9
Laboratory 3. Oscilloscopes 2 Equipment: Bench equipment, decade capacitor, 10k decade resistor, box of leads, bnc-bnc cable, bnc T connector, 2- bnc-banana cables. Reading: Review circuit theory of sinusoidal steady state analysis, impedance and admittance, and Kirchhoff’s Law’s Using Phasor Analysis (Dorf and Svoboda, Sections 10.8 and 10.9) Review the posted material on Lissajous figures. Prelab assignment: 1. Review the Figure 1 RC circuit, and determine the relationship between Vout and Vs in terms of RL and CL (ignore Rs as Rs<<RL). Conduct this analysis in the steady state using phasors. 2. Look up the definition of capacitive reactance Xc of the capacitor. 3. When the frequency of the source is 1.2 khertz, determine the value of capacitance that will give a capacitive reactance Xc of 10kohm.

Lab 03- Oscilloscopes2

Embed Size (px)

DESCRIPTION

oscilloscopes types

Citation preview

Laboratory 3

Laboratory 3. Oscilloscopes 2

Equipment: Bench equipment, decade capacitor, 10k decade resistor, box of leads, bnc-bnc cable, bnc T connector, 2-bnc-banana cables.Reading: Review circuit theory of sinusoidal steady state analysis, impedance and admittance, and Kirchhoffs Laws Using Phasor Analysis (Dorf and Svoboda, Sections 10.8 and 10.9)

Review the posted material on Lissajous figures.

Prelab assignment:

1. Review the Figure 1 RC circuit, and determine the relationship between Vout and Vs in terms of RL and CL (ignore Rs as Rs