Muhammad NaqashElectrical (Electronics) Engineer

Phone: +92–333-8765465 Email: engr.mnaqash@gmail.comAddress: Rahat Distributors Mohallah Abbas Nagar near Qasr-e- abu-turab Narowal, (51600) Punjab, Pakistan.

Objective

To be part of a dynamic and progressive organization that offers challenging working environment where one can utilize energies and competences in a positive direction and contribute towards overall objectives of organization.

Experience

Electrical, Instrument and Control Engineer

Company : Pulsonic Engineering Services Designation : Assistant EngineerDate : September 2014 to May 2015

Projects

Erection & Commissioning of Bio-mass and pulverized coal fired Thermal Power Plant at Ittefaq straw board industry Gujranwala.

35 TPH High Pressure Boiler Erection and Commissioning5 MW Triveni Steam Turbine Erection and Commissioning

Erection & Commissioning of Bio-mass and pulverized coal fired Thermal Power Plant at Jubilee Board and Paper Mill Gujranwala.

35 TPH High Pressure Boiler Erection and Commissioning5 MW Triveni Steam Turbine Erection and Commissioning

Erection & Commissioning of 7.5 Bio-mass and pulverized coal fired Thermal Power Plant at Continental Plastic PVT. LTD sheikhupura.

40 TPH High Pressure Boiler Erection and Commissioning7.5 MW Triveni Steam turbine (Non Extracting) Erection and Commissioning

Responsibilities

Installation and commissioning of the motor starter for the Boiler Feed water pump, rotary, Ash conveyor, RO plant motors, VFD drives for the boiler Fans and feeders.

Installation of the bus bar for the boiler panels (80*10mm). Installation and commissioning of the instruments at the Boiler and making

Different Control loop for automation of the Boiler. Installation of the Programmable Logic Controller & Integrate instruments

With PLC. Calibration of the All Temperature, Flow, level and Pressure Transmitter. Have an experience to work in coordination with Indian Triveni Engineers. HT cables installation for 11kv turbine (630 mm2 cable for each phase). Erection and commissioning of LASCPT, ACB, VCB, MCC,

DCMSP,TCP,MCSP,GRP, Battery Charger, NGR, AVR Panels of Power house.

Laying the control cables as per cable schedule for All Turbine control panels and attach all the safeties of the turbine with the panels.

Loop checking and testing of the all safeties of the turbine. Testing and commissioning of the Alstom Relays for the turbine and

alternator(rotor earth fault relay, differential relay, u/o voltage relay, o/u frequency relay, over current relay, reverse reactive power relay, trip relay and trip supervision relay)

Loop testing and commissioning of various control loops. Trouble shooting during commissioning.

Internship at Pakistan Telecommunication Company Limited

Company : Pakistan Telecommunication Company Limited (PTCL)Duration : Three Months Date : 6th September to 7th December 2013

Technical Skills

Able to read and interpret electrical and instrumentation schematics. Knowledge of instrumentation and controls components such as

temperature sensors and transmitters, pressure sensors, level, flow meters, limit switch, control valves, solenoid valves, regulators and Transducers.

Knowledge of induction motor control & starting methods like direct online Starter, soft starter, star delta starter, auto transformer starting etc.

Analyzing and interpreting data & providing technical support.

Familiar with the Industrial Communication & control Standards. Writing reports and documentation & Collaborating with a team of

engineers.

Programmable logic controller Programming & Human Machine Interface (HMI).

Management Skills

Planning the best use of time, Extract maximum information from fact, fully absorbing mind, Understanding the problems, Risk Analysis.

Certificates & Training

Certificate of basic training course on PLC & SCADA. Certificate of participation at Dice Connect conducted by UET Taxila. Certificate of participation in 7th all Pakistan engineering conference. Certificate of participation attended Workshop on Intelligent Energy

Management.

Computer Literacy

Operating Systems, Microsoft Office, Engineering Software’s (Proteous), C++ Programming, Adobe Photoshop, AVR (ABB Unitrol CMT 1000) Industrial Communication protocols (Foundation field bus, Profibus, Modbus, HART), PLC Programming (Simatic Step 7, Logix pro), HMI (Wincc), IT Skills (Domain Handling, working and installing Website, scripts, blog maintenance etc.).

Education

B.Sc. Electrical Engineering (Electronics) from Federal Urdu University of Arts, Science and Technology, Islamabad (44000), Pakistan (2010-2014)

F.Sc. (pre-Engineering) from Punjab college of Science, Gujranwala (52250), Punjab, Pakistan (2008-2010)

Matriculation (Science) from The Pakistan Foundation High School, Narowal (51600), Punjab, Pakistan (2008-2006)

Personal Details

Date of Birth : 27 April 1992

Nationality : Pakistani PEC #: ELECT/43574

Gender : Male Passport #: AC9318951

Marital Status: Single CNIC #: 34501-0264895-3

Domicile : Narowal, Punjab SKYPE: Muhammadnaqash222