Upload
joni-benton
View
227
Download
2
Embed Size (px)
DESCRIPTION
Jands NZ - Installed Audio Products including AKG Professional, BSS Audio, Crown Audio, dbx Professional, JBL Professional and Soundcraft.
Citation preview
INSTALLED AUDIO
INSTALLED AUDIO
» INSTALLED AUDIO / 54 / INSTALLED AUDIO « » INSTALLED AUDIO / 5
INSTALLEDAUDIO
30 Low impedance amplifiers ..............................................30High impedance amplifiers .............................................30
AMPLIFIERS
Analog Consoles............................................................. 48Digital Consoles.............................................................. 49Digital Stageboxes ......................................................... 4948
MIXING CONSOLES
In-wall Loudspeakers ..................................................... 32In-ceiling Loudspeakers................................................. 32High power in-ceiling loudspeakers ............................. 3432
IN-CEILING/IN-WALL LOUDSPEAKERS
JBL AWC Speakers installed in Pukekohe Township
Surface Mount Loudspeakers ........................................ 36Subwoofer/Satellite Speaker Systems ......................... 38Pendant Speakers .......................................................... 39Column Loudspeakers ................................................... 40High Power Loudspeakers ............................................. 41All Weather Loudspeakers ............................................ 42Line Arrays ..................................................................... 44Nightclub Loudspeakers ................................................ 46
36SURFACE MOUNT LOUDSPEAKERS
06MICROPHONES
Wireless Systems ............................................................. 6Gooseneck Microphones .................................................. 8Boundary Microphones .................................................. 14Paging Microphones ....................................................... 16Headworn and Lavalier Microphones ............................ 16Automixers ...................................................................... 17Conference Systems ...................................................... 18
20ZONE PROCESSORS
Retail & Cafe Turn-key Systems ................................. 20Digital Signal Processors .............................................. 22Network Digital Signal Processors ............................... 24Network Paging Systems ............................................... 28
INSTALLED AUDIO
INSTALLED AUDIO
» INSTALLED AUDIO / 76 / INSTALLED AUDIO « MICROPHONES MICROPHONES
WMS470 professional analog wireless microphone system is the best choice for a cost-efficient, high-performance multichannel system. The pilot tone prevents the user from unexpected startup noise and it continuously sends transmitter data including low battery information to the receiver.
AKG WMS470 WIRELESS SYSTEMS
WIRELESS SYSTEMS
Perception Wireless is a high-performance analog wireless microphone systems which delivers brilliant sound and is easy to use. It is the optimal plug and play wireless solution for small stages, clubs, places of worship, hotels, and gyms.
AKG WMS45 PERCEPTION WIRELESS SYSTEMS
SINGLE CHANNEL SYSTEMS
WMS45-VOCAL 1 x SR45 reciever, 1 x HT45 handheld transmitter
WMS45-INST 1 x SR45 receiver, 1 x PT45 bodypack transmitter, 1 x MKGL instrument cable
WMS45-HEADSET 1 x SR45 receiver, 1 x PT45 bodypack transmitter, 1 x C544L Headworn mic
WMS45-LAPEL 1 x SR45 receiver, 1 x PT45 bodypack transmitter, 1 x CK99L Lapel mic
HT45 PT45 SR45
MKGLCK99LC544L
SINGLE CHANNEL SYSTEMS
WMS470-D5 1 x SR470 reciever, 1 x PT470-D5 handheld transmitter
WMS470-C5 1 x SR470 reciever, 1 x PT470-C5 handheld transmitter
WMS470-HEADSET 1 x SR470 receiver, 1 x PT470 bodypack transmitter, 1 x C555L Headworn mic
WMS470-INST 1 x SR470 receiver, 1 x PT470 bodypack transmitter, 1 x MKGL instrument cable
WMS470-LAPEL 1 x SR470 receiver, 1 x PT470 bodypack transmitter, 1 x CK99L Headworn mic
WMS470-PRESENTER 1 x SR470 receiver, 1 x PT470 bodypack transmitter, 1 x CK99L Headworn mic and 1 x C555L Headworn mic
HT470 PT470
CU400
SR470
MKGLCK99LC544L
The WMS4500 analog reference wireless microphone system provides highest channel quantity, maximum reliability and easy setup for large theatre, installed sound and tour sound applications. An optional network remote control allows frequency coordination and monitoring of multi-channel systems via PC software System Architect™, Apple iPhone/iPad/iPod® or via Soundcraft Vi consoles. Includes Pilot Tone transmission for transmitter battery status monitoring and tone code squelch.
AKG WMS4500 WIRELESS SYSTEM
WIRELESS COMPONENTS
SR4500 Diversity wireless receiver, includes rack mount kit
HT4500 Handheld transmitter available with either C535, C5, D7 or D5 mic heads
PT4500 Bodypack transmitter
CU4000 Dual charging unit. I hour quick charge.
PS4000 Central power supply unit for charging up to 12 receivers or 3 charging units
HUB4000Q HiQnet Ethernet interface,. Connects up to 8 wireless devices. iPhone app for HiQnet remote contol.
HT4500 PT4500 SR4500
Headworn and Lavalier microphone options Pg 14 Antennna options and Accessories Pg 110-112
AKG’s revolutionary DMS700 V2 has been designed for theater, conference, live-production and tour-sound applications. Offering bandwidth of up to 155MHz. The state-of-the-art 512-bit audio encryption offers the highest security available for courtroom, boardroom and other confidential meeting environments. An optional network remote control allows frequency coordination and monitoring of multichannel systems by PC software System Architect™, Apple iPhone/iPad/iPod® or Soundcraft Vi consoles.
AKG DMS700 V2 DIGITAL WIRELESS SYSTEM
DIGITAL WIRELESS COMPONENTS
DSR700 V2 Dual diversity digital wireless receiver including graphic spectrum analyzer & dsp, includes rack mount kit
DHT700 V2 Handheld transmitter available with either C5, D7 or D5 mic heads
DPT700 V2 Bodypack transmitter with selectable output power up to 50mW
CU700 Dual transmitter charging unit. 2 hour charging for up to 8 hours battery life
HUB4000Q HiQnet Ethernet interface,. Connects up to 8 wireless devices. iPhone app for HiQnet remote contol.
DHT700 PT4500
SR4500
CU4000
PS4000
HUB4000Q
HUB4000QCU700
SINGLE CHANNEL SYSTEMS
CU400 Dual transmitter charging unit. 2 hour charging up to 8 hours battery life
Headworn and Lavalier microphone options Pg 14 Antennna options and Accessories Pg 110-112
• Up to 8 hours AA battery• Up to 6 channels• 10mW
• Up to 14 hours AA battery• Up to 16 channels• Rack mount kit included• 50mW
• Up to 15 hours AA battery• Up to 70 channels• 50mW
• Up to 8 hours 2 x AA battery• Up to 40 channels• 50mW
INSTALLED AUDIO
INSTALLED AUDIO
» INSTALLED AUDIO / 98 / INSTALLED AUDIO « MICROPHONES MICROPHONES
AKG DISCREET ACOUSTICS COMPACT (DAC) SERIES
The DAC (Discreet Acoustics Compact) series is a unique range of high class microphones for applications where budget, not modularity, is a major consideration. The DAC series offers a user-friendly system that fulfills its basic functions perfectly. While an excellent price-performance ratio was achieved by focusing on essential features, no compromise was made with regard to the sound of the capsules.
All microphones are equipped with proper RF shielding to meet the high demands for electromagnetic compatibility in everyday installations. The mix of high class acoustics, RF shielding and the rugged all-metal part design makes the DAC series easy to install and absolutely reliable in use.
The DAC series offer a high class microphone for any application at a remarkable price point.
CGN99C-S CGN99C-L
Cardioid gooseneck microphone,125° pickup angle
3pin male XLR connector
9 to 52V phantom power
Dia: 13.5mmLength: 380/580 mm
Included: Windscreen
Optional: B18, PS3LOCK, H500, H600, SA60, ST1, ST45
CGN99H-S CGN99H-L
Hypercardioid gooseneck micro-phone, 95° pickup angle
3pin male XLR connector
9 to 52V phantom power
Dia: 13.5mmLength: 380/580 mm
Included: Windscreen
Optional: B18, PS3LOCK, H500, H600, SA60, ST1, ST45
CHM99-BLK
Condenser cardioid hanging micro-phone, 125° pickup angle
10 m cable with 3pin male XLR
9 to 52V phantom power
Dia: 13.5 mmLength: 55 mm
Included: Windscreen
CHM99-WH
Condenser cardioid hanging micro-phone, 125° pickup angle
10 m cable with 3pin male XLR
9 to 52V phantom power
Dia: 13.5 mmLength: 55 mm
Included: Windscreen
DGN99 DGN99E
PA goosenect microphone
DGN99: unterminated ends with 2m cableDGN99E: 3pin male XLR
9 to 52V phantom power
Dia: 34 mmLength: 345 mm
Optional DGN99E: PS3LOCK
Available in White or Black
DST99S
General PA / Communications rugged paging microphone
Coiled cable approx. 50-100cm with 3pin male XLR
On/off switch
Length: 23 mmWidth: 120 mmHeight: 410 mm
GOOSENECK MICROPHONES
CGN321STS
Tabletop cardioid microphone set for conference, courtroom and lecturns
3pin male XLR connector
9 to 52V integrated phantom power
Length: 300 mm
Included: W30 Windscreen
CGN521STS
Tabletop cardioid microphone set for conference, courtroom and lecturns
3pin male XLR connector
9 to 52V integrated phantom power
Length: 500 mm
Included: W30 Windscreen
NEW NEW
Accessories Pg 110-113 Accessories Pg 110-113
INSTALLED AUDIO
INSTALLED AUDIO
» INSTALLED AUDIO / 1110 / INSTALLED AUDIO « MICROPHONES
GN E GOOSENECK AND GN ESP GOOSENECK ACCESSORIES ONLY:
HM1000
Hanging module with 10m cable and 3pin male XLR
Capsule required (see below)
9 to 52V phantom power
250Hz, -10dB at 50Hz Bass rolloff filter
Dia: 13.5mmLength: 50 mm
Required: Capsule (see pg 10)
Included: Spring steel hanging clamp
Optional: B18
GN155-SET
Elegant gooseneck floor standwith 3pin male XLR
Capsule required (see below)
9 to 52V phantom power
250Hz, -10dB at 50Hz Bass rolloff filter
Dia: 180 mmLength: 1490 mm
Required: Capsule (see pg 10)
Included: ST305, extension tube
Optional: B18
ST6
Heavy duty table stand for universal use. It provides two professional 3-pin XLR connectors as audio interface. The ST6 is compatible with wide range of microphones, e.g. the gooseneck microphones of the Compact and DAM series.
GN GOOSENECK ACCESSORIES ONLY:
OTHER GOOSENECK MICROPHONES:
MF-DA
Where impractical to fix a goose-neck from below, the rugged, all metal MF-DA can be screwed on permanently and allows you to route the cable above or below the tabletop. Popular mounting option for altars and lecterns.
ST45
Low profile stand with off-center mount, rubber shock mount feet (Dia. 11.5 cm)
PS3FLOCK
Classic theft-proof lockable panel mount socket.
The PS 3FLock requires a 22 mm mounting hole.
SA60 & ST45
SA60 - Stand Adapter for straight shaft mics
ST45 - Low profile stand with off-center mount, rubber shock mount feet (Dia. 11.5 cm)
H600
Shock mount for permanent installation. Included with the H600 is the A608 insert. The A608 grips the narrow section of the gooseneck and allows for custom height adjust-ments. The H600 requires a 53 mm mounting hole.
H500
Shock mount for permanent installation.
The H500 requires a 50 mm mount-ing hole.
GOOSENECK MICROPHONES
AKG DISCREET ACOUSTICS MODULAR (DAM) SERIES
The Modular Series from AKG Acoustics is used worldwide and has been proving its worth for many years. Offering a choice of five capsule modules with different polar patterns and frequency responses. A wide range of goosenecks and installation modules is also available. A wide range of features minimizes the risk of operating errors, material fatigue, or signal dropouts. The LED ring and self-cleaning gold-plated contacts for the threaded connections and a switchable bass rolloff filter come as standard.
GN15 GN30 GN50
For permanent screw-on installation1.5m cable with 3pin male XLR
9 to 52V phantom power
250Hz, -10dB at 50Hz Bass rolloff filter
Dia: 20mmLength: 160/305/500 mm
Required: Capsule (see below)
Included: DPA phantom power, screw set with rubber bush
Optional: MF-DA, H600, ST1, ST45
GN15E GN30E GN50E
3pin male XLR connector
9 to 52V phantom power
250Hz, -10dB at 50Hz Bass rolloff filter
Dia: 20mmLength: 235/380/572 mm
Required: Capsule (see below)
Included: Integrated DPA phantom power
Optional: H500, H600, PS3LOCK, SA60, ST45, ST1
GN15ESP GN30ESP GN50ESP
3pin male XLR connector with programmable mute switch- on/off, push to talk, push to mute
9 to 52V phantom power
250Hz, -10dB at 50Hz Bass rolloff filter
Dia: 20mmLength: 260/405/600 mm
Required: Capsule (see below)
Included: Integrated DPA phantom power
Optional: H500, H600, PS3LOCK, SA60, ST45
GN15E5PIN GN30E5PIN GN50E5PIN
3pin male XLR connector
9 to 52V phantom power
250Hz, -10dB at 50Hz Bass rolloff filter
Dia: 20mmLength: 235/380/572 mm
Required: Capsule (see below)
Included: Integrated DPA phantom power
Optional: H500, H600, PS3LOCK, SA60, ST45
GN GOOSENECK CAPSULES:
CK31
Cardioid screw-on capsule
Wide pick up angle ie 1 or more people using the mic
125° pickup angle
Length: 20 mm
Included: W30 windscreen
CK32
Omnidirectional screw-on capsule
Suitable for recording or serveillance use
360° pickup angle
Length: 20 mm
Included: W30 windscreen
CK33
Hypercardioid screw-on capsule
Suitable for court rooms, houses of worship, embassies
95° pickup angle
Length: 20 mm
Included: W30 windscreen
CK47
Hypercardioid screw-on capsule
Studio quality, optimum for speech miking
80° pickup angle
Length: 146 mm
Included: W70 windcreen
CK80
Hypercardioid screw-on capsule
Provides excellent intelligibility in acoustically difficult environments
80° pickup angle
Length: 128 mm
Included: W30 windscreen
MICROPHONES
NEW
GN: GN E: GN ESP: GN E 5PIN:
Accessories Pg 110-113 Accessories Pg 110-113
INSTALLED AUDIO
INSTALLED AUDIO
» INSTALLED AUDIO / 1312 / INSTALLED AUDIO «
GOOSENECK MICROPHONES
Gooseneck microphones are often overlooked but they are high performing electro-acoustic devices which carry out difficult work discreetly and reliably. They have to function flawlessly in demanding situations with very different, often inexperienced speakers yet at the same time deliver perfect speech clarity. AKG gooseneck microphones have been in continuous use at international meetings, conferences, summits, in parliaments and churches for more than three decades.
To quote the Modular Plus series please choose a mounting module, capsule, powering module and accessory if required:
AKG DISCREET ACOUSTIC MODULAR PLUS (DAM+) SERIES
MOUNTING MODULE OPTIONS:
POWERING MODULE OPTIONS:
CAPSULE OPTIONS:
ACCESSORY OPTIONS:
MODULAR PLUS SYSTEM OVERVIEW:
GN15M GN30M GN50M
Premium gooseneck modules for permanent and mobile installations
Integrated switchable LED ring
Dia: 6mmLength: 165/300/500 mm
Required: Capsule see below
Included: LED ring expander
Optional: MFM, MF-DA, H600, ST1, ST45, plus all accessories (see page 11)
GN155M
Premium gooseneck with heavy shock mounted floor stand
Integrated switchable LED ring
1m cable with ModularPlus connector to fit all phantom power modules
Dia: 6mmLength: 1490 mm
Required: Capsule see below
Included: LED ring expander
Optional: all accessories (see page 11)
HM1000M
Premium hanging gooseneck module
Integrated switchable LED ring
10m cable with ModularPlus connector to fit all phantom power modules
Dia: 6mm
Required: Capsule see below
Included: LED ring expander, hanging clamp
Optional: all accessories (see page 11}
CK49
Reference condenser hyper-cardioid screw-on shotgun capsule
80° pickup angle
Dia: 9mmLength: 122 mm
Included: Windscreen
Optional: W40M Metal Windscreen
CK43
Reference condenser super-cardioid screw-on capsule
95° pickup angle
Dia: 9mmLength: 20 mm
Included: Windscreen
Optional: W40M Metal Windscreen
CK41
Reference condenser cardioid screw-on capsule
125° pickup angle
Dia: 9mmLength: 20 mm
Included: Windscreen
Optional: W40M Metal Windscreen
PAESPM
Programmable phantom power module with RFi Shield Technology
DAM+ system connector
9-52V input
Dia: 19 mmLength: 100 mm
Includes programmable switch
PAE5M
Phantom power module with RFi Shield Technology
5-pin XLR connector
9-52V input
Dia: 19 mmLength: 65 mm
Extra feed for LED ring
PAEM
Phantom power module with RFi Shield Technology
3-pin XLR connector
9-52V input
Dia: 19 mmLength: 65 mm
MK150M MK150ML
Reference condenser hyper-cardioid screw-on shotgun capsule
80° pickup angle
Dia: 9mmLength: 122 mm
Included: Windscreen
STSDAM
Heavy duty table stand with extremely good shock absorbing properties. Modular plus 4 pin connector compatible with all Modular Plus Series goosenecks as well as with the gooseneck microphones of the CS3 discussion system. Programmable switch: push to talk, push to mute, push on/off, low cut on/off.
ST6
Heavy duty table stand for universal use. It provides two professional 3-pin XLR connectors as audio interface. The ST6 is compatible with wide range of microphones, e.g. the gooseneck microphones of the Compact and DAM series.
MFM
Flush mount module for reducing body noise from tables. Microphone can be detached when not in use. A special blind cap seals the connector outlet to protect against dust and for an attractive flush interface.
UWA9M
Holder for wireless body-pack transmitters. For use with GN155M floor stand gooseneck module.Use with the MK150ML to create a wireless floor stand microphone for presentations or for choir and instrumental recording.
W40M
Reference windscreen with the highest performance in its class. Two layers of mesh and a combination of foam reduce wind and pop noise to a minimum. Compatible with CK41 and CK43 capsules.
MICROPHONES MICROPHONES
NEW
Accessories Pg 110-113 Accessories Pg 110-113
INSTALLED AUDIO
INSTALLED AUDIO
» INSTALLED AUDIO / 1514 / INSTALLED AUDIO «
AKG BOUNDARY MICROPHONES
BOUNDARY MICROPHONES
C547BL
Theatre, Onstage miking, Church, Lectern, Conferencing, Kick drums
Hypercardioid studio quality
3m cable, 3-pin XLR connector
Included: W547 windscreen
PCC130 PCC130SW
Conferencing, Lectern, Distance Learning, Security, Courtrooms
Boundary layer microphone
Cardioid (PCC130/SW)Supercardioid (PCC170/SW)
Silent operating on/off switch (SW)
12-48V phantom power
TB3M connector
PCC160
Onstage miking, Conferencing, Theatre, Lectern
Industry standard supercardioid boundary layer floor microphone
3 position bass-tilt switch
4.6m cable, TA3F connector
PZM10 PZM10LL
Conferencing, Surveillance & Security and Ticket Windows
Flush-mount hemispherical bound-ary layer microphone
Choice of mic level output or line-level output (PZM10 LL) for optimized level matching
12-48V phantom power (PZM10)12V-24VDC (PZM10LL)
3-pin XLR connector (PZM10)Unterminated wires (PZM10LL)
Off white finish, paintable
PZM11 PZM11LLWR
Surveillance & Security and Ticket Windows, Outdoor Intercoms (WR)
Flush-mount Hemispherical boundary layer microphone,
PZM11LLWR weather resistant (WR)
PZM11LLWR Line-level output connects directly to video recorders
12 to 48V phantom power (PZM11)12 to 24 V AC or DC (PZM11LLWR)
Screw terminal connectors
Off white finish, paintable (PZM11)Silver, paintable (PZM11LLWR)
PZM30D PZM6D PZM185
Music recording, Conference, Theatre
Hemispherical boundary layer microphone
3-pin XLR (PZM30D)XLRM 1.8m cable (PZM6D)3-pin XLR 2.4m cable (PZM185)
CBL410PCC
Plug and play desktop microphone for VOIP applications or recording.
Omnidirectional boundary mic
Cascadable up to 5 units
3.5mm stereo jack, 100cm cable
Available in black and white
CBL410CS
Turn any PC or Mac with USB 2.0 port into an excellent VoIP conference system for up to 10 persons!
Kit comes with 3 x CBL410-PCC and 1 x GHAP1 USB adapter
3.5mm stereo jack, 100cm cable
Available in black and white
CBL410WS
Workstation set for VoIP communica-tion on a single PC or Mac with USB 2.0 port.
Kit comes with 1 x CBL410-PCC, 1 x K20 stereo headphones and 1 x GHAP1 USB adapter
3.5mm stereo jack, 100cm cable
Available in black only.
MB3
Church, Conferencing, Lectern, Secu-rity, Courtrooms
High-performance, supercardioid flush-mount boundary layer microphone
12-48V phantom power
3-pin XLR connector
MB4
Church, Conferencing, Lectern, Secu-rity, Courtrooms
Supercardioid flush-mount boundary layer microphone
12-48V phantom power
4.6m cable, 3-pin XLR connector
C562CM
Recording, Surveillance, Counters
Low profile bounday layer mic
0.5m cable, with 3-pin CLR connector
9 to 52 V phantom power
Dia: 28mmLength: 20mm
Included: Installation hardware and phantom power adapter
SOUNDGRABBER2
Conferencing, Theatre, Church
Hemispherical boundary layer microphone
AAA internal 1.5V battery
1/4" Jack Mono connector
CROWN BOUNDARY MICROPHONES
CBL99
Recording
Hemispherical boundary layer microphone
3m fixed cable with 3pin male XLR connector
9 to 52V phantom power
Dia: 80mmLength: 5 mm
Included: Adhesive
AKG CBL SERIES BOUNDARY MICROPHONES
MICROPHONES MICROPHONES
NEW
PLUG N PLAY
VOIPmicrophones
INSTALLED AUDIO
INSTALLED AUDIO
» INSTALLED AUDIO / 1716 / INSTALLED AUDIO «
DMM6
Digital Automatic Microphone Mixer
6 Channel input - 1x Stereo Output Input Channels: 6x: Line, Mic, Aux, mono, XLR type
Matix - create different mixes to different outputs
Cascadable up to 10 units (up to 60 inputs)
Phantom Power: +48V, max 10mA per input
Level: -60dBu to 0dBu
Noise Level (22Hz-22kHz, QPK): <-120dBu
DMM12 DMM12BC
Digital Automatic Microphone Mixer
12 Channel input - 2x Stereo OutputInput Channels: 12x: Line, Mic, Aux, mono, Phoenix Type
Two additional stereo audio and one Stereo AES EBU output (DMM12BC only)
Matix - create different mixes to different outputs
Cascadable up to 10 units (up to 120 inputs)
Phantom Power: +48V, max 10mA per input
Level: -60dBu to 0dBu
Noise Level (22Hz-22kHz, QPK): <-120dBu
The DMM6, 12 and 12BC are based on a highly sophisticated algorithm. It offers a high S/N ratio while reducing the number of open microphones to a minimum. Numerous DSP functions make the new generation of DMM highly professional – all out of one 19” 1HU device. The DMMs are cascadable up to 10 units.
All 12 (6) inputs are individually routable to 2(1) stereo outputs, one stereo record output and an AES-EBU (at DMM12BC) output. An RS232 interface allows external control – e.g. AMX or Crestron. The following adjustable functions are available: - Level, Treble, Bass, Low Cut, Limiter, Compressor, Automixing yes/no, Priority (ducking), Pan / Balance, Routing To REC, Routing To Out1, Routing To Out2, Delay. In addition the DMM12BC provides a 12 band graphic EQ on the 2 main outputs. An intuitive, unique user interface allows easy control and adjustment of each function, in case one would use an analogue device – but with all the advantages the digital world offers.
AKG DMM DIGITAL MICROPHONE MIXER SERIES
AUTOMIXERSPAGING MICROPHONES
AKG PAGING MICROPHONES
DST99S
Dynamic cardioid gooseneck microphone with rugged, all-metal body and stand
Table stand includes an on/off switch and coiled cable with 3-pin XLR
Table stand: 160 x 120 x 65 mm
DGN99 DGN99E
PA dynamic cardioid gooseneck microphone with rugged, all-metal body
DGN99: 2m unterminated cableDGN99E: 3-pin male XLR
Dia: 34mmLength: 345 mm
Optional accessories: PS3FLOCK and H500
AKG LAVALIER MICROPHONES
AKG HEADWORN MICROPHONES
LAVALIER & HEADWORN MICROPHONES
CK99L
Clip-on cardioid microphone for use with wireless systems
1.6m cable with 3pin male XLR
1.5 to 10VDC or 9 to 52V phantom power using MPA-V-L
Dia: 13.5mmLength: 55 mm
Included: Clip, W55 windscreen
MICROPHONES MICROPHONES
NEW
C555L
Vocal & speech applications
Cardioid
Condenser
Secure and comfortable fit
Includes W444 windscreen and moisture shield
3-pin mini XLR connector for wireless
C111LP
Theatre & presentation applications
Omnidirectional
Condenser
Ultra lightweight desing
Includes windscreen, protective bag and cable clip
3-pin mini XLR connector for wireless
DMM12BC
DMM12
DMM6
Accessories Pg 110-113 Wireless systems Pg 18-20
C417
Theatre & broadcast applications
Omnidirectional
Condenser
Includes W77 windscreen, H40-1 tie clip, H41 pin, adhesive putty, moisture shield, assorted colour windscreens
C417L: 3-pin mini XLR for wireless, blackC417LP: as above fleshtoneC417PP: XLR connector
CK97CL
For theatre & broadcast
Cardioid
Condenser
125° Pickup angle
Includes W97 windscreen, H40-1 tie clip, H41 pin
3-pin mini XLR connector for wireless
C544L
Aerobics & speech applications
Cardioid
Condenser
Secure and comfortable fit
Includes W444 windscreen and 4 x moisture shields
3-pin mini XLR connector for wireless
C544L-TA4F: TA4F connectorC544L: 3-pin mini XLR for wireless
CGN321STS CGN521STS
Tabletop cardioid microphone set for conference, courtroom and lecturns
3pin male XLR connector
Length: CGN321STS 300mm / CGN521STS 500mm
Included: W30 Windscreen
NEW
INSTALLED AUDIO
INSTALLED AUDIO
» INSTALLED AUDIO / 1918 / INSTALLED AUDIO «
CS5-IRT1
Infrared radiator
Up to seven language channels
Compliant to IEC-60914
2 BNC connectors and 50 Ohm coaxial cabling
300m working distance (CS5IRT1)500m working distance (CS5IRT2)
Inlcuded: U bracket
CS5-DU
Delegate Unit
Built-in microphone and loudspeaker
1 step voting from the unit
2 x 3.5mm headphone outputs
3+1 languages selectable for two users
Optional: CK Capsule, CS5MK1.25m - 20m and CS5PS12 PSU
CS5-IRR7
Infrared receiver
Up to seven selectable channels
3.5mm stereo jack for use with headphones
12 hours per charge
CS5-VU
Chairman/Delegate Unit
Built-in loudspeaker
1, 3, 5-way voting/polling function
Dip-switch selectable president and delegate operating modes
Up to 63 language channels independently selectable for two users
Optional: chip-card identification, CK Capsule, CS5MK1.25m - 20m and CS5PS12 PSU
K20
Conference stereo headphones
Lightweight and extremely comfortable
Replaceable foam ear pads
3.5mm jack connector
CS5-IU
Interpreter Unit
Built-in loudspeaker
Four input channels selectable: floor, two pre-selected languages, relay
Can be used with gooseneck, separate headphones or headset
Optional: CK Capsule, CS5MK1.25m - 20m and CS5PS12 PSU
The CS5 is a highly flexible, hardwired, digital conference system for fixed and mobile conference applications. With less than 10 different components, the CS5 can be configured to work as a small and mobile discussion system, or as a large permanently installed conference system where voting, delegate management, simultaneous translation and language distribution functions are needed.
The CS3 System is a modular and flexible conference system for small and medium size applications. It´s reliable components can be easily set up, wired and expanded. One CS3 base unit can support 60 microphones. With the help of a second base unit the system can be expanded to up to 120 units. The base unit connects to all relevant devices like PA, recording, external audio sources and camera control systems. Different operating modes enable automatic or controlled conferences, even without PC remote
AKG CS5 SERIES CONFERENCE SYSTEMAKG CS3 SERIES CONFERENCE SYSTEM
CONFERENCE SYSTEMS
MICROPHONES MICROPHONES
CS3BU
Base Unit - interface for all audio devices in meeting room including camera control
Work alone mode or remote controlled via RS232
Free or controlled speech modes
Plug and play - very easy setup
Four different operation modes
Power Supply: SMPS 100-240V (50Hz/ 60Hz) 3A
CS3CU30 and CS3CU50
Chairman Unit
Priority (mutes all delegates) and “next in line” (activate the next microphone in waiting list) button, speak button, a built-in loudspeaker and two headphone jacks
Power Consumption 3W, Power supplied by Base Unit
Intercommunication DIN8-pole
Headphone Output 9dBu, 8-32ohm, 3.5mm
CS3CU30: 300mmCS3CU50: 500mm
Dimension 170L x 143Wx 63H mm
Included: 2m cable, microphone, windscreen
CS3DU30 and CS3DU50
Delegate Unit
Power supplied by Base Unit
Speak button, a built-in loudspeaker and two headphone jacks
Power Consumption 3W, Power supplied by Base Unit
Intercommunication DIN8-pole
Headphone Output 9dBu, 8-32ohm, 3.5mm
CS3DU30: 300mmCS3DU50: 500mm
Dimension 170L x 143Wx 63H mm
Included: 2m cable, microphone, windscreen
CS3EC
System cable for CS3 discussion systems
CS3EC002 - 2m cableCS3EC005 - 5m cableCS3EC010 - 10m cableCS3EC020 - 20m cableCS3EC050 - 50m cableCS3EC100 - 100m cable
CS3ETC
Splitter for CS3 cables
CS3ECT002 - 2m cable with T connectorCS3ECT005 - 5m cable with T connector
CS5-BU
Base Unit - digital controller for any size systems
Complete with all inputs and outputs needed for complex systems
Integrated infrared signal output
Free basic control software included
Included CS 5 PS12
NEW
INSTALLED AUDIO
INSTALLED AUDIO
» INSTALLED AUDIO / 2120 / INSTALLED AUDIO « ZONE PROCESSORS ZONE PROCESSORS
RETAIL & CAFE TURN-KEY SYSTEM
JBL CS COMMERICAL SERIES SYSTEMS
All the products in the JBL CS Series are application-engineered specifically for Retail and Hospitality. The CSMA mixer/amps offer unmatched ease of use, with a clean, front panel featuring only volume controls for each channel, master volume adjustment, adjustable bass and treble controls and a power switch. All the volume controls are surrounded by an illuminated ring, making them easy to see and operate in darkened environments.
CSR-V
Volume only
Wired with Cat 5 cable with un RJ-45 connectors up to 1000 feet (305 m)
Available in Black to order only
TV
CSPM1
1 zone paging microphone
1 PTT Button
WMS40MINI
Single or Dual systems available
Up to 30 hours AA battery
10mW
CSS8006BM
6.5” full-range driver
70 Hz – 20 kHz (-10dB)
120° conical
94 dB (1W/1m)
6W - 6, 3, 1.5W (100V taps)
200 x 66 (Dia x Depth mm)
175 (Open Back Cutout Dia mm)
Optional: CSS-BB6BM backcan
CSS1ST
5.25” 2 way monitor speaker
70 Hz – 20 kHz (-10dB)
120° x 120° coverage
86 dB (1W/1m)
10W, 5W (100V taps)
229 mm x 159 mm x 143 mm
Included Accessories: Wall-mounting brackets as-sembly with tilt-pan aiming
Optional: CSS-BB6BM backcan
NEW
CS SERIES APPLICATION EXAMPLE:
CHOOSE YOUR MIXER/AMPLIFIER: ADD YOUR CHOICE OF SPEAKER:
ADD A REMOTE VOLUME CONTROL: ADD A PAGING MICROPHONE: ADD A WIRELESS MICROPHONE:
More Speaker options Pg 32-33
Inputs Outputs Power 8Ω/100V 6W tap 3W 1.5W 10W 5W
CSMA180 4 1 80W 12 24 48 8 16
CSMA1120 4 1 120W 20 40 80 12 24
CSMA240 8 2 2 x 40W 2 x 6 2 x 12 2 x 24 2 x 4 2 x 8
CSMA280 8 2 2 x 80W 2 x 12 2 x 24 2 x 48 2 x 8 2 x 16
CSMA2120 8 2 2 x 120W 2 x 20 2 x 40 2 x 80 2 x 12 2 x 24
Up to how many CSS1ST will each model drive
Up to how many CSS8006M will each model drive
CSR-V CSR-V
MUSIC INPUT
PAGING MIC
WIRELESS MICSPEAKERS
CONTROL50PAK
4 x 2.5” low distortion 2 way satellite 1 x 8” high power subwoofer
32 Hz – 20 kHz (-10dB)
87 dB with 4 satellites (1W/1m)
80W, 40W, 20W (100V taps)
115 x 84 x 96 (H x W x D mm satellite) 356 x 391 x 203 (H x W x D mm subwoofer)
Wall bracket included
Available in Black or White
• Fanless, space-saving 1U design• Supports 70V and 100V distributed audio systems without
needing a separate transformer• Remote volume control capability using JBL CSR-V module
and standard Ehternet cable• Priority muting• Configurable output routing for 1 or 2 zones
INSTALLED AUDIO
INSTALLED AUDIO
» INSTALLED AUDIO / 2322 / INSTALLED AUDIO «
DBX ZONEPRO SERIES
Ex Stock Inputs Outputs Front Panel Control Mic Preamps S/PDIF Ethernet Mix Functionality ANC*
1260M 12 6 Y 6 Y Y Y Y
1260 Y 12 6 Y 2 Y Y Y
1261M Y 12 6 6 Y Y Y Y
1261 12 6 2 Y Y Y
640M 6 4 Y 4 Y Y Y
640 Y 6 4 Y 2
641M Y 6 4 4 Y Y Y
641 6 4 2
The ZonePRO™ family of Digital Zone Processors consists of eight devices with different functionality (see table below). Each device, with optional control from an extensive range of Zone Controllers, represents an inexpensive and quickly-deployed solution for a diverse range of commercial audio applications. The Configuration Wizard guides you through the step-by-step configuration process, ensuring that you go from requirements to solution in just a few mouse clicks.
*Ambient Noise Compensation
ZonePRO 640
ZonePRO 1260
DBX ZONEPRO CONTROLLERS
DIGITAL SIGNAL PROCESSORS
ZonePRO 1261M
ZonePRO 641MZONEPRO SERIES APPLICATION EXAMPLE:
ZC-1
Programmable Volume Control
For use with:260, 4800, Zonepro
ZC-7
Programmable Push-To-Talk Page Assignment
For use with:260, 4800, Zonepro
ZC-2
Programmable Volume Control & Mute
For use with:260, 4800, Zonepro
ZC-8
Programmable Volume and Source Select
For use with:260, 4800, Zonepro
ZC-3
Programmable Selection
For use with:260, 4800, Zonepro
ZC-9
8 Source Selection
For use with:4800, Zonepro 1260/1261 only
ZC-4
Program Selection
For use with:260, 4800, Zonepro
ZC-BOB
Allows “home-run” or parallel wiring
For use with:260, 4800, Zonepro
ZC-6
Programmable Volume Control
For use with:4800, Zonepro
ZC-FIRE
Fire Safety Interface
For use with:4800, ZoneproMOST
FLEXIBLE
MOSTFLEXIBLE
INSTALLED AUDIO
INSTALLED AUDIO
» INSTALLED AUDIO / 2524 / INSTALLED AUDIO «
NETWORK DIGITAL SIGNAL PROCESSORS
The Soundweb London BLU-100 series offers fixed configuration of analog inputs and outputs, configurable signal processing, AEC processing, and a high bandwidth, fault tolerant digital audio bus. All models feature open architecture which is fully configurable through HiQnet™ London Architect and Audio Architect. A rich palette of processing and logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment. These processors feature a low latency, fault tolerant digital audio bus of 48 channels which uses standard Cat5e cabling giving a distance of 100m between compatible devices. All processors feature 400MHz of signal processing power and offer RS-232. Fiber media converters can be used to increase the distance between devices to over 40km.
Soundweb London offers configurable I/O, configurable signal processing and a high bandwidth, low latency, fault tolerant digital audio bus of 256 channels. All models feature open architecture which is fully configurable through HiQnet™ London Architect and Audio Architect, Four Input / Output Card Slots, Analog and Digital Inputs and Outputs, AEC Inputs, Telephone Hybrid Card, 12 Control Inputs and 6 Logic Outputs for GPIO and a Soundweb Interface Kit for Third Party Control System Integration (Documentation).
BSS SOUNDWEB LONDON FIXED I/O DEVICE BSS SOUNDWEB LONDON CONFIGURABLE I/O
BLU-100
12x8 Signal Processor
48 Blu-Link digital channels
12 Analog Inputs (with 48v Phantom Power per Channel)
8 Analog Outputs
Bi-Directional Locate Functionality
12 Control Inputs and 6 Logic Outputs for GPIO Integration
Soundweb London Interface Kit for Third Party Control System Integration (Documentation)
BLU-101
Conferencing Processor with AEC
48 Blu-Link digital channels
12 Analog Inputs (with 48v Phantom Power per Channel)
8 Analog Outputs
12 Channels of AEC Processing with Auto Gain Control and Noise Cancel-lation
Bi-Directional Locate Functionality
12 Control Inputs and 6 Logic Outputs for GPIO Integration
Soundweb London Interface Kit for Third Party Control System Integration (Documentation)
BLU-102
Conferencing Processor with AEC and Telephone Hybrid
48 Blu-Link digital channels
10 Analog Inputs (with 48v Phantom Power per Channel)
8 Analog Outputs
RJ-11 Telephone Input/Output Port
8 Channels of AEC Processing with Auto Gain Control and Noise Cancel-lation
Bi-Directional Locate Functionality
12 Control Inputs and 6 Logic Outputs for GPIO Integration
Soundweb London Interface Kit for Third Party Control System Integration (Documentation)
BLU-BIB BLU-BOB
Break-in Box and Break-Out Box
BLU-BIB: 8 Analog Audio Inputs
BLU-BOB: 8 Analog Audio Outputs
DIP Switches for Channel Range Selection
BLU-BIB: Front Panel Input Gain, Phantom Power Control, Lockout, Stealth Mode
BLU-BOB: also available as 1/2 rack version (BLU-BOB1)
1U Rack-Mount Kit available sepa-rately for 1/2 rack versions
BLU-160
Signal Processor
256 Blu-Link digital channels - Ring Network
Up to 16 Analog, Digital, AEC Inputs
Up to 16 Analog, Digital Outputs
Up to 4 Telephone Connection
800MHz Signal Processing
BLU-805
Signal Processor
256 Blu-Link digital channels - Ring Network
128 AVB digital channels - Layer 2
Up to 16 Analog, Digital, AEC Inputs
Up to 16 Analog, Digital Outputs
Up to 4 Telephone Connection
800MHz Signal Processing
BLU-120
I/O Expander
256 Blu-Link digital channels - Ring Network
Up to 16 Analog, Digital, AEC Inputs
Up to 16 Analog, Digital Outputs
Up to 4 Telephone Connection
BLU-325
I/O Expander
256 Blu-Link digital channels - Ring Network
128 AVB digital channels - Layer 2
Up to 16 Analog, Digital, AEC Inputs
Up to 16 Analog, Digital Outputs
Up to 4 Telephone Connection
BLU-LINK PROCESSORS:
AVB & BLU-LINK PROCESSORS:NEW
Controllers and Card options Pg 27 Controllers and Card options Pg 27
BLU-100 & BLU-101
BLU-BOB2
BLU-102
BLU-BIB BLU-BOB1
INSTALLED AUDIO
INSTALLED AUDIO
» INSTALLED AUDIO / 2726 / INSTALLED AUDIO « ZONE PROCESSORS
BSS SOUNDWEB INPUT/OUTPUT CARD OPTIONS
Nos. of Ch Input Level
BLU-CARD-IN 4 Mic/Line/Phantom
BLU-CARD-OUT 4 AES/EBU / SPDIF
BLU-DIGITAL-IN 4 4 x additional dry inputs
BLU-DIGITAL-OUT 4 Line
BLU-CARD-AEC 4 AES/EBU / SPDIF
BLU-CARD-HYBRID 2 Mic/Line
BLU-HIF Telephone Headset Interface
ZONE PROCESSORS
NETWORK DIGITAL SIGNAL PROCESSORS
Power, flexibility and reliability for any scale of installed sound system. With a choice of ten different devices within the Soundweb London family, Soundweb London represents a truly flexible and scalable system. Whether you require the high bandwidth audio networking of a digital audio bus, CobraNet compatibility, DSP capability, input / output expansion or a specific mix of functionality, Soundweb London offers the building blocks of a tailor-made system. Teleconferencing is now possible with the new Hybrid card which enables London devices to interface with a standard POTS (aka PSTN or Analog PBX) telephone network.
BSS SOUNDWEB LONDON CONFIGURABLE I/O
BLU-10
BLU-8 BLU-3
BLU-6
SW9015 SW9012
Create custom control screens for the Soundweb range of processors
BSS SOUNDWEB LONDON CONTROLLERS
Official Soundweb London Level 1 or Level 2 training courses are available throughout the year in Auckland, Wellington and Christchurch.• Level 1 2 day Programming Fundamentals.
It is intended for users who are new to Soundweb London. This is a comprehensive course covering all you need to know for programming Soundweb London.
• Level 2 2 day Advanced Programming. This is a detailed look at some of the more advanced capabilities of Soundweb London. It is intended for Soundweb London users who already have a firm understanding of the Level 1 topics.
These InfoComm CTS accredited courses allow students to gain official certification with Soundweb London.
BSS SOUNDWEB CERTIFICATION TRAININGBLU-806
Signal Processor
256 Blu-Link digital channels - Ring network
128 Dante digital channels - Ethernet Layer 3
Up to 16 Analog, Digital, AEC Inputs
Up to 16 Analog, Digital Outputs
Up to 4 Telephone Connection
800MHz Signal Processing
BLU-800
Signal Processor
256 Blu-Link digital channels - Ring network
64 Cobranet digital channels - Standard Ethernet Layer 2
Up to 16 Analog, Digital, AEC Inputs
Up to 16 Analog, Digital Outputs
Up to 4 Telephone Connection
800MHz Signal Processing
BLU-326
I/O Expander
256 Blu-Link digital channels - Ring network
128 Dante digital channels - Ethernet Layer 3
Up to 16 Analog, Digital, AEC Inputs
Up to 16 Analog, Digital Outputs
Up to 4 Telephone Connection
BLU-320
I/O Expander
256 Blu-Link digital channels - Ring network
64 Cobranet digital channels - Standard Ethernet Layer 2
Up to 16 Analog, Digital, AEC Inputs
Up to 16 Analog, Digital Outputs
Up to 4 Telephone Connection
DANTE & BLU-LINK PROCESSOR:
COBRANET & BLU-LINK PROCESSOR:
NEW
HIQNET AUDIO ARCHITECT NEW
The original HiQnet vision of 2005 was to create a common control platform for all devices from microphone to speaker. Seven years later, the tally of devices in the HiQnet family exceeds 150 – from wireless microphone hubs, mixing consoles and signal processors, to amplifiers and powered loudspeakers. In creating the brand new HiQnet Audio Architect™, Harman has also incorporated the BSS Audio Soundweb London DSP system backbone within the core functionality of System Architect – combining the power of our proven open-architecture platform with AKG wireless microphones, dbx and Lexicon fixed-architecture processors, Crown amplifiers and JBL powered loudspeakers.
INSTALLED AUDIO
INSTALLED AUDIO
» INSTALLED AUDIO / 2928 / INSTALLED AUDIO « ZONE PROCESSORSZONE PROCESSORS
IDX NETWORKED AUDIO COMMUNICATION SYSTEMS
INFORMATION DELIVERY SYSTEMS
A COMPLETELY SCALABLE SYSTEM
Harman’s IDX system is a seamless audio and visual information delivery solution that provides a highly flexible and scalable way to communicate important information to those trying to navigate complex spaces such as today’s airports, transit stations and other public spaces.
Harman’s experience and expertise in audio, matched with Com-Net Software’s depth of experience and knowledge, bring to you a new and comprehensive approach to information delivery that has not been seen before. The system is designed and built to exceed professional audio standards, incorporating premium microphones, amplifiers and loudspeakers for the best audio quality available.
The IDX system is Powered by ECLIPSX® software, and utilizes a standard database server for straightforward information management. It supports a multilingual message library and features robust logging of captured events for auditing and live playback. The IDX solution is the most advanced dynamic message delivery engine on the market.
APPLICATIONS
• CASINOS
• CONFERENCE VENUES
• UNIVERSITIES
• HOTELS
• AIRPORTS
• TRANSIT
PDC-100
IDX Controller with server software preloaded
Dell™ Precision™ R5500 Rack Workstation, Windows 7
Centralized Management and Logging for IDX 100 Systems of up to: 12 Paging Stations14 Background Music Channels2 Pre-Recorded Message Channels
Wizard-Driven Configuration of PDC-100 by IDX 100 Designer (Client) Software
PDP-DSP
IDX 100 Public Address Processor
8 Analog Inputs (with Phantom Power per Channel), 8 Analog OUtputs
256 Channel, Low Latency, Fault Tolerant Digital Audio Bus
Wizard-Driven Configuration of PDC-100 by IDX 100 Designer (Client) Software
Pre-Configured Signal Path
12 Control Inputs and 6 Logic Outputs for GPIO Integration
In IDX 100 System Up to 96 Output Zones Using 2 PDP-DSP Devices
PDP-BOB
IDX 100 Ouput Expander "Break Out Box"
8 Analog Audio Outputs
256 Channel, Low Latency, Fault Tolerant Digital Audio Bus
DIP Switches for Channel Range Selection
Standard Terminal Block Connectors for Analog Audio Connections and Power Connection
In IDX 100 System Up to 96 Output Zones Using 12 PDP-BOB Devices
CT16S
IDX 100 Amplifier switcher with monitoring and control by PDC-100
16 Primary & 16 Backup Amplifier Inputs; 16 Speaker Outputs
I8:1 or 1:1 Backup Operation
Automatic Switching of Failed Primary Amplifier Channel to Idle Backup Amplifier Channel
Hi-Z (70V / 100V) Capability; 2A of Continuous Current or 1000W per Channel of Audio Signal Capability
DT-715
Paging Station Base Unit
Sends Pages to 96 Zones (max)
Audio and Control via CobraNet™
Paging Microphone, Monitor Speaker, PTT button, 15 x User Definable Buttons
Powered via PoE or a DC Power Adapter (included)
DTE-710
Paging Station Extension Unit (pictured 1 x DT-715 + DTE-710)
10 User-Definable Function Buttons
Connect up to 12 Units (Daisy Chain) to a DT-715
NEW
INSTALLED AUDIO
INSTALLED AUDIO
» INSTALLED AUDIO / 3130 / INSTALLED AUDIO « AMPLIFIERS AMPLIFIERS
CROWN CDi SERIES
• Low impedance and High impedance (70V)• Accurate, uncolored sound with very low distortion for the
best in music and voice reproduction• Onboard DSP - crossovers, EQ filters, delay & limiting• USB for setup & configuration• Speaker presets
CROWN XLS DRIVECORE SERIES CROWN DCi DRIVECORE SERIES
PROFESSIONAL AMPLIFIERS
(1kHz) 4Ω Dual/ch 8Ω Dual/ch 70V Dual/ch*
CDi1000 500W 275W 500W
CDi2000 800W 475W 800W
CDi4000 1200W 650W 1000W
• High Performance, Class D, weighing less than 5 kgs.• Integrated PureBand™ Crossover System for better
performance and control • Peakx™ Limiters provide maximum output while
protecting your speakers • XLR, 1/4”, RCA inputs provide outstanding flexibility • Efficient forced-air fans prevent excessive thermal buildup
• True Rack Density – Power points of 300W or 600W in 2/4/8 channel configurations. All in a 2 Rack Unit form factor provides flexibility in design tools.
• Minimum Guaranteed Power Ratings – DCi Amplifiers are guaranteed to deliver at least the rated power in the specifications over a longer period of time than any other competing amplifier.
• Constant Voltage 70V or 100V output is available on a channel by channel basis. Bridging amplifier channels is not required.
• "N" versions offer Audio Architect and System Architect supported amplifier.
• TCP/IP based protocol in HiQnet for Network Monitoring and Control. Allows amplifier to coexist on a standard network back bone.
(1kHz) 2Ω Dual/ch 4Ω Dual/ch 8Ω Dual/ch
XLS1000 550W 350W 215W
XLS1500 775W 525W 300W
XLS2000 1050W 650W 375W
XLS2500 1200W 775W 440W
Channels 2Ω 4Ω 8Ω 70V Vms 100V Vms
DCI2300 (N) 2 150W 300W 300W 300W 300W
DCI2600 (N) 2 300W 600W 600W 600W 600W
DCI4300 (N) 4 150W 300W 300W 300W 300W
DCI4600 (N) 4 300W 600W 600W 600W 600W
DCI8300 (N) 8 150W 300W 300W 300W 300W
DCI8600 (N) 8 300W 600W 600W 600W 600W
* 140V Bridge-Mono
CROWN COMTECH DRIVECORE SERIES
• Signal-to-Noise of better than 110dB • Total Harmonic Distortion below 0.05% across the full
audio bandwidth delivering studio-grade sound• For installations that require premium sound quality,
multi-channel configurations, compact dimensions, and quite often zero ambient fan noise.
• Typical applications include boardrooms, video and teleconferencing, VIP suites in stadiums and arenas, and upscale restaurants and retail outlets
(1kHz) 8Ω Dual/ch 100V
CT475 75W optional XFMR4 transformer kit
CT875 75W optional XFMR8 transformer kit
CT4150 125W optional XFMR4 transformer kit
CT8150 125W optional XFMR8 transformer kit
The new DriveCore install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound ap-plications.
Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in profes-sional and commercial power amplifier technology.
The new DCi Network amplifier is a complete line of high performance installation amplifiers that include network monitoring and control, BLU-Link digital audio transport, and Digital Signal Processing (DSP).
Order "N" versions for Network Control and Blu-link
NEWJBL CSA DRIVECORE SERIES
• Drivecore amplifiers featuring single or dual channels models
• 1U and 1/2 rack wide • Capable of 8Ω and 100V• Works best with JBL CS Series turn-key products (refer
page 20-21)
(1kHz) 8Ω/ch 100V
CSA140 40W 40W
CSA180 80W 80W
CSA1120 120W 120W
CSA240 2 X 40W 2 X 40W
CSA280 2 X 80W 2 X 80W
CSA2120 2 X 120W 2 X 120W
INSTALLED AUDIO
INSTALLED AUDIO
» INSTALLED AUDIO / 3332 / INSTALLED AUDIO «
JBL 8100 SERIESJBL CSS SERIES
High-fidelity performance at a cost-effective price point, the 8100 Series is an easy to install loudspeaker solution. Ideal for a wide variety of commercial sound applications from restaurant and retail to professional offices and reception areas.
JBL’s Commercial Series Ceiling Speakers provide excellent performance for paging and background music applications. High sensitivity across the product line provides maximum sound level, even at low tap settings.
JBL CONTROL 10 SERIES
The Control 12C/T, Control 14C/T and Control 16C/T are ideal for applications where excellent sound quality is needed for medium-volume music playback and paging, such as in music cafes, retail stores, airports, reception / waiting rooms, lounges, courtrooms, convention centers, hotels, educational facilities and more. Control 10 Series models feature wide bandwidth, wide coverage, and combined 70V/100V and 8-ohm operation in each speaker. Available in either white (or black to order).
IN-CEILING LOUDSPEAKERS
8128
8” dualcone full-range driver
50 Hz – 16 kHz (-10dB)
90° conical
97 dB (1W/1m)
25W / 8Ω (Transformer bypass)
6, 3, 1.5W (100V taps)
287 x 105 (Dia x Depth mm)
206 (Cutout Dia mm)
8124
4” full-range driver
60 Hz – 18 kHz (-10dB)
130° conical
93 dB (1W/1m)
20W / 8Ω (Transformer bypass)
6, 3, 1.5W (100V taps)
206 x 89 (Dia x Depth mm)
175 (Cutout Dia mm)
CONTROL12CT
3” full range driver
68 Hz – 17 kHz (-10dB)
130° conical
84 dB (1W/1m)
40W Program / 8Ω
15, 7.5, 3.8W 100V taps
196 x 138 (Dia x Depth mm)
170 (Cutout Dia mm)
Grille, backcan and tie-rails included
CONTROL14CT
4” Coaxial 2 way
74 Hz – 20 kHz (-10dB)
120° conical
87 dB (1W/1m)
60W Program / 8Ω
25, 12.5, 6.3W 100V taps
196 x 181 (Dia x Depth mm)
170 (Cutout Dia mm)
Grille, backcan and tie-rails included
CONTROL16CT
6.5” Coaxial 2 way
62Hz – 20 kHz (-10dB)
110° conical
91 dB (1W/1m)
100W Program / 8Ω
30, 15, 7.5W 100V taps
253 x 225 (Dia x Depth mm)
170 (Cutout Dia mm)
Grille, backcan and tie-rails included
IN-CEILING / IN-WALL LOUDSPEAKERS IN-CEILING LOUDSPEAKERS
CSS8006BM
6.5” full-range driver
70 Hz – 20 kHz (-10dB)
120° conical
94 dB (1W/1m)
6W
6, 3, 1.5W (100V taps)
200 x 66 (Dia x Depth mm)
175 (Open Back Cutout Dia mm)
Optional: CSS-BB6BM backcan
NEW
IN-WALL LOUDSPEAKERS
JBL CONTROL CONTRACTOR IN-WALL SERIES
Control 126W and 128W are premium in-wall loudspeakers designed for applications where top performance from a loudspeaker with minimal visual impact is required. *The high-performance polymer-coated aluminum woofer, aimable pure titanium dome tweeter and sophisticated crossover network provide natural sound, even coverage and smooth, wide frequency response.
CONTROL126W CONTROL126WT
6.5” 2 way speaker
38 Hz – 20 kHz (-10dB)
100W program / 8Ω (126W)
88 dB (1W/1m speech mode)
30W, 15W, 7.5W (100V taps)
280 x 215 x 105 (H x W x D mm)
Cutout: 246 x 181 (H x W mm)
Cutout template & paint shield included
CONTROL128W CONTROL128WT
8” 2 way speaker
30 Hz – 20 kHz (-10dB)
100W program / 8Ω (126W)
90 dB (1W/1m speech mode)
50W, 25W, 12.5W (100V taps)
334 x 257 x 110 (H x W x D mm)
Cutout: 300 x 225 (H x W mm)
Cutout template & paint shield included
NEW NEW
IN-CEILING LOUDSPEAKERS
JBL CONTROL MICRO SERIES
The Control 24C Micro is a compact in-ceiling speaker, providing full, high quality sound for background music and music-plus-paging systems with shallow depth of just over 100mm.
CONTROL24C-M
4.5” 2 way (shallow backcan)
85 Hz – 25 kHz (-10dB)
150° conical
86 dB (1W/1m)
30W Program / 8Ω
195 x 106 (Dia x Depth mm)
167 (Cutout Dia mm)
Grille, backcan and tie-rails included
CONTROL24CT-M
4.5” 2 way (shallow backcan)
85 Hz – 25 kHz (-10dB)
150° conical
86 dB (1W/1m)
9, 4, 2, 1W 100V taps
195 x 106 (Dia x Depth mm)
167 (Cutout Dia mm)
Grille, backcan and tie-rails included
LOW PROFILE GREAT FOR
SHALLOW DEPTHINSTALLS
INSTALLED AUDIO
INSTALLED AUDIO
» INSTALLED AUDIO / 3534 / INSTALLED AUDIO «
JBL CONTROL 40 SERIES
HIGH POWER IN-CEILING LOUDSPEAKERS
CONTROL47C-T
6.5” Coaxial 2 way With extended bass
55 Hz – 20 kHz (-10dB)
120° conical
150W program / 8Ω (bypass)
91 dB (1W/1m)
60, 30, 15W (100V taps)
305 x 259 (Dia x Depth mm)
282 (Cutout Dia mm)
Grille, backcan and tie-rails included
CONTROL47LP
6.5” Coaxial 2 way Low profile
68 Hz – 20 kHz (-10dB)
120° conical
150W program / 8Ω (bypass)
91 dB (1W/1m)
60, 30, 15W (100V taps)
305 x 142 (Dia x Depth mm)
282 (Cutout Dia mm)
Grille, backcan and tie-rails included
CONTROL47HC
6.5” Coaxial 2 way for High ceilings
55 Hz – 17 kHz (-10dB)
75° conical
150W program / 8Ω (bypass)
93 dB (1W/1m)
60, 30, 15W (100V taps)
332 x 351 (Dia x Depth mm)
307 (Cutout Dia mm)
Grille, backcan and tie-rails included
CONTROL42C
2.5” Compact Satellite - use with Control 40CST & 50ST
140 Hz – 20 kHz (-10dB)
160° conical
30W program / 16Ω
82 dB (1W/1m)
127 x 94 (Dia x Depth mm)
104 (Cutout Dia mm)
Grille, backcan and C-ring supports included
CONTROL4OCST
8” Subwoofer with crossover
32 Hz – 300 Hz (-10dB)
200W / 8Ω (bypass)
80, 40, 20W (100V taps)
95 dB (1W/1m near corner)
332 x 338 (Dia x Depth mm)
307 (Cutout Dia mm)
Grille, backcan and C-ring supports included
CCONTROL226CT
6.5” Coaxial 2 way
47 Hz – 19 kHz (-10dB)
120° conical
150W program / 8Ω (bypass)
95 dB (1W/1m)
68, 34, 17W (100V taps)
330 x 246 (Dia x Depth mm)
307 (Cutout Dia mm)
Grille, backcan and tie-rails included
CONTROL312CS
12” Subwoofer
30 Hz – 4.5 kHz
400W / 8Ω
93 dB (1W/1m)
366 x 160 (Dia x D mm)
378 (Backcan Cutout Dia mm)
Backcan MTC-300BB12 & Grille MTC-SG12 sold separately
JBL CONTROL 200 & 300 SERIES
Control 300 are designed for larger systems requiring high output, with 8” and 12” low-frequency drivers, high-power compression drivers, and higher sound output capabilities. Whereas the current Control Contractor ceiling speaker models are of an “integrated” design (with pre-attached backcans) these large-format speakers are sold separately from the backcans, allowing for pre-installation of the backcans.
CONTROL328C CONTROL328CT
8” Coaxial 2 way
45 Hz – 18 kHz (-10dB)
120° conical
250W / 8Ω (328C)
93 dB (1W/1m)
60, 30, 15W (328CT 100V taps)
305 x 160 (328C Dia x D mm)305 x 218 (328CT Dia x D mm)
310 (Backcan Cutout Dia mm)
Backcan MTC-300BB8 & Grille MTC-RG8 sold separately
CONTROL321C CONTROL321CT
12” Coaxial 2 way
34 Hz – 18 kHz (-10dB)
90° conical
250W / 8Ω (321C)
94 dB (1W/1m)
60, 30, 15W (321CT 100V taps)
366 x 223 (321C Dia x D mm)366 x 240 (321CT Dia x D mm)
378 (Backcan Cutout Dia mm)
Backcan MTC-300BB12 & Grille MTC-SG12 sold separately
CONTROL322C CONTROL322CT
High Output 12” 2 way
32 Hz – 20 kHz (-10dB)
90° conical
400W / 8Ω (322C)
95 dB (1W/1m)
100, 50, 25W (322CT 100V taps)
366 x 223 (322C Dia x D mm)366 x 240 (322CT Dia x D mm)
378 (Backcan Cutout Dia mm)
Backcan MTC-300BB12 & Grille MTC-SG12 sold separately
IN-CEILING LOUDSPEAKERS
The Control 40 Series Ceiling Speakers are designed to work perfectly in environments that require a premium, in-ceiling speaker with an extremely wide bandwidth and consistent coverage.
IN-CEILING LOUDSPEAKERS
2 x Satellites 1 x Subwoofer
111 sq. m at 3 m ceiling height
185 sq. m at 3.6 m ceiling height
325 sq. m at 4.5 m ceiling height
4 x Satellites 1 x Subwoofer
222 sq. m at 3 m ceiling height
371 sq. m at 3.6 m ceiling height
650 sq. m at 4.5 m ceiling height
SUBWOOFER/SATELLITE COVERAGE
Approximate coverage (up to):
MTC-300BB12
MTC-SG12
MTC-300BB8
MTC-RG8
Refer to page 38 for "Mix n Match" sub-woofer and satellite options.
INSTALLED AUDIO
INSTALLED AUDIO
» INSTALLED AUDIO / 3736 / INSTALLED AUDIO «
SURFACE MOUNT LOUDSPEAKERSSURFACE MOUNT LOUDSPEAKERS
JBL CONTROL CONTRACTOR SERIES JBL CONTROL CONTRACTOR SERIES BRACKETS
CONTROL23 CONTROL23T
3.5” 2 way compact speaker
23: 85 Hz – 22 kHz (-10dB) 23T: 100 Hz – 21 kHz (-10dB)
50W program / 8Ω (23)
86 dB (1W/1m speech mode)
10W (23T 100V taps)
193 x 140 x 111 (H x W x D mm)
90° X 90° horn
Invisiball wall bracket included
Available in Black or White
CONTROL25AV
5.25” 2 way in/outdoor monitor
70 Hz – 23 kHz (-10dB)
200W program / 8Ω
87 dB (1W/1m speech mode)
60, 30, 15W (100V taps)
236 x 186 x 159 (H x W x D mm)
100° X 100° horn
Invisiball wall bracket included
Available in Black or White
CONTROL28 CONTROL28T
8” 2 way high output speaker
28: 60 Hz – 16 kHz (-10dB)28T: 55 Hz – 15 kHz (-10dB)
175W program / 8Ω (28)
92 dB (1W/1m speech mode)
60, 30, 15W (28T 100V taps)
380 x 280 x 220 (H x W x Dmm)
90° X 90° horn
Invisiball wall bracket included
Available in Black or White
CONTROLSB-2
10” Stereo Subwoofer
38 Hz – 160 kHz (-10dB)
170W program / 8Ω x 2
100 dB (1W/1m speech mode)
394 x 585 x 343 (H x W x Dmm)
Corner/Wall/Ceiling brackets optional
CONTROLSB-210
2 x 10” high power subwoofer
42 Hz – 200 kHz (-10dB)
400W program / 8Ω x 2
102 dB (1W/1m speech mode)
355 x 590 x 570 (H x W x D mm)
4 x Floor standing feet includedU Bracket optional
CONTROL29AV
8” 2 way in/outdoor monitor
37 Hz – 18 kHz (-10dB)
300W program / 8Ω
90 dB (1W/1m speech mode)
110, 55, 28W (100V taps)
520 x 306 x 277 (H x W x Dmm)
110° X 85° rotatable horn
Invisiball wall bracket included
Available in Black or White
CONTROL30
10” 3 way in/outdoor speaker
38 Hz – 17 kHz (-10dB)
500W program / 4Ω
93 dB (1W/1m speech mode)
150, 75, 38W (100V taps)
593 x 372 x 345 (H x W x Dmm)
120° X 110° horn
Invisiball wall bracket included
Available in Black or White
SURFACE MOUNT LOUDSPEAKERSSURFACE MOUNT LOUDSPEAKERS
CONTROL25 CONTROL25T
5.25” 2 way compact speaker
25: 80 Hz – 16 kHz (-10dB)25T: 80 Hz – 15 kHz (-10dB)
150W program / 8Ω (25)
88 dB (1W/1m speech mode)
30, 15, 7.5W (25T 100V taps)
236 x 188 x 149 (H x W x D mm)
90° X 90° horn
Invisiball wall bracket included
Available in Black or White
Ceiling Bracket Verticle ArrayBracket
Horizontal ArrayU Bracket
Simply select the JBL Control Contractor loudspeaker appropriate for the architectural, form factor and sonic requirements. The resulting sound system will always deliver on its promise of Performance, Reliability and Value. All include paintable weather resistant enclosures.
JBL Control Speakers installed Les Mills Britomart
INVISIBALL® MOUNTING SYSTEM
WEATHERMAX™ GRILLES
JBL’s exclusive, patented InvisiBall® Mounting System (most models) allows for quick, easy, theft-resistant installation with the built-in mount secured by a few turns of a standard hex wrench.
WeatherMax™ Grilles are available for Control23/25/28 Speakers. Stainless Steel with 3-Layer Foam. Provides IP-x5 Grille Rating.
Order MTC-##WMG.
MTC-23CM MTC-28-25CMMTC-29CM
The Ceiling Mount allows installation of the enclosure to sturdy ceiling structures by utilising the internal InvisiBall mechanism.
Available in Black and White
MTC-25V
Vertical-Array Wall Bracket for Three Control 25 Speakers.
Available in Black and White
MTC-29UBMTC-30UBMTC-210UB
U Bracket that attaches to both ends of the speaker allowing easy installations on walls and ceilings.
Available in Black and White
MTC-25-23HMTC-28H
Horizontal-Array Bracket for Two Control 28s, 60 degree Splay, Three Brackets Connect to Form Suspendable Assembly for Six Speakers, 360 degree Coverage.
Available in Black and White
MTC-SB2CMTC-SB2W
Brackets for Suspending Control SB-2 from a Ceiling or Wall
Available in Black only
Ceiling Bracket
Wall Bracket
INSTALLED AUDIO
INSTALLED AUDIO
» INSTALLED AUDIO / 3938 / INSTALLED AUDIO «
JBL CONTROL 60 SERIES
JBL Control Contractor 60 Series Pendant loudspeakers bring renowned JBL sound and outstanding coverage to rooms andvenues with open architecture or high-ceilings, while providing superior voice and musical clarity for rooms with difficult acoustics. Included, easy-to-install hanging hardware features redundant suspension cables and UL listed adjustable-height hangers. Four Control 62P’s can be driven from a wallmounted Control 50ST (pg 38) or in-ceiling 40CS/T (pg 34) subwoofer to form a full-range passively crossed-over subwoofer/satellite system.
PENDANT LOUDSPEAKERS
CONTROL62P
For speech and mid-high music applications
2” ultra-compact satellite
150 Hz – 20 kHz (-10dB)
140° Coverage
50W program / 16 Ω
85 dB (4.0V, 1W Full Space)
121 x 128 (H x D mm)141 (H mm top suspension bkt)
2 x Suspension cable systems included (main & safety)
Available in Black or White, paintable.
CONTROL65P-T
Consistant wide coverage with JBL's exclusive RBI technology
5.25” compact full-range
55 Hz – 20 kHz (-10dB)
120° Coverage
75W program / 8 Ω
100V: 60W, 30W, 15W
86 dB (4.0V, 1W Full Space)
259 x 234 (H x D mm)279 (H mm top suspension bkt)
2 x Suspension cable systems included (main & safety)
Available in Black or White, paintable.
CONTROL67P-T
Extra large RBI for outstanding pattern control (ie fewer speakers)
6.5” extended full-range
58 Hz – 18 kHz (-10dB)
120° Coverage
75W program / 8 Ω
100V: 60W, 30W, 15W
90 dB (4.0V, 1W Full Space)
330 x 312 (H x D mm)350 (H mm top suspension bkt)
2 x Suspension cable systems included (main & safety)
Available in Black or White, paintable.
CONTROL67HC-T
Controlled coverage for high-ceiling and reverberant locations
6.5” narrow full-range
58 Hz – 18 kHz (-10dB)
120° Coverage
75W program / 8 Ω
100V: 60W, 30W, 15W
90 dB (4.0V, 1W Full Space)
330 x 312 (H x D mm)350 (H mm top suspension bkt)
2 x Suspension cable systems included (main & safety)
Available in Black or White, paintable.
JBL CONTROL 50 SERIES
The Control 50 Series subwoofer-satellite loudspeaker system provides high fidelity sound in restaurants, retail stores, music cafes, health clubs, theme bars, leisure venues, or any location where full-range high fidelity foreground/background music is required from surface mount system. The Control Contractor 50’s stylish appearance, easy mounting, and compatibility with JBL’s Control 40 Series (see page 34) in-ceiling models, allows matching to the mounting, aesthetic, and performance requirements of any application. Easy to use and install 200W subwoofer-satellite systems Control50Pak's are perfect for small restaurants and cafes.
SUBWOOFER/SATELLITE SPEAKER SYSTEMS
CONTROL52
2.5” low distortion 2 way satellite
140 Hz – 20 kHz (-10dB)
150° Omnidirectional
50W program / 16Ω
85 dB (1W/1m)
115 x 84 x 96 (H x W x D mm)
Wall bracket included
Available in Black or White
CONTROL50ST
8” high power subwoofer
32 Hz – 200 kHz (-10dB)
80, 40, 20W (100V taps)
150W program / 8Ω (bypass)
95 dB (1W/1m near corner)
356 x 391 x 203 (H x W x D mm)
Wall bracket included
Available in Black or White
SURFACE MOUNT LOUDSPEAKERS SURFACE MOUNT LOUDSPEAKERS
NEW
CONTROL SERIES SATELLITE AND SUBWOOFER SYSTEMS - MIX ‘N’ MATCH
The Control52, control 42C and Control62P speakers all have similar sound character, similar frequency response, similar sensitivity, similar directivity, and similar impedance. Therefore, you can inter-mix Control 62P, Control 52 and Control 42C speakers, even within the same sub-woofer-satellite system. This is useful if you have a venue that requires different form factors of satellite speakers, such as a low-ceiling sec-tion and an open-architecture ceiling section. You can also choose your subwoofer type, in-ceiling Control40ST or surface mount Control50ST.
or
MIX ‘N’ MATCH SATELLITES:
MIX ‘N’ MATCH SUBWOOFERS:
CONTROL50ST CONTROL40CS-T
CONTROL62P CONTROL52 CONTROL42C
or or 2 x Satellites 1 x Subwoofer
111 sq. m at 3 m ceiling height
185 sq. m at 3.6 m ceiling height
325 sq. m at 4.5 m ceiling height
APPROX COVERAGE (UP TO):
4 x Satellites 1 x Subwoofer
222 sq. m at 3 m ceiling height
371 sq. m at 3.6 m ceiling height
650 sq. m at 4.5 m ceiling height
JBL Control67HC-T speakers installed at The Grille By Sean Connelly, Skycity, Auckland
GREAT FOR CAFES AND SMALL RETAIL
SPACES
CONTROL50PAK
4 x Control52 2.5” low distortion 2 way satellite 1 x Control50ST 8” high power subwoofer
32 Hz – 20 kHz (-10dB)
80W, 40W, 20W (100V taps)
200W program / 8Ω (bypass)
87 dB with 4 satellites (1W/1m)
Wall bracket included
Available in Black or White
INSTALLED AUDIO
INSTALLED AUDIO
» INSTALLED AUDIO / 4140 / INSTALLED AUDIO «
SOUND REINFORCEMENT LOUDSPEAKERS
SURFACE MOUNT LOUDSPEAKERSSURFACE MOUNT LOUDSPEAKERS
JBL PRX400 SERIES LOUDSPEAKERS
PRX415M
15” 2 way loudspeaker
55 Hz – 19 kHz (-10dB monitor)
600W (Program)
98 dB (1w@1m)
90° X 50° nominal
2 x NL2 1/4" combo inputs
650 x 429 x 457 (H x W x Dmm)
Dual-angle pole socket, 12 x M10 suspension points
Optional sub pole SS4BK-24
PRX412M
12” 2 way loudspeaker
50 Hz – 19 kHz (-10dB)
600W (Program)
95 dB (1w@1m)
90° X 50° nominal
2 x NL2 1/4" combo inputs
577 x 353 x 400 (H x W x Dmm)
Dual-angle pole socket, 12 x M10 suspension points
Optional sub pole SS4BK-24
PRX400 passive speakers were designed to provide the sensitivity, frequency response and power handling needed for almost any professional audio environment while still being reasonably priced. All full range models utilize twelve M10 suspension points for safe deployment in light duty installations.
PRX418S
15” 2 way powered loudspeaker
350 Hz – 250 Hz (-10dB)
1600W (Program)
95 dB (1w@1m)
2 x NL2, 2 x 1/4" TS inputs
678 x 356 x 615 (H x W x Dmm)
Optional sub pole SS4BK-24
PRX425
2 x 15” 2 way loudspeaker
48 Hz – 19 kHz (-10dB)
1200W (Program)
100 dB (1w@1m)
90° X 50° nominal
2 x NL2 1/4" combo inputs
1044 x 429 x 521 (H x W x Dmm)
36mm dual-angle pole socket, 8 x M10 suspension points and 1 x M10 pull back point
JBL CBT SERIES
SURFACE MOUNT COLUMN LOUDSPEAKERS
Designed for venues that would typically use larger point-and-shoot speakers, the CBT models offer superior intelligibility in challenging acoustic environments, with a level of user-friendliness that virtually eliminates the challenges of delivering great sound. All models feature an outdoor rating of IP-54.
CBT70J
4x 5” J shaped coaxial line array
60 Hz – 20 kHz (-10dB)
Narrow 25°/ Broad 45°
500W / 8Ω
98 dB (1W/1m narrow speech)
695 x 170 x 237 (H x W x D mm)
10 x M6 insert points, wall bracket included
Available in Black or White
CBT70JE
4x 5” extension line array for use with CBT70J
System: 45 Hz – 20 kHz (-10dB)
System: 1000W / 4Ω
System: 98 dB (1W/1m speech)
695 x 170 x 237 (H x W x D mm)
10 x M6 insert points, combining bracket included
Available in Black or White
CBT50LA
8 x 2” line array column
80 Hz – 20 kHz (-10dB)
Vertical 20°/ Horizontal 150°
150W program / 8Ω (switch)
93 dB (1W/1m speech mode)
60, 30, 15W (100V taps)
528 x 99 x 153 (H x W x D mm)
10 x M6 insert points, wall bracket included
Available in Black or White
CBT100LA
16 x 2” full range column
80 Hz – 20 kHz (-10dB)
Narrow 150°/ Broad 40°/ H 150°
325W / 8Ω (switch)
96 dB (1W/1m speech mode)
100, 50, 30W (100V taps)
1000 x 99 x 153 (H x W x D mm)
18 x M6 insert points, wall bracket included
Available in Black or White
CBT200LA
32 x 2” line array column
80 Hz – 20 kHz (-10dB)
Narrow 15°/ Broad 30°/ H 150°Asymmetrical 22° (J type)*
400W / 8Ω (4Ω thru mode)
96 dB (1W/1m speech mode)
120, 60, 30W (100V taps 8Ω)
2000 x 98.5 x 153 (H x W x D mm)
36 x M6 insert points (per, Swivel (pan) / tilt wall bracket, Coupler plate included
MTC-CBT-FM1 flush-mount low-profile wall bracket optional
Available in Black or White
CBT 70J & CBT 70JE:
•PerfectforSchoolHalls,Lecture Theatres, churches, for both music and speech.•IncludeCBT70JEifmorebass and/or pattern control is required
CBT APPLICATIONS
CBT 50LA:
•Audiosupportofvideomonitors•Retailstores,conferencerooms and general fill applica-tions•Architecturalspaceswhereapoint-and-shoot speaker may be too visually obtrusive.
JBL CBT70J and CBT70JE
installed at the Metropolitan
Cathedral of the Sacred Heart,
Wellington
CBT 100LA:
•Lecturehalls,conferencecentres, cathedrals, architectural spaces as speaker can be recessed into the wall.•Highpatterncontrol.
CBT 200LA:
•Transit centers, conference centers, cathedrals, multipurpose spaces,gymnasiums, theme parks etc•VeryHighpatterncontrol.
NEW
NEW
WORKS BEST WITH CROWN XLS AND
XTI 2 AMPS
EXCELLENT FOR HIGHLY REVERBERENT
SPACES
INSTALLED AUDIO
INSTALLED AUDIO
» INSTALLED AUDIO / 4342 / INSTALLED AUDIO «
HIGH PERFORMANCE LOUDSPEAKERS
JBL AE SERIES LOUDSPEAKERS
The AE Series is a complete line of permanent installation loudspeakers and subwoofers, containing the performance and features that meet the needs of contractors and consultants alike. U Brackets and Planner Array Frames available for all models. All AE Series subwoofers are for ground-stacked or suspended applications in stand-alone arrays or in combination with other AE Series products. Below is a selection of the more popular models however the AE Series contains a total of 32 speaker options.
The AE Series is a complete line of permanent installation loudspeakers and subwoofer, containing the performance and features that meet the needs of contractors and consultants alike. U Brackets and Planner Array Frames available for all models. All models are IP-x3 rated with higher weather proofing options available to order.
JBL AE COMPACT SERIES LOUDSPEAKERS
AM5212
12” 2 way full range loudspeaker
37 Hz – 20 kHz (-10dB)
60° x 40°, 60° x 60°90° x 50°, 100° x 100° or 120° x 60° all rotatable
300W / 8Ω
96 dB (1W/1m passive mode)
711 x 369 x 458 (H x W x D mm)
15 x M10 insert points
MTU-3 U bracket optional
AM5215
15” 2 way full range loudspeaker
35 Hz – 20 kHz (-10dB)
60° x 40°, 60° x 60°90° x 50° or 120° x 60° all rotatable
350W / 8Ω
98 dB (1W/1m passive mode)
781 x 420 x 503 (H x W x Dmm)
15 x M10 insert points
MTU-1 U bracket optional
AM7212
12” 2 way full range loudspeaker
36 Hz – 20 kHz (-10dB)
60° x 40°, 60° x 60°90° x 50°, 100° x 100° or 120° x 60° all rotatable
700W / 8Ω
95 dB (1W/1m passive mode)
711 x 369 x 458 (H x W x Dmm)
15 x M10 fly points
MTU-3 U bracket optional
AM7215
15” 2 way full range loudspeaker
34 Hz – 20 kHz (-10dB)
60° x 40°, 60° x 60°90° x 50° or 120° x 60° all rotatable
750W program / 8Ω
96 dB (1W/1m passive mode)
781 x 420 x 503 (H x W x Dmm)
15 x M10 fly points
MTU-1 U bracket optional
ASB6112
12” high power subwoofer
35 Hz – 1 kHz (-10dB)
700W / 8Ω
96 dB (1W/1m passive mode)
406 x 369 x 483 (H x W x Dmm)
16 x M10 fly points
ASB6115 and ASB6125
15” high power subwoofer2 x 15” high power subwoofer
32 Hz – 1 kHz (-10dB)
675W / 8Ω (ASB6115)1350W / 4Ω parallel (ASB6215)
97 dB & 100 dB (1W/1m)
483 x 419 x 597 (H x W x Dmm)965 x 419 x 597 (H x W x Dmm)
16 x M10 fly points
ASB7118 and ASB7128
18” high power subwoofer2 x 18” high power subwoofer
ASB7118: 22 Hz – 1 kHz (-10dB)ASB7128: 20 Hz – 1 kHz (-10dB)
1200W / 8Ω (ASB7118)2400W / 4Ω parallel (ASB7128)
96 dB & 99 dB (1W/1m)
546 x 560 x 815 (H x W x Dmm)1092 x 560 x 815 (H x W x Dmm)
16 x M10 fly points
AC15 & AC25
5.25” 2 way loudspeaker & 2 x 5.25” 2 way loudspeaker
80 Hz – 20 kHz (-10dB)
300W & 450W program / 16Ω
86 & 91 dB (1W/1m)
90° X 90° coverage
241 x 151 x 178 (H x W x Dmm)378 x 151 x 178 (H x W x Dmm)
4 x M8 fly points, (2 x AC15) (4 x AC25) M6 for stand adapter
AC15: MTU-15 U Bracket optionalAC25: MTU-25 U Bracket optional
AC16 & AC26
6.5” 2 way loudspeaker &2 x 6.5” 2 way loudspeaker
55 Hz – 20 kHz (-10dB)
300W / 16Ω & 600W / 8Ω
90 dB & 92 dB (1W/1m)
90° X 90° coverage
381 x 200 x 226 (H x W x Dmm)540 x 200 x 226 (H x W x Dmm)
5 x M8 fly points, 4 x M6 for stand adapter
AC16: MTU-16 U Bracket optionalAC26: MTU-26 U Bracket optional
AC18 & AC28
8” 2 way loudspeaker &2 x 8” 2 way loudspeaker
AC18: 52 Hz – 20 kHz (-10dB)AC28: 53 Hz – 20 kHz (-10dB)
500W and 750W / 8Ω
92 dB & 94 dB (1W/1m)
90° X 50° or 120° X 60°
470 x 238 x 254 (H x W x Dmm)680 x 238 x 254 (H x W x Dmm)
6 x M8 fly points, 4 x M6 for stand adapter
AC18: MTU-18 U Bracket optionalAC28: MTU-28 U Bracket optional
AC2212 & AC2215
12” 2 way full range loudspeaker &15” 2 way full range loudspeaker
AC2212: 50 Hz – 19 kHz (-10dB) AC2215: 42 Hz - 19 kHz (-10dB)
250W / 8Ω
95 & 97 dB (1W/1m)
90° x 50°, 60° x 40° or 100° x 100°
548 x 355 x 352 (H x W x Dmm)637 x 422 x 504 (H x W x Dmm)
15 x M10 fly points
AC2212: MTU-4 U Bracket optionalAC2215: MTU-2 U Bracket optional
JBL CWT SERIES
A typical challenge of many sound reinforcement applications is to provide high quality, full bandwidth sound evenly dispersed across a coverage area greater than 100 degrees. This is often addressed by mounting two speaker systems splayed to achieve wider horizontal coverage. But this approach produces interference (see image right). JBL engineers created an innovative solution to this problem featuring CWT Crossfired Waveguide Technology.
CWT128
Dual 8" 2-Way Loudspeaker System
71 Hz – 20 kHz (-10dB)
1700W (Program) / 8Ω
129 dB (1w@1m)
100V: 110W & 55W
160° x 60° nominal
Barrier strip terminals
811 x 260 x 301 (H x W x Dmm)
4 x M10 suspension points and 4 x M8 for OmniMount wall brackets
Optional: White. WRC and WRX weather resistant versions
NEW
INSTALLED AUDIO
INSTALLED AUDIO
» INSTALLED AUDIO / 4544 / INSTALLED AUDIO «
HIGH PERFORMANCE LOUDSPEAKERS LINE ARRAYS
ALL WEATHER LOUDSPEAKERS
JBL VRX SERIES
VRX900 Series Constant Curvature Line Arrays are designed and built to the same high standards as the high end line arrays and use the same advanced, concert-proven drivers. Perfect for smaller live venues, churches, schools and auditoriums.
VRX932LA
12” 2 way line array speaker
57 Hz – 20 kHz (-10dB)
100° x 15°nominal
1600W program / 8Ω
95 dB (1W/1m passive mode)
349 x 597 x 381 (H x W x Dmm)
Dual 36mm pole socket & 2 x M10 fly points
Optional accessories:VRX-AF array frameSS3-BK Satellite speaker poleSS4-BK Threaded satellite pole
Available in white to order
VRX928LA
8” 2 way line array speaker
70 Hz – 20 kHz (-10dB)
100° x 15°nominal
800W program / 8Ω
90 dB (1W/1m passive mode)
230 x 419 x 267 (H x W x Dmm)
Dual 36mm pole socket & 2 x M10 fly points
Optional accessories:VRX-SMAF array frameSS3-BK Satellite speaker poleSS4-BK Threaded satellite pole
Available in white to order
VRX915S
15” high power subwoofer
35 Hz – 250 Hz (-10dB)
1600W program / 4Ω
91 dB (1W/1m passive mode)
496 x 420 x 597 (H x W x Dmm)
8 x M10 fittings & M20 socket
Optional accessories:VRX-SMAF array frameSS4-BK Threaded satellite pole
Available in white to order
VRX918S
18” high power subwoofer
31 Hz – 220 Hz (-10dB)
1600W program / 8Ω
95 dB (1W/1m passive mode)
508 x 597 x 794 (H x W x Dmm)
M20 socket
Optional accessories:VRX-AF array frameSS4-BK Threaded satellite pole
Available in white to order
SURFACE MOUNT LOUDSPEAKERS SURFACE MOUNT LOUDSPEAKERS
JBL VP POWERED INTEGRATED AUDIO SYSTEMS
Best in class and absolutely stunning. The VP Series was developed not only to deliver the best sound available, they are also very user-friendly while also offering an unprecedented level of intelligent control and monitoring capability. Optimised for use in perfoming arts centres, hotels, auditoriums, convention centres and meeting facilities.
VP7210 (95DP)
10” & 4" Titanium damped diaphrapm 2 way loudspeaker system
50 Hz – 20 kHz (-10dB)
90° x 50° rotatable
875W continuous
132 dB (1m)
521 x 293 x 303 (H x W x D mm)
9 x M10 & 2 x M6 insert points35mm pole socket
VP7212 (64DP & 95DP)
12” & 4" Titanium damped diaphrapm 2 way loudspeaker system
47 Hz – 20 kHz (-10dB)
60° x 40° & 90° x 50° rotatable
1100W continuous
136 dB (1m)
702 x 384 x 524 (H x W x Dmm)
14 x M10 insert points and6 x standard air cargo 3” track
Network modules optional: DPAN and DPCN (CobraNet)
VP7215 (64DP & 95DP)
15” & 4" Titanium damped diaphrapm 2 way loudspeaker system
45 Hz – 20 kHz (-10dB)
60° x 40° & 90° x 50° rotatable
1100W continuous
136 dB (1m)
766 x 448 x 524 (H x W x Dmm)
14 x M10 insert points and6 x standard air cargo 3” track
Network modules optional: DPAN and DPCN (CobraNet)
VPSB7118DP
15” subwoofer system
29 Hz – 165 Hz (-10dB)
1800W continuous
129 dB (1m)
515 x 702 x 813 (H x W x Dmm)
24 x M10 insert points and 8 x standard air cargo 3” track
Network modules optional: DPAN and DPCN (CobraNet)
VP Powered Series installed in Les Mills Britomart
JBL VRX POWERED SERIES
Designed in conjunction with Crown, the compact high power DPC-2 amplifier module features DBT (Dual Bridged Technology™) digital amplification circuitry and is integrated into the rear of the VRX enclosures.
VRX932LAP
12” 2 way line array speaker
57 Hz – 20 kHz (-10dB)
875W continuous
136 dB (1W/1m passive mode)
100° x 15°nominal
349 x 597 x 444 (H x W x Dmm)
Dual 36mm pole socket
Optional accessories:VRX-AF array frameSS3-BK Satellite speaker poleSS4-BK Threaded satellite pole
VRX918SP
18” high power subwoofer
31 Hz – 220 Hz (-10dB)
750W Continuous
126 dB (1W/1m passive mode)
508 x 597 x 749 (H x W x Dmm)
M20 socket
Optional accessories:VRX-AF array frameSS4-BK Threaded satellite pole
powered
powered
The JBL ALL WEATHER Series features high power, lightweight, 2-way, full-range loudspeakers. Highly weather-resistant IP56 rating. Applications include sports facilities, racetracks, stadiums, themed entertainment venues, outdoor background music/paging systems, swimming pools etc.
JBL AE ALL WEATHER LOUDSPEAKERS
AWC82
8" coaxial loudspeaker
80 Hz – 20 kHz (-10dB)
200W program / 8Ω
100V: 200W, 100W, 50W
94 dB (1W/1m)
120° X 120° coverage
300 x 300 x 305 (H x W x Dmm)
2 x M10 points, M6 for safety
U Bracket included
Available in grey or black
AWC129
12" coaxial loudspeaker
80 Hz – 20 kHz (-10dB)
200W program / 8Ω
100V: 200W, 100W, 50W
96 dB (1W/1m)
90° X 90° coverage
402 x 402 x 445 (H x W x Dmm)
2 x M10 points, M6 for safety
U Bracket included
Available in grey or black
AW266 & AW295
12" 2-way high power speaker
AW266: 36 Hz – 20 kHz (-10dB)AW295: 43 Hz – 20 kHz (-10dB)
400W program / 8Ω
100V: 400W, 200W
95 dB (1W/1m)
AW266: 60° X 60° coverageAW295: 90° X 50° coverage
409 x 732 x 452 (H x W x Dmm)
2 x M10 points, 2 x M6 for stabilisation, 1 x M10 for safety
U Bracket included
Available in grey or black
AW526 & AW566 & AW595
15" 2-way high power speaker
35 Hz – 20 kHz (-10dB)
400W program / 8Ω
100V: 400W, 200W
98 dB (1W/1m)
AW526: 120° X 60° coverageAW566: 60° X 60° coverageAW595: 90° X 50° coverage
485 x 810 x 478 (H x W x Dmm)
2 x M10 points, 2 x M6 for stabilisation, 1 x M10 for safety
U Bracket included
Available in grey or black
NEW
INSTALLED AUDIO
INSTALLED AUDIO
» INSTALLED AUDIO / 4746 / INSTALLED AUDIO «
NIGHTCLUB LOUDSPEAKERS
JBL MARQUIS DANCE CLUB SERIES
From thumping mega dance floors to tranquil VIP lounges, from eclectic chill rooms to complex sound booths, the Marquis Dance Club Series systematic loudspeaker designs are scalable to smaller venues, ultra lounges, and mega clubs alike.
MD2
High Power Mid-High Loudspeaker System
270Hz - 20 kHz
MF: 700 W; HF: 150 W
MF: 111 dB SPL; HF: 114 dB SPL
1142.8 x 844.8 x 508.5 mm
MD1
Dual JBL Selenium Super Tweeter
5.5 kHz - 20 kHz (-10dB)
200 W (Program above 5 kHz)
113 dB SPL
184.2 x 421.3 x 305.8 mm
MD3
High Power Dual 15" Low Frequency Loudspeaker
42 - 415 Hz
1600 W
107 dB SPL
1142.8 x 599.8 x 762.5 mm
MD52
Medium Power 90° x 50° 12” 2-Way Full Range Loudspeaker
39Hz - 20 kHz
400 W Passive Only
96 dB SPL
711.2 x 369.4 x 403.7 mm
MD46
High Power 60° x 40° Dual 15" 4-Way Full Range Loudspeaker System
42Hz - 20 kHz
LF: 2000 W / MF: 350 WHF: 100 W / ST: 100
LF: 101 dB SPL / MF: 108 dB SPLHF: 113 dB SPL / ST: 110 dB SPL
1524 x 561 x 657 mm
MD55
Medium Power 90° x 50° 15" 2-Way Full Range Loudspeaker
39 Hz - 20 kHz
500 W Passive Only
99 dB SPL
781.1 x 417.9 x 457.7 mm
MD49
High Power 90° x 50° Dual 15" 4-Way Full Range Loudspeaker System
42Hz - 20 kHz
LF: 2000 W / MF: 350 WHF: 100 W / ST: 100
LF: 101 dB SPL / MF: 108 dB SPLHF: 113 dB SPL / ST: 110 dB SPL
1524 x 561 x 657 mm
MD7
Ultra Long Excursion High Power Dual 18" Subwoofer
22 - 240Hz
4000 W
100 dB SPL(25 - 200 Hz)
762 x 1121.7 x 965.7 mm
Superb Architectural Design and Versatile ConfigurabilityThe Marquis Dance Club Series features stunning, high quality design that is fully complementary with premier club environments. Whether you choose to deploy their stunning architectural features into your overall aesthetic, or configure them into the background, their technical performance is specifically designed for dance clubs to ensure your patrons will be immersed in the soul and depth of the music regardless of where they are in your club. Their wide array of configurability ensures compatibility with the specific design goals, power requirements and coverage needs of any environment you envision. Rugged as well as versatile, the Marquis Dance Club Series is built to the highest professional standards to withstand continuous, demanding professional use and are covered in ruggedized cabinet coverings and durable metal grills that not only will blend in with your design vision, but will handle the nightly abuse of thousands of hours of electrifying sound.
NEW
INSTALLED AUDIO
INSTALLED AUDIO
» INSTALLED AUDIO / 4948 / INSTALLED AUDIO « MIXING CONSOLES MIXING CONSOLES
SOUNDCRAFT GB SERIES
As always with Soundcraft consoles, emphasis for the GB Series has been placed on operational simplicity, clear and intuitive layout and the highest possible audio performance. All GB Series consoles have GB30 Mic preamplifier and GB30 Equaliser designs. For ease of installation with the GB2R, the connector section is contained in a rotatable pod, allowing cable access from the top of the mixer if sat on a table-top, or from the rear when mounted in a 19” rack.
GB2R
12 or 16 Mono Ch
2 Stereo Ch
2 Groups
4 EQ bands
6 Aux sends
2 Returns
Direct Outputs
SOUNDCRAFT EPM & EFX SERIES
Low-cost high-performance mixers. EFX/EPM mixers bring Soundcraft sound quality, performance and value-for-money to a wide range of applications including recording, live sound, install and broadcast. Soundcraft has created an uncluttered and intuitive control surface that enhances the operator experience, with all the appropriate features for modern mixing applications.
SOUNDCRAFT MPMI & MFXI SERIES
Soundcraft’s MFX/MPM mixers are compact and ideally equipped for live sound applications including fixed installations, houses of worship and portable PA.MFX mixers have built-in 24-bit Lexicon processing, delivering 32 stunning reverb, delay and chorus effects.
ANALOG MIXING CONSOLES DIGITAL MIXING CONSOLES
MPMi MFXi
MPMI: 12 or 20 Mono chMFXI: 8, 12 or 20 Mono ch
2 Stereo ch
1 FX Processors (MFXI only)
2 Groups
3 EQ bands
3 Aux sends
MPMI : 1 Returns; MFXi: 3 Returns
RMK Optional 8, 20ch, Included 12ch
9U
EPM EFX
EPM 6, 8 or 12 Mono chEFX 8 or 12 Mono ch
2 Stereo ch
1 FX Processors (EFX only)
3 EQ Bands
2 Aux Sends
EPM: 1 Returns; EFX: 2 Returns
RMK Optional 8ch, Included 12ch
8U
SOUNDCRAFT SI EXPRESSION DIGITAL CONSOLE
SOUNDCRAFT SI PERFORMER DIGITAL CONSOLE
SIE1 SIE2 SIE3
16, 24 or 32 mono mic inputs
4 line inputs
Colour touch screen interface
66 channels to mix possible
Pre/Post selection per input per bus
AES in and out
Global mode encoders
GEQ on every bus
20 sub-group / aux busses
SIP2 SIP3
24 or 32 mono mic inputs
8 line inputs
80 channels to mix possible
LCR panning
Pre/Post selection per input per bus
AES in and out
DMX interface
GEQ on every bus
20 sub-group / aux busses
Powerful, intuitive digital live sound mixing with Lexicon® FX, signal processing from BSS®, dbx® and Studer®, and ViSi remote control. The ViSi Remote iPad® app allows remote control of console features from anywhere in thevenue, even enabling musicians to mix their own monitors on stage from multiple iPads.
Combining legendary Soundcraft sound quality with intuitive, analogue-style operation, Si Performer delivers built-in Lexicon FX, sophisticated 4-band fully parametric EQ and full dynamics processing, a comprehensive range of output options, flexible routing and grouping and remote iPad® control among a feature list that just won't be beaten. Excellent console for houses of worship and corporate AV events, any ‘single-operator’ application event in which sophisticated digital audio mixing is a pre-requisite can now be enhanced with integrated lighting control.
4 FX busses
8 Matrix busses
LR and C Mix busses
4 Stereo Lexicon Effects engines
Delay on inputs and outputs
4 Mute Groups
Freely assignable insert loops
Soundcraft FaderGlow™
64x64 channel option card slot
4 FX busses
8 Matrix busses
LRC Mix busses
4 Stereo Lexicon Effects engines
Delay on inputs and outputs
8 Mute & VCA Groups
Freely assignable insert loops
Soundcraft FaderGlow™
64x64 channel option card slot
SOUNDCRAFT DIGITAL STAGEBOXES
MSB Mini Stage Box
16 or 32 Ch
8 Returns (MSB-16)8 Returns + 4 AESEBU (MSB-32)
Cat5 (Ethercon) connectors
Included: Console card
Optional: Optical card option
CSB Compact Stage Box
32 Ch
16 Analog returns
Card options: Optical or Cat5
Optional: 8 Analog returns + 4 AESEBU panel. Other card options CobraNet, Aviom, ADAT and RockNet
More analog consoles Pg 82-83 More digital console details Pg 79-80