Upload
others
View
5
Download
1
Embed Size (px)
Citation preview
1 | P a g e
JUPEM T19/2014: USER MANUAL - MYSKIP CADASTRAL SURVEY INFORMATION WEB SERVICES SYSTEM (CSIWSS)
JUPEM T19/2014: CADASTRAL SURVEY
INFORMATION WEB SERVICES SYSTEM
(CSIWSS)
USER MANUAL FOR MPC INTERACTIVE PORTAL
(SmartKADASTER Interactive Portal MySKIP)
- MySKIP -
2 | P a g e
JUPEM T19/2014: USER MANUAL - MYSKIP CADASTRAL SURVEY INFORMATION WEB SERVICES SYSTEM (CSIWSS)
MySKIP – User Manual
SmartKadaster Interactive Portal (MySKIP) is a Web Application designed by the Department of Survey and Mapping
Malaysia (JUPEM) designed to enable the public to mark and describe places on the maps. It is a form of collaborative
mapping where user can generate contents on the web maps. These user-generated contents can then be
implemented back into the geospatial data of JUPEM to further enhance the maps
There are two (2) locations in MySKIP which are Kuala Lumpur and Putrajaya. Basemaps, location search and user
generated places are scoped to each individual location. User will generally switch their MySKIP location via SKIP 2D
map portal. This application can be accessed by government agencies and non-governmental agencies (NGOs) on the
terms set by the department
This user guide is divided into 10 parts which are include Searching Function, Go to Location, Log in Function, to Add
Point, Add Line, Add Polygon, Measure Distance, Measure Aare, Locate Me function and Zoom in function,. All parts
will be described detailed in this guide.
MySKIP – Basic Function
3 | P a g e
JUPEM T19/2014: USER MANUAL - MYSKIP CADASTRAL SURVEY INFORMATION WEB SERVICES SYSTEM (CSIWSS)
Searching Go to
Location
Search by
Category
Log In 1 2 3
Toogle
Basemap
Add Point Add Line
Measure Area Measure
Distance
Locate Me
Zoom
5
7
9
6
10
11
12
4
Add Polygon
8
4 | P a g e
JUPEM T19/2014: USER MANUAL - MYSKIP CADASTRAL SURVEY INFORMATION WEB SERVICES SYSTEM (CSIWSS)
1. Searching
Searching
1. Click “Search” tab
2. Follow the step as shown below:-
a) In the text search, edit the input or type “klcc”. Hit “Enter” button on your (keyboard).
b) This list of searching will be displayed
c) Searching result will be shown and marked on map
5 | P a g e
JUPEM T19/2014: USER MANUAL - MYSKIP CADASTRAL SURVEY INFORMATION WEB SERVICES SYSTEM (CSIWSS)
2. Go to Location
WGS84 (EPSG:4326)
1. Follow the step as shown below:-
(a) Click “Go To” tab button
(b) Click at “WGS 84 (EPSG: 4326)”.
(c) Enter the Latitude and Longitude value in the input box, Example, type Latitude Value
“3.157903” and Longitude Value “101.711597”
(d) Next, HIT “Enter” button on your keyboard or Click at search icon to proceed
2. The screenshot shown the result of the coordinates that have been entered
6 | P a g e
JUPEM T19/2014: USER MANUAL - MYSKIP CADASTRAL SURVEY INFORMATION WEB SERVICES SYSTEM (CSIWSS)
GDM200 Peninsular RSO (EPSG:3375)
1. Follow the step as shown below:-
(a) Click “Go To” tab button
(b) Click at “GDM 2000 Peninsular RSO (EPSG: 3375)”.
(c) Enter the Northing and Easting value in the input box, Example, type Northing Value
“349473.276” and Easting Value “412823.020”
(d) Next, HIT “Enter” button on your keyboard or Click at search icon to proceed
2. The screenshot shown the result of the coordinates that have been entered
7 | P a g e
JUPEM T19/2014: USER MANUAL - MYSKIP CADASTRAL SURVEY INFORMATION WEB SERVICES SYSTEM (CSIWSS)
GDM2000 Cassini KL / Selangor
1. Follow the step as shown below:-
a) Click “Go To” tab button
b) Click at “GDM 2000 Cassini KL/Selangor
c) Enter the Northing and Easting value in the input box, Example, type Northing Value
“349473.276” and Easting Value “412823.020
d) Next, HIT “Enter” button on your keyboard or Click at search icon to proceed
2. The screenshot shown the result of the coordinates that have been entered
8 | P a g e
JUPEM T19/2014: USER MANUAL - MYSKIP CADASTRAL SURVEY INFORMATION WEB SERVICES SYSTEM (CSIWSS)
3. Log In
Log In
1.Follow the step as shown below:-
Note: For these social network account, any user who wishes to make any changes to the map will need
to authenticate themselves. User can choose to register and log in with a social network account.
Currently, MySKIP supports logging in with the following accounts which are Facebook, Google,
Microsoft and Twitter.MySKIP will automatically assign this role to people who logged in using
Facebook, Google, Microsoft or Twitter account
a) Click “Log In” at the top of MySKIP Portal
b) Enter Email and Password that already registered
c) Click “Log in” button to proceed
d) For Normal User that do not have an account, Can proceed with Social Network Account by Click
at any social Network to Continue Log in at MySKIP Page
9 | P a g e
JUPEM T19/2014: USER MANUAL - MYSKIP CADASTRAL SURVEY INFORMATION WEB SERVICES SYSTEM (CSIWSS)
10 | P a g e
JUPEM T19/2014: USER MANUAL - MYSKIP CADASTRAL SURVEY INFORMATION WEB SERVICES SYSTEM (CSIWSS)
4. Add Point
Note
-Using Function to Add Point, Add Polygon and Add an Area, user need to Log In using (social Media
account) or with (registered account) to add new geospatial features (points, lines and polygons)
and describe places on the maps.
- Once the user Add/Edit/Delete the features on the Map, It will sent to the Moderator to get an
approval before it is visible to the Public. The Moderator will verify either to Approve or Reject the
features that created by the user.
Add Point
1. Follow the step as shown below:-
a) Click on “Add Point” tool function
b) Click on any area on the map (the example given in the figure below).
c) Click “Save” button to place a point in the chosen location
2. After a point has been save;
d) Type the title
e) Enter the descriptions
f) Choose and select by scroll down the Categories
g) Click “Save” button to proceed
3. Go to “Edit” tab to edit/ add Tittle & Descriptions, “Outline”, “Photo”, “Documents” and “Delete
Place”
11 | P a g e
JUPEM T19/2014: USER MANUAL - MYSKIP CADASTRAL SURVEY INFORMATION WEB SERVICES SYSTEM (CSIWSS)
12 | P a g e
JUPEM T19/2014: USER MANUAL - MYSKIP CADASTRAL SURVEY INFORMATION WEB SERVICES SYSTEM (CSIWSS)
5. Add Line
Add Line
1.Follow the step as shown below:-
a) Click on “Add Line” tool function
b) Click on any area on the map to draw a line (the example given in the figure below).
c) Click “Save” button to place a point in the chosen location
2.After a point has been save;
d) Type the title
e) Enter the descriptions
f) Choose and select by scroll down the Categories
g) Click “Save” button to proceed
3.Go to “Edit” tab to edit/ add Tittle & Descriptions, “Outline”, “Photo”, “Documents” and “Delete
Place”
13 | P a g e
JUPEM T19/2014: USER MANUAL - MYSKIP CADASTRAL SURVEY INFORMATION WEB SERVICES SYSTEM (CSIWSS)
14 | P a g e
JUPEM T19/2014: USER MANUAL - MYSKIP CADASTRAL SURVEY INFORMATION WEB SERVICES SYSTEM (CSIWSS)
6. Add Polygon
Add Polygon
1.Follow the step as shown below:-
a) Click on “Add Polygon” tool function
b) Click on any area on the map to draw a line (the example given in the figure below).
c) Click “Save” button to place a point in the chosen location
2. After a point has been save;
d) Type the title
e) Enter the descriptions
f) Choose and select by scroll down the Categories
g) Click “Save” button to proceed
4.Go to “Edit” tab to edit/ add Tittle & Descriptions, “Outline”, “Photo”, “Documents” and “Delete
Place”
15 | P a g e
JUPEM T19/2014: USER MANUAL - MYSKIP CADASTRAL SURVEY INFORMATION WEB SERVICES SYSTEM (CSIWSS)
16 | P a g e
JUPEM T19/2014: USER MANUAL - MYSKIP CADASTRAL SURVEY INFORMATION WEB SERVICES SYSTEM (CSIWSS)
7. Measure Distance
Measure Distance
1.Follow the step as shown below:-
a) Click on “Measure Distance” tool function
b) Click on any area on the map to draw a Polygone or to draw a line from Point 1 to Point 2 (the
example given in the figure below which is from Point 1 to Point 2. Double Click to stop the
measurement
c) Result distance from Point 1 and Point 2, Total distance and bearing will shown
17 | P a g e
JUPEM T19/2014: USER MANUAL - MYSKIP CADASTRAL SURVEY INFORMATION WEB SERVICES SYSTEM (CSIWSS)
8. Measure Area
Measure Area
1. Follow the step as shown below:-
a) Click on “Measure Area” tool function
b) Click on any area on the map to draw line of Polygon and drag the line or to draw a line from
one point to another point (example given in the figure below which is from Point 1 to Point
2, Point 2- Point 3 – Point 4 )Double Click to stop the measurement
c) Result distance from Point 1 to Point 2, Point 2 to Point 3, Point 3 to Point 4 . Total distance
and bearing will shown
18 | P a g e
JUPEM T19/2014: USER MANUAL - MYSKIP CADASTRAL SURVEY INFORMATION WEB SERVICES SYSTEM (CSIWSS)
9. Locate Me
Locate Me
1.Follow the step as shown below:-
a) Click on “Locate Me” tool function
b) Hit popup button on your browser to allow share location.
c) Then, your current location will be displayed at the map.
19 | P a g e
JUPEM T19/2014: USER MANUAL - MYSKIP CADASTRAL SURVEY INFORMATION WEB SERVICES SYSTEM (CSIWSS)
10. Zoom 10.01 Zoom to Selection
Zoom to Selection
1.Follow the step as shown below:-
a) Click on “Zoom to selection” tool function
b) Point and drag the box to zoom at the area selected
c) Then, your current location will be displayed.
20 | P a g e
JUPEM T19/2014: USER MANUAL - MYSKIP CADASTRAL SURVEY INFORMATION WEB SERVICES SYSTEM (CSIWSS)
10.02 Zoom In and Out
Zoom in and Out
1.Follow the step as shown below:-
a) Click on “Zoom + or Zoom -” tool function
2.If click Zoom + map will zoom into and If Click Zoom - the map will zoom out. Then, your current
location will be displayed.