Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
Permanent Facility
1 CHEMICAL- BUILDINGMATERIAL
Admixture Ash content IS 9103 1999 RA :2013
2 CHEMICAL- BUILDINGMATERIAL
Admixture Chloride IS 6925-1973 RA: 2013
3 CHEMICAL- BUILDINGMATERIAL
Admixture Dry Material Content IS 9103 1999 RA :2013
4 CHEMICAL- BUILDINGMATERIAL
Admixture pH IS 9103 1999 RA: 2013
5 CHEMICAL- BUILDINGMATERIAL
Admixture Relative density IS 9103 1999 RA: 2013
6 CHEMICAL- BUILDINGMATERIAL
Bitumen/ Emulsion Solubility in Trichloroethylene IS 8887 : 2017
7 CHEMICAL- BUILDINGMATERIAL
Cement OPC, PPC Alumina IS 4032 1985 RA :2019
8 CHEMICAL- BUILDINGMATERIAL
Cement OPC, PPC Calcium Oxide IS 4032-1985 RA :2019
9 CHEMICAL- BUILDINGMATERIAL
Cement OPC, PPC Chloride IS 4032 1985 RA :2019
10 CHEMICAL- BUILDINGMATERIAL
Cement OPC, PPC Insoluble Residue IS 4032 1985 RA :2019
11 CHEMICAL- BUILDINGMATERIAL
Cement OPC, PPC Iron Oxide IS 4032 1985 RA :2019
12 CHEMICAL- BUILDINGMATERIAL
Cement OPC, PPC Loss of Ignition IS 4032 -1985 RA :2019
13 CHEMICAL- BUILDINGMATERIAL
Cement OPC, PPC Magnesium Oxide IS 4032 1985 RA :2019
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name COSMO ANALYTICAL LAB, C-423, SECTOR-10, NOIDA, GAUTAM BUDH NAGAR,UTTAR PRADESH , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6379 Page No. : 1 / 33
Validity 14/10/2019 to 13/10/2021 Last Amended on 08/11/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
14 CHEMICAL- BUILDINGMATERIAL
Cement OPC, PPC Silica IS 4032 1985 RA :2019
15 CHEMICAL- BUILDINGMATERIAL
Cement OPC, PPC Total Sulphur (as SO3) IS 4032 1985 RA :2019
16 CHEMICAL- BUILDINGMATERIAL
Fly ash Combined Ferric Oxide (Fe2O3)and Alumina (Al2O3)
IS 1727 1967 RA: 2013
17 CHEMICAL- BUILDINGMATERIAL
Fly ash Fe2O3 IS 1727 1967 RA :2013
18 CHEMICAL- BUILDINGMATERIAL
Fly ash Loss on Ignition IS 1727-1967 RA: 2013
19 CHEMICAL- BUILDINGMATERIAL
Fly ash Magnesium oxide (MgO) IS 1727 1967 RA :2013
20 CHEMICAL- BUILDINGMATERIAL
Fly ash Silicon dioxide (SiO2) IS 1727 1967 RA :2013
21 CHEMICAL- BUILDINGMATERIAL
Fly ash Total sulphur as sulphur trioxide(SO3)
IS 1727 1967 RA :2013
22 CHEMICAL- BUILDINGMATERIAL
Silica Fume Loss on ignition IS 1727 1967 RA :2013
23 CHEMICAL- BUILDINGMATERIAL
Silica Fume Moisture content (%/mass) IS 1727 1967 RA :2013
24 CHEMICAL- BUILDINGMATERIAL
Silica Fume SiO2 IS 1727 1967 RA :2013
25 CHEMICAL-CORROSION TESTS
Phosphate Coating Phosphate Coating IS 3618-1966: 2016
26 CHEMICAL-CORROSION TESTS
Salt Spray Test Salt Spray Test ASTM B 117: 2018
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name COSMO ANALYTICAL LAB, C-423, SECTOR-10, NOIDA, GAUTAM BUDH NAGAR,UTTAR PRADESH , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6379 Page No. : 2 / 33
Validity 14/10/2019 to 13/10/2021 Last Amended on 08/11/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
27 CHEMICAL-CORROSION TESTS
Zinc Coating Mass of Zinc Coating IS 6745:1972, RA:2016
28 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Carbon ASTM E 415: 2017
29 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Manganese ASTM E 415: 2017
30 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Phosphorus ASTM E 415: 2017
31 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Silicon ASTM E 415: 2017
32 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Sulphur ASTM E 415: 2017
33 CHEMICAL- METALS& ALLOYS
Aluminium & Aluminium alloys Tin ASTM E 1251-a: 2017
34 CHEMICAL- METALS& ALLOYS
Aluminum and Aluminum Alloy Chromium ASTM E 1251-a: 2017
35 CHEMICAL- METALS& ALLOYS
Aluminum and Aluminum Alloy Copper ASTM E 1251-a: 2017
36 CHEMICAL- METALS& ALLOYS
Aluminum and Aluminum Alloy Iron ASTM E 1251-a: 2017
37 CHEMICAL- METALS& ALLOYS
Aluminum and Aluminum Alloy Lead ASTM E 1251-a: 2017
38 CHEMICAL- METALS& ALLOYS
Aluminum and Aluminum Alloy Magnesium ASTM E 1251-a: 2017
39 CHEMICAL- METALS& ALLOYS
Aluminum and Aluminum Alloy Manganese ASTM E 1251-a: 2017
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name COSMO ANALYTICAL LAB, C-423, SECTOR-10, NOIDA, GAUTAM BUDH NAGAR,UTTAR PRADESH , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6379 Page No. : 3 / 33
Validity 14/10/2019 to 13/10/2021 Last Amended on 08/11/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
40 CHEMICAL- METALS& ALLOYS
Aluminum and Aluminum Alloy Nickel ASTM E 1251-a: 2017
41 CHEMICAL- METALS& ALLOYS
Aluminum and Aluminum Alloy Silicon ASTM E 1251-a: 2017
42 CHEMICAL- METALS& ALLOYS
Aluminum and Aluminum Alloy Titanium ASTM E 1251-a: 2017
43 CHEMICAL- METALS& ALLOYS
Aluminum and Aluminum Alloy Zinc ASTM E 1251-a: 2017
44 CHEMICAL- METALS& ALLOYS
Cast Iron Carbon IS 228 (Part-1) 1987RA: 2018
45 CHEMICAL- METALS& ALLOYS
Cast Iron Carbon ASTM E 1999: 2018
46 CHEMICAL- METALS& ALLOYS
Cast Iron Chromium ASTM E 1999: 2018
47 CHEMICAL- METALS& ALLOYS
Cast Iron Copper ASTM E 1999: 2018
48 CHEMICAL- METALS& ALLOYS
Cast Iron Magnesium ASTM E 1999: 2018
49 CHEMICAL- METALS& ALLOYS
Cast Iron Manganese IS 228 (Part-2) 1987RA: 2018
50 CHEMICAL- METALS& ALLOYS
Cast Iron Manganese ASTM E 1999: 2018
51 CHEMICAL- METALS& ALLOYS
Cast Iron Phosphorus IS 228 (Part-3)-1987RA: 2018
52 CHEMICAL- METALS& ALLOYS
Cast Iron Phosphorus ASTM E 1999: 2018
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name COSMO ANALYTICAL LAB, C-423, SECTOR-10, NOIDA, GAUTAM BUDH NAGAR,UTTAR PRADESH , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6379 Page No. : 4 / 33
Validity 14/10/2019 to 13/10/2021 Last Amended on 08/11/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
53 CHEMICAL- METALS& ALLOYS
Cast Iron Silicon IS 228(Part-8)-1989RA: 2014
54 CHEMICAL- METALS& ALLOYS
Cast Iron Silicon ASTM E 1999: 2018
55 CHEMICAL- METALS& ALLOYS
Cast Iron Sulphur ASTM E 1999: 2018
56 CHEMICAL- METALS& ALLOYS
Copper & Copper alloy Cobalt BS EN 15079: 2015
57 CHEMICAL- METALS& ALLOYS
Copper & Copper Alloy Copper BS EN 15079: 2015
58 CHEMICAL- METALS& ALLOYS
Copper & Copper Alloy Magnesium BS EN 15079: 2015
59 CHEMICAL- METALS& ALLOYS
Copper & Copper Alloy Manganese BS EN 15079: 2015
60 CHEMICAL- METALS& ALLOYS
Copper and Copper Alloys Aluminium BS EN 15079: 2015
61 CHEMICAL- METALS& ALLOYS
Copper and Copper Alloys Antimony BS EN 15079: 2015
62 CHEMICAL- METALS& ALLOYS
Copper and Copper Alloys As BS EN 15079: 2015
63 CHEMICAL- METALS& ALLOYS
Copper and Copper Alloys Bismuth BS EN 15079: 2015
64 CHEMICAL- METALS& ALLOYS
Copper and Copper Alloys Iron BS EN 15079: 2015
65 CHEMICAL- METALS& ALLOYS
Copper and Copper Alloys Lead BS EN 15079: 2015
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name COSMO ANALYTICAL LAB, C-423, SECTOR-10, NOIDA, GAUTAM BUDH NAGAR,UTTAR PRADESH , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6379 Page No. : 5 / 33
Validity 14/10/2019 to 13/10/2021 Last Amended on 08/11/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
66 CHEMICAL- METALS& ALLOYS
Copper and Copper Alloys Nickel BS EN 15079: 2015
67 CHEMICAL- METALS& ALLOYS
Copper and Copper Alloys Phosphorus BS EN 15079: 2015
68 CHEMICAL- METALS& ALLOYS
Copper and Copper Alloys Silicon BS EN 15079: 2015
69 CHEMICAL- METALS& ALLOYS
Copper and Copper Alloys Tin BS EN 15079: 2015
70 CHEMICAL- METALS& ALLOYS
Copper and Copper Alloys Zinc BS EN 15079: 2015
71 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Carbon IS 228 (Part-1) 1987RA: 2018
72 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Chromium IS 228 (Part-6)-1987RA: 2014
73 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Cobalt ASTM E 415: 2017
74 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Lead ASTM E 415: 2017
75 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Manganese IS 228 (Part- 2)-1987RA: 2018
76 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Niobium ASTM E 415: 2017
77 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Phosphorus IS 228 (Part-3) 1987RA: 2018
78 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Silicon IS 228 (Part-8)- 1989RA: 2014
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name COSMO ANALYTICAL LAB, C-423, SECTOR-10, NOIDA, GAUTAM BUDH NAGAR,UTTAR PRADESH , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6379 Page No. : 6 / 33
Validity 14/10/2019 to 13/10/2021 Last Amended on 08/11/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
79 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Tin ASTM E 415: 2017
80 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Titanium ASTM E 415: 2017
81 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Vanadium ASTM E 415: 2017
82 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Aluminium ASTM E 415: 2017
83 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Boron ASTM E 415: 2017
84 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Chromium ASTM E 415: 2017
85 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Copper ASTM E 415: 2017
86 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Molybdenum ASTM E 415: 2017
87 CHEMICAL- METALS& ALLOYS
Low Alloy Steel Nickel AETM E 415: 2017
88 CHEMICAL- METALS& ALLOYS
Plain Carbon Steel Carbon IS 228 (Part-1) 1987RA: 2018
89 CHEMICAL- METALS& ALLOYS
Plain Carbon Steel Manganese IS 228(Part-2) 1987RA: 2014
90 CHEMICAL- METALS& ALLOYS
Plain Carbon Steel Phosphorus IS 228 (Part-3) 1987RA: 2018
91 CHEMICAL- METALS& ALLOYS
Plain Carbon Steel Silicon IS 228 (Part-8) 1989RA: 2014
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name COSMO ANALYTICAL LAB, C-423, SECTOR-10, NOIDA, GAUTAM BUDH NAGAR,UTTAR PRADESH , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6379 Page No. : 7 / 33
Validity 14/10/2019 to 13/10/2021 Last Amended on 08/11/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
92 CHEMICAL- METALS& ALLOYS
Stainless Steel Carbon ASTM E 1086: 2014
93 CHEMICAL- METALS& ALLOYS
Stainless Steel Carbon IS 228 (Part-1)-1987RA: 2018
94 CHEMICAL- METALS& ALLOYS
Stainless Steel Chromium ASTM E 1086: 2014
95 CHEMICAL- METALS& ALLOYS
Stainless Steel Chromium IS 228 (Part-6) 1987RA: 2014
96 CHEMICAL- METALS& ALLOYS
Stainless Steel Copper ASTM E 1086: 2014
97 CHEMICAL- METALS& ALLOYS
Stainless Steel Manganese IS 228 (Part-2) 1987RA: 2018
98 CHEMICAL- METALS& ALLOYS
Stainless Steel Manganese ASTM E 1086: 2014
99 CHEMICAL- METALS& ALLOYS
Stainless Steel Molybdenum ASTM E 1086: 2014
100 CHEMICAL- METALS& ALLOYS
Stainless Steel Nickel ASTM E 1086: 2014
101 CHEMICAL- METALS& ALLOYS
Stainless Steel Phosphorus IS 228 (Part-3) 1987RA : 2018
102 CHEMICAL- METALS& ALLOYS
Stainless Steel Phosphorus ASTM E 1086: 2014
103 CHEMICAL- METALS& ALLOYS
Stainless Steel Silicon IS 228 (Part-8) 1989RA: 2014
104 CHEMICAL- METALS& ALLOYS
Stainless Steel Silicon ASTM E 1086: 2014
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name COSMO ANALYTICAL LAB, C-423, SECTOR-10, NOIDA, GAUTAM BUDH NAGAR,UTTAR PRADESH , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6379 Page No. : 8 / 33
Validity 14/10/2019 to 13/10/2021 Last Amended on 08/11/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
105 CHEMICAL- METALS& ALLOYS
Stainless Steel Sulphur ASTM E 1086: 2014
106 CHEMICAL- METALS& ALLOYS
Tool Steel Carbon ASTM E 352: 2018
107 CHEMICAL- METALS& ALLOYS
Tool Steel Chromium ASTM E 352: 2018
108 CHEMICAL- METALS& ALLOYS
Tool Steel Cobalt ASTM E 352: 2018
109 CHEMICAL- METALS& ALLOYS
Tool Steel Manganese ASTM E 352: 2018
110 CHEMICAL- METALS& ALLOYS
Tool Steel Molybdenum ASTM E 352: 2018
111 CHEMICAL- METALS& ALLOYS
Tool Steel Nickel ASTM E 352: 2018
112 CHEMICAL- METALS& ALLOYS
Tool Steel Phosphorus ASTM E 352: 2018
113 CHEMICAL- METALS& ALLOYS
Tool Steel Silicon ASTM E 352: 2018
114 CHEMICAL- METALS& ALLOYS
Tool Steel Sulphur ASTM E 352: 2018
115 CHEMICAL- METALS& ALLOYS
Tool Steel Tungsten ASTM E 352: 2018
116 CHEMICAL- METALS& ALLOYS
Tool Steel Vanadium ASTM E 352: 2018
117 CHEMICAL- PLASTIC& RESINS
Plastic & Polymer Identification ASTM E 1252-e1 (ByFTIR) 1998 RA: 2013
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name COSMO ANALYTICAL LAB, C-423, SECTOR-10, NOIDA, GAUTAM BUDH NAGAR,UTTAR PRADESH , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6379 Page No. : 9 / 33
Validity 14/10/2019 to 13/10/2021 Last Amended on 08/11/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
118 CHEMICAL- PLASTIC& RESINS
Plastics & polymers Ash Content ASTM D 5630: 2013
119 CHEMICAL- RUBBER& RUBBERPRODUCTS
Rubber & its Product Density IS 3400 (Part 9): 2014
120 CHEMICAL- RUBBER& RUBBERPRODUCTS
Rubber & Rubber Product Identification ASTM E 1252-e1 (ByFTIR)- 1998 RA: 2013
121 CHEMICAL- WATER Construction Water Acidity (ml of 0.02N NAOH Solutionused to neutralize 100 ml of WaterSample
IS 3025 (Part 22)-1986RA: 2019
122 CHEMICAL- WATER Construction Water Alkalinity (ml of 0.02 N H2SO4Solution used to neutralize 100 mlof water sample using mixedindicator
IS 3025 (Part 23)-1986RA: 2019
123 CHEMICAL- WATER Construction Water Chloride IS 3025 (Part-32) 1988RA: 2019
124 CHEMICAL- WATER Construction Water Inorganic Solids IS 3025 (Part 18)-1984RA: 2017
125 CHEMICAL- WATER Construction Water Organic Solids IS 3025 (Part 18)-1984RA: 2017
126 CHEMICAL- WATER Construction Water pH Value IS 3025 (Part-11)Electrometric Method :-1983 RA: 2017
127 CHEMICAL- WATER Construction Water Total Suspended Solids IS 3025 (Part17)Gravimetric Method1984 RA: 2017
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name COSMO ANALYTICAL LAB, C-423, SECTOR-10, NOIDA, GAUTAM BUDH NAGAR,UTTAR PRADESH , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6379 Page No. : 10 / 33
Validity 14/10/2019 to 13/10/2021 Last Amended on 08/11/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
128 MECHANICAL-BUILDINGSMATERIALS
AAC Block Compressive Strength IS 2185 (Part-1)-2005RA: 2015
129 MECHANICAL-BUILDINGSMATERIALS
AAC Block Compressive Strength IS 2185 (Part-1)-2005RA: 2015
130 MECHANICAL-BUILDINGSMATERIALS
AAC Block Density IS 2185 (Part 1)-2005RA: 2015
131 MECHANICAL-BUILDINGSMATERIALS
AAC Block Density IS 2185 (Part 1)-2005RA: 2015
132 MECHANICAL-BUILDINGSMATERIALS
AAC Block Dimension IS 2185 (Part 1)-2005RA: 2015
133 MECHANICAL-BUILDINGSMATERIALS
AAC Block Dimension IS 2185 (Part 1)-2005RA: 2015
134 MECHANICAL-BUILDINGSMATERIALS
AAC Block Water Absorption IS 2185 (Part-1)-2005RA: 2015
135 MECHANICAL-BUILDINGSMATERIALS
AAC Block Water Absorption IS 2185 (Part-1)-2005RA: 2015
136 MECHANICAL-BUILDINGSMATERIALS
Bitumen Ductility at 25 degree C IS 1201 to IS 1220-1978 RA : 2014
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name COSMO ANALYTICAL LAB, C-423, SECTOR-10, NOIDA, GAUTAM BUDH NAGAR,UTTAR PRADESH , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6379 Page No. : 11 / 33
Validity 14/10/2019 to 13/10/2021 Last Amended on 08/11/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
137 MECHANICAL-BUILDINGSMATERIALS
Bitumen Ductility at 25 degree C IS 1201 to IS 1220-1978 RA : 2014
138 MECHANICAL-BUILDINGSMATERIALS
Bitumen Flash Point IS 1448 (Part 69): 2013
139 MECHANICAL-BUILDINGSMATERIALS
Bitumen Flash Point IS 1448 (Part 69): 2013
140 MECHANICAL-BUILDINGSMATERIALS
Bitumen Penetration IS 1201 to IS 1220:1978, RA : 2014
141 MECHANICAL-BUILDINGSMATERIALS
Bitumen Penetration IS 1201 to IS1220:1978, RA : 2014
142 MECHANICAL-BUILDINGSMATERIALS
Bitumen Softening Point IS 1201 to IS1220:1978, RA : 2014
143 MECHANICAL-BUILDINGSMATERIALS
Bitumen Softening Point IS 1201 to IS1220:1978, RA : 2014
144 MECHANICAL-BUILDINGSMATERIALS
Bituminous mix Binder Content IRC SP11: 1988
145 MECHANICAL-BUILDINGSMATERIALS
Bituminous mix Binder Content IRC SP11: 1988
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name COSMO ANALYTICAL LAB, C-423, SECTOR-10, NOIDA, GAUTAM BUDH NAGAR,UTTAR PRADESH , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6379 Page No. : 12 / 33
Validity 14/10/2019 to 13/10/2021 Last Amended on 08/11/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
146 MECHANICAL-BUILDINGSMATERIALS
Burnt Clay /Flyash Bricks Compressive Strength IS 3495 (Part 1) 1992RA: 2016
147 MECHANICAL-BUILDINGSMATERIALS
Burnt Clay /Flyash Bricks Compressive Strength IS 3495 (Part 1) 1992RA: 2016
148 MECHANICAL-BUILDINGSMATERIALS
Burnt Clay /Flyash Bricks Dimensionb) Width IS 1077 : 1992: 2016
149 MECHANICAL-BUILDINGSMATERIALS
Burnt Clay /Flyash Bricks Dimensionb) Width IS 1077 : 1992: 2016
150 MECHANICAL-BUILDINGSMATERIALS
Burnt Clay /Flyash Bricks Dimensionc) Height IS 1077 :1992 RA:2016
151 MECHANICAL-BUILDINGSMATERIALS
Burnt Clay /Flyash Bricks Dimensionc) Height IS 1077 :1992 RA:2016
152 MECHANICAL-BUILDINGSMATERIALS
Burnt Clay /Flyash Bricks Dimensiona) Length IS 1077- 1992: 2016
153 MECHANICAL-BUILDINGSMATERIALS
Burnt Clay /Flyash Bricks Dimensiona) Length IS 1077- 1992: 2016
154 MECHANICAL-BUILDINGSMATERIALS
Burnt Clay /Flyash Bricks Efflorescence IS 3495 (Part 3) 1992RA: 2016
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name COSMO ANALYTICAL LAB, C-423, SECTOR-10, NOIDA, GAUTAM BUDH NAGAR,UTTAR PRADESH , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6379 Page No. : 13 / 33
Validity 14/10/2019 to 13/10/2021 Last Amended on 08/11/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
155 MECHANICAL-BUILDINGSMATERIALS
Burnt Clay /Flyash Bricks Efflorescence IS 3495 (Part 3) 1992RA: 2016
156 MECHANICAL-BUILDINGSMATERIALS
Burnt Clay /Flyash Bricks Water Absorption IS 3495 (Part 2) 1992RA: 2016
157 MECHANICAL-BUILDINGSMATERIALS
Burnt Clay /Flyash Bricks Water Absorption IS 3495 (Part 2) 1992RA: 2016
158 MECHANICAL-BUILDINGSMATERIALS
Cement (OPC/PPC) Soundness (By Autoclave) IS 4031 (Part 3) 1988RA: 2019
159 MECHANICAL-BUILDINGSMATERIALS
Cement (OPC/PPC) Soundness (By Autoclave) IS 4031 (Part 3) 1988RA: 2019
160 MECHANICAL-BUILDINGSMATERIALS
Cement (OPC/PPC) Compressive Strength IS 4031 (Part 6) 1988RA: 2019
161 MECHANICAL-BUILDINGSMATERIALS
Cement (OPC/PPC) Compressive Strength IS 4031 (Part 6) 1988RA: 2019
162 MECHANICAL-BUILDINGSMATERIALS
Cement (OPC/PPC) Consistency IS 4031 (Part 4) 1988RA: 2019
163 MECHANICAL-BUILDINGSMATERIALS
Cement (OPC/PPC) Consistency IS 4031 (Part 4) 1988RA: 2019
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name COSMO ANALYTICAL LAB, C-423, SECTOR-10, NOIDA, GAUTAM BUDH NAGAR,UTTAR PRADESH , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6379 Page No. : 14 / 33
Validity 14/10/2019 to 13/10/2021 Last Amended on 08/11/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
164 MECHANICAL-BUILDINGSMATERIALS
Cement (OPC/PPC) Fineness (By Blaine AirPermeability Apparatus)
IS 4031 (Part 2) 1999RA: 2013
165 MECHANICAL-BUILDINGSMATERIALS
Cement (OPC/PPC) Fineness (By Blaine AirPermeability Apparatus)
IS 4031 (Part 2) 1999RA: 2013
166 MECHANICAL-BUILDINGSMATERIALS
Cement (OPC/PPC) Setting Timea) Initial Setting Time IS 4031( Part 5) 1988RA: 2019
167 MECHANICAL-BUILDINGSMATERIALS
Cement (OPC/PPC) Setting Timea) Initial Setting Time IS 4031( Part 5) 1988RA: 2019
168 MECHANICAL-BUILDINGSMATERIALS
Cement (OPC/PPC) Setting Timeb) Final Setting Time IS 4031 (Part 5) 1988RA: 2019
169 MECHANICAL-BUILDINGSMATERIALS
Cement (OPC/PPC) Setting Timeb) Final Setting Time IS 4031 (Part 5) 1988RA: 2019
170 MECHANICAL-BUILDINGSMATERIALS
Cement (OPC/PPC) Soundness (By Lechatelier Method) IS 4031 (Part 3) 1988RA: 2019
171 MECHANICAL-BUILDINGSMATERIALS
Cement (OPC/PPC) Soundness (By Lechatelier Method) IS 4031 (Part 3) 1988RA: 2019
172 MECHANICAL-BUILDINGSMATERIALS
Cement (OPC/PPC) Specific Gravity IS 4031 (Part 11) 1988RA: 2019
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name COSMO ANALYTICAL LAB, C-423, SECTOR-10, NOIDA, GAUTAM BUDH NAGAR,UTTAR PRADESH , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6379 Page No. : 15 / 33
Validity 14/10/2019 to 13/10/2021 Last Amended on 08/11/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
173 MECHANICAL-BUILDINGSMATERIALS
Cement (OPC/PPC) Specific Gravity IS 4031 (Part 11) 1988RA: 2019
174 MECHANICAL-BUILDINGSMATERIALS
Coarse Aggregate 10% Fine Value IS 2386 (Part 4) 1963RA: 2016
175 MECHANICAL-BUILDINGSMATERIALS
Coarse Aggregate 10% Fine Value IS 2386 (Part 4) 1963RA: 2016
176 MECHANICAL-BUILDINGSMATERIALS
Coarse Aggregate Bulk Density IS 2386 (Part-3)-1963RA: 2016
177 MECHANICAL-BUILDINGSMATERIALS
Coarse Aggregate Bulk Density IS 2386 (Part-3)-1963RA: 2016
178 MECHANICAL-BUILDINGSMATERIALS
Coarse Aggregate Crushing Value IS 2386 (Part 4) 1963RA: 2016
179 MECHANICAL-BUILDINGSMATERIALS
Coarse Aggregate Crushing Value IS 2386 (Part 4) 1963RA: 2016
180 MECHANICAL-BUILDINGSMATERIALS
Coarse Aggregate Elongation Index IS 2386 (Part 1) 1963RA: 2016
181 MECHANICAL-BUILDINGSMATERIALS
Coarse Aggregate Elongation Index IS 2386 (Part 1) 1963RA: 2016
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name COSMO ANALYTICAL LAB, C-423, SECTOR-10, NOIDA, GAUTAM BUDH NAGAR,UTTAR PRADESH , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6379 Page No. : 16 / 33
Validity 14/10/2019 to 13/10/2021 Last Amended on 08/11/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
182 MECHANICAL-BUILDINGSMATERIALS
Coarse Aggregate Flakiness Index IS 2386 (Part 1) 1963RA: 2016
183 MECHANICAL-BUILDINGSMATERIALS
Coarse Aggregate Flakiness Index IS 2386 (Part 1) 1963RA: 2016
184 MECHANICAL-BUILDINGSMATERIALS
Coarse Aggregate Impact Value IS 2386 (Part 4) 1963RA: 2016
185 MECHANICAL-BUILDINGSMATERIALS
Coarse Aggregate Impact Value IS 2386 (Part 4) 1963RA: 2016
186 MECHANICAL-BUILDINGSMATERIALS
Coarse Aggregate Loss Angeles Abrasion value IS 2386 (Part 4) 1963RA: 2016
187 MECHANICAL-BUILDINGSMATERIALS
Coarse Aggregate Loss Angeles Abrasion value IS 2386 (Part 4) 1963RA: 2016
188 MECHANICAL-BUILDINGSMATERIALS
Coarse Aggregate Sieve Analysis (2.36 mm to 80 mm)IS Sieve
IS 2386 (Part 1) 1963RA: 2016
189 MECHANICAL-BUILDINGSMATERIALS
Coarse Aggregate Sieve Analysis (2.36 mm to 80 mm)IS Sieve
IS 2386 (Part 1) 1963RA: 2016
190 MECHANICAL-BUILDINGSMATERIALS
Coarse Aggregate Specific Gravity IS 2386 (Part 3) 1963RA: 2016
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name COSMO ANALYTICAL LAB, C-423, SECTOR-10, NOIDA, GAUTAM BUDH NAGAR,UTTAR PRADESH , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6379 Page No. : 17 / 33
Validity 14/10/2019 to 13/10/2021 Last Amended on 08/11/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
191 MECHANICAL-BUILDINGSMATERIALS
Coarse Aggregate Specific Gravity IS 2386 (Part 3) 1963RA: 2016
192 MECHANICAL-BUILDINGSMATERIALS
Coarse Aggregate Water Absorption IS 2386 (Part 3) 1963RA: 2016
193 MECHANICAL-BUILDINGSMATERIALS
Coarse Aggregate Water Absorption IS 2386 (Part 3) 1963RA: 2016
194 MECHANICAL-BUILDINGSMATERIALS
Concrete Cube & Cores Compressive Strength IS 516:1959, RA: 2013
195 MECHANICAL-BUILDINGSMATERIALS
Concrete Cube & Cores Compressive Strength IS 516:1959, RA: 2013
196 MECHANICAL-BUILDINGSMATERIALS
Fine Aggregate Bulk Density IS 2386 (Part 3) 1963RA: 2016
197 MECHANICAL-BUILDINGSMATERIALS
Fine Aggregate Bulk Density IS 2386 (Part 3) 1963RA: 2016
198 MECHANICAL-BUILDINGSMATERIALS
Fine Aggregate Deleterious material- Clay Lumps IS 2386 (Part 2) RA:2016
199 MECHANICAL-BUILDINGSMATERIALS
Fine Aggregate Deleterious material- Clay Lumps IS 2386 (Part 2) RA:2016
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name COSMO ANALYTICAL LAB, C-423, SECTOR-10, NOIDA, GAUTAM BUDH NAGAR,UTTAR PRADESH , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6379 Page No. : 18 / 33
Validity 14/10/2019 to 13/10/2021 Last Amended on 08/11/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
200 MECHANICAL-BUILDINGSMATERIALS
Fine Aggregate Deleterious material -Coal & Lignite IS 2386 (Part 2) 1963RA: 2016
201 MECHANICAL-BUILDINGSMATERIALS
Fine Aggregate Deleterious material -Coal & Lignite IS 2386 (Part 2) 1963RA: 2016
202 MECHANICAL-BUILDINGSMATERIALS
Fine Aggregate Particle Size (Sieve Analysis) IS 2386 (Part 1) 1963RA: 2016
203 MECHANICAL-BUILDINGSMATERIALS
Fine Aggregate Particle Size (Sieve Analysis) IS 2386 (Part 1) 1963RA: 2016
204 MECHANICAL-BUILDINGSMATERIALS
Fine Aggregate Specific Gravity IS 2386 (Part 3) 1963RA: 2016
205 MECHANICAL-BUILDINGSMATERIALS
Fine Aggregate Specific Gravity IS 2386 (Part 3) 1963RA: 2016
206 MECHANICAL-BUILDINGSMATERIALS
Fine Aggregate Water Absorption IS 2386 (Part 3) 1963RA: 2016
207 MECHANICAL-BUILDINGSMATERIALS
Fine Aggregate Water Absorption IS 2386 (Part 3) 1963RA: 2016
208 MECHANICAL-BUILDINGSMATERIALS
Fine Aggregate Deleterious material-Finer than 75 µIS Sieve
IS 2386 (Part 1) 1963RA: 2016
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name COSMO ANALYTICAL LAB, C-423, SECTOR-10, NOIDA, GAUTAM BUDH NAGAR,UTTAR PRADESH , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6379 Page No. : 19 / 33
Validity 14/10/2019 to 13/10/2021 Last Amended on 08/11/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
209 MECHANICAL-BUILDINGSMATERIALS
Fine Aggregate Deleterious material-Finer than 75 µIS Sieve
IS 2386 (Part 1) 1963RA: 2016
210 MECHANICAL-BUILDINGSMATERIALS
Fly Ash Compressive Strength at 28 days IS 1727:1967, RA :2013
211 MECHANICAL-BUILDINGSMATERIALS
Fly ash Compressive strength at 28 days IS 1727:1967, RA :2013
212 MECHANICAL-BUILDINGSMATERIALS
Fly ash Fineness by wet sieving (45 micronIS Sieve)
IS 1727 1967 RA :2013
213 MECHANICAL-BUILDINGSMATERIALS
Fly ash Fineness by wet sieving (45 micronIS Sieve)
IS 1727 1967 RA :2013
214 MECHANICAL-BUILDINGSMATERIALS
Fly ash Fineness-specific surface byBlaine’s permeability method
IS 1727:1967, RA :2013
215 MECHANICAL-BUILDINGSMATERIALS
Fly ash Fineness-specific surface byBlaine’s permeability method
IS 1727:1967, RA :2013
216 MECHANICAL-BUILDINGSMATERIALS
Fly ash Lime reactivity-Avg compressivestrength
IS 1727:1967, RA :2013
217 MECHANICAL-BUILDINGSMATERIALS
Fly ash Lime reactivity-Avg compressivestrength
IS 1727:1967, RA :2013
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name COSMO ANALYTICAL LAB, C-423, SECTOR-10, NOIDA, GAUTAM BUDH NAGAR,UTTAR PRADESH , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6379 Page No. : 20 / 33
Validity 14/10/2019 to 13/10/2021 Last Amended on 08/11/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
218 MECHANICAL-BUILDINGSMATERIALS
Fly ash Soundness by autoclave test IS 1727 1967 RA :2013
219 MECHANICAL-BUILDINGSMATERIALS
Fly ash Soundness by autoclave test IS 1727 1967 RA :2013
220 MECHANICAL-BUILDINGSMATERIALS
Fly ash Specific Gravity IS 1727 1967 RA :2013
221 MECHANICAL-BUILDINGSMATERIALS
Fly ash Specific Gravity IS 1727 1967 RA :2013
222 MECHANICAL-BUILDINGSMATERIALS
Paver Block Compressive Strength IS 15658:2006, RA:2017
223 MECHANICAL-BUILDINGSMATERIALS
Paver Block Compressive Strength IS 15658:2006, RA:2017
224 MECHANICAL-BUILDINGSMATERIALS
Paver Block Water Absorption IS 15658:2006, RA:2017
225 MECHANICAL-BUILDINGSMATERIALS
Paver Block Water Absorption IS 15658:2006, RA:2017
226 MECHANICAL-BUILDINGSMATERIALS
Silica Fumes Compressive Strength IS 1727:1967, RA :2013
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name COSMO ANALYTICAL LAB, C-423, SECTOR-10, NOIDA, GAUTAM BUDH NAGAR,UTTAR PRADESH , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6379 Page No. : 21 / 33
Validity 14/10/2019 to 13/10/2021 Last Amended on 08/11/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
227 MECHANICAL-BUILDINGSMATERIALS
Silica Fumes Compressive Strength IS 1727:1967, RA :2013
228 MECHANICAL-BUILDINGSMATERIALS
Silica Fumes Oversize percent retained on 45micron IS sieve
IS 1727 1967 RA :2013
229 MECHANICAL-BUILDINGSMATERIALS
Silica Fumes Oversize percent retained on 45micron IS sieve
IS 1727 1967 RA :2013
230 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Copper, Aluminium 0.2% Proof Stress IS 1608 Part 1: 2018
231 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Copper, Aluminium Elongation % IS 1608 Part 1: 2018
232 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Copper, Aluminium Elongation % IS 1608 Part 1 : 2018
233 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Copper, Aluminium Elongation % IS 1608 Part 1: 2018
234 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Copper, Aluminium Reduction Area % IS 1608 Part 1 : 2018
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name COSMO ANALYTICAL LAB, C-423, SECTOR-10, NOIDA, GAUTAM BUDH NAGAR,UTTAR PRADESH , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6379 Page No. : 22 / 33
Validity 14/10/2019 to 13/10/2021 Last Amended on 08/11/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
235 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Copper, Aluminium Tensile Strength IS 1608 Part 1: 2018
236 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Copper, Aluminium Tensile Strength IS 1608 Part 1: 2018
237 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Copper, Aluminium Tensile Strength IS 1608 Part 1: 2018
238 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Copper, Aluminium Yield Strength IS 1608 Part 1: 2018
239 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & non Ferrous Materialsalloys
Yield Strength ASTM A370: 2018
240 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & non Ferrous alloy &Product
Bend Test IS 1599 2012 RA: 2017
241 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & non Ferrous alloy &Product
Brinell Hardness Test IS 1500 (Part 1): 2019
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name COSMO ANALYTICAL LAB, C-423, SECTOR-10, NOIDA, GAUTAM BUDH NAGAR,UTTAR PRADESH , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6379 Page No. : 23 / 33
Validity 14/10/2019 to 13/10/2021 Last Amended on 08/11/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
242 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & non Ferrous alloy &Product
Microvickers Hardness Test (10gmto 1kg)
IS 1501 (part 1) 2013RA: 2018
243 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & non Ferrous alloy &Product
Microvickers Hardness Test (10gmto 1kg)
IS 1501 (Part 1) 2013RA: 2018
244 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & non Ferrous alloy &Product
Microvickers Hardness Test (10gmto 1kg)
IS 1501 (part 1) 2013RA: 2018
245 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & non Ferrous alloy &Product
Microvickers Hardness Test (10gmto 1kg)
IS 1501 (part 1) 2013RA: 2018
246 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & non Ferrous alloy &Product
Microvickers Hardness Test (10gmto 1kg)
IS 1501 (Part 1):2013,RA: 2018
247 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & non Ferrous alloy &Product
Rockwell Hardness TestHRB IS 1586-1: 2018
248 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & non Ferrous alloy &Product
Rockwell Hardness Test:HRA IS 1586-1 : 2018
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name COSMO ANALYTICAL LAB, C-423, SECTOR-10, NOIDA, GAUTAM BUDH NAGAR,UTTAR PRADESH , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6379 Page No. : 24 / 33
Validity 14/10/2019 to 13/10/2021 Last Amended on 08/11/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
249 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & non Ferrous alloy &Product
Rockwell Hardness TestHRC IS 1586-1: 2018
250 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & non Ferrous Material ,alloy
Reduction Area ASTM A 370: 2018
251 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & non Ferrous Material,alloy
0.2 % Proof Stress IS 1608 (Part-1): 2018
252 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & non Ferrous Materialalloy
0.2 % Proof Stress ASTM A370: 2018
253 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & Non Ferrous Materials Yield Strength ASTM A370: 2018
254 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & non Ferrous Materialsalloy
Tensile Strength ASTM A 370: 2018
255 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & non Ferrous Materials,alloy
Elongation ASTM A 370: 2018
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name COSMO ANALYTICAL LAB, C-423, SECTOR-10, NOIDA, GAUTAM BUDH NAGAR,UTTAR PRADESH , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6379 Page No. : 25 / 33
Validity 14/10/2019 to 13/10/2021 Last Amended on 08/11/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
256 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous & non Ferrous Materials,alloy & Product
Tensile Strength ASTM A370: 2018
257 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Ferrous materials, alloys & product Load Test IS 1608 (Part 1): 2018
258 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Reinforced steel bar Mass per meter IS 1786 2008 RA :2013
259 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Reinforced steel bar Rebend IS 1786 2008 RA: 2013
260 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel Charpy Impact “V” Notch (-60°C to22°C)
IS 1757 (Part 1): 2014
261 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel Izod Impact “V” Notch IS 1598 1977 RA: 2015
262 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel, Stainless Steel , cast Iron Elongation IS 1608 Part 1 : 2018
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name COSMO ANALYTICAL LAB, C-423, SECTOR-10, NOIDA, GAUTAM BUDH NAGAR,UTTAR PRADESH , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6379 Page No. : 26 / 33
Validity 14/10/2019 to 13/10/2021 Last Amended on 08/11/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
263 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel, Stainless Steel , cast Iron Reduction Area IS 1608 Part 1: 2018
264 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel, Stainless Steel , cast Iron Tensile Strength IS 1608 Part 1: 2018
265 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel, Stainless Steel , cast Iron Yield Strength IS 1608 Part 1: 2018
266 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel, Stainless Steel , cast Iron Yield Strength IS 1608 Part 1: 2018
267 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel, Stainless Steel , cast Iron, Tensile Strength IS 1608 Part 1: 2018
268 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Steel, Stainless Steel , cast Iron, Tensile Strength IS 1608 Part 1 : 2018
269 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Welded specimens Bend Test ASME (Sec.lX ): 2015
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name COSMO ANALYTICAL LAB, C-423, SECTOR-10, NOIDA, GAUTAM BUDH NAGAR,UTTAR PRADESH , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6379 Page No. : 27 / 33
Validity 14/10/2019 to 13/10/2021 Last Amended on 08/11/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
270 MECHANICAL-MECHANICALPROPERTIES OFMETALS
Welded specimens Transverse in Tensile ASME (Sec.lX) : 2015
271 MECHANICAL-METALLOGRAPHYTEST
Aluminium Microstructure ASM Handbook vol 9:2004
272 MECHANICAL-METALLOGRAPHYTEST
Austenite Stainless Steel Intergranular Corrosion TestPractice E
ASTM A 262: 2015
273 MECHANICAL-METALLOGRAPHYTEST
Austenite Stainless Steel Intergranular Corrosion TestPractice A
ASTM A 262: 2015
274 MECHANICAL-METALLOGRAPHYTEST
Cast Iron Designation of microstructure ofgraphite in cast iron by form, size &distribution by comparison method
IS 7754 1975 RA :2018
275 MECHANICAL-METALLOGRAPHYTEST
Materials, alloys & Products (Steel,Stainless Steel)
Microstructure ASM Handbook Vol. 9 :2004
276 MECHANICAL-METALLOGRAPHYTEST
Steel Depth of Decarburized Layer byMicroscopic Method
IS 6396 2000 RA :2018
277 MECHANICAL-METALLOGRAPHYTEST
Steel Determination of Case Depth byMicroscopic & hardness traverseMethod
IS 6416 1988 RA :2018
278 MECHANICAL-METALLOGRAPHYTEST
Steel Grain Size by Comparison Method IS 4748 2009 RA :2017
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name COSMO ANALYTICAL LAB, C-423, SECTOR-10, NOIDA, GAUTAM BUDH NAGAR,UTTAR PRADESH , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6379 Page No. : 28 / 33
Validity 14/10/2019 to 13/10/2021 Last Amended on 08/11/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
279 MECHANICAL-METALLOGRAPHYTEST
Steel Grain Size by Comparison Method ASTM E 112: 2013
280 MECHANICAL-METALLOGRAPHYTEST
Steel Inclusion Rating ASTM E 45-a: 2018
281 MECHANICAL-METALLOGRAPHYTEST
Steel Inclusion Rating (Steel Products) formethod -A
IS 4163 2004 RA :2017
282 MECHANICAL-METALLOGRAPHYTEST
Steel Macro Test ASTM E 381: 2017
283 MECHANICAL-PLASTICS ANDPLASTIC PRODUCTS
Plastic Material & its Product IZOD Impact Resistance ASTM D256-2010:2018
284 MECHANICAL-PLASTICS ANDPLASTIC PRODUCTS
Plastic material & product Hardness Shore A ASTM D 2240-e1: 2015
285 MECHANICAL-PLASTICS ANDPLASTIC PRODUCTS
Plastic material & Product Hardness Shore D ASTM D2240-e1: 2015
286 MECHANICAL-PLASTICS ANDPLASTIC PRODUCTS
Plastic materials & its Product Charpy Impact ASTM D6110: 2018
287 MECHANICAL-PLASTICS ANDPLASTIC PRODUCTS
Plastic materials & its Product Compressive Strength ASTM D695: 2015
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name COSMO ANALYTICAL LAB, C-423, SECTOR-10, NOIDA, GAUTAM BUDH NAGAR,UTTAR PRADESH , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6379 Page No. : 29 / 33
Validity 14/10/2019 to 13/10/2021 Last Amended on 08/11/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
288 MECHANICAL-PLASTICS ANDPLASTIC PRODUCTS
Plastic Materials & its Product Elongation ASTM D 638: 2014
289 MECHANICAL-PLASTICS ANDPLASTIC PRODUCTS
Plastic Materials & Its Product Tensile Strength ASTM D638: 2014
290 MECHANICAL-PLASTICS ANDPLASTIC PRODUCTS
Plastic materials & product Density ASTM D792: 2013
291 MECHANICAL-PLASTICS ANDPLASTIC PRODUCTS
Plastic Materials & product Flexural Properties ASTM D790: 2017
292 MECHANICAL-PLASTICS ANDPLASTIC PRODUCTS
Plastics & Product Melt Flow Rate ASTM D 1238: 2013
293 MECHANICAL-RUBBER ANDRUBBER PRODUCTS
Rubber & its Product Compression Set IS 3400 (Part-10)-1977RA: 2013
294 MECHANICAL-RUBBER ANDRUBBER PRODUCTS
Rubber & its Product Elongation at break ASTM D 412: 2016
295 MECHANICAL-RUBBER ANDRUBBER PRODUCTS
Rubber & its Product Tear Strength ASTM D 624-2000 RA:2012
296 MECHANICAL-RUBBER ANDRUBBER PRODUCTS
Rubber & its Product Tensile Strength ASTM D412: 2016
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name COSMO ANALYTICAL LAB, C-423, SECTOR-10, NOIDA, GAUTAM BUDH NAGAR,UTTAR PRADESH , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6379 Page No. : 30 / 33
Validity 14/10/2019 to 13/10/2021 Last Amended on 08/11/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
297 MECHANICAL-RUBBER ANDRUBBER PRODUCTS
Rubber & its Product Visual appearance IS 4985-2000 RA: 2015
298 MECHANICAL-RUBBER ANDRUBBER PRODUCTS
Synthetic Rubber & Product Hardness Shore A ASTM D 2240-e1: 2015
299 MECHANICAL-RUBBER ANDRUBBER PRODUCTS
Synthetic Rubber & Product Hardness Shore A IS 3400(Part-23) 2002RA: 2017
300 MECHANICAL- SOILAND ROCK
Bentonite Liquid limit IS 2720 (Part 5) 1985RA : 2015
301 MECHANICAL- SOILAND ROCK
Bentonite Liquid limit IS 2720 (Part 5) 1985RA : 2015
302 MECHANICAL- SOILAND ROCK
Bentonite pH at 2% suspension IS 2720 (Part 26) 1987RA: 2016
303 MECHANICAL- SOILAND ROCK
Bentonite pH at 2% suspension IS 2720 (Part 26) 1987RA: 2016
304 MECHANICAL- SOILAND ROCK
Bentonite Swelling Index IS 2720 (Part 40) 1977RA: 2016
305 MECHANICAL- SOILAND ROCK
Bentonite Swelling Index IS 2720 (Part 40) 1977RA: 2016
306 MECHANICAL- SOILAND ROCK
Soil Atterberg Limit a)Liquid Limit IS 2720 Part 5 1985RA : 2015
307 MECHANICAL- SOILAND ROCK
Soil Atterberg Limit a)Liquid Limit IS 2720 Part 5 1985RA : 2015
308 MECHANICAL- SOILAND ROCK
Soil California Bearing Ratio (CBR)value
IS 2720 Part 16 1987RA: 2016
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name COSMO ANALYTICAL LAB, C-423, SECTOR-10, NOIDA, GAUTAM BUDH NAGAR,UTTAR PRADESH , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6379 Page No. : 31 / 33
Validity 14/10/2019 to 13/10/2021 Last Amended on 08/11/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
309 MECHANICAL- SOILAND ROCK
Soil California Bearing Ratio (CBR)value
IS 2720 Part 16 1987RA: 2016
310 MECHANICAL- SOILAND ROCK
Soil Grain Size Analysis IS 2720 Part 1 1983RA: 2015
311 MECHANICAL- SOILAND ROCK
Soil Grain Size Analysis IS 2720 Part 1 1983RA: 2015
312 MECHANICAL- SOILAND ROCK
Soil Heavy Compaction Test b)OptimumMoisture Content
IS 2720 Part 8 1983RA: 2015
313 MECHANICAL- SOILAND ROCK
Soil Heavy Compaction Test b)OptimumMoisture Content
IS 2720 Part 8 1983RA: 2015
314 MECHANICAL- SOILAND ROCK
Soil Heavy Compaction Testa)MaximumDry Density
IS 2720 Part 8 1983RA: 2015
315 MECHANICAL- SOILAND ROCK
Soil Heavy Compaction Testa)MaximumDry Density
IS 2720 Part 8 1983RA: 2015
316 MECHANICAL- SOILAND ROCK
Soil Light Compaction Test : a)Maximum Dry Denstity
IS 2720 Part 7 1980,RA: 2016
317 MECHANICAL- SOILAND ROCK
Soil Light Compaction Test : a)Maximum Dry Denstity
IS 2720 Part 7 1980,RA: 2016
318 MECHANICAL- SOILAND ROCK
Soil Light Compaction Test: b) OptimumMoisture Content
IS 2720 (Part 7) 1980,RA : 2016
319 MECHANICAL- SOILAND ROCK
Soil Light Compaction Test: b) OptimumMoisture Content
IS 2720 (Part 7) 1980,RA : 2016
320 MECHANICAL- SOILAND ROCK
Stone (Marble, Kota Stone &Granite)
Compressive Strength IS 1121 (Part 1): 2013,RA: 2017
321 MECHANICAL- SOILAND ROCK
Stone (Marble, Kota Stone &Granite)
Compressive Strength IS 1121 (Part 1):2013,RA: 2017
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name COSMO ANALYTICAL LAB, C-423, SECTOR-10, NOIDA, GAUTAM BUDH NAGAR,UTTAR PRADESH , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6379 Page No. : 32 / 33
Validity 14/10/2019 to 13/10/2021 Last Amended on 08/11/2019
S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed
Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used
322 MECHANICAL- SOILAND ROCK
Stone (Marble, Kota Stone &Granite)
Moisture Content IS 1124-1974 RA: 2017
323 MECHANICAL- SOILAND ROCK
Stone (Marble, Kota Stone &Granite)
Moisture Content IS 1124-1974 RA: 2017
324 MECHANICAL- SOILAND ROCK
Stone (Marble, Kota Stone &Granite)
Specific Gravity IS 1122-1974 RA: 2017
325 MECHANICAL- SOILAND ROCK
Stone (Marble, Kota Stone &Granite)
Specific Gravity IS 1122-1974 RA: 2017
326 MECHANICAL- SOILAND ROCK
Stones (Marble, Kota Stone &Granite)
Water Absorption IS 1124-1974 RA: 2017
327 MECHANICAL- SOILAND ROCK
Stones (Marble, Kota Stone &Granite)
Water Absorption IS 1124-1974 RA: 2017
328 MECHANICAL- WOODAND WOODPRODUCTS
Timber Density IS 1708 (Part 1 to18):1986, RA: 2015
329 MECHANICAL- WOODAND WOODPRODUCTS
Timber Density IS 1708 (Part 1 to18):1986, RA: 2015
330 MECHANICAL- WOODAND WOODPRODUCTS
Timber Moisture Content IS 1708 (Part 1to 18)-1986 RA: 2015
331 MECHANICAL- WOODAND WOODPRODUCTS
Timber Moisture Content IS 1708 (Part 1to 18)-1986 RA: 2015
This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name COSMO ANALYTICAL LAB, C-423, SECTOR-10, NOIDA, GAUTAM BUDH NAGAR,UTTAR PRADESH , INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-6379 Page No. : 33 / 33
Validity 14/10/2019 to 13/10/2021 Last Amended on 08/11/2019