The first big improvement we made to our Boomer Wearable was to increase the strength of the magnet. We now use 4 x RARE EARTH disc magnets (otherwise known as Neodymium).

Rare Earth magnets are the most advanced magnet with superior performance. Each disc has the pull strength of 893 grams. Our BoomerWearable uses 4 discs, with a total pull strength of 1.8kg (the total weight of the Boomer Wearable is only 53 grams)!!

We are now ultra confident that the Boomer Wearable will solidlyattach to most clothing. The Boomer Wearable acheives optimum results especially with cycling jerseys or material of similar thickness.

The highly anticipated, NEW AND IMPROVED Boomer Wearable is finally here. Due to feedback from the salesman samples as well as our own testing we have made significant changes... such as increasing the strength of the magnet, improving the seal to make it 100% waterproof and removing the seat post attachment.

Read on for all the geeky ins and outs about these changes & for more technical Boomer Wearable facts.

CheersMike and Leah

GarmentMagnetattachmentRemove magnetic tag

How to use the magnet

Geek SheetTechs & Specs

Boomer WearableIssue Six

New Magnet!

*Ultimately we would always encourage users to test their Boomer Wearable before their journey. We’re confident

it will work for most materials, but then again if you’re riding

in a bear suit then we can’t guarantee it will hold!

Boomer WearableWHAT MAKES IT SO GOOD?

We have revised the compression seal between the two housings to ensure that the Boomer Wearable is WATERPROOF!This means that we’re super confident that the Boomer Wearable will be a trusty steed, in all types of shitty weather.

The Boomer Wearable is the same brightness as our brilliant Boomer Original! With a Burn Time of 12 hours (constant) and36 hours (flashing) and 4 modes (Strobe Flash, Strobe Pulse,Random Strobe and Constant). Bang bang bright!!

We decided to remove the additional Seat Post Mount that theBoomer Wearable previously came with. In the end we felt that this mount was unnecessary as this is a WEARABLE light.

We’ve upgraded our PCB (electrical circuit) and implemented an anti-shock function. This means that when you ride over a bumpor your light is knocked it will NOT interrupt the light mode.

As well as being able to attach to fabric, the Boomer Wearable alsofeatures an integrated clip to enable attachment to clothes, pockets,bags, belts, collars, bras, undies and grundies.

CLIP ATTACHMENT

IT’S WATERPROOF!

EASY TO REPLACE BATTERIES

IT’S BOOMER BRIGHT!

REMOVAL OF SEAT POST MOUNT

TECHS AND SPECS

UPDATED ELECTRONICS

Garment

59 x 32 x 3412 hrs (constant) 36 hrs (strobe flashing)

452 x AAA includedSuper-bright HIGH powered red LED<20 Lumens1. Strobe Flash 2. Strobe Pulse 3. Random Strobe 4. SteadyWaterproof, superslim, TPR body, integrated lens,hold button down to ‘turn off’ in any mode.

If moisture forms inside the unit please clean before use.Safety light only.

BURN TIMEDIMENSIONS (MM)

WEIGHT (G)BATTERY

LED SPECIFICATIONS

MODESLIGHT OUTPUT

FEATURES

NOTE

CLICK!

3. Replace rear casing, ensuring it ‘snaps’ together for a proper fit

1. Flip Boomer over and remove rear housing by twisting coin in slot

2. Replace 2 x AAA batteries ensuring battery poles are aligned properly

www.knog.com.au