KOM Attach FINAL

ALLIEDMANUFACTURERATTACHMENT DIRECTORY

This directory contains a listing of attachments manufactured by alliedequipment manufacturers which may be used on Komatsu constructionequipment. Several attachments listed in this directory are also includedin the Komatsu Machine Price List or the Allied ManufacturersAttachment supplement to that price list and can be purchased throughKomatsu America International Company. Floor planning and financingare available through Komatsu for attachments purchased from thoseprice lists. Consult the Komatsu Machine Price List or the AlliedManufacturers Attachment supplement for attachment sizes available forspecific Komatsu models.

The sole purpose of this directory is to provide a reference source of thevarious attachments available and the manufacturers who produce them.The listing of an attachment does not imply approval by Komatsu nordoes it suggest the size or model of tool for each Komatsu machine.Retail customers and dealers should contact the allied equipment manu-facturer with questions concerning the proper match of attachment andKomatsu machine for each application. Questions concerning availability,pricing and installation should also be directed to the attachment manu-facturer. Technical information that is required for applications or installa-tions, that is not available through the procedures listed above, can bedirected to Komatsu America International Company through the alliedattachment manufacturer.

The attachments listed in this directory have not been designed, tested,or manufactured by Komatsu Ltd. or Komatsu America InternationalCompany and these companies assume no responsibility for their perfor-mance. The attachment manufacturer and/or selling dealer are solelyresponsible for any failure, personal injury, or property damage causedby the use of this equipment.

As mentioned previously, several attachments listed in this guide arealso included in the Komatsu Machine Price List or the AlliedManufacturers Attachment supplement to that price list. In these casesthe normal machine warranty applies to the Komatsu product while theallied manufacturer’s warranty applies to their product.

The allied attachment information was supplied by the attachment manu-facturers and its accuracy was not verified by Komatsu Ltd. or KomatsuAmerica International Company but merely provided for the convenienceof its dealers and customers as a general depiction and description ofthe attachment and its usage. The actual attachment may vary from theinformation included in this directory, check with the manufacturer for thelatest specifications.

INTRODUCTION

STATEMENT OF LIMITATION AND DISCLAIMER OF RESPONSIBILITY

TABLE OF CONTENTS

Leveler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

Lubrication System . . . . . . . . . . . . . . . . . . . . . . .43

Magnet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

Pile Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

Plows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

Precleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

Processor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

Quick Fill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

Rake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45-47

Ride Control . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

Ripper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47-49

Scale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

Shear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

Snowblower . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

Snow Plow . . . . . . . . . . . . . . . . . . . . . . . . . . .51-53

Spade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

Splitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

Starting Aids . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

Sweeper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

Tire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

Track Pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

Undercarriage . . . . . . . . . . . . . . . . . . . . . . . . . . .55

Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

Winch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

Manufacturer Index . . . . . . . . . . . . . . . . . . .56-86

Attachment Type

Arm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Asphalt Cutter . . . . . . . . . . . . . . . . . . . . . . . . . .2-3

Auger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Backhoe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Bale Clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Barrel Handler . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-7

Boom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-9

Brush Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Bucket

Excavator . . . . . . . . . . . . . . . . . . . . . . . .10-16

Loader . . . . . . . . . . . . . . . . . . . . . . . . . . .17-23

Cab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Chains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Compactor . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Concrete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Controls/Instrumentation . . . . . . . . . . . . . . . . . . .25

Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Conveyor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Coupler . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27-28

Custom Modifications . . . . . . . . . . . . . . . . . . . . .28

Cutting Edge . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Delimber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Emission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Fairlead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Feller Buncher . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Fire Suppression . . . . . . . . . . . . . . . . . . . . . . . . .31

Fork

Fork Log and Lumber . . . . . . . . . . . . . . .31-32

Millyard . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . .34-36

Grade Control . . . . . . . . . . . . . . . . . . . . . . . . . . .36

Grapple . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36-41

Guarding Package . . . . . . . . . . . . . . . . . . . . . . . .41

Hammer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

Harvester . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

Hydraulic Kits . . . . . . . . . . . . . . . . . . . . . . . . . . .42

ATTACHMENT TYPE

CD = Crawler Dozer HE = Hydraulic ExcavatorMG = Motor Grader WL = Wheel Loader

2

BUCKET MOUNTEDSharp-edge disk wheel clamps to bucket. Sharp disk cutsasphalt with downpressure supplied by the machine. Someunits attach to an excavator quick coupler.

Allied Construction Products, Inc.Attachments International, Inc.Guest Industries, Inc.Industrial Machinery Attachment Co. (IMAC)Rockland Manufacturing Co.

HE, WL

ASPHALT CUTTER

ARM

EXTENSIONMounted on arm to extend length. Provides more reach and liftheight.

Paul Wever Construction Equipment Co., Inc.Weldco-Beales Manufacturing Ltd.Werk-Brau Company, Inc.

HE

EXTENDIBLEHydraulically actuated variable length arm. Provides morereach and lift height.

Digmor California

HE

ROTATINGArm can be hydraulically rotated continuously. Use with buck-et, shear, grapple, etc. to eliminate the need for individual rotators.

Pemberton, Inc.

HE

ATTACHMENT TYPE


3

MOLDBOARD MOUNTEDSharp-edge disk wheel mounts on a dozer or motor graderblade. Sharp disk cuts asphalt with downpressure supplied bythe machine.

Allied Construction Products, Inc.Attachments International, Inc.

CD, MG

HYDRAULICUsed for drilling holes in soil. Used in applications such aslandscaping, fence post, sign post, and utility pole installation.

Eskridge, Inc.Lowe Manufacturing Co., Inc.McMillen Construction Equipment Attachments

CD, HE, WL

HYDRAULICThe backhoe mounts to the rear of the machine. Used for dig-ging deep and narrow trenches.The arm swings for loading anddigging.

Ware Machine Works, Inc.

CD, WL

RIPPER/SCARIFIER MOUNTEDSharp-edged disk wheel mounts in place of ripper or scarifiershank. Disk scores asphalt pavement to control the rippingarea.

AtecoAttachments International, Inc.Guest Industries, Inc.

CD, MG

AUGER

BACKHOE

ASPHALT CUTTER (continued)

ATTACHMENT TYPE


4

LOADER MOUNTEDUse with forks to grab onto and handle various size barrels.Manual and or hydraulic available. Single or double barrel han-dler versions available.

ACS Industries, Inc.Industrial Machinery Attachment Co. (IMAC)Weldco-Beales Manufacturing Ltd.

WL

EXCAVATORHydraulically operated rotatable barrel handler. Good forwaste handling applications.

Ajusta-Buckets, Division of QCONLaBounty ManufacturingPemberton, Inc.

HE

HYDRAULICFork for handling large rectangular hay bales. Long taperedspikes enter and exit bales easily. Equipped with clamps tosecure bale to fork.

New Dymax, Inc.

WL

BALE CLAMP

BARREL HANDLER

ATTACHMENT TYPE


LAND CLEARINGPurpose built with angled double beveled or serrated edge forshearing off trees and stumps at ground level. Includes a builtin splitter to split large trees that cannot be sheared in a sin-gle pass. Available as a straight or V blade.

JRB Company, Inc.Rockland Manufacturing Co.Weldco-Beales Manufacturing Ltd.

CD, WL

BACKFILLUsed in place of bucket for backfilling and grading.

Ajusta-Buckets, Division of QCONBateman Manufacturing Craig Manufacturing Ltd.Geith, Inc.Guest Industries, Inc.Industrial Machinery Attachment Co. (IMAC)Rockland Manufacturing Co.Weldco-Beales Manufacturing Ltd.

HE

BANK SLOPERUsed for trimming or sloping ditches and steep banks. Bladeis mounted on or near the moldboard of blade to push /gradematerial on a slope.

Ateco Rockland Manufacturing Co.Weldco-Beales Manufacturing Ltd.

CD, MG

COALThe ends of the blade are angled forward, and the length andheight of the blade are increased in order to increase the car-rying capacity in lighter materials, such as coal.

Bateman Manufacturing Industrial Machinery Attachment Co. (IMAC)Rockland Manufacturing Co.Weldco-Beales Manufacturing Ltd.Young Corporation

CD, WL

BLADE

5

ATTACHMENT TYPE


6

LOADERDozer style blade used to backfill or grade. Usually availablein straight, angling or 6-way tilt versions.

ACS Industries, Inc.Geith, Inc.Henke Manufacturing CorporationIndustrial Machinery Attachment Co. (IMAC)JRB Company, Inc.Pemberton, Inc.Rylind Industries, Inc.Rockland Manufacturing Co.Weldco-Beales Manufacturing Ltd.Young Corporation

U-BLADEThe ends of the blade are angled forward in order to increasethe carrying capacity in loose materials.

Bateman Manufacturing Craig Manufacturing Ltd.Industrial Machinery Attachment Co. (IMAC) Rockland Manufacturing Co.Weldco-Beales Manufacturing Ltd.Young Corporation

CD

LANDFILLThe ends of the blade are angled forward and the moldboardheight is increased with screening in order to increase thecarrying capacity for spreading trash in a sanitary land fill.

Bateman Manufacturing Craig Manufacturing Ltd.Industrial Machinery Attachment Co. (IMAC)Rockland Manufacturing Co.Weldco-Beales Manufacturing Ltd.Young Corporation

CD

WL

BLADE (continued)

ATTACHMENT TYPE


7

UTILITY DOZERFront mounted utility blade for all seasons. Winter, ice andsnow control, backfilling, leveling, windrows, light digging etc.

Craig Manufacturing Ltd.Industrial Machinery Attachment Co. (IMAC)Little Falls Machine, Inc.Rockland Manufacturing Co.Weldco-Beales Manufacturing Ltd.

MG

WOODCHIPSidewalls are added , the ends of the blade are angled forwardand the length and height of the blade are increased in orderto increase the carrying capacity in extra light materials, suchas woodchips.

Bateman Manufacturing Craig Manufacturing Ltd.Industrial Machinery Attachment Co. (IMAC)Rockland Manufacturing Co.Weldco-Beales Manufacturing Ltd.Young Corporation

CD, WL

EXTENDIBLEExcellent for material handling in situations requiring a longreach.

ACS Industries, Inc.Bateman Manufacturing Central Fabricators, Inc.Industrial Machinery Attachment Co. (IMAC)JRB Company, Inc.New Dymax, Inc.Pemberton, Inc.Rockland Manufacturing Co.Rylind Industries, Inc.Weldco-Beales Manufacturing Ltd.

WL

BOOM

BLADE (continued)

ATTACHMENT TYPE


8

FORESTRY, HIGH LIFTBoom and grapple system for shortwood pulp logs. Used tounload trucks and provide maximum stacking height of stockpiles.

Bateman Manufacturing Denharco, Inc.Weldco-Beales Manufacturing Ltd.

WL

SCRAP HANDLING, THREE SECTIONPurpose built boom with greater dexterity than two sectionboom. They are generally used for bin picking, hopper loadingand for unloading barges. Their dexterity also allows them toreach closer to the carrier than a two section boom. Usuallyhas greater lift capacity and working range than standardexcavator front. Available with top or bottom mounted thirdsection cylinder.

Jewell Manufacturing, Inc.Pierce Pacific Manufacturing, Inc.Weldco-Beales Manufacturing Ltd.Young Corporation

HE

LOG LOADINGPurpose built boom used for shovel logging and loading at sort-ing yards or at the road side. Usually has greater lift capacity andworking range than standard excavator fronts. Available with topor bottom mounted stick and heel cylinders.

Jewell Manufacturing, Inc.Pacific Services Manufacturing, Inc. (PSM)Pierce Pacific Manufacturing, Inc.Weldco-Beales Manufacturing Ltd.Young Corporation

HE

BOOM (continued)

ATTACHMENT TYPE


9

SCRAP HANDLING, TWO SECTIONPurpose built boom generally used in fixed loading situationswhere the carrier tends to sit in one spot. They are generallyused for bulk material handling and for feeding crushers orshredders. Usually has greater lift capacity and working rangethan standard excavator front. Available with top or bottommounted second section cylinder.

Bateman Manufacturing Jewell Manufacturing, Inc.Pierce Pacific Manufacturing, Inc.Weldco-Beales Manufacturing Ltd.Young Corporation

HE

SUPER LONG FRONTPurpose built light weight boom used in industrial, govern-mental, construction and mining applications, where anextended working range is required. Used for dredging, land-scaping, sloping, coffer dam and slurry wall construction.

Bateman Manufacturing Jewell Manufacturing, Inc.Pierce Pacific Manufacturing, Inc.Weldco-Beales Manufacturing Ltd.Young Corporation

HE

ROTARY/FLAILRotary or flail type mower that cuts down brush and smalltrees. Useful for clearing along roadways, railways, and utilityrights-of-way.

Bateman Manufacturing Gregory Manufacturing CompanyIndustrial Machinery Attachment Co. (IMAC)Risley Equipment Ltd.Weldco-Beales Manufacturing Ltd.

HE, MG

BRUSH CUTTER

BOOM (continued)

ATTACHMENT TYPE


10

CAST LIPHeavy duty cast lip wear resistant bucket for shot rock ortough and abrasive excavation conditions.

ESCO CorporationGeith, Inc.Hendrix ManufacturingHensley AttachmentsIndustrial Machinery Attachment Co. (IMAC)Pemberton, Inc.Rockland Manufacturing Co.Weldco-Beales Manufacturing Ltd.Werk-Brau Company, Inc.

HE

CLAM SHELLUsed for loading free flowing materials (sand, wheat, etc.),loading logs, handling rocks, pulling stumps and grading asurface.

Ajusta-Buckets, Division of QCONGeith, Inc.Industrial Machinery Attachment Co. (IMAC)Jewell Manufacturing, Inc.Pacific Services Manufacturing, Inc. (PSM)Pemberton, Inc.Pierce Pacific Manufacturing, Inc.Pro-Line/Anvil AttachmentsWeldco-Beales Manufacturing Ltd.Young Corporation

HE

COMPACTION (TAMPING PAD ROLLER)Compaction is accomplished by running the roller, attached tothe bottom of the bucket, over the backfill.

Felco Industries, Ltd.

HE

BUCKET, EXCAVATOR

ATTACHMENT TYPE


11

COMPACTION (VIBRATING HYDRAULIC PLATE)A vibrating hydraulic plate integral to the bucket allows theoperator to place and compact the backfill material while fol-lowing closely behind the pipe laying or similar activity.


HE

CORAL ROCKA shorter tip radius for greater tip forces enables "peeling" typedigging in coral rock. Wear is reduced because of an increasednumber of smaller teeth and the addition of side cutters.

Ajusta-Buckets, Division of QCONESCO CorporationHensley AttachmentsWerk-Brau Company, Inc.

HE

DITCH CLEANINGShallow and wide bucket for forming and cleaning ditches andwater courses, grading and backfilling and loading loosematerial

ACS Industries, Inc.Ajusta-Buckets, Division of QCONAttachments International, Inc.Bateman Manufacturing C&P Enterprises, Inc.Central Fabricators, Inc.Craig Manufacturing Ltd.Entek Manufacturing, Inc.ESCO CorporationGeith, Inc.Hendrix ManufacturingHensley AttachmentsIndustrial Machinery Attachment Co. (IMAC)New Dymax, Inc.Pacific Services Manufacturing, Inc. (PSM)Pemberton, Inc.Rockland Manufacturing Co.Weldco-Beales Manufacturing Ltd.Werk-Brau Company, Inc.Young Corporation

HE

BUCKET, EXCAVATOR (continued)

ATTACHMENT TYPE


12

DROP CENTERThe dropped center design cuts a narrow lower trench bor-dered on both sides by shallower upper trenches. Used fordigging footings as well as pipe bedding. Up to three utilitiescould be laid in the same trench.

ESCO CorporationPemberton, Inc.Weldco-Beales Manufacturing Ltd.Werk-Brau Company, Inc.

HE

JAWMultipurpose bucket that combines the features of a trenchingbucket with a clamshell and grader.

Geith, Inc.Woods Equipment Company

HE

NARROW TRENCHThe narrow bucket width allows for deep excavation, and alsofor digging narrow ditches and hard soil.

Attachments International, Inc.Geith, Inc.

HE

PAVEMENT REMOVALDesigned for removing and loading pre-cut or broken pave-ment. The inclined sides aid in prying the pavement free.

Ajusta-Buckets, Division of QCONAttachments International, Inc.Geith, Inc.Rockland Manufacturing Co.Werk-Brau Company, Inc.

HE


ATTACHMENT TYPE


13

PLATE LIP, HEAVY DUTYHeavy duty plate lip bucket for general excavation and truckloading in compact soils, dense clay, gravel or moderate rockconditions.

ACS Industries, Inc.Ajusta-Buckets, Division of QCONBateman Manufacturing C&P Enterprises, Inc.Central Fabricators, Inc.Charles Machine, Inc.Craig Manufacturing Ltd.Entek Manufacturing, Inc.ESCO CorporationGeith, Inc.Hendrix Manufacturing Hensley AttachmentsIndustrial Machinery Attachment Co. (IMAC)New Dymax, Inc.Pacific Services Manufacturing, Inc. (PSM)Pemberton, Inc.Pro-Line/Anvil AttachmentsRockland Manufacturing Co.Weldco-Beales Manufacturing Ltd.Werk-Brau Company, Inc.

HE


ATTACHMENT TYPE


14

RIPPERRipper teeth are positioned on a constant radius around theback and bottom sides of a bucket for excavating frozenground, sandstone, limestone, caliche, shale and coral.

Bateman Manufacturing ESCO CorporationPemberton, Inc.Woods Equipment Company

HE

ROUNDThe curved bottom cuts a trench which cradles the lowerquarter of the pipe. The shape also aids in sloping the trench.

Attachments International, Inc.Central Fabricators, Inc.Hensley Attachments

HE

PLATE LIP, STANDARD DUTYStandard duty plate lip bucket for general excavation and truckloading in loam or sandy soils containing very little rock.

ACS Industries, Inc.Ajusta-Buckets, Division of QCONAttachments International, Inc.Bateman Manufacturing Central Fabricators, Inc.Charles Machine, Inc.Entek Manufacturing, Inc.ESCO CorporationGeith, Inc.Hendrix ManufacturingHensley AttachmentsIndustrial Machinery Attachment Co. (IMAC)New Dymax, Inc.Pemberton, Inc.Pro-Line/Anvil AttachmentsRockland Manufacturing Co.Werk-Brau Company, Inc.

HE


ATTACHMENT TYPE


15

THUMB Use with a bucket to grasp and hold objects or loose materials,gather and load logs, build logging roads, pull stumps, stackand load debris, demolish structures, grub, handle rocks andload trucks. Hydraulically operated thumb allows clamping overthe full range of bucket movement. Fixed prop clamp relies onthe clamping action of the bucket to hold material. Available inlink and no link designs.

Ajusta-Buckets, Division of QCONAmulet Manufacturing Co., Inc.Attachments International, Inc.Bateman Manufacturing C&P Enterprises, Inc.Central Fabricators, Inc.Charles Machine, Inc.Craig Manufacturing Ltd.Entek Manufacturing, Inc.ESCO CorporationGeith, Inc.Hensley AttachmentsIndustrial Machinery Attachment Co. (IMAC)Jewell Manufacturing, Inc.Mann CorporationNew Dymax, Inc.Pacific Services Manufacturing, Inc. (PSM)Pemberton, Inc.Progressive Attachments Corporation (PAC)Rockland Manufacturing Co.Weldco-Beales Manufacturing Ltd.Werk-Brau Company, Inc.Woods Equipment Company

HE

SAND/FLAT BOTTOMSloped side wall design helps minimize side wall collapse whentrenching in sandy soils.

Ajusta-Buckets, Division of QCONAttachments International, Inc.Werk-Brau Company, Inc.

HE


ATTACHMENT TYPE


16

TRAPEZOIDALSpecifically designed for digging ditches to a desired depthand slope. Long side cutting edges grade the slopes as itdigs. Eliminates wasted digging cycles. Available in any widthand slope desired.

Ajusta-Buckets, Division of QCONAttachments International, Inc.Charles Machine, Inc.Geith, Inc.Industrial Machinery Attachment Co. (IMAC)Pemberton, Inc.Rockland Manufacturing Co.Weldco-Beales Manufacturing Ltd.Werk-Brau Company, Inc.

HE

V-LINE FROST Specially designed for excavating frozen ground or layered rock.The bucket shape concentrates digging forces at one point.

ESCO CorporationHensley Attachments Industrial Machinery Attachment Co. (IMAC) Weldco-Beales Manufacturing Ltd.Werk-Brau Company, Inc.

HE

TILTINGShallow and wide bucket tilts side to side for forming andcleaning ditches and water courses, grading, backfilling orcutting sloped trenches.

Bateman Manufacturing Craig Manufacturing Ltd.Geith, Inc.Industrial Machinery Attachment Co. (IMAC)JRB Company, Inc.Pemberton, Inc.Rockland Manufacturing Co.Weldco-Beales Manufacturing Ltd.Werk-Brau Company, Inc.

HE


ATTACHMENT TYPE


17

BUCKET, LOADER

COAL/LIGHT MATERIALLarge capacity bucket for handling coal, dry loam or any lightmaterial.

ACS Industries, Inc.Ajusta-Buckets, Division of QCONBateman Manufacturing Central Fabricators, Inc.Charles Machine, Inc.Craig Manufacturing Ltd.Hensley AttachmentsIndustrial Machinery Attachment Co. (IMAC)JRB Company, Inc.New Dymax, Inc.Pacific Services Manufacturing, Inc. (PSM)Pemberton, Inc.Rockland Manufacturing Co.Rylind Industries, Inc.Weldco-Beales Manufacturing Ltd.Werk-Brau Company, Inc.Wicker Machine Company

WL

DEMOLITION (ROCK GRAPPLE)Heavily guarded for use in quarry operations and demolitionwork. The clamp is designed to handle large rocks where sort-ing and sizing are required.

Pro-Line/Anvil AttachmentsRockland Manufacturing Co.Weldco-Beales Manufacturing Ltd.

WL

EJECTOREquipped with a hydraulically actuated rear plate which ejectssticky material. The bucket can also be dumped without usingthe ejector.

Rockland Manufacturing Co.

WL

ATTACHMENT TYPE


18

GENERAL PURPOSEExcellent for most applications, such as digging soil and re-handling soil, sand, aggregate and a variety of other common-ly handled materials.

ACS Industries, Inc.Bateman Manufacturing Central Fabricators, Inc.Charles Machine, Inc.Craig Manufacturing Ltd.Geith, Inc.Hensley Attachments Industrial Machinery Attachment Co. (IMAC) JRB Company, Inc.New Dymax, Inc.Pacific Services Manufacturing, Inc. (PSM) Pemberton, Inc.Rockland Manufacturing Co.Rylind Industries, Inc.Weldco-Beales Manufacturing Ltd.Werk-Brau Company, Inc.Wicker Machine Company

WL

GRAPPLEHydraulically actuated grapple is used to hold extra light orbulky materials in the bucket.

ACS Industries, Inc.Bateman Manufacturing Industrial Machinery Attachment Co. (IMAC) JRB Company, Inc.New Dymax, Inc.Pemberton, Inc.Rockland Manufacturing Co.Rylind Industries, Inc.Tink, Inc.Weldco-Beales Manufacturing Ltd.Werk-Brau Company, Inc.

WL

BUCKET, LOADER (continued)

ATTACHMENT TYPE


19

HIGH DUMPCylinders mounted in the bucket subframe hydraulically liftthe back of the bucket adding dump height and reach to yourloader.

Bateman Manufacturing Craig Manufacturing Ltd.Geith, Inc.Industrial Machinery Attachment Co. (IMAC)New Dymax, Inc.Pemberton, Inc.Rockland Manufacturing Co.Rylind Industries, Inc.Tink, Inc.Weldco-Beales Manufacturing Ltd.

WL

HOT SLAGConstructed to withstand the extreme heat and abrasion ofhot slag removal in steel mills.

ACS Industries, Inc.Charles Machine, Inc.Craig Manufacturing Ltd.Geith, Inc.Rockland Manufacturing Co.

WL

LANDFILLHigh-back, shallow bucket with a high spill screen or trashguard.

Charles Machine, Inc.Craig Manufacturing Ltd.Pemberton, Inc.Rockland Manufacturing Co.

WL


ATTACHMENT TYPE


20

MULTIPURPOSECombines the features of a general purpose bucket with aclamshell, dozer and scraper.

ACS Industries, Inc.Bateman Manufacturing Craig Manufacturing Ltd.Geith, Inc.Industrial Machinery Attachment Co. (IMAC)JRB Company, Inc.New Dymax, Inc.Pemberton, Inc.Rockland Manufacturing Co.Rylind Industries, Inc.Weldco-Beales Manufacturing Ltd.Werk-Brau Company, Inc.

WL

OVER THE FORKDesigned to engage fork tines so bucket can be utilized with-out removing forks.

Craig Manufacturing Ltd.Rockland Manufacturing Co.Weldco-Beales Manufacturing Ltd.Wicker Machine Company

WL

ROCK, SKELETONUsed for sorting or grading shot rock.

ACS Industries, Inc.Craig Manufacturing Ltd.Industrial Machinery Attachment Co. (IMAC)JRB Company, Inc.Pemberton, Inc.Pro-Line/Anvil AttachmentsRockland Manufacturing Co.Weldco-Beales Manufacturing Ltd.Werk-Brau Company, Inc.

WL


ATTACHMENT TYPE


21

ROCK, SPADE NOSEHigh strength wear resistant bucket with V-shaped cuttingedge for improved penetration when handling shot rock ordigging in severe applications.

ACS Industries, Inc.Bateman Manufacturing Charles Machine, Inc.Craig Manufacturing Ltd.Geith, Inc.Hensley AttachmentsIndustrial Machinery Attachment Co. (IMAC)JRB Company, Inc.New Dymax, Inc.Pacific Services Manufacturing, Inc. (PSM)Pemberton, Inc.Pro-Line/Anvil AttachmentsRockland Manufacturing Co.Rylind Industries, Inc.Weldco-Beales Manufacturing Ltd.Werk-Brau Company, Inc.

WL

ROCK, STRAIGHT EDGEHigh strength wear resistant bucket for handling shot rock.

ACS Industries, Inc.Bateman Manufacturing Charles Machine, Inc.Craig Manufacturing Ltd.Geith, Inc.Hensley AttachmentsIndustrial Machinery Attachment Co. (IMAC)JRB Company, Inc.New Dymax, Inc.Pemberton, Inc.Pro-Line/Anvil AttachmentsRockland Manufacturing Co.Weldco-Beales Manufacturing Ltd.Werk-Brau Company, Inc.

WL


ATTACHMENT TYPE


22

SIDE DUMPPermits side dumping to reduce maneuvering requirementsand time.

ACS Industries, Inc.Bateman Manufacturing Craig Manufacturing Ltd.Industrial Machinery Attachment Co. (IMAC)JRB Company, Inc.Pemberton, Inc.Rylind Industries, Inc.Weldco-Beales Manufacturing Ltd.

WL

SNOW/BASKETOversized, light weight bucket for clearing and loading snow.

ACS Industries, Inc.Ajusta-Buckets, Division of QCONBateman Manufacturing Charles Machine, Inc.Craig Manufacturing Ltd.Henke Manufacturing CorporationIndustrial Machinery Attachment Co. (IMAC)JRB Company, Inc.New Dymax, Inc.Rockland Manufacturing Co.Weldco-Beales Manufacturing Ltd.Werk-Brau Company, Inc.

WL

TRASH GRAPPLEDesigned to handle trash at transfer stations and recyclingfacilities. The split clamp design enables the operator tosecurely grasp uneven loads.

Craig Manufacturing Ltd.Pemberton, Inc.Tink, Inc.

WL


ATTACHMENT TYPE


23

WOODCHIPExtra-large capacity bucket for handling woodchips, leaves,straw, silage or any other extra-light material.

ACS Industries, Inc.Ajusta-Buckets, Division of QCONBateman Manufacturing Charles Machine, Inc.Craig Manufacturing Ltd.Geith, Inc.Industrial Machinery Attachment Co. (IMAC)New Dymax, Inc.Pacific Services Manufacturing, Inc. (PSM)Pemberton, Inc.Rockland Manufacturing Co.Wicker Machine Company

WL

ENCLOSURERigid panels or soft-side enclosures that fit inside or outsideof machine ROPS.

Campbell International, Inc.Lake Superior Cabs, Inc.

CD, WL

RISERA fixed or variable position mechanism for raising the cab forbetter visibility.

Bateman Manufacturing Industrial Machinery Attachment Co. (IMAC)Jewell Manufacturing, Inc.Pierce Pacific Manufacturing, Inc.Weldco-Beales Manufacturing Ltd.Young Corporation

HE

CAB


ATTACHMENT TYPE


24

TIREUsed in severe applications such as hot slag, rock surfaces,limestone, gypsum, bauxite, granite, basalt, porphyry, andother applications where tire protection and increased tractionare required.

Rud Chain, Inc.

MG, WL

CHAINS

VIBRATORY PLATEUsed in place of a bucket or mounts to the bucket for com-pacting a variety of materials or for driving pilings.

Allied Construction Products, Inc.INDECOKent Demolition ToolNPK Construction Equipment, Inc.Pacific Services Manufacturing, Inc. (PSM)Rammer, Inc.Stanley Hydraulic ToolsTeledyne Specialty Equipment CM Products, Inc.Tramac Corporation

HE

COMPACTOR

WHEELUsed in place of a bucket or mounts to the bucket for mechan-ical compaction of trenches after backfilling.

Ajusta-Buckets, Division of QCONCraig Manufacturing Ltd.Entek Manufacturing, Inc.Guest Industries, Inc.Hendrix Manufacturing Hensley AttachmentsJRB Company, Inc.Rockland Manufacturing Co.Werk-Brau Company, Inc.

HE

ATTACHMENT TYPE


25

CRUSHERDesigned for breaking and downsizing large sections of con-crete beams, parapets, footings, foundations etc.

INDECOJRB Company, Inc.LaBounty ManufacturingNPK Construction Equipment, Inc.Pemberton, Inc.Rammer, Inc.Rockland Manufacturing Co.Teledyne Specialty Equipment CM Products, Inc.Tramac Corporation

HE

CONCRETE

PULVERIZERDesigned for demolishing reinforced concrete structures andfor crushing concrete. Downsizes concrete so that rebar caneasily be removed.

Geith, Inc.INDECO JRB Company, Inc.LaBounty Manufacturing Rammer, Inc.Teledyne Specialty Equipment CM Products, Inc.Tramac Corporation

HE

ELECTRICALAutomation systems, compressor panels, electric gages, elec-tric motor controls, engine panels, gen-set controls, magneticswitches and tattletales, pressure and vacuum gauges, tem-perature gauges, time vibration and overspeed controls, andvalves.

Frank W. Murphy Manufacturer, Inc.

CD, HE, MG, WL

CONTROLS/INSTRUMENTATION

ATTACHMENT TYPE


26

ELECTRICALVoltage step up and step down converters for 12V & 24Vaccessories.

Sure Power Industries, Inc.

CD, HE, MG, WL

BEDDINGThe hopper and conveyor system attaches to the excavator andallows the operator to control bedding material availability; theamount required when required.


HE

CONVERTER

CONVEYOR

ATTACHMENT TYPE


27

COUPLER

QUICK HITCH, EXCAVATORPermits changing buckets or special attachments in a fewminutes, usually without tools and without leaving the opera-tor's seat.

ACS Industries, Inc.Ajusta-Buckets, Division of QCONAttachments International, Inc.Bateman Manufacturing Central Fabricators, Inc.Craig Manufacturing Ltd.Entek Manufacturing, Inc.ESCO CorporationGeith, Inc.Hendrix Manufacturing Hensley Attachments Industrial Machinery Attachment Co. (IMAC) JRB Company, Inc.LaBounty ManufacturingMann CorporationNew Dymax, Inc.Pacific Services Manufacturing, Inc. (PSM) Pemberton, Inc.Progressive Attachments Corporation (PAC)Rockland Manufacturing Co.Weldco-Beales Manufacturing Ltd.Werk-Brau Company, Inc.Woods Equipment Company

HE

QUICK HITCH, GRADERPermits changing special attachments, such as plows orsweepers in a few minutes, usually without tools and withoutleaving the operator's seat.

ACS Industries, Inc.Henke Manufacturing CorporationIndustrial Machinery Attachment Co. (IMAC)Rylind Industries, Inc.Weldco-Beales Manufacturing Ltd.

MG

EXCAVATORMachine conversions such as raised cab, widened or length-ened undercarriage, purpose built booms, grapple, magnetand generator.

Crane Systems, Inc.

HE

CUSTOM MODIFICATIONS

ATTACHMENT TYPE


28

QUICK HITCH, LOADERPermits changing buckets or special attachments in a fewminutes, usually without tools and without leaving the opera-tor's seat.

ACS Industries, Inc.Bateman Manufacturing Central Fabricators, Inc.Geith, Inc.Industrial Machinery Attachment Co. (IMAC) JRB Company, Inc.New Dymax, Inc.Pacific Services Manufacturing, Inc. (PSM)Pemberton, Inc.Rockland Manufacturing Co.Rylind Industries, Inc.Weldco-Beales Manufacturing Ltd.Werk-Brau Company, Inc.

WL

RAIL CARFor coupling to and moving rail cars.

ACS Industries, Inc.Industrial Machinery Attachment Co. (IMAC)Pemberton, Inc.

WL

COUPLER (continued)

NON METALLICBolt on non metallic wear pad for use at waste transfer sta-tions to increase concrete floor life, increase traction, increasetire life and reduce noise. Also, used on snowplows whenplowing over road reflectors, protruding manhole covers, or inslush conditions.

F & BSETCO, Solid Tire & Rim (Southeast Tire, Inc.)Superior Tire and Rubber CorporationValk Manufacturing Co.Viking Cives, Inc.

MG, WL

CUTTING EDGE

STROKEGrabs, butts, delimbs, tops, measures, cuts to length, sortsand stacks trees.

Denharco, Inc.Pierce Pacific Manufacturing, Inc.Risely Equipment Ltd.

HE

DELIMBER

ATTACHMENT TYPE


29

EMISSION

CONTROLSCatalytic converters reduce HC and CO output. Soot trapsreduce soot output.

Engelhard Corporation

CD, HE, MG, WL

ATTACHMENT TYPE


30

FELLER BUNCHER

WITH SAW HEADUsed in selective thinning and clear cut logging applications,when stems must be cut cleanly without shattering. Can grab,hold, cut and bunch stems before transporting to a skid pile.Available with chain or disc saw. Some units are equippedwith a delimber.

MorbarkRisley Equipment Ltd.

HE, WL

WITH SHEARUsed for pulp wood harvesting or whole tree chipping opera-tions and in selective thinning and clear cut logging applica-tions, when shattering of stem is acceptable. Can grab, hold,shear and bunch multiple stems before transporting to a skidpile.

Morbark

HE, WL

FAIRLEAD

FOR WINCHESUsed with a winch to guide the winch line, raise log end toavoid obstructions, and transfer log weight to the machine toincrease tractive effort.

Industrial Machinery Attachment Co. (IMAC)Weldco-Beales Manufacturing Ltd.

CD, WL

ATTACHMENT TYPE


31

SYSTEMSAutomatic detection and actuation delivers a dry chemical toextinguish machine fire.

AFEX, Division of Bonaventure GroupAnsul Fire Protection

CD, HE, MG, WL

FIRE SUPPRESSION

FORK, LOG AND LUMBER

DOUBLE TOP CLAMPFork with two hydraulic top clamps, which close inside tinesor on top of tine tips.

ACS Industries, Inc.Craig Manufacturing Ltd.Industrial Machinery Attachment Co. (IMAC)JRB Company, Inc.Medford FabricationPemberton, Inc.Rylind Industries, Inc.Weldco-Beales Manufacturing Ltd.Werk-Brau Company, Inc.Wicker Machine Company

WL

LOG AND LUMBERFork with no clamp.

ACS Industries, Inc.Craig Manufacturing Ltd.Geith, Inc.Industrial Machinery Attachment Co. (IMAC)JRB Company, Inc.Pemberton, Inc.Rockland Manufacturing Co.Weldco-Beales Manufacturing Ltd.Wicker Machine Company

WL

ATTACHMENT TYPE


32

PADDLE TOP CLAMPFork with a paddle top clamp.

ACS Industries, Inc.Attachments International, Inc.Craig Manufacturing Ltd.Industrial Machinery Attachment Co. (IMAC)JRB Company, Inc.Pemberton, Inc.Rockland Manufacturing Co.Rylind Industries, Inc.Werk-Brau Company, Inc.Wicker Machine Company

WL

SINGLE TOP CLAMPFork with a single center mounted hydraulic top clamp.

ACS Industries, Inc.Craig Manufacturing Ltd.JRB Company, Inc.Pemberton, Inc.Rockland Manufacturing Co.Weldco-Beales Manufacturing Ltd.Wicker Machine Company

WL

PEELER BLOCK Available with single or double top clamp the low profile nar-row forks are used to feed steam vats.

Medford Fabrication

WL

FORK, LOG AND LUMBER (continued)

ATTACHMENT TYPE


33

DOUBLE TOP CLAMPSevere logging and millyard application fork with two hydraulictop clamps, which close inside tines or on top of tine tips.

ACS Industries, Inc.Bateman Manufacturing Industrial Machinery Attachment Co. (IMAC)Pacific Services Manufacturing, Inc. (PSM)Rockland Manufacturing Co.Weldco-Beales Manufacturing Ltd.Wicker Machine CompanyYoung Corporation

WL

FORK, MILLYARD

PADDLE TOP CLAMPSevere logging and millyard application fork with paddle topclamp.

ACS Industries, Inc.Craig Manufacturing Ltd.Industrial Machinery Attachment Co. (IMAC)JRB Company, Inc.Medford Fabrication Pacific Services Manufacturing, Inc. (PSM)Pemberton, Inc.Rockland Manufacturing Co.Weldco-Beales Manufacturing Ltd.Wicker Machine Company

WL

ATTACHMENT TYPE


34

CONSTRUCTIONHeavy duty design for handling palletized and loose construc-tion materials.

ACS Industries, Inc.Attachments International, Inc.Central Fabricators, Inc.Charles Machine, Inc.Industrial Machinery Attachment Co. (IMAC)JRB Company, Inc.Rockland Manufacturing Co.Rylind Industries, Inc.Weldco-Beales Manufacturing Ltd.Werk-Brau Company, Inc.Wicker Machine Company

WL

HYDRAULIC ADJUSTABLE TINEThe operator can control the tine spread hydraulically fromwithin the cab.

ACS Industries, Inc.Craig Manufacturing Ltd.

WL

FORK, UTILITY

CAR BODYFork with long tines specifically designed to handle automo-bile bodies in salvage operations.

ACS Industries, Inc.Attachments International, Inc.Charles Machine, Inc.Craig Manufacturing Ltd.Guest Industries, Inc.JRB Company, Inc.Pemberton, Inc.Rockland Manufacturing Co.Rylind Industries, Inc.Werk-Brau Company, Inc.Wicker Machine Company

WL

ATTACHMENT TYPE


35

LIP MOUNTEDForks manually clamp on bucket edge. No tools are needed forinstallation.

Attachments International, Inc.Guest Industries, Inc.Rockland Manufacturing Co.

WL

FORK, UTILITY (continued)

OVER THE BUCKETForks fit over the front of the bucket, permitting quick installa-tion and removal. No tools are required for hookup. The gener-al purpose forks can be used for a variety of applications.

Attachments International, Inc.Guest Industries, Inc.Industrial Machinery Attachment Co. (IMAC)Rockland Manufacturing Co.Kenco, Inc.Werk-Brau Company, Inc.

WL

PALLETStandard design for handling palletized materials.

ACS Industries, Inc.Bateman Manufacturing Craig Manufacturing Ltd.Guest Industries, Inc.Industrial Machinery Attachment Co. (IMAC)JRB Company, Inc.Medford FabricationNew Dymax, Inc.Pacific Services Manufacturing, Inc. (PSM)Rockland Manufacturing Co.Weldco-Beales Manufacturing Ltd.Wicker Machine Company

WL

ATTACHMENT TYPE


36

PIPE/POLE W AND W/O GRAPPLEFork with grapples specially designed for pipe or pole handling.

ACS Industries, Inc.Ajusta-Buckets, Division of QCONIndustrial Machinery Attachment Co. (IMAC) JRB Company, Inc.Medford FabricationRockland Manufacturing Co.Weldco-Beales Manufacturing Ltd.Wicker Machine Company

WL

FORK, UTILITY (continued)

GRADE CONTROL

LASERA full line of products using modern laser technology to assistthe contractor in creating accurate level and sloped sites.

Laser Alignment, Inc.Spectra Precision, Inc.

CD, HE, MG, WL

BARRIER LIFTINGA mechanical grapple used for placing and moving portablehighway barriers.

Kenco, Inc.

HE

GRAPPLE

ATTACHMENT TYPE


37

BASKET BUNCHING HEADMade specifically for picking up bunched logs stacked by afeller buncher. Can also be used to pick up individual logs.

TREE TOW (Brigden Manufacturing, Inc.)

CD

GRAPPLE (continued)

BUTT AND TOP Rotating head with hydraulically positioned stabilizing armson each side of a centrally mounted grapple for handling treelength logs in log sorting, log forwarding or log loading opera-tions.

Bateman Manufacturing Denharco, Inc.Industrial Machinery Attachment Co. (IMAC)Risley Equipment Ltd.Weldco-Beales Manufacturing Ltd.Young Corporation

HE

BUTT TYPE (LOG)Rotating grapple for handling short logs or pulpwood. Grappletines close tip to tip. Generally used for loading.

Industrial Machinery Attachment Co. (IMAC) Weldco-Beales Manufacturing Ltd.Young Corporation

HE

ATTACHMENT TYPE


38

BYPASS TYPE (LOG)Rotating grapple used for handling short or long logs. Grappletines can bypass to fully enclose small diameter logs or singlelogs. Used for loading or sorting.

Industrial Machinery Attachment Co. (IMAC)Jewell Manufacturing, Inc.Pierce Pacific Manufacturing, Inc.Weldco-Beales Manufacturing Ltd.Young Corporation

HE

DEMOLITIONFixed jaw by-passing type grapple for demolition, scrap recy-cling, rip rap, land clearing, log and pipe handling and quarryapplications.

Ajusta-Buckets, Division of QCONAllied-Gator, Inc.Attachments International, Inc.Bateman Manufacturing Central Fabricators, Inc.Geith, Inc.Genesis Equipment & Manufacturing, Inc.Hensley AttachmentsJRB Company, Inc.LaBounty ManufacturingMann CorporationPemberton, Inc.Pro-Line/Anvil AttachmentsRockland Manufacturing Co.Werk-Brau Company, Inc.Woods Equipment Company

HE

GRAPPLE (continued)

ATTACHMENT TYPE


39

GENERAL PURPOSEFixed jaw by-passing type grapple for land clearing, rakingand stacking burn pile, medium duty grubbing, handling smallscrap, demolishing wood and brick structures and rehandlingbulky loose materials.

Ajusta-Buckets, Division of QCONAllied Construction Products, Inc.Allied-Gator, Inc.Central Fabricators, Inc.Entek Manufacturing, Inc.Geith, Inc.Genesis Equipment & Manufacturing, Inc.Jewell Manufacturing, Inc.JRB Company, Inc.LaBounty ManufacturingMann CorporationNPK Construction Equipment, Inc.Pemberton, Inc.Progressive Attachments Corporation (PAC)Rockland Manufacturing Co.Weldco-Beales Manufacturing Ltd.Werk-Brau Company, Inc.Young Corporation

HE

HEELBOOMRotating grapple with hydraulically positioned heeling rack(live heel) for handling tree length logs in log sorting, log for-warding or log loading operations.

Industrial Machinery Attachment Co. (IMAC)Jewell Manufacturing, Inc.Pacific Services Manufacturing, Inc. (PSM)Pierce Pacific Manufacturing, Inc.Weldco-Beales Manufacturing Ltd.Young Corporation

HE

GRAPPLE (continued)

ATTACHMENT TYPE


40

SCRAP/SALVAGEA variety of models and sizes are available to match any mate-rial handling need that may arise. Ideal for handling singleitems, bulk scrap and large items such as car bodies.

Ajusta-Buckets, Division of QCONBateman Manufacturing Geith, Inc.Genesis Equipment & Manufacturing, Inc.LaBounty ManufacturingPierce Pacific Manufacturing, Inc.Pro-Line/Anvil AttachmentsWeldco-Beales Manufacturing Ltd.Werk-Brau Company, Inc.Young Corporation

HE

STRADDLE MOUNT GRAPPLE ATTACHMENT(Standard or Steep Slope)The grapple is attached to the rear of the tractor by means ofa boom assembly. The main boom frame is a see throughassembly which allows the operator to see the load at alltimes. It also has a jib boom on top to allow the operator toposition the load in the best location. Fairlead roller attach-ment is provided as an option to allow for line skidding inrestricted terrain and rescuing other machines. A light weightone piece boom is also available for small tractors.

Industrial Machinery Attachment Co. (IMAC)Jewell Manufacturing, Inc.TREE TOW (Brigden Manufacturing, Inc.)

CD

ORANGE PEELHydraulically actuated tines fully enclose materials being han-dled. Suitable for handling scrap, waste and bulk materials.

Geith, Inc.Genesis Equipment & Manufacturing, Inc.Pemberton, Inc.Pierce Pacific Manufacturing, Inc.Weldco-Beales Manufacturing Ltd.Young Corporation

HE

GRAPPLE (continued)

ATTACHMENT TYPE


41

LOADER AND DOZERHeavy duty guarding designed to protect the operator and theequipment. The guarding packages consist of cab guards,belly pan, undercarriage rock guards, side guarding, sweeps,screens, etc.

Industrial Machinery Attachment Co. (IMAC)JRB Company, Inc.Risley Equipment Ltd.Weldco-Beales Manufacturing Ltd.

CD, WL

GUARDING PACKAGE

EXCAVATORHeavy duty guarding designed to protect the operator and theequipment. The guarding packages consist of cab guards,belly pan, undercarriage rock guards, side guarding, full lengthcatwalks, machinery underhouse guards, front guarding toprotect fuel and hydraulic tank, window screens, etc.

Bateman Manufacturing Industrial Machinery Attachment Co. (IMAC)Jewell Manufacturing, Inc.JRB Company, Inc.Pacific Services Manufacturing, Inc. (PSM)Pierce Pacific Manufacturing, Inc.Risely Equipment Ltd.Weldco-Beales Manufacturing Ltd.Young Corporation

HE

TONG HEADMade specifically for picking up individual logs. High squeez-ing pressure on the tips of the tines provide superior holdingcapability for all types of wood and conditions. The swivelhousing allows the grapple to rotate. Can be used to pick up astack of logs.


CD

GRAPPLE (continued)

ATTACHMENT TYPE


42

HYDRAULICUsed during construction, demolition, mining and quarry workfor breaking or demolishing concrete structures, cuttingthrough asphalt or frozen ground, trenching in frozen groundor rock and for breaking oversized material into smallerpieces.

Allied Construction Products, Inc.ESCO CorporationGuest Industries, Inc.INDECO JRB Company, Inc.Kent Demolition ToolNPK Construction Equipment, Inc.Rammer, Inc.Stanley Hydraulic ToolsTeledyne Specialty Equipment CM Products, Inc.Tramac Corporation

HE

HAMMER

EXCAVATORKits available for the plumbing and control of various attach-ments. Used when installing such attachments as thumbs,hammers, bucket tilt, compactors, etc.

ESCO CorporationHKX, Inc.

HE

HYDRAULIC KITS

TREEDesigned for tree length or cut to length harvesting methodsof trees at a landing, roadside or at the stump. Can fell, top,delimb, measure and cut to length.

Denharco, Inc.Pierce Pacific Manufacturing, Inc.Risely Equipment Ltd.

HE

HARVESTER

ATTACHMENT TYPE


43

TURNTABLEUsed to level the upper structure of an excavator in order toreduce swing power requirements and make it easier to dig astraight and vertical trench.

Pierce Pacific Manufacturing, Inc.

HE

CENTRALCentrally located lubrication system. Two basic types of sys-tems are available. The automatic system dispenses grease totractor pins and bushings at a pre-determined interval from acentrally located reservoir. The second type of systemrequires that grease be pumped into a centrally located mani-fold which then distributes the grease evenly to the pins andbushings.

Lincoln IndustrialLubriQuip, Inc.

CD, HE, MG, WL

LEVELER

LUBRICATION SYSTEM

SCRAP HANDLINGUsed in scrap and salvage yards for handling ferrous metalstock that is either too large (slabs, sheets etc.) or too small(cut offs, turnings etc.) to be handled by a grapple.

Ohio Magnetics, Inc.O.S. Walker

HE

MAGNET

ATTACHMENT TYPE


44

VIBRATORYVibratory action loosens and separates the particles of granu-lar soils which allows the driver/extractor to literally slip sheetpile, H-Beams, guard rail posts and similar piers into the earthquickly, quietly and economically.

Tramac Corporation

HE

FIRELINEDirectly attached or towed behind plows that clear denseunderbrush and grasses to create a firebreak.

FESCO, Division of Mathis Plow Co.Hester Plow Company

CD

PILE DRIVER

PLOWS

CABLEA ripper type plow used for direct underground placement ofcables or flexible pipe that creates less ground disturbancethan open trenching.

Ateco

CD

AIR CLEANER Used to increase the replacement interval for the existingengine air filter by precleaning the incoming air.

Donaldson CompanySy-Klone CompanyTurbo Industries

CD, HE, MG, WL

PRECLEANER

ATTACHMENT TYPE


45

COUPLERSCouplers that enable fast, no spill transfer of fuel, coolant, oroils between service truck and machine.

Adel Wiggins Group - TransDigim, Inc.

CD, HE, MG, WL

QUICK FILL

RAKE

BLADEUsed for land clearing operations such as removing stumps,roots, and rocks. Two styles are available. One fits over dozerblade and swings up or is easily removed when not in use.The other style replaces the blade and mounts directly to theC-frame.

Bateman Manufacturing Craig Manufacturing Ltd.Industrial Machinery Attachment Co. (IMAC)Mann CorporationRockland Manufacturing Co.Weldco-Beales Manufacturing Ltd.

CD

UNIVERSAL Interchangeable jaws and rotation capability increase projectversatility in demolition and in any application requiring effi-cient processing of steel or concrete.

Genesis Equipment & Manufacturing, Inc.LaBounty ManufacturingNPK Construction Equipment, Inc.Teledyne Specialty Equipment CM Products, Inc.Tramac Corporation

HE

PROCESSOR

ATTACHMENT TYPE


46

CLEARING AND STACKING (WITH AND W/O CLAMPS)Ideal for land clearing. The curved teeth remove and stack rocks,trees, brush and demolition debris while sifting out dirt.

ACS Industries, Inc.Craig Manufacturing Ltd.Industrial Machinery Attachment Co. (IMAC)JRB Company, Inc.Mann CorporationPemberton, Inc.Rockland Manufacturing Co.Weldco-Beales Manufacturing Ltd.

CD, WL

LAND CLEARINGUsed for the clearing, handling, and mounding of brush, rocks,and demolition debris.

Attachments International, Inc.Bateman Manufacturing Craig Manufacturing Ltd.Jewell Manufacturing, Inc.Pacific Services Manufacturing, Inc. (PSM) Pemberton, Inc.Progressive Attachments Corporation (PAC)Weldco-Beales Manufacturing Ltd.Werk-Brau Company, Inc.

HE

RAKE (continued)

BUCKETRake attached to lower portion of bucket. Used for clearing,trashing, rock sifting, and gathering. Can be easily removed orchained to the buckets top moldboard so the bucket can beused in the normal manner.

Mann CorporationProgressive Attachments Corporation (PAC)

WL

ATTACHMENT TYPE


47

RIDE CONTROL

RIPPER

LOADERBucket suspension control which reduces fore and aft pitch-ing motion during higher speed travel.

Paul Wever Construction Equipment Co., Inc.

WL

REAR MOUNTED PARALLELParallel linkage maintains tip to ground angle regardless ofworking depth. The upper links are replaced with hydrauliccylinders on some models enabling the operator to adjust thetip to ground angle for the desired penetration angle.

ACS Industries, Inc.Ateco Weldco-Beales Manufacturing Ltd.

CD, MG, WL

LOADER (WITH AND W/O CLAMPS)Used for land clearing. Long curved tines, for maximum loadcapacity, enable the operator to pick up and load debris attruck height while sifting out dirt.

ACS Industries, Inc.JRB Company, Inc.Pemberton, Inc.Rockland Manufacturing Co.Rylind Industries, Inc.Weldco-Beales Manufacturing Ltd.Werk-Brau Company, Inc.

WL

RAKE (continued)

ATTACHMENT TYPE


48

RIPPER (continued)

REAR MOUNTED RADIALLinkage geometry acts in an arc, so that the penetration angleof the tip to the ground varies as the tip is lowered.

ACS Industries, Inc.Ateco New Dymax, Inc.

CD, MG, WL

SCARIFIERUsed as a light duty ripper to loosen hard packed dirt and ripup asphalt so the surface can then be graded.

Ateco Craig Manufacturing Ltd.Henke Manufacturing CorporationIndustrial Machinery Attachment Co. (IMAC) Little Falls Machine, Inc.New Dymax, Inc.Rylind Industries, Inc.Weldco-Beales Manufacturing Ltd.

MG

ATTACHMENT TYPE

TOOTHUsed in place of, or attached to the back of the bucket forbreaking rock, pavement, ice, frozen ground and root systems.

Ajusta-Buckets, Division of QCONAttachments International, Inc.Bateman Manufacturing Central Fabricators, Inc.Craig Manufacturing Ltd.Entek Manufacturing, Inc.ESCO CorporationGeith, Inc.Guest Industries, Inc.Hendrix Manufacturing Hensley Attachments Industrial Machinery Attachment Co. (IMAC)JRB Company, Inc.Mann CorporationPemberton, Inc.Progressive Attachments Corporation (PAC)Rockland Manufacturing Co.Weldco-Beales Manufacturing Ltd.Werk-Brau Company, Inc.

HE

PAYLOADOn board weighing system weighs bucket payload on themove.

Evergreen Weigh, An SI Technologies CompanyLoad Rite North America

HE, WL

SCALE

RIPPER (continued)


49

ATTACHMENT TYPE


50

RAILROAD RAIL PROCESSORUsed for efficient downsizing of scrap rail and other brittlemetals.

LaBounty Manufacturing

HE

STUMPUsed for splitting and grubbing out stumps. Quickly reducesstumps and other wood debris to proper size for tub grindingand landfill operations.

Jewell Manufacturing, Inc.LaBounty ManufacturingMann CorporationPemberton, Inc.Rockland Manufacturing Co.Weldco-Beales Manufacturing Ltd.

HE

SHEAR

HYDRAULIC MOBILEConcrete, metal and wood shear that mounts in place of a buck-et or arm that is used for demolition and scrap processing.

Allied-Gator, Inc.Geith, Inc.Genesis Equipment & Manufacturing, Inc.JRB Company, Inc.LaBounty ManufacturingNPK Construction Equipment, Inc.Pemberton, Inc.Teledyne Specialty Equipment CM Products, Inc.Tramac CorporationWeldco-Beales Manufacturing Ltd.

HE

ATTACHMENT TYPE


51

AIRPORTWide plows with large capacity specifically designed toremove snow from airport ramps, runways and parking areas.

Craig Manufacturing Ltd.Henke Manufacturing CorporationLittle Falls Machine, Inc.Rylind Industries, Inc.Valk Manufacturing Co.Viking Cives, Inc.

MG, WL

SNOW PLOW

LIP MOUNTEDPlow is mounted to the bucket cutting edge and can be easilyremoved to allow for normal bucket usage. Plow can be usedstraight or angled

Guest Industries, Inc.

WL

LOADERThe most popular snow remover tool in heavy, wet snow beltareas. Travel speed varies with depth of snow, plus the blowercan be raised to handle very deep drifts more efficiently thanother snow removers. Two basic types exist: one is unitized,the other features a rear mounted engine.

R.P.M. Tech, Inc.Weldco-Beales Manufacturing Ltd.

WL

SNOWBLOWER

ATTACHMENT TYPE


52

SNOW PLOW (continued)

V PLOWThe plow is installed to form a “ V “ shape and pushes snow toboth sides. The faster the machine travels the farther it throwsthe snow. The plow is designed for high drifts and can alsotravel at high speed through light and shallow snow.

Craig Manufacturing Ltd.Henke Manufacturing CorporationIndustrial Machinery Attachment Co. (IMAC)Little Falls Machine, Inc.New Dymax, Inc.Rockland Manufacturing Co.Rylind Industries, Inc.Valk Manufacturing Co.Weldco-Beales Manufacturing Ltd.

MG, WL

REVERSIBLEPlow can be angled from side to side, while clearing snowfrom air ports, parking lots and urban or rural roads.

Bateman Manufacturing Central Fabricators, Inc.Craig Manufacturing Ltd.Henke Manufacturing CorporationIndustrial Machinery Attachment Co. (IMAC) JRB Company, Inc.Little Falls Machine, Inc.New Dymax, Inc.Rockland Manufacturing Co.Rylind Industries, Inc.Valk Manufacturing Co.Weldco-Beales Manufacturing Ltd.

MG, WL

ONE WAYDischarges snow to one side and is suitable for high speedsnow removal at airports, highways, shopping centers, citystreets and rural roads. Rigid and trip blades are available.

Craig Manufacturing Ltd.Little Falls Machine, Inc.Rockland Manufacturing Co.Rylind Industries, Inc.Valk Manufacturing Co.Viking Cives, Inc.Weldco-Beales Manufacturing Ltd.

MG, WL

ATTACHMENT TYPE


53

WING MOUNTEDThe wing mounted snow plow provides added reach and ver-satility to the tractor. The hydraulic wing assembly allows forfull articulation of the tractor with the wing in any of the plowpositions or carry position.

Craig Manufacturing Ltd.Henke Manufacturing CorporationIndustrial Machinery Attachment Co. (IMAC)Little Falls Machine, Inc.Rockland Manufacturing Co.Rylind Industries, Inc.Viking Cives, Inc.Weldco-Beales Manufacturing Ltd.

MG, WL

SNOW PLOW (continued)

STUMPUsed for stump clearing operations. Splits and pries stumpsto reduce the time needed to doze the stumps out. Splittermounts in place of ripper.

AtecoWeldco-Beales Manufacturing Ltd.

CD

SPLITTER

TREE Digs trees for transplanting with root ball intact.

Caretree Systems

WL

SPADE

WING GATEGate blocks wing plow discharge to prevent snow-filled drive-ways.

Craig Manufacturing Ltd.Industrial Machinery Attachment Co. (IMAC)Weldco-Beales Manufacturing Ltd.

MG, WL

ATTACHMENT TYPE


54

SOLIDUsed in place of pneumatic tires and rims in applicationswhere tires can be cut and punctured, such as construction,demolition, forestry, glass, mining, paper, recycling, scrap,quarry and waste.

SETCO, Solid Tire & Rim (Southeast Tire, Inc.)

HE, WL

TIRE

BUCKET PICK UPThe sweeping action of the brushes pick up small and largedebris and shoot it into a bucket. To dump the load raise thesweeper over a trash container or a truck and tilt the debrisbucket.

Sweepster, Inc.

WL

SWEEPER

STARTING AIDS

COLD WEATHERElectrical heating equipment to aid in the starting of internalcombustion engines. Coolant, oil, and battery heating systems.

Kim Hotstart Mfg. Co., Inc.

CD, HE, MG, WL

ROTARY BROOMUsed to sweep dirt, sand, snow, and other debris from pavedor unpaved areas. Ideal for airports, factories, farms, mines,quarries, schools and city, county and state road mainte-nance. Watering systems are usually available.

Bateman Manufacturing Central Fabricators, Inc.Industrial Machinery Attachment Co. (IMAC)JRB Company, Inc.Sweepster, Inc.

WL

ATTACHMENT TYPE


55

HYDRAULICHydraulically powered front or rear mounted cable winches forpulling, towing, or hoisting loads.

Allied Systems Company BRADEN/CARCO/GEARMATIC, Divisions of PACCARFESCO, Division of Mathis Plow Co.

CD

WINCH

RUBBER TIREDReplaces crawler type undercarriage with a wheeled type.Includes outriggers to provide stability and adjustment onrough terrain.


HE

UNDERCARRIAGE

NON METALLICBolts to steel grouser to protect road pavement and pavementat scrap and mill yards.

BLS Enterprises, Inc.Superior Tire and Rubber Corporation

CD, HE

TRACK PADS

WARNING

LIGHTSHeavy duty 12V & 24V warning lights.

ECCOSure Power Industries, Inc.

CD, HE, MG, WL

MANUFACTURER INDEX

56

Adel Wiggins Group - TransDigim, Inc.

Quick Fill Couplers for:CoolantCrankcase oilFuelHydraulic oilTransmission oil

5000 Triggs StreetP.O. Box 22228Los Angeles, CA 90022213-269-9181Fax: 213-526-4263Contact:Rebecca ValleRussel Beemer

Barrel Handler, LoaderBlade, LoaderBoom, ExtendibleBucket, Excavator

Ditch CleaningPlate Lip, Heavy DutyPlate Lip, Standard Duty

Bucket, LoaderCoal/Light MaterialGeneral PurposeGrappleHot SlagMultipurposeRock, SkeletonRock, Spade NoseRock, Straight EdgeSide DumpSnow/BasketWoodchip

CouplerQuick Hitch, ExcavatorQuick Hitch, GraderQuick Hitch, Loader

2151 Mogadore RoadKent, OH 44240-0810330-678-2511800-321-2348Fax: 330-678-0859Contact:Tom KuharMike Novotny

20202 Hwy. 59, North, #175Humble, TX 77338281-540-2111800-231-1826Fax: 281-540-1666Contact:Gena DraperCathy Lefler

ACS Industries, Inc.

Coupler (continued)Railcar

Fork, Log and Lumber Double Top ClampLog and LumberPaddle Top ClampSingle Top Clamp

Fork, MillyardDouble Top ClampPaddle Top Clamp

Fork, UtilityCar BodyConstructionHydraulic Adjustable TinePalletPipe/Pole Grapple

RakeClearing and Stacking (with andw/o clamps)Loader (with and w/o clamps)

RipperRear Mounted ParallelRear Mounted Radial

AFEX, Division of Bonaventure Group, Inc.

Fire Suppression, Systems5808 Lease LaneRaleigh, NC 27613919-781-6610Fax: (919) 787-3915E-Mail: [email protected] Site: afex.home.mind-spring.comContact: John Carter

MANUFACTURER INDEX

57

Bucket, LoaderCoal/Light MaterialSnow/BasketWoodchip

Compactor, WheelCoupler, Quick Hitch, ExcavatorFork, Utility

Pipe/Pole GrappleGrapple

Demolition General PurposeScrap/Salvage

Ripper, Tooth

Ajusta-Buckets, Division of QCON

Barrel Handler, ExcavatorBlade, BackfillBucket, Excavator

Coral RockClam Shell Ditch CleaningPavement RemovalPlate Lip, Heavy DutyPlate Lip, Standard DutySand/Flat BottomThumbTrapezoidal

P.O. Box 63072305 Manchester Rd.Erie, PA 16512-6307888-448-2486814-838-4597Fax: 814-833-3781E-Mail: [email protected] Site:ncinter.net/~buckets/index.htmlContact: Stuart Foradora

Allied Construction Products, Inc.

Asphalt CutterBucket MountedMoldboard Mounted

Compactor, Vibratory PlateGrapple, General PurposeHammer, Hydraulic

3900 Kelley Ave.Cleveland, OH 44114800-321-1046216-431-2600 Ext. 212Fax: 216-431-2602E-Mail: alliedconstrprod.comContact: Steve Sabo

Allied Systems Company

Winch, Hydraulic2300 Oregon St.Sherwood, OR 97140-9799503-625-2560Fax: 503-625-7269Contact: Jerry Moser

Allied-Gator, Inc.

GrappleDemolitionGeneral Purpose

Shear, Hydraulic Mobile

2100 Poland Ave.Youngstown, OH 44502800-624-2867330-743-4437Fax: 330-744-3218E-mail: [email protected]:Mark RamunMarc Cossette

MANUFACTURER INDEX

58

Altrax

See Charles Machine, Inc.

Amulet Manufacturing Co., Inc.

Bucket, ExcavatorThumb

5640 West End RoadArcata, CA 95521800-526-8538707-822-2282Fax: 707-822-2398Contact: Deric Wagner

Ansul Fire Protection

Fire Suppression, SystemsOne Stranton St.Marinette, WI 54143630-305-5700Fax: 630-305-3360E-Mail: [email protected]:[email protected] Site: ansul.comContact:Bill BorlandBill Klingenmaier

Ateco

Asphalt Cutter, Ripper/Scarifier MountedBlade, Bank SloperPlow, CableRipper

Rear Mounted ParallelRear Mounted RadialScarifier

Splitter, Stump

P.O. Box 1079Camarillo, CA 93011800-842-9358805-388-3839Fax: 805-389-1131Contact: Brad Paulson

MANUFACTURER INDEX

59

Coupler, Quick HitchFork, Log and Lumber

Paddle Top ClampFork, Utility

Car BodyConstructionLip MountedOver The Bucket

Grapple, DemolitionRake, Land ClearingRipper, Tooth

Attachments International, Inc.

Asphalt CutterBucket MountedMoldboard MountedRipper/Scarifer Mounted

Bucket, ExcavatorDitch CleaningNarrow TrenchPavement RemovalRoundSand/Flat BottomThumbTrapezoidal

RR#2, P.O. Box 444Pelican Rapids, MN 56572218-863-6444Fax: 218-863-6446Contact:Gerry HenryRenee Shores

Baert’s Metal Products

See Woods Equipment Co.

Bucket, Loader (continued)MultipurposeRock, Spade NoseRock, Straight EdgeSide DumpSnow/BasketWoodchip

Cab, RiserCoupler, Quick Hitch

ExcavatorLoader

Fork, MillyardDouble Top Clamp

Fork, Utility, PalletGrapple

Butt and Top (log)DemolitionScrap/Salvage

Guarding Package, ExcavatorRake

BladeLand Clearing

Ripper, ToothSnowplow, ReversibleSweeper, Rotary Broom

Bateman Manufacturing

BoomExtendibleForestry High LiftScrap Handling, Two SectionSuper Long Front

BladeBackfillCoalLandfillU - BladeWoodchip

Brush Cutter, Rotary/FlailBucket, Excavator

Ditch CleaningPlate Lip, Heavy DutyPlate Lip, Standard Duty RipperThumbTilting

Bucket, LoaderCoal/Light MaterialGeneral PurposeGrappleHigh Dump

515 Welham Rd.Barrie, Ontario L4M 6E7Canada705-733-2668Fax: 705-733-2669Contact: Glenn Hodgkinson

MANUFACTURER INDEX

60

BRADEN/CARCO/GEARMATIC, Divisions of PACCAR

Winches, HydraulicP.O. Box 547Broken Arrow, OK 74013918-251-8511Fax: 918-259-1575E-Mail: [email protected] Site: paccar.com/winchContact: Al Lauridsen

C&P Enterprises, Inc.

Bucket, ExcavatorDitch CleaningPlate Lip, Heavy DutyThumb

8822 Apison PikeOoltewah, TN 37363800-433-6404423-396-9330Fax: 423-396-3317Contact: Gary D. Wilt

Campbell International, Inc.

Cab, Enclosure120 W. Kent AveWauconda, IL 60084847-526-7300Fax: 847-526-7447Contact: James Campbell

BLS Enterprises, Inc.

Track Pads, Non Metallic1080 Nerge Rd.Suite 204Elk Grove Village, IL 60007-3224800-307-0299847-301-0299Fax: 847-301-0651E-mail:[email protected]: Barry Stoughton

MANUFACTURER INDEX

61

Coupler, Quick HitchExcavatorLoader

Fork, Utility, ConstructionGrapple

DemolitionGeneral Purpose

Ripper, ToothSnowplow, ReversibleSweeper, Rotary Broom

Central Fabricators, Inc.

Boom, ExtendibleBucket, Excavator

Ditch CleaningPlate Lip, Heavy DutyPlate Lip, Standard Duty RoundThumb

Bucket, LoaderCoal/Light MaterialGeneral Purpose

P.O. Box 440351 Alderson StreetSchofield, WI 54476-0440800-782-5454Fax: (715) 359-9537E-Mail: [email protected] Site: centralfab.comContact: Randy Strehlow

Bucket, Loader (continued)LandfillRock, Spade NoseRock, Straight EdgeSnow/BasketWoodchip

Fork, UtilityCar body Construction

Charles Machine, Inc.

Bucket, ExcavatorPlate Lip, Heavy DutyPlate Lip, Standard DutyThumbTrapezoidal

Bucket, LoaderCoal/Light MaterialGeneral PurposeHot Slag

R.D. 2P.O. Box 423Summerville, PA 15864-9049814-379-3706Fax: 814-379-3531Contact: Brian Miller

Caretree Systems

Spade, Tree 160 Outerbelt StreetColumbus, OH 43213614-861-7775800-227-3873Fax: (614) 861-7349E-Mail: [email protected] Site: caretree.comContact: Geb Keny

MANUFACTURER INDEX

62


Fork, Log and Lumber Double Top ClampLog and LumberPaddle Top ClampSingle Top Clamp

Fork, MillyardPaddle Top Clamp

Fork, UtilityCar BodyHydraulic Adjustable TinePallet

RakeBladeClearing and StackingLand Clearing

RipperScarifier Tooth

SnowplowAirportOne WayReversibleV PlowWing GateWing Mounted

Craig Manufacturing Ltd.

BladeBackfillLandfillU-BladeUtility DozerWoodchip


Ditch CleaningPlate Lip, Heavy DutyThumbTilting

Bucket, LoaderCoal/Light MaterialGeneral PurposeHigh DumpHot SlagLandfillMultipurposeOver the ForkRock, SkeletonRock, Spade NoseRock, Straight EdgeSide DumpSnow/BasketTrash GrappleWoodchip

Compactor, Wheel

P.O. Box 32820 Orser St.Hartland, New BrunswickCanada E0J 1N0506-375-4493800-267-5578Fax: 506-375-4848E-Mail: [email protected]:John W. Craig Jay Brown

Denharco, Inc.

Boom, Forestry High LiftDelimber, StrokeGrapple, Butt and TopHarvester, Tree

5110 Beaudry StreetSaint-Hyacinthe, PQCanada J2S8A2514-773-5454800-567-0630Fax: 514-773-8167E-Mail: [email protected] Site: denharco.comContact: Roger Legault

Crane Systems, Inc.

Custom Modifications, Excavator200 Industrial ParkwayChagrin Falls, OH 44022216-247-0118Fax: 216-247-0119Contact: Tim Wilson

MANUFACTURER INDEX

63

Digmor California

Arm, Extendible 346 South “I” StreetSuite 22San Bernardino, CA 92410800-228-8224909-381-0333Fax: 909-381-0225E-Mail: [email protected] Site: members.aol.com/theri-oigo/digmor.htm Contact: Brenda Perry

Donaldson Company

Precleaner, Air Cleaner 1400 West 94th StreetMail station 157Minneapolis, MN 55440-1299800-374-1374Fax: 612-887-3716Contact: Sales Department

ECCO

Warning, Lights833 W. Diamond StreetBoise, Idaho 83705-5291888-865-9544Fax: 800-688-3226E-Mail: [email protected] Site: eccolink.comContact: Dave Hays

Engelhard Corporation

Emission, ControlsCatalytic converterSoot traps

101 Wood Ave.Iselin, NJ 08830-0770800-523-3599732-205-5460Fax: 732-205-6146E-Mail: [email protected] Site: engelhard.comContact: Dwayne Johnson

MANUFACTURER INDEX

64

Compactor, WheelCoupler, Quick Hitch

ExcavatorGrapple, General PurposeRipper, Tooth

Entek Manufacturing, Inc.

Bucket, ExcavatorDitch Cleaning Plate Lip, Heavy DutyPlate Lip, Standard DutyThumb

1512 Linda Vista DriveSan Marcos, CA 92069760-744-8080Fax: 760-744-1734Contact: Rick Kroll

Erlau

See Rud-Chain, Inc.

Eskridge, Inc.

Auger, Hydraulic1900 Kansas City RoadOlathe, Kansas 66061913-782-1238Fax: 913-782-4206Contact:Tim McCallStan Hunt

Bucket, Excavator (continued)ThumbV-Line Frost

Coupler, Quick HitchExcavator

Hammer, HydraulicHydraulic Kits, ExcavatorRipper, Tooth

ESCO Corporation

Bucket, ExcavatorCast LipCoral RockDitch CleaningDrop CenterPlate Lip, Heavy DutyPlate Lip, Standard DutyRipper

122 East Gate DriveDanville, IL 61834800-446-3726Fax: 217-446-1601E-Mail: [email protected] Site: escocorp.comContact: Luella Ephlin

Evergreen Weigh, An SI Technologies Company

Scale, Payload4611 South 134th PlaceSeattle, WA 98168800-255-8274206-244-6100Fax: 206-246-7195E-Mail:[email protected] Site: sitechnologies.comContact: Ann Nichols

MANUFACTURER INDEX

65

F & B

Cutting Edge, Non Metallic43 Washburn StreetNew Bedford, MA 02740800-847-3130Fax: 508-991-7131Contact: Jerry Arruda


Bucket, ExcavatorCompaction (Tamping Pad Roller)Compaction (Vibrating Hydraulic Plate)

Conveyor, Bedding

3660 Grant Creek RoadP.O. Box 7099Missoula, Montana 59807800-221-5427406-728-9103Fax: 406-543-4221Contact:Ned HaeusslerEd Stevenson

Frank W. Murphy Manufacturer, Inc.

Controls/Instrumentation, ElectricalP.O. Box 470248Tulsa, OK 741473131 S. SheridanTulsa, OK 74145918-627-3550Fax: 918-664-6146E-Mail: [email protected]: David Erz

FESCO, Division of Mathis Plow Co.

Plow, FirelineWinch, Hydraulic

Front and Rear Mount

P.O. Box 1277Highway 82 E.Starkville, MS 39759601-323-5600Fax: 601-323-7959Contact: Harry Tabor

Gannon Manufacturing


MANUFACTURER INDEX

66

Bucket, Loader (continued)Multipurpose Rock, Spade NoseRock, Straight EdgeWoodchip

Concrete, PulverizerCoupler, Quick Hitch

ExcavatorLoader

Fork, Log and LumberLog and Lumber

GrappleDemolitionGeneral PurposeOrange PeelScrap/Salvage

Ripper, ToothShear, Hydraulic Mobile

Geith, Inc.

BladeBackfillLoader

Bucket, ExcavatorCast LipClam ShellDitch CleaningJawNarrow TrenchPavement RemovalPlate Lip, Heavy DutyPlate Lip, Standard DutyTiltingTrapezoidalThumb

Bucket, LoaderGeneral PurposeHigh DumpHot Slag

22721 Airpark DrivePetersburg, VA 23803804-733-2183Fax: 804-733-3669Web site: geith.comContact: Brandon English

Gregory Manufacturing Company

Brush Cutter, Rotary/FlailP.O. Box 269506 Oak RoadLewiston, NC 27849919-348-2531800-233-4734Fax: 919-348-2400Contact: Mike Greene

Genesis Equipment & Manufacturing, Inc.

ShearHydraulic Mobile

GrappleDemolitionGeneral PurposeOrange PeelScrap/Salvage

Processor, Universal

1000 Genesis DriveSuperior, WI 54880888-743-2748Fax: 715-395-5255Contact: Kevin Bakke

MANUFACTURER INDEX

67

Hendrix Manufacturing

Bucket, ExcavatorCast Lip Ditch CleaningPlate Lip, Heavy DutyPlate Lip, Standard Duty

Compactor, Wheel Coupler, Quick Hitch

Excavator Ripper, Tooth

P.O. Box 919Mansfield, LA 71052318-872-1660Fax: 318-872-1508E-Mail: [email protected]:Keith HawkinsMike Lynch

Ripper, ScarifierSnowplow

AirportReversibleV PlowWing Mounted

Henke Manufacturing Corporation

BladeLoaderUtility Dozer

Bucket, LoaderSnow/Basket

Coupler, Quick HitchGrader

3070 WilsonP.O. Box 709Levenworth, KS 66048913-682-9000Fax: 913-682-0300Contact: Bob Lacy

Bucket, LoaderCoal/Light MaterialGeneral PurposeRock, Spade NoseRock, Straight Edge

Compaction, WheelCoupler, Quick Hitch

ExcavatorGrapple, DemolitionRipper, Tooth

Hensley Attachments

Bucket, ExcavatorCast LipCoral RockDitch CleaningPlate Lip, Heavy DutyPlate Lip, Standard DutyRoundThumbV Line Frost

800 South 5th StreetMansfield, TX 76063817-477-3167800-433-3144Fax: 817-477-3646Contact: Rick Campbell

Fork, Utility (continued)Lip MountedOver-the-BucketPallet

Hammer, HydraulicRipper, Tooth Snowplow, Lip Mounted

Guest Industries, Inc.

Asphalt CutterBucket MountedRipper/Scarifier Mounted

Blade, BackfillCompaction, WheelFork, Utility

Car Body

3601 Winsted RoadTorrington, CT 06790-2297860-482-1118800-243-5390 (outside CT)Fax: 860-489-6336Contact: Gary Guest

MANUFACTURER INDEX

68

HKX, Inc.

Hydraulic Kits, ExcavatorPlumbing and control kits available for the following:

Brush CutterBucket TiltCompactorCustom ApplicationsGrapple/Dual Function RotateHammer Kit (Standard and Low Back Pressure)Multiple FunctionThumb Kit

P.O. Box 160017404 147th St. SESuite KMonroe, WA 98272360-805-8600800-493-5487 (800-HYDKITS)Fax: 800-353-5736Web Site: hkx.comContact: Chuck Morgan

INDECO

Compactor, Vibratory PlateConcrete

CrusherPulverizer

Hammer, Hydraulic

120 Dodge AvenueStratford, CT 06497203-377-7791Fax: 203-377-7796E-Mail: [email protected]: Greg Henry

Hester Plow Company

Plow, FirelineP.O. Box 340East WashingtonLake City, FL 32056-0340904-755-0960Fax: 904-755-0961Contact: Jack Shepard

MANUFACTURER INDEX

69

Fairlead, For WinchesFork, Log and Lumber

Double Top ClampLog and LumberPaddle Top Clamp


Fork, UtilityConstructionOver the BucketPalletPipe/Pole Grapple

GrappleButt and TopButt Type (log)Bypass Type (log)HeelboomStraddle Mount Grapple

Guarding Package ExcavatorLoader and Dozer

RakeBladeClearing and Stacking

RipperScarifierTooth

SnowplowReversibleV PlowWing GateWing Mounted

Sweeper, Rotary Broom

Industrial Machinery Attachment Co. (IMAC)

Asphalt Cutter, Bucket MountedBarrel Handler, LoaderBlade

BackfillCoalLandfillLoaderU-BladeUtility DozerWoodchip

Boom, ExtendibleBrush Cutter, Rotary/FlailBucket, Excavator

Cast LipClam ShellDitch CleaningPlate Lip, Heavy DutyPlate Lip, Standard DutyThumbTiltingTrapezoidalV-Line Frost

Bucket, LoaderCoal/Light MaterialGeneral PurposeGrappleHigh DumpMultipurposeRock, SkeletonRock, Spade NoseRock, Straight EdgeSide DumpSnow/BasketWoodchip

Cab, RiserCoupler

Quick Hitch, ExcavatorQuick Hitch, LoaderQuick Hitch, GraderRail Car

6400 30th StreetEdmonton, Alberta Canada T6P 1J6403-469-9185Fax: 403-469-9256E-Mail: [email protected] Site: imac.caContact:Don WilsonTim Stubbs

7943 Webster RoadDelta, B.C. CanadaV4G 1E4604-940-9755Fax: 604-940-9759E-Mail: [email protected]:Ken MuellerBrian Wilson

MANUFACTURER INDEX

70

GrappleBypass type (log)General PurposeHeelboomStraddle Mount Grapple

Guarding Package, ExcavatorRake, Land ClearingShear, Stump

Jewell Manufacturing, Inc.

BoomLog LoadingScrap Handling, Three SectionScrap Handling, Two SectionSuper Long Front

Bucket, ExcavatorClam ShellThumb

Cab, Riser

5525 S.E. 28th Ave.Portland OR 97202503-230-0456Fax: 503-230-1101E-Mail: [email protected]:Jim KirkPatrickSteve McDowell

Fork, Log and Lumber (continued)Paddle Top ClampSingle Top Clamp


Fork, UtilityCar BodyConstructionPalletPipe/Pole Grapple


Guarding PackageExcavatorLoader and Dozer

Hammer, HydraulicRake

Clearing and Stacking (w/ and w/o clamps)Loader (w/ and w/o clamps)

Ripper, ToothShear, Hydraulic MobileSnowplow, ReversibleSweeper, Rotary Broom

JRB Company, Inc.

BladeLand ClearingLoader


Tilting Bucket, Loader

Coal/Light MaterialGeneral PurposeGrappleMultipurposeRock, SkeletonRock, Spade NoseRock, Straight EdgeSide DumpSnow/Basket

Compactor, WheelConcrete

CrusherPulverizer

Coupler, Quick Hitch ExcavatorLoader

Fork, Log and LumberDouble Top ClampLog and Lumber

820 Glaser ParkwayAkron, OH 44306330-734-3000800-428-2538 (800-4-BUCKET)Fax: 330-734-3018E-mail: [email protected] Site: www.jrbco.comContact: Paula Theiss

Kenco, Inc.

Fork, UtilityOver The Bucket

GrappleBarrier Lifting

P.O. Box 576Ligonier, PA 15658-0576800-653-6069Fax: 412-238-3187Contact: Bill Douglas

MANUFACTURER INDEX

71

Kent Demolition Tool

Compactor, Vibratory PlateHammer, Hydraulic

711 Lake St.Kent, OH 44240800-527-2282 (outside OH)330-673-5826Fax: 330-677-1616Web site: kentdemolition.comContact:Joe BurgerJeff Crane

Kim Hotstart Mfg. Co., Inc.

Starting Aids, Cold Weather 5723 E. AlkiP.O. Box 11245Spokane WA 99211-0245509-534-6171Fax: 509-534-4216Fax: 800-224-5550Web site: kimhotstart.comContact: Mike Floyd

ShearHydraulic MobileRailroad Rail ProcessorStump

Processor, Universal

LaBounty Manufacturing

Barrel Handler, ExcavatorConcrete,

CrusherPulverizer


GrappleDemolitionGeneral PurposeScrap/Salvage

100 State Road 2Two Harbors, MN 55616800-522-5059218-834-2123Fax: 218-834-3879Contact:Uwe KauschMatt Mahoney

Lake Superior Cabs, Inc.

Cab, Enclosure118 W. Harney RoadEsko, MN 55733800-328-1823Fax 218-879-4640Contact:Dean Myers

MANUFACTURER INDEX

72

Laser Alignment, Inc.

Grade Control, Laser2850 Thornhills S. E.Grand Rapids, MI 49546800-452-7377616-949-7430Fax 616-949-6975E-Mail: [email protected] Site: laseralignment.comContact: Bob Ford

Lincoln Industrial

Lubrication System, CentralOne Lincoln WaySt. Louis, MO 63120314-679-4429Fax: 314-679-4357Fax: 800-424-5359E-Mail: [email protected] Site: lincolnindustrial.comContact: Steve Coburn

Little Falls Machine, Inc.

Blade, Utility DozerCoupler, Quick HitchRipper, ScarifierSnowplow

AirportOne WayReversibleV PlowWing Mounted

305 South West Third St.Little Falls, MN 56345320-632-9266Fax: 320-632-3484Web Site: fallsplows.comContact:Jim Owens (Minnesota & West )Pete Doherty (Wisconsin & East)

Load Rite North America

Scale, PayloadP.O. Box 1139 Burch Prairie, WA 98606-1139360-750-5821Fax: 360-750-5843E-Mail: [email protected]: Russ Whaley

MANUFACTURER INDEX

73

LubriQuip, Inc.

Lubrication System, Central18901 Cranwood ParkwayCleveland, OH 44128800-872-5823216-581-2000Fax: 216-581-8945E-Mail: [email protected] Site: lubriquip.comContact: Ray Teti

RakeBladeBucketClearing and Stacking (w/ and w/o clamps)

Ripper, ToothShear, Stump

Mann Corporation

Bucket, ExcavatorThumb



P.O. Box 478Granite Falls, WA 98252800-688-MANN360-691-5100Fax: 360-691-6134E-mail:[email protected] site: manncorp.comContact: Dan Meyer

McMillen Construction Equipment Attachments

Auger, Hydraulic4419 Ardmore Ave.Ft. Wayne, IN 46809-9723800-234-0964219-747-6750Fax: 219-747-9161Contact: Matt Willman

Lowe Manufacturing Co., Inc.

Auger, HydraulicBox 275Readstown, WI 54652800-356-9180608-629-5101Fax 608-629-5666E-Mail: [email protected]

MANUFACTURER INDEX

74

Morbark

Feller BuncherWith Saw HeadWith Shear

8507 S. Winn RoadP. O. Box 1000Winn, MI 48896800-233-6065517-866-2381Fax: 517-866-2280E-Mail: [email protected] Site: morbark.comContact: Lucky Robison


Fork, UtilityPallet

RippersRear Mounted RadialScarifier

SnowplowReversibleV Plow

New Dymax, Inc.

Bale Clamp, HydraulicBoom, ExtendibleBucket, Excavator

Ditch CleaningPlate Lip, Heavy DutyPlate Lip, Standard DutyThumb

Bucket, LoaderCoal/Light MaterialGeneral PurposeGrapple bucketHigh DumpMultipurposeRock, Spade NoseRock, Straight EdgeSnow/BasketWoodchip

P.O. Box 297402 Miller DriveWamego, KS 66547785-456-2081800-530-5407Fax: 785-456-8328Contact: Derek Diederich

Medford Fabrication

Fork, Log and LumberDouble Top ClampPeeler Block


Fork, UtilityPalletPipe/Pole Grapple

1109 Court St.P.O. Box 1588Medford, OR 97501-0244800-547-5950541-779-1970Fax: 541-779-1976E-Mail: [email protected]: David Thorndike

MANUFACTURER INDEX

75

NPK Construction Equipment, Inc.

Compactor, Vibratory PlateConcrete, CrusherHammer, HydraulicGrapple, General PurposeShear, Hydraulic MobileProcessor, Universal

7550 Indpendence Dr.Walton Hills, OH 44146800-225-4379216-232-7900Fax: 216-232-4382Contact:Joe ObergastRoni BobnarTiffany Thomason

Ohio Magnetics, Inc.

Magnet, Scrap Handling5400 Dunham RoadMaple Heights, OH 44137-3687216-662-8484800-486-6446Fax: 216-662-2911Contact:Walter CivovicMark Fulkerson

Coupler, Quick Hitch ExcavatorLoader


Fork, UtilityPallet

GrappleHeelboom

Guarding Package, ExcavatorRake

Land Clearing

Pacific Services Manufacturing, Inc. (PSM)

Boom, Log LoadingBucket, Excavator

Clam ShellDitch CleaningPlate Lip, Heavy DutyThumb

Bucket, LoaderCoal/Light MaterialGeneral PurposeRock, Spade NoseWoodchip

Compactor, Vibratory Plate

8502 Maltby Rd.Woodinville, WA 98072800-373-3514425-486-1232Fax: 425-486-0803Contact:Paul RaineMike RinabargerJan TressnerBrenda MorantesJill Colon

O.S. Walker

Magnet, Scrap HandlingRockdale StreetWorchester, MA 01606800-962-4638Fax: 508-852-8649E-Mail: [email protected] Site: www.walkermagnet.comContact: James A. Butke

MANUFACTURER INDEX

76

Concrete, CrusherCoupler

Quick Hitch, Excavator Quick Hitch, LoaderRail Car

Fork, Log and LumberDouble Top ClampLog and LumberPaddle Top ClampSingle Top Clamp


Fork, UtilityCar Body

GrappleDemolitionGeneral PurposeOrange Peel

RakeClearing and Stacking (w/ and w/o clamps)Land ClearingLoader (w/ and w/o clamps)

Ripper, ToothShear

Hydraulic MobileStump

Pemberton, Inc.

Arm, RotatingBarrel Handler, ExcavatorBlade, LoaderBoom, ExtendibleBucket, Excavator

Cast LipClam ShellDitch CleaningDrop CenterPlate Lip, Heavy DutyPlate Lip, Standard DutyRipperThumbTiltingTrapezoidal

Bucket, LoaderCoal/Light MaterialGeneral PurposeGrappleHigh DumpLandfillMultipurposeSide DumpRock, SkeletonRock, Spade NoseRock, Straight EdgeTrash GrappleWoodchip

P.O. Box 521000Longwood, FL 32752-1000800-393-6688Fax: 407-831-7995Contact: Sales Department

Paul Wever Construction Equipment Co., Inc.

Arm, Extension Custom Modifications/Special AttachmentsRide Control, Loader

P.O. Box 85Junction I-74 & Rte.117Goodfield IL. 61742800-990-PWCE309-965-2005Fax: 309- 965-2905Contact: Paul Imm

MANUFACTURER INDEX

77

Grapple, ExcavatorBypass Type (log)HeelboomOrange PeelScrap/Salvage

Guarding Package, ExcavatorHarvester, TreeLeveler, Turntable Undercarriage, Rubber Tired


Boom, Excavator Log LoadingScrap Handling, Three

SectionScrap Handling, Two SectionSuper Long Front

Bucket, ExcavatorClamshell

Cab, RiserDelimber, Stroke

P.O. Box 1009Tualatin, OR 97062800-760-3270503-620-9880Fax: 503-620-9885Contact:Dave EhelerJerry ClausenJohn Evens

GrappleDemolitionScrap/Salvage

Pro-Line/Anvil Attachments

Bucket, ExcavatorClamshellPlate Lip, Heavy DutyPlate Lip, Standard Duty

Bucket, Loader DemolitionRock, SkeletonRock, Spade NoseRock, Straight Edge

16650 Buffalo SpeedwayHouston, TX 77047713-991-8500800-354-7795800-335-4722Fax: 713-991-8555E-Mail: [email protected] Site: www.pro-line.comContact: Larry Carlisle

Rake, ExcavatorBucketLand Clearing

Ripper, Tooth

Progressive Attachments Corporation (PAC)

Bucket, ExcavatorPlate LipThumb


Grapple, General Purpose

P.O. Box 1229Granite Falls, WA 98252800-887-4999Fax: 888-329-8486Web site: p-a-c.comContact: Greg Hickman

Rammer, Inc.


CrusherPulverizer

Hammer, Hydraulic

345 Patton Dr. S.W.Atlanta, GA 30336404-505-0005800-248-9776Fax: 404-505-0029Contact: Rick Piper

MANUFACTURER INDEX

78

Compactor, WheelConcrete, CrusherCoupler, Quick Hitch

ExcavatorLoader

Fork, Log and LumberLog and LumberPaddle Top ClampSingle Top Clamp


Fork, UtilityCar BodyConstructionLip MountedOver the BucketPalletPipe/Pole Grapple


Rake BladeClearing and Stacking (w/ and w/o clamps)Loader (w/ and w/o clamps)

Ripper, ToothShear, StumpSnowplow

One WayReversibleV PlowWing Mounted

Rockland Manufacturing Co.

Asphalt Cutter, Bucket MountedBlade

BackfillBank SloperCoalLand ClearingLandfillLoaderU-BladeUtility DozerWoodchip


Cast LipDitch CleaningPavement RemovalPlate Lip, Heavy DutyPlate Lip, Standard DutyThumbTiltingTrapezoidal

Bucket, LoaderCoal/Light MaterialDemolitionEjectorGeneral PurposeGrappleHigh DumpHot SlagLandfillMultipurposeOver the ForkRock, SkeletonRock, Spade NoseRock, Straight EdgeSnow/BasketWoodchip

P.O. Box 5Bedford Industrial ParkBedford, PA 15522800-458-3773814-623-1115Fax: 814-623-7214Contact:Tim DavisBob Shaffer

Risley Equipment Ltd.

Brush Cutter, Rotary/FlailDelimber, StrokeFeller Buncher, With Saw HeadGrapple, Butt and TopGuarding Package

ExcavatorLoader and Dozer

Harvester, Tree

9024 108 St.Grand Prairie, A.B.Canada T8V 4C8403-532-3282Fax: 403-538-1808Contact: Chris Blackmore

MANUFACTURER INDEX

79

Rud Chain, Inc.

Chains, Tire1300 Stoney Point Rd. S.W.P.O. Box 8145Cedar Rapids, Iowa 52408800-553-7993319-390-4040Fax: 319-390-3342E-Mail: [email protected] Site: rudchain.comContact: John Rodemeyer

Fork, Log and LumberDouble Top ClampPaddle Top Clamp

Fork, UtilityCar BodyConstruction

RakeLoader (w/ and w/o clamps)

Ripper, ScarifierSnowplow

AirportOne WayReversibleV plowWing Mounted

Rylind Industries, Inc.

BladeLoader

Boom, ExtendibleBucket, Loader

Coal/Light MaterialGeneral PurposeGrappleHigh DumpMultipurposeRock, Spade NoseSide Dump

Coupler, Quick HitchGraderLoader

7345 So. Pierce St.Littleton, CO 80123303-979-3548Fax: 303-979-4730Contact:Greg WaldaDean Maughan

Sabine

See ACS Industries, Inc.

R.P.M. Tech, Inc.

Snow Blower, Loader184, Rte. 138Cap Sante, P.Q.,Canada GOA 1LO800-463-3882418-285-1811Fax: 418-285-4289E-mail: [email protected] Site: www.rpmtech.qc.caContact: Guy Bourdeau

MANUFACTURER INDEX

80

Spectra Precision, Inc.

Grade Control, Laser5475 Kellenburger RoadDayton, OH 45424-1099800-538-7800937-233-8921Fax: 937-233-7511E-Mail: [email protected] Site: spectraprecision.comContact: Pete Kaz

Stanley Hydraulic Tools

Compactor, Vibratory PlateHammer, Hydraulic

3810 S.E. Naef Rd.Milwaukie OR 97267503-659-5660Fax: 503-652-1780Contact: Larry Pillers

Superior Tire and Rubber Corporation

Cutting Edge, Non MetallicTrack Pads, Non Metallic

P.O. Box 3081818 Pennsylvania Ave WestWarren, PA 16365814-723-2370800-289-1456Fax 814-726-0740E-Mail: [email protected]:Bill LeMeurDave ManningScott Holcomb

SETCO, Solid Tire & Rim (Southeast Tire, Inc.)

Cutting Edge, Non MetallicTire, Solid

P. O. Box 8091600 SeminoleIdabel, OK 74745580-286-6531 (Oklahoma)800-634-2381Fax: 580-286-6743Contact: Sharon Birdsong

MANUFACTURER INDEX

81

Sure Power Industries, Inc.

Converter, ElectricalWarning, Lights

10189 S.W. AveryTualatin, OR 97062800-845-6269503-692-5360Fax: 503-692-9091Contact:Carl SmithGareth Gilpin

Sweepster, Inc.

SweeperBucket Pick UpRotary Broom

2800 N. Zeeb RoadDexter, MI 48130-9797800-456-7100734-996-9116Fax: 734-996-9014E-Mail: [email protected] Site: www.sweepster.comContact:Kathy GrauDoug Amerman

Sy-Klone Company

Precleaner, Air CleanerP.O. Box 550859Jacksonville, FL 32255-0859904-448-6563800-351-8265Fax: 904-448-6626Contact: Robin ThomsonE-Mail: [email protected] Site: sy-klone.com

Teledyne Specialty Equipment CM Products, Inc.


CrusherPulverizer

Hammer, HydraulicProcessor, Universal Shear, Hydraulic Mobile

30625 Solon Industrial Pkwy.Cleveland, OH 44139440-248-7168Fax: 440-248-8645Contact: Frank Cargould

MANUFACTURER INDEX

82

Tramac Corporation


CrusherPulverizer

Hammer, HydraulicPile Driver, VibratoryProcessor, Universal Shear, Hydraulic Mobile

26 Eastmans Rd.Parsippany, NJ 07054800-526-3837 973-887-7700Fax: 973-887-7784E-Mail: [email protected] Site: tramac.comContact: Gary Hesseltine


Grapple, CrawlerBasket Bunching HeadStraddle Mount GrappleTong Head

Bay # 4, 101 Spears RoadQuesnel, B.C., Canada V2J-4Z3800-665-2530250-992-3710Fax: 250-992-3841E-Mail: [email protected]: Alex Brigden

Turbo Industries

Precleaner, Air Cleaner6501 Barberton AvenueCleveland, OH 44102216-281-7810Fax: 216-281-2077Contact: Frank Sanabria (ext. 152)

Tink, Inc.

Bucket, LoaderGrappleHigh DumpTrash Grapple

2361 Durham Dayton HwyDurham, CA 95938800-824-4163530-895-0897Fax: 530-895-0751Contact: Roy Farrell

MANUFACTURER INDEX

83

Valk Manufacturing Co.

Cutting Edge, Non MetallicSnowplow

AirportOne WayReversibleV Plow

P.O. Box 218Carlisle, PA 17013717-766-0711Fax: 717-697-6297Contact:Tim Fry - BladesDan Cribari - Snow Plows

Viking Cives, Inc.

Cutting Edge, Non MetallicSnowplow

AirportOne WayWing Mounted

R.R. #2 Box 36 1/2Harrisville, NY 13648315-543-2321Fax: 315-543-2366Contact: Ron Burns

Wain Roy


Ware Machine Works, Inc.

Backhoe, HydraulicP.O. Box 390Ware, MA 01082413-967-6291Fax: 413-967-7008Contact: Normand R. Breton

MANUFACTURER INDEX

84

Fairlead, For WinchesCrawlerLoader

Fork, Log and LumberDouble Top ClampLog and LumberSingle Top Clamp


Fork, UtilityConstructionPalletPipe/Pole Grapple

GrappleButt and TopButt Type (log)Bypass Type (log)General PurposeHeelboom Orange PeelScrap/Salvage

Guarding Package ExcavatorLoader and Dozer

RakeBladeClearing and Stacking (w/ and w/o clamps)Land ClearingLoader (w/ and w/o clamps)

RipperRear Mounted ParallelScarifierTooth

ShearsHydraulic MobileStump

Snowblower, LoaderSnowplow

One WayReversibleV PlowWing GateWing Mounted

Splitter, Stump

Weldco-Beales Manufacturing Ltd.

Arm, Extension Barrel Handler, LoaderBoom

ExtendibleForestry, High Lift Log LoadingScrap Handling, Three SectionScrap Handling, Two SectionSuper Long Front

Brush CutterBucket, Excavator

Cast LipClam ShellDitch CleaningDrop CenterPlate Lip, Heavy DutyThumbTiltingTrapezoidalV-Line Frost

Bucket, LoaderCoal/Light MaterialDemolitionGeneral PurposeGrappleHigh DumpMultipurposeOver the ForkRock, SkeletonRock, Spade NoseRock, Straight EdgeSide DumpSnow/Basket

BladeBackfillBank SloperCoalLand ClearingLandfillLoaderU-BladeUtility DozerWoodchip

Cab, RiserCoupler, Quick Hitch

ExcavatorLoaderGrader

U.S.A.2328 Roosevelt AvenueEnumclaw, WA98022-008800-547-6357360-825-3581Fax: 360-825-4009E-Mail: [email protected] Site: weldco-beales.com/Contact: Sales Department

Canada12155-154 StreetEdmonton, Alberta Canada T5V 1J3403-454-5244800-661-4155Fax: 403-455-6770E-Mail: [email protected]: Doug Schindel

MANUFACTURER INDEX

85

Compactor, WheelCoupler, Quick Hitch

Excavator Loader

Fork, Log and LumberDouble Top ClampPaddle Top Clamp

Fork, UtilityCar BodyConstructionOver the Bucket

GrappleDemolitionGeneral PurposeScrap/Salvage

RakeLand ClearingLoader (w/o clamps)

Ripper, Tooth

Werk-Brau Company, Inc.

Arm, ExtensionBoom, ExtendibleBucket, Excavator

Cast LipCoral RockDitch CleaningDrop CenterPavement RemovalPlate Lip, Heavy DutyPlate Lip, Standard DutySand/Flat BottomThumbTiltingTrapezoidalV-Line Frost

Bucket, LoaderCoal/Light MaterialGeneral PurposeGrappleMultipurposeRock, SkeletonRock, Spade NoseRock, Straight EdgeSnow/Basket

616 N. BlanchardFindlay, OH 45839800-537-9561419-422-2912Fax: 419-422-7207E-Mail: [email protected]: Joe Blem


Fork, UtilityCar BodyConstructionPalletPipe/Pole Grapple

Wicker Machine Company

Bucket, LoaderCoal/Light MaterialGeneral PurposeOver the ForkWoodchip

Fork, Log and LumberDouble Top ClampLog and LumberPaddle Top ClampSingle Top Clamp

1400 East Ave. NorthHollandale, MS 38748800-748-9476601-827-5434Fax: 601-827-7800Contact: Allan Wicker

MANUFACTURER INDEX

86


Grapple, Demolition Ripper, Tooth

Woods Equipment Company

Bucket, ExcavatorDitch ClearingJaw Plate Lip, Heavy DutyPlate Lip, Standard DutyRipperThumb

P.O. Box 1000Oregon, IL 61061800-319-6637 (800-31-WOODS)Fax: 800-399-6637Web Site: www.woodsonline.comContact: Dealer Services

Cab, RiserFork, Millyard

Double Top ClampGrapple

Butt and TopButt Type (log)Bypass Type (log)General PurposeHeelboomOrange PeelScrap/ Salvage

Guarding Package, Excavator

Young Corporation

BladeCoalLandfillLoaderU-BladeWoodchip

BoomLog LoadingScrap Handling, Three SectionScrap Handling, Two SectionSuper Long Front

Bucket, ExcavatorClam ShellDitch Cleaning

3231 Utah Ave. SouthP. O. Box 3522Seattle, WA 98124800-321-9090 (Except WA )206-624-1071Fax: 206-682-6881Contact: Randy Johnson

NOTES

NOTES

NOTES

Komatsu America International Company440 N. Fairway Dr., Vernon Hills, IL 60061

AESG216-00 Printed in USA D-4/98(7.5M) 4/98 (EV-1)

www.KomatsuAmerica.com Materials and specifications are subject to change without noticeis a trademark of Komatsu Ltd. Japan

Documents

KOM Attach FINAL