Upload
femi-adeniyi
View
86
Download
3
Embed Size (px)
Citation preview
Worldwide training programmesPipeline, riser and subsea engineering
www.jee.co.uk
2
About Jee Welcome to our learning and development training guide
Jee, established in 1988, is an independent firm of engineers. We deliver high-calibre pipeline, riser and subsea engineering and training services to the oil and gas industry from our offices in London, Aberdeen and Abu Dhabi.
Our training portfolio is built on the back of our engineering services, where our expertise lies in whole-life solutions for subsea pipelines and risers. We also provide cable engineering services for offshore wind farm projects.
Our courses are taught by our own chartered engineers and technical experts in locations worldwide through public and in-company programmes. Selected courses are also available to complete online.
We invest heavily in our tutors and their training to ensure the benefits of their knowledge and expertise are passed on to you. The quality of our work is accredited to ISO 9001.
We spend 80% of our time working on engineering projects and 20% of our time teaching it, which means delegates benefit by learning directly from the experts.
This brochure showcases our training capabilities, outlining our standard courses as well as detailing how we can tailor training to meet specific needs. You will find information on everything from course delivery to tutor profiles and academic qualifications.
To find out more about our other capabilities, please refer to the following brochures:
Projects
Integrity management
Decommissioning
Renewables
Our clients include:
3
How we do it
Our courses are written by engineers, for engineers – we understand what you need to know to do your job
Our courses are written, delivered and managed via our ISO 9001 quality assurance system, guaranteeing high-calibre courses every time
Our course notes are professionally produced in full colour with annotated tutor notes to serve engineers throughout their career
We take on board feedback and continually invest in our courses, ensuring up-to-date course content
Our courses maximise learning and retention through the use of case studies, exercises, samples and videos
Site visits enable delegates to experience the subsea industry first-hand
Our standard courses are built around training paths to build on existing engineering competencies
About our courses
Foundation
Technical awareness & understanding
Construction & installation
Practitioner
Other courses available:
•Introductiontotheoilandgasindustry•Polymersandcomposites•Flowassurance•Oilimport,stabilisationandexport•Rigidriserdesign
Subsea pipelines Construction of subsea pipelines
MTech 100 Credits*
MSc 60 Credits*
Subsea systems
Risers, umbilicals and flexibles
Reeling
Installation calculations for
subsea pipelines
Onshore pipelines Design of subsea pipelines – Part 1
Landfalls and marine terminals
Integrity management of
subsea pipelines – Part 1
Integrity management of
subsea pipelines – Part 2
Design of subsea pipelines – Part 2
Pipeline design
Pipeline operation
Academic qualifications
World-classengineer
Breadth and depth of knowledge*See page 22 for details.
Depth of knowledge and skill
4
Online distance learning
We offer two methods of learning, face-to-face and online distance learning.
Online distance learning courses have all the benefits of a classroom course but give delegates the flexibility to study when and where they want. Choose a specific start date to fit around projects or personal life, or gain instant access if required. We monitor progress and send update reports to help engineers and managers to keep on track. Plus, our expert tutors are on-hand to provide support, answer questions and give guidance on technical queries.
How it works
Each course takes 12 weeks to complete and delegates should allow for 30-40 hours of learning time. Delegates complete the course at their own pace with support from our tutors via the online tutorial forums. Delegates receive 12 weeks of unlimited access to specialists in the field of subsea engineering.
Our online learning system is easy to use and interactive, providing an effective learning platform.
Key features include:
Easy navigation to track progress
Optional voice commentary to teach complex topics
An interactive glossary of terms to facilitate access to key information
Interactive diagrams to clearly illustrate key learning points
Playback to allow the re-play of slides, movie clips or whole modules
Online discussion forums to share experiences with fellow delegates from around the world
The ability to ask questions or check progress via the online tutorial forum
Detailed notes give supplementary information if required
Please visit www.jee.co.uk to view a demonstration of our online distance learning courses.
Tailored courses
If online distance learning is your company’s preferred course delivery method, modules can be selected from our standard online courses to create a tailored online programme. Call us on +44 (0) 1732 371 369 to discuss your requirements.
I appreciate the tutor support I have received; the explanation to my questions has helped me tremendously. Fernando Molina, Project Controls Engineer, Global Industries, Online distance learning delegate
5
If you have a team of people to train, an in-company course is ideal. We will run the course of your choice at a date and location to suit you. You can choose from our standard courses or create your own bespoke course, tailored to your team or company’s learning requirements. We deliver courses worldwide.
Customised courses
Choose a standard course from our existing programme and we can adapt it in length, content and emphasis to suit your particular requirements. As our courses are modular, you can pick and choose from over 150 topics to design your own training programme.
New courses
Can’t see what you want? We can write a course for you. We have extensive experience in developing new courses for clients and we will work with you to assess your training needs and develop a programme to meet them.
Benefits of in-company courses:
Schedule training around projects, recruitment schedules or following appraisals
Achieve cost-savings through group rates
Minimise delegate travelling time and expenses
Improve team morale and bonding
Complement current internal training
Assistance from our Courses Co-ordinator will take the hassle out of organising a course
In-company courses
Design your own course:
Incorporate your company projects and case studies
1 day workshop to 10 day in-depth technical course
Induction and conversion training
Sessions delivered by your internal experts
Your Course
Site visits Group discussions
Online and face-to-face
learningSkills mapping
We are delighted with the quality of training provided by Jee who were more than happy to tailor the course to fit in with our trainee education programme.Coen Spanjers, Deputy Engineering Manager, Heerema Marine Contractors
6
Our public courses are held regularly in locations worldwide with courses currently scheduled in Aberdeen, Houston, Abu Dhabi, Kuala Lumpur and Perth.
Public courses are a great opportunity to dedicate time away from the office to develop knowledge and network with peers in the industry.
We schedule regular dates throughout the year so that training needs can be met as they arise, such as an intake of new engineers or at the start of a new project. Visit www.jee.co.uk for our up-to-date course schedule.
Training paths
Delegates can follow training paths to specialise in different pipeline areas or complete all Jee’s courses to become a pipeline expert!
Discounts
We offer multi-booking discounts to help training budgets go further. These are updated throughout the year so please visit www.jee.co.uk for further details.
Can’t see what you want?
If you and colleagues want us to run a public course in your region, email [email protected] with your suggestions.
Public courses
Downtown Houston
Petronas Towers, Kuala Lumpur Bell Tower, Perth
Sheikh Zayed Al Nahyan Mosque, Abu Dhabi
Lighthouse, Aberdeen
Invest in your careerAttend Jee courses to gain credits towards an MTech or MScGo to page 22 for details
7
A great balance and broad range of topics to give any new comer an excellent overview of the subsea pipeline and wider subsea industry.Daniel Kefford, Subsea Pipeline Engineer, Chevron Energy Technology Company
Subsea pipelines This course gives a comprehensive and complete understanding of subsea pipelines, from design and construction through to operation.
Gain an appreciation of pipeline design considerations, pipe manufacturing methods and materials selection as well as a knowledge of flow assurance, installation methods and pipeline integrity management systems.
Who this course is for
Technical personnel in the subsea oil and gas industry, including:
Graduate engineers
Conversion engineers from other industries
Pipeline engineers moving from onshore to offshore projects
Subsea engineers looking to expand their pipeline knowledge
Technical specialists from manufacturer and supplier companies
Managers and team leaders taking on new subsea teams
Engineers and managers from construction contractors
Technical personnel from government and regulatory bodies
Course information
Level: Foundation
Duration: 4 days
CPD points: 28
Course content Field layoutsConfigurations and equipment, Water and gas injection, Manifolds and flexible risers, Pigging loops and umbilicals
Route selectionSurvey techniques, Soil types and properties, Routing of pipelines
Pipe manufactureRigid steel pipe, Flexible pipe
Pipe sizingPipeline diameter, Wall thickness determination, Buckles and axial expansion
MaterialsStrength selection, Corrosion resistance, Clad and lined pipe
External coatingsCorrosion control, On-bottom stability, Thermal insulation, Pipe-in-pipe
Design methodsRisk and limit states, Selection of safety factors, DNV OS-F101, HP/HT and HIPPS, Fishing interaction, Dropped objects
Common workConstruction surveys, Pipelay initiation, Seabed preparation, Welding – stick, TIG, MIG, STT, SAW, Flaw detection (NDT)
Installation methods S-lay, J-lay, Reel-lay, Bundles and towed methods, Flexibles and umbilicals
Construction supportLandfalls, Trenching and burial, Rock dump, Mattress installation, Pre-commissioning
Tie-ins, spools and risersFlanges and hubs, Diver and diverless connection methods, Rigid riser installation and equipment – slung from jacket, J-tubes, SCR, TTR and hybrid, Flexible riser installation – flexible manufacture, static analysis, lazy and steep wave, S and compliant configuration
Introduction to integrityPipeline integrity management systems (PIMS), Responsibilities and safety, Changes in operational conditions
Flow assuranceRoutine operations, Operational controls, Hydrates and wax, Corrosion and erosion, Turn down, Pigging and additives
Pipeline inspectionPhilosophy, Risk-based approach, Inspection plan, Scheduling, Internal inspection methods, External inspection equipment, Exposure and spans, Wall defect assessment, Remedial works (clamps, mattresses, stabilisation)
Repairs, tie-ins and decommissioningIsolation methods, Hot taps and tie-ins, Mechanical connectors, Hyperbaric welding, Damage repairs, Decommissioning
8
This course presents an understanding of subsea systems from design and installation through to operation.
Learn how the whole system works and gain an awareness of the equipment used. Delegates will also get to grips with industry terminology and learn about market drivers and issues affecting subsea production.
Who this course is for
Technical personnel in the subsea oil and gas industry, including:
Graduate engineers
Conversion engineers from other industries
Pipeline engineers moving from onshore to offshore projects
Subsea engineers looking to expand their pipeline knowledge
Technical specialists from manufacturer and supplier companies
Managers and team leaders taking on new subsea teams
Engineers and managers from construction contractors
Technical personnel from government and regulatory bodies
This is an excellent course for professionals working in subsea that may be limited to one area – highly recommended. Miguel Hernandez, Field Development and Technical Sales, FMC Technologies Inc
Subsea systemsCourse information
Level: Foundation
Duration: 4 days
CPD points: 28
Course content History of subsea productionOnshore developments, Offshore developments, Subsea developments, Deepwater drivers and technologies, The future for subsea
Drilling and completing a subsea wellDrilling equipment, Drilling processes, Well logging and testing, Completion types, Completion processes
Subsea configurationsTemplates, Clusters, Daisy chains, Hybrids, Satellites
SpoolpiecesDesign of spoolpieces and flexible jumpers, Installation of spoolpieces and flexible jumpers, Connecting spoolpieces and flexible jumpers
Subsea production control equipmentChristmas trees, Control systems, Umbilicals, Manifolds, System vulnerabilities
Subsea processingWhy use subsea processing?, Subsea multiphase meters, Subsea separators, Subsea pumps, Subsea compressors, Subsea water reinjection, Subsea HIPPS, Current developments
Structural design of subsea equipmentTemplate types, Template design, Seabed interface, Fabrication and testing, Protection structures, Corrosion protection
Installation and commissioning of subsea equipmentInstallation issues, Installation methods, Seabed preparation, Commissioning, New technology for installation
InterventionDiving, ROV types and tools, ROV operations, ROV deployment, ROV manufacture, AUV capabilities
WorkoverWorkover vessels, Wireline workover equipment and operations, Coiled tubing workover equipment and operations
Abandonment of subsea developmentsInternational and national regulations, History of subsea decommissioning, Well abandonment process, Subsea structure removal
9
I learned a great deal and I believe I am now much better prepared, as a new hire, to be beneficial to my team.Gregory Martin, Subsea Engineer, BP America
Risers, umbilicals and flexibles
This course will develop knowledge of risers, umbilicals and flexibles and provide a comprehensive and complete understanding of their operation in the subsea environment.
Learn about different types of risers, umbilicals and flexibles, their uses and design, installation and operational considerations. Delegates also find out about FPSOs and how they impact on design and layout of risers and umbilicals.
Who this course is for
Technical personnel in the subsea oil and gas industry, including:
Graduate engineers
Conversion engineers from other industries
Pipeline engineers moving from onshore to offshore projects
Subsea engineers looking to expand their pipeline knowledge
Technical specialists from manufacturer and supplier companies
Managers and team leaders taking on new subsea teams
Engineers and managers from construction contractors
Technical personnel from government and regulatory bodies
Course content Riser types and usesDrilling risers, Production vessel selection, Production risers, Export risers, Completion and workover risers Rigid riser designDesign approaches, Riser sizing design, Design for fatigue Steel catenary risersDesign of SCRs - SCR stresses, SCR design process, Touchdown interaction, Walking and Top termination design, Manufacture and fabrication, Installation Fixed rigid risersTypes of rigid riser, Design of rigid risers, Installation of rigid risers
Top-tensioned risersComponents of TTRs, Design and analysis of TTRs, Installation of production TTRs, Installation of temporary TTRs Hybrid risersTypes of hybrid riser, Generic design, Fabrication and installation FlexiblesRiser configurations, Design of flexible flowlines, Design of flexible risers, Flexible riser components, Manufacture and testing of flexibles UmbilicalsCross-section design, System design, Fittings, Manufacture
Flexible and umbilical installationStorage and loadout, Flexible and umbilical installation, Riser installation, Pre-commissioning
Introduction to FPSOs Characteristics, Uses and advantages, Arrangements of turrets and mooring systems
FPSO vessel motions Motion components, Types of motion response, Wave frequency motion, Response amplitude operators (RAOs), Drift and higher order motions
FPSO interfacesFPSO and choice of riser system, Effect of motion on the riser system, Mooring system effects, Riser-mooring interaction, Clashing and interference, Offloading systems
Bonded hosesTypes of bonded hose, Offloading hose configurations, Manufacture of bonded hoses, Handling and storage of hoses, Installation of hoses, Operation and maintenance of hoses Introduction to riser integrity managementMonitoring, Inspection, Damage assessment, Repair
Course information
Level: Foundation
Duration: 4 days
CPD points: 28
10
This course gives a comprehensive and complete understanding of onshore pipelines, from design, planning and installation through to operation.
Gain an appreciation of pipe manufacturing methods and materials selection, plus the challenges of installing pipelines in difficult terrains. Delegates will also expand their knowledge of corrosion, fitness for purpose, integrity management systems and defect assessment and repair methods.
Who this course is for
Technical personnel in the pipeline industry including:
Graduate engineers
Conversion engineers from other industries
Pipeline engineers moving from offshore to onshore projects
Engineers looking to expand their pipeline knowledge
Technical specialists from manufacturer and supplier companies
Managers and team leaders taking on new pipeline teams
Engineers and managers from construction contractors
Technical personnel from government and regulatory bodies
An excellent foundation course for those wishing to gain a broad knowledge of onshore pipelines.Claudio De Natale, Mechanical and Piping Engineer, Amec UK
Onshore pipelinesCourse information
Level: Foundation
Duration: 3 days
CPD points: 21
Course content Pipeline routing and planningRoute selection, Environmental impact assessments (EIA), Geological hazards, Crossing design, Planning
Pipe manufacture and componentsManufacturing options, Seamless, High frequency induction welded (HFI), UOE and submerged arc welded (SAW), Other methods, Bends and tees, Valves and actuators, Instrumentation, Pumps and compressors
Pipeline hydraulic designGas pipelines, Liquid pipelines, Multi-phase pipelines
Pipeline wall thickness designDesign methods, Design for bursting, Design for impact protection, Risk management
Pipeline corrosion design Corrosion mechanisms, External coatings, Cathodic protection, Internal coatings
Pipeline constructionSite preparation and stringing, Welding and non-destructive testing (NDT), Excavation, lowering and reinstatement, Pre-commissioning, Costs
Pipeline crossings Rivers and watercourses, Roads and railways, Bored construction methods, Uncased construction methods
Construction in difficult terrains Mountainous regions, Swamps and marshes, Arctic, Deserts, Forests
PIMS and routine operationsPrinciple of Pipeline Integrity, Management Systems (PIMS), Code requirements, Routine operations
Inspection Leak detection, External inspection, Internal inspection
Defect assessment and repair Corrosion defect assessment, Dent assessment, Repair techniques, Section replacement methods
11
This course gives a clear and comprehensive understanding of landfalls and marine terminals and how offshore pipeline systems are connected to shore.
This specialist area of pipeline engineering is not fully understood by many engineers, yet it is critical knowledge for anyone working on onshore and offshore pipeline projects.
Who this course is for
Technical personnel working in the onshore and offshore pipeline industry including:
Graduate engineers
Pipeline design and maintenance engineers
Project engineers and managers
Subsea pipeline engineers working on onshore or offshore projects
Conversion engineers moving into the oil and gas industry
Manufacturers, suppliers and construction contractors
The course is delivered by an experienced subject matter expert and covers a niche area, which is difficult to access through other training providers. Rabinder Manku, Civil Marine Engineer, BP Exploration
Landfalls and marine terminals
Course content Introduction to marine terminalsBasic overview of items and interactions, Examples of different types of terminals/landfalls, Brief introduction to each component
Site selection for marine terminalsGeographical considerations, Environmental considerations, Other site selection considerations, Site civil works
Marine terminal design and operationSlug catchers, Separators, Compressors, Pumps, Power generation, Terminal layout, Terminal operation
Landfalls and outfallsTypes of landfall, Directional drilling, Pull from shore, Pull from barge, Trenching, Tie-ins, Outfalls
Jetties, trestles and offloading systemsTypes of trestles and jetties, Breakwaters and other civil marine structures, Design of jetty structures, Design of pipework and accessways, Design of loading/offloading arms
Single point mooringsTypes of SPM, SPM design considerations, SPM connections
Storage tanksTypes of hydrocarbon storage tank, Design considerations, Loss of containment protection, Fire protection, Security
Tanker operationsBerthing at an SPM, Berthing at a jetty, Transfer of hydrocarbons, Transfer of other items, Safety systems
Course information
Level: Foundation
Duration: 3 days
CPD points: 21
12
This course provides a technical introduction to subsea pipeline design, including the engineering principles and codes required.
Learn about subsea pipeline design and understand why subsea pipelines are made the way they are. Delegates will reinforce their learning by carrying out design calculations using codes and will discuss industry developments and new technologies.
This course will help engineers to understand contractors’ output, design houses to apply calculations to projects and regulation bodies to follow up-to-date industry codes.
Who this course is for
Engineers and managers who work on pipeline design projects or require a knowledge of calculations and codes, including:
Pipeline and subsea engineers and managers
Engineering managers, leaders and supervisors
Project engineers and managers
Planning engineers
Flow assurance engineers
Facilities engineers
Technical personnel from government and regulatory bodies
It provides a very good grounding for pipeline design. I am already looking forward to attending Part 2.Benoit Balague, Pipeline & Riser Engineer, Total Exploration Production
Design of subsea pipelines – Part 1
Course content Pipeline routingRules of routing, Route survey, Alignment sheets, Route planning exercise
Diameter sizingSizing for flow, Flow regimes, Flow fundamentals, Single phase flow, Diameter sizing exercise
Thermal design and insulationThermal profile analysis, Cooldown during shut-in, Insulation issues, Insulation systems, Application of insulation, Operational problems in deep water, Case studies, Insulation thickness exercise
Materials specificationLinepipe codes, Material properties, Specification for different services,
CorrosionPrinciples of internal and external corrosion, Anti-corrosion coatings,Chemical methods, Cathodic protection, Anode design
Design for strengthDesign principles, Bursting, Collapse, Buckling and combined stresses, Strain-based design, Wall thickness exercise
End expansion and spool piecesThermal expansion, Forces, strain and stress, Geotechnical considerations,Accommodation of expansion, Spool bend and lift, End expansion exercise
On-bottom stabilityReview of fundamentals, Oceanography and geotechnical design, Hydrodynamicloads, Soil resistance, Stability analysis methods, Computational fluid dynamics, Stability prediction exercise
Bottom roughness and interventionSeabed profile, Bottom roughness analysis, Design for spanning, Intervention methods
Exercises and worked examples on: Route planning, Diameter sizing, Insulation thickness, Wall thickness, End expansion, Stability prediction
Course information
Level: Practitioner
Duration: 4 days
CPD points: 28
13
This course imparts technical knowledge of the more complex design issues affecting subsea pipelines, such as deepwater, high pressure, high temperature and highly corrosive fluids.
Understand how to apply design codes correctly, carrying out calculations and worked examples for use in future projects and learn about solutions to pipeline failures from real-life case studies.
Who this course is for
Engineers and managers who work on pipeline design projects, including:
Pipeline and subsea engineers and managers
Engineering managers, leaders and supervisors
Project engineers and managers
Planning engineers
Flow assurance engineers
Facilities engineers
Technical personnel from government and regulatory bodies
Excellent course. A must for all upstream engineers.Stuart Blumfield, Engineer, JP Kenny Caledonia
Design of subsea pipelines – Part 2
Course content HIPPSPurpose and layout of HIPPS systems, Design calculations, Reliability and availability, Case studies Hydrostatic collapseExternal pressure, Collapse criteriaBuckle propagation, Buckle arrestors, Worked example and exercise Further corrosionAdvanced corrosion mechanisms, Corrosion control, Corrosion rates, Case studies, Corrosion rate exercise Lateral bucklingVirtual anchor spacing, Design process, Out-of-straightness surveys, Buckle mitigation, Lateral buckling exercise
Upheaval bucklingUpheaval buckling mechanism, Upheaval buckling analysis, Worked example Strain-based designApplications in reeling and buckling, Loading, Low strain requirements, Moderate strain requirements and ECA, High strain requirements, Worked example and exercise
FatiguePrinciples of fatigue, Fatigue loadings, Design for fatigue, Worked example, Case studies, Fatigue exercise
Expansion, walking and anchoringEnd expansion, Pipeline walking, Walking modes, Pressure effects, Walking and lateral buckling, Anchoring, Other mitigation methods, Case study and exercise
ProtectionHazards, Pipeline loads and capacity, Risk and safety analysis, Pipeline coatings, Rock dump, Trenching for impact protection, Protection structures, ‘Soft’ protection options
Exercises and worked examples on:Hydrostatic collapse, Lateral buckling, Strain-based design (ECA), Fatigue, Corrosion control, Pipeline walking
Course information
Level: Practitioner
Duration: 4 days
CPD points: 28
14
This course delivers a complete understanding of the processes, equipment and vessels involved in offshore pipe-lay and different methods used.
Gain an appreciation of the size and nature of offshore pipe-lay vessels and equipment and gain confidence in identifying the best choice for pipe-lay and be able to talk technically about pipeline construction. Areas covered include trenching, hydrotesting, surveys and tie-ins.
Who this course is for
Engineers and managers from operating companies, construction contractors, design houses and consultancies who are involved in pipeline construction and installation projects, including:
Construction engineers and managers
Installation engineers and managers
Pipeline engineers and managers
Project engineers and managers
Planning engineers
Offshore structural engineers
Facilities engineers
Technical specialists
Graduate engineers looking to expand their knowledge
For an engineer in the oil and gas industry this course represents what a swiss knife represents for a boy scout, clear and complete fundamentals on the matter. Enrico Ruaro, Subsea Mechanical Engineer, Saipem SpA
Construction of subsea pipelines
Course content S-layS-lay process, Vessels and market, Insulated pipe, Lay curve control
Pipe supply, welding, NDT and ECALine pipe supply and specifications, Welding procedures, Sample testing, Welding methods, Non-destructive testing, Engineering critical assessment, ECA case-study
J-layJ-lay process, Example J-lay projects, Vessels and market, Rapid pipe welding, Connectors, J-lay from drilling rig
Bundles and towed installationDesign of bundles, Fabrication, Towheads, Insulation and heating, Re-usable bundles, Deep water, Advantages of bundles
FlexiblesInstalling unbonded flexibles, J-tube installation, Risers, Umbilicals, Bonded hose
Reel-layReel-lay process, Vessels and market, Special considerations, Ovalisation and cumulative strain, Lay method comparison exercise and discussion
LandfallsPull ashore, Pull offshore, Directional drilling
Tie-insFlanged connection by divers, Hyperbaric welding, Flanged diverless tie-ins, Connector diverless tie-ins
Pre-commissioningGauging and flooding, Hydrotest, Finding leaks, Dewatering, air and vacuum drying
Management systemsLaw, Quality assurance, Health, safety, and environment, Commercial risk management
Health, safety and environmentHealth issues, Safety issues, Environmental issues
SurveyGeophysical survey equipment and methods, Geotechnical equipment and methods, Visual surveys, ROVs and AUVs, Survey operations, Post survey data analysis
Seabed modificationSandwave sweeping, Rock outcrop removal, Rock dump, Concrete mattresses, Protection covers, Pipeline crossings
Post-lay trenching and burialPloughs, jetters, cutters and dredgers, Cable trenching, Trench transitions, Backfill options
Diving and ROVDiving physiology, Diving operations, Diving market, ROV types and uses, Tooling, ROV market
Decommissioning and abandonmentLegislation, Infrastructure removal, Decommissioning/ abandonment in-situ, Pipeline recovery, Re-use, Different interpretation of legislation in USA and Europe, Environmental and financial costs
Course information
Level: Practitioner
Duration: 4 days
CPD points: 28
15
This is a highly technical course providing detailed knowledge of the subsea pipeline installation calculations required for all stages of a pipeline’s lifecycle from pipe-lay to abandonment and recovery.
Practice installation calculations using worked examples to understand industry standards and codes and how they are applied. Gain the confidence to check and question calculations used in subsea projects.
Who this course is for
Engineers and managers from operating companies, construction contractors, design houses and consultancies who are involved in pipeline construction and installation projects, including:
Installation engineers and managers
Construction engineers and managers
Structural engineers
Subsea pipeline engineers and managers
Design engineers
Project engineers and managers
Planning engineers
Facilities engineers
Technical specialists
Good and necessary information for every offshore installation engineer.Ali Bagherynejad, Subsea Pipeline Engineer, Subsea Pipeline Engineering and Construction
Installation calculations for subsea pipelines
Course content CatenariesCatenary curves, Pipe-lay catenary equations, Pipe stresses, Control bytension, J-lay pipe stress exercise
BendingBending during S-lay, Break-over lengths, Concrete-coated pipe, Horizontal lay curve radii, Stinger pipe stress exercise
ReelingReeling criteria - back tension; low cycle fatigue; strength and ovality,Ovalisation exercise
Sagbend bucklingLocal buckling criteria, Prediction of buckling in catenary, Bucklepropagation, Buckle arrestors and detectors, Plastic moment and axial force, Buckle prevention exercise
Ropes, winches and chainsPulley usage, Wire rope construction, Fatigue life, Linear and drum winches,Chains and fittings, Winch capacity exercise
Pipe pull forcesLinear winch set-up - diablo roller forces, Alternative pull setups, Offshore pulls, Landfall pull load exercise
SteelworkDesign process, Visualisation, Analysis, Steelwork design codes, Combinedload checks, Fatigue, Connections, Frame analysis exercise, Strut designcode exercise
PipeliftingAttachments, 2, 3 and 4 point lifts, Strop sizing, Spreader beams, Deepwater resonance, Strop sizing exercise, Spool lift exercise
Lugs and seafasteningsLug and padeye design, Foundations and fixing to deck, Sea fastenings, Lugstress exercise
Barge stabilityStable floating bodies, Determining vessel stability, Free liquid surfaces and suspended loads, Modular craft and local barge adaptation, Crane loadstability exercise
Anchors and pilesAnchor types and handling, Driven, suction and gravity piles, Sheet pileanchorage, Soils properties, Anchor capacity exercise, Sheet pile exercise
Abandonment and recoveryA&R overview, Case study for reel-lay barge, A&R analysis, Laydown exercise
Exercises and worked examples on:J-lay pipe stress, Stinger pipe stress, Ovalisation, Buckle prevention, Winch capacity, Landfall pull load, Strut design code, Strop sizing, Spool lift, Lug stress, Crane load stability, Anchor capacity, Sheet pile, Laydown
Course information
Level: Practitioner
Duration: 4 days
CPD points: 28
16
This course gives an in-depth understanding of the engineering principles behind successful integrity management of subsea pipelines.
Learn about the activities required to operate subsea pipelines in optimum condition, including how to identify issues and assess a range of integrity threats using screening tools and detailed calculations. Case studies and worked examples help to reinforce understanding in key topic areas.
Who this course is for
Engineers and managers who work on integrity management projects, are responsible for maintaining and operating subsea pipelines or those who require specific knowledge in this field, including:
Pipeline engineers and managers
Integrity engineers
Certification engineers
Quality assurance engineers
Flow assurance engineers
Facilities engineers
Project engineers and managers
Operations engineers and managers
As expected Jee delivered an international standard on pipeline integrity management. I wouldn’t have chosen any other way to enhance my competence.Iheanyichukwu Emeruwa, Facilities Engineer, SPDC
Integrity management of subsea pipelines – Part 1
Course content Pipeline Integrity Management SystemIntroduction, What does a PIMS involve? StabilityPipeline instability, Stabilisation options, Case studies
Thermal bucklingWhat is a thermal buckle?, Why are they a problem?, Assessment, mitigation and remediation SpansSpan detection, Assessment of spans, Stress and buckle checks, Vortex-induced vibrations, Remedial measures
PiggingTypes of pigs, Piggability of pipeline, Pig suitability, Launching and receiving
Flow assuranceIntroduction to flow assurance, Causes of flow restriction, Flow control methods
Corrosion overviewIntroduction, Types of corrosion, Corrosion rate modelling, Corrosion monitoring, Control measures, Case studies Internal inspectionIntroduction, Gauge pig, Calliper pig, Magnetic flux pig, Ultrasonic pig, Inspection of flexibles, Other pigs, Launching and receiving, Case study
External inspectionIntroduction, What to look for, Inspection methods, Riser and flexible inspection, Pig trap inspection, Risk-based inspection
Corrosion defectsDefect types and loadings, Corrosion defect assessment levels, Corrosion defect assessment codes, Corrosion defect interaction, Crack assessment Dent assessmentDent properties and behaviour, Causes of dents in subsea pipelines, Methods of assessment, Worked example, Exercise, Case studies IsolationOperations issues, Tethered isolation plugs, Remote set isolation pigs, Remote set spheres, Pipe freezing, High friction pigs, Hot tap and stopple, Environment and safety Offshore repairsPipewrap, Clamp repairs, Spool repairs, Mechanical connectors, Hyperbaric welding, Other repair methods
Life extension and decommissioningPipeline design life, Pipeline life extension, Pipeline decommissioning, Decommissioning regulations, Status of subsea decommissioning, Decommissioning options
Exercises and worked examples on:Span VIV screening criteria, External inspection, Stability assessment, Upheaval buckling, Defect assessment, Survey results
Course information
Level: Practitioner
Duration: 4 days
CPD points: 28
17
This course will build an in-depth technical knowledge of integrity management issues affecting deepwater risers and flowlines. Learn directly from case-studies of real pipeline failures, reviewing why the failures occurred and understanding how lessons learned can be applied to your pipelines.
Delegates will develop an understanding of efficient ways to perform integrity assessments and manage corrosion defects in order to ‘build’ integrity into all phases of offshore pipeline projects to improve operating costs and reduce the risk of pipeline failure.
Who this course is for
Engineers and managers who work on integrity management projects, are responsible for maintaining and operating subsea pipelines or those who require specific knowledge in this field, including:
Subsea pipeline engineers, specialists and managers
Integrity engineers
Flow assurance engineers
Certification engineers
Health and safety inspectors
Production engineers
Facilities engineers
Project managers
Operations engineers and managers
A massive amount of information, experience and real-life events consistently delivered – ideal for people already working in the integrity management field.Paul Mitchell, Integrity Co-ordinator, Apache Energy Ltd
Integrity management of subsea pipelines – Part 2
Course content Integrity management systemsIntegrity management strategy, Plan, Execute, Measure, Improve, Document management and reporting, Risk-based inspection, Emergency response, Incident investigation and learning, Integrity management standards Integrity during design and installationRigid pipeline design for operations, Rigid riser design for operations, Rigid pipeline installation, Rigid riser installation, Commissioning Case study 1: Pipeline installation failureNorth Sea application – Failure during installation. The facts and circumstances surrounding a pipeline installation failure will be reviewed and discussed in this group exercise. Looking at what really happened, why it happened, how the failure could have been prevented and lessons learned
Integrity during operationIntroduction, Flow assurance, Operation and remediation, Inspection methods Case study 2: Pipe-in-pipe installation and operational failureGulf of Mexico application - Complex design of pipeline and riser, How would you deal with the design problems?, Failure during commissioning and operation, Examine immediate and root causes, Further failure later in operation, Lessons learned
Case study 3: Pipe-in-pipe failure during operationNorth Sea application - One of the first pipe-in-pipe designs, What were the design faults?, Failure during operation, Examine immediate and root causes, Lessons learned
Case study 4: Pipeline operational failureNorth Sea application - Loss of pipeline stability, Examine options for remediation, Discussion of selected solution, Lessons learned
Integrity of flexiblesMaterials and makeup, Inspection techniques, Monitoring methodsDesign and installation incidents, Operational deterioration and damage Case study 5: Flow–induced pulsationsIntroduction, FLIP – theory and dependencies, Potential problems, Corrective actions, Lessons learned Integrity of umbilicalsMaterials and makeup, Inspection techniques, Monitoring methods, Design and installation incidents, Operational deterioration and damage
Case study 6: Umbilical failureNorth Sea application – Blockage of umbilical hoses. The facts and circumstances surrounding an umbilical failure will be reviewed and discussed in this group exercise. Looking at what really happened, why it happened, how the failure could have been prevented and lessons learned
Course information
Level: Practitioner
Duration: 4 days
CPD points: 28
18
This is an in-depth, technical course, detailing the engineering behind reel-lay installation. It explains key design aspects such as the implications of cumulative plastic strain, ovalisation and weld defects.
Gain guidance on codes and patents, learn about the reeling market and understand lessons learned from past successes and failure.
Who this course is for
Engineers and contractors who are or will be involved in pipeline reeling, including:
Subsea engineers
Pipeline engineers
Project engineers
Project managers
Structural engineers
Installation engineers
Pipeline production co-ordinators
Welding and materials engineers
Equipment engineers
Field engineers
Equipment vendors
Pipeline technical authorities
Jee definitely has a passion for sharing experience and offshore specific technical knowledge for pipeline engineering.Benjamin Gaultier, Field Engineer, Saipem
ReelingCourse information
Level: Practitioner
Duration: 4 days
CPD points: 28
Course content Reel-lay processReel-lay system, Configuration,Spool site, Reeling on, Reeling off,Start-up, Pipe-lay, Weather constraints, Lay down
Reeling history and current marketHistory and development of reeling, Reeling ships and companies around world
Case studies: failures and successesWrinkles, Buckles, Unwinding, TwistingCoating damage, Field joint buckles, Lined pipes joint failure, Hold off clamp failure, Deepwater case study, Pipe-in-pipe case study, 16” diameter case study
Codes and patentsCodes relating to reeling, Rules, regulations and code choices around the world, Patents relating toreeling
Strain concentration effectsStress-strain curves forpipeline steels, Effect of strain on material properties, Plastic behaviour during reeling and straightening– cumulative strain, Exercises
Material and weld defectsMaterials and weld qualification procedures for high strain applications, Weld defect assessment methods, Inspection methods for welds and their limits of detection of defects, Worked example, Exercise
OvalisationThe ovalisation of pipe during reeling, and the recovery during straightening, Formulae for collapse, pressure and combined loading, In situ measurement of Ovality, Worked example, Exercise
Reeling forcesForce required to yield pipe onto the reel, Force on the drum,Force required from thestraightener, Gripping force on thetensioners, Exercises
Exercises on:Strain concentration, Fracture assessment, Ovality, Reel radius versus water depth, Reeling forces
Courtesy of Port of Sunderland
19
We have other short courses available, plus individual modules that may be relevant for your training. If you can’t see what you are looking for then call us with your ideas and we can write new modules or a course to suit you.
Introduction to the oil and gas industry
1 day foundation level course
Gain a good overview of the industry from its origins and exploration methods to production processes and commercial trends. Also get to grips with industry terminology and acronyms.
Polymers and composites
1 day foundation level course
Gain an understanding of polymers and composites, looking at material production, design and fabrication.
Flow assurance
2 day foundation level course
Gain an understanding of the engineering principles of flow assurance, including single phase flow, multiphase flow, causes of flow restriction and flow control methods.
Oil import, stabilisation and export
3 day foundation level course
Gain an understanding of the nature of crude oil and how to store it. Also find out about piping and pipeline loads, corrosion control, operations, pigging and control and safety.
Rigid riser design
4 day practitioner level course
Gain detailed technical knowledge of all types of risers, the design approaches used and how to apply them in both static and dynamic assessments.
Other courses available
Pick and choose topics from different
courses
Standard course
Write a new course
20
Our tutors Mike Hawkins BTech (Hons) CEng FIMechE Technical Director
Mike is the Technical Director at Jee and has over 25 years’ experience in the design, construction and operation of pipelines. He has particular expertise in conceptual and detailed design of pipeline and rigid riser systems, computer analysis of fluid, mechanical, structural, soils and thermal problems, upheaval and lateral buckling, analysis of freespans, vortex-induced vibrations and fatigue assessment, risk and reliability analysis and FE analysis.
Mike currently manages the integrity management of Perenco’s 1600km of pipelines and umbilicals in the southern North Sea, a relationship that has been ongoing for over 6 years.
Jonathan Franklin BEng (Hons) MIMechE MCMI CMgr CEng Engineering Manager
Jonathan is the Engineering Manager at Jee and has over 15 years’ experience of pipeline engineering studies and project work in the oil and gas industry. He has particular expertise in pipeline span assessment, remnant life assessment, onshore pipeline design, subsea LNG pipelines, failure investigation, pipeline integrity management, subsea insulation systems, defect assessment and deep and ultra-deepwater pipeline design.
Jonathan is course director for Design of subsea pipelines – Parts 1 and 2 and Integrity management of subsea pipelines – Part 2. He has recently worked on the basic engineering for the Laggan-Tormore project, which is currently the most significant oil and gas project in development in the UK.
Alan G Knowles BSc (Hons) CEng MICE Eur Ing Civil and Construction Specialist
Alan has over 25 years’ experience in the design and construction of offshore pipelines and landfalls. He has particular expertise in installation methods for subsea lines for hydrocarbon developments, design and specification of onshore and offshore pipelines, soil assessment for pipeline trenching, burial and pile design, calculations for coated pipelines with regard to stability and thermal insulation and subsea pipe bundles.
Alan has a wide range of expertise and is course director for many of Jee’s courses, including, Construction of subsea pipelines and Installation calculations for subsea pipelines. Alan also specialises in tuition for our online distance learning courses.
Alan G Knowles, Civil and Construction Specialist
Jonathan Franklin, Engineering Manager
Mike HawkinsTechnical Director
21
Our tutor’s knowledge of the subject area was excellent, I gained a lot from this course.Gerard Aden, Senior Pipeline Engineer, J. Ray McDermott Middle East
Dr Phil Medlicott BSc PhD CEng MIMechE Principal Engineer
Phil has nearly 20 years’ experience in pipeline engineering studies for the oil and gas industry. He has particular expertise in FEED studies, pipeline piggability studies, pipeline stability analysis, trawl gear interaction with pipelines, verification, design and cost studies of alternative subsea pipeline and umbilical schemes and determining suitability of mechanical connectors for S and J-lay.
Phil is course director for Integrity management of subsea pipelines – Part 1 and has recently worked on projects including the Laggan-Tormore development as well as piggability studies and direct assessment for BP.
Stuart Joynson BSc (Hons) Offshore Construction Specialist
Stuart is an engineering consultant with over 35 years’ experience in offshore pipeline design and construction. During this time he has worked for oil companies, offshore contractors and engineering consultants.
Stuart’s particular expertise includes subsea trenching, flowline bundle fabrication and installation, landfall construction, offshore pipeline installation, marine outfalls, tanker terminals, offshore renewables, pipeline refurbishment and decommissioning activities.
Stan Stirton FIMarEST Principal Engineer and Courses Specialist
Stan has over 35 years’ experience in the oil and gas industry in both project and Inspection, maintenance and repair (IMR) roles, including 15 years as IMR Team Leader on Shell’s Subsea facilities. He has lectured on a regular basis since 1999.
Stan has particular expertise in subsea control systems and brings his extensive experience to the classroom. He also has significant knowledge of pipeline construction and was a Project Engineer responsible for purchase, procurement, installation and testing of flexible flowlines and electro/hydraulic umbilical systems.
Stan Stirton Principal Engineer and Courses Specialist
Stuart Joynson Offshore Construction Specialist
Dr Phil MedlicottPrincipal Engineer
22
Career development is becoming more and more important and investing in training helps motivation and ensures engineers reach their full potential. Completing Jee’s courses and assessments can count towards gaining a globally recognised academic qualification. So if you or your team want be experts in the subsea field, find out more about the qualifications below, or visit www.jee.co.uk.
Academic qualifications
MTech in Petroleum Technology with Curtin University
Complete Jee’s 9 accredited courses and assessments to gain 100 credits (50%) towards a Masters in technology degree.
MT556SUBSEA SYSTEMSSUBSEA PIPELINES
RISERS, UMBILICALS AND FLExIBLES
MT557DESIGN OF SUBSEA PIPELINES – PART 1DESIGN OF SUBSEA PIPELINES – PART 2
MT558CONSTRUCTION OF SUBSEA PIPELINES
INSTALLATION CALCULATIONS FOR SUBSEA PIPELINES
MT559INTEGRITY MANAGEMENT OF SUBSEA PIPELINES – PART 1INTEGRITY MANAGEMENT OF SUBSEA PIPELINES – PART 2
MT50625 credits
MT50725 credits
MT50825 credits
MT50925 credits
Curtin workplace-based projects: 100 creditsComplete 4 Curtin projects:
Jee courses + Curtin assessments: 100 creditsEach module = 25 credits.
MSc in Subsea Engineering with Robert Gordon University
Complete Jee’s 6 accredited courses and assessments to gain 60 credits (33%) towards a Masters in science degree.
ENM223 DESIGN OF SUBSEA PIPELINES – PART 1DESIGN OF SUBSEA PIPELINES – PART 2
ENM224 CONSTRUCTION OF SUBSEA PIPELINES
INSTALLATION CALCULATIONS FOR SUBSEA PIPELINES
ENM225 INTEGRITY MANAGEMENT OF SUBSEA PIPELINES – PART 1INTEGRITY MANAGEMENT OF SUBSEA PIPELINES – PART 2
ENM217 ENM218
ENM220
ENM214INDIVIDUAL ENGINEERING RESEARCH INVESTIGATION (DISSERTATION)
ENM228 ENM233
Semester 1: 60 creditsComplete 4 core RGU modules:
RGU modules:
Semester 2: 60 creditsComplete 4 modules from a choice of 8. Each module = 15 credits.Jee courses + assessments
Semester 3: 60 credits
180 credits = MSc
200 credits = MTech
Interested?
Both programmes can be completed part-time and online. Visit www.jee.co.uk for details on modules, degree entry requirements and how to apply.
ENM20115 credits
ENM20215 credits
ENM21515 credits
ENM22715 credits
23
Course enquiries and bookings
To discuss your training requirements, please call us on one of the numbers below or visit www.jee.co.uk for further details.
Public and online distance learning course enquiries
Tel: +44 (0) 1732 371 391
Email: [email protected]
In-company course enquiries
Tel: +44 (0) 1732 371 369
Email: [email protected]
Feedback, ideas and suggestions
Tel: +44 (0) 1732 371 385
Email: [email protected]
Contact Jee
Jenny MatthewHead of Courses
Jamie Burrows Business Development Manager
Cara Low Courses Co-ordinator
This brochure is available for download at www.jee.co.uk
Jee Limited Registered in England and Wales No. 3579143
Head office
Jee LimitedHildenbrook HouseThe SladeTonbridgeKent TN9 1HRUnited Kingdom
Tel: +44 (0)1732 371 371
Email [email protected] www.jee.co.uk
Aberdeen officeJee Limited2 Abercrombie CourtArnhall Business ParkProspect RoadWesthillAberdeen AB32 6FEUnited Kingdom
Tel +44 (0)1224 392 040
Email [email protected] www.jee.co.uk
Abu Dhabi office
Jee Technical & Engineering Services LLCPO Box 45027Abu DhabiUnited Arab Emirates
Tel +971 2632 6953
Email [email protected]