1

Ironer seriesChest ironer--OC

Items Unit OC833（S/H/G）2 OC833（S/H/G）3Chest no. Pcs 2 3Diameter mm 800 800

width mm 3300 3300speed m/min 5--35 5--50

heating area m2 9.88 15.77steam

consumption kg/h 250 350

Gas consumption l/min 433 567Heat oil l/min 550 850

Drive motor power kw 11 15

Fan motor power kw 2.2 4

Exhaused air m3/h 2160 3240Wind pipe size mm 200 220

Steam pipe size DN (mm) 50 65Height mm 1630 1630Depth mm 3530 4740Width mm 4450 4450Weight kg 7270 10100

The roller, chest, bridge, support cylinder, connecting rod andbalance shaft combine together to form an adaptive balancemechanism so that the pressure on drum and chest surfacemore even

Feeding rollers and drum drived by one motor, speed pulleydirectly sets and adjusts speed difference between drums toensure high ironing quality

Adopt Japanese springs, UK high temperature resistancepadding, good friction and air permeability, chest pressure alsoadjustable, which also ensure the ironing quality

High efficient and built-in dehumidification system, it canreasonably set and distribute temperature and humidity foreach drum and ensure water vapor taken out to achieve goodironing quality and save energy

Adopt unique multi heat chambers with both sides thermal cycledesign, steam, thermal oil, gas/LPG, electric heat for option,chest surface temperature can reach to 200℃ when use gas orthermal oil heat, smoothly ironing and fast speed that reduceenergy 25-35%，improve ironing speed by 30%

➢ Advanced computer intelligent control, convenient man-machine interaction, fault self-diagnosis function, easy to use and maintain, can synchronously working with folder

1-4 rollers free combination, can work with sheet feeder toimprove working efficiency

Remark：Gas oil ironer need to equip with gas boiler or LPG, working production improve 30% than steam or electricity heat ironer.

2

OC Chest ironer main features

SpiraxSarco steam valves

Neat pipes with good qualityConstant frenquency converter easy to adjust speed and improve working effeciency

Even pressure on chest surface chest roller connect with shaftOther structural front end pressure is too big easy cause dirty stain.

Ironer series

3

OC The precise chest and roll with reasonable design reliable parts

Special heating chest processing technology (welding, heat treatment, fine boring machining, grinding, high speed polishing), the size of thescientific design and strict process control to ensure that the chest cooperate more precise roller, surface more smooth, ironing effect good.

Using the Japanese roller special vent spring, the UK Andrew padding, the good friction and the air permeability is high so achieve more idealironing effect.

Adopt unique chest cavity circulating heating design, the flow of steam or heat conducting oil is faster, heat energy utilization, more effectivelyovercome the chest surface temperature caused by lower iron failure.

Japan spring & UK padding

surface special treatment

Ironer series

4

Roller type ironer--OR number 1-6, drum diameter 800mm, stainless steel material, working speed: 0-45m/minute

Variable frequency stepless speed control, differential speed linkage adjustment, low noise

during working

Cabinet cut by CNC laser cutting machine one piece metal finished without welding, high

precision rollers ensure smoothly working

Steam heating machine installed independent steam trap with safety valve, pressure gauge

that can bear 0.8Mpa pressure to ensure safety working

Gas heating machine adopt imported Riello burner, thermal oil in layer of drum with even

heating to make surface temperature of drum up to 180℃ and save energy by 30%, greatly

improve working efficiency

PLC controller, LCD screen to set up parameters and check working information

Can work with feeder or spreader to improve working ability

Easy to work with folder & stacker to keep the same speed

Heating way：steam, electricity, gas or LPG

Items Until OR830-2 OR830-3 OR830-4 OR833-2 OR833-3 OR833-4Max ironing width mm 3000 3300

Ironing speed m/min 0-16 0-30 0-40 0-16 0-30 0-40Hz Hz 50-60

Voltage V 380Motor power KW 1.5 2.2 3.7 1.5 2.2 3.7

Steam consumption Kg/h 200 300 400 220 330 440Gas consumption m3/h 8 12 16 9 13.5 18

Dimension L/mm 4320 4620W/mm 2820 3770 4720 2820 3770 4720H/mm 1380

Weight kg 3340 4670 5980 3440 4820 6190

Ironer series

5

Items Unit FIL833-112(1feeder+1roller+2chest） FIL833-113（1feeder+1roller+3chest）

Ironing width mm 3300

Feeding number group 1 1

number of rollers group 1 1-2

number of chest group 2 3

ironing speed m/min 0-40 0-50

steam pressure Mpa 0.4-0.8

Steam consumption（steam） Kg/h 350 450

heat output （gas heat） Kcar(m3) 250000(29) 350000(40)

motor power KW 20 25.5

outside dimension

长mm 4620

深mm 4850 6150

高mm 1760

Overall weight kg 8500 11500

Combine ironer--FIL33（Panel product） This type combine by roller+ chest + vacuum feeder whole line This machine could acheive high speed&high quality ironing under

the low pressure（20-50m/min)。 Equip with air exhaust cover lower cost and protect envieroment Acheive same speed with each rollers Double method to ensure the safety during work Working equip with folder&stacker acheive same speed

Recall customer information and data easy to manage

Heating type: steam or gas oil

Ironer series

✓ Front of machine equipped with manual feeder or auto spreader（1 set), improve feeding ability and quantity integrated suspended hood; Next equip roller

ironer according to pressure 1-2 rollers to pre-treat linen then equit with chest ironer according to speed request (1-4 chest) improve speed and ironing

quality.

✓ The three models integration together save space limited and control together acheive same speed easy to operate and beautiful surface design .

✓ Heating way: steam, electricity, gas choose and available by customers

6

manual feeder

roller ironer

Chest ironer

integrated wind suspended hood

FIL Feeder，roller，chest integrated one piece ironer（30-50m/min）

general controller

Folder

stacker

3. Ironer series

7

Roller ironer: Dry surface of linen mositure to pre drying before chest

Chest ironer: improve ironing quality and speed

Vacuum feeder：Reduce linen by linen each distance during feeding improve quantity to 30%

FIL Integrate ironer：Mix pressure（0.45Mpa）speed range（20-40m/min），Suitatable to customers who request speed+ironing quality

Integrate controller system in front of machine

1feeder+1roller+2chest

3. Ironer series

8

FIL Combine ironer：Gas heat max to 200 degree（chest surface180 degree），Working speed reach to 25-50m/min

Heat conduction oil is heated, the oil temperature can reach 220 degree, and the heat efficiency is up to 90%, save 30% energy than steam heat

Oil inlet

220 ° C

Oil outlet

200 ° C

Italy gas oil burner

3. Ironer series

gas roller ironer gas dryer

Tunnel system（steam） washer extractor（steam）

gas chest ironer

gas pipe

small gas generatorGas steam generator

Green gas heat technology（no boiler directly gas or LPG heat cost save 30%)

gas double door dryer

gas oil heatgas directly heat

3. Ironer series

9