Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
DailySplit_KSK [daily task 00:02] T:\Cr5000_outdata\slowHourly\KSK_RFYYDOY.dat
DailySplit_KSS [daily task 00:03] T:\Cr5000_outdata\slowHourly\KSS_RFYYDOY.dat
OTAGO I:\YYYY\London\$site and NetCDF to
dataBridge01: A:\data\YYYY\London\$level\$site\DAY\$DOY
GAS-LAS-WXT-Ceil [hh:11] • grab hourly WXT data from both roofs to \WXT510\RAW\MM\WXTYYYYDOY_HH_raw.txt • translate hourly WXT data formatted raw data \WXT510\FORMAT_L0\WXTYYYYDOY_HH.txt \WXT510\FORMAT_L1\WXTYYYYDOY_HH.txt • write hourly WXT 5s data to databridge01 • grab Rad & RG data to \CR5000\KSK_RFYYDOY.dat \CR5000\KSS_RFYYDOY.dat
LoggerNet KSK Mast 10_09_10.CR5
Q:\CR5000\Fast\CR5000_Slow.dat
ROOF8
COMCAP4 Q:\WXT510\wxt-YYYYMMDD-HH00.txt
CR3000 Data
Logger
KSK-Mast Instruments
wires
CNR4 Kup, Kdn, Lup, Ldn, TCNR1
WXT510 T, U, p, RH, RR
ARG100 [RR]
LoggerNet KSS tower 01_09_10.CR5 C:\CR5000\CR5000_slow.dat
ROOF13 (C is T on Otago)
C:\WXT510\
bin\WXT510.pyc stores data to
data\WXT-YYYYMMDD-HH00.txt
CR5000 Data
Logger
KSS-Mast Instruments
wires
CNR1 Kup, Kdn, Lup, Ldn, TCNR1
WXT510 T, U, p, RH, RR
SKU420/5 [UVA]
SKU430 [UVB]
SKL2620/5 [PAR]
Troubleshoot
LoggerNet KSS Tower 19_11_09.CR5 S:\CR5000\CR5000_slow.dat
ROOF12
CR5000 Data
Logger
KSS45W Instruments
wires
PIR [Ldown]
ARG [RR ]
SKU420/5 [UVA]
SKU430 [UVB]
SKL2620/5 [PAR]
PSP [Kdown]
LHRdat [half hourly task, hh:28, hh:58] Grab LHR data and save to daily file
I:\YYYY\London\ALL\LHR_EGLL\EGLLYYYYDOY.txt
DATA COLLECTION
WXTDataPro_V2.R [01:20]
/home/micromet/Roofprograms/WXT/WXTDataPro_V2.R
• L0: convert KSK, KSS and NDT WXT data into netcdf • L1: check data on physically reasonable thresholds and correct wind direction to BNG north • with temporal resolutions 5sec, 1min, 5min, 10 min, 30min • Output saved to respective DAY directory on dataBridge01
DATA POCESSING Data02 Scripts in /home/micromet/Roofprograms dataBridge01 on /media/micromet/data
RadRainNcdf.m [02:00~]
/D drive on Otago:/Roof/Rad_Rain/RadRainNcdf.m (mergeARG.sh and mergeRAD.sh on Data02/home/micromet/script/cronJobs/)
• L0: converts radiation (CNR4 KSK, CNR1/Skye KSS, SPN1 & Eppleys/Skye KSS45W) and ARG100 data into netcdf • Higher Levels: Please refer to the KUMA Manual
http://geography.kcl.ac.uk/micromet/Manuals/Manual_KUMA.pdf
PlotMetObs.sh [03:55]
/home/micromet/Roofprograms/WXT/PlotMertObs.sh
• Use Matlab program PlotMetObs.m to generate eps plots for WXT data and radiation, combining all instruments from all sites
• Convert to png via gnuplot and save to /media/micromet/works/$YEAR/London/Level_1/MetObs • ftp png plots MetObs.png and RadObs.png to web
WXTgapFill.R [run on demand...]
/home/micromet/Roofprograms/WXT/WXTgapFill.R
• L2: gap fill WXT data from KSK and KSS by a) Linear interpolation b) readings from alternative site c) predicted value
ARG100 • Tipping bucket: precipitation [mm]
WXT510 • 2D-sonic: horizontal wind speed [m/s], wind direction [ °] • RAINCAP (counts hits by raindrops): precipitation [mm] • BAROCAP (capacitive silicon sensor ): barometric pressure [hPa] • THERMOCAP (capacitive ceramic sensor): air temperature [°C] • HUMICAP (capacitive thin film polymer): relative humidity [%]
CNR4 • CM3up: shortwave incoming radiation [W/m2] • CM3dn: shortwave outgoing radiation [W/m2] • CG3up: longwave incoming radiation [W/m2] • CG3dn: longwave outgoing radiation [W/m2] • PT100: housing temperature [K]
back KSK
back
Po
wer
(r
ed)
IX1 IXR
Gro
un
d (
bla
ck)
CM
3u
p s
ign
al +
(re
d)
1H 1L
CM
3u
p s
ign
al -
(b
lue)
CM
3d
n s
ign
al +
(w
hit
e)
2H 2L C
M3
dn
sig
nal
- (
bla
ck)
CG
3u
p s
ign
al +
(gr
ey)
3H 3L
CG
3u
p s
ign
al -
(ye
llow
)
CG
3d
n s
ign
al +
(b
row
n)
4H 4L
CG
3d
n s
ign
al -
(gr
een
)
PT1
00
sig
nal
+ (
yello
w)
8H 8L
PT1
00
sig
nal
- (
gree
n)
CNR4
SDI-
Sign
al (
blu
e)
2
Serial-to-USB
3 5
SDI-
Sign
al (
wh
ite)
Sign
al g
rou
nd
(gr
een
)
Po
wer
(b
row
n)
- +
Gro
un
d (
no
)
WXT510
Sign
al (
bla
ck)
P1 Si
gnal
gro
un
d (
bla
ck)
ARG100
KSK
ARG100 • Tipping bucket: precipitation [mm]
WXT510 • 2D-sonic: horizontal wind speed [m/s], wind direction [ °] • RAINCAP (counts hits by raindrops): precipitation [mm] • BAROCAP (capacitive silicon sensor ): barometric pressure [hPa] • THERMOCAP (capacitive ceramic sensor): air temperature [°C] • HUMICAP (capacitive thin film polymer): relative humidity [%]
UV/PAR [μmol/m2s1 and W/m2] • SKU420: UVA • SKU430: UVB • SKL2620: PAR (Photosynthetic active radiation)
CNR1 • CM3up: shortwave incoming radiation [W/m2] • CM3dn: shortwave outgoing radiation [W/m2] • CG3up: longwave incoming radiation [W/m2] • CG3dn: longwave outgoing radiation [W/m2] • PT100: housing temperature [K]
back KSS
back
Po
wer
fo
r U
V/P
AR
(re
d)
G 5V
Gro
un
d f
or
UV
/PA
R (
bla
ck)
Po
wer
(r
ed)
IX1 IXR
Gro
un
d (
blu
e)
UV
A s
ign
al (
yell
ow
)
5H 5L
UV
A s
ign
al g
rou
nd
(gr
ee
n)
UV
B s
ign
al (
bro
wn
)
6H 6L
UV
B s
ign
al g
rou
nd
(p
urp
le)
7H
Qu
antu
m (
blu
e)
CM
3u
p s
ign
al +
(re
d)
1H 1L
CM
3u
p s
ign
al -
(b
lue)
CM
3d
n s
ign
al +
(w
hit
e)
2H 2L C
M3
dn
sig
nal
- (
bla
ck)
CG
3u
p s
ign
al +
(p
urp
le)
3H 3L
CG
3u
p s
ign
al -
(ye
llow
)
CG
3d
n s
ign
al +
(b
row
n)
4H 4L
CG
3d
n s
ign
al -
(gr
een
)
PT1
00
sig
nal
+ (
yello
w)
8H 8L
PT1
00
sig
nal
- (
gree
n)
SDI-
Sign
al (
blu
e)
2
Serial-to-USB
3 5
SDI-
Sign
al (
wh
ite)
Sign
al g
rou
nd
(gr
een
)
Po
wer
(b
lack
)
G 12V
Gro
un
d (
red
)
CNR1
WXT510 UV/PAR
KSS
ARG100 • Tipping bucket: precipitation [mm]
UV/PAR [μmol/m2s1 and W/m2] • SKU420: UVA • SKU430: UVB • SKL2620: PAR (Photosynthetic active radiation)
CNR1 • CM3up: shortwave incoming radiation [W/m2] • CM3dn: shortwave outgoing radiation [W/m2] • CG3up: longwave incoming radiation [W/m2] • CG3dn: longwave outgoing radiation [W/m2] • PT100: housing temperature [K]
back KSS45W
KSS45W
CR3000
Datalogger
Eppley PIR CH 5 +
CH 5 -
Single ended
channel 11
VX 1
10k Resistor
GND
GND
VX 2
Single ended
channel 12
10 k Resistor
Eppley PSP
GND
CH 4
-
CH 4 +
Rain gauge
GND
P1
SPN1 sunshine
Pyranometer
CH 8 +
CH 9 +
CH 9 -
GND
+12 V
GND
CH 10 +
+ 12 V
GND
CH 10 –
10 k Resistor + 5 V
CH 8 -
next
next
next
back
Conversion of measured Voltage into meteorological parameters by SimpleTowerProgram
Short-wave in: VoltDiff(CM3Up,1,mV20,1,True,0,_50Hz,88.1057,0)
Short-wave out: VoltDiff(CM3Dn,1,mV20,2,True,0,_50Hz,88.1057,0)
Long-wave in: VoltDiff(CG3Up,1,mV20,3,True,0,_50Hz,88.1057,0)
Long-wave out: VoltDiff(CG3Dn,1,mV20,4,True,0,_50Hz,88.1057,0)
UVA: VoltDiff(UVAv,1,mV5000,5,True,0,_50Hz,1.0,-0.03)
UVAW=UVAv* 0.02082
UVAm=UVAv* 0.059666
UVB: VoltDiff(UVBv,1,mV1000,6,True,0,_50Hz,1.0,0.14)
UVBW=UVBv* 0.014755
UVBm=UVBv* 0.036523
Quantum: VoltSe(Quantumv,1,mV5000,13,True,0,_50Hz,1.0,0.08)
QuantumW=Quantumv* 0.11926
Quantumm=Quantumv* 0.59988
CNR1 Temperature: Resistance(CNR1TK,1,mV200,8,Ix1,1,1675,True,True,200,250,0.01,0)
PRT(CNR1TK,1,CNR1TK,1,273.15)
CNR1TC=CNR1TK-273.15
Net Radiation: NetR=(CM3Up-CM3Dn)+(CG3Up-CG3Dn)
Precipitation PulseCount(RainTips,1,2,2,0,1,0)
back
WXT 510 Mean Data File Convention Who: Duick Young 22/7/07 File convention for data files stored in W:\KCLroof\YYYY\WXT510\MM\ File name structure WXTYYYYDDD_15.txt. File Convention started 16th July 2007 (DOY 2197) Flags added 6th August 2007 (DOY 218) Generated by: MATLAB using WXTmeanplot#.m Column Variable Units 1 Day of Year (DOY) 2 Decimal Time 3 Hour 4 Minute 5 Number of Samples 6 Wind Speed Minimum m s-1 7 Wind Speed Mean m s-1 8 Wind Speed Maximum m s-1 9 Air Temperature °C 10 Relative Humidity % 11 Air Pressure hPa 12 U (Wind Component) m s-1 13 V (Wind Component) m s-1 14 Wind Direction ° 15 Total Rain Accumulation mm 16 Total Rain Duration s 17 Total Hail Accumulation hits cm-2 18 Total Hail Duration s 19 Standard Deviation – Wind Speed Minimum m s-1 20 Standard Deviation – Wind Speed Mean m s-1 21 Standard Deviation – Wind Speed Maximum m s-1 22 Standard Deviation – Air Temperature °C 23 Standard Deviation – Relative Humidity % 24 Standard Deviation – Air Pressure hPa 25 Standard Deviation – U m s-1 26 Standard Deviation – V m s-1 27 Flag Flags 1 Data fine 5 Less than 90 data lines in 15 minute averaging period 6 No data present during 15 minute averaging period
CNR1 Mean Data File Convention Who: Duick Young 23 March 2009 File convention for data files stored in ...\KCLroof\YYYY\CR5000\ File name structure RFYYDDD.dat File convention started: 18th August 2008 (DOY 231) Generated by: Simple Tower Program _V1.1.CR3 Column Variable Units 1 Year 2 Month 3 Day 4 Hour 5 Minute 6 Kdn- Average W m-2 7 Kdn-- Standard Deviation W m-2 8 Kup - Average W m-2 9 Kup - Standard Deviation W m-2 10 Ldn-- Average W m-2 11 Ldn-- Standard Deviation W m-2 12 Lup - Average W m-2 13 Lup - Standard Deviation W m-2 14 CNR1 Temperature - Average °C 15 CNR1 Temperature – StDev ° C 16 CNR1 Temperature – Average K 17 CNR1 Temperature – StDev K 18 Net Radiation – Average W m-2 19 Net Radiation – StDev W m-2 20 UVA – Average μmol m-2 s-1 21 UVB – Average μmol m-2 s-1 22 Quantum (PAR) – Average μmol m-2 s-1 23 UVA – Average W m-2 24 UVB – Average W m-2 25 Quantum (PAR) – Average W m-2 26 UVA - Standard Deviation μmol m-2 s-1 27 UVB - Standard Deviation μmol m-2 s-1 28 Quantum (PAR) – StDev μmol m-2 s-1 29 Quantum (PAR) – StDev μmol m-2 s-1 30 Tipping Bucket Rain Gauge mm
back
WXT 510/CNR1 Mean Data File Convention
Who: Duick Young 6 Aug 2007
File convention for data files stored in W:\KCLroof\YYYY\WXT510\MM\
File name structure LRYYYYDDD_15.txt.
File Convention started 25th July 2007 (DOY 206)
Flag (Column 27) added 3rd August 2007 (DOY 214)
Tipping Bucket Raingauge added 18 August 2008 (DOY 231)
Generated by: MATLAB using WXTmeanplot#.m
Column Variable Units
1 Day of Year (DOY)
2 Decimal Time
3 Hour
4 Minute
5 Number of Samples
6 Wind Speed Minimum m s-1
7 Wind Speed Mean m s-1
8 Wind Speed Maximum m s-1
9 Air Temperature °C
10 Relative Humidity %
11 Air Pressure hPa
12 U (Wind Component) m s-1
13 V (Wind Component) m s-1
14 Wind Direction°
15 Total Rain Accumulation mm
16 Total Rain Durations
17 Total Hail Accumulation hits cm-2
18 Total Hail Durations
19 StDev – Wind Speed Minimum m s-1
20 StDev– Wind Speed Mean m s-1
21 StDev– Wind Speed Maximum m s-1
22 StDev– Air Temperature °C
23 StDev– Relative Humidity %
24 StDev– Air Pressure hPa
Column Variable Units 25 StDev– U m s-1 26 StDev– V m s-1 27 Flag 28 K¯ - Average W m-2 29 K¯- Standard Deviation W m-2 30 K↑ - Average W m-2 31 K↑- Standard Deviation W m-2 32 L¯- Average W m-2 33 L¯- Standard Deviation W m-2 34 L↑ - Average W m-2 35 L↑ - Standard Deviation W m-2 36 CNR1 Temperature – Average °C 37 CNR1 Temperature - Standard Deviation °C 38 CNR1 Temperature – Average K 39 CNR1 Temperature - Standard Deviation K 40 Net Radiation – Average W m-2 41 Net Radiation - Standard Deviation W m-2 42 UVA – Average μmol m-2 s-1 43 UVB – Average μmol m-2 s-1 44 Quantum (PAR) – Average μmol m-2 s-1 45 UVA – Average W m-2 46 UVB – Average W m-2 47 Quantum (PAR) – Average W m-2 48 UVA - Standard Deviation μmol m-2 s-1 49 UVB - Standard Deviation μmol m-2 s-1 50 Quantum (PAR) - Standard Deviation μmol m-2 s-1
51 Surface Albedo 52 Rain (Tipping Bucket) mm
Flags 1Data fine 5Less than 90 data lines in 15 minute averaging period 6No data present during 15 minute averaging period
back
TROUBLESHOOT • In case data have been collected by Roof8 or Roof3 but are missing on Otago, grab data with: D:\roof\co2\wxtGasGrabCeilAB_GetMissingData.m (latest version)
1. Adjust time settings in the code • Year • Month • Day • hour_orig (the first hour to be moved) • Nperiods (number of hourly periods in one day – run program separately for each day)
2. check file sizes are correct in I:\YYYY\London\$site\WXT510\FORMAT_L0\WXTYYYYDOY_HH.txt
3. Rerun scripts on data01: /home/micromet/Roofprograms 1) WXT/WXTDataPro.R 2) WXT/PlotMetObs.sh
4. For radiation (CNR’s, SPN1, Eppleys, Skye) and ARG100 dataset
1) Rerun matlab program on Otago D drive:/Roof/Rad_Rain/RadRainNncdf.m 2) Rerun script at data02:/home/micromet/script/cronJobs/ -> mergeARG.sh and
mergeRAD.sh
back