Page 1VisaLighting.com800-788-VISA

Rev: 2020/03/12

KT2200-W SERIES CATENA™

Configurable Segments – White LED

W = Width OAH = Overall Height X = Body Height L = Length

DIMENSIONS

W 2” (51 mm)X 3-5/8” (92 mm)L See chart on page 2OAH 9 24” (610 mm)

FEATURES

• Remote driver required • Factory submittal drawing required. Power supply drops determined

per submittal• Lambertian uplight and downlight distribution• Independently switched uplight and downlight output• Optional 90+ CRI• Extruded aluminum body with cast endcaps• Extruded acrylic lenses• No VOC powder coat paint finish• ETL listed for damp locations. Not suited for exterior applications

VisaLighting.com/products/Catena

Type: Location:Project:

OAH is the distance (in inches) from the bottom of the fixture to the ceiling plane. Example - OAH(24) indicates an overall fixture height of 24"

PHOTOMETRICSRELATIVE SCALE DRAWING

90˚

60˚

30˚

120˚

150˚

180˚

0˚

5 Year WarrantyETL Listed

OAH MUST BE SPECIFIED

W

L

X

OAH

Door Height = 7'Ceiling Height = 9'Silhouette Height = 6'

2' length shown

VisaLighting.com800-788-VISA Page 2

Rev: 2020/03/12

Fill in shaded boxes using information listed below

FINISH 7AG7038BMATBRNZBSILCVBLCW9001GLIMGSILGW9002HTHRJB9005OBRZPB1035RUSTSUNGTW9016

MODEL 1

KT2200-W SERIES CATENA (cont.) Configurable Segments – White LED

–

VOLTAGE 4MVOLT347V

OPTION 8CRD

OAH 9Max OAH 24”

SOURCE OPTION 590CRRMD

DIMMING CONTROL6

DALILDE1MLS2XSR

UPLIGHT SOURCE 2L30K(L), (H)L35K(L), (H)L40K(L), (H)

DOWNLIGHT SOURCE 3L30K(L), (H)L35K(L), (H)L40K(L), (H)

MODEL 1 (Select one) UPLIGHT 2 (Select one) DOWNLIGHT 3 (Select one) VOLTAGE 4 (Select one)

MVOLT fixture accepts 120 through 277 input voltageDimmable 0-10V to 1% and minimum 80CRI, within 3-step MacAdam

Model Number Description Source* Dimensions

KT2202-W 2' end model See Below L 26-1/2" (673 mm)

KT2204-W 4' end model See CP2204-W L 48-1/2" (1232 mm)

KT2206-W 6' end model See CP2206-W L 71" (1803 mm)

KT2208-W 8' end model See CP2208-W L 92-1/2" (2350 mm)

KT2212-W 2' mid-run model See Below L 26-1/2" (673 mm)

KT2214-W 4' mid-run model See CP2214-W L 48-1/2" (1232 mm)

KT2216-W 6' mid-run model See CP2216-W L 71" (1803 mm)

KT2218-W 8' mid-run model See CP2218-W L 92-1/2" (2350 mm)

*See CP models for source, lumens and watts

Options continued on Page 3

2’ MODELS

Source CCT Range Delivered Lumens Power (Watts) Voltage

UP L30K(L) 3000K 1000 9

MVOLT, 347V

UP L30K(H) 3000K 1400 14

DOWN L30K(L) 3000K 900 9

DOWN L30K(H) 3000K 1400 14

UP L35K(L) 3500K 1000 9

UP L35K(H) 3500K 1500 14

DOWN L35K(L) 3500K 950 9

DOWN L35K(H) 3500K 1400 14

UP L40K(L) 4000K 1000 9

UP L40K(H) 4000K 1500 14

DOWN L40K(L) 4000K 950 9

DOWN L40K(H) 4000K 1400 14

CCT must match for uplight and downlightUplight and downlight controlled separately

Minimum 80CRI is standard if option is not selected

Page 3VisaLighting.com800-788-VISA

Rev: 2020/03/12

KT2200-W SERIES CATENA (cont.) Configurable Segments – White LED

OPTION 8

CRD (Color) (BLU) Blue, (GRY) Gray. White cord is standard if option is not selected

Powder Coat Painted Finishes (Standard)

AG7038 Agate Grey CVBL Cove Blue GW9002 Grey White PB1035 Pearl Beige

BMAT Bronze Matte CW9001 Cream HTHR Heather RUST Rust

BRNZ Bronze GLIM Glimmer JB9005 Jet Black SUNG Sungold

BSIL Blade Silver GSIL Graphite Silver OBRZ Old Bronze TW9016 Traffic White

FINISHES 7 Specify color code when ordering. For accurate color matching, individual paint and finish samples are available upon request

For more information about our finishes visit visalighting.com/finishes

DIMMING CONTROL OPTION 6 (Select one)

� Option availability may be interdependent with Voltage, Source or Other Options

DALI Dimming control (to 1%) via DALI protocol (not available with 347V)

LDE1 Lutron Hi-Lume dimming control (to 1% with soft-on and fade-to-black) (not available with 347V)

MLS2 Dual-level switching (100%, 50%, off) (not available with 347V)

XSR Dimming control (to 5%) via Phillips Xitanium Sensor Ready protocol (not available with 347V)

SOURCE OPTION 5

Minimum 80CRI within 3-step MacAdam is standard if option is not selected

90CRI Color rendering index minimum 90; minimum R9 value of 50 (delivered lumens reduced by 15%)

RMD Remote mounted driver (required) (Consult Factory)

End ModelMid-run Model

VisaLighting.com800-788-VISA Page 4

Rev: 2020/03/12

KT2200-W SERIES CATENA (cont.) Configurable Segments – White LED

This document contains information which is the property of Visa Lighting, and may not, in whole or in part, be duplicated, disclosed, or used for design or manufacturing purposes without the prior written permission of Visa Lighting. ©Visa Lighting. Design Modification Rights Reserved.

CATENA PRODUCT FAMILY List as of 03/2020 – check our website for updates

White LED

• CP2204-W — 4’ White LED

• CP2206-W — 6’ White LED

• CP2208-W — 8’ White LED

Tunable

• CP2204-T — 4’ Tunable

• CP2206-T — 6’ Tunable

• CP2208-T — 8’ Tunable

Configurable Segments

• KT2200-T Series — Configurable Segments — Tunable

See Visalighting.com/Catena for more information