-
Bio Fuels and Oils Ltd www.biofuelsandoils.com
ISCC Registration No. 1896 Copia House, Great Cliffe Road,
Barnsley S75 3SP
1
ISCC EU Biodiesel (UK) – B100 UCOME EN 14214
Fuel Specification
• ISCC EU Certified 100% Used Cooking Oil Biodiesel
• Approved Diesel Motor Fuel to EN 14214
• HMRC NRMM (Non Road Motor Machinery) Motor Oil
• Renewable Energy Directive (RED) approved fuel
• Lower Diesel Exhaust Emissions (NOx & PM10)
• HMRC Notice 179 and 179E Motor Oil
• No Diesel engine modifications required
• Manufactured for UK Climate temperatures to -12C
• Biodegradable when spilled in 28 days
• EA classified as “Non Hazardous Waste” when spilled
• BREEAM qualifying low carbon technology
• EA Carbon Reduction Commitment (CRC) exempt fuel
• Excise duty reclaimable for Electricity Generation EX 55
• Diesel Fuel Shelf life of 45 days
-
Bio Fuels and Oils Ltd www.biofuelsandoils.com ISCC Registration
No. 1896 Copia House, Great Cliffe Road, Barnsley S75 3SP
ISCC EU Biodiesel (UK) - Used Cooking Oil Methyl Esters (UCOME)
to EN 14214
Test / Analyte Test Method / Norm
Spezification Result Unit
Min. Max.Density @ 15 °C DIN EN ISO
12185 860 900 883.2 kg/m3
kin. Viscosity 40°C DIN EN ISO 3104 3.5 5 4.451 mm2/s Flashpoint
DIN EN ISO 3104 120 -- 178 °C Sulphur DIN EN ISO
20846 0 10 1.4 mg/kg
Sulfat ash DIN ISO 3987 -- 0.02
-
Safety Data Sheet
Biodiesel B100Manufacturer/Supplier: Bio Fuels and Oils
LtdAddress: Copia House, Great Cliffe Court S75 3SPContact: Quality
Manager Telephone: 020 3289 1062Email:
[email protected] phone: 020 3289 1062
MATERIAL SAFETY DATA SHEET BIODIESEL EN14214 2017
1. Identification of product and producer
Name of product: Biodiesel Product description: Methyl esters
from lipid sources Producer’s identification: Name of producer:
Various
2. Composition / Information on ingredients:
This product is made by methyl esters from 96.5% lipid sources,
accordingly to CAS 73891-99-3. The product contains no hazardous
materials.
3. Hazards identification
INHALATION: Negligible if not heated to produce vapours. Vapours
or finally misted materials may irritate the mucous membranes and
cause irritation, dizziness and nausea. Remove to fresh air.
EYE CONTACT: May cause irritation. Irrigate eye with water for
at least 15 to 20 minutes. Seek medical attention if symptoms
persist.
SKIN CONTACT: Prolonged or repeated contact is not likely to
cause significant skin irritation. Material is sometimes
encountered at elevated temperatures. Thermal burns are
possible.
INGESTION: No hazards anticipated from ingestion incidental to
industrial exposure.
-
4. First aid measures
EYES: Irrigate eyes with a heavy stream of water for at least 15
to 20 minutes.
SKIN: Wash exposed areas of the body with soap and water.
INHALATION: Remove from area of exposure; seek medical attention
if symptoms persist.
INGESTION: Give one or two glasses of water to drink. If
gastric-intestinal symptoms develop, consult medical personnel.
(Never give anything by mouth to an unconscious person).
5. Fire fighting measures
- Flash Point (Method Used) : 130 C- Flammability Limits : None
known
Extinguishing media:
Dry chemical, foam, CO2, water spray (fog). Water stream may
splash the burning liquid and spread fire.
Special fire fighting procedures : Use water spray to cool drums
exposed to fire. Unusual fire and explosion hazards: Oil soaked
rags can cause spontaneous combustion if not handled properly.
Before disposal, wash rags with soap and dry in well-ventilated
area. Fire fighters should use self-contained breathing apparatus
to avoid exposure to smoke and vapour.
6. Accidental release measures spill clean-up procedures:
Remove sources of ignition, contain spill to smallest area
possible. Stop leak if possible. Pick up small spills with
absorbent materials such as paper towels, “oil dry”, sand or dirt.
Recover large spills for salvage or disposal. Wash hard surfaces
with safety solvent or detergent to remove remaining oil film.
Greasy nature will result in a slippery surface.
7. Handling and storage
Store in closed containers less than 50C. Keep away from
oxidizing agents, excessive heat and /or ignition sources. Store
and use in well ventilated areas. Do not store or use near heat,
spark or flame, store out of sun. Do not puncture, drag or slide
the container.
-
8. Exposure control / personal protection
If vapours or mists are generated, wear an approved organic
vapour/mist respirator mask. Safety glasses, goggles or face shield
recommended to protect eyes from mists or splashing. PVC coated
gloves recommended to prevent skin contact. Employees must practice
good personal hygiene, washing exposed areas of skin several times
daily and laundering contaminated clothing before re-use.
9. Physical and chemical properties
The Biodiesel is produced and delivered as per EN 14214
Standard. Organoleptical properties: Typical Values.
Characteristics Admissibility conditions Appearance Fluid, free of
sediments; Colour Yellow / Brown Odour Characteristic for
vegetables oil
Chemical properties:
Values Charachteristics Units Min Max
Ester content %(m/m) 96.5 Density at 15°C kg/m3 860 900
Viscosity at 40°C mm 2/s 3,50 5,00 Flash point °C 150 Sulphur
content mg/kg 10,0 Carbon residue (10% distillation residue) %(m/m)
0,30 Cretonne number 51,0 Sulfur Ash content %(m/m) 0,02 Water
mg/kg 500 Total contamination mg/kg 24 Copper corrosion ( 3 h at
50°C) cotter Class 1 Oxidation stability (110ºC) h g/mc3 6,0 Acid
value mg KOH/g 0,50 Iodine value g I2/100 g 120 Linolenic acid
methyl ester %(m/m) 12 Methanol content %(m/m) 0,20 Mono glycerides
%(m/m) 0,80 Bi glycerides %(m/m) 0,20 Tri glycerides %(m/m) 0,20
Free glycerol %(m/m) 0,02 Total glycerol %(m/m) 0,25 Sodium +
Potassium mg/kg 5,0 Calcium Magnesium mg/kg 5,0 Phosphorus mg/kg
10,0
-
10. Stability and reactivityThis product is stable and hazardous
polymerization will not occur.Incompatible materials and conditions
to avoid: strong oxidizing agents. During combustion will produce
black smoke.
11. Toxic Hazards:Not know
12. Ecological information:
- Biodegradable and can pollute rivers and streams in large
quantities- It is not toxic.
13. Evacuation considerations
Remove sources of ignition, contain spill to smallest area
possible. Stopleak if possible. Pick up small spills with absorbent
materials such as paper towels, “oil dry”, sand or dirt. Recover
large spills for salvage or disposal. Wash hard surfaces with
safety solvent or detergent to remove remaining oil film. Greasy
nature will result in a slippery surface.
14. Transport information:
The transport should respect the local transport’s regulations
for foodand oil materials.
15. Other Information
Technical control: Store and use in well ventilated areas. Do
not store oruse near heat, spark or flame, store out of sun. Do not
puncture, drag or slide the container. Employees must practice good
personal hygiene, washing exposed areas of skin several times daily
and laundering contaminated clothing before re-use. Administrative
control: Employees shall be informed about the possible risks that
may occur handling biodiesel.
This information relates only to the specific material
designated and may not be valid for such material used in
combination with any other materials or in any other process. Such
information is to the best of company’s knowledge and believed
accurate and reliable as of the date indicated. However, no
representation, warranty or guarantee of any kind, express or
implied, is made as to its accuracy, reliability or completeness
and we assume no responsibility for any loss, damage or expense,
direct or consequential, arising out of use. It is user’s
responsibility to satisfy himself as to suitableness and
completeness of such information for his own particular use.
Charachteristics: Units: Ester content: fill_1: Density at 15C:
Viscosity at 40C: Flash point: 150: Sulphur content: 150mgkg:
150_2: Cretonne number: 510: Sulfur Ash content: 510mm: Water:
510mgkg: Total contamination: 510mgkg_2: Copper corrosion 3 h at
50C: 24: 24_2: Acid value: mg KOHg: Iodine value: g I2100 g:
Linolenic acid methyl ester: fill_14: 12: Methanol content: mm:
Mono glycerides: mm_2: Bi glycerides: mm_3: Tri glycerides: mm_4:
Free glycerol: mm_5: Total glycerol: mm_6: Sodium Potassium: mgkg:
Calcium Magnesium: mgkg_2: Phosphorus: mgkg_3:
