Upload
solar-control
View
220
Download
0
Embed Size (px)
Citation preview
8/3/2019 IQMLC-BROCHURE MechoSystems MechoShade
1/4
Switching flexibility, multiplelevels of control
Any combination of switching including
Individual, Local, Sub-Group, Group and
Master control within each 4 motor
IQ/MLC using economical standard
motors.
Low voltage 12 voltDC controlCompatible with off-the shelf sun, sun/
wind, remote control, timers and A/V
system components.
Two modes of operation
Normal Mode Shades may stop any-
where at anytime and at 3 intermediate
stop positions.
Uniform Mode Shades may only stop
at pre-selected positions plus full up and
full down. This assures uniformity of shadepositioning.
Switching and reconfigura-tion without rewiring
Reconfigure switching requirements via
Assignment Dip Switches within the
IQ/MLC control unit;or add motors and
switches, by linking IQ/MLCs in series
within a low voltage control circuit.
LiteTouch H Series Sw
Sculptured architectural, 3 or 6 bu
unit, face plates in standard anod
aluminum, stainless steel and pri
finishes. Premium finish, special
for top of the line architectural de
include oil rubbed bronze and 24
gold plate.
he IQ/MLC
Window
Management System
ffers mid window
ignment and
esponsive multi-level
witch control...
ght at your finger tips.
MechoShade Systems, Inc.is pleased
to introduce the IQ/MLC controller.
The most advanced state-of-the-art
microprocessor-based window manage-
ment system utilizing ElectroShades
with
cost-effective standard (asynchronous)
motors in a point-to-point hardwired system.
The IQ/MLC has been developed toprovide unique features not available in any
other standard motor control system.
Mid window alignment withthree intermediate positions
Touch the appropriate combination of
buttons and the shades will align at either
full up, full down or any of the 3 default
or custom mid window positions according
to the motor/switch groupings assigned
in the IQ/MLC
control unit.
Q/MLC Window Managementor ElectroShadesQ/MLC Window Managementor ElectroShades
997, MechoShade Systems, Inc., Long Island City, NY.All rights reserved.
MASTER
LOCAL
Three default mid window alignment positions with up to five levels of switching control.
25%
50%
75%
Solar Control, LLC | 888-550-4836
SolarControlLLC.com
8/3/2019 IQMLC-BROCHURE MechoSystems MechoShade
2/4
Control Systems Division
AUTO ALIGN YOUR SHADES
WITH THE IQ/MLC
INTERMEDIATE POSITION
INTERMEDIATE POSITION
INTERMEDIATE POSITION
FULLDOW
FULL
Time to start a newwindow management policy.Time to start a newwindow management policy.
Control Systems Division
Solar Control, LLC | 888-550-4836
SolarControlLLC.com
8/3/2019 IQMLC-BROCHURE MechoSystems MechoShade
3/4
Switching flexibility, multiplelevels of control
Any combination of switching including
Individual, Local, Sub-Group, Group and
Master control within each 4 motor
IQ/MLC using economical standard
motors.
Low voltage 12 voltDC controlCompatible with off-the shelf sun, sun/
wind, remote control, timers and A/V
system components.
Two modes of operation
Normal Mode Shades may stop any-
where at anytime and at 3 intermediate
stop positions.
Uniform Mode Shades may only stop
at pre-selected positions plus full up and
full down. This assures uniformity of shadepositioning.
Switching and reconfigura-tion without rewiring
Reconfigure switching requirements via
Assignment Dip Switches within the
IQ/MLC control unit;or add motors and
switches, by linking IQ/MLCs in series
within a low voltage control circuit.
LiteTouch H Series Sw
Sculptured architectural, 3 or 6 bu
unit, face plates in standard anod
aluminum, stainless steel and pri
finishes. Premium finish, special
for top of the line architectural de
include oil rubbed bronze and 24
gold plate.
he IQ/MLC
Window
Management System
ffers mid window
ignment and
esponsive multi-level
witch control...
ght at your finger tips.
MechoShade Systems, Inc.is pleased
to introduce the IQ/MLC controller.
The most advanced state-of-the-art
microprocessor-based window manage-
ment system utilizing ElectroShades
with
cost-effective standard (asynchronous)
motors in a point-to-point hardwired system.
The IQ/MLC has been developed toprovide unique features not available in any
other standard motor control system.
Mid window alignment withthree intermediate positions
Touch the appropriate combination of
buttons and the shades will align at either
full up, full down or any of the 3 default
or custom mid window positions according
to the motor/switch groupings assigned
in the IQ/MLC
control unit.
Q/MLC Window Managementor ElectroShadesQ/MLC Window Managementor ElectroShades
997, MechoShade Systems, Inc., Long Island City, NY.All rights reserved.
MASTER
LOCAL
Three default mid window alignment positions with up to five levels of switching control.
25%
50%
75%
Solar Control, LLC | 888-550-4836
SolarControlLLC.com
8/3/2019 IQMLC-BROCHURE MechoSystems MechoShade
4/4
MechoShade Systems, Inc.
42-03 35th Street Long Island City New York 11101 Tel: 718-729-2020 Fax: 1 800 899-8081, 718-729-2941
Internet Web Site: http://www.mechoshade.com
SHADE and ELECTROSHADE are a registered trademark of MechoShade Systems, Inc. Long Island City, NY IQ/ MLC is a trademark of MechoShade Systems, Inc. Long Island City, NY
UCH is a registered trademark of LiteTouch, Inc., Salt Lake City Utah.
TAP
TAP TAP TAP
TAP
25%
50%
75%
M MM
LS2
LS3
LS2
LS1 LS1
LS4
LS3
M-1 M-4M-3M-2
ON
OFF
1 2 3 4 1 2 3 4
1 2 3 4 1 2 3 4
ON
OFF
ON
OFF
LS -1 LS -2
LS -3 LS -4
M-4M-3M-2M-1
1 2 1 23 4
ASSIGNMENT(DIP SWITCHES)
LS LS LS LS MS M SA
1 2 3 4 1 2 3 4
1 2 3 4 1 2 3 4
ON
OFF
ON
OFF
LS-1 LS-2
LS-3 LS-4
SS G EN DIP S I HES
LOC L SWITC ES M STESWITC
O A OT RS IG ME S
IQ/MLC IQ/MLC IQ/MLC
S S
; ; ; ;
; ; ; ;
; ; ; ;
T ree Q/MLCs / 3 Lo al Switc 2 Ma er Switc
S S
M MMMM
Assigning Local Switchesto motors is 1, 2 easy.Assign any of the 4 Local Switches to
any combination of 4 Shade Motors
controlled by the IQ/MLC to create up
to four levels of control plus Master
control:
1. Locate the appropriate Assignment
Dip Switch(s) within the IQ/MLCControl Unit for the Local Switch you
want to assign motors to.
2. Activate any combination of the four
Dip Switches to control the appropriate
motors.
Flexibility designed in.Two modes of operation: Normal Mode,
where shades may stop anywhere at any-
time and at 3 intermediate stop positions.
Uniform Mode, where shades may only
stop at pre-selected positions plus full up
and full down.This assures uniformity of
shade positioning
Alignment: Shades can be aligned with
any architectural detail by using the three
custom, user defined, intermediate mid
window positions.
Reconfiguration: Reconfigure without
rewiring. Reconfigure switching require-
ments via Assignment Dip Switches within
the IQ/MLC control unit; or add motors and
switches, by linking IQ/MLCs in series
within a low voltage control circuit.
IQ/MLCs can be wired in series with
Master Switches that control the entire
system.
Aligning shades is simpleas tapping a button.1. Tap the top and middle button simultane-
ously for 25% down default position.
2. Tap the middle button for 50% down.
3. Tap the middle and bottom button simul-
taneously for 75% down default position.
4. Tap the top button for full up default
position.
5. Tap the bottom button for full down
default position.
Please see IQ/MLC specifications for additional Local and Master Switch functionality.
Local Switches control only those shade motors that have been assigned to them within an IQ/MLC control circuit.
Master Switches control all shade motors on an IQ/MLC control circuit.
Custom user defined intermediate window positions are used in this scenario
both above the door and the architectural details in the corners.
ince1876
Solar Control, LLC | 888-550-4836
SolarControlLLC com