www.larus.pt | +351 234 520 600

The Axis bench was developed with an ergonomic seating line. Its seating surface is of Tali, wood of high density. It is protected with a non toxic varnish and attached to a support leg which is fixed to the ground and made of Euronorm cast iron 1561:19997, metallized and painted. The resistant axial leg allows us to obtain a simple design, of easy integration in historical or contemporary, urban or rural environments. The other elements of this line follow the same principle of depurated forms.

Axis linedesign Pedro Martins Pereira | Larus

Furniture

500 | 1800 | 2500 | 3000 608

445

1800 700 700

710

1800 | 2500 | 3000 500 652

445

1385

528

445

1165

120

565

500|1000

Bench without backrest

Chair

Table

Bench with backrest | doble

BenchesLegs: BS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in forge enamel (LR EF1) Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).

TableBody: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).

Paper Bin Body: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in forge enamel (LR EF1). Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Container: Rotomoulded plastic with DOWLEX NG 2432.10NE (LR R1) polyethylene resin. Lock: triangular key in AISI 316 (LR R1) stainless steel. Capacity: 11L.Fixings: fixed directly to the ground by lead solder (LR F3).

Foundations to be carried out by the client according to technical information made available

Paper Bin Bench with backrest wall Mounting