ICS 83.080.01

Descriptors: Plastics, testing, thermoanalysis, DSC.

Kunststoffe – Dynamische Differenz-Thermoanalyse (DSC) – Teil 1:Allgemeine Grundlagen (ISO 11357-1 : 1997)

Ref. No. DIN EN ISO 11357-1 : 1997-11English price group 08 Sales No. 1108

04.98

DEUTSCHE NORM November 1997

EN ISO 11357-1{

EN comprises 12 pages.

© No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut für Normung e.V., Berlin.Beuth Verlag GmbH, D-10772 Berlin, has the exclusive right of sale for German Standards (DIN-Normen).

Plastics – Differential scanning calorimetry (DSC)Part 1:General principles (ISO 11357-1 : 1997)

English version of DIN EN ISO 11357-1

European Standard EN ISO 11357-1 : 1997 has the status of a DIN Standard.

A comma is used as the decimal marker.

National forewordThis standard has been published in accordance with a decision taken by CEN/TC 249 to adopt, withoutalteration, International Standard ISO 11357-1 as a European Standard.The responsible German body involved in its preparation was the Normenausschuß Kunststoffe (PlasticsStandards Committee), Technical Committee Physikalische, rheologische und analytische Prüfungen.DIN EN ISO 291*) is the standard corresponding to International Standard ISO 291 referred to in clause 2of the EN.

National Annex NAStandard referred to(and not included in Normative references)DIN EN ISO 291 Plastics – Standard atmospheres for conditioning and testing (ISO 291 : 1997)

English version

ICS 83.080.01

Descriptors: Plastics, testing, thermoanalysis, DSC.

Central Secretariat: rue de Stassart 36, B-1050 Brussels

European Committee for StandardizationComité Européen de NormalisationEuropäisches Komitee für Normung

Plastics – Differential scanning calorimetry (DSC)Part 1: General principles

(ISO 11357-1 : 1997)

© 1997. CEN – All rights of exploitation in any form and by any meansreserved worldwide for CEN national members.

Ref. No. EN ISO 11357-1 : 1997 E

Plastiques – Analyse calorimétriquedifférentielle (DSC) – Partie 1: Principesgénéraux (ISO 11357-1 : 1997)

Kunststoffe – Dynamische Differenz-Thermoanalyse (DSC) – Teil 1: Allge-meine Grundlagen (ISO 11357-1 : 1997)

This European Standard was approved by CEN on 1997-03-28.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concerning such national stand-ards may be obtained on application to the Central Secretariat or to any CENmember.The European Standards exist in three official versions (English, French, German).A version in any other language made by translation under the responsibility of aCEN member into its own language and notified to the Central Secretariat has thesame status as the official versions.CEN members are the national standards bodies of Austria, Belgium, the CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland,and the United Kingdom.

ÈÉË

EN ISO 11357-1

April 1997

Page 2EN ISO 11357-1 : 1997

ForewordInternational StandardISO 11357-1 : 1997 Plastics – Differential scanning calorimetry (DSC) – Part 1: General principles,which was prepared by ISO/TC 61 ‘Plastics’ of the International Organization for Standardization, has beenadopted by Technical Committee CEN/TC 249 ‘Plastics’, the Secretariat of which is held by IBN, as a EuropeanStandard.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, and conflicting national standards withdrawn, by October 1997 at the latest.In accordance with the CEN/CENELEC Internal Regulations, the following countries are bound to implementthis European Standard:Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom.

Endorsement noticeThe text of the International Standard ISO 11357-1 : 1997 was approved by CEN as a European Standardwithout any modification.

Page 3EN ISO 11357-1 : 1997

Page 4EN ISO 11357-1 : 1997

Page 5EN ISO 11357-1 : 1997

Page 6EN ISO 11357-1 : 1997

Page 7EN ISO 11357-1 : 1997

Page 8EN ISO 11357-1 : 1997

Page 9EN ISO 11357-1 : 1997

Page 10EN ISO 11357-1 : 1997

Page 11EN ISO 11357-1 : 1997

Page 12EN ISO 11357-1 : 1997