Jl. Dukuh Kupang 19 No.34 Surabaya Tel : 031-5665553,031 ... · in Thailand, establish since 1975. Products we manufacture are as follows : 1. Rubber conveyor belt with maximum width

1/12

We present : THE ADVANTAGE PRODUCT SERIES RUBBER CONVEYOR BELT, ELEVATOR BELT,STEEL CORD

BELT,FLAT TRASNMISSION BELT, AND OTHER BELT & ROLLS

Jl. Dukuh Kupang 19 No.34 Surabaya Tel : 031-5665553,031-5688137 Fax : 031- 5688107 Email : [email protected]

We are Global Jaya Tehnik as an Authorized Distributor of :

UNION BELT INDUSTRIES, Co., Ltd.

The company is one of the leading manufacturers of conveyor belts and flat transmission belts in Thailand, establish since 1975.

Products we manufacture are as follows :

1. Rubber conveyor belt with maximum width 2.4 meters 2. Chevron belt with 6 type of cleat high, 5mm, 10mm, 15mm, 20mm, 25mm and 35mm 3. Elevator belt 4. Steel cord conveyor belt 5. Cross rigid conveyor belt with cleat & sidewall 6. Super Flex Transmission Belt 7. Flat transmission belt with cotton 34oz, 28oz, 24oz and 20oz 8. Short blasting belt 9. Rough Top conveyor belt 10. Tumble Blast Belt, Rubber Skirt 11. Rubber Sheet, Rubber Bearing, Hot Splicing Kit, Rubber Break Block 12. Rice Hulling Roll 13. White Flat conveyor Belt, Flat Cotton Belt 14. V-Shaped Conveyor Belt, V-Ridge Conveyor Belt We manufacture with many kind of rubber grade such as General Grade, Abrasion Resistance Grade, Oil Resistance Grade, Heat Resistance Grade, Flame Resistant Grade, Chemical Resistant Grade, Acid-base Resistant Grade, Food Grade, Etc.as per DIN Standard (Germany) and JIS Standard (Japan).Our product range width until 2000mm, thickness 6~25mm We got ISO Certificate 9001 : 2000 and 14001 : 2004 from TUV Rheinland.

Our Advantage :

1. All the product refer to the JIS – Japan Standard and DIN- German Standard 2. Union Belt is the biggest Belt production in Thailand and establish since 1975 3. Union Belt got ISO Certificate 9001 : 2000 and 14001 : 2004 from TUV Rheinland. 4. Product warranty : 12 months in standard application, in case approved situation. 5. In generally Union Belt quality in internal test are : 3 x times better than China product, 2x

times Korea product and similar quality with Europe and Japan product. 6. Have been using in domestic Customer and Overseas Customer such : Siam Cement Thailand 7. Available to produce the Special Purpose Conveyor Belt upon request as on our range.

2/12




We hereby certify that below customer’s name have been using conveyor belts that manufactured from our factory for many years. Some of customer's name are as follows :

LIST OF UNION BELT PRODUCT DETAIL AS FOLLOW:

Applications and Customers Cement Mill, Power plant, Coalmine, Sugar Mill, Food Factory, Warehouse, Sandstone Pit, and General Conveyor Plant, Rice Mill. The product range :

• Length :depend on customer order • Width max 2000mm • Thickness 6~ 25mm

Thai Domestic Customers 1.Electric Power Staton, Mae Moe Plant, Lumpang Thai 2.Khon Khen Sugar Mill Co., Ltd. 3.Siam Cement Group : Cholpratharn Cement, Thai Cement, Metropolitan Cement, Asia Cement, Phuket Cement, Thai Pride Cement, Mahaphan Fibre Cement, Samakee Cement 4.Phoenix Pulp & Paper Co., Ltd 5.Siam City Cement Public Co., Ltd. 6.Thai Central Chemical Public Company Limited 7.ZABB Steel Group : S.P. Metal Works Co.,Ltd., Thai N.O.K. Co., Ltd., Siam Fitting Co., Ltd. Bispipe Fitting Industries Co.,Ltd.

Thai Overseas Customers 1. Lucky Cement Limited, Pakistan 2. UMS Engineering (S) PTE Ltd, Singapore 3. UMS Corporation SDN BHD., Malaysia 4. Domestik Maju SDN BHD., Malaysia 5. YBB Calcium Carbonate Co., Ltd., Vietnam 6. Myanma Petrochemical Enterprise, Nay Phi Taw, Myanmar 7. Lucky Cement Co.,Ltd.Pakistan 8. Energy Plant Clarion Estate Co.,Ltd.Malaysia

3/12




FLAT CONVEYOR BELT and WHITE FLAT CONVEYOR BELT

Union Belt Industries Co.,Ltd can manufacture belts with special thickness depending on customer 's need and convenience when deliver. The thickness selection varies with type and size of material, belt speed, rubber cover grade, and service condition. The special size and grade conveyor belt can be manufactured as per customer requirement. The longer length belt can also be manufactured, depending on the thickness of the belt and the convenience in delivery. Standard Size of Flat Conveyor Belt Diameter of Belting Conveyor

Applications

Flat conveyor belts are used to carry materials along horizontal routes and some materials at inclined angle up to 30°.

The Thickness of Belt depend on : • Type of Conveying Material • Size of material • Belt Speed • Type of rubber Cover • Service condition

4/12




Weight of Conveyor Belt

STANDARD OF RUBBER COVER GRADE

GENERAL SERVICE COVER GRADE M N P

Min. Tensile Strength (kg/sq cm) 250 200 100

Min. Elongation at Break.(%) 450 400 350 Abrasion resistance Excellent Excellent Good Oil resistance Not recommended Not recommended Not recommended Maximum Temperature (C) Normal Temp Normal Temp Normal Temp Tear resistance Excellent Excellent Good Flexing resistance Very Good Very Good Good Weathering resistance Good Good Fair Chemical resistance Good Good Good Service Condition High Tension Conveyor

Belts Superior in abrasion-resistance and cut-and gouge resistance.Suitable forConveyor large sized lumps,sharp and rugged materials.

High Tension Conveyor Belts

Superior in abrasion-resistance

but inferior to grade M in cut-and-gouge resistance.

General Light Duty Service

Suitable for conveyingmoderately

abrasive materials andsmall sized materials.

5/12




HOT MATERIAL SERVICE COVER GRADE HR 100 HR 150

Min. Tensile Strength (kg/sq cm) 100 100 Min. Elongation at Break.(%) 300 300 Abrasion resistance Excellent Excellent Oil resistance Limited Limited Maximum Temperature (C) Max. Temp of

Belts Surface: 100 DEG. C. Max. Temp. of

Material Handled: 150 DEG. C.

Max. Temp of Belts Surface: 150 DEG. C.

Max. Temp. of Material Handled: 400 DEG. C.

Tear resistance Good Good Flexing resistance Good Good Weathering resistance Good Very Good Chemical resistance Good Excellent Service Condition Superior in heat resistance and

also in cut, abrasion and tear resistance. Suitable for conveying the following materials:

Hot sintered ore, hot pallet, hot clinker, hot chemical,

fertilizer, etc.

Highly excellent in heat resistance and also superior inabrasion resistance and cut and tear resistance.

No cracks will result, So suitable for hot materials. Typical applications :

Hot clinker, hot cement, hot chemical, Hot powder, hot sintered one, etc.

OIL & CHEMICAL SERVICE

COVER GRADE OR1 OR2 Min. Tensile Strength (kg/sq cm) Min 80 Min 80 Min. Elongation at Break.(%) 300 300 Abrasion resistance Good Good Oil resistance Very good for

petroleum oils vegetable & animal oil

Fair to poor for petroleum good for vegetable & animal oils

Maximum Temperature (C) Normal Temp Max. Temp of Material

Handled: 100 DEG. C. Tear resistance Good Good Flexing resistance Good Good Weathering resistance Good Very Good Chemical resistance Good Execellent Service Condition Oil grain or seed service

(soy bean, crushed corn, etc.) Food handling.

Greasy, oil sprayed coal (petroleum oil up to 40%

aromatics, no. 2 heating oil).

Oil & Heat Resistance Having oil resistance, though not great , and suitable for conveying

hot materials. Recommendable for conveying

the material containing some mineral oil.

6/12




V – SHAPED CONVEYOR BELT

Applications For carrying coal and mineral ore, also powdery material such as sand, fine coal

and grain, as well as materials in bags, along angled routes.

Features : • Can carry loose materials at angle of 17o - 28o, and bagged

materials at 30o - 35°. • Cleat angle and pitch are designed for smooth travel over

return idlers. • Cleats and top cover rubber are mono block molded for

strength.

Dimension of V-Shaped Conveyor Belt Type 5 mm. (CV 300 - 1200/5)

Dimension of V-Shaped Conveyor Belt Type 10 mm. (CV 750/10)


7/12




SIDEWALL AND CLEAT

Dimension of V-Shaped Conveyor Belt 25 mm. (CU 750/25)


Dimension of V-Shaped Conveyor Belt Type 35 mm. (CU 450/35)

Applications It is attached to flat conveyor belt for conveying materials along an inclined route at an angle up to 75°.

Features : • Increase up to 4 times conveying rate comparing to common Conveyor belt. • Useless space when installation. • Protect Materials from easy falling Rubber Grade :

• N(NR) : Abrasion Resistant • O(NBR) Fat and Oil resistant, heat resistant up to max 100oC

8/12




SIDEWALL

CLEAT

9/12




CW TYPE

STEEL CORD CONVEYOR BELT

Cover Rubber Grades DIN 22131 Standard

Applications

Ideal for extreme loads, long distance service and large conveying heights such as open-pit and underground mining, cement industry, coal-fired power plant, etc.

Properties : • High Belt strength with very long elongation • Good thronging Characteristics • High impact resistance • Good gouge protection • No localized elongation from discontinues feed of heavy load • Long life expectation

Special Grades : • Heat Resistance at 100oC, 120oC, 150oC • Oil Resistance • Flame resistance and anti static • The steel cord is made of high carbon steel and have

the surface coated by hot-gavanized zinc which facilitates adhestion to the rubber and reduces corrosion.

• The open cord construction enables the core rubber compound to penetrate and fill the steel cord almost completely, thus increasing the steel-to-rubber bond, the corrosion protection and reduction of internal friction

10/12




Standard Specification

V-RIDGE CONVEYOR BELT

ELEVATOR BELT

Applications For carrying light materials which need high friction to prevent from falling.

Applications

Attach buckets for vertical transport of free-flowing, fine and

loose materials with small to medium size lumps. the belt has

high tensile strength.

11/12




ROUGH TOP CONVEYOR BELT

TTUMBLE BLAST BELT

V-Shaped Tumble Blast Belt

Stripe Tumble Blast Belt

Applications • For conveying light weight materials and packages at an inclined angle.

• For conveying fragile materials such as glass bottle and rolling materials.

• For conveying work in rubber gloves industry, etc.

Features • Belt is made endless without splicing joint so it is more durable and longer life service.

• Belt can be custom-made to fit every tumble shot blast machine.

• A variety of hot vulcanized tumbling cleats and tracking guides are available.

12/12




SUPER FLEX TRANSMISSION BELT

FLAT CUTTON BELT

FLAT TRANSMISSION BELT

RICE HULLING ROLL

Applications Used in high tension work or attach BUCKET for vertical transport.

Applications

Cotton belt with one-sided skim coat, for material transports which need clean surface or rapid heat transfer.

Applications Used for power transmission and in rice mill industry,etc.

Applications Used in rice mill industry.

Properties of Rice Hulling Roll

Remark :

• Grey is suitable for general use • Red is suitable for general rice which has thick skin • Yellow is suitable for Jasmine rice

Documents

Jl. Dukuh Kupang 19 No.34 Surabaya Tel : 031-5665553,031 ... · in Thailand, establish since 1975. Products we manufacture are as follows : 1. Rubber conveyor belt with maximum width