Specification Forms forProcess Measurement andControl InstrumentsPart 1: General Considerations

Approved 04 April 2001

ISATR20.00.012001

T E C H N I C A L R E P O R T

ISA The Instrumentation,Systems, and

Automation Society

TM

NOTICE OF COPYRIGHTThis is a copyrighted document and may not be copied or distributed in anyform or manner without the permission of ISA. This copy of the document wasmade for the sole use of the person to whom ISA provided it and is subject tothe restrictions stated in ISAs license to that person. It may not be provided toany other person in print, electronic, or any other form. Violations of ISAscopyright will be prosecuted to the fullest extent of the law and may result insubstantial civil and criminal penalties.

ISATR20.00.012001Specification Forms for Process Measurement and Control InstrumentsPart 1: General Considerations

ISBN: 1-55617-754-2

Copyright 2001 by ISAThe Instrumentation, Systems, and Automation Society. All rights reserved.Not for resale. Printed in the United States of America. No part of this publication may be reproduced,stored in a retrieval system, or transmitted, in any form or by any means (electronic, mechanical,photocopying, recording, or otherwise), without the prior written permission of the Publisher.

ISA67 Alexander DriveP. O. Box 12277Research Triangle Park, North Carolina 27709USA

3 ISATR20.00.012001

Preface

This preface, as well as all footnotes and annexes, is included for information purposes and is not part ofISATR20.00.012001.

The standards referenced within this document may contain provisions that, through reference in this text,constitute requirements of this document. At the time of publication, the editions indicated were valid. Allstandards are subject to revision, and parties to agreements based on this document are encouraged toinvestigate the possibility of applying the most recent editions of the standards indicated within thisdocument. Members of IEC and ISO maintain registers of currently valid International Standards. ANSImaintain registers of currently valid U.S. National Standards.

This document has been prepared as part of the service of ISAThe Instrumentation, Systems, andAutomation Society, toward a goal of uniformity in the field of instrumentation. To be of real value, thisdocument should not be static but should be subject to periodic review. Toward this end, the Societywelcomes all comments and criticisms and asks that they be addressed to the Secretary, Standards andPractices Board; ISA; 67 Alexander Drive; P. O. Box 12277; Research Triangle Park, NC 27709;Telephone (919) 549-8411; Fax (919) 549-8288; E-mail: standards@isa.org.

The ISA Standards and Practices Department is aware of the growing need for attention to the metricsystem of units in general, and the International System of Units (SI) in particular, in the preparation ofinstrumentation standards. The Department is further aware of the benefits to USA users of ISAstandards of incorporating suitable references to the SI (and the metric system) in their business andprofessional dealings with other countries. Toward this end, this Department will endeavor to introduceSI-acceptable metric units in all new and revised standards, recommended practices, and technicalreports to the greatest extent possible. Standard for Use of the International System of Units (SI): TheModern Metric System, published by the American Society for Testing & Materials as IEEE/ASTM SI 10-97, and future revisions, will be the reference guide for definitions, symbols, abbreviations, andconversion factors.

It is the policy of ISA to encourage and welcome the participation of all concerned individuals andinterests in the development of ISA standards, recommended practices, and technical reports.Participation in the ISA standards-making process by an individual in no way constitutes endorsement bythe employer of that individual, of ISA, or of any of the standards, recommended practices, and technicalreports that ISA develops.

CAUTION ISA ADHERES TO THE POLICY OF THE AMERICAN NATIONAL STANDARDSINSTITUTE WITH REGARD TO PATENTS. IF ISA IS INFORMED OF AN EXISTING PATENT THAT ISREQUIRED FOR USE OF THE STANDARD, IT WILL REQUIRE THE OWNER OF THE PATENT TOEITHER GRANT A ROYALTY-FREE LICENSE FOR USE OF THE PATENT BY USERS COMPLYINGWITH THE STANDARD OR A LICENSE ON REASONABLE TERMS AND CONDITIONS THAT AREFREE FROM UNFAIR DISCRIMINATION.

EVEN IF ISA IS UNAWARE OF ANY PATENT COVERING THIS STANDARD, THE USER ISCAUTIONED THAT IMPLEMENTATION OF THE STANDARD MAY REQUIRE USE OF TECHNIQUES,PROCESSES, OR MATERIALS COVERED BY PATENT RIGHTS. ISA TAKES NO POSITION ON THEEXISTENCE OR VALIDITY OF ANY PATENT RIGHTS THAT MAY BE INVOLVED IN IMPLEMENTINGTHE STANDARD. ISA IS NOT RESPONSIBLE FOR IDENTIFYING ALL PATENTS THAT MAYREQUIRE A LICENSE BEFORE IMPLEMENTATION OF THE STANDARD OR FOR INVESTIGATINGTHE VALIDITY OR SCOPE OF ANY PATENTS BROUGHT TO ITS ATTENTION. THE USER SHOULDCAREFULLY INVESTIGATE RELEVANT PATENTS BEFORE USING THE STANDARD FOR THEUSERS INTENDED APPLICATION.

ISATR20.00.012001 4

HOWEVER, ISA ASKS THAT ANYONE REVIEWING THIS STANDARD WHO IS AWARE OF ANYPATENTS THAT MAY IMPACT IMPLEMENTATION OF THE STANDARD NOTIFY THE ISASTANDARDS AND PRACTICES DEPARTMENT OF THE PATENT AND ITS OWNER.

ADDITIONALLY, THE USE OF THIS STANDARD MAY INVOLVE HAZARDOUS MATERIALS,OPERATIONS OR EQUIPMENT. THE STANDARD CANNOT ANTICIPATE ALL POSSIBLEAPPLICATIONS OR ADDRESS ALL POSSIBLE SAFETY ISSUES ASSOCIATED WITH USE INHAZARDOUS CONDITIONS. THE USER OF THIS STANDARD MUST EXERCISE SOUNDPROFESSIONAL JUDGMENT CONCERNING ITS USE AND APPLICABILITY UNDER THE USERSPARTICULAR CIRCUMSTANCES. THE USER MUST ALSO CONSIDER THE APPLICABILITY OFANY GOVERNMENTAL REGULATORY LIMITATIONS AND ESTABLISHED SAFETY AND HEALTHPRACTICES BEFORE IMPLEMENTING THIS STANDARD.

The following people served as members of ISA Committee SP20:

NAME COMPANY

G. Barta, Chairman Bechtel Corp.W. Albe Dow Corning Corp.S. Alvarez Compania Inspeccion MexicanaT. Baldwin Brown & Root, Inc.N. Battikha Bergo Tech, Inc.E. Berger Mitre Corp.J. Carew ConsultantT. Caston Eastman Chemicals Co.B. Cleary Rosemount, Inc.K. Cole Burns & Roe EnterprisesE. Crawford Nova Control Systems, Inc.T. D. Daniel ConsultantA. Engels Praxair, Inc.G. Erk ConsultantF. Ford Bayer Corp.G. Gifford FlowserveR. Gulley Vara InternationalR. Hartman Fisher-Rosemount Systems, Inc.C. Hill Brown & Root, Inc.H. Hinssen Exxon Chemical EngineeringW. Ingham Stantec Consulting Ltd.A. Iverson Ivy OptiksD. Kelly VECO Rocky Mountain, Inc.H. Koning DSM ServicesM. Kulkarni General Instruments ConsortiumT. McAvinew Merrick & Co.A. McCauley Chagrin Valley Controls, Inc.J. McQuighan Constellation EnergyJ. Meppen Y. Meppen ConsultantsD. Osborn Greeley & HansenC. Phillips Technip USA Corp.G. Ramachandran Cytec Industries, Inc.G. Richardson Thermco Instrument Corp.J. Rourke Jacobs Engineering GroupP. Rowland SOIGNE Associates, Inc.G. Sanders Penberthy, Inc.M. Scott Process Measurement Tech. Ltd.J. Sen Bechtel Corp.

5 ISATR20.00.012001

R. Shah ConsultantJ. Soos Huntsman Corp.M. Spencer Desktop Engineering Ltd.J. Summerfield ConsultantR. Sundar Foster Wheeler USA Corp.L. Takeyasu Kenonic Controls, Inc.D. Taylor Spartan ControlsR. Town Jefferson Services Co, Inc.I. Verhappen Syncrude Canada Ltd.E. Welch Duke/Fluor Daniel, Inc.B. Williams Merck & Co. Inc.

This technical report was approved for publication by the ISA Standards and Practices Board on04 April 2001.

NAME COMPANY

M. Zielinski Fisher-Rosemount Systems, Inc.D. Bishop ConsultantM. Cohen ConsultantM. Coppler Ametek, Inc.B. Dumortier Schneider ElectricW. Holland Southern CompanyE. Icayan Advanced Control & Engineering SolutionsA. Iverson Ivy OptiksR. Jones Dow Chemical Co.V. Maggioli Feltronics Corp.T. McAvinew Merrick & Co.A. McCauley, Jr. Chagrin Valley Controls, Inc.G. McFarland Westinghouse Process Control Inc.D. Rapley Rapley Consulting Inc.R. Reimer Rockwell AutomationJ. Rennie Factory Mutual Research Corp.H. Sasajima Yamatake Corp.I. Verhappen Syncrude Canada Ltd.R. Webb Power EngineersW. Weidman Parsons Energy & Chemicals GroupJ. Weiss EPRIM. Widmeyer EG&G Defense MaterialsR. Wiegle CANUS Corp.C. Williams Eastman Kodak Co.G. Wood Graeme Wood Consulting

This page intentionally left blank.

7 ISATR20.00.012001

Contents

Preface.......................................................................................................................................................... 3

Foreword ....................................................................................................................................................... 9

Introduction ................................................................................................................................................. 11

1 Scope................................................................................................................................................... 13

2 Normative references .......................................................................................................................... 13

3 Definitions ............................................................................................................................................ 13

4 Application ........................................................................................................................................... 13

4.1 Operating parameters documentation.......................................................................................... 13

4.2 Preliminary inquiry/quotation ........................................................................................................ 13

4.3 Traditional specification................................................................................................................ 13

4.4 Conforming specification .............................................................................................................. 13

5 Requirements ...................................................................................................................................... 14

5.1 Three form parts ........................................................................................................................... 14

5.2 Form numbers and titles for Operating Parameters forms........................................................... 14

5.3 Form numbers and titles for Device Specification forms.............................................................. 14

5.4 Form numbers and titles for General or Special Requirements forms......................................... 14

6 General sections of ISA specification forms........................................................................................ 14

6.1 Specification identification section................................................................................................ 14

6.2 Endorsements .............................................................................................................................. 14

6.3 Revision chronicle ........................................................................................................................ 14

6.4 Component identification.............................................................................................................. 15

7 Classification and designation ................................................................................................ ............. 15

Annex A (informative) Specification forms tables of contents ................................................................. 17

Annex B (informative) Approved specification forms............................................................................... 23

Annex C (informative) Specification forms pick list and contextual help references .............................. 75

This page intentionally left blank.

9 ISATR20.00.012001

Foreword

This technical report has been prepared by ISAs SP20 standards committee, Instrument SpecificationForms. The ISA-SP20 committee welcomes comments and suggestions, and requests that they beaddressed to the Chairperson, ISA-SP20, ISA, 67 Alexander Drive, Research Triangle Park, NC 27709USA.

This technical report provides separate form parts for operating parameters, device specifications, andgeneral requirements. Forms from ISA-20-1981 have been modified extensively, and many of the formsrepresent new devices not previously covered.

This technical report applies to all processes of development and use of ISA specification forms for processmeasurement and control instruments. It provides the listing of the forms, the classification of the devices,and the approved forms.

The other parts of the series, Specification Forms for Process Measurement and Control Instruments, are asfollows:

ISA Draft 20.00.02 Part 2: Instructions for Using Specification Forms

ISA20.00.032001 Part 3: Form Requirements and Development Guidelines

ISA Draft TR20.00.04 Part 4: Data Dictionary

This page intentionally left blank.

11 ISATR20.00.012001

Introduction

The completion of instrument specification forms is an extremely important segment of the completedesign, purchase, and manufacture of process measurement and control instrumentation.

Approved ISA specification forms for many devices are developed that follow the guidelines ofISA20.00.032001 and have been reviewed by users and manufacturers. These forms are adequate formost applications and can be provided by ISA. The defining of specification forms and a data dictionarywill allow electronic data exchange between users and manufacturers.

The purposes of ISA specification forms are

a) to assist in preparation of a complete specification by listing and providing space for all principaldescriptive attributes;

b) to facilitate quoting, bid reviews, purchasing, receiving, calibration, inspection, piping design, designaudit, accounting, and ordering procedures by uniform display of information;

c) to improve efficiency of instrumentation activities from initial concept to final commissioning and anysubsequent reviews and revisions; and

d) to provide standard data definitions and field lengths adequate for electronic exchange of information.

This page intentionally left blank.

13 ISATR20.00.012001

1 Scope

Instrument devices with dedicated functionality may be specified using data-sheet-type, approved ISAspecification forms. This technical report does not address system specifications such as shared controland shared display devices, where extensive use of functionality or performance specifications is required.

This technical report lists the ISA specification forms by form part category, measured or initiatingvariable, readout, or final control device categories, and form number. A form numbering system hasbeen implemented that identifies the form categories, device function grouping, and page number. Theform number, title, and development status is listed for each proposed or approved form.

2 Normative references

ISA20.00.032001, Specification Forms for Process Measurement and Control Instruments, Part 3: FormRequirements and Development Guidelines.

3 Definitions

For the purpose of this technical report, the following definition applies:

3.1 specification form:the document, or its electronic data equivalent, that details the statement of parameters or propertiesprescribing the design basis, construction, materials, and performance for an instrument to be supplied.

4 Application

ISA specification forms may be used for the following different levels of device specification.

4.1 Operating parameters documentation

Documentation of the operating parameters may be completed and endorsed independently of thehardware device selection and preliminary specification through the use of the separate form page.

4.2 Preliminary inquiry/quotation

For a preliminary inquiry or quotation, the specifier and vendor may agree on a minimum level ofinformation. In this case, the specifier may mark with an asterisk (*) in the revision column of the OperatingParameters or Device Specification forms, any lines that the recipient of the specification form is requestedto complete.

4.3 Traditional specification

Documentation of operating parameters required for sizing or selection analysis, and identification of theinstrument properties that are pertinent to the development of a manufacturers model number, should bethe minimum data provided on specification forms used to purchase instruments.

4.4 Conforming specification

A complete specification ideally should include all relevant information about the main device andassociated secondary devices that has been agreed to by the purchaser and supplier. In this case, the fullycompleted specification form can be used for the final documentation of the instrument specifications.

ISATR20.00.012001 14

5 Requirements

5.1 Three form parts

ISA specification forms are generally comprised of three form parts for the following informationorganization:

a) Operating Parameters forms are developed to document the process application and designconditions for communication to instrument specifiers and manufacturers.

b) Device Specification forms are developed to provide the information to initially size and select a maindevice and the information to identify requirements for attached and directly associated devices.

c) General or Special Requirements forms are developed to provide means for the specifier to identifygeneral or special requirements that are applicable to the device, but need additional space beyondthat available in the other two types of forms.

5.2 Form numbers and titles for Operating Parameters forms

A common form is developed for all devices sharing the same measured variable or final control element.Table A.1, annex A, identifies assigned categories, ISA form numbers, and titles.

5.3 Form numbers and titles for Device Specification forms

Device Specification forms are grouped and numbered based upon a device category code, the form partnumber, and an instrument function subcategory sequential number. Table A.2, annex A, identifiesassigned device categories, ISA form numbers, and titles.

5.4 Form numbers and titles for General or Special Requirements forms

A single form is provided for the initial page of the General or Special Requirements forms. Table A.3,annex A, identifies the assigned ISA form number and title.

6 General sections of ISA specification forms

6.1 Specification identification section

Operating Parameters, Device Specification, and General or Special Requirements forms utilize the samespecification identification field prompts.

6.2 Endorsements

Endorsement identifications and status inference, such as originator, checker, approver, and origin date,should be independent throughout each form type.

6.3 Revision chronicle

Identification of the three most recent entries recorded in the revision chronicle should be independentthroughout each form type.

15 ISATR20.00.012001

6.4 Component identification

Identification of the instrument, such as primary tag number, description, line/equipment number, andreference drawing number, should be identical throughout each form type.

7 Classification and designation

Hardware specification forms are based on specific hardware types as classified in annex A.

This page intentionally left blank.

17 ISATR20.00.012001

Annex A (informative) Specification forms tables of contents

Table A.1 Operating parameter device categories and form titles

Form Number Form Title Development Status,ISA-SP20

20A1001 Analysis Device In process

20A1002 Analysis Device Components In process

20B1001 Burner or Combustion Device

20C1001 Valve or Regulator Device Approved (Annex B)20F1001 Flow Device Approved (Annex B)20H1001 Hand Control Device

20L1001 Level Device Approved (Annex B)20P1001 Pressure or Differential Pressure Device Approved (Annex B)20P1002 Pressure Safety Device In process

20R1001 Receiver Device

20T1001 Temperature Device Approved (Annex B)20U1001 Basic Engineering Design Data In process

20V1001 Vibration or Mechanical Analysis Device

20W1001 Weight Device

20X1001 Unclassified Device

20Y1001 Relay or Compute or Converter Device

20Z1001 Position Device

Table A.2 Device specification categories and form titles

Form Number Form Title Development Status,ISA-SP20

Analysis Devices

20A2101 Carbon Dioxide Monitor

20A2111 Combustible Gas Analyzer In process

20A2121 Flue & Stack Gas Analyzer

20A2141 Chromatograph Analyzer In process

20A2142 Chromatograph Analyzer Components In process

20A2151 In Situ Oxygen Analyzer In process

20A2161 Extractive Oxygen Analyzer In process

20A2162 Extractive Oxygen Analyzer Components In process

20A2171 Opacity Analyzer

20A2181 Toxic Gas Analyzer

ISATR20.00.012001 18

Table A.2 Device specification categories and form titles(cont'd)

Analysis Devices (contd)20A2191 Dissolved Oxygen Analyzer

20A2201 Infrared or Ultraviolet Analyzer In process

20A2202 Infrared or Ultraviolet Analyzer Components In process

20A2301 Ion-Selective Analyzer

20A2311 Liquid Density or Specific Gravity Transmitter In process

20A2321 Nuclear-Type Density Transmitter In process

20A2331 Oil-In-Water Detector

20A2341 PH or ORP Transmitter w/wo Insertion Assembly

20A2351 Turbidity or Colorimeter Analyzer In process

20A2361 Viscometer In process

20A2371 Moisture Analyzer In process

20A2372 Moisture Analyzer Components

20A2381 Conductivity Analyzer w/wo Insertion Assembly In process

20A2901 Sample Conditioning System w/wo Switches and Valves In process

Burner or Combustion Devices

20B2001 Flame Detector

20B2101 Flame Monitor

Valve or Regulator Devices

20C2001 Linear Motion Type Control Valve Assembly Approved (Annex B)20C2002 Linear Motion Type Control Valve Auxiliaries Approved (Annex B)20C2011 Rotary Motion Type Control Valve Assembly Approved (Annex B)20C2012 Rotary Motion Type Control Valve Auxiliaries Approved (Annex B)20C2021 Severe Service Control Valve Assembly In process

20C2022 Severe Service Control Valve Auxiliaries In process

20C2031 Desuperheater Control Valve

20C2041 Motor-Operated Valve Assembly In process

20C2042 Motor-Operated Valve Auxiliaries In process

20C2101 Recirculation Control Valve

20C2111 Pressure Regulator w/wo Pilot Valve In process

20C2121 Pressure Relief Valve w/wo Pilot Valve In process

20C2131 Temperature Regulator Valve In process

20C2201 Power-Actuated Block Valve Assembly In process

20C2202 Power-Actuated Block Valve Auxiliaries In process

20C2211 Solenoid Valve

20C2221 Manual-Actuated Block Valve Assembly

19 ISATR20.00.012001

Table A.2 Device specification categories and form titles (cont'd)Flow Devices

20F2001 Anemometer Element

20F2011 Elbow Meter

20F2021 Flow Nozzle w/wo Meter Tube Approved (Annex B)20F2031 Orifice Plate Approved (Annex B)20F2041 Orifice Plate Assembly w/wo Meter Tube Approved (Annex B)20F2051 Multivariable Flow Transmitter Approved (Annex B)20F2061 Paddle Flow Switch

20F2071 Pitot Tube w/wo Insertion Assembly In process

20F2081 Segmental Wedge Flowmeter

20F2091 Target Flowmeter

20F2101 V-Cone Flow Element

20F2111 Venturi or Flow Tube w/wo Meter Tube Approved (Annex B)20F2211 Flume Flowmeter

20F2221 Open Channel Flowmeter

20F2231 Rotameter Flowmeter In process

20F2241 Rotameter Transmitter

20F2251 Variable Area Flowmeter

20F2261 Weir Flowmeter

20F2311 Doppler Flowmeter

20F2321 Magnetic Flowmeter w/wo Integral Totalizer Indicator Approved (Annex B)20F2331 Nuclear Type Flowmeter

20F2341 Sonic or Ultrasonic Flowmeter In process

20F2351 Thermal Flowmeter

20F2361 Thermal Dispersion Flow Switch

20F2371 Turbine Flowmeter w/wo Totalizer Indicator In process

20F2381 Vortex or Swirl Flowmeter w/wo Totalizer Indicator Approved (Annex B)20F2411 Positive Displacement Flowmeter Direct-Reading Type In process

20F2421 Positive Displacement Flow Transmitter In process

20F2431 Variable Area Flow Switch In process

20F2511 Mass Type Flowmeter

20F2521 Coriolis Mass Flowmeter w/wo Totalizer Indicator Approved (Annex B)20F2611 Sight Flow Glass In process

Hand Control Devices

20H2001 Instrument Valve In process

20H2011 Instrument Manifold Valve

ISATR20.00.012001 20

Table A.2 Device specification categories and form titles (cont'd)Level Devices

20L2101 Capacitance or RF Admittance Level Transmitter w/wo Switches Approved (Annex B)20L2111 Differential Pressure Level Transmitter - Flange Mounted Approved (Annex B)20L2121 Displacer-Type Level Transmitter or Local Controller Approved (Annex B)20L2131 Tape Level Gauge or Transmitter w/wo Switches In process

20L2141 Nuclear Radiation Level Transmitter w/wo Switches Approved (Annex B)20L2151 Resistance-Tape Level Transmitter w/wo Switches Approved (Annex B)20L2161 Radar Level Transmitter w/wo Switches

20L2171 Non-contact Ultrasonic Level Transmitter w/wo Switches Approved (Annex B)20L2181 Magnetostrictive Level Transmitter w/wo Switches In process

20L2301 Capacitance or RF Admittance Level Switch Approved (Annex B)20L2311 Float or Displacer Level Switch Approved (Annex B)20L2312 Tank Level Gauge or Indicator w/wo Switches Approved (Annex B)20L2321 Nuclear Radiation Level Switch Approved (Annex B)20L2331 Resistance Tape Level Switch

20L2341 RF or Radar or Micro Level Switch

20L2351 Ultrasonic Contact-Type Level Switch Approved (Annex B)20L2361 Vibrating Element Level Switch

20L2371 Rotary Level Switch Approved (Annex B)20L2501 Liquid Level Gage Glass w/wo Illuminator Approved (Annex B)20L2511 Magnetic Liquid Level Gage or Indicator w/wo Switches Approved (Annex B)20L2521 Tape Float Tank Gauge

Pressure or Differential Pressure Devices

20P2001 Pressure Gauge Approved (Annex B)20P2011 Pressure Gauge With Diaphragm Seal Approved (Annex B)20P2101 Differential Pressure Gauge Approved (Annex B)20P2201 Pressure Transmitter Approved (Annex B)20P2211 Pressure Transmitter With Diaphragm Seal Approved (Annex B)20P2301 Differential Pressure Transmitter Approved (Annex B)20P2311 Differential Pressure Transmitter With Diaphragm Seals Approved (Annex B)20P2401 Pressure Switch w/wo Transmitter Approved (Annex B)20P2501 Differential Pressure Switch w/wo Transmitter Approved (Annex B)

Pressure Safety Devices

20P2901 Rupture Disk In process

20P2911 Pressure Relief Tank Vent

20P2921 Pressure Safety or Relief Valve In process

21 ISATR20.00.012001

Table A.2 Device specification categories and form titles (cont'd)Receiver Devices

20R2011 Annunciator

20R2111 Controller

20R2121 Local Controller w/wo Recorder

20R2201 Receiver Gauge Approved (Annex B)20R2211 Indicator

20R2221 Local Indicator w/wo Recorder

20R2231 Totalizer Indicator

20R2241 Digital Meter

20R2311 Analog Recorder

20R2411 Digital Recorder

Temperature Devices

20T2001 Bimetallic Thermometer w/wo Thermowell Approved (Annex B)20T2101 Filled-System Thermometer Assembly w/wo Thermowell Approved (Annex B)20T2111 Filled-System Temperature Switch w/wo Thermowell Approved (Annex B)20T2121 Filled-System Temperature Transmitter w/wo Thermowell Approved (Annex B)20T2201 RTD Assembly w/wo Thermowell Approved (Annex B)20T2221 RTD/Thermocouple Temperature Transmitter or Switch Approved (Annex B)20T2301 Thermocouple Assembly w/wo Thermowell Approved (Annex B)20T2401 Thermal Radiation Temperature Sensor w/wo Monitor Approved (Annex B)20T2501 Thermowell or Protecting Tube Assembly Approved (Annex B)

Vibration or Mechanical Analysis Devices

20V2111 Vibration Switch

20V2211 Vibration Monitor

20V2311 Mechanical Analysis Monitor

Weight Devices

20W2011 Electronic Weight Scale

20W2111 Strain Gage Weight Indicator

20W2211 Load Cell Weight Transmitter

20W2221 Strain Gage Weight Transmitter

Relay or Compute or Converter Devices

20Y2011 Transducer

20Y2111 Barrier or Isolator

20Y2211 Signal Converter

20Y2311 Analog Signal Switch

20Y2411 Solenoid or Pilot Valve

ISATR20.00.012001 22

Table A.2 Device specification categories and form titles (cont'd)Position Devices

20Z2011 Mechanical Limit Switch

20Z2021 Proximity Switch

20Z2111 Position Transmitter

Table A.3- General or special requirements form title

Form Number Form Title Development Status,ISA-SP20

20G3001 General or Special Requirements Approved (Annex B)

23 ISATR20.00.012001

Annex B (informative) Approved specification forms

Following are the approved specification forms, as of the date of this publication.

Form: 20C1001 Rev 0 2001 ISA

1 RESPONSIBLE ORGANIZATION VALVE OR REGULATOR DEVICE 6 SPECIFICATION IDENTIFICATIONS2 7 Document no3 Operating Parameters 8 Latest revision Date4 9 Issue status5 10

11 ADMINISTRATIVE IDENTIFICATIONS 40 SERVICE IDENTIFICATIONS Continued12 Project number Sub project no 41 Inline hazardous area cl Div/Zone Group13 Project 42 Inline area min ign temp Temp ident number14 Enterprise 43 Remote hazardous area cl Div/Zone Group15 Site 44 Remote area min ign temp Temp ident number16 Area Cell Unit 4517 4618 SERVICE IDENTIFICATIONS 47 COMPONENT DESIGN CRITERIA19 Tag no/Functional ident 48 Component type20 Related equipment 49 Component style

Service 50 Input signal type2122 51 Flow characteristic23 P&ID/Reference dwg number 52 Min seat leakage class24 Upstr line/nozzle number 53 Max stem leakage rate25 Upstream line pipe spec 54 Type of protection26 Upstr line nominal size Rating 55 Criticality code27 Upstr line conn type Style 56 Max EMI susceptibility Ref28 Upstr line schedule no Wall thickness 57 Min xdcr reqd accuracy Ref29 Upstr conn orientation 58 Max offset/propn band30 Upstr line material type 59 Actuator sizing factor31 Connection design code 60 Avail nom power supply Number wires32 Dnstr line/nozzle number 61 Available nom air supply33 Downstream line pipe spec 62 Testing/Listing agency34 Dnstr line nominal size Rating 63 Test requirements35 Dnstr line conn type Style 64 Supply loss failure mode36 Dnstr line schedule no Wall thickness 65 Signal loss failure mode37 Dnstr conn orientation 6638 Dnstr line material type 6739 Dnstr insulation atten 6869 PROCESS VARIABLES MATERIAL FLOW CONDITIONS 101 PROCESS DESIGN CONDITIONS70 Flow Case Identification Units 102 Minimum Maximum Units71 Inlet pressure 10372 Outlet pressure 10473 Inlet temperature 10574 Inlet phase type 10675 Mass fraction vapor 10776 Total mass flow rate 10877 Liquid mass flow rate 10978 Liquid actual flow rate 11079 Liquid standard flow rate 11180 Liquid density 11281 Liquid specific gravity 11382 Liquid viscosity 11483 Absolute vapor pressure 11584 Vapor mass flow rate 11685 Vapor actual flow rate 11786 Vapor standard flow rate 11887 Vapor density 11988 Vapor specific gravity 12089 Vapor molecular weight 12190 Vapor viscosity 12291 Inlet compressibility 12392 12493 CALCULATED VARIABLES 12594 Pressure differential 12695 Total system press drop 12796 Calculated flow coef 12897 Calculated travel 12998 Calculated travel time 13099 Calculated SPL 131

100 132133 MATERIAL PROPERTIES 138 MATERIAL PROPERTIES Continued134 Name 139 Abs critical pressure135 Composition 140 Critical temperature136 Density at ref temp At 141 NFPA health hazard Flammability Reactivity137 Ratio sp heat capacity 142

Rev Date Revision Description By Appv1 Appv2 Appv3 REMARKS

Form: 20F1001 Rev 0 2001 ISA

1 RESPONSIBLE ORGANIZATION FLOW DEVICE 6 SPECIFICATION IDENTIFICATIONS2 7 Document no3 Operating Parameters 8 Latest revision Date4 9 Issue status5 10

11 ADMINISTRATIVE IDENTIFICATIONS 40 SERVICE IDENTIFICATIONS Continued12 Project number Sub project no 41 Inline hazardous area cl Div/Zone Group13 Project 42 Inline area min ign temp Temp ident number14 Enterprise 43 Remote hazardous area cl Div/Zone Group15 Site 44 Remote area min ign temp Temp ident number16 Area Cell Unit 4517 4618 SERVICE IDENTIFICATIONS 47 COMPONENT DESIGN CRITERIA19 Tag no/Functional ident 48 Component type20 Related equipment 49 Component style

Service 50 Output signal type2122 51 Characteristic curve23 P&ID/Reference dwg number 52 Compensation style24 Upstr line/nozzle number 53 Type of protection25 Upstream line pipe spec 54 Criticality code26 Upstr line nominal size Rating 55 Max EMI susceptibility Ref27 Upstr line conn type Style 56 Max temperature effect28 Upstr line schedule no Wall thickness 57 Min diameter ratio (d/D) Max29 Upstr conn orientation 58 Max response time30 Upstr line material type 59 Min required accuracy Ref31 Connection design code 60 Avail nom power supply Number wires32 Dnstr line/nozzle number 61 Min load capability33 Downstream line pipe spec 62 Testing/Listing agency34 Dnstr line nominal size Rating 63 Test requirements35 Dnstr line conn type Style 64 Supply loss failure mode36 Dnstr line schedule no Wall thickness 65 Signal loss failure mode37 Dnstr conn orientation 6638 Dnstr line material type 6739 Avail upstr straight lg Dnstr lg 6869 PROCESS VARIABLES MATERIAL FLOW CONDITIONS 101 PROCESS DESIGN CONDITIONS70 Flow Case Identification Units 102 Minimum Maximum Units71 Inlet pressure 10372 Outlet pressure 10473 Inlet temperature 10574 Inlet phase type 10675 Mass fraction vapor 10776 Total mass flow rate 10877 Liquid mass flow rate 10978 Liquid actual flow rate 11079 Liquid standard flow rate 11180 Liquid density 11281 Liquid specific gravity 11382 Liquid viscosity 11483 Absolute vapor pressure 11584 Vapor mass flow rate 11685 Vapor actual flow rate 11786 Vapor standard flow rate 11887 Vapor density 11988 Vapor specific gravity 12089 Vapor molecular weight 12190 Vapor viscosity 12291 Inlet compressibility 12392 12493 CALCULATED VARIABLES 12594 Pressure differential 12695 Perm pressure drop 12796 Line fluid velocity 12897 Line Reynolds number 12998 Calculated uncertainty 13099 131

132 MATERIAL PROPERTIES 138 MATERIAL PROPERTIES Continued133 Name 139 Abs critical pressure134 Composition 140 Critical temperature135 Density at ref temp At 141 NFPA health hazard Flammability Reactivity136 Ratio sp heat capacity 142137 Conductivity 143

Rev Date Revision Description By Appv1 Appv2 Appv3 REMARKS

Form: 20L1001 Rev 0 2001 ISA

1 RESPONSIBLE ORGANIZATION LEVEL DEVICE 6 SPECIFICATION IDENTIFICATIONS2 7 Document no3 Operating Parameters 8 Latest revision Date4 9 Issue status5 10

11 ADMINISTRATIVE IDENTIFICATIONS 43 SERVICE IDENTIFICATIONS Continued12 Project number Sub project no 44 Process conn diff height13 Project 45 Zero datum height14 Enterprise 46 Turbulence intensity15 Site 47 Inline hazardous area cl Div/Zone Group16 Area Cell Unit 48 Inline area min ign temp Temp ident number17 49 Remote hazardous area cl Div/Zone Group18 SERVICE IDENTIFICATIONS 50 Remote area min ign temp Temp ident number19 Tag no/Functional ident 5120 Related equipment 5221 Service 5322 54 COMPONENT DESIGN CRITERIA23 P&ID/Reference dwg number 55 Component type24 Upper conn nozzle number 56 Component style25 Upper conn pipe spec 57 Output signal type26 Upper conn nominal size Rating 58 Characteristic curve27 Upper conn termn type Style 59 Compensation required28 Upper conn schedule no Wall thickness 60 Type of protection29 Upper conn length 61 Criticality code30 Upper conn orientation 62 Max EMI susceptibility Ref31 Upper conn material type 63 Max temperature effect Ref32 Connection design code 64 Max response time33 Lower conn nozzle number 65 Min required accuracy Ref34 Lower conn pipe spec 66 Max dead band35 Lower conn nominal size Rating 67 Avail nom power supply Number wires36 Lower conn termn type Style 68 Min load capability37 Lower conn schedule no Wall thickness 69 Testing/Listing agency38 Lower conn length 70 Test requirements39 Lower conn orientation 71 Supply loss failure mode40 Lower conn material type 72 Signal loss failure mode41 Device insertion length 7342 Vessel nominal diameter Height 7475 PROCESS VARIABLES PROCESS DESIGN CONDITIONS76 Condition Identification Minimum Normal Maximum Units77 Pressure78 Temperature79 Lower material phase type80 Lower material density81 Lower material sp gr82 Lower material viscosity83 Lower material level84 Upper material phase type85 Upper material density86 Upper material sp gr87 Upper material viscosity88 Upper material level89 Max material buildup thkns90 Solids concentration91 Moisture content92 Max angle of repose93 Particle size949596 CALCULATED VARIABLES97 Calc zero el/suppr98 Calc measurement span99

100101 MATERIAL PROPERTIES 109 MATERIAL PROPERTIES Continued102 Lower material name 110 Upper material name103 Lower matl composition 111 Upper matl composition104 Lower matl density at ref At 112 Upper matl density at ref At105 Lower dielectric constant At temp 113 Upper dielectric constant At temp106 Lower material Color 114 Upper material Color107 Lower NFPA health hazard Flammability Reactivity 115 Upper NFPA health hazard Flammability Reactivity108 116

Rev Date Revision Description By Appv1 Appv2 Appv3 REMARKS

Form: 20P1001 Rev 0 2001 ISA

1 RESPONSIBLE ORGANIZATION PRESSURE OR DIFFERENTIAL 6 SPECIFICATION IDENTIFICATIONS2 PRESSURE DEVICE 7 Document no3 Operating Parameters 8 Latest revision Date4 9 Issue status5 10

11 ADMINISTRATIVE IDENTIFICATIONS 42 SERVICE IDENTIFICATIONS Continued12 Project number Sub project no 43 Process conn diff length13 Project 44 Zero datum conn length14 Enterprise 45 Inline hazardous area cl Div/Zone Group15 Site 46 Inline area min ign temp Temp ident number16 Area Cell Unit 47 Remote hazardous area cl Div/Zone Group17 48 Remote area min ign temp Temp ident number18 SERVICE IDENTIFICATIONS 4919 Tag no/Functional ident 5020 Related equipment 51

Service 52 COMPONENT DESIGN CRITERIA2122 53 Component type23 P&ID/Reference dwg number 54 Component style24 High side line/nozzle no 55 Output signal type25 High side conn pipe spec 56 Characteristic curve26 High side conn nom size Rating 57 Type of protection27 High side conn termn type Style 58 Criticality code28 High side conn schedule Wall thickness 59 Max EMI susceptibility29 High side conn length 60 Max temperature effect30 High side conn orient 61 Max response time31 High side conn matl type 62 Min required accuracy Ref32 Connection design code 63 Max dead band33 Low side line/nozzle no 64 Avail nom power supply Number wires34 Low side conn pipe spec 65 Min load capability35 Low side conn nom size Rating 66 Testing/Listing agency36 Low side conn termn type Style 67 Test requirements37 Low side conn schedule no Wall thickness 68 Supply loss failure mode38 Low side conn length 69 Signal loss failure mode39 Low side conn orientation 7040 Low side conn matl type 7141 Device insertion length 7273 PROCESS VARIABLES PROCESS DESIGN CONDITIONS74 Condition Identification Minimum Normal Maximum Units75 High side pressure76 Low side pressure77 High side temperature78 Low side temperature79 High side matl phase type80 High side material viscosity81 Low side matl phase type82 Low side material viscosity83 Differential pressure84858687888990919293949596 CALCULATED VARIABLES97 Calc zero el / suppr98 Calc measurement span99

100101102 MATERIAL PROPERTIES 108 MATERIAL PROPERTIES Continued103 Low side material name 109 High side material name104 Low side composition 110 High side composition105 Low side density at ref At 111 High side density at ref At106 Low side NFPA health haz Flammability Reactivity 112 High side NFPA health haz Flammability Reactivity107 113

Rev Date Revision Description By Appv1 Appv2 Appv3 REMARKS

Form: 20T1001 Rev 0 2001 ISA

1 RESPONSIBLE ORGANIZATION TEMPERATURE DEVICE 6 SPECIFICATION IDENTIFICATIONS2 7 Document no3 Operating Parameters 8 Latest revision Date4 9 Issue status5 10

11 ADMINISTRATIVE IDENTIFICATIONS 39 SERVICE IDENTIFICATIONS Continued12 Project number Sub project no 40 Inline hazardous area cl Div/Zone Group13 Project 41 Inline area min ign temp Temp ident number14 Enterprise 42 Remote hazardous area cl Div/Zone Group15 Site 43 Remote area min ign temp Temp ident number16 Area Cell Unit 4417 4518 SERVICE IDENTIFICATIONS 46 COMPONENT DESIGN CRITERIA19 Tag no/Functional ident 47 Component type20 Related equipment 48 Component style

Service Output signal type2122

4950 Characteristic curve

23 P&ID/Reference dwg number 51 Type of protection24 Line/Nozzle number 52 Criticality code25 Process conn pipe spec 53 Max EMI susceptibility Ref26 Line/Nozzle nominal size Rating 54 Max temperature effect Ref27 Process conn termn type Style 55 Max response time28 Line/Nozzle schedule no Wall thickness 56 Min required accuracy Ref29 Connection length 57 Max dead band30 Connection orientation 58 Avail nom power supply Number wires31 Connection material type 59 Minimum load capability32 Connection design code 60 Testing/Listing agency33 Insulation thickness 61 Test requirements34 Device insertion length 62 Supply loss failure mode35 63 Signal loss failure mode36 6437 6538 6667 PROCESS VARIABLES MATERIAL FLOW CONDITIONS 100 PROCESS DESIGN CONDITIONS68 Flow Case Identification Units 101 Minimum Maximum Units69 Pressure 10270 Temperature 10371 Phase type 10472 Total mass flow rate 10573 Liquid mass flow rate 10674 Liquid actual flow rate 10775 Liquid standard flow rate 10876 Liquid density 10977 Liquid specific gravity 11078 Liquid viscosity 11179 Vapor mass flow rate 11280 Vapor actual flow rate 11381 Vapor standard flow rate 11482 Vapor density 11583 Vapor specific gravity 11684 Vapor molecular weight 11785 11886 11987 12088 12189 12290 12391 12492 12593 CALCULATED VARIABLES 12694 Line fluid velocity 12795 Line Reynolds number 12896 Wake/natural freq ratio 12997 13098 13199 132

133 MATERIAL PROPERTIES 138 MATERIAL PROPERTIES Continued134 Name 139 Ratio sp heat factor135 Composition 140 Emissivity136 Density at ref temp At 141 NFPA health hazard Flammability Reactivity137 Ratio sp heat capacity 142

Rev Date Revision Description By Appv1 Appv2 Appv3 REMARKS

Form: 20C2001 Rev 0 2001 ISA

1 RESPONSIBLE ORGANIZATION LINEAR MOTION TYPE 6 SPECIFICATION IDENTIFICATIONS2 CONTROL VALVE ASSEMBLY 7 Document no3 Device Specification 8 Latest revision Date4 9 Issue status5 10

11 VALVE BODY AND BONNET 60 SIGNAL TRANSDUCER continued12 Body type 61 Enclosure type no/class13 Bonnet style 62 Digital communication std14 Inlet conn nominal size Rating 63 Signal power source15 Outlet conn nominal size Rating 64 Pressure gauges16 End conn termn type Style 65 Cert/Approval type17 Flange facing finish 66 Mounting location/type18 Stem seal type 67 Enclosure material19 Face-to-face standard 6820 Yoke boss diameter 69 POSITIONER OR CONTROLLER21 Body and bonnet material 70 Configuration type22 Lining material 71 Input signal type23 Body/Bonnet bolting matl 72 Enclosure type no/class24 Packing flg bolting matl 73 Signal power source25 Gasket material 74 Digital communication std26 Packing material 75 Cert/Approval type27 Bellows seal material 76 Pressure gauges28 77 By-pass manifold29 VALVE TRIM 78 Enclosure material30 Closure member type 7931 Trim style 80 PERFORMANCE CHARACTERISTICS32 Inherent characteristic 81 Max press at design temp At33 Seat ring type 82 Min working temperature Max34 Flow direction force 83 Max pressure drop35 Port/Orifice diameter 84 Rated flow coef type Coef Xt36 Stem diameter Rt travel 85 Rated factor Fl Sigma mr37 Closure member material 86 Rated seat leakage class38 Seat ring material 8739 Stem material 88 ACCESSORIES40 Cage material 89 Air set filter style41 Guide/Retainer material 90 Air set gauges42 Guide bushing material 91 Tubing nominal size43 Hard facing/coating 92 Tubing and fitting matl44 9345 ACTUATOR 94 SPECIAL REQUIREMENTS46 Actuator type 95 Custom tag47 Acting style 96 Reference specification48 Effective area 97 Special preparation49 Bench set LRL URL 98 Compliance standard50 Max supply capability 99 Construction code51 Handwheel type/position 100 Software configuration52 Casing/cylinder material 10153 Diaphragm/O ring matl 102 PHYSICAL DATA54 Yoke material 103 Estimated weight55 104 Face-to-face dimension56 SIGNAL TRANSDUCER 105 Overall height57 Input signal type 106 Removal clearance58 Output signal type 107 Mfr reference dwg59 Accuracy rating 108

110 CALIBRATIONS AND TEST INPUT OR TEST OUTPUT111 TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST LRV URV ACTION LRV URV112 Bench set-Travel113 Positioner input-Travel114 Transducer input-Output115 Test pressure116117118 COMPONENT IDENTIFICATIONS119 COMPONENT TYPE MANUFACTURER MODEL NUMBER120121122123124125Rev Date Revision Description By Appv1 Appv2 Appv3 REMARKS

Form: 20C2002 Rev 0 2001 ISA

1 RESPONSIBLE ORGANIZATION LINEAR MOTION TYPE 6 SPECIFICATION IDENTIFICATIONS2 CONTROL VALVE AUXILIARIES 7 Document no3 Device Specification 8 Latest revision Date:4 9 Issue status5 10

11 POSITION SWITCHES 60 POSITION TRANSMITTER continued12 Housing type 61 Integral indicator style13 Sensor style 62 Signal termination type14 Output signal type 63 Cert/Approval type15 Enclosure type no/class 64 Mounting location/type16 Contacts ac rating At Max 65 Enclosure material17 Contacts dc rating At Max 6618 Contacts arrangement Quantity 6719 Integral indicator style 68 SUPPLY PRESSURE TRIP VALVE20 Signal termination type 69 Configuration type21 Cert/Approval type 70 Volume tank size22 Mounting location/type 71 Trip set pressure reset23 Enclosure material 72 Tank max working pressure24 Shaft material 73 Min supply capability Max25 Bushing material 74 Trip set pressure LRL URL26 Fastener material 75 Construction code27 Gasket/O ring material 76 Mounting location/type28 77 Body material29 78 Diaphragm/O ring material30 SOLENOID OR PILOT VALVE 7931 Body type 80 EMISSIONS MONITOR SWITCH32 Enclosure style 81 Sensor type33 Inlet conn nominal size Style 82 Housing type34 Coil watt rating 83 Inlet conn nominal size Style35 Coil insulation class 84 Output signal type36 Enclosure type no/class 85 Enclosure type no/class37 Min operating press diff Max 86 Contacts ac rating At Max38 Signal power source 87 Contacts dc rating At Max39 Manual operator type 88 Contacts arrangement40 Type of actuation 89 Integral indicator style41 Coil type 90 Signal termination type42 Operation style 91 Cert/Approval type43 Press port orifice size Exhaust port 92 Mounting location/type44 Signal termination type 93 Enclosure material45 Cert/Approval type 94 Diaphragm material46 Mounting location/type 9547 Enclosure material 9648 Body material 97 BOOSTER RELAY49 Seat/Disc/Diaphragm matl 98 Configuration type50 99 End conn nominal size Style51 100 Dead band rating52 POSITION TRANSMITTER 101 Max supply capability53 Housing type 102 Supply port size Exh port54 Sensor style 103 Body material55 Output signal type 104 Closure member matl56 Accuracy/Linearity rating 105 Diaphragm material57 Enclosure type no/class 106 Test conn material58 Digital communication std 107 Gasket/O ring material59 Signal power source 108

110 CALIBRATIONS AND TEST INPUT OR SETPOINT OUTPUT111 TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST LRV URV ACTION LRV URV112 Position-Analog output113 Solenoid energized-Output114 Position setpoint-Output115 Supply setpointOutput116 Emissions setpointOutput117118 COMPONENT IDENTIFICATIONS119 COMPONENT TYPE MANUFACTURER MODEL NUMBER120 Position transmitter121 Solenoid/Pilot valve122 Position switch123 Supply press trip valve124 Emissions monitor125 Booster relayRev Date Revision Description By Appv1 Appv2 Appv3 REMARKS

Form: 20C2011 Rev 0 2001 ISA

1 RESPONSIBLE ORGANIZATION ROTARY MOTION TYPE 6 SPECIFICATION IDENTIFICATIONS2 CONTROL VALVE ASSEMBLY 7 Document no3 Device Specification 8 Latest revision Date4 9 Issue status5 10

11 VALVE BODY AND BONNET 60 SIGNAL TRANSDUCER continued12 Body type 61 Enclosure type no/class13 Bonnet style 62 Digital communication std14 Inlet conn nominal size Rating 63 Signal power source15 Outlet conn nominal size Rating 64 Pressure gauges16 End conn termn type Style 65 Cert/Approval type17 Flange facing finish 66 Mounting location/type18 Shaft seal type 67 Enclosure material19 Face-to-face standard 6820 Yoke boss diameter 69 POSITIONER OR CONTROLLER21 Body and bonnet material 70 Configuration type22 Lining material 71 Input signal type23 Body/Bonnet bolting matl 72 Enclosure type no/class24 Packing flg bolting matl 73 Signal power source25 Gasket material 74 Digital communication std26 Packing material 75 Cert/Approval type27 76 Pressure gauges28 77 By-pass manifold29 VALVE TRIM 78 Enclosure material30 Closure member type 7931 Trim style 80 PERFORMANCE CHARACTERISTICS32 Inherent characteristic 81 Max press at design temp At33 Seal ring type 82 Min working temperature Max34 Flow direction force 83 Max pressure drop35 Shaft diameter Rated travel 84 Rated flow coef type Coef Xt36 Closure member material 85 Rated factor Fl Sigma mr37 Seal ring material 86 Rated seat leakage class38 Shaft material 8739 Flow ring material 88 ACCESSORIES40 Guide/Retainer material 89 Air set filter style41 Guide bushing material 90 Air set gauges42 Hard facing/coating 91 Tubing nominal size43 92 Tubing and fitting matl44 9345 ACTUATOR 94 SPECIAL REQUIREMENTS46 Actuator type 95 Custom tag47 Effective area 96 Reference specification48 Bench set LRL URL 97 Special preparation49 Max supply capability 98 Compliance standard50 Handwheel type/position 99 Construction code51 Mounting orientation 100 Software configuration52 Casing/cylinder material 10153 Diaphragm/O ring matl 102 PHYSICAL DATA54 Yoke material 103 Estimated weight55 104 Face-to-Face dimension56 SIGNAL TRANSDUCER 105 Overall height57 Input signal type 106 Removal clearance58 Output signal type 107 Mfr reference dwg59 Accuracy rating 108

110 CALIBRATIONS AND TEST INPUT OR TEST OUTPUT111 TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST LRV URV ACTION LRV URV112 Bench set-Travel113 Positioner input-Travel114 Transducer input-Output115 Test pressure116117118 COMPONENT IDENTIFICATIONS119 COMPONENT TYPE MANUFACTURER MODEL NUMBER120121122123124125Rev Date Revision Description By Appv1 Appv2 Appv3 REMARKS

Form: 20C2012 Rev 0 2001 ISA

1 RESPONSIBLE ORGANIZATION ROTARY MOTION TYPE 6 SPECIFICATION IDENTIFICATIONS2 CONTROL VALVE AUXILIARIES 7 Document no3 Device Specification 8 Latest revision Date4 9 Issue status5 10

11 POSITION SWITCHES 60 POSITION TRANSMITTER continued12 Housing type 61 Integral indicator style13 Sensor style 62 Signal termination type14 Output signal type 63 Cert/Approval type15 Enclosure type no/class 64 Mounting location/type16 Contacts ac rating At Max 65 Enclosure material17 Contacts dc rating At Max 6618 Contacts arrangement Quantity 6719 Integral indicator style 68 SUPPLY PRESSURE TRIP VALVE20 Signal termination type 69 Configuration type21 Cert/Approval type 70 Volume tank size22 Mounting location/type 71 Trip set pressure reset23 Enclosure material 72 Tank max working pressure24 Shaft material 73 Min supply capability Max25 Bushing material 74 Trip set pressure LRL URL26 Fastener material 75 Construction code27 Gasket/O ring material 76 Mounting location/type28 77 Body material29 78 Diaphragm/O ring material30 SOLENOID OR PILOT VALVE 7931 Body type 80 EMISSIONS MONITOR SWITCH32 Enclosure style 81 Sensor type33 Inlet conn nominal size Style 82 Housing type34 Coil watt rating 83 Inlet conn nominal size Style35 Coil insulation class 84 Output signal type36 Enclosure type no/class 85 Enclosure type no/class37 Min operating press diff Max 86 Contacts ac rating At Max38 Signal power source 87 Contacts dc rating At Max39 Manual operator type 88 Contacts arrangement40 Type of actuation 89 Integral indicator style41 Coil type 90 Signal termination type42 Operation style 91 Cert/Approval type43 Press port orifice size Exhaust port 92 Mounting location/type44 Signal termination type 93 Enclosure material45 Cert/Approval type 94 Diaphragm material46 Mounting location/type 9547 Enclosure material 9648 Body material 97 BOOSTER RELAY49 Seat/Disc/Diaphragm matl 98 Configuration type50 99 End conn nominal size Style51 100 Dead band rating52 POSITION TRANSMITTER 101 Max supply capability53 Housing type 102 Supply port size Exh port54 Sensor style 103 Body material55 Output signal type 104 Closure member matl56 Accuracy/Linearity rating 105 Diaphragm material57 Enclosure type no/class 106 Test conn material58 Digital communication std 107 Gasket/O ring material59 Signal power source 108

110 CALIBRATIONS AND TEST INPUT OR SETPOINT OUTPUT111 TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST LRV URV ACTION LRV URV112 Position-Analog output113 Solenoid energized-Output114 Position setpoint-Output115 Supply setpoint-Output116 Emissions setpoint-Output117118 COMPONENT IDENTIFICATIONS119 COMPONENT TYPE MANUFACTURER MODEL NUMBER120 Position transmitter121 Solenoid/Pilot valve122 Position switch123 Supply press trip valve124 Emissions monitor125 Booster relayRev Date Revision Description By Appv1 Appv2 Appv3 REMARKS

Form: 20F2021 Rev 0 2001 ISA

1 RESPONSIBLE ORGANIZATION FLOW NOZZLE 6 SPECIFICATION IDENTIFICATIONS2 w/wo METER TUBE 7 Document no3 Device Specification 8 Latest revision Date4 9 Issue status5 10

11 BODY 60 PERFORMANCE CHARACTERISTICS12 Body type 61 Max press at design temp At13 Fabrication style 62 Min working temperature Max14 Process conn nominal size Rating 63 Uncalibrated accuracy15 End conn termn type Style 64 Perm head loss at URL16 Flange facing finish 6517 Pressure tap quantity 6618 Press tap conn nom size Style 6719 Stampings 6820 Nozzle material 6921 7022 7123 7224 THROAT 7325 Diameter ratio (Beta d/D) 7426 Throat diameter 7527 7628 7729 7830 METER TUBE 7931 Bore type 8032 End conn nominal size Rating 8133 End conn termn type Style 8234 Flange facing finish 8335 Upstream length 8436 Pipe schedule no 85 ACCESSORIES37 Downstream length 86 Purge system38 Coupling quantity 8739 Coupling nominal size Rating 8840 Coupling locations 8941 Internal bore diameter 9042 Flow straightener type 9143 Pipe/Tube material 92 SPECIAL REQUIREMENTS44 Flow straightener matl 93 Custom tag45 Bolting material 94 Reference specification46 Exterior coating material 95 Special preparation47 End termination material 96 Compliance standard48 Gasket material 97 Construction code49 Diffuser cone material 98 Calibration report50 99 Weld radiographs51 10052 101 PHYSICAL DATA53 102 Estimated weight54 103 Face-to-face dimension55 104 Removal clearance56 105 Mfr reference dwg57 10658 10759 108

110 CALIBRATIONS AND TEST INPUT OR TEST OUTPUT111 TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST LRV URV LRV URV112 Flow rateDiff pressure113 Test pressure114115116117118 COMPONENT IDENTIFICATIONS119 COMPONENT TYPE MANUFACTURER MODEL NUMBER120121122123124125

Rev Date Revision Description By Appv1 Appv2 Appv3 REMARKS

Form: 20F2031Rev 0 2001 ISA

1 RESPONSIBLE ORGANIZATION ORIFICE PLATE 6 SPECIFICATION IDENTIFICATIONS2 7 Document no3 Device Specification 8 Latest revision Date4 9 Issue status5 10

11 ORIFICE PLATE AND HOLDER 60 ACCESSORIES12 Plate type 61 Orifice holding block13 Holder/Seal unit style 62 Gasket set14 Nominal size 6315 API ring no 6416 Orifice flange nom rating 6517 Orifice bore type 66 SPECIAL REQUIREMENTS18 Orifice inlet edge style 67 Custom tag19 Diameter ratio (Beta d/D) 68 Reference specification20 Orifice bore diameter 69 Special preparation21 Plate outside diameter 70 Compliance standard22 Plate thickness 71 Calculation report23 Vent/Drain hole size 7224 Vent/Drain hole location 7325 Stampings required 74 PHYSICAL DATA26 Plate material 75 Estimated weight27 Seal material 76 Removal clearance28 Holder/Ring material 77 Mfr reference dwg29 7830 7931 8032 8133 8234 8335 8436 8537 8638 8739 8840 8941 9042 9143 9244 9345 9446 9547 9648 9749 9850 9951 10052 10153 10254 10355 10456 10557 10658 10759 108

110 CALIBRATIONS AND TEST INPUT OUTPUT111 TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST LRV URV LRV URV112 Flow rate-Diff pressure113114115116117118 COMPONENT IDENTIFICATIONS119 COMPONENT TYPE MANUFACTURER MODEL NUMBER120121122123124125Rev Date Revision Description By Appv1 Appv2 Appv3 REMARKS

Form: 20F2041 Rev 0 2001 ISA

1 RESPONSIBLE ORGANIZATION ORIFICE PLATE ASSEMBLY 6 SPECIFICATION IDENTIFICATIONS2 w/wo METER TUBE 7 Document no3 Device Specification 8 Latest revision Date4 9 Issue status5 10

11 ORIFICE FLANGE OR FITTING 60 METER TUBE Continued12 Flange/Fitting type 61 Coupling locations13 Pressure tap style 62 Internal bore diameter14 End conn nominal size Rating 63 Flow straightener type15 End conn termn type Style 64 Pipe/Tube material16 Flange facing finish 65 Bolting material17 End conn schedule no 66 Exterior coating material18 Press tap conn nom size Style 67 End termination material19 Pressure tap orientation 68 Gasket material20 Tap connection plug type 6921 Centering/Dowel pins 7022 Jack screw material 7123 Flange/Fitting material 72 PERFORMANCE CHARACTERISTICS24 Trim material 73 Max press at design temp At25 Bolting material 74 Min working temperature Max26 Gasket material 7527 Lubrication material 7628 7729 7830 7931 ORIFICE PLATE AND HOLDER 8032 Plate type 8133 Holder/Seal unit style 8234 API ring no Rating 8335 Orifice bore type 84 ACCESSORIES36 Orifice inlet edge style 85 Orifice holding blocks37 Diameter ratio (Beta d/D) 8638 Orifice bore diameter 8739 Plate outside diameter 8840 Plate thickness 8941 Vent/Drain hole size 9042 Vent/Drain hole location 91 SPECIAL REQUIREMENTS43 Stampings 92 Custom tag44 Plate material 93 Reference specification45 Seal material 94 Special preparation46 Holder/Ring material 95 Compliance standard47 96 Construction code48 9749 9850 METER TUBE 9951 Bore type 100 PHYSICAL DATA52 End conn nominal size Rating 101 Estimated weight53 End conn termn category Style 102 Face-to-face dimension54 Flange facing finish 103 Overall height55 Upstream length 104 Removal clearance56 Pipe schedule no 105 Mfr reference dwg57 Downstream length 10658 Coupling quantity 10759 Coupling nominal size Rating 108

110 CALIBRATIONS AND TEST INPUT OR TEST OUTPUT111 TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST LRV URV LRV URV112 Flow rate Diff pressure113 Test pressure114115116117118 COMPONENT IDENTIFICATIONS119 COMPONENT TYPE MANUFACTURER MODEL NUMBER120121122123124125Rev Date Revision Description By Appv1 Appv2 Appv3 REMARKS

Form: 20F2051 Rev 0 2001 ISA

1 RESPONSIBLE ORGANIZATION MULTIVARIABLE FLOW TRANSMITTER 6 SPECIFICATION IDENTIFICATIONS2 7 Document no3 Device Specification 8 Latest revision Date4 9 Issue status5 10

11 TRANSMITTER BODY 60 PERFORMANCE CHARACTERISTICS12 Body/Flange type 61 Max press at design temp At13 Process conn nominal size Rating 62 Min working temp Max14 Process conn termn type Style 63 Diff press accuracy rating15 Vent/Drain location 64 Press accuracy rating16 Mounting type 65 Temp accuracy rating17 Body/Flange material 66 Diff press LRL URL18 Vent/Drain material 67 Press Lower Range-limit URL19 Bolting material 68 Fill fluid sp gr At temp20 Flange adapter material 69 Min ambient working temp Max21 Gasket/O ring material 7022 Mounting kit material 7123 7224 7325 7426 SENSING ELEMENT 7527 Detector type 7628 Min diff pressure span Max 7729 Min pressure span Max 7830 Temp input signal 7931 Diaphragm/Wetted material 8032 Fill fluid material 8133 8234 83 ACCESSORIES35 84 Remote indicator style36 TRANSMITTER 85 Heating kit style37 Output signal type 86 Manifold valve style38 Enclosure type no/class 87 Manifold material39 Characteristic curve 8840 Digital communication std 8941 Signal power source 90 SPECIAL REQUIREMENTS42 Transient protection 91 Custom tag43 Integral indicator style 92 Reference specification44 Signal termination type 93 Special preparation45 Cert/Approval type 94 Compliance standard46 Span-Zero adjust lct 95 Calibration report47 Failure/Diagnostic action 96 Software configuration48 Enclosure material 9749 9850 9951 100 PHYSICAL DATA52 101 Estimated weight53 102 Overall height54 103 Removal clearance55 104 Signal conn nominal size Style56 105 Mfr reference dwg57 10658 10759 108

110 CALIBRATIONS AND TEST INPUT OR TEST OUTPUT OR SCALE111 TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/SCALE LRV URV ACTION LRV URV112 Flow rate-Analog output113 Flow rate-Scale114 Diff Press-Digital output115 Press-Digital output116 Temp-Digital output117 Flow rate-Digital output118 COMPONENT IDENTIFICATIONS119 COMPONENT TYPE MANUFACTURER MODEL NUMBER120121122123124125

Rev Date Revision Description By Appv1 Appv2 Appv3 REMARKS

Form: 20F2111 Rev 0 2001 ISA

1 RESPONSIBLE ORGANIZATION VENTURI OR FLOW TUBE 6 SPECIFICATION IDENTIFICATIONS2 w/wo METER TUBE 7 Document no3 Device Specification 8 Latest revision Date4 9 Issue status5 10

11 BODY OR TUBE 60 PERFORMANCE CHARACTERISTICS12 Tube form 61 Max press at design temp At13 Fabrication style 62 Min working temperature Max14 Inlet conn nominal size Rating 63 Uncalibrated accuracy15 Outlet conn nominal size Rating 64 Perm head loss at URL16 End conn termn type Style 6517 Flange facing finish 6618 Pressure tap quantity 6719 Press tap conn nom size Rating 6820 Press tap conn type Style 6921 Press tap orientation 7022 Body/Tube material 7123 Bolting material 7224 Exterior coating material 7325 End termination material 7426 Gasket material 7527 7628 7729 7830 THROAT 7931 Mounting type 8032 Diameter ratio (beta d/D) 8133 Throat diameter 8234 Cone material 8335 Throat material 8436 85 ACCESSORIES37 86 Purge system38 87 Cleaner style39 METER TUBE 88 Valve style40 Bore type 89 Valves and Nipple matl41 End conn nominal size Rating 9042 End conn termn type Style 9143 Flange facing finish 92 SPECIAL REQUIREMENTS44 Upstream length 93 Custom tag45 Pipe schedule no 94 Reference specification46 Downstream length 95 Special preparation47 Coupling quantity 96 Compliance standard48 Coupling nominal size Rating 97 Construction code49 Coupling locations 98 Calibration report50 Internal bore diameter 99 Weld radiographs51 Flow straightener type 10052 Pipe/Tube material 101 PHYSICAL DATA53 Bolting material 102 Estimated weight54 Exterior coating material 103 Face-to-face dimension55 End termination material 104 Removal clearance56 Gasket material 105 Mfr reference dwg57 10658 10759 108

110 CALIBRATIONS AND TEST INPUT OR TEST OUTPUT111 TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST LRV URV LRV URV112 Flow rate Diff pressure113 Test pressure114115116117118 COMPONENT IDENTIFICATIONS119 COMPONENT TYPE MANUFACTURER MODEL NUMBER120121122123124125

Rev Date Revision Description By Appv1 Appv2 Appv3 REMARKS

Form: 20F2321Rev 0 2001 ISA

1 RESPONSIBLE ORGANIZATION MAGNETIC FLOWMETER 6 SPECIFICATION IDENTIFICATIONS2 w/wo INTEGRAL TOTALIZER INDICATOR 7 Document no3 Device Specification 8 Latest revision Date4 9 Issue status5 10

11 FLOWMETER BODY 60 TOTALIZER INDICATOR12 Body type 61 Totalizer type13 Flow tube style 62 Enclosure type no/class14 End conn nominal size Rating 63 Signal power source15 End conn termn type Style 64 Contacts arrangement Quantity16 Flow tube diameter Thickness 65 Totalizer reset style17 Hardware mounting kit 66 Integral indicator style18 Flow tube material 67 Cert/Approval type19 Lining material 68 Mounting location/type20 End termination material 69 Enclosure material21 Gnd/protective ring matl 7022 71 PERFORMANCE CHARACTERISTICS23 72 Min press at design temp At24 END EXTENSIONS 73 Max press at design temp25 End termination type Style 74 Min working temperature Max26 Bolting material 75 Accuracy rating27 End termination material 76 Min velocity URL Max28 Gasket/O ring material 77 Min liquid conductivity29 78 Output signal damping LRL URL30 SENSING ELEMENT 79 Min ambient working temp Max31 Electrode type 80 Contacts ac rating At max32 Insertion length 81 Contacts dc rating At max33 Electrode material 82 Max sensor to receiver lg34 8335 COILS AND HOUSING 8436 Housing construction type 8537 Coil conn arrangement 86 ACCESSORIES38 Enclosure type no/class 87 Connecting cables length39 Signal power source 88 Cable Glands40 Signal termination type 89 Ultrasonic cleaner style41 Cert/Approval type 90 Empty tube detector42 Housing material 91 Calibrator adaptor43 92 Calibrator/configurator44 9345 TRANSMITTER OR CONVERTER 94 SPECIAL REQUIREMENTS46 Housing type 95 Custom tag47 Output signal type 96 Reference specification48 Enclosure type no/class 97 Compliance standard49 Characteristic curve 98 Calibration report50 Digital communication std 99 Software configuration51 Signal power source 10052 Failsafe style 101 PHYSICAL DATA53 Integral indicator style 102 Estimated weight54 Signal termination type 103 Face-to-face dimension55 Cert/Approval type 104 Overall height56 Mounting location/type 105 Removal clearance57 Failure/Diagnostic action 106 Signal conn nominal size Style58 Enclosure material 107 Mfr reference dwg59 108

110 CALIBRATIONS AND TEST INPUT OR TEST OUTPUT OR SCALE111 TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST LRV URV ACTION LRV URV112 Flow rate-Analog output113 Flow rate-Digital output114 Flow rate-Freq output115 Flow rate-Scale116 Test pressure117118 COMPONENT IDENTIFICATIONS119 COMPONENT TYPE MANUFACTURER MODEL NUMBER120121122123124125Rev Date Revision Description By Appv1 Appv2 Appv3 REMARKS

Form: 20F2381 Rev 0 2001 ISA

1 RESPONSIBLE ORGANIZATION VORTEX OR SWIRL FLOWMETER 6 SPECIFICATION IDENTIFICATIONS2 w/wo TOTALIZER INDICATOR 7 Document no3 Device Specification 8 Latest revision Date4 9 Issue status5 10

11 FLOWMETER BODY 58 TOTALIZER INDICATOR12 Body type 59 Totalizer type13 End conn nominal size Rating 60 Enclosure type no/class14 End conn termn type Style 61 Signal power source15 Seal type 62 Contacts arrangement Quantity16 Mounting hardware 63 Totalizer reset style17 Body wetted material 64 Integral indicator style18 End termination material 65 Cert/Approval type19 Gasket/Seal material 66 Mounting location/type20 67 Enclosure material21 6822 69 PERFORMANCE CHARACTERISTICS23 SENSING ELEMENT 70 Max press at design temp At24 Sensor type 71 Min working temperature Max25 Sensor wetted material 72 Flow rate accuracy rating26 Fill fluid material 73 Density accuracy rating27 74 Min velocity URL Max28 75 Density LRL URL29 76 Min reqd back press30 CONNECTION HEAD 77 Pressure drop at flow URL31 Housing type 78 Min ambient working temp Max32 Enclosure type no/class 79 Contacts ac rating At max33 Signal termination type 80 Contacts dc rating At max34 Cert/Approval type 81 Max sensor to receiver lg35 Enclosure material 8236 83 ACCESSORIES37 84 Connecting cables length38 TRANSMITTER OR COMPUTER 85 Isolation manifold39 Housing type 86 Remote indicator style40 Measurement compensation 87 Calibrator adapter41 Output signal type 8842 Enclosure type no/class 89 SPECIAL REQUIREMENTS43 Span-zero adjustment 90 Custom tag44 Characteristic curve 91 Reference specification45 Digital communication std 92 Special preparation46 Signal power source 93 Compliance standard47 Failsafe style 94 Calibration report48 Integral indicator style 95 Software configuration49 Signal termination type 9650 Cert/Approval type 97 PHYSICAL DATA51 Mounting location/type 98 Estimated weight52 Calibration type 99 Face-to-face dimension53 Failure/Diagnostic action 100 Overall height54 Enclosure material 101 Removal clearance55 102 Signal conn nominal size Style56 103 Mfr reference dwg57 104

110 CALIBRATIONS AND TEST INPUT OR TEST OUTPUT OR SCALE111 TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST LRV URV ACTION LRV URV112 Flow rate-Analog output113 Mass flow-Analog output114 Meas-Analog output115 Meas-Freq output 1116 Meas-Freq output 2117 Measurement-Scale118 Temp-Digital output119 Meas-Digital output120 Density-Digital output121 Test pressure122 COMPONENT IDENTIFICATIONS123 COMPONENT TYPE MANUFACTURER MODEL NUMBER124125126127Rev Date Revision Description By Appv1 Appv2 Appv3 REMARKS

Form 20F2521 Rev 0 2001 ISA

1 RESPONSIBLE ORGANIZATION CORIOLIS MASS FLOWMETER 6 SPECIFICATION IDENTIFICATIONS2 w/wo TOTALIZER INDICATOR 7 Document no3 Device Specification 8 Latest revision Date4 9 Issue status5 10

11 FLOWMETER BODY AND HOUSING 58 TOTALIZER INDICATOR12 Body/Housing type 59 Totalizer type13 End conn nominal size Rating 60 Enclosure type no/class14 End conn termn type Style 61 Signal power source15 Body wetted material 62 Contacts arrangement Quantity16 Housing material 63 Totalizer reset style17 End termination material 64 Integral indicator style18 65 Cert/Approval type19 66 Mounting location/type20 67 Enclosure material21 FLOWTUBE ASSEMBLY 6822 Flowtube type 69 PERFORMANCE CHARACTERISTICS23 Flowtube diameter 70 Max press at design temp At24 Flowtube material 71 Min working temperature Max25 72 Flow rate accuracy rating26 73 Density accuracy rating27 74 Min flow URL Max28 CONNECTION HEAD 75 Density LRL URL29 Housing type 76 Sec enclosure press rating30 Enclosure type no/class 77 Pressure drop at flow URL31 Signal termination type 78 Min ambient working temp Max32 Cert/Approval type 79 Contacts ac rating At max33 Housing material 80 Contacts dc rating At max34 81 Max sensor to receiver lg35 8236 83 ACCESSORIES37 TRANSMITTER OR COMPUTER 84 Connecting cables length38 Housing type 85 Heating kit style39 Measurement compensation 86 Calibrator/configurator40 Output signal type 8741 Enclosure type no/class 8842 Span-zero adjustment 89 SPECIAL REQUIREMENTS43 Characteristic curve 90 Custom tag44 Digital communication std 91 Reference specification45 Signal power source 92 Special preparation46 Failsafe style 93 Compliance standard47 Integral indicator style 94 Calibration report48 Signal termination type 95 Software configuration49 Cert/Approval type 9650 Mounting location/type 97 PHYSICAL DATA51 Failure/Diagnostic action 98 Estimated weight52 Enclosure material 99 Face-to-face dimension53 100 Overall height54 101 Removal clearance55 102 Signal conn nominal size Style56 103 Mfr reference dwg57 104

110 CALIBRATIONS AND TEST INPUT OR TEST OUTPUT OR SCALE111 TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST LRV URV ACTION LRV URV112 Mass flow-Analog output113 Meas-Analog output 2114 Meas-Analog output 3115 Meas-Freq output 1116 Meas-Freq output 2117 MeasurementScale118 Temp-Digital output119 Meas-Digital output120 Density-Digital output121 Test pressure122 COMPONENT IDENTIFICATIONS123 COMPONENT TYPE MANUFACTURER MODEL NUMBER124125126127Rev Date Revision Description By Appv1 Appv2 Appv3 REMARKS

Form: 20L2101 Rev 0 2001 ISA

1 RESPONSIBLE ORGANIZATION CAPACITANCE OR RF ADMITTANCE 6 SPECIFICATION IDENTIFICATIONS2 LEVEL TRANSMITTER w/wo SWITCHES 7 Document no3 Device Specification 8 Latest revision Date4 9 Issue status5 10

11 PROCESS CONNECTION 60 TRANSMITTER w/wo SWITCHES continued12 Body/Fitting type 61 Switch time delay13 Process conn nominal size Rating 62 Enclosure material14 Process conn termn type Style 6315 Wetted material 6416 Flange material 6517 Seal/O ring material 66 PERFORMANCE CHARACTERISTICS18 67 Max press at design temp At19 68 Min working temperature Max20 SENSING ELEMENT 69 Max discharge to sensor21 Configuration type 70 Accuracy rating22 Probe diameter 71 Min measurement span Max23 Insertion length 72 Min ambient working temp Max24 Inactive length 73 Contacts ac rating At max25 Integral cable length 74 Contacts dc rating At max26 Probe material 75 Max sensor to receiver lg27 Insulation/Sheath matl 7628 Weight material 7729 7830 7931 CONNECTION HEAD OR PREAMPLIFIER 8032 Type 8133 Measurement compensation 8234 Input signal URL 8335 Output signal type 84 ACCESSORIES36 Enclosure type no/class 85 Connecting cables length37 Power source 86 Power supply38 Cert/Approval type 87 Local indicator style39 Mounting location/type 88 Intrinsic safety barrier40 Enclosure material 8941 9042 9143 TRANSMITTER w/wo SWITCHES 92 SPECIAL REQUIREMENTS44 Housing type 93 Custom tag45 Measurement compensation 94 Reference specification46 Output signal type 95 Compliance standard47 Input signal URL 96 Calibration report48 Enclosure type no/class 9749 Characteristic curve 9850 Signal power source 9951 Contact arrangement Quantity 100 PHYSICAL DATA52 Failsafe style 101 Estimated weight53 RFI protection 102 Overall height54 Integral indicator style 103 Removal clearance55 Cert/Approval type 104 Signal conn nominal size Style56 Mounting location/type 105 Mfr reference dwg57 Static discharge prot 10658 Failure/Diagnostic action 10759 Adjustable signal damping 108

110 CALIBRATIONS AND TEST INPUT OR SETPOINT OUTPUT OR SCALE111 TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST LRV URV ACTION LRV URV112 Level-Analog output113 Level-Scale114 Level setpoint 1-Output115 Level setpoint 2-Output116 Level setpoint 3-Output117118 COMPONENT IDENTIFICATIONS119 COMPONENT TYPE MANUFACTURER MODEL NUMBER120121122123124125Rev Date Revision Description By Appv1 Appv2 Appv3 REMARKS

Form: 20L2111 Rev 0 2001 ISA

1 RESPONSIBLE ORGANIZATION DIFFERENTIAL PRESSURE LEVEL 6 SPECIFICATION IDENTIFICATIONS2 TRANSMITTER - FLANGE MOUNTED 7 Document no3 Device Specification 8 Latest revision Date4 9 Issue status5 10

11 TRANSMITTER BODY 60 REMOTE SEAL12 Body/Flange type 61 Seal type13 Process conn nominal size Rating 62 Process conn nominal size Rating14 Process conn termn type Style 63 Process conn termn type Style15 Vent/Drain location 64 Diaphragm extension lg16 Mounting type 65 Instrument conn nom size17 Body/Flange material 66 Flushing conn quantity18 Vent/Drain material 67 Capillary/Fitting dia Length19 Bolting material 68 Diaphragm material20 Flange adapter material 69 Capillary-armor material21 Gasket/O ring material 70 Bolting material22 Mounting kit material 71 Upper housing material23 72 Lower housing/Flange matl24 73 Gasket/Oring material25 74 Fill fluid material26 SENSING ELEMENT 7527 Detector type 76 PERFORMANCE CHARACTERISTICS28 Min diff pressure span Max 77 Max press at design temp At29 Diaphragm/Wetted material 78 Min working temp Max30 Fill fluid material 79 Accuracy rating31 80 Diff pressure LRL URL32 81 Fill fluid sp gr At temp33 82 Ambient temperature error34 TRANSMITTER 83 Min ambient working temp Max35 Output signal type 8436 Enclosure type no/class 8537 Characteristic curve 8638 Digital communication std 87 ACCESSORIES39 Signal power source 88 Air set filter style40 Transient protection 89 Air set gauges41 Integral indicator style 90 Heating kit style42 Signal termination type 91 Remote indicator style43 Cert/Approval type 9244 Span-Zero adjust loc 9345 Failure/Diagnostic action 94 SPECIAL REQUIREMENTS46 Enclosure material 95 Custom tag47 96 Reference specification48 97 Special preparation49 98 Compliance standard50 INTEGRAL SEAL 99 Software configuration51 Seal type 10052 Process conn nominal size Rating 101 PHYSICAL DATA53 Process conn termn type Style 102 Estimated weight54 Diaphragm extension lg 103 Overall height55 Diaphragm material 104 Removal clearance56 Upper housing/Flange matl 105 Signal conn nominal size Style57 106 Mfr reference dwg58 10759 108

110 CALIBRATIONS AND TEST INPUT OR TEST OUTPUT OR SCALE111 TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST LRV URV ACTION LRV URV112 Diff press-Analog output113 Diff press-Scale114 Diff press-Digital output115 Press-Digital output116 Temp-Digital output117118 COMPONENT IDENTIFICATIONS119 COMPONENT TYPE MANUFACTURER MODEL NUMBER120121122123124125

Rev Date Revision Description By Appv1 Appv2 Appv3 REMARKS

Form: 20L2121 Rev 0 2001 ISA

1 RESPONSIBLE ORGANIZATION 6 SPECIFICATION IDENTIFICATIONS2 DISPLACER-TYPE LEVEL TRANSMITTER 7 Document no3 OR LOCAL CONTROLLER 8 Latest revision Date4 Device Specification 9 Issue status5 10

11 BODY OR CAGE 60 TRANSMITTER OR CONTROLLER continued12 Body/Cage type 61 Cert/Approval type13 Process conn nominal size Rating 62 Mounting location/type14 Process conn termn type Style 63 Span-Zero adjust lct15 Flange facing finish 64 Enclosure material16 Lower conn location Upper 6517 Gage glass conn nom size Rating 6618 Gage glass conn type Style 6719 Vent/Drain conn nom size Rating 68 PERFORMANCE CHARACTERISTICS20 Vent/Drain termn type Style 69 Max press at design temp At21 Head orientation/type 70 Min working temperature Max22 Extension/Heat insulator 71 Accuracy rating23 Body/Cage material 72 Level Lower Range-Limit URL24 Bolting material 73 Min level span Max25 Gasket/O ring material 74 Min differential sp gr26 75 Min ambient working temp Max27 76 Contacts ac rating At max28 77 Contacts dc rating At max29 SENSING ELEMENT 7830 Sensor type 7931 Sp gr Lower Range-Limit URL 8032 Displacer diameter Length 81 ACCESSORIES33 Extension length 82 Connecting cables length34 Displacer material 83 Air set filter style35 Torque tube/Spring matl 84 Air set gauges36 Extension/Cable material 85 Gage glass style37 Trim material 86 Gage valve style38 8739 8840 CONNECTION HEAD 89 SPECIAL REQUIREMENTS41 Type 90 Custom tag42 Enclosure type no/class 91 Reference specification43 Signal termination type 92 Special preparation44 Cert/Approval type 93 Compliance standard45 Enclosure material 94 Construction code46 95 Software configuration47 9648 9749 TRANSMITTER OR CONTROLLER w/wo SWITCHES 98 PHYSICAL DATA50 Housing type 99 Estimated weight51 Output signal type 100 Overall height52 Enclosure type no/class 101 Removal clearance53 Control mode 102 Upper to lower conn lg54 Digital communication std 103 Lower to drain conn lg55 Signal power source 104 Signal conn nominal size Style56 Contacts arrangement Quantity 105 Mfr reference dwg57 Transient protection 10658 Integral indicator style 10759 Signal termination type 108

110 CALIBRATIONS AND TEST INPUT OR SETPOINT OUTPUT OR SCALE111 TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST LRV URV ACTION LRV URV112 Level-Analog output113 Level-Digital output114 Level-Scale115 Level setpoint 1-Output116 Level setpoint 2-Output117 Test pressure118 COMPONENT IDENTIFICATIONS119 COMPONENT TYPE MANUFACTURER MODEL NUMBER120121122123124125Rev Date Revision Description By Appv1 Appv2 Appv3 REMARKS

Form: 20L2141 Rev 0 2001 ISA

1 RESPONSIBLE ORGANIZATION NUCLEAR RADIATION LEVEL 6 SPECIFICATION IDENTIFICATIONS2 TRANSMITTER w/wo SWITCHES 7 Document no3 Device Specification 8 Latest revision Date4 9 Issue status5 10

11 RADIATION SOURCE 60 PERFORMANCE CHARACTERISTICS12 Source type 61 Level accuracy rating13 Number of sources 62 Density accuracy rating14 Source size 63 Min measurement span Max15 Fireproof design type 64 Response time16 Shutter style 65 Min ambient working temp Max17 Position switch type 66 Contacts ac rating At Max18 Mounting location/type 67 Contacts dc rating At Max19 Collimation angle 68 Max sensor to receiver lg20 Source material 6921 Housing material 7022 7123 7224 SENSING ELEMENT 7325 Detector type 7426 Detector style 7527 Number of detectors 7628 Active length 7729 7830 7931 CONNECTION HEAD OR PREAMPLIFIER 8032 Type 8133 Housing type 8234 Measurement compensation 8335 Output signal type 8436 Enclosure type no/class 85 ACCESSORIES37 Signal power source 86 Connecting cables length38 Cert/Approval type 87 Mounting hardware39 Mounting location/type 88 Calibrator40 Enclosure material 8941 9042 9143 TRANSMITTER w/wo SWITCHES 9244 Housing type 93 SPECIAL REQUIREMENTS45 Measurement compensation 94 Custom tag46 Output signal type 95 Reference specification47 Enclosure type no/class 96 Compliance standard48 Characteristic curve 9749 Digital communication std 9850 Signal power source 9951 Contact arrangement Quantity 100 PHYSICAL DATA52 Failsafe style 101 Estimated weight53 Integral indicator style 102 Overall length54 Cert/Approval type 103 Removal clearance55 Mounting location/type 104 Signal conn nominal size Style56 Failure/Diagnostic action 105 Mfr reference dwg57 Enclosure material 10658 10759 108

110 CALIBRATIONS AND TEST INPUT OR SETPOINT OUTPUT OR SCALE111 TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST LRV URV ACTION LRV URV112 Level-Analog output113 Level-Digital output114 Level-Scale115 Density-Digital output116 Level setpoint 1-Output117 Level setpoint 2-Output118 COMPONENT IDENTIFICATIONS119 COMPONENT TYPE MANUFACTURER MODEL NUMBER120121122123124125Rev Date Revision Description By Appv1 Appv2 Appv3 REMARKS

Form: 20L2151 Rev 0 2001 ISA

1 RESPONSIBLE ORGANIZATION RESISTANCE-TAPE LEVEL 6 SPECIFICATION IDENTIFICATIONS2 TRANSMITTER w/wo SWITCHES 7 Document no3 Device Specification 8 Latest revision Date4 9 Issue status5 10

11 PROCESS CONNECTION 60 PERFORMANCE CHARACTERISTICS12 Body/Fitting type 61 Max press at design temp At13 Process conn nominal size Rating 62 Min working temperature Max14 Process conn termn type Style 63 Repeatability15 Shell/cap material 64 Min measurement span Max16 Seal/O ring material 65 Sensor resistance coef17 66 Actuation depth18 67 Min ambient working temp Max19 68 Contacts ac rating At max20 SENSING ELEMENT 69 Contacts dc rating At max21 Detector type 70 Max sensor to receiver lg22 Temperature sensor qty 7123 Temperature coefficient 7224 Temp nominal resistance At 7325 Sheath style 7426 Overall length 7527 Inactive length 7628 Sheath material 7729 Protector material 7830 7931 8032 8133 CONNECTION HEAD OR HOUSING 8234 Type 8335 Housing style 8436 Enclosure type no/class 85 ACCESSORIES37 Signal termination type 86 Connecting cables length38 Cert/Approval type 87 Local indicator style39 Mounting location/type 88 Intrinsic safety barrier40 Enclosure material 8941 Breather material 9042 Fitting material 9143 9244 93 SPECIAL REQUIREMENTS45 TRANSMITTER w/wo SWITCHES 94 Custom tag46 Housing type 95 Reference specification47 Output signal type 96 Compliance standard48 Enclosure type no/class 9749 Characteristic curve 9850 Signal power source 9951 Contacts arrangement Quantity 100 PHYSICAL DATA52 Failsafe style 101 Estimated weight53 Integral indicator style 102 Overall height54 Cert/Approval type 103 Removal clearance55 Mounting location/type 104 Signal conn nominal size Style56 Enclosure material 105 Mfr reference dwg57 10658 10759 108

110 CALIBRATIONS AND TEST INPUT OR SETPOINT OUTPUT OR SCALE111 TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST LRV URV ACTION LRV URV112 Level-Analog output113 Temp-Analog output114 Level-Scale115 Level setpoint 1-Output116 Level setpoint 2-Output117118 COMPONENT IDENTIFICATIONS119 COMPONENT TYPE MANUFACTURER MODEL NUMBER120121122123124125Rev Date Revision Description By Appv1 Appv2 Appv3 REMARKS

Form: 20L2171 Rev 0 2001 ISA

1 RESPONSIBLE ORGANIZATION NON-CONTACT ULTRASONIC LEVEL 6 SPECIFICATION IDENTIFICATIONS2 TRANSMITTER w/wo SWITCHES 7 Document no3 Device Specification 8 Latest revision Date4 9 Issue status5 10

11 PROCESS CONNECTION 60 PERFORMANCE CHARACTERISTICS12 Body/Fitting type 61 Max press at design temp At13 Process conn nominal size Rating 62 Min working temperature Max14 Process conn termn type Style 63 Accuracy rating15 Wetted material 64 Level lower range limit URL16 Flange material 65 Min measurement span Max17 Seal/O ring material 66 Beam angle18 67 Min ambient working temp Max19 68 Contacts ac rating At max20 69 Contacts dc rating At max21 SENSING ELEMENT 70 Max sensor to receiver lg22 Detector type 7123 Detector style 7224 Insertion length 7325 Integral cable length 7426 7527 7628 7729 CONNECTION HEAD 7830 Type 7931 Enclosure type no/class 8032 Cert/Approval type 8133 Mounting location/type 8234 Enclosure material 8335 84 ACCESSORIES36 85 Connecting cables length37 86 Enclosure heater38 TRANSMITTER w/wo SWITCHES 87 Mounting hardware39 Housing type 8840 Measurement compensation 8941 Output signal type 9042 Enclosure type no/class 9143 Control sequence 92 SPECIAL REQUIREMENTS44 Characteristic curve 93 Custom tag45 Digital communication std 94 Reference specification46 Signal power source 95 Compliance standard47 Contact arrangement Quantity 96 Calibration report48 Failsafe style 9749 Integral indicator style 9850 Cert/Approval type 9951 Mounting location/type 100 PHYSICAL DATA52 Failure/Diagnostic action 101 Estimated weight53 Signal processing 102 Overall height54 Enclosure material 103 Removal clearance55 104 Signal conn nominal size Style56 105 Mfr reference dwg57 10658 10759 108

110 CALIBRATIONS AND TEST INPUT OR SETPOINT OUTPUT OR SCALE111 TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST LRV URV ACTION LRV URV112 LevelAnalog output113 Level-Scale114 Level setpoint 1-Output115 Level setpoint 2-Output116 Level setpoint 3-Output117118 COMPONENT IDENTIFICATIONS119 COMPONENT TYPE MANUFACTURER MODEL NUMBER120121122123124125Rev Date Revision Description By Appv1 Appv2 Appv3 REMARKS

Form: 20L2301 Rev 0 2001 ISA

1 RESPONSIBLE ORGANIZATION CAPACITANCE OR RF ADMITTANCE 6 SPECIFICATION IDENTIFICATIONS2 LEVEL SWITCH 7 Document no3 Device Specification 8 Latest revision Date4 9 Issue status5 10

11 PROCESS CONNECTION 60 SWITCH MECHANISM continued12 Body/Fitting type 61 RFI protection13 Process conn nominal size Rating 62 Switch time delay14 Process conn termn type Style 63 Enclosure material15 Wetted material 6416 Flange material 6517 Seal/O ring material 66 PERFORMANCE CHARACTERISTICS18 67 Max press at design temp At19 68 Min working temperature Max20 SENSING ELEMENT 69 Max discharge to sensor21 Configuration type 70 Repeatability/Sensitivity22 Number of elements 71 Min measurement span Max23 Probe diameter 72 Min ambient working temp Max24 Insertion length 73 Contacts ac rating At max25 Inactive/Dead length 74 Contacts dc rating At max26 Integral cable length 75 Max sensor to receiver lg27 Probe material 7628 Insulation/Sheath matl 7729 Weight material 7830 7931 8032 CONNECTION HEAD OR PREAMPLIFIER 8133 Type 8234 Measurement compensation 8335 Input signal URL 8436 Output signal type 85 ACCESSORIES37 Enclosure type no/class 86 Connecting cables length38 Signal power source 87 Mounting hardware39 Cert/Approval type 88 External relay40 Mounting location/type 89 Intrinsic safety barrier41 Enclosure material 9042 9143 9244 SWITCH MECHANISM 93 SPECIAL REQUIREMENTS45 Housing type 94 Custom tag46 Element style 95 Reference specification47 Measurement compensation 96 Compliance standard48 Output signal type 9749 Input signal LRL URL 9850 Enclosure type no/class 9951 Signal power source 100 PHYSICAL DATA52 Dead band type 101 Estimated weight53 Contacts arrangement Quantity 102 Overall height54 Failsafe style 103 Removal clearance55 Integral indicator style 104 Signal conn nominal size Style56 Cert/Approval type 105 Mfr reference dwg57 Mounting location/type 10658 Static discharge prot 10759 Failure/Diagnostic action 108

110 CALIBRATIONS AND TEST SETPOINT OUTPUT111 TAG NO/FUNCTIONAL IDENT MEAS/SIGNAL/TEST LRV URV ACTION LRV URV112 Level setpoint 1-Output113 Level setpoint 2-Output114 Level setpoint 3-Output115 Level setpoint 4-Output116117118 COMPONENT IDENTIFICATIONS119 COMPONENT TYPE MANUFACTURER MODEL NUMBER120121122123124125Rev Date Revision Description By Appv1 Appv2 Appv3 REMARKS

Form: 20L2311 Rev 0 2001 ISA

1 RESPONSIBLE ORGANIZATION FLOAT OR DISPLACER LEVEL SWITCH 6 SPECIFICATION IDENTIFICATIONS2 7 Document no3 Device Specification 8 Latest revision Date4 9 Issue status5 10

11 BODY OR CAGE 60 PERFORMANCE CHARACTERISTICS12 Body/Cage type 61 Max press at design temp At13 Process conn nominal size Rating 62 Min working temperature Max14 Process conn termn type Style 63 Repeatability15 Flange facing finish 64 Level Lower Range-Limit URL16 Lower conn location Upper 65 Dead band rating17 Gage glass conn nom size Style 66 Min ambient working temp Max18 Try-cock conn nom size Style 67 Contacts ac rating At max19 Head orientation/type 68 Contacts dc rating At max20 Extension/Heat insulator 6921 Body/Cage material 7022 Bolting material 7123 Gasket material 7224 7325 7426 7527 SENSING ELEMENT 7628 Sensor type 7729 Sp gr Lower Range-Limit URL 7830 Adjustable LRL URL 7931 Sensor quantity 8032 Float/Displacer dia Length 8133 Extension/stem length 82 ACCESSORIES34 Float/Displacer material 83 Try-cocks style35 Torque tube/Spring matl 84 Gage glass style36 Magnetic sleeve material 85