1

Contents

Instruction………………………………………1

Set up………….…………………………………2 I. Image setting……………………………………2

1.Quality………………………………………………………………2 2.Frame Rate……………………………………………………… 3 3.Resolution…………………………………………………………4

II. Rec. setting………………………………………4 1.Scheduled Time……………………………………………………4 2.Overwrite…………………………………………………………5 3.Section……………………………………………………………6 4.Motion Detection…………………………………………………6

1) Mask Area………………………………………………………6 2) Sensitivity………………………………………………………7 3) Speed……………………………………………………………8 4) Noise Margin……………………………………………………8

III. Rec. mode………………………………………9 a) Manual…………………………………………………………9 b) Scheduled………………………………………………………9 c) Motion Detection………………………………………………9

IV. Playback………………………………………10 a) Playback & Stop………………………………………………11 b) Delete Files……………………………………………………12

V. System setting…………………………………12 a) Language………………………………………………………13 b) Time……………………………………………………………13 c) Format…………………………………………………………14 d) Card Info. ……………………………………………………14

Parameter……………………………………15

2

This is a D1 resolution DVR, use 32GB SD card memory. Users have 3 choice for different resolution: 704*576（DVD resolution）,640X576 and 320*288. It also support scheduled working and motion detection, when the memory is full, DVR will overwrite videos automatically.

1. D1 resolution at 704*576. DVD picture quality up to 500 TV line. 2, video format: MPEG4/AVI, audio format: MP3 3, Time stamp on pictures 4, Overwriting when memory is full 5, Record video or snap shot optional 6, 5, 15, 30 frame per second optional 7, Support 32GB SD card memory (HCSD card supported also) 8, AV out supported 9, Support Mpeg4/AVI FILE 10, Motion detection start recording and snap shot Introduction Keyboard

Key Function ▲ Up/ volume up

▼ Down/ volume down ▲ Left/fast forward

▲ Right/fast reverse

OK OK/Rec MENU Menu

P/P Play/pause/delete files STOP Stop recording/stop playback

ESC ESC/playback

3

Set up Press “Menu” on keyboard to enter the following screen.

4

I. Image setting Press “OK” to enter image setting to set image’s quality/ frame rate/

resolution.

1. Press “OK” to enter image quality function, can set to be three types:

High /medium /low

2. Press “OK” to set the frame: 30f/s, 15f/s or 5f/s. when you select 30f/s, the recorded video is real time.

5

3. Press ”OK” to set the resolution: D1/ VGA/ QVGA. The D1 video quality

is better than VGA, VGA is better than QVGA.

II. Recording Setting Press “Ok” to enter recording setting, can set Scheduled time/ Overwrite/ Section/ Motion detection.

6

1. Press “OK” to enter scheduled time function, can set the record period as following picture shows:

2. Press ”OK” to enter overwrite function, “Yes” means when memory is full,

it will cover the earliest video automatically to keep the record going; “No” means when memory is full, it will stop record.

7

3. Press”OK” to enter section function, can choose to set the video save as 15minutes/30minutes/one hour in a separate file.

4. Press “OK” to enter motion detection, can set following functions: mask area/ sensitivity/ speed/ noise (this function only effective under recording mode).

8

9

1) Press “OK” to enter “mask area” function as following picture: you can set cover or open each little square one by one.

2) Press “OK” to enter ”Sensitivity” function to set high/ middle/ low detection sensitivity.

3) Press”OK” to enter “Speed” function to set high/ middle/ low speed detection sensitivity.

10

4) Press “OK” to enter “Noise Margin” to adjust the recording voice high/middle/low based on the environment voice.

III. Recording Mode: 4 modes to trigger recording (alarm function and motion detection with alarm function not available): l Manual recording: Choose the “OK” button to record. l Set time recording: you could set a certain time to record, pls enter into the

menu “Recording Setting” , set the time in “Reservation Time” l Motion detection recording: anything move triggered the recording l Power-up recording: automatically recording when power up.

11

IV. Playback: Press shift key to choose which file you want to play back, press”OK” to enter, Press P/P key to start play back the video Press shift key to choose which file you want to play back

12

Press OK to enter

Press P/P key to play back the video

Press P/P key to stop playing, and press P/P again to continue playback

13

Choose the file you want, and then press “P/P” can delete the file.

VI. System Settings: Press “OK” to enter system settings to set the language/ time/ format/ SD card info/ alarm period.

14

1. Press “OK” to enter language function to choose English/Traditional

Chinese/ Simple Chinese

2. Press “OK” to enter time function to set the time which will stamp on video.

15

3. Press “OK” to enter format function to format the useless videos.

4. Press “OK” to enter card info to check the sd card capacity, how much has used and to be use.

16

VI. The alarm function is not available in this version.

Parameter

Video Format Mpeg -4, Video for ASF Resolution 704*576, 640*576, 320*288 Frame 30f/s, 15f/s, 5f/s Video input 1V,75Ω Video output 1V,75Ω Memory Media SD/ SDHC Card for 32GB

Working theory Manual recording Yes Schedule recording Yes Motion detective recording Yes

Power up recording Yes Power Electricity Input DC 5V-30V Power expend <2W Weight & Size G.W./Set 580g Gift box size 20*13*6.5cm Language

English, Traditional Chinese, Simple Chinese

17

注意事项 严禁 SD 卡热插拔，当录像模式选为移动侦测或警报（开机 rec），返回preview 时，直接进入 detecting 或者 rec，在这两种模式下，禁止 SD卡热插拔，否则可能造成死机。

机器特色

1. 断电保护录像功能，内置电池，当机器突发意外断电，正在录像的文件不会丢失。

2. 多种录像模式：手动录像、预约录像、移动侦测、开机录像 3. 宽电压输入，可以支持 5-30V 的工作电压范围 4. 具有文件覆盖功能，自动循环录像，SD 卡空间小于 300M 时，自

动删除最早文件。 5. 时间信息、记忆卡信息可查询 6. 最大支持 32G SDHC 7. MPEG4 压缩格式，可以达到 DVD 效果，1G 卡录像时间最少 1

小时（D1@30FPS） 8. 多种录像格式，D1/VGA/QVGA，多种帧率可选 5/15/30fps。

操作说明 1. UP(↑) 向上，操作菜单向上，回放时 volume+ 2. DOWN(↓) 向下，操作菜单向下，回放时 volume- 3. LEFT(←) 向左，在 files 里上翻，回放快进 xN 4. RIGHT(→) 向右，在 files 里下翻，回放快退 xN 5. OK 确定键，preview 中，手动录像开启键 6.MENU 菜单键，一键进入菜单（返回 preview） 7.P/P play/pause, 播放/暂停键，在文件夹模式下删除文件 8.STOP 停止键，停止文件播放或停止录像 9.ESC 返回键，在 preview 界面可以返回播放文件，在 menu

中返回上一级。