JOB HAZARD ANALYSISHOW TO USE THIS FORM : Installation/Facility PLATFORM1) Crew performing task reviews ALL generic JHA considerations. Location WP-IA2) Review previous JHA update(s) for useful information which will help this task. Associated Work Permit Type LIFTING3) Create new JHA update with generic form and ALL considerations for this task. Associated Work Permit Number4) Carry out task as per plan. If any conditions change ---STOP & RE-ASSESS. Electrical Isolation Certificate Number 5) File JHA update for future reference. Physical Isolation Certificate Number WORK ACTIVITY RIG UP WIRELINE EQUIPMENT JHA Cross-Reference Number

JobStep

Description ofJob Step

PotentialHazard/s L S R Control / Recovery

Measures L S R Result

1 Preparation for PTW § To avoid clash of work at platform 2 3 6

§ Applicant, Authorizing, Approval Sig-natories be familiar with the job.

§ Competent Personnel to conduct the operation.

§ Inform to all crew on location and de-scription of works.

1 1 1 Acceptable

2 Pre Job Meeting. § Other party not aware where you are working 2 2 4

§ Inform to all crew on location§ Inform the hazards involved at place

of work1 1 1 Acceptable

3 Lifting wireline equipment

§ Hand and foot crush during lifting the equipment due to sling break.

§ Body caught between load§ Finger pinched while repositioning

the equipment§ Equipment dropped due to lifting

equipment failure.

2 2 4

§ Physical inspection of lifting equip-ment.

§ Valid inspection records§ Stay away from the weight§ Don’t stand between load§ Assign experience signal man§ Beware of hand and foot position§ Use tag line while handling lifting

equipment.§ Clear communication between Signal

man and Crane Operator.

1 1 1 Acceptable

JOB HAZARD ANALYSIS

4Rig up wireline equipment on the main deck.

§ End of wire stabbed personnel if wire parted.

§ Bodily injury and equipment dropped due to lifting equipment failure.

§ Tripping hazard.§ Hydraulic oil hose burst cause hy-

draulic splash to personnel and con-taminate environment.

§ Back injury due to wrong method of manual handling.

§ Finger, hand and foot crush during handling equipment.

2 2 4

§ Physical inspection for lifting equip-ment.

§ Make sure lifting equipment valid the inspection record.

§ Double check the connection and hose

§ Cut and test the wire prior to do job.§ Proper house keeping and make

sure no oil spill.§ Use proper lifting gears and lifting

technique.§ Get help from other personnel.§ All under pressure hoses connection

secure with safety pin.§ Follow the working safety procedure.

1 1 1 Acceptable

5 Sign off permit § other party not aware of job status. 2 3 6§ Secure all equipment§ Mention on the permit status of job. 1 1 1 Acceptable

JOB HAZARD ANALYSIS

L - LIKELIHOOD S - SEVERITY R - RATING RESULT

CATEGORY DEFINITION CATEGORY DEFINITIONS H 3 6 9 6 - 9 UNACCEPTABLE

LOW 1 Remote LOW 1 No Injury No Damage No Pollution M 2 4 6 3 - 4 TOLERABLEMEDIU

M 2 Possible MEDIUM 2 First Aid Injury Minor Damage Minor Pollution L 1 2 3 1 - 2 ACCEPTABLE

HIGH 3 Probable HIGH 3 Lost Time Injury Major Damage Major Pollution L M H

IS THERE A SAFER WAY TO COMPLETE THE JOB ? ARE THERE ALTERNATIVES WITH LESS RISK ? LIKELIHOOD

JHA Number TASK SAFETY MANAGEMENT OUTLINE Date this JHA created :Date JHA Last Revised :

WORK ACTIVITY EQUIPMENT Type of Equipment Manufacturer Tag. No. Precise Work SiteWIRELINE EQUIPMENT MAIN DECK AREA

WORK ACTIVITY PARTICIPANTS THIS JHA CREATED BYName Discipline Position Performed

Job Before?Name Discipline Position

WIRELINE W/L OPRT WIRELINE W/L OPRTWIRELINEWIRELINE

WORK ACTIVITY RESPONSIBILITY JHA SUBMITTED BY JHA ACCEPTED BYWORK LEADER RECEIVING AUTHORITY APPROVING AUTHORITY

Name : Name: Name : Signature : Signature : Signature :Date : Date : Date :Time : Time : Time :