acceptance testing, the performanceof the channel is measured over a maximum lengthof 100 m. It must remain constant over time.
Conditions of the 20-year Performance GuaranteeAs with any guarantee contract, certain conditionsmust be met in order to qualify for the Legrand 20-yearPerformance Guarantee. These conditions are naturallywithin the capabilities of any company specialisedin the installation of structured cabling systems.The main conditions are given below (extracts fromthe 20-year Performance Guarantee issued by Legrand).The installer has stored the components in storageconditions suitable for their type.The installation has been built in strict compliancewith good practice and abiding by all the conditionslisted below.All the components used in the cabling system mustbe Legrand LCS2 cat. 6A, LCS2 cat. 6 or LCS2 cat. 5eCabling Systems components.All the patch cords used must be original Legrandproducts.The max. length of a cord must be 5 m.The installation must be built in accordancewith the recommendations defined in installationstandards EN 50174, EN 55022 and UTE C 15-900in force at the time of issue of the guarantee.Prior to the signature of the guarantee contract,Legrand will check that the installation acceptancetest data comply with the values specifiedin the standard.The installer must submit the following 4 documentsto Legrand:- The installation acceptance test for the linkor the channel- The “14 key points of a high performance installation”form, ticked and signed as agreement on its partof having complied with the 14 points- A full list of the products installed- An installation diagram of the patch cabinetsand the RJ 45 sockets.Any subsequent modifications or extensions must complywith the conditions listed above.Active product
LCS2
SER
VIC
ES
53