LBX Online Magazine

DEALS OF THE MONTH

WWW.LBXONLINE.COM

For classifieds call (800) 315-9950 or (615) 349-1890 or

With your smart phone: Scan QR Code to visit—

'95 VALMET 503 w/KOEHRING 16" SAW HEAD

Totally Rebuilt!Item ID: 12545Contact: TomPh: 800-315-9950 x604

Motivated Seller!Item ID: 12567Contact: DarenPh: 800-315-9950 x603

'04 PRENTICE 384 LOG LOADER W/CTR DELIMBER

Since 1986 - The Original (800) 315-9950 or (615) 349-1890

July 2012

For Classifieds Call Your LBX REP at 1-800-315-9950 July 2012 3

Traveling Arch SawHydraulically controlledNo manual cuttingOur most popular turn key system

Portable Yard SawModel 200MP-7-SS GasModel 100MP-7-SS Electric3 inch side shift, a standard feature

Automatic Strapping SystemAttach bottom crossersSide squeeze incorporatedPolyester strap Flush End Bump Rollcase

Reduce or eliminate your end trims

L-M Deck Cut Off Saw3 foot to 12 foot bar lengthsHydraulically controlled

PALLET STOCK, STUDS, I-JOISTS, STRUCTURAL COMPONENTS THE L-M SAWS, WILL TAKE YOU TO THE NEXT LEVEL!

The New L-M �“I-CUT�” Bundle cross cut system!* 60�’ long frame to precision cut your I-Joists* Precision accuracy of +- 1/32�”* Shorter system are available to process all your cutting needs* Tremendous labor savings, Guaranteed!

L-M Equipment Co. LtdPhone: 604-431-8800 Toll Free: 1-800-455-8807 Web Site: www.LMSaws.com E-Mail: [email protected]

The Verticut P4 System now offers scan and cut technology, reducing operator error by using a bar code system!

INTRODUCINGHFP150

FIREWOOD PROCESSOR

The HFP150 is the latest addition to

HFP150 Compact Firewood Pro

The HFP150 Compact Firewood Pro is:

HFP150 Compact Firewood Pro

1-800-483-8825

New the

Compact

A unique "Shuttle Trough" system carries the log up to the splitting wedge

The high speed chainsaw cuts a block 12" to 20" long

As the splitting cylinder pushes the block through the wedge, the Shuttle trough is

advancing the log for another cut

HGP150 Firewood Processor


FOR CLASSIFIEDS Call 800.315.9950

See pictures, prices, and Location of all equipment at

www.LBXonline.comCHIPPERS

2008 Dynamic 585 Chipper - Factory Rebuilt with upgraded components including new discharge chute, new larger bearings, new larger feed pins, new access panels to chip chamber wear plates. JD 500 HP engine with 2200 hours. Limited factory warranty on upgraded features. - Item ID-12059 - Tom 800-315-9950 x60448” Precision Chip Pack - Precision 48” 3 knife chip pac, 5x5 screener, with a brand new Y valve, 100 hp electric motor on the chipper, 15 hp motor on the blower, and a 3hp motor on the shaker. This machine is in very good condition and is ready to work. There is a vibrating conveyor available with this machine. Ask about details and price. - Item ID-12128 - Daren 800-315-9950 x60348” Precision Chip pack - 48” Precision Chip pack item is currently being refurbished and will have new knives, new holders, new bearings, new paint, and a 30 day warranty. This machine will be ready to work!!! Before and after photo - Item ID-12484 - Daren 800-315-9950 x603Precision 58” Chip Pack - Complete refurbished Precision 58” Chip Pack. This machine is been completely refurbished and is ready to work. - Item ID-12233 - Daren 800-315-9950 x603

Original

The Original Lumberman’s Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ad-vertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers the Lumberman’s Exchange, its prin-ciples and associates are not held liable for errors or omissions. Reproduction in whole or part prohibited with-out written consent.

©2012 by Woods Publishing.

Your #1 Source for Forest Industry

Products!

The Lumberman’s Exchange is published monthly and is circulated internationally to sawmills, loggers, pallet makers, recyclers and industrial wood-working plants.

PUBLISHER Woods Publishing

ADVERTISING SALES Morris Woods (615) 349-1890 [email protected]

DESIGN DIRECTOR Heninger & Associates [email protected]

EQUIPMENT REPS Equipment Representative Daren Bodine (800) 315-9950 x603

Equipment Representative Tom Hirt (800) 315-9950 x604

MAILING ADDRESS P.O. Box 1916 Columbia, TN 38402-1916 (615) 349-1890 Phone (931) 233-0802 Fax

AD SUBMISSIONS May be sent to— [email protected]

POSTMASTER Send address changes to: Lumberman’s Exchange P.O. Box 1916 Columbia, TN 38402

** INFO LINK **Amark ..........................................7American Leasing & Financial ..7B & B Mfg. .................................26B. H. Payne ................................13Baker .....................................6, 12Bartlett Saw Service ................38Bay Equipment .........................37Blockbuster ..............................32Brewer Eagle ...............................1Buck Equipment (AIM) ...........17Built Rite ...................................14Concept Products ....................27Cord Master ..............................20Corley Mfg .................................32CRD Metalworks .......................24CW Mill Equipment-Hogzilla ...33Dyna Products ..........................18Hahn Machinery .........................4James G. Murphy ............10, 11Kasco-SharpTech .......................9

Lignomat ...................................21Litco ...........................................13LM Equipment, Canada .............3M&F Gauge ................................17Machinery Sales Co., Inc. ..........8Metal Detectors, Inc. ...............28Midwest Sharpening Service ..19Multitek .....................................16Phase-A-Matic ...........................21Piper’s Saw Shop ......................30Resource Recovery ..................35Rotochopper ............................40Row Electric..............................25Sawmill Exchange ....................31Sharp Tools ...............................15Suffolk Machinery ......................2Thomas Tire, Commercial ......29US Blades ..................................36Weaver Electric ........................22Wood-Mizer .........................23, 39

** CALENDAR **THE PAUL BUNYON SHOW The Original American Forestry ShowComing October 5–7, 2012 8 a.m. – 5 p.m. Friday and Saturday 8 a.m. – 3 p.m. Sunday Guernsey County Fairgrounds Old Washington (Cambridge), Ohio

MID-SOUTH FORESTRY EQUIPMENT SHOW Details at www.midsouthforestry.orgComing October 5 & 6, 2012 Starkville, Mississippi Book Space Soon! Choice site going fast!

11 PBS Ad 4.125x10.875.indd 1 6/23/11 8:09 AM

** Auctions **JAMES G. MURPHY — Page 10

www.murphyauction.comINTERMOUNTAIN RESOURCES

2 COMPLETE MILLS—MONTROSE, CO & SARATOGA, WY Thurs

Auction to be held in Denver, Colorado

Bid Live or Bid Online with MurphyLive!

JAMES G. MURPHY — Page 11www.murphyauction.com

HUMBOLDT FLAKEBOARD PANELS, INC. HAMBRO FOREST PRODUCTS, INC.

4700 West End Road, Arcata, California

If y

ou

ne

ed

to

Ch

an

ge

yo

ur

Ad

dre

ss o

r

Ad

d Y

ou

r N

am

e t

o o

ur

ma

ilin

g l

ist,

th

en

p

lea

se c

om

ple

te t

his

fo

rm a

nd

ma

il t

o:

The

Original L

umbe

rman

’s E

xcha

nge

Ple

ase

Add

Ple

ase

Chan

ge

Ple

ase

Rem

ove

Co

mp

an

y N

am

e*

*Com

pany

nam

e an

d ad

dres

s re

quire

d to

pro

cess

you

r cha

nge.

6 The Original Lumberman’s Exchange Visit us online at www.LBXonline.com!

EQUIPMENTREPRESENTATIVES

Daren Bodine Phone: 800-315-9950 Ext. 603

Tom HirtPhone: 800-315-9950 Ext. 604

CALL US TODAY FOR ALL YOUR USED

EQUIPMENT NEEDS!

FREE EQUIPMENT LISTINGS! CALL –(800) 315-9950

The Most

Popular Band

Resaw in the

World!

The Model “A” Baker Band Resaw:One of the All-Time Greats!

[email protected]: (800) 548-6914www.logtolumber.com

WANTEDRotochopperEC266 300 hp518C Grapples SkiddersBarko 160 LoadersBell Tracked Feller BunchersLogging TrucksPallet EquipmentContact: Daren

(800) 315-9950 x603

www.LBXonline.com

DEALS OF THE MONTH

-JUNE-

For classifieds call (800) 315-9950 or (615) 349-1890 or

WWW.LBXONLINE.COM

With your smart phone: Scan QR Code to visit—

'09 JD 437C LOADER W/ DELIMBER

Great Value!Item ID: 12523Contact: TomPh: 800-315-9950 x604

Complete Rebuild!Item ID: 12302Contact: DarenPh: 800-315-9950 x603

'95 CAT 518C GRAPPLE SKIDDER

Precision 58” Chipper - Complete rebuilt Precision 58” Chipper with Factory Warranty. - Item ID-12232 - Daren 800-315-9950 x603º

COMPLETE SAWMILLSCircle Sawmill - Includes

Mellot conveyor, Carthage carriage, Helle setworks, Helle log turner, hydraulic power pack 25-hp, 100hp electric motor, 25hp electric motor and all starters. - Item ID-11992 - Michelle 800-315-9950 x603Frick Automatic Sawmill - 3 Head Block, Tyrone Berry Feed, 250 H.P. Cummins Power Unit, 4 Strand Live Deck With Stop And Load, Chain Type Log Turner, Frick

Edger, Live Rollers, 30 Ft. Live Belt, 18 Ft. Green Chain. Ready To Work! - Item ID-12217 - Chris 800-315-9950 x600Meadows #2 Sawmill - Meadows #2 carriage - 15’ OAL with 4 headblocks - 3 hydraulic dogs - 5 axles, hydraulic setworks with pantograph arm assembly to carry hydraulic & electric lines from carriage to husk - clock face lumber dial - controls for setworks & dogs. Meadows #2 track frame, with idler assembly. Reckart hydraulic feed package with 40-hp electric motor. Mellott log turner. 35’ log deck with stop & load. 130KW generator. - Item ID-11086 - Michelle 800-315-9950 x603


Let us reprocess them $25 per 100

Now have Factory Seconds $25 per 100 sticks

Save

Your

Stubs &

Pieces!

Now Accepting

Visa & Mastercard

FINANCE YOUR EQUIPMENT PURCHASE TODAYNo Down Payment on Most TransactionsApplication Only up to $100,000Programs in “All Fifty States”Loans and Leases AvailableSame Day Approvals—Next Day Funding

(800) 644-1182(503) 679-7370 Cell

Email: [email protected]: www.americanlf.com

Jake HebenstreitFinance Consultant

FIREWOOD PROCESSORSBest Value Portable Log Splitter - Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA - Item ID-12062 - Tom 800-315-9950 x604New 2010 Puma Model 18GM Firewood Processor - Brand New. Can produce up to 2 cords/hour. The 18 GM Firewood processor is the introductory PUMA model. Standard features include a live deck, fold-able stacking conveyor, and a foldaway hitch for easy storage. The 18GM Firewood processor is capable of splitting up

to two cords per hour at the centralized operator station. The 18GM is built with heavy-duty construction, offers a quiet Honda engine, and is perfect for the small start-up operation or weekend warrior. - Item ID-12299 - Tom 800-315-9950 x604

Portable Firewood Processor with Circle Saw - Firewood Processor with a 48” Circle Saw, Powered by a 6cyl Perkins Diesel, 165 hp, 20’ conveyor, Pintle hitch, 6way wedge, It is a heavy-duty machine in ready to work condition. - Item ID-12435

- Michelle 800-315-9950 x603Shop Built Portable Firewood Processor w/48” circle saw - Shop Built Portable Firewood Processor w/48” circle saw, enclosed cab, 3 strand live deck, diesel powered, mounted on 5th


Globe Strip SawKimwood Short Block RipsawMereen-Johnson 48” RipsawPaul Gang RipsawRaimann/Weinig KR450MRipsaw SystemSalem Late Model Combination Edger

FILING ROOM EQUIPMENTArmstrong 3-10C Stretcher RollArmstrong Dual Side GrinderArmstrong No. 4 B.S. Stretcher RollArmstrong No. 4 LH B.S. GrinderArmstrong No. 4 RH B.S. GrinderArmstrong No. 25 CircleArmstrong No. 90 Equalizer Gockel 163” Mag Bed GrinderHanchett DN-40 Knife GrinderHanchett Knife Grinders (10)Hanchett VR120 Mag Bed Newman G-200 GrindersVollmer Cana E (8)Vollmer CH210 Auto Sharpeners (2) Weinig R 934 Profile Grinder Wright Mod. 1801 (3) Wright W-1600 Auto Tipper

HOGS & PULVERIZERSGruendler 50XE Hammer HogJacobson Hammer Mill Jeffrey 36 x 60 ShredderJeffrey 76WBH Horiz. HogWest Salem Big Brute GrinderWilliams 30KS Hammer Hog

MISCELLANEOUS5-Arm Hyd. Tilt Hoist 10’ Hydraulic Lumber StackerCEMCO Combination Planer/Sander Fruilmac End MatcherHurricane 28” Chop Saw Industrial 3496 Finger JointerIndustrial FJS-25 Finger J. System

(866) 241-2977

OVER 13 ACRES OF GREAT BUYS ON USED EQUIPMENT!For complete equipment list, visit our website:

OR CALL AND ASK FOR DEPT. LX

Woods Planers 412M, 414M, 407M, 409M. 415M Woods Moulder 132M

Yates Planers A-20, A-62, A-66 Stetson-Ross Planers 6-12-A1, 6-12-C1, 6-10-A1, 6-14-D1

Mattison Moulders 276, 226, 228SAVE BIG ON MOTORS AND MAJOR PARTS!

New & Used Sawmill & Planing Mill Equipment

9802 North Vancouver Way

Portland, Oregon 97217

WE ARE OVERSTOCKED! PRICES REDUCED!TAKE ADVANTAGE OF THIS CHANCE TO SAVE BIG!

BANDMILLS & HEADRIGSKockums 6’ Air Strain BandmillL&B 6’ Air Strain TwinsMcDonough 62” Twin Air StrainMebor Horizontal BandmillSalem 6’ Air Strain BandmillSalem 5’ Air Strain Bandmill

CARRIAGES & DRIVESCorley 40” Hydraulic 3-BlockSalem 24” 3-Block Linear Carriage Salem 42” 4-Block CarriageSalem 60” 4-Block CarriageSalem Linear 36" 2-BlockTyrone 240 Hydraulic Drive USNR 2000, 42" Stud Carriage

CHIPPERS & SCREENSArasmith Lilly Pad ChipperBM&M 5’X14’ Screen BM&M Chip ClassifierCM&E 36” RechipperCM&E Model 60 Horizontal Feed Kockums 66” Horiz. Feed Precision 8x8 ScreenPrecision 48” 8-Knife Drop F.Precision 48” Horizontal F.Precision 66" Horizontal F.Precision 96” Whole LogPrecision 118” HFBD ChipperRotex 6’X16’ ScreenWest Salem 58” Horizontal Feed

DEBARKERSNicholson 22” A-5 Debarker

EDGERS, GANGS & RIPSAWSGlobe Panel Ripsaw

Irvington 20’ Trimmer, 1’ Saws L&M Log Cut-Off SawsLumber Stackers (2) Peerless 24-Unit Bins (2)Tektronix Log Metal Detector Timesaver Sanders (6)

PALLET EQUIPMENTBronco 2006 Pallet NailerPallet Repair Systems NailerSmetco Pallet Turner

PLANERS & MOULDERSBuss 55 Double SurfacerBuss 88 Double Surfacer CEMCO Planer/Sanders (2)Coastal 16-Knife 9” Planer Pkg. Coastal 24” 20-knife PlanerDiehl 6-head TF MoulderMattison 226 12” MoulderMattison 228 16” MoulderNewman 382 Double SurfacerNewman M712 12-Knife Northfield Double SurfacerS-R 6-14-D1 24” 16-KnifeS-R Chip BlankersS-R 6-10-A1 10-KnifeStetson-Ross Timber SizerWadkin 6-Head MoulderWeining 22A 5-HeadWeinig 22B Complete Line Weinig U22A, 6-head Weinig P22N 5-Head

RESAWS36” Tri-State Tilting ResawKockums 6’ Horiz. Twin Air StrainL&B 6' Setting HorizontalMcDonough 54” Twin HorizontalSalem 5’ Air Strain HorizontalSalem 6’ Horiz. Air Strain Smith Twin Horizontal ResawTurner 52” Rollfeed Resaw


1992 JD 643 Shear Feller BuncherGood Machine, Great Price!Item ID: 12537Contact: Tom Ph: 800-315-9950 x604www.LBXonline.com

‘98 Rotochopper 166 w/Coloring System Item ID: 12428Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

wheel trailer, over had over 100k invested before he pasted away. Family is open to offers on this machine - Item ID-12507 - Daren 800-315-9950 x603

FORKLIFTS1994 Moffett Truck Mount Fork Lift - Very clean machine. Runs well. Owner using now. 2686 Hours. Priced to sell. Great for delivering products or working in warehouse with high reach. This is a bargain! - Item ID-12321 - Tom 800-315-9950 x6042003 Taylor T-180 Fork Lift - 3220 Hours. 18,000 lb capacity. S/N S-C1-23338. Good running condition. Cummins 6BT3.9 engine. Rear axle steer. Front Tires 14:00 x 24 at 60%. Rear tires 10:00 x 20 at 50%. Enclosed ROPS Cab. Two Stage Mast with Hydraulic tilt and side-shift. 6’ Lumber Forks. Priced to sell! - Item ID-12546 - Tom 800-315-9950 x6042004 Moffett Model M5500 Truck Mounted Forklift - 1418 Hours; Kubota Diesel; 4’ Forks, Side shift, 4 Way steer, 12’ Mast,

Tires Front 31.5X13-16.5, Rear 31X15.5-15. If you deliver products on a truck, this forklift goes with you. Top brand in the industry. Priced to sell. - Item ID-12069 - Tom 800-315-9950 x6042006 Taylor T-160 Articulated Fork Truck - 2700 Hours. 16,000 lb capacity. S/N S-A1-17076. Articulated 4-Wheel Drive. Detroit 4-71 engine. 17.5 x 25 Tires at 60%. Enclosed Cab. Two Stage Mast with Hydraulic tilt and side shift. Very nice condition. Priced to sell. - Item ID-12547 - Tom 800-315-9950 x604

HOGS/WOODGRINDERSWest Salem Grinder and Gen Set - Model WSM 2822, With a Cutler Hammer Soft start. There is also a full set of extra hammers that go with it plus one original from factory to use as a pattern when rebuilding the others with hard surfacing. The gen set is a 360 KW with a Big Cam 855 Cummins engine. Extremely low 670 Hours. Owner is negotiable. - Item ID-12386 - Daren 800-315-

9950 x603LOGGING EQUIPMENT

1961 Caterpillar 944 Wheel Loader - Tire, Brakes, Bucket all are in good shape, Machine is Ready to work Serial #43A1589 - Item ID-12156 - Daren 800-315-9950 x6031974 JD 440B Skidder - Very strong skidder. New center pin. New JD Clutch. New Turbo on engine. Pulls extremely well. 18” tires at 40%. - Item ID-12459 - Tom 800-315-9950 x6041976 Clark 664 Cable Skidder - Approximately 7500 hours. S/N 514F-2341-

CAC. Strong Clark Winch; Tire chains; Pulls good. Front tires at 70%. Rears at 30%. Detroit 3-53 runs well. Center pin tight. Slight play in steering pin. Straight metal. Weighs about 18,000 lbs. Can haul on 10 ton trailer. - Item ID-12249 - Tom 800-315-9950 x6041976 JD 440B - MINT CONDITION. WON’T FIND ANY BETTER THAN THIS! just over 3000 hrs. Excellent condition; New u bolts on the center shaft ( less than 6 mo ago); New front hyd pump ( one year ago); Center pins are tight; Does not


12 NOON(MDT) - THURSDAY - JULY 12

MurphyLIVE!

James G. Murphy Inc.1.800.426.3008 - 425.486.1246 - 503.463.4444

murphyauction.com

PUBLIC AUCTION


PUBLIC AUCTION

9am - !ursday - July 26Preview 8-4, Wednesday, July 25

4700 West End Rd, Arcata, CA

MurphyLIVE!

NO MINIMUMS - NO RESERVES

James G. Murphy Co. 1.800.426.3008 - 425.486.1246murphyauction.com


Who’s the Boss? Sawing with a Baker BP Dominator™ Puts You Back In Charge.

Everything works the way you expect it to. ! e BP Dominator equips you to handle even the most trying jobs.

Your Log To Lumber Leader Since 1988

t's no fun being the boss of an operation that won't cooperate. Some-times it can seem like the operation is in charge of you, right? The new Baker BP Dominator™ 20-ft Stationary Band Sawmill

will fully comply with your wishes. The hydraulic controls and heavy duty design puts you back in charge. You sit at your control console and tell it what to do. Every order is followed through with top-notch precision and effi ciency, as the BP Dominator helps you quickly turn logs into high-dollar lumber, bang-bang-bang.

Show your logs who's boss! Invest in the Baker BP Dominator Stationary Band Sawmill.Contact Baker Products today.

t's no fun being the boss of an operation that won't cooperate. Some-times it can seem like the operation is in charge of new

will fully comply with your wishes. The hydraulic controls and heavy duty

Increase production by adding a Baker Stationary Circle Board Edger to your sawmilling operation. Circle Board Edger to your sawmilling operation. Circle Board Edger to your sawmilling operation. Circle Board Edger

will fully comply with your wishes. The hydraulic controls and heavy duty design what to do. Every order is followed through with top-notch precision and effi ciency, as the dollar lumber,

Stationary Band Sawmill

will fully comply with your wishes. The hydraulic controls and heavy duty

backedby parts& SERVICE

Fax: (800) 548-6914

[email protected] www.logtolumber.com

! e Model 3650E Stationary

Electric Baker Band Saw-mill is ! e BP Dominator.

2000 Sterling Road Truck/TractorReduced! Owner must sell!Item ID: 12323Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

‘06 CAT M318 MH Totally Rebuilt! Great Yard Machine!

Item ID: 12520Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

‘04 Timberking TK560 Loader w/CTR450 DelimberItem ID: 12483Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

1983 CAT 988B Loader w/Very Low Hours Item ID: 12375Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com

burn oil; Like new set of bear paw chains on the front; Tires in excellent shape approx. 70 %; Not used for commercial logging, strickly firewood ( pulled tops); Never been repainted or redone, all original; Comes with

complete spare tire and rim; Brand new 100ft of cable on winch line ( less than 2 mo ago); New seat; Clean operator station; Starts really well even when it is very cold. - Item ID-12494 - Tom 800-315-9950 x6041977 (est) JD 540A Cable Skidder - Nice little unit

that still runs well. 28L tires at 35%. JD engine. Hour meter not working. - Item ID-12199 - Tom 800-315-9950 x6041977 Franklin 132XL Forwarder - Nice machine. Runs good. Tires at 50%. - Item ID-12528 - Tom 800-315-9950 x6041978 Clark 666 Grapple Skidder - Strong skidder.

Esco 26 grapple with winch. 28L x 26 tires at 60%. Open ROPS cab. Stick Steering. Detroit 4-53 engine. Runs good. - Item ID-12325 - Tom 800-315-9950 x6041979 JD 440C Cable Skidder - Rebuilt Deere 4 cyl. engine; Manual Transmission, Body- good, open cab w/ ROPS, dozer blade, diff locks, winch with cable; Tires - 16.9


When You Buy Your Circular Saws From B.H. PayneYou’ve Bought the best... We Guarantee It!

Make Sure To Ask For Our Free, Complete Saw CatalogWe Manufacture & Sell Inserted Tooth Headsaws, Solid Tooth Saws, Inserted Tooth Cutoff Saws & Carbide Saws. We also Stock & Sell Bits & Shanks, Carbide Tips, Diamond Wheels, Knife Grinding Wheels, Saw Gumming Wheels & Knives.

Traditional Quality CombinedWith Todays Technology

Call 800 752-0627Quality Brand

Reg. U.S. Pat Off

Circular SawsSaw Bits and Shanks

Circular KnivesCarbide Tipped Saws

Carbide Strobe ® SawsB.H. Payne & Company

Saw Manufacturers

Traditional Quality CombinedWith Todays Technology

Call 800 752-0627

Here’s What You Get With Every B.H. Payne Saw

B.H. Payne & Company, Inc.P.O. Box 90608East Point, GA 30364404 761-8711Fax 404 761-5398

“Since 1890”

E-mail: [email protected] Web Site: www.paynesaws.com

‘07 Liebherr A924B Wheeled Log LoaderGreat Yard Machine!Item ID: 12503Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

TOP QUALITY!

Rayco Stump Grinder RG1665ACItem ID: 12374Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

x 30 4@30%; Hour meter shows 3400. Color - Yellow. VIN #: 440C334150T - Item ID-12091 - Tom 800-315-9950 x6041980 (est) JD 640C Reconditioned Swing Boom Grapple Skidder - Reconditioned John Deere 640C Skidder. Comes with hydraulic tilt decking blade & ESCO Model 212 Swing Boom Grapple - 72” Tongs, 4-way Hydraulic Tilt Blade c/w Brush Rake attachment, 23.1 x 26 Tires at 70%, Rear Wheel Skidder Tire Chain. #54. COMES WITH 30 DAY LIMITED WARRANTY. FOB: BC, CANADA - Item ID-12550 - Tom 800-315-9950 x6041981 Dresser 510B - Dresser 510B Pay Loader, meter shows 8571 hours. Had a new Komatsu engine installed 3000 hours ago. Starts and runs great, tires are 85%. Comes with forks, owner also has bucket. - Item ID-12359 - Michelle 800-315-9950 x6031981 Hydro Ax 411B w/Koehring 16” Hot Saw - Strong Cummins 6BT 150HP engine with no

blow by. 23.1 x 26 tires at 75%. Koehring Hot Saw has fresh teeth and runs well. Very nice machine for the price. - Item ID-12538 - Tom 800-315-9950 x6041983 Caterpillar 988B Loader with very low hours - Hours 5228, Caterpillar 3408T Engine, s/n# 50W06423 T246 988B, It has a Rayco Bucket that is 11’6” wide x 5’ tall (8 yard bucket). - Item ID-12375 - Daren 800-315-9950 x6031984 John Deere 640D Cable Skidder - NEW TRANSMISSION; John Deere 6cyl Diesel Engine; 30.5 x 32 tires at 70%. Great flotation. Winch works well; Runs good. VIN #: 640DC513656 NC - Item ID-12092 - Tom 800-315-9950 x6041988 Timberjack 450B Dual Arch Grapple Skidder w/winch - 2045 hours, 23.1 tires front 40% and rears are 50%+/-, Pins are tight, Machine is ready to WORK!! - Item ID-12512 - Michelle 800-315-9950 x6031989 Clark 666 Dual arch grapple skidder - The machine has a new


“BUILT-RITE”

11 HPWS- 68 HP Diesel- Full Length Logs- Triple-Multi Wedge- 3.5 Second Cycle- Hourglass Rollers

- 46 HP Diesel- 16”x22’ Logs (Opt. 20” x 22’ Logs)- Multi Wedge- Live Deck

Give Your Customers the

Wood they Want with the

BUILT-RITE PATENTED

“MULTI-WEDGE” SYSTEM

2008 Prentice 2432 Dual Arch SkidderItem ID: 12536Contact: Tom800.315.9950 Ext. 604www.LBXonline.com

CAT Dozer D4E w/WinchItem ID: 12369Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

‘76 JD 440B SkidderItem ID: 12494Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com

Shop Built Portable Firewood Processorw/48” Circle SawItem ID: 12507Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

cummins 5.9l engine with less than 300 hrs on it. A new grapple with around 50hrs, 2 new interstate batteries and a new starter on it. It fires right up even in the winter. This machine is ready to work!!! - Item ID-12219 - Daren 800-315-9950 x6031990 Volvo Grapple Truck - 1990 GMC Volvo WG64 tandem axle grapple crane truck. The GVW is 56000. Cummins diesel, horsepower 270. 9 speed manual transmission with spring suspension. No odometer only a hour meter. Hour meter reads 21965. The crane model number is BAR803-C S/N 18615. It has a 20’ reach. Has a steel bed and has a front GAWR of 16,000 and a rear or 44,000 with floatation steers. It has

good tires and runs good, - Item ID-12495 - Tom 800-315-9950 x6041991 John Deere 548D Grapple Skidder - 1991 John Deere 548D Grapple Skidder with winch, machine is tight and ready to work - Item ID-12208 - Daren 800-315-9950 x6031992 Ardco Swamp Trencher - Model H-150. SN:1522. Only 2200 HRS. Very Good Condition. DETROIT 6V71 with 310HP; Eaton heavy duty Hydrostatic Hydraulic Pumps and Motors = Sunstrand Hydraulic Drive = Funk double pump, 2800 series. Three Point Hitch for implement attachment Ditcher is a Dondi model 55 or 75. Enclosed cab with good working AC. Tires = 66 x 68:00 x 25 - 6 ply Super Wide Flotation

Tires at 98%. This machine only offered by Lumberman’s. Fantastic buy if you need to work in wet ground. Used to help drain swamps or work in other soft ground conditions. This machine almost walks on water! Service records and books available from owner. FOB: GA. - Item ID-12312 - Tom 800-315-9950 x6041992 John Deere 643 feller buncher - Complete rebuild & paint less than 1000 hrs ago. New 28 L tires under 300 hrs. Brand new ice chains are included. All pins are tight, cylinders are dry. Strong hydraulics & hydrostats. Strong 6.8 L turbo diesel, 175 hp, no

smoke or blow by. Many new parts & hoses. Has some minor hydraulic leaks & minor slop in the accumulator arm. Great brakes. E -brake needs adjusting, back up alarm doesnt work. No heat or a/c. Has a 20” shear head. - Item ID-12285 - Chris 800.315.9950 x6001992 John Deere 643 Shear Feller Buncher - Complete rebuild & paint less than 1000 hrs ago. New 28 L tires under 300 hrs. Brand new ice chains are included. All pins are tight, cylinders are dry. Strong hydraulics & hydrostatic transmission. Strong John Deere 6.8 L turbo diesel, 175 hp, no smoke or blow by. Many


2003 CAT 950 Loader w/Log ForksRuns Great!!Item ID: 12544Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

2004 CAT 525B Grapple Skidder Item ID: 12424Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

new parts & hoses. Great brakes. No heat or a/c. Has a 20” shear head. - Item ID-12537 - Tom 800-315-9950 x6041992 Peerless Drop Center Chip Trailer - One (1) Peerless Drop Center - Open Top - Chip Trailer 1992 Model - Serial#: 1PLE04426NPC80940 Model 44 - DC X 96” - Top Henge Rear Gate - Spring Suspension - Reyco. 11R24.5 Tires - Steel Disc Wheels - Good Floor 50 - 70% Tires - Except 2 that are 40% 50% Brakes. - Item ID-12341 - Tom 800-315-9950 x6041993 Prentice 210 Loader on Trailer - Very clean unit. Works well. Cummins engine. 9355 hours. Bar Saw hydraulics. Heat and AC. Some cosmetic dents. Great value. - Item ID-12289 - Tom 800-315-9950

x6041994 Husky 235XL Loader Package - Hour meter broken. OT Delimber Trailer; CTR 314 Cradle Delimber; Bar Slasher; Heat and AC work; Strong Loader; JD 160HP Engine. - Item ID-12445 - Tom 800-315-9950 x6041994 JD 640E Cable Skidder - Just over 10,000 hours; 23.1 x 26 Tires at 70%; Chains NOT included: Many updates-New Hydraulic Pump (6 months old), Rear end redone (3 Months ago); Hydraulic Control Block-New Seals (3 Months ago); Rebuilt Water pump (3 months ago). Unit running today. - Item ID-12500 - Tom 800-315-9950 x6041994 Timbco 425 Feller Buncher with Bar Saw Head - 9,142 Hours; 28in. Saw head; B Cummins

Engine; Accumulator; Tracks need rails and sprockets; No leaks; Runs well; Ready to go and work. - Item ID-12417 - Tom 800-315-9950 x6041995 Bell Super T - Dangle Head bar Saw. 28L Tires at 60%. Engine has issues and does not run. All components are there. Parts machine, or one

to fix up and use. Priced cheap! Serial Number BCH3660 - Item ID-12470 - Tom 800-315-9950 x6041995 Caterpillar 518C Grapple Skidder - 1995 518C Caterpillar log skidder. This machine is clean and is ready to go to work. Over $12,000 worth of work has been done to this


Multitek Firewood ProcessorsIncrease Your Productivity and Profitability

Made in the U.S.A.

1977 Peterbuilt 357 Log Truck & TrailerItem ID: 12562Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

Caterpillar 225LC Shear Excavator Item ID: 12517Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com

machine(All workorders can be e-mailed). All belly pans and sheet metal were removed for steam cleaning. We have rebuilt the hinge pins and the steering pins. We changed the front and rear seals in the transmission, and the pinion seals

in both differentials. The radiator has been repaired. It has new fan belts and hoses. The steering valve, grapple valve, and brake valves were rebuilt. All cylinders have been repacked. The Lufkin winch has been rebuilt with new clutch packs. Installed new door latches. Doors open and

close good. All fluids and filters have been changed. The tires are 28L- 26 in size and the tread will average about 99 percent. Machine has been sanded and painted. The engine cranks up instantly and the transmission shifts good - Item ID-12302 - Daren 800-315-9950 x6031995 JD 290D with Hytec 4700 Harvester Head - 290D in good condition. Engine just overhauled. Undercarriage at 50%. Cab has heat and air with stereo and all run well. Head recently updated and does great job in hardwood with stroker extension that shoots out at tough limbs. Priced to sell! - Item ID-12206 - Tom 800-315-9950 x6041995 Morbark Wolverine 3 wheeled with Shear head - 5351 hours, Drive tires

are 90%, Machine is ready to Work. - Item ID-12516 - Michelle 800-315-9950 x6031995 Morbark Wolverine 3-Wheeled Feller Buncher - S/N 4073. Only 1000 hours on new JD 4 cylinder engine. Recently replaced turbo. 23.1 tires at 50%. 16” Rapid Buncher shear head. Machine is fast and in very good condition. - Item ID-12531 - Tom 800-315-9950 x6041995 Timbco 445 with Quadco hotsaw - 1995 Timbco 445, approx. 9000 hours, New track Drive Motor, Cylinders just packed, Cummins engine, u/c 60%, this machine is in the woods daily - Item ID-12388 - Daren 800-315-9950 x6031995 Valmet 503 w/Koehring 16” Saw Head - Totally rebuilt. New


REAL TUFF BALER&BAGGERTM

Phone: (325) 641-8300 Fax: (325) 643-3243Manufactured by M & F Gauge & Specialty Co., Inc.

www.realtuffbaler.com

$15,905

BUILT TO LASTReal Tuff Baler Dimensions & Specifications

using a two spool valve

starter not included

ponents are used

Effective May 1, 2012

2002 Tigercat 635 Bogey Grapple SkidderItem ID: 12558Contact: Tom800.315.9950 Ext. 604www.LBXonline.com

West Salem Grinder & Gen Set WSM 2822Item ID: 12386Contact: Daren800.315.9950 Ext. 603

www.LBXonline.comEngine. New Disc. New glass in cab. AC blows cold. Can spin the tires! Owner painted for improved image on jobs. Selling now due to larger timber and needs bigger machine. Must see to appreciate. - Item ID-12545 - Tom 800-315-9950 x6041996 511EX Hydro-Ax With Bunching Saw Head - Hours est at 6800. Only 200 hours on factory reconditioned hydraulic motors and pumps. Comfort cab with working air. 28L tires with chains at 50%. Saw head has side pocket for cutting larger trees. Very well maintained machine. - Item ID-12072 - Tom 800-315-9950 x6041996 Hood 20000 Loader w/Delimber & Circle Saw Slasher - Hour meter shows 1650 hours on rebuilt engine. Slasher and delimber run good. 30’ boom. Overall good condition. - Item ID-12433 - Tom 800-315-9950 x6041996 JD770BH Motor Grader - 7720 Hours; s/n DW770BH557633. 12’ Blade; JD 6076 Engine. Very well maintained. Runs strong. Excellent

price. - Item ID-12313 - Tom 800-315-9950 x6041996 Timberjack 610 Forwarder - Good running unit. Needs Brakes. All else works well. About 12000 hours.23.1X26 tires at 40%; 23.1X26 tires 70% Joystick controls; Manual transmission; Cummins Engine - Item ID-12521 - Tom 800-315-9950 x6041997 Barko 160C Knuckleboom Loader on Trailer - Nice loader. Cummins 6 Cyl engine. 8400 hours. Pitts trailer. Standard lever controls. Rotobec 4642 continuous grapple. - Item ID-12229 - Tom 800-315-9950 x6041997 IH 4000 Truck with Prentice Loader - 6 Cyl. Diesel engine; 26000 GVW. Used as yard machine. Loader runs and lift good. - Item ID-12261 - Tom 800-315-9950 x6041997 Timbco 455EXL Feller Buncher w/Hot Saw - Decent machine running today. Approx. 12,800 hours. Undercarriage at 50%. Quadco 22” High Speed Disc Saw. Running today. Nice Price. - Item ID-12532 - Tom 800-315-9950 x604


To find the nearest dealer call:

(888) 820-3962


Call Marvin Miller for a quote 231-924-5953 (fax) 231-924-6166 11606 Brickyard Rd. Holton, MI 49425

We also offer expert Sharpening Services, plus…

Gang Edger ScraggTrim Split Strob

…and just about any Custom Saws you

need to keep you cutting longer…

for less!

Welded to your lengths!

BANDSAW BLADESWe have the most popular sizes in stock & ready to

ship from major manufacturers, including…

(2) ‘86 JD 648 Grapple SkiddersItem ID: 12560Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

2008 Mack CHU 633w/Lowboy TrailerItem ID: 12535Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com

Precision 58” Chip PackItem ID: 12233Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

‘05 Hydro-Ax 670 w/22” Sawhead Item ID: 12481Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

1997 Volvo A25C Articulated Dump Truck - Very good machine with 10,000 hours and one owner. $16,000 of recent service and maintenance by local Volvo Dealer. 6 x 6 all wheel drive capacity. Super Value! - Item ID-12444 - Tom 800-315-9950 x6041998 650g Full Forestry Package - approx. 3000 hours, works excellent 2010 complete under carriage new chains pads and sprockets winch and machine works excellent all pins and bushing all tight replaced main blade bushing replaced all blade cylinders Janurary 2011 Selling because no longer needed for my operation. - Item ID-12488 - Daren 800-315-9950 x603

1998 CAT 525 Grapple Skidder - 9600 hours on well maintained machine. 34 x 25” Tires at 50%. Single Arch Esco Grapple and Winch all work well. Center section tight. Cat engine runs well. - Item ID-12429 - Tom 800-315-9950 x6041998 JD TC54H w/Logging Forks - Very well maintained machine. 13,000 hours. Maintained by John Deere. Machine used for personal only. Never on saw mill. Tires are 28L x 26 at 85%. Runs good. - Item ID-12467 - Tom 800-315-9950 x6041998 Model DM Mack Log Truck - 300 HP Mack Engine; 330,000 miles; 7 Speed Transmission, 46K Rear, 20K Front, Tri -Axle, 22.5 Tires, Like New

Log Bed, Truck is in very good condition! Plumbed to take pup trailer. Very well maintained. - Item ID-12493 - Tom 800-315-9950 x6041998 Tigercat 240 Tracked Loader - 9550 Hours. 32’ Reach. Rotobec continuous grapple. Strong Machine. Works well. New Cummins 6BT engine in last 500 hours. Cab riser for high stacking. Clean cab with AC. - Item ID-12242 - Tom 800-315-9950 x6041998 Valmet 603 3-Wheeled Buncher - 6500 hours on total machine but no hours on 4BT3.9 Reman Cummins Engine. Equipped with 18” Waratah High Speed Disc Saw. 28L x 26 Tires at 40% complete with chains.

This machine has been extremely well maintained and runs very well. Hard to find them in this good of condition. Has a twin that is available if you need two units. - Item ID-12524 - Tom 800-315-9950 x6041998 Valmet 603 3-Wheeled Buncher - Good running machine with about 6620 hours. Owner maintains his equipment to the highest degree and it shows. Complete with Waratah High Speed Disc Saw Head. 28L x 26 Tires with chains at 90%. Just installed new Reman Cummins 4BT3.9 Engine. - Item ID-12525 - Tom 800-315-9950 x6041998 Valmet 911.1 Harvester - Single Owner machine. Super Clean


Highest Production

Lowest Maintenance

GUARANTEED!!!

Trailer: Tandem axle, 8’6” wide, 22’-30’ long, 11’8” high, 5-7 tons, Electric brakes.

Saw: Superior Carbide Slasher - Cut wood instead of sharpen chains 36” to 60” diameter, 2 ga Carbide Slasher.

Engine: 50 to170 HP or PTO Drive with user’s tractor.

Hydraulics: Commercial Shearing

Splitter: 35 - 72 tons, 3-5 second cycle time; 2, 4, 6, 8, 10, 12, 14 & 21 way pkg wedge. Capacity - 4” to 27” Log diameter 0” to 48” Block Length Lifetime warranty on the entire splitter chamber.

Infeed Conveyor: 16” - 30” long Hydraulic powered.

Clean out Hopper: Get rid of bark and wood slivers before being conveyed away.

2040 ROGERS ROAD,PERTH ,ONTAR IO K7H 1P9CANADA

www.cord-master.comEmail : [email protected]

NEWGRAPPLESYSTEMNow Available!

Today!888-219-9663


2010 Prentice 2670 w/Single Post Saw HeadItem ID: 12552Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

Williams 200hp Hammermill Grinder 350 HogItem ID: 12011Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

and ready to go to work. 10,200 hours. All regular maintenance done consistently. Tires at 75%. Sisu Engine uses less than 4 gal/hr. Slide Boom design easy to learn and operate. - Item ID-12338 - Tom 800-315-9950 x6041999 BELL TF120B Feller Bunchers - one owner machine, it is on D5 cat tracks, Hours not known; meter not working. Price : 60,000.00 USD - Item ID-11480 - Daren 800-315-9950 x6031999 Hyundai 280 w/Denharco 3500 Stroker - Good running unit. Priced to sell. Approx 9800 hours. Could use some updates, but great value. - Item ID-12455 - Tom 800-315-9950 x6041999 Mack DM 600 Truck with Prentice 120 - The DM 600 GK has a Mack 235 HP Engine; 44,000 mack rear ends with a gear ratio of 4:64; Mack 6 speed T20 transmission. Hour meter shows 4000 hours. Runs good. Strong Prentice 120E Loader with 25’ reach and continuous rotation grapple. - Item ID-12448 - Tom 800-315-9950 x6041999 Timbco 820

Forwarder - Good running condition. Tires at 80%. 5000 hours. Bunks included. Also had Clam Bunk Grapple Option included. Nice package. - Item ID-12454 - Tom 800-315-9950 x6041999 Timberjack 735 Shovel Logger - Ugly but very good machine. Bank Repo. Has sat idle due to court settlement and now can be sold free and clear. 75% undercarriage. Runs well. Low hours. GREAT PRICE! - Item ID-12311 - Tom 800-315-9950 x6042000 Cat 550 Harvester w/Log Max 840 Head - Very nice harvester with 6500 hours on machine, but only 3500 on 1997 Log Max 840 Processing Head. Cat 3126 engine w/180HP. Tires and Chains at 75%. Unit comes with spare squirt boom and many spare parts for processing head. s/n available on request. - Item ID-12349 - Tom 800-315-9950 x6042000 JD 1270 Harvester - 1270C; s/n 01GE0004; Hours unknown...estimated 7500; Cummins 218 HP Engine; Hydrostatic Transmission; Tires and wheels 700MM; John Deere 762C

Processing Head; Boom 28’ 2”; Weight = 36,045 lbs.; Ground pressure 6.7 front 6.0 back; Overall Height 11’ 11” Length 23’6” Width 9’4”. Very Motivated Seller. FOB: Alaska - Item ID-12477 - Tom 800-315-9950 x6042000 Peterbilt Sleeper Truck - Good running condition. Priced to sell. - Item ID-12492 - Tom 800-315-9950 x604

2000 Peterbuilt Logging Truck - 2000 Peterbuilt, N-14Cummins engine, 18spd., 120 Prentice loader, pup trailer. - Item ID-12159 - Michelle 800-315-9950 x6032000 Sterling Road Truck/Tractor - Truck has 259 k miles, a N-14 Cummins 370+ engine, 9 spd. trans. 4:10 rears with 4 air bag tandem axle, 24.5 rubber almost new. Runs Great!


VFD CONTROL

ALL SIZES OF MOTORS

MANUAL TRANSFER

SWITCH

MOTOR CONTROL STARTERS(Solid State)

DISCONNECTSWITCH

AUTOMATICREDUCED VOLTAGE

STARTER

COMBINATIONSTARTER

Reconditioned Electrical Equipment

Saves You Money, Big Money!

We Buy, Sell, or Rent— Used, Obsolete and Hard to Find Industrial Electrical Equipment

Many ItemsIn Stock Ready for

Immediate Shipment!

When you need it NOW—And at the BEST Price!

YOU NEED WEAVER ELECTRIC

CALL TODAY!Toll Free 800-257-0038

Web: www.weaverelec.comEmail: [email protected]

2007 Tigercat 250 w/2011 Log Max 7000XTItem ID: 12366Contact: Tom Ph: 800-315-9950 x604www.LBXonline.com

‘09 Risley Eclipse R300 MulcherLike New: 600 hrs!Item ID: 12534Contact: Tom800.315.9950 Ext. 604www.LBXonline.com

Includes wet line kit on truck. FOB: NC - Item ID-12323 - Tom 800-315-9950 x6042001 Precision 23/66 Whole Tree Chipper - One Owner: S/N 3310. Cat 3412E engine with 750HP s/n 4CR01701. New Injectors. Includes air compressor. Oil changed every 250 hours. 10,500 hours and runs like new. 3 axle trailer, California legal, rubber at 85%, and good brakes. Tows smooth. Equipped with Husky 175 loader. Has 3 knife disc with key knife system installed. Makes a super clean chip. Cab has heat and AC working well. Also has stereo radio and CB. New glass in loader. External chute controls. Super Clean! - Item ID-12526 - Tom 800-315-9950 x604

2001 Quadco 22B Hot Saw with Low Mounted Arms - High Torque Single Pinion Wrist; All Cylinders Rebuilt; Saw Disc Re-Centered to 1 3/8” thick, $3500.00 Value; New Beaver teeth; Saw Motor Rebuilt, new shaft and Adapter Spline; Drive shaft bearing surfaces re-chromed to new spec, New Bearings & Seals; All Cracks Repaired; New Paint. - Item ID-12471 - Tom 800-315-9950 x6042001 Timbco 445D w/Quadco 2800 Saw - Only 4050 hours on this gem! Extremely well maintained. Very Good Condition. Undercarriage at 80%. 360 rotation on head. New 12 tooth disc on saw. Ready to work. - Item ID-12486 - Tom 800-315-9950 x6042001 Timberjack/Deere

840 FB - Total hours = 8700. 75 hours on Rebuilt Engine. Machine is tight and dry. New Oil Cooler. Joy Stick Steering. 34” Tires at 70%. JD 22” Saw Head is tight and runs well. Very clean unit and a great price. - Item ID-12410 - Tom 800-315-9950 x6042002 Daewoo 290LL Log Loader - Located in MI. Daewoo 290LL, Pierce Pacific Log Loader Package, Elevated Cab, High Walker, Forestry Protected Cab and all logging guarded, Pierce Boom, Dry Chemical Fire Suppression System, Good Undercarriage, Butt n Top grapple. 2002 Year model, 19000 hours, but well maintained, updated, and upgraded. Runs very well. Man engine package lasts 40,000 hours. FOB: MI - Item ID-12480 - Tom 800-315-9950 x6042002 Franklin 185 Cable Skidder - Very clean machine with about 7800 hours. Cummins Power. One owner. Well maintained. Tires at 80%. - Item ID-12451 - Tom 800-315-9950 x6042002 John Deere 648GIII Dual Function Grapple Skidder - 9700 total hours,

3000 on Reman. engine, Reman. transmission 6000 hrs. 30.5x32 tires at 60%. MAchine is working daily. - Item ID-12231 - Daren 800-315-9950 x6032002 New Holland TV140 w/10’ Brush Cutter - Only 3000 hours. Very well maintained. Brush Cutter has less than 500 hours. Complete with winch and forestry package. Tires at 80%. Comfort cab with great visibility. Extremely productive and stingy on fuel. - Item ID-12414 - Tom 800-315-9950 x6042002 Timbco 445D w/22” Quadco Hot Saw - Only 2400 hours on Upper which was replaced after burning at 2000 hours. Total hours on lower undercarriage is 4400 and has been rebuilt. 70% life left on lower. Customer has rebuilt the engine with a new cylinder head, pistons, rings,bearings,gaskets, and fuel transfer pump with only 700 hrs. on rebuild.. Unit has a new saw disc on the 22” Quadco Hot saw with 360 degree wrist... Main boom to stick boom pin and bushings have been replaced in a the last 3

*Price in U.S. dollars and subject to change without notice.©2012 Wood-Mizer Products, Inc. All rights reserved.Visit us on Facebook: facebook.com/woodmizer

800.553.0182 SawLumber.com

BESTDEAL ON WHEELS!LT15GO

LOADED &UNDER $9,000,

INCLUDES FREE POWER FEED!

NEWMILL FOR 2012

LT35 MANUALFREE LOG DECK

PACKAGE!

SAVE UP TO $2,555CALL FOR DETAILS

LT40 SUPER

HYDRAULICSUPER SAWING

EXPERIENCE!

Summer Savings Event

800.553.0182

ALL 50 states in 2012.

Proof’s in The Performance

HURRY! LAST CHANCE OFFER ENDS JULY 31

SUMMER SAVINGS EVENT

Now, Three Ways to Make

Your Day More Profitable

WOODBINE FIREWOOD PROCESSORS

PERFORMANCE POWER PROFIT

50' slasher saw with 8-way wedge.Take on huge yields with a reasonable pricepoint.

$54,900

Smaller, but just as powerful.4 Cords/hr. up to 16" diameter wood.

$46,900

1

3

Let us show you the Woodbine way........$67,900

MADE IN USA


FAX TO: 800-248-4479 419-244-8887 419-248-4479

[email protected]

Yates American PlanerItem ID: 12556Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

1988 Jackson Shaving MillVery good condition!!

Item ID: 12555Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

months and saw pump was installed about a year ago. THIS IS ONE OF THE CLEANEST 2002 MODELS YOU WILL FIND AT THIS PRICE! - Item ID-12541 - Tom 800-315-9950 x6042002 Timberjack 608s with hot saw - approx. 6000 hours, Machine is in very good shape and has been well maintained. - Item ID-12194 - Daren 800-315-9950 x6032002 Vermeer Horizonal Grinder Model HG365 - Cummins Engine, 365 HP, 20” capacity, New belt, New teeth, New floor plates - Item ID-12372 - Daren 800-315-9950 x6032003 CAT 330 Log Loader - 13,750 hrs. new u/c less rolls nice tight and clean log loader. Located near Portland OR; 38’ Live Heel boom; Forestry package on cab. 40” cab riser with tilt for transport. AC/Heat work good. Very nice yard machine. - Item ID-12478 - Tom 800-315-9950 x6042003 Cat 950 Loader w/ Log Forks - 1500 hours on new engine. Very good condition. Total hours 7350. Priced to sell. - Item ID-12544 - Tom 800-315-9950 x604

2003 Franklin 185 Cable Skidder - 7600 Hours; Very good condition; Cummins Power; Enclosed Cab with working heat and air; Tires at 80%. S/N18562 - Item ID-12447 - Tom 800-315-9950 x6042003 Franklin Q70 Grapple Skidder - Model Q70-M31A,Enclosed Cab W/Heat & A/C,28Lx26 Tires 85% Rear,70% Front, 100 Hours On Dealer Rebuilt Transmission, 600 Hours On Cummins Recon Engine 6BTA 200 H.P. Winch and Grapple. Excellent one owner machine! - Item ID-12337 - Tom 800-315-9950 x6042003 Franklin Q80 Grapple Skidder - 7500 hours, but just 5000 hours on reman engine. New Radiator; New Hydraulic Pump; Comfort cab with good working heat and air; Tires at 80%. - Item ID-12450 - Tom 800-315-9950 x6042003 TimberPro Model TS 620 Six-Wheeled Grapple Skidder - 4990 hours, Cummins motor, 6WD. Has 400 hours on rebuilt engine, New ECM; New drive pump; New tires. Excellent condition; Great

Value. Perfect for long hauls or handling big loads. Rear bogey tracks included. - Item ID-12254 - Tom 800-315-9950 x6042004 72” CSI R72 Circle Saw - Year model 2004, hydraulic. 20’ deck. Sold without the blade. New blade is additional $3500.00. Was over $40,000.00 new, 2 years ago. machine needs a new blade, 1500 hrs, it was used to cut logs Price : 17,000.00 USD - Item ID-12125 - Michelle 800-315-9950 x603

2004 Barko 375A Loader on Rough Terrain Carrier - Mounted on rough terrain carrier. 40’ boom, hydraulic tilt cab, engine covers are hyd raised & lowered. 7209 hours. Rotobec continuous grapple. Very nice machine. - Item ID-12380 - Tom 800-315-9950 x6042004 Barko 395 on SP Carrier - Very Clean Machine. 8800 hours. Mounted on Big John Self Propelled Carrier. JD 6.9 Powertech Engine. Rotobec 4547 Grapple.


Sell Your WOOD – $300/cord or More!Double or triple your profits by shrink wrapping wastewood - fore-wood with WOOD-PAKer! Attractive various size packages can be obtained with our high production, easily operated and affordable machines. Eight machines available. The ideal equipment for produc-ing square bundles-palletizable for ease in storage and transporting. Inquire for free details. Video and Package samples at nominal fee.

B & B Manufacturing

SHRINK WRAP FIREWOOD/WASTEWOOD

Timberjack 450B Single Arch Grapple Skidderw/Winch

Item ID: 12511Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com

1999 Timbco 820 ForwarderRuns well!!Item ID: 12454Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

35’ Reach with heel bar. Comfort Cab with Heat/AC/Stereo. Nice yard machine. - Item ID-12278 - Tom 800-315-9950 x6042004 CAT 525B Grapple Skidder PRICED TO SELL FAST!!!! - 8,538 hours, Caterpillar 3126 Engine, Powershift transmission, 30.5L-32 Tires (3 Poor, 1 Like New), More photos available, Machine is in southeast - Item ID-12424 - Daren 800-315-9950 x6032004 Hood 28000 Loader with hotsaw - 72” hot saw; has 8000 hours. - Item ID-11418 - Michelle 800-315-9950 x6032004 Hydro-Ax 570 Feller Buncher - 9405 Hours. S/N HA18599. Cummins 205HP Engine. Hydrostatic drive. Hydro-Ax bunching saw head with side cut feature. New 30.5 x 32 tires. New engine 2500 hours ago.

New Gear Box 2500 hours ago. New saw disc. Runs well. Ready to go. - Item ID-12316 - Tom 800-315-9950 x6042004 JD 843H Feller Buncher w/JD 22” Hot Saw - Very clean machine. Model 843H; Year 2004; S/N WC843HX882337; Condition Good; Hours 3,267; Engine JD 6.8 liter; Tires 28L-26 14 ply 50%; Chains on front tires; Enclosed cab with heat and air; JD Hot saw head 22”; All functions work. No leaks. ONE OWNER. WELL MAINTAINED. - Item ID-12466 - Tom 800-315-9950 x6042004 Prentice 384 TMS Loader Package - 11,145 Hours; CTR 450 Delimber; Recon John Deere engine with less than 200 hours. Runs good. Working on job today. Good condition.

TN - Item ID-12171 - Tom 800-315-9950 x6042004 Tigercat 724D Feller Buncher - Only 2800 CONFIRMED hours. One owner who is a construction contractor that only used this machine on occasion. New engine installed in 2010. Tigercat 22” Hot Saw. Shows 44” tires, but will be equipped with 30.5 x 32 tires at 75%. - Item ID-12496 - Tom 800-315-9950 x6042004 Timberking TK560 Loader with CTR450 Delimber - 7200 hours, new knives in delimber, very tight and dry machine. WOODS READY!! - Item ID-12483 - Daren 800-315-9950 x6032005 Hydro Ax 670 with 22in Saw head - 7200hours, 22inch high capacity bunching head,

New Cummins engine, 1 new firestone tire other 3 at 40%, Tires are 30.5 - Item ID-12481 - Daren 800-315-9950 x6032005 Prentice 280 TMS - Good running machine. Hour meter shows less than 5000 hours but owner believes it to have about 7800. Machine serial number is PR59771. Unit has Cummins engine and runs good with no blow-by and has no leaks and is tight Dependable machine that is priced right with the market. - Item ID-12527 - Tom 800-315-9950 x6042005 Prentice 384 with Saw Hookups - 10123


‘88 Timberjack 450B Dual Arch Grapple Skidderw/Winch


www.LBXonline.com

(2) ‘98 Valmet 603 3-Wheeled Buncher

Condition!Item ID: 12525Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

Hours, 2nd owner, This machine is in very good condition and is ready to work!!! - Item ID-12396 - Daren 800-315-9950 x6032005 Takeuchi Supertrack Skid Steer with B74 Fecon Head - 981 Hours. 102 HP Engine. New Tracks. Fecon B74 Mulching head with new teeth. Winch. Comes with spare 80” bucket. Half the price of new. - Item ID-12413 - Tom 800-315-9950 x6042005 Valmet 860.1 8-Wheeled Forwarder - 11,800 hours. New hydraulic transmission and gear box. Spare pump ($7,000 value) Good running condition. Sisu engine uses 4 gal/hour. 16 ton capacity. Tracks for front and back. Front blade. Hood guard. - Item ID-12267 - Tom 800-315-

9950 x6042005 Valmet/Timbco 415 Harvester with 370E Head - Very nice unit. 7400 hours. 370E Harvesting head just added 22 months ago and only has 2000 hours. 36” Triple Grouser tracks at 60%. Sisu engine that is very stingy on fuel. 8’ squirt at end of boom for 30’ reach. Reversible fan and auxiliary oil cooler. - Item ID-12266 - Tom 800-315-9950 x6042005 Volvo L90E Wheel Loader w Forks & Bkt - 7561 Hours on this very nice woodyard loader. Volvo 119HP engine is stingy on gas. Includes 106” bucket for loading chips or waste. 20.5R25 tires at 80%. Comfortable cab with AC & Heat. Ready to load today. - Item ID-

12404 - Tom 800-315-9950 x6042005 Waratah 622 Proc. Head with Top Saw - Good condition and well maintained. Needs minor maintenance and new monitor, but priced to

allow for that. Complete with computer and some spare parts. Chain size is .404 top and 3/4 bottom. No drive motors have been replaced. All working well. One cylinder leaking slightly. He is original


“Providing a full range of industrial metal detectors since 1965.”

MDI PROBE 2100PORTABLE INDUSTRIAL METAL DETECTORSIMPLE TO OPERATE – just turn on and go!MDI’S SUPERIOR DIGITAL TECHNOLOGY will detect an 8d nail buried 15" into a log!

with adjustable sensitivity control

eliminates mineral interference from logs or round for maximum detection depths

indicates signal strength and battery level

allows precision pinpointing of tramp metal

www.metaldetectorsinc.com

2000 Pinheiro MoulderItem ID: 12554Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

‘94 Husky 235XL Loader PackageRuns Good! Priced Right!Item ID: 12445Contact: Tom800.315.9950 Ext. 604www.LBXonline.com

owner. Machine received Waratah updates by Waratah about 2 years ago. New knives. There is a pilot filter but not an inline filter - Item ID-12420 - Tom 800-315-9950 x6042006 Barko 595 CRL Loader - 40’ Live Heel for high stacking. 8555 well maintained hours. JD 6068T engine. Rotobec 4048HD Grapple. Undercarriage at 60%. Hyd tilt cab. Work ready! Good condition. - Item ID-12405 - Tom 800-315-9950 x6042006 Cat M318 MH - Totally refurbished with 30 day warranty. Gone through from end to end by professional rebuild factory. Hydraulic elevated cab for great visibility. 38’ reach. Logging grapple included. Fantastic Yard Machine. FOB: Baltimore - Item ID-

12520 - Tom 800-315-9950 x6042006 GT25 Gyro Trac - Refurbished undercarriage at 80% with new tracks and new set of cutter teeth, this machine is work-ready. 773 hours on Cummins 230HP diesel, overall good condition. Pressurized cab, winch, ROPS. - Item ID-12268 - Tom 800-315-9950 x6042006 Hydro Ax 321 FB w/Koehring 16” Saw - Good running unit with less than 6000 hours. 23.1 tires at 40%. Koehring 16” Saw Head runs good. JD Engine. Chains for 23” Tires. Hard to find units like this. Great value. - Item ID-12551 - Tom 800-315-9950 x6042006 JD 310 Loader/Backhoe - 1762 Hours. Very nice condition. Extenda-Hoe. 4 wheel

drive. Runs good. - Item ID-12464 - Tom 800-315-9950 x6042006 JD 540GIII Cable Skidder - Only 1800 hours. Bought with 575 hours in 2009 and used sparingly in hardwood application. 23.1 Tirees at 80%. AM/FM Radio with Heater in cab. Removable glass for summer. Great condition. - Item ID-12411 - Tom 800-315-9950 x6042006 JD 748GIII Dual Arch Skidder - Approx 8400 hours; Very well maintained; 30.5 tires at 40%; Sweda axles; Winch. Unit working everyday. - Item ID-12117 - Tom 800-315-9950 x6042006 John Deere 748GIII Dual Arch Skidder - 8900 hours. Good condition. Working today. One owner machine. Tight and dry. 32.5 tires at 50%. - Item ID-12542 - Tom 800-315-9950 x6042006 Lamtrac LTR7230 with New FAE 175 mulching head - Only 522 demo hours, this machine still carries a warranty from the MFG. Equipped with Cummins C8.3 - 230HP. FAE Head is Brand

New and has ZERO hours! It replaces the head in the photo. Weight is 26,000 lbs giving it a very light 4.42PSI ground pressure. Superior traction and stability through Lamtrac’s unique quad track/double articulated platform. Priced well below dealer cost. This is a bargain from the manufacturer that won’t be seen again. See more at www.lamtrac.com. - Item ID-12353 - Tom 800-315-9950 x6042006 Log Lift 115Z Foldable Self Loader - Never mounted. This loader is the highest quality on the market. Includes Stainless Steel Cab that hydraulically raises 5 feet; Two Section knuckle boom with squirt extension for total of 32’...Longest Reach in it’s class. Lift capacity of 2000 lbs at full reach. Unique foldable ‘Z’ design allows loader to fold up and store totally behind the cab or between trailer and pup without resting boom in front of truck or on load. Out & Down outriggers give maximum stability. Log Lift Loader


SKIDDER TIRES

TRUCK TIRES

(800) 537-2042

ASK ABOUT FREE DELIVERY

‘95 Morbark Wolverine 3-Wheeledw/16” Shear HeadItem ID: 12516Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

‘09 JD 437C Loader w/DelimberItem ID: 12523Contact: Tom800.315.9950 Ext. 604www.LBXonline.com

also weighs 20% less than other loaders in it’s class. Piston pumps give smooth fast cycle times. Cab is heated and has joystick controls. A/C can be added. This is the best you can buy in a self loader. - Item ID-12356 - Tom 800-315-9950 x6042006 Peerless Open Top Chip Trailer - One (1) Peerless Straight Floor - Open Top - Chip Trailer 2006 Year Model - Serial#: 1PLE045206 PJ54716 Model 45 CST - Top Henge Rear Gate 11R 24.5 Tires - Steel Disc Wheels - Good Floor Spring Suspension - Reyco 50% Tires - New Brakes - Item ID-12342 - Tom 800-315-9950 x6042006 Talbert 25T Trailer - Model 25XPL Tri-Axle. 25 ton capacity with 25’ Floor with 6’ Dove. ABS. Tires at 70%. Very Good Condition. - Item ID-12416 - Tom 800-315-9950 x6042006 Tigercat 726E Feller Buncher - Unit has 6900 hours but new meter was recently installed at 6180 hours and only shows 716 hours. Owner has documentation to show true hours of 6900. Has 34” tires at 65%. Equipped

with Tigercat 5702 felling head. Machine in very good condition and is ready to work. Unit is tight and dry with plenty of power. - Item ID-12529 - Tom 800-315-9950 x6042006 Valmet 603 w/Hot Saw - 5600 hours on very nice machine. Cummins 4BT3.9 engine runs well. 28L x 26 tires at 45%. New Saw Motor. AC and Stereo both working. Uses about 4.5 gal/hour. Great thinning machine. Low cost to operate. These types of machines are hard to find! - Item ID-12539 - Tom 800-315-9950 x6042007 Case 1150K Dozer - 2565 Hours on very strong dozer. Case 130HP engine. Open ROPS cab. 24” pads; Rock Guards; Canopy Brush Guard; Hydraulic PTO; Runs strong and priced to sell. - Item ID-12348 - Tom 800-315-9950 x6042007 Cat 325D w 624 Waratah Processing Head - 7800 hours. Very clean machine. Head updated. Unit is working today. 34” Triple Grouser Pads. Great landing machine. - Item ID-12283 - Tom 800-315-9950

x6042007 John Deere 335C Loader - 2000 hrs, comes with a NEW CTR Reversable Bucksaw. - Item ID-12234 - Daren 800-315-9950 x6032007 Kenworth W900B Log Truck w/Loader - Only 129,000 miles. Great condition. C-15 Cat engine with 18 speed transmission. New Tires. 24’ bed. Chalmers Axles, 20K Front; 46K Rear. Hubler Brothers Loader installation of Prentice 2124 includes headache rack oil cooler. 2011 Pitts Pup Trailer adds $10,000. - Item ID-12412 - Tom 800-315-9950 x6042007 Liebherr A924B Wheeled Log Loader - 10,100 hours. Very Good Condition. Liebherr makes the highest quality heavy equipment in the world.

This unit can go another 20,000 hours. 44’ reach with over 7000 lb capacity at 40’. Hydraulic raising cab for 16’ 8” operator eye level. Front blade for pushing or cleaning road debris. Grapple NOT included. Travels up to 12.5 mph with variable speed hydraulic transmission. Super smooth hydraulics make this a great wood yard machine. - Item ID-12503 - Tom 800-315-9950 x6042007 Rayco C-87-L Crawler Mulcher - Only 2500 hours. Very Good Condition. Runs well. Deutz 87 HP engine - Oil Cooled. Steel Tracks w/ 14” Pads. 6 track rollers. 1 carrier roller. Enclosed ROPS Cab with working Heat and Air. Attachment is Gyro Tract Model Toma Axe GT500 Planer Knife


PIPER’SSaw Shop

Promotional Pricing OfferSimonds Red Streak Hard Back

$14.27 eachTell us you saw it here!

Limited

Time

Only$14.71 each

2003 Taylor T-180 ForkliftItem ID: 12546Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

1981 Dresser 510BItem ID: 12359Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

Cutter. Works Great! S/N 794429. - Item ID-12548 - Tom 800-315-9950 x6042007 Tigercat 234 Loader w/Slasher - Very clean unit with just 4600 hours. Powerful with Cummins 173HP engine. 32’ Reach. Tigercat continuous rotation grapple. CSI DL4400R reversible sawbuck. Mounted on Pitts trailer. Comfort cab with AC/Heat/Stereo and Satellite Ready. Less than half the price of new and

in excellent condition. - Item ID-12347 - Tom 800-315-9950 x6042007 Tigercat 250 w/2011 Log Max 7000XT - 7500 hours on Tigercat. 700 hours on new 2011 Log Max 7000XT head. New pump for head. 36” Triple Grouser pads on 60% undercarriage. Cummins 6 cyl engine. Smooth and powerful machine. Log Max head can do multi-stem delimbing (see photos). Owner closing

down job. Below market price. - Item ID-12366 - Tom 800-315-9950 x6042007 Tigercat 630C Skidder - Very clean unit. S/N on request. Tires at 60%. 6519 hours. Big capacity grapple. Tight and ready to work. One owner machine. - Item ID-12275 - Tom 800-315-9950 x6042008 Lamtrac Model 8290 Quad with FAE 300-U Head - Only 1200 Hours on this amazing land clearing

machine. Super light foot print allows this machine to go where no other can and climb where no other machine dares! Cummings 290 HP provides maximum power to the head for best performance in its’ class. Very low ground pressure of 3.97 PSI. Weighs 36,000 lbs. Operator comfort is second to none. Safe and easy to maintain. This unit is priced well below wholesale. See www.lamtrac.com for videos and specifications. - Item ID-12354 - Tom 800-315-9950 x6042008 Mack CHU 633 w/Low Boy Trailer - 2008 Mack CHU 633 has 150k miles on it. Vin is 1M1AN07Y98N001230. Also has a 2010 Kaufman trailer FR50DT in excellent


SAWMILL EXCHANGENorth America's Largest Source

of Used Portable Sawmills.

Over 800 Ads:

and Much More!!

The Place to Sell Your Equipment

800-459-2148 www.sawmillexchange.com

1980 (est) JD 640C RECON Swing Boom Grapple SkidderRebuilt! Hard to Find!Item ID: 12550Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

2006 Taylor T-160 Articulated Fork Truck (Unique!)Item ID: 12547Contact: Tom Ph: 800-315-9950 x604www.LBXonline.com

condition. Fantastic value. - Item ID-12535 - Tom 800-315-9950 x6042008 Morbark 3800 Wood Hog - Just refurbished at factory. Customer has invested $Thousands in upgrades to make ready for sale. Super Clean machine! Only 3064 hours. Very well maintained. S/N 189-1033. JD 600 HP Tier 3 Engine. Remote control. Mag End Pulley. Hydraulic Fan. Break away mounts. PT Tec Wet Clutch. 3” Hex Screens. - Item ID-12277 - Tom 800-315-9950 x6042008 NEW Lamtrac Model 8290Q Mulcher/Right of Way Clearing Machine - New 2008 w/15 demo hours and FULL FACTORY WARRANTY. Cummins QSC 8.3 Tier III - 290HP; Rexroth Hydraulics; Berco undercarriage; Weight - 36,000 lbs (with head); 3.7psi ground pressure ROPS/FOPS/OPS certified cab with premium comfort package. Its ingenious four track, double articulated design enhances maneuverability while maximizing traction. Goes ANYWHERE! Best in class! TX - Item ID-12146 - Tom 800-315-9950 x604

2008 Prentice 2432 Dual Arch Skidder - Very good condition. 2800 Hours. 30.5 x 32 Tires at 60%. Working today. Machine is tight and dry. No blow by in Cummins engine. Dual Arch Grapple. Comfort Cab with AC/Heat/Stereo. - Item ID-12536 - Tom 800-315-9950 x6042008 Valmet 890.3 20 Ton Forwarder - 7200 Hours. Good Condition. 8-wheeled with Eco Tracks for all bogeys. Best Price on Market! New Hydrostatic Transmission just installed with full factory warranty. Customer ready to sell. Tires at 50%. Sisu Engine uses about 4 GPH! Front Blade. Hood Guard. One owner machine who took great care. - Item ID-12263 - Tom 800-315-9950 x604CBI Grinder Model Magnum Force 6400T. Weight: 80,750 lbs. Cat C27 engine w/1050 HP. 1850 hours; 1 1/2” x 2” screen. 95% U/C. Customer has the feeder belt. Very good condition! - Item ID-12422 - Tom 800-315-9950 x6042009 JD 437C Loader with Delimber - Super Clean

unit with only 3119 hours. Complete with CSI 264 Delimber. Comfort Cab with AC/Heat/Stereo. Joystick controls. JD 180HP engine. Kodiak Trailer. Very clean and runs well. - Item ID-12523 - Tom 800-315-9950 x6042009 John Deere 843J Feller Buncher - 1800 hours. Very clean machine in excellent condition. Customer lost job. 30.5 x 32 Tires at 90%. JD Hot Saw. Comfort Cab with Head/Air/Stereo. - Item ID-12490 - Tom 800-315-9950 x6042009 Risley Eclipse R300 Mulcher - Well maintained machine with only 585 hours. Owner downsizing operation. All components in excellent condition. Tracks at 90%. Risley Mulching Head

cuts 102” wide. Weighs 30,400 lbs without head. POWER: Cummins™ QSL 9 litre Tier 3, 300hp @ 2100 rpm (BULGE 325HP

volt 2-12 volt batteries

FlexXairE™ Fan system (auto/man-reversing, VARIABLE PIT CH) POWER

ion – Dual-path closed loop hydrostatic (Sauer-

Drive – Lohman GFT -40 with Rexroth motors

– High Press ure/full flow filtration TRACK

28” wide, single grouser (STEEL ) Pads (Traction


mfg

Carriage Linear & Set ShaftLewis Controls “Electronics for sawmills by sawmillers”

The Most Complete Line of Sawmill Machinery Since 1905!

More Production & Profit is Only One Call AwayFor Parts, Service & Sales

Call (423) 698-0284

(8 Models)

WE NOW HAVEModels toChoose From

DVDs Available

Over 20 years in Business

88 ‘06 Hydro Ax 321 FB w/Koehring 16” SawItem ID: 12551Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

Morgan 4-Head ResawItem ID: 12553Contact: Daren800.315.9950 Ext. 603

www.LBXonline.coming supported with high strength pins - Item ID-12534 - Tom 800-315-9950 x6042009 Tigercat 720E Feller Buncher - 5239 Hours on this well maintained machine. Equipped with Tigercat 5603 bunching head with new carbide teeth. 24.5 x 32 tires at 75%. Cummins engine runs strong with no blow by. Machine is tight and dry. Ready to work today - Item ID-12530 - Tom 800-315-9950 x6042010 Bandit 2400 Tracked Disc Chipper - 1433 Hours. 700HP. Very clean unit to make paper quality chips. Tracks allow this chipper to work right of ways or pipelines. Excellent condition. Super value. - Item ID-12501 - Tom 800-315-9950 x6042010 JD 648H Grapple Skidders - LOW HRs. - 2300 hours. Owner lost his job. 30.5 x 32 tires at 95%. Dual Arch Grapple. Save $80,000 off new. Super Clean! - Item ID-12473 - Tom 800-315-9950 x6042010 JD 748H Grapple Skidder - Like New Condition. 2100 hours.

30.5 x 32 Tires at 80%. Loaded. Customer lost contract. Save big over new machine purchase. - Item ID-12282 - Tom 800-315-9950 x6042010 Prentice 2670 w/Bunching Head - ONLY 1504 Hours. Excellent Condition. 34” Tires at 80%. One Owner. You will not find units like this on the market very often! - Item ID-12452 - Tom 800-315-9950 x6042010 Prentice 2670 w/Single Post Saw Head. - Only 3199 hours. Cummins engine. 30.5 x 32 tires at 40%. Single post saw head. Great Value! - Item ID-12552 - Tom 800-315-9950 x6042010 Valmet 860.4 Forwarder - Incredible opportunity if you are looking for a new forwarder! Only 722 hours. MFG warranty still applies. This machine is LOADED including the WEBASTO programmable pre-heater! Includes 2 sets of Eco Tracks; Blade, and Hood Guard. Owner changing jobs and no longer needs this


‘88 MORBARK 27 RXL WHOLE TREE CHIPPERItem ID: 12519Contact: DarenPh: 800-315-9950 x603

www.LBXonline.com

MOTIVATED SELLER

Firewood Processor w/Circle SawItem ID: 12435Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

machine. Save $50,000 off of new machine! - Item ID-12351 - Tom 800-315-9950 x6042011 JD Model 748H Dual Arch Skidder - 30.5 x 32 Tires. 600 Hours. Job shut down after buying skidder new in Jan. Save 10% off new and pay no sales tax! - Item ID-12262 - Tom 800-315-9950 x6042011 Morbark 5500 Flail Debarker/Delimber - Cat C15 engine w/600HP. Only 912 hours. 3 Flail design. Gross weight 68,060 lbs. Like new! Excellent condtion - Item ID-12423 - Tom 800-315-9950 x6042011 ‘NEW’ GN Roy Model 2252C Hot Saw - Brand new 22” capacity hot

saw. Never mounted. 360 rotation, planetary drive in the wrist. Bent axial motor to run the planetary. They also us a 63 series Rexroth motor to turn the saw, same as Quadco, Koehring/JD, Cat etc. Includes new boom adapter & pins to match the machine. Save $25,000 off new price. - Item ID-12472 - Tom 800-315-9950 x6042011 Pitts Pup Trailer - Excellent condition. Tires

at 80% Stakes straight. Photos say it all. - Item ID-12415 - Tom 800-315-9950 x6042011 Reconditioned KMC Tracked Grapple Skidder - Model #42 KMC Model 2500P (Dual Arch Grapple) Track Skidder. Cummins 6BTA (174 HP). - Clark 28000 Series Powershift Transmission. John Deere Model 40 Winch (40,000 lb line pull). Hydraulic operated controlled Steering Differential.

Planetary Final Drives. - ESCO Dual Arch Grapple. - Fully enclosed Hi-Vis Cab c/w Heater, Air Conditioning, Lights, Swivel Suspension seat c/w Joystick Controls. - Pilot operated closed center Hydraulics. Sundstrand Sauer 45 Series Pump: - DanFoss Model L90LS 5 spool control valve - New. KMC Wear Resistant Tracks & Sprockets . Torsion Bar suspension. Heavy Duty


COMPLETE SAWMILL FOR SALE

2007 Rayco C87-L Crawler MulcherItem ID: 12548Contact: Tom800.315.9950 Ext. 604www.LBXonline.com

Call Michelle (800) 315-9950 x606

For start-up or equipment replacement. An awesome deal for all equipment and

Includes all equipment shown and the following equipment without photos:

(may be sold separately

300 gal. Fuel Tank 400 gal. Fuel Tank Banding Tools 5/8 Banding

Fax Machine w/phone/fax separator

Cast Steel KMC Road/Idler Wheels. Standard Decking Blade. FOB: BC, Canada INCLUDES ONE YEAR LIMITED WARRANTY!! - Item ID-12549 - Tom 800-315-9950 x60440’ Finch tri-axle Log Trailer - 18 bunks, tires are road ready, everything works on the trailer. - Item ID-12505 - Daren 800-315-9950 x60345’ Tri-axle Log Trailer with Prentice 120 loader - 9 bunks, brakes and tires are road ready. - Item ID-12506 - Daren 800-315-9950 x603Cat 518 Grapple/winch Skidder - Late 80’s 4WD Drive; Cat winch,

maintained machine.; 30.5 x 32 Tires, 95% rubber. 130-hp, all pins are good. - Item ID-12202 - Daren 800-315-9950 x603Caterpillar 225LC Shear Excavator - 4226 hours, Undecarriage is in GOOD Condition, Machine is WOODS ready. - Item ID-12517 - Michelle 800-315-9950 x603Caterpillar Dozer Model D4E with winch - 3304 caterpillar engine, power shift, 50,000 lb winch - Item ID-12369 - Daren 800-315-9950 x603Caterpillar Excavator Model 235 - 1239 hours, 3306 Caterpillar engine, hydraulic thumb - Item ID-

12371 - Daren 800-315-9950 x603Clark 664D Cable Skidder - 5 cylinder 88hp deutz engine, newly rebuilt transmission, new head gaskets, new injectors, new mainline. - Item ID-12221 - Daren 800-315-9950 x603Euclid Dump Truck Model R-13 - Hours 3960, Engine Detroit Diesel - Item ID-12373 - Daren 800-315-9950 x603Franklin Skidder - 2003,Model Q70-M31A, Enclosed Cab W/Heat & A/C,28Lx26 Tires 85% Rear,70% Front, 100 Hours On Dealer Rebuilt Transmission,

600 Hours On Cummins Recon Engine 6BTA 200 H.P. Excellent one owner machine! - Item ID-12152 - Chris 800-315-9950 x600Franklin Skidder Model 142 - Hours 7230, Good strong machine, 453 Detroit Power unit - Item ID-12376 - Daren 800-315-9950 x603Franklin Skidder Model 170PT - New tires, New cable ,Hours 6585 - Item ID-12377 - Daren 800-315-9950 x603Haybuster IG-10 Tub Grinder - This 8-ft. tub is powered by a 275 hp CAT engine. This portable tub grinder has 48 swinging hammers and a set of 1” screens. Unit also has new clutch and belts, and the hammers are in good shape. It was being used to grind green waste but can also be used for processing many types of wood waste. With a pintle hitch for mobility, this machine is ready to be pulled to your site today and put to work. - Item ID-12361 - Michelle 800-315-9950 x603Iron Mule 4500 - Complete Overhauled Engine, Barko 40 Loader w/By Pass Bucket, Tires Like New -


Made in the USA

Nothing Eats Wood Like a Beaver

FEATURES:1 to 2 plus full cords per hour (128 cubic feet)Cuts up to 16” diameter and up to 20’ lengthsSplits wood from 12” to 24” lengthsSplitter cycle time 4.5 secondsPTO drivenHonda Engine GX-630 630cc

Call Toll Free1-800-569-6813

www.woodbeaver.net | [email protected]

Beaver Model 16THE FIREWOOD FACTORY COMING

SOONNew Models4

Safe

Durable

Reliable Convenient

$8995Optional Features Availale

Starting at

2011 Recon KMC Tracked Grapple SkidderLimited 1 Year WarrantyItem ID: 12549Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

Lincoln 3-Phase 100hp Electric MotorItem ID: 12436Contact: Daren800.315.9950 Ext. 603

www.LBXonline.comFranklin Skidder 142Item ID: 12376Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

‘06 Tigercat 726E Feller BuncherItem ID: 12529Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

45’ Tri-axle Log Trailer w/ Prentice 120 LoaderItem ID: 12506Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

Item ID-12365 - Michelle 800-315-9950 x603Morgan 4 head Resaw - 3 phase 480V, belt driven, running daily. - Item ID-12553 - Daren 800-315-9950 x603Prentice 210D - 1995, Model 210D Mounted On A Prentice Articulated Self Propelled Carrier, S/N 210P52736, Prentice C742 Grapple, Lever Controls, 6059 Deere Engine. Working daily,good dependable machine. - Item ID-12174 - Chris 800-315-9950 x600Rayco Stump Grinder Model RG1665AC - New teeth - Item ID-12374 - Daren 800-315-9950 x603Timberjack 450B single arch grapple skidder

w/winch - Timberjack 450B single arch grapple skidder w/winch, 1409 hours, tires are at 50% +/-, Center pins are tight, Ready for the WOODS!! - Item ID-12511 - Michelle 800-315-9950 x603WANTED: USED 3-Wheeled Feller Bunchers - Lumberman’s has many customers who are looking for good used 3 wheeled bunchers like Valmet, Hydro-Ax, Bell, or Franklin. If you have an old but good running machine you need to sell, give Tom a call at 800-315-9950 Ext. 604 to get your

top dollar! - Item ID-12502 - Tom 800-315-9950 x604Wanted: USED Cat 518C Series Skidders - We have customers looking for CAT Model 518C Skidders in running condition. Grapple or Cable. Contact Tom. Will need serial numbers and photos. - Item ID-12432 - Tom 800-315-9950 x604WANTED: Used Clark F Series Skidders - If you have an older Clark F Series Cable or Grapple Skidder that you would

like to sell, please call to discuss. We have customers looking. Year models are from around 1986 to 19995. - Item ID-12151 - Tom 800-315-9950 x604

MOULDERS2000 Pinheiro Moulder Planer - approx. 100 hours, 3 phase 480V, Used for Log siding. - Item ID-12554 - Daren 800-315-9950 x603

PALLET MACHINERY2005 Bronco Model 2006 Pallet Nailing System -


Why?Why?We use only the highest quality nickel alloy steel NEW state of the art CNC milling centers for perfect pocket geometry

100 + years of combined hammering and manufacturing experience

Proudly made in the USAStock to 10 days on standard sizesNations largest distributor/manufacturer of saws and knives

www.usblades.net

CALL 800-862-4544Locations in

Hampden, ME Meridian, MS Florence, SC West Monroe, LA

Pallet nailing system with roll-out. Was used to build 48”x40”. New in 2005. One owner. - Item ID-12108 - Daren 800-315-9950 x603Smart Bandsaw Dismantler - 64” table. Two-man operation. Less than 100 hours on a complete rebuild. Powered by a 15-hp 3-phase motor. Push button table height adjustment. 400-700 pallets per 8 hour shift. Manufactured by Smart Products. - Item ID-11066 - Michelle 800-315-9950 x603Williams 200 H.P. Hammermill Grinder - This 200 H.P. hammermill was recently removed from a sawmill where it was being used to grind wood waste to boiler fuel for several large industrial customers. This grinder has a very large capacity and would work well in the grinding of whole pallets because it has a top opening size of 27” X 52”. This grinder is powered by a 200 H.P. electric motor that operates at 1200 RPM and uses 460 voltage for its power. The electric motor is direct coupled to the grinder through a shear coupler to prevent damage from being done to the grinder. This machine is equipped with a bar type screen that determines the size material the machine is going to produce. Of course this screen can be changed to achieve many different size materials being produced from the same machine. This machine comes with a size # 6 motor starter and 600 amp breaker which are enclosed in a large free standing electrical cabinet. This is a very nice clean unit and would work ideally for many grinding applications. - Item ID-12011 - Daren 800-315-9950 x603

PLANERSYates American Planer - Yates American Planer, model# 820-12, infeed deck, duct work to main line included, pineapple roller feed, currently up and running - Item ID-12556 - Daren 800-315-9950 x603

RECYCLING EQUIPMENT2003 Morbark 7600 - 3200 hours on a Cummins 12-cylinder engine, 1000 horsepower, ran daily, magnetic end pulley, wireless remote, 5X5, 8X8 screens, Twin Disc clutch, tight clutch, new mill rods, balanced mill, new lights, 85%-95% tires, very good value for a horizontal grinder this size! - Item ID-11830 - Michelle 800-315-9950 x6031987 Morbark 27 WCL NEEDS MOTOR - Morbark 1000 Knuckle boom loader, 3 knife disc, Newer discharge chute, New banding around disc, Brakes and tires are also OK, Everything works well Newer clutch -- with outboard bearing, Had Cummins KTTA 750 HP engine -- needs repower - Item ID-12443 - Daren 800-315-9950 x6031988 Morbark 27 RXL Whole Tree Chipper -


HEAVY DUTY FORKSAT BIG SAVINGS

LET US QUOTE YOUR

BAY EQUIPMENT CO. / (616) 392-1811

Above forks have capacities from 12,000 lbs. to 30,000 lbs. per pair.

Also, 4”, 5”, 6” thick forks to 168” long.

48” Precision Chip Pack


www.LBXonline.com

‘01 Precision 23/66 Whole Tree ChipperItem ID: 12526Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

Morbark 1000 loader, Cummins Engine, This Machine is ready to work!!!! - Item ID-12519 - Michelle 800-315-9950 x6031993 Morbark Model 20 Tracked Chipper - Just over 8000 hours. Very solid and compact machine in good condition and ready to work. Compact for the size. Has loader so unit is totally self contained. Tracks at 60%. Great value for a tracked chipper. - Item ID-12339 - Tom 800-315-9950 x604

1998 Rotochopper 166 with Coloring system - less than 1000 hours on rebuilt Cat 3406 engine, 460hp, 2 sets of screens 2” and 4”, 2 types of hitches pintle and 5th wheel. This machine is priced well under its market value. - Item ID-12428 - Daren 800-315-9950 x6031999 CBI Model 4800 Grinder - 1680 Hours: Twin Disc Clutch; Flex reversible fan, Remote control, Weight 93,000 lbs., Tires 445/65R22.5, New teeth, Updated hammers, Full engine service just completed; Cat 3412 engine w/12 cylinders; Ready to go to work; Very good condition - Item ID-12047 - Tom 800-315-9950 x6041999 CBI Model 4800 Grinder - 1680 Hours: Twin Disc Clutch; Flex reversible fan, Remote

control, Weight 93,000 lbs., Tires 445/65R22.5, New teeth, Updated hammers, Full engine service just completed; Cat 3412 engine w/12 cylinders; Ready to go to work; Very good condition - Item ID-12047 - Tom 800-315-9950 x6042000 Morbark 22RXL Chiphavester - The infeed area has been beefed up with T-1 steel for more strength and longer life with less weight. Enclosed weatherized operator’s cab tilts hydraulically for transport . Overall Length 38” Transport height 13’ 6” Width 10” 6” Weight 70000 lbs. Chipping capacity 22” diameter 750 hp 3412 CAT engine, M1000 loader - Item ID-12397 - Daren 800-315-9950 x6032001 Precision 23/66 Whole Tree Chipper -

One Owner: S/N 3310. Cat 3412E engine with 750HP s/n 4CR01701. New Injectors. Includes air compressor. Oil changed every 250 hours. 10,500 hours and runs like new. 3 axle trailer, California legal, rubber at 85%, and good brakes. Tows smooth. Equipped with Husky 175 loader. Has 3 knife disc with key knife system installed. Makes a super clean chip. Cab has heat and AC working well. Also has stereo radio and CB. New glass in loader. External chute controls. Super Clean! - Item ID-12526 - Tom 800-315-9950 x6042002 Vermeer Horizonal Grinder Model HG365 - Cummins Engine, 365 HP, 20” capacity, New belt, New teeth, New floor plates - Item ID-12372 - Daren 800-315-9950 x603


‘90 Prentice 210C Log Loader & 421 CTR SlasherItem ID: 12487Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

40’ Finch Tri-axle Log TrailerItem ID: 12505Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

‘97 Timberjack 460 Grapple SkidderItem ID: 12564Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

1997 Prentice 210E TMS Pkg.Item ID: 12563Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

2003 MORBARK 1300 WCL TUB GRINDER - 1280 Hours, Morlift 400 loader with rotobec grapple, Cat 3412 engine, 860Hp, Twin Disc trans w dry clutch and driveline breakaway coupler. Air compressor. Cab is extra clean. Includes all manuals in cab - Item ID-12401 - Daren 800-315-9950 x6032003 MORBARK 1300 WCL TUB GRINDER - 1280 Hours, Morlift 400 loader with rotobec grapple, Cat 3412 engine, 860Hp, Twin Disc trans w dry clutch and driveline breakaway coupler. Air compressor. Cab is extra clean. Includes all manuals in cab - Item ID-12401 - Daren

800-315-9950 x6032006 GT25 Gyro Trac - Refurbished undercarriage at 80% with new tracks and new set of cutter teeth, this machine is work-ready. 773 hours on Cummins 230HP diesel, overall good condition. Pressurized cab, winch, ROPS. - Item ID-12268 - Tom 800-315-9950 x6042007 Morbark 22 RXL 1000HP Chipper - 8000 hrs. Cummins 1000 HP Engine runs strong. Just replaced feed tray, end spout, belly liners, hood liners, and one pump. Machine overall is in very good condition. S/N 2043. DISCHARGE SYSTEM: Dirt separator

with deflector Hydraulic swivel/telescoping discharge spout. CHIPPER: 22” diameter chipping capacity, 75” diameter four-knife chipper disc with LH rotation Chip sizes: 5/8”, 3/4”, 7/8”, 1”, 1-1/4”, 2”. Hydraulic chipper hood for easy knife access. 30” x 10’ CAT chain infeed bed. Enclosed weatherized operator’s cab is mounted on rubber shock absorbers with combination air conditioner/heater. Tilts hydraulically for transport. Six-way adjustable seat and joystick controls. Morbark 1000 knuckleboom loader,

25’ reach, 210º swing and by-pass grapple. Lift capacity of 20,000 lbs. at 10’. OPTIONS: reversing fan, twin disc clutch; Electronic RPM sensor with automatic back feed; 11 hp quincy air compressor; pre lube on engine while starting. - Item ID-12449 - Tom 800-315-9950 x6042008 Morbark 3800 Wood Hog - Just refurbished at factory. Customer has invested $Thousands in upgrades to make ready for sale. Super Clean machine! Only 3064 hours. Very well maintained. S/N 189-1033. JD 600 HP Tier 3 Engine. Remote control. Mag End Pulley. Hydraulic Fan. Break away mounts. PT Tec Wet Clutch. 3” Hex Screens. - Item ID-12277 - Tom 800-315-9950 x6042009 CBI Grinder Model Magnum Force 6400T - Weight: 80,750 lbs. Cat C27 engine w/1050 HP. 1850 hours; 1 1/2” x 2” screen. 95% U/C. Customer has the feeder belt. Very good condition! - Item ID-12422 - Tom 800-315-9950 x6042011 Morbark 40 x 36 Drum Chipper - 2400 hours on this well maintained chipper. 600 HP John Deere engine


All purpose, durable blade for most sawing applications.

Copyright 2012, Wood-Mizer Products, Inc.

800.522.5760 woodmizerblades.com

PROF

ILE GROUND TOOTH

2002 Timbco 445D w/22" Quadco Hot Saw - Low Price; Low Hours!Item ID: 12541 Contact: Daren 800.315.9950 x603

www.LBXonline.com

with 10 year warranty. Excellent Condition. Chip prices have dropped so owner is selling. Great price! - Item ID-12540 - Tom 800-315-9950 x604Haybuster IG-10 Tub Grinder - This 8-ft. tub is powered by a 275 hp CAT engine. This portable tub grinder has 48 swinging hammers and a set of 1” screens. Unit also has new clutch and belts, and the hammers are in good shape. It was being used to grind green waste but can also be used for processing many types of wood waste. With a pintle hitch for mobility, this machine is ready to be pulled to your site today and put to work. - Item ID-12361 - Michelle 800-315-9950 x603

ROLLING STOCK1983 Mack Cruiseliner w/tail mount 1986 Hood 7000 Series loader - Mack E6-350, 800k+ miles, 9 speed Fuller trans, 20k lb.front axle w/ floats, 44k lb. rears. New in last 2 years – windshield, paint, front rims, tires, batteries, reman transmission, conversion to S-cam brake assemblies on front axle, rear brake shoes, air compressor, air dryer, rear suspension w/ trunion, buckets, bushings, truss

rods and frame rail, front grille, cab jack pump, recent clutch adjustment, fluids changed and more. Rubber at 75 percent, some minor leaks. Parts truck available. Hood 7000 loader w/ 22-foot boom, butt grapple and 11k# lift capacity @ 10 feet. New in last 2 years – main boom cylinder, left grapple cylinder, rod ends in right grapple and jib boom cylinders, all other cylinders repacked and/or rebuilt as needed, external filter assembly, valve sections and spools, most swivels and hard/soft lines. Some minor leaks. will take offers! - Item ID-11796 - Michelle 800-315-9950 x603

SAWMILL1992 Sanborn sawmill Mini-Max - 36” x 20’ log capacity, 40 HP diesel engine, hydraulic power unit, uses 6” wide saw blades, includes (10) saws. This machine has a log cleaner ahead of the saw mounted on sawmill. - Item ID-12196 - Daren 800-315-9950 x6031998 Meadows #1 Portable Sawmill - Excellent Condition and a complete package: 50 series Detroit power unit; Fully automatic; Cab a/c; Live deck 30 ft; 1 live off

bearer belt; 1 set rolls 2 1/2’ x 30’; (1) 300 gallon air tank; (1) 500 gallon fuel tank; 2 sawdust sweeps; Meadows edger w/ John Deere power unit; Recent updates and minor repairs; Works and runs good w/ lots of extra features. GREAT VALUE! - Item ID-12461 - Tom 800-315-9950 x6042001 Timber Harvester Grade Resaw System - Capacity 12”x12”x16’, 28” dia all-steel band wheels, 30 HP electric motor, 1-1/2” blade package, Powered rollers, Pop-up cross-over chains, Board seperator, Off-line kicker-type turner, Push button setworks, Seperate hydraulic power pack for feed works - Item ID-12190 - Daren 800-315-9950 x6032008 Challenger Grinder Model CHSP 200-4090 - Like New Condition. Only

315 hours. 120HP, 3-phase electric motor. 2 sets of screens, 3/4 and 1”. Photos say it all. Machine runs great. Owner lost contract. This machine makes great animal bedding. - Item ID-12284 - Tom 800-315-9950 x604

SHAVING EQUIPMENT1988 Jackson Shaving Mill - Model 1-13137-D-30, Hydraulic moving box, 50hp motor running heads, 2 heads 4 knives per head with cartridge blades, bottom discharge conveyor, 3 phase 480V. - Item ID-12555 - Daren 800-315-9950 x6032009 Salsco 30 in. Shaving Mill - 1255 Hours, 4 Sets Of Knives, 8 ft. Blower Pipe Extention, C4,4TA Cat Engine, Original Owner, Excellent Condition, Can See Running! - Item ID-12182 - Chris 800-315-9950 x600

THE LUMBERMAN’S EXCHANGE PRSRT STD.U.S. Postage

PAIDPermit No. 212

Pulaski, TN

Documents

LBX Online Magazine