Upload
walter-alvarenga
View
3
Download
1
Embed Size (px)
DESCRIPTION
LA3607
Citation preview
Any and all SANYO products described or contained herein do not have specifications that can handleapplications that require extremely high levels of reliability, such as life-support systems, aircraftscontrol systems, or other applications whose failure can be reasonably expected to result in seriousphysical and/or material damage. Consult with your SANYO representative nearest you before usingany SANYO products described or contained herein in such applications.SANYO assumes no responsibility for equipment failures that result from using products at values thatexceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or otherparameters) listed in products specifications of any and all SANYO products described or containedherein.
Monolithic Linear IC
7-Band Graphic Equalizer
Ordering number:ENN2277A
LA3607
SANYO Electric Co.,Ltd. Semiconductor CompanyTOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
12800TH (KT)/8270TS/O137KI/8236KI, TS No.22771/6
Package Dimensionsunit:mm3021B-DIP20
[LA3607]
SANYO : DIP20
Features 7-band graphic equalizer for one channel can be formed
easily by externally connecting capacitors and variableresistors which fix fo (resonance frequency).
Series connection of the LA3607 makes multiband avail-able.
Boost, cut amount can be varied by external resistors. Highly stable to capacitive load.
CC
SpecificationsAbsolute Maximum Ratings at Ta = 25C
Operating Conditions at Ta = 25C
1 10
20 11
0.5
3.25
3.3
3.9m
ax
24.2
0.67 2.54 1.2
0.25
7.62 6.4
retemaraP lobmyS snoitidnoC sgnitaR tinUegatloVylppuSmumixaM V CC xam 02 V
noitapissiDrewoPelbawollA xamdP 003 WmerutarepmeTgnitarepO rpoT 57+ot02
erutarepmeTegarotS gtsT 521+ot04
retemaraP lobmyS snoitidnoC sgnitaR tinUegatloVylppuSdednemmoceR V CC 8 V
egnaRegatloVgnitarepO V CC po 51ot5 V
LA3607
No.22772/6
Operating Characteristics at Ta = 25C, VCC=8V, RL=10k W , Rg=600 W , See specified Test Circuit.
Test Method : VCC=8V, RL=10k W , Rg=600W
retemaraP lobmyS snoitidnoCsgnitaR
tinUnim pyt xam
tnerruCtnecseiuQ occI tnecseiuQ 7 9 AmniaGegatloV GV edomtalfllataBd01=niV,zHk1=f 8.3 8.0 2.2+ Bd
tnuomAtsooB TSOOB
zH06=f
sanekatsiBd01=oVtaedomtalfllataBd0
.zHk1=f
01 21 41 BdzH051=f 01 21 41 BdzH004=f 01 21 41 Bd
zHk1=f 01 21 41 BdzHk5.2=f 01 21 41 Bd
zHk6=f 01 21 41 BdzHk51=f 01 21 41 Bd
tnuomAtuC TUC
zH06=f 41 21 01 BdzH051=f 41 21 01 BdzH004=f 41 21 01 Bd
zHk1=f 41 21 01 BdzHk5.2=f 41 21 01 Bd
zHk6=f 41 21 01 BdzHk51=f 41 21 01 Bd
noitrotsiDcinomraHlatoT DHT V,zHk1=f o tupniedomtalfllataV0.1= 20.0 1.0 %egatloVesioNtuptuO V ON zHk03otzH01,.F.P.B,trohstupni,talfllA 7 04 V
metI 1WS 2WS 3WS 4WS 5WS 6WS 7WS 8WS 9WS 01WS snoitidnoCoccI 1 F F F F F F F 2 1
GV 2 F F F F F F F 1 1 V,zHk1=f NI Bd01=1TSOOB 2 B F F F F F F 1 1 zH06=f2TSOOB 2 F B F F F F F 1 1 zH051=f3TSOOB 2 F F B F F F F 1 1 zH004=f4TSOOB 2 F F F B F F F 1 1 zHk1=f5TSOOB 2 F F F F B F F 1 1 zHk5.2=f6TSOOB 2 F F F F F B F 1 1 zHk6=f7TSOOB 2 F F F F F F B 1 1 zHk51=f
1TUC 2 C F F F F F F 1 1 zH06=f2TUC 2 F C F F F F F 1 1 zH051=f3TUC 2 F F C F F F F 1 1 zH004=f4TUC 2 F F F C F F F 1 1 zHk1=f5TUC 2 F F F F C F F 1 1 zHk5.2=f6TUC 2 F F F F F C F 1 1 zHk6=f7TUC 2 F F F F F F C 1 1 zHk51=f
DHT 2 F F F F F F F 1 1 V0.1=oV,zHk1=f
V ON 2 F F F F F F F 2 2
LA3607
No.22773/6
Test Circuit
Equivalent Circuit Block Diagram
Sample Application Circuit
LA3607
No.22774/6
fo (resonance frequency)In the sample application circuit, fo for each of 7 bands is set as follows :
fo=60Hz, 150Hz, 400Hz, 1kHz, 2.5kHz, 6kHz, 15kHzfo is calculated using the following formula.
fo=
Q (quality factor)Q is calculated using the following formula.
When Q is increased, the frequency band affected by the resonance circuit is narrowed and a clear distinction be-tween this band and adjacent band is provided, but the frequency response swells greatly at all boost mode and thepeak of the composite frequency is lowered. The above must be considered to fix C1, C2.
Description of external partsC1, C2 : Capacitors used to fix fo (resonance frequency)C3 : Input capacitor. Decreasing the capacitor value lowers the frequency response at low frequencies.C4 : Decoupling capacitor. Decreasing the capacitor value makes the effect of power supply stronger, whereby
repple is liable to occur.C5 : Power capacitor.C6 : Putput capacitor. Decreasing the capacitor value lowers the frequency response at low frequencies.
Proper cares in using IC Maximum supply voltage VCC max 20V must not be exceeded. The operating voltage is in the range of 5 to 15V. Application of power with the pin-to-pin spaces shorted causes breakdown or deterioration of the IC to occur.
When mounting the IC on the board of applying power, make sure that the pin-to-pin spaces are not shorted withsolder, etc.
Sample Printed Circuit Pattern (Cu-foilde side)
12 p C1 C2 R1 R2
C1 R2C2 R1
Q=
LA3607
No.22775/6
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guaranteesof the performance, characteristics, and functions of the described products as mounted in the customer'sproducts or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment.SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and allsemiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,or that could cause damage to other property. When designing equipment, adopt safety measures sothat these kinds of accidents or events cannot occur. Such measures include but are not limited to protectivecircuits and error prevention circuits for safe design, redundant design, and structural design.In the event that any or al l SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations,such products must not be expor ted without obtaining the expor t l icense from the authorit iesconcerned in accordance with the above law.No part of this publication may be reproduced or transmitted in any form or by any means, electronic ormechanical, including photocopying and recording, or any information storage or retrieval system,or otherwise, without the prior written permission of SANYO Electric Co. , Ltd. Any and all information described or contained herein are subject to change without notice due toproduct/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is notguaranteed for volume production. SANYO believes information herein is accurate and reliable, butno guarantees are made or implied regarding its use or any infringements of intellectual property rightsor other rights of third parties.
This catalog provides information as of January, 2000. Specifications and information herein are subject to change without notice.
LA3607
PS No.22776/6
This datasheet has been download from:
www.datasheetcatalog.com
Datasheets for electronics components.