6
KINETICS TM Restrained Spring Isolators Model FLS-1 and FLS-2 Description Kinetics Model FLS vibration isolators consist of free- standing, large diameter, laterally stable steel springs assembled into welded steel housing assemblies fabricated to limit vertical movement of the isolated equipment if equipment loads are reduced, or if the equipment is subjected to large vertical external forces. The housings also provide a constant free and operating height to facilitate installation. Spring elements are complete with internal noise isolation pads and have an adjusting and leveling bolt as a part of the top load plate assembly. Springs are polyester powder coated, with a 1000-hour salt spray rating per ASTM B-117. Holes are provided in all isolators for bolting to the structure and to the supported equip- ment. The isolator can be welded to the structure as well. To assure stability, the springs have lateral spring stiffness greater than 1.0 times the rated verti- cal stiffness, and are designed to provide a minimum of 50% overload capacity. FLS Springs are available with deflections to 2" (51 mm) and with load capaci- ties to 18,000 lbs. (8165 kg) as standard products. Custom isolators with higher deflection and greater load capabilities are available. Kinetics Model FLS spring isolators are recommended for the isolation of vibration producing equipment carrying a large fluid load which may be drained, such as boilers and chillers, and for the isolation of outdoor components such as cooling towers, air-cooled condensers, etc., where wind loads are minimal. Application Kinetics Model FLS vertically restrained spring isolation mounts are recommended as a noise and vibration isolator for mechanical equipment located near critically quiet areas, when the equipment to be isolated has significant changes of weight during maintenance operations, and for equipment subjected to moderate external forces or wind loads. Operating static deflections are available up to 2" (51 mm) to compensate for long span flexible floor structures and maintain a high degree of noise and vibration isolation. Specification Vibration isolators for equipment which are subject to load variations and large external or torquing forces shall consist of large diameter, laterally stable steel springs assembled into welded steel housing assemblies designed to limit vertical movement of the supported equipment. Housing assembly shall be of fabricated steel mem- bers and shall consist of a top load plate complete with adjusting and leveling bolts, vertical restraints, isolation washers and a bottom plate with internal non-skid noise isolation pads and holes provided for anchoring to supporting structure. Housing shall be hot dip galvanized for corrosion resistance. Housing should be designed to provide a constant free and operating height within 1/8" (0.06 mm). Spring elements shall have a lateral stiffness greater than 1.0 times the rated vertical stiffness and shall be designed to provide a minimum of 50% overload capacity. Springs shall be selected to provide static deflections shown on the Vibration Isolation Schedule or as indicated on the project documents. Springs shall be color coded or otherwise identified to indicate load capacity. Vibration isolators shall be Model FLS, as manufactured by Kinetics Noise Control, Inc.

KINETICSTM Restrained Spring Isolators Model FLS-1 and FLS-2 DATA SHEET.pdfModel FLS-1 and FLS-2 Description Kinetics Model FLS vibration isolators consist of free-standing, large

  • Upload
    others

  • View
    23

  • Download
    0

Embed Size (px)

Citation preview

  • KINETICSTMRestrained Spring Isolators

    Model FLS-1 and FLS-2

    DescriptionKinetics Model FLS vibration isolators consist of free-standing, large diameter, laterally stable steel springs assembled into welded steel housing assemblies fabricated to limit vertical movement of the isolated equipment if equipment loads are reduced, or if the equipment is subjected to large vertical external forces. The housings also provide a constant free and operating height to facilitate installation. Spring elements are complete with internal noise isolation pads and have an adjusting and leveling bolt as a part of the top load plate assembly. Springs are polyester powder coated, with a 1000-hour salt spray rating per ASTM B-117. Holes are provided in all isolators for bolting to the structure and to the supported equip-ment. The isolator can be welded to the structure as well. To assure stability, the springs have lateral spring stiffness greater than 1.0 times the rated verti-cal stiffness, and are designed to provide a minimum of 50% overload capacity. FLS Springs are available with deflections to 2" (51 mm) and with load capaci-ties to 18,000 lbs. (8165 kg) as standard products. Custom isolators with higher deflection and greater load capabilities are available. Kinetics Model FLS spring isolators are recommended for the isolation of vibration producing equipment carrying a large fluid load which may be drained, such as boilers and chillers, and for the isolation of outdoor components such as cooling towers, air-cooled condensers, etc., where wind loads are minimal.

    ApplicationKinetics Model FLS vertically restrained spring isolation mounts are recommended as a noise and vibration isolator for mechanical equipment located near critically quiet areas, when the equipment to be isolated has significant changes of weight during maintenance operations, and for equipment subjected to moderate external forces or wind loads.

    Operating static deflections are available up to 2" (51 mm) to compensate for long span flexible floor structures and maintain a high degree of noise and vibration isolation.

    SpecificationVibration isolators for equipment which are subject to load variations and large external or torquing forces shall consist of large diameter, laterally stable steel springs assembled into welded steel housing assemblies designed to limit vertical movement of the supported equipment.

    Housing assembly shall be of fabricated steel mem-bers and shall consist of a top load plate complete with adjusting and leveling bolts, vertical restraints, isolation washers and a bottom plate with internal non-skid noise isolation pads and holes provided for anchoring to supporting structure. Housing shall be hot dip galvanized for corrosion resistance. Housing should be designed to provide a constant free and operating height within 1/8" (0.06 mm).

    Spring elements shall have a lateral stiffness greater than 1.0 times the rated vertical stiffness and shall be designed to provide a minimum of 50% overload capacity.

    Springs shall be selected to provide static deflections shown on the Vibration Isolation Schedule or as indicated on the project documents. Springs shall be color coded or otherwise identified to indicate load capacity. Vibration isolators shall be Model FLS, as manufactured by Kinetics Noise Control, Inc.

  • IsolatorType

    FLS-1-35FLS-1-70FLS-1-120FLS-1-220FLS-1-370FLS-1-500FLS-1-600FLS-1-700FLS-1-805

    FLS-1-50FLS-1-100FLS-1-250FLS-1-450FLS-1-625FLS-1-800FLS-1-1000FLS-1-1250FLS-1-1700FLS-1-2200FLS-1-2465FLS-1-2865FLS-1-3500

    FLS-1-2500FLS-1-3400FLS-1-4400FLS-1-4930FLS-1-5730FLS-1-7000

    FLS-1-5000FLS-1-6800FLS-1-8800FLS-1-9860FLS-1-11460FLS-1-14000

    SpringColor

    BlueGreenGrayBrownOrangeBeigeChromeBeige/WhtChrm/Wht

    BeigeChromeBlueGreenBlackGrayRedBrownOrangeOrg/GrayBlueBlue/GrayBlue/Brn

    BrownOrangeOrg/GrayBlueBlue/GrayBlue/Brn

    BrownOrangeOrg/GrayBlueBlue/GrayBlue/Brn

    lbs.

    3570120220370500600700805

    501002504506258001000125017002200246528653500

    250034004400493057307000

    50006800880098601146014000

    kg

    163254100168227272318365

    2345113204283363454567771998111813001588

    113415421996223625993175

    227030853992447251986350

    RatedCapacity

    in.

    1.521.361.181.070.961.001.001.001.01

    1.001.001.791.541.441.311.151.090.951.001.001.001.00

    1.090.951.001.001.001.00

    1.091.001.001.001.001.00

    mm

    393530272425252526

    25254539373329282426252525

    282426252525

    282525252525

    RatedDeflection

    in.

    1.751.751.751.751.751.751.751.751.75

    3.003.003.003.003.003.003.003.003.003.003.003.003.00

    3.003.003.003.003.003.00

    3.003.003.003.003.003.00

    mm

    444444444444444444

    76767676767676767676767676

    767676767676

    767676767676

    SpringO.D.

    in.

    6.506.506.506.506.506.506.506.506.50

    8.758.758.758.758.758.758.758.758.758.758.758.758.75

    14.0014.0014.0014.0014.0014.00

    16.5016.5016.5016.5016.5016.50

    mm

    165165165165165165165165165

    222222222222222222222222222222222222222

    356356356356356356

    419419419419419419

    Lin.

    3.003.003.003.003.003.003.003.003.00

    4.004.004.004.004.004.004.004.004.004.004.004.00 4.00

    4.004.004.004.004.004.00

    8.008.008.008.008.008.00

    mm

    767676767676767676

    102102102102102102102102102102102102102

    102102102102102102

    203203203203203203

    Win.

    0.560.560.560.560.560.560.560.560.56

    0.690.690.690.690.690.690.690.690.690.690.690.690.69

    0.690.690.690.690.690.69

    0.810.810.810.810.810.81

    mm

    141414141414141414

    17171717171717171717171717

    171717171717

    212121212121

    Din.

    0.440.440.440.440.440.440.440.440.44

    0.560.560.560.560.560.560.560.560.560.560.560.560.56

    0.560.560.560.560.560.56

    0.690.690.690.690.690.69

    mm

    111111111111111111

    14141414141414141414141414

    141414141414

    171717171717

    din.

    4.444.444.444.444.444.444.444.444.44

    6.256.256.256.256.256.256.256.256.256.256.256.256.25

    6.886.886.886.886.886.88

    7.507.507.507.507.507.50

    mm

    113113113113113113113113113

    159159159159159159159159159159159159159

    175175175175175175

    191191191191191191

    H

    FLS-1-5000/15000

    FLS-1-35/805FLS-1-50/3500FLS-2-100/1975FLS-2-2000/4500

  • IsolatorType

    FLS-2-100FLS-2-135FLS-2-185FLS-2-225FLS-2-250FLS-2-375FLS-2-500FLS-2-625FLS-2-750FLS-2-875FLS-2-995FLS-2-1120FLS-2-1400FLS-2-1600FLS-2-1975

    FLS-2-2000FLS-2-2500FLS-2-2750FLS-2-3025FLS-2-3250FLS-2-3500FLS-2-3900FLS-2-4100FLS-2-4500

    FLS-2-4000FLS-2-5000FLS-2-5500FLS-2-6050FLS-2-6500FLS-2-7000FLS-2-7800FLS-2-8200FLS-2-9000

    FLS-2-8000FLS-2-10000FLS-2-11000FLS-2-12100FLS-2-13000FLS-2-14000FLS-2-15600FLS-2-16400FLS-2-18000

    SpringColor

    GrayBeigeBrownGrey/BrnBlueBlue/BrnGreenGrn/BrnBlackBlack/BrnOrangeOrg/BrnOrg/GrnRedRed/Grn

    OrangeBlueBlue/BlueBlue/GrnBlue/BlkBlu/OrgBlu/Org/GrnBlue/RedBlu/Red/Grn

    OrangeBlueBlue/BlueBlue/GrnBlue/BlkBlu/OrgBlu/Org/GrnBlue/RedBlue/Red/Grn

    OrangeBlueBlue/BlueBlue/GrnBlue/BlkBlue/OrgBlu/Org/GrnBlue/RedBlu/Red/Grn

    lbs.

    1001351852252503755006257508759951120140016001975

    200025002750302532503500390041004500

    400050005500605065007000780082009000

    80001000011000121001300014000156001640018000

    kg

    456184102113170227283340397451508635726896

    90511351245137514751588176918452025

    181522702495274529503175353836904050

    362545354990549058956350707673808100

    RatedCapacity

    in.

    2.002.002.002.002.002.002.002.002.002.002.002.002.012.001.98

    2.002.002.002.002.002.022.032.032.03

    2.002.002.002.002.002.022.032.002.00

    2.002.002.002.002.002.002.002.002.00

    mm

    515151515151515151515151515150

    515151515151525252

    515151515151525151

    515151515151515151

    RatedDeflection

    in.

    3.503.503.503.503.503.503.503.503.503.503.503.503.503.503.50

    5.005.005.005.005.005.005.005.005.00

    5.005.005.005.005.005.005.005.005.00

    5.005.005.005.005.005.005.005.005.00

    mm

    898989898989898989898989898989

    127127127127127127127127127

    127127127127127127127127127

    127127127127127127127127127

    SpringO.D.

    in.

    9.009.009.009.009.009.009.009.009.009.009.009.009.009.009.00

    10.7510.7510.7510.7510.7510.7510.7510.7510.75

    17.5017.5017.5017.5017.5017.5017.5017.5017.50

    21.5021.5021.5021.5021.5021.5021.5021.5021.50

    mm

    229229229229229229229229229229229229229229229

    273273273273273273273273273

    445445445445445445445445445

    546546546546546546546546546

    Lin.

    5.005.005.005.005.005.005.005.005.005.005.005.005.005.005.00

    5.005.005.005.005.005.005.005.005.00

    6.006.006.006.006.006.006.006.006.00

    11.0011.0011.0011.0011.0011.0011.0011.0011.00

    mm

    127127127127127127127127127127127127127127127

    127127127127127127127127127

    152152152152152152152152152

    279279279279279279279279279

    Win.

    0.690.690.690.690.690.690.690.690.690.690.690.690.690.690.69

    0.690.690.690.690.690.690.690.690.69

    0.690.690.690.690.690.690.690.690.69

    1.061.061.061.061.061.061.061.061.06

    mm

    171717171717171717171717171717

    171717171717171717

    171717171717171717

    272727272727272727

    Din.

    0.560.560.560.560.560.560.560.560.560.560.560.560.560.560.56

    0.560.560.560.560.560.560.560.560.56

    0.560.560.560.560.560.560.560.560.56

    0.690.690.690.690.690.690.690.690.69

    mm

    141414141414141414141414141414

    141414141414141414

    141414141414141414

    171717171717171717

    din.

    8.008.008.008.008.008.008.008.008.008.008.008.008.008.008.00

    10.0010.0010.0010.0010.0010.0010.0010.0010.00

    10.0010.0010.0010.0010.0010.0010.0010.0010.00

    11.0011.0011.0011.0011.0011.0011.0011.0011.00

    mm

    203203203203203203203203203203203203203203203

    254254254254254254254254254

    254254254254254254254254254

    279279279279279279279279279

    H

    FLS-2-8000/18000FLS-1-2500/7000FLS-2-4000/9000

  • FLS 1 and 2 - 11/11

    United States6300 Irelan Place P.O. Box 655Dublin, Ohio 43017Phone: 614-889-0480Fax: 614-889-0540

    Canada3570 Nashua Drive

    Mississauga, OntarioL4V 1L2

    Phone: 905-670-4922Fax: 905-670-1698

    [email protected]

    Kinetics Noise Control, Inc. is continually upgrading the quality of our products. We reserve the right to make changes to this and all products without notice.

  • KINETICSTMRestrained Spring Isolators

    Model FLS-4

    DescriptionKinetics Model FLS Vibration Isolators consist of free-standing large diameter laterally stabile steel springs assembled into welded steel housing assemblies fabricated to limit vertical movement of the isolated equipment if equipment loads are reduced, or if the equipment is subjected to large external forces. The housings also provide a constant free and operating height to facilitate installation. Spring elements are complete with internal noise isolation pads and have an adjusting and leveling bolt as a part of the top load plate assembly. Springs are polyester powder coated, with a 1000 hour salt spray rating per ASTM B-117. Holes are provided in all isolators for bolting to the structure and to the supported equipment. The isolator can be welded to the structure as well. To assure stability, the springs have a lateral spring stiffness greater than 1.2 times the rated vertical stiff-ness, and are designed to provide a minimum of 50% overload capacity. FLS springs are available with deflections to 4 in. (102 mm) and with load capacities to 23,200 lbs. (10,524 kg) as standard products. Custom isolators with higher deflections and greater load capabilities are also available.

    ApplicationKinetics Model FLS vertically restrained spring isolation mounts are recommended as a noise and vibration isolator for mechanical equipment located near critically quiet areas, when the equipment to be isolated has significant changes of weight during maintenance operations, and for equipment subject-ed to external forces or high wind loads. Model FLS mounts are typically used to reduce the transmission of noise and vibration into supporting structures from equipment carrying a large fluid load that may be drained, such as boilers, cooling tower and chillers, and cooling towers which also require hold-down for wind loads.

    Operating static deflections are available up to 4 in. (102 mm) to compensate for long span flexible floor structures and maintain a high degree of noise and vibration isolation.

    SpecificationVibration isolators for equipment which is subject to load variations and large external or torquing forces shall consist of large diameter laterally stabile steel springs assembled into welded steel housing assemblies designed to limit vertical movement of the supported equipment.

    Housing assemblies shall be fabricated steel members and shall consist of a top load plate complete with adjusting and leveling bolts, vertical restraints, isolation washers and a bottom plate with internal non-skid noise isolation pads. Housing shall be electrozinc plated or hot dip galvanized for corrosion resistance. Housing should be designed to provide a constant free and operating height within 1/8 in. (0.06 mm). Spring elements shall have a lateral stiffness greater than 1.2 times the rated vertical stiffness and shall be designed to provide a minimum of 50% over-load capacity. Non-welded spring elements shall be polyester powder coated, and shall have a 1000 hr rating when tested in accordance with ASTM B-117.

    Springs shall be selected to provide static deflectionsshown on the Vibration Isolation Schedule or as indicated on the project documents. Springs shall be color coded or otherwise identified to indicate load capacity. Vibration isolators shall be Model FLS, as manufactured by Kinetics Noise Control, Inc.

  • FLS-4 6/12

    United States6300 Irelan Place P.O. Box 655Dublin, Ohio 43017Phone: 614-889-0480Fax: 614-889-0540

    Canada3570 Nashua Drive

    Mississauga, OntarioL4V 1L2

    Phone: 905-670-4922Fax: 905-670-1698

    [email protected]

    Kinetics Noise Control, Inc. is continually upgrading the quality of our products. We reserve the right to make changes to this and all products without notice.

    IsolatorType

    FLS-4-100FLS-4-250FLS-4-500FLS-4-750FLS-4-1000FLS-4-1250FLS-4-1600

    FLS-4-2250FLS-4-2500FLS-4-2750FLS-4-3000FLS-4-3250FLS-4-3500FLS-4-3850FLS-4-4200FLS-4-4450FLS-4-4700FLS-4-4950FLS-4-5200FLS-4-5450FLS-4-5800

    FLS-4-5500FLS-4-6000FLS-4-6500FLS-4-7000FLS-4-7700FLS-4-8400FLS-4-8900FLS-4-9400FLS-4-9900FLS-4-10400FLS-4-10900FLS-4-11600

    FLS-4-11000FLS-4-12000FLS-4-13000FLS-4-14000FLS-4-15400FLS-4-16800FLS-4-17800 FLS-4-18800FLS-4-19800FLS-4-20800FLS-4-21800FLS-4-23200

    SpringColor

    GrayBlueGreenBlackRedBrownOrange

    BeigeBeige/BlueBeige/GrnBeige/BlkBeige/RedBeige/BrnBeige/OrgChromeChr/BlueChr/GrnChr/BlkChr/RedChr/BrnChr/Org

    Beige/GrnBeige/BlkBeige/RedBeige/BrnBeige/OrgChromeChr/BlueChr/GreenChr/BlackChr/RedChr/BrownChr/Org

    Beige/GrnBeige/BlkBeige/RedBeige/BrnBeige/OrgChromeChr/BluChr/GrnChr/BlkChr/RedChr/BrnChr/Org

    lbs.

    100250500750100012501600

    22502500275030003250350038504200445047004950520054505800

    550060006500700077008400890094009900104001090011600

    110001200013000140001540016800178001880019800208002180023200

    kg

    45113227340454567726

    10211134124713611474158817461905201821322245235924722631

    249527222948317534933810403742644491471749445262

    4990544358976350698576208074852889819435988810523

    RatedCapacity

    in.

    4.004.004.004.004.004.004.00

    4.004.004.004.004.004.004.004.004.004.004.004.004.004.00

    4.004.004.004.004.004.004.004.004.004.004.004.00

    4.004.004.004.004.004.004.004.004.004.004.004.00

    mm

    102102102102102102102

    102102102102102102102102102102102102102102

    102102102102102102102102102102102102

    102102102102102102102102102102102102

    RatedDeflection

    in.

    5.635.635.635.635.635.635.63

    8.008.008.008.008.008.008.008.008.008.008.008.008.008.00

    8.008.008.008.008.008.008.008.008.008.008.008.00

    8.008.008.008.008.008.008.008.008.008.008.008.00

    mm

    143143143143143143143

    203203203203203203203203203203203203203203

    203203203203203203203203203203203203

    203203203203203203203203203203203203

    SpringO.D.

    in.

    10.7510.7510.7510.7510.7510.7510.75

    15.5015.5015.5015.5015.5015.5015.5015.5015.5015.5015.5015.5015.5015.50

    25.5025.5025.5025.5025.5025.5025.5025.5025.5025.5025.5025.50

    27.0027.0027.0027.0027.0027.0027.0027.0027.0027.0027.0027.00

    mm

    273273273273273273273

    394394394394394394394394394394394394394394

    648648648648648648648648648648648648

    686686686686686686686686686686686686

    Lin.

    6.006.006.006.006.006.006.00

    8.008.008.008.008.008.008.008.008.008.008.008.008.008.00

    8.008.008.008.008.008.008.008.008.008.008.008.00

    17.0017.0017.0017.0017.0017.0017.0017.0017.0017.0017.0017.00

    mm

    152152152152152152152

    203203203203203203203203203203203203203203

    203203203203203203203203203203203203

    432432432432432432432432432432432432

    Win.

    0.690.690.690.690.690.690.69

    0.690.690.690.690.690.690.690.690.690.690.690.690.690.69

    0.810.810.810.810.810.810.810.810.810.810.810.81

    0.810.810.810.810.810.810.810.810.810.810.810.81

    mm

    17171717171717

    1717171717171717171717171717

    212121212121212121212121

    212121212121212121212121

    Din.

    0.560.560.560.560.560.560.56

    0.690.690.690.690.690.690.690.690.690.690.690.690.690.69

    0.690.690.690.690.690.690.690.690.690.690.690.69

    0.690.690.690.690.690.690.690.690.690.690.690.69

    mm

    14141414141414

    1717171717171717171717171717

    171717171717171717171717

    171717171717171717171717

    din.

    14.0014.0014.0014.0014.0014.0014.00

    17.2517.2517.2517.2517.2517.2517.2517.2517.2517.2517.2517.2517.2517.25

    17.2517.2517.2517.2517.2517.2517.2517.2517.2517.2517.2517.25

    17.2517.2517.2517.2517.2517.2517.2517.2517.2517.2517.2517.25

    mm

    330330330330330330330

    378378378378378378378378378378378378378378

    378378378378378378378378378378378378

    381381381381381381381381381381381381

    H

    fls12fls4