Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
25°
30°
On previous models drive belts required adjustment and replacing that placed a burden on users and retailers. Additionally, when washing the blade cover after cutting the grass the belt would get in the way. By using the long life Shaft Drive, you will experience the increased maintainability and benefit of the blade drive.
You can switch from AWD to 2WD (vice versa) depending on the ground conditions.Use the AWD when operating on steep slopes, bumpy terrain, tough area so on.
Shaft Drive
Gets all the power to the blades
Super tough shaft driven geabox
Climbing prowess
Gradeability & Stability Angle
HST imageNo belt hassles, gets all the power to the bladesFor more information
Exclusive
Shaft DrivePowerful & Efficient
AWD
Auxiliary transmission
CANYCOM: possible to change the speed (low or high), it reduces running cost of the HST.It possible to change 2WD to 4WD, good mileage.Easy maintenance, durability, and efficient.
With all time 4WD, reduces mileage.With all time high speed, the HST life time is not efficient.In case of maintenance, it costs and difficult to identify the causes because it needed to be dismantled hydraulic parts.
5 6
When parts other than CANYCOM brand name parts are used they may not be covered by warranty.
Common feedback we had from customers after purchasing a ride-on brush cutter was regarding the task of changing blades. ★The potential for injury was high due to the difficulty removing old blades. ★Rusting and warping made removal of bolts difficult or impossible. ★Special tools were required to replace blades in the field. In order to resolve these issues we successfully developed this blade system.No tools are necessary and blades can be changed with ease and speed even in the field.
The grass cutting length lever has been made as short as possible to ensure that it will not catch on branches no matter how low. An ergonomic low resistance control lever makes adjustments of 0-150mm, or 21 levels of adjustment, possible.
Adjust cutting height
high grass ~ low grass ok
Open cutting blade shield
Cutting Rotary Drive Belt・ Brake
Tooless easy change - cutting blade
Easy and Convenient Height of
Cut ControlTough Swinging
Blade System
BeforeAfter
*Except 14ps
7 8
Other features
SUBARUEH72DSEH65DSEH63DSEX40DS
■Cutter Performance ExamplesValues may vary depending on environmental conditions.
1000m2 = 0.24 acres
Brush Type
Grass Height
Time needed to cutbrush per 1000m2
60% Millet・1%Pampas1% Nebia・2% Other
200-250cm
About 3 hours
Pampas
100-150cm
About 2 hours
Nebia (pasture)
80-120cm
About 1 hour
Japanese dock
About 40 mins
50-100cm
One kind of brush One kind of brush One kind of brush
Lantana
About 1 hour
100cm-
■Adjustment
Seat
Steering wheel
Steering wheel
■Blade Cleaning
Miscellaneousmixed brush
100 of the World's Worst
Invasive Alien Species
EH72DS
■Good running performance on the rough area
■Charge pump
■Wide opening Engine Cover
■Engine
■Minimum turning radius1.8m
FrontRear
975㎜
■Wide cutting width
1.8m
■Optional seat for only CMX227HRCIS Charge pump
specification
No charge pump
Charge pump
Charge pump
Life time 1000h
Life time 300h
9 10
CMX2502 CMX227 CM226 CMX186 CM185 CMX1402 CM1401Specifications Dimensions
AWD(4WD)Front BrakeCharge PumpShaft DriveEasy Blade System
Cutting WidthNumber of BladesBlade Type
Cut Control(Cutting Height)
ModelTypeDisplacementMaximum OutputMaximum TorqueStarter SystemFuelFuel ConsumptionFuel Tank CapacitySpeed Minimum Turning RadiusGradeabilityStability Angle Main TransmissionAuxiliary Transmission Front RearSteeringBrakes
Cutting System
●●●●●●
0~150(21steps)975㎜2
Free Knife & Stepped Stay355kg
7300㎡/h *1
Robin EH72DSAir-cooled 4-cycle V-twin Gasoline
720㎤18.4kW(25PS)
53.6N・m(5.47kgf・m)Electric
Automotive Unleaded Gasoline378g/kW・h(280g/PS・h)
20ℓHigh 0 to13.8 Low 0 to 7.7
1.8m25°
Left 30° Right 30°HST(Continuously Variable)
Constant MeshAGR 4.00-7(2PR) 17×8.00-8(4PR)
Rack and Pinion Round Steering WheelInternally Expanding
●●●●●●
0~150(21steps)975㎜2
Free Knife & Stepped Stay350kg
7300㎡/h *1
Robin EH65DSAir-cooled 4-cycle V-twin Gasoline
653㎤16.4kW(22PS)
45.6N・m(4.65kgf・m)Electric
Automotive Unleaded Gasoline310g/kW・h(230g/PS・h)
20ℓHigh 0 to13.8 Low 0 to 7.7
1.8m25°
Left 30° Right 30°HST(Continuously Variable)
Constant MeshAGR 4.00-7(2PR) 17×8.00-8(4PR)
Rack and Pinion Round Steering WheelInternally Expanding
-●●●●●
0~150(21steps)975㎜2
Free Knife & Stepped Stay330kg
7300㎡/h *1
Robin EH65DSAir-cooled 4-cycle V-twin Gasoline
653㎤16.4kW(22PS)
45.6N・m(4.65kgf・m)Electric
Automotive Unleaded Gasoline310g/kW・h(230g/PS・h)
20ℓHigh 0 to13.8 Low 0 to 7.7
1.8m15°
Left 30° Right 30°HST(Continuously Variable)
Constant MeshAGR 4.00-7(2PR) 17×8.00-8(4PR)
Rack and Pinion Round Steering WheelInternally Expanding
●●●●●●
0~150(21steps)975㎜2
Free Knife & Stepped Stay345kg
7000㎡/h *1
Robin EH63DSAir-cooled 4-cycle V-twin Gasoline
653㎤13.4kW(18.3PS)
43.3N・m(4.42kgf・m)Electric
Automotive Unleaded Gasoline310g/kW・h(230g/PS・h)
20ℓHigh 0 to 12.8 Low 0 to 7.2
1.8m25°
Left 30° Right 30°HST(Continuously Variable)
Constant MeshAGR 4.00-7(2PR)17×8.00-8(4PR)
Rack and Pinion Round Steering WheelInternally Expanding
-●●●●●
0~150(21steps)975㎜2
Free Knife & Stepped Stay325kg
7000㎡/h *1
Robin EH63DSAir-cooled 4-cycle V-twin Gasoline
653㎤13.4kW(18.3PS)
43.3N・m(4.42kgf・m)Electric
Automotive Unleaded Gasoline310g/kW・h(230g/PS・h)
20ℓHigh 0 to 12.8 Low 0 to 7.2
1.8m15°
Left 30° Right 30°HST(Continuously Variable)
Constant MeshAGR 4.00-7(2PR)17×8.00-8(4PR)
Rack and Pinion Round Steering WheelInternally Expanding
●●-●-●
0~150(21steps)975㎜2
Free Knife & Stepped Stay325kg
7200㎡/h *1
Robin EX40DSAir-cooled 4-cycle single cylinder OHC, Gasoline
404㎤10.3kW(14PS)27N・m(2.7kgf・m)Electric(Recoil)
Automotive Unleaded Gasoline400g/kW・h(297g/PS・h)
7.0ℓHigh 0 to 13.2 km/h Low 0 to 7.4km/h
1.8m20°
Left 30° Right 30°HST(Continuously Variable)
Constant MeshAGR 4.00-7(2PR)17×8.00-8(4PR)
Rack and Pinion Round Steering WheelInternally Expanding
---●-●
0~150(21steps)975㎜2
Free Knife & Stepped Stay305kg
7200㎡/h *1
Robin EX40DSAir-cooled 4-cycle single cylinder OHC, Gasoline
404㎤10.3kW(14PS)27N・m(2.7kgf・m)Electric(Recoil)
Automotive Unleaded Gasoline400g/kW・h(297g/PS・h)
7.0ℓHigh 0 to 13.2 km/h Low 0 to 7.4km/h
1.8m15°
Left 30° Right 30°HST(Continuously Variable)
Constant MeshAGR 4.00-7(2PR)17×8.00-8(4PR)
Rack and Pinion Round Steering WheelInternally Expanding
Machine MassMowing Rate
Engine
Performance
Drive Train
These specifications are subject to change without notice.*1 Estimated at the maximum speed with the auxiliary transmission in Low position.
CMX1402CM1401
CMX2502CMX227CM226CMX186CM185
Type
Type
Overall Width1085㎜
Step is folded1020㎜ Overall Length 1998㎜
Wheelbase 1300㎜
Tread Front860㎜
Ground Clearance 130㎜
Tread Rear800㎜
Overall Height910《960》㎜
Model and Type
Tires
Overall Length 1980㎜
Wheelbase 1300㎜
Tread Front860㎜
Ground Clearance 130㎜
Tread Rear800㎜
Overall Height910㎜
25PS
22PS
22PS
18PS
18PS
14PS
14PS
《 》indicates the Extra Seat model
Overall Width1085㎜
Step is folded1020㎜
11 12
Z116 9002 010PART NO.
■CG431
Bush Cutter George
・Electric start model・Diesel Engine・HST(Continuously variable with Hi/Lo modes)
Max.Output: 44.8PS (Without engine net and fan)
Overall Length×Width×Height:3465×1700×1405㎜Cutting Width:1545㎜ ・ Cutting Height:0~320㎜
Tracked Step on Front Flail Brushcutter
[CG431]
The other... http://www.canycom.jp/eng/
■CM1401 ■CMX222■CMX1402 Z321 4212 010
PART NO.
■CM184 ■CM185■CM225 ■CM226 ■CMX186 ■CMX224■CMX227 ■CMX2502
■CM141 Z331 4206 010PART NO.
Z332 4202 010PART NO.
No tools are necessary
Blades
MASAO
Bush Cutter George
13 14