A N N I E ’ S O N L I N E V I D E O C L A S S E S

Pantone uncoated (below)

Logo over stacked tagline

Logo next to stacked tagline

Logo alone

Minimum allowed sizes

Pantone uncoated (below)

Pantone uncoated (below)

4 color process (below)

4 color process (below)

4 color process (below)

Black (below)

Black (below)

Black (below)

White (below)

White (below)

White (below)

Annie’s Logo Purple: Pantone: 268C, GOE Medium Purple UCMYK: C82, M100, K12RGB: R82, G43, B133Hexadecimal: 522b85

Annie’s Logo Gray: Pantone: Cool Gray 9 UCMYK: 60KRGB: R130, G131, B134Hexadecimal: 828386

Color specifications:

Note: Symbols such as ®, ©, and ™ are never to appear as less than 5 pt. in size. If, in the event of reducing art to fit a space the symbol appears too small, that symbol must be reset to the minimum 5 pt. type size.

A art, pantone uncoated (below)

Pantone uncoated (below)

4 color process (below)

Black (below)

White (below)

Annie’s official logo, created 8/12(You must be familiar with the DRG corporate logo standards before any usage attempt.)

CraftsAnniesOnlineClasses.com

Learn to Make a Quilt From Start to Finish Instructor Nancy McNally

In this online video class, you’ll learn:

• How to choose the perfect fabrics for your quilt

• Which quilting tools are your “best buys”

• How to cut and piece each quilt block

• How to get a perfect ¼-inch seam allowance every time

• Time-saving tips like chain piecing, marking, pinning and more

• How to assemble a quilt sandwich

QDV11 Learn to Make a Quilt From Start to Finish

Learn to Make a Quilt From Start to Finish

This exclusive quilt project

is included as part of the class

curriculum

Bric & Stones Quilt

www.ClotildesSewingSavvy.com | Clotilde’s Sewing Savvy 25

�

Vintage Bunnies Wall Quilt

Sweet little bunnies in By Cheryl Fall for Coats & Clark

soft spring colors grace this wall hanging. It’s the perfect focal point for an Easter party or a wonderful quilt for a baby’s room.

FINISHED SIZE

191⁄2 inches square

MATERIALS

• 44/45-inch fabric

⁄ yard lilac print for inner border 1⁄4 yard small floral print for

outer border • 1 (6-inch square) each of blue, pink,

yellow and green prints for bunnies

• Scraps of coordinating blue, pink, yel-low and green prints for ears and tails

• 2 (71⁄2-inch squares) tone-on-tone white print

• 2 (71⁄2-inch squares) tone-on-tone off-white print

• 1⁄4 yard paper-backed fusible web

• 4 (71⁄2-inch) squares of iron-on, tear-away stabilizer

• 20-inch square backing fabric

• 20-inch square batting

• 1 spool Coats Dual Duty Plus All-Purpose Thread: Natural #256

• 1 spool coats Rayon Machine Embroidery Thread: Black #2

• 1 spool Coats Clear Nylon Monofilament Thread

• 1 package Coats Extra-Wide Double-Fold BiasTape: Natural #256

• 4 small white star buttons

• Permanent black ink pen or black embroidery floss

Cutting Wash all fabrics and press to remove

wrinkles before cutting.• From the lilac print, cut two strips each

1 x 141⁄2 inches for the top and bottom inner borders and two strips each 1 x 151⁄2 inches for the side inner borders.

• From the small floral print, cut two strips each 21⁄2 x 151⁄2 inches for the top and bottom outer borders and two strips each 21⁄2 x 191⁄2 inches for the side outer borders.

• Trace the appliqué shapes onto the paper side of the fusible web and cut out leaving a margin beyond the drawn lines. Apply each shape to the appropriate colored scrap following manufacturer’s directions. Cut out each shape on the drawn lines and remove the backing paper.

Assembly Refer to Figure 1 for all steps.

1. Position the appliqué shapes for each bunny on a 71⁄2-inch square and fuse in place following the manufacturer’s directions. Apply a square of stabilizer to the wrong side of each block.2. Adjust the machine for a short, narrow appliqué or blindstitch. Usingblack rayon embroidery thread in the sewing machine needle, stitch around

each appliqué. Pull the thread tails to the wrong side and tie off. Remove the stabilizer. 3. Sew the blocks together in two rows of two blocks each; press the seams in opposite directions so they will nest into each other for a perfect match when the rows are joined. Sew the rows together and press the seam in one direction. 4. Sew the inner borders to the top and bottom edges of the quilt top and press the seams toward the border. Sew the inner border strips to the side edges and press.5. Add the outer borders to the quilt in the same manner. Press the seams toward the outer borders.

�����������������������������������������������������������������������

MARCH 200 5 | Clotilde’s Sewing Savvy24

6. Layer the quilt top with batting andbacking and pin or hand-baste thelayers together.7. read the machine with clear nylonmonofilament thread in the needle and stitch in the ditch of all seam lines. Stitch again 1⁄4 inch from all seam lines. Outline-quilt around each bunnyappliqué 1⁄4 inch from the edges.

���������������������������

8. Machine-stitch 1⁄8 inch from the outer edge of the quilt top through alllayers.Trim the batting and backingeven with the quilt top.9. Bind the quilt with bias tape,mitering the corners. Sew a button toeach bunny (see photo); draw an eyewith permanent ink or make a largeFrench knot for each eye.

�

�������������������������������������������

����������� ��������������� �����������

������

�

����������� ��������������� �����������

������

������������������������ �����������

�

Table ToppersSeasonal

20 Quick-to-Stitch Projects

Order today at AnniesCatalog.comFind Us

• Easy for beginners, fun for the experienced

• Change your table decor for every season

NEW! From

Annie’s

151056$14.95