Invacare® ScanBed 400

Spare Part List – GB

Inva

care

® S

canB

ed 4

00

Invacare® EC-Høng A/SIdent. No: 1441215Version 01 11.2000

1

Information about using this list

Order of wearing parts/exchange kit:In the table of contents on page 3 you can see where in the list you can find the required part/kit.Wearing parts are sold in exchange kits with an order number for the entire kit.Storage rack for disassembled bedPage 1 of 2Ident. no.:Storage rack: 021960.XX

November 2000Pos. Spare parts

Ident. no.:Exchange kit

no.:021944

Pcs. Description

01 819452 4 Ferrules02 X 4 Nut M12

Order of spare parts:In the table of contents on page 3 you can see where in the list you can find the wanted part. Spare parts are soldindividuallly.The part number is as shown below marked with grey background:Storage rack for disassembled bedPage 1 of 2Ident. no.:Storage rack: 021960.XX

November 2000Pos. Spare parts

Ident. no.:Exchange kit

no.:021944

Pcs. Description

01 819452 4 Ferrules02 X 4 Nut M12

Order of a complete unit:In the table of contents on page 3 you can see where in the list you can find the wanted unit of the bed.The part number is as shown below marked with grey background:Storage rack for disassembled bedPage 1 of 2Ident. no.:Storage rack: 021960.XX

November 2000Pos. Spare parts

Ident. no.:Exchange kit

no.:021944

Pcs. Description

01 819452 4 Ferrules02 X 4 Nut M12

Painted parts and wooden parts:If a part number is followed by “.XX”, you have to fill in the colour code and/or the code for the type of wood of your bed,because the order number contains one of or both of these elements.

2

Spare parts – SB 400

2-sectioned mattress support with motor on backrest 4-54-sectioned mattress support with motor on backrest 6-74-sectioned mattress support with motor on backrest and thigh section/leg support– with back rest return 8 - 9Base with braking castor – ø75 / ø125 mm 10 - 11Base with ø125 mm central braking castor – with and without direction control 12 – 13Base SWL 250 kg with ø125 mm central braking castor – without direction control 14 – 15Bed end bow with plate incl. fittings with u-profiles 16 – 17ODA bedends incl. fittings with u-profiles 18 – 19PIGGY bedends incl. fittings with u-profiles 20 – 21FLEX III wooden bedends incl. fittings 22 – 23SANNE III wooden bedends incl. fittings 24 – 25SANNE III wooden bedends – without alum-slides – incl. fittings 26 – 27Metal side rail – Model 5519 – 5539 28 – 29Metal side rail with plastic insert – Model 5526 - 5528 30 – 31Metal side rail without vertical braces – Model 5525 32 – 33Wooden side rail BRITT III 34 – 35Support 36 – 37Mattress support extension 38 – 39Bumper wheel ø 75 mm – Model 5960 40 – 41Lifting pole – Model 5711 42 – 43Accumulator back-up 44 – 45Transportation rack for assembled bed 46 – 47Storage rack for disassembled bed 48 – 49Address list

November 2000

3

2-sectioned mattress support with motor on back restPage 1 of 2Ident. no.:2-sectioned mattress support with motor on back rest: 400.120.XX

November 2000Pos. Spare parts

Ident. no.Exchange kit

no.:1415719

Motor-set

Exchange kitno.:

1415616-XXXX

Lock fittings/ guideways

Exchangekit no.:

1415617Diverse

mountingparts

Exchangekit no.:

1415618Plasticplugs

Pcs. Description

01 215989 2 Handle for mattress - plastic02 1 Back rest03 321562 X 1 Control CB 09

819430813212

XX

11

Cable for UKSign for UK control

04 821240 X 1 Wire mark ”1”05 818360 X 1 Lock cam for control unit06 819411 X X 2 Pipe pin07 321561 X 1 Motor – back rest08 1 Leg support09 X 1 Plastic cap10 4 Tubular rivet11 X 2 Ferrules12 1 Top frame – foot13 X 1 Distance piece14 X 1 Lock ring ø615 X 1 Lock ring ø816 X 1 Pin17 X 1 Pin18 X 1 Raise fitting19 X 2 Ferrules20 X X 9 Screw, self boring ø5.5x1921 X 2 Lock fittings incl. lock system22 X X 1 Equalizing plate23 X 2 Screw M8x1224 321520.60 2 Insertion25 X 1 Allen key26 319157 X 1 Hand control box27 X 2 Thumb screw28 X 1 Guideway – left29 1 Top frame – head30 X 1 Guideway – right31 2 Sign for placement of metal side

rail32 X 1 Potiential equalizing socket33 X 2 Ferrules34 X 1 Ferrules35 X 2 Ferrules

4

2-sectioned mattress support with motor on back restPage 2 of 2Ident. no.:2-sectioned mattress support with motor on back rest: 400.120.XX

November 2000

5

4-sectioned mattress support with motor on back rest and thigh section /leg supportPage 1 of 2Ident. no.:4-sectioned mattress support with motor on back rest and thigh section / leg support: 400.132.XX

November 2000Pos. Spare parts

Ident. no.Exchange kit

no.:1415718

Motor-setBack rest

Exchange kitno.:

021937Motor-setThigh-/legsupport

Exchange kitno.:

1415620Lock fittings/ guideways

Exchange kitno.:

1415621Plastic plugs

Pcs. Description

01 215989 2 Handle for mattress – plastic02 1 Back rest03 321562 X 1 Control CB 09

819430813212

XX

11

Cable for UKSign for UK control

04 321561 X 1 Motor – back rest05 819411 X X 4 Pipe pin06 818360 X 1 Lock cam for control07 821240 X 1 Wire mark ”1”08 1 Thigh section09 6 Tubular rivet10 1 Leg support11 1 Lifter – thigh section / leg

support12 X 2 Plastic washer13 2 Screw M10x1614 321557 X 1 Motor – thigh section / leg

support15 821242 X 1 Wire mark ”3”16 2 Bearing bush17 1 Top frame foot18 X 9 Screw self boring ø5.5x1919 X 2 Lock fittings incl. lock system20 X 1 Equalizing plate21 2 Washer22 X 2 Screw M8x1223 321520.60 2 Insertion24 X 1 Allen key25 319157 X 1 Hand control box26 X 2 Thumb screw27 X 1 Guideway - left28 1 Top frame - head29 X 1 Guideway - right30 2 Sign for placement of metal side

rail31 X 1 Potientiale equalizing socket32 X 2 Ferrules33 X 1 Ferrules34 X 2 Ferrules

6

4-sectioned mattress support with motor on back rest and thigh section/leg supportPage 2 of 2Ident. no.:4-sectioned mattress support with motor on back rest and thigh section/leg support: 400.132.XX

November 2000

7

4-sectioned mattress support with motor on back rest and thigh section /leg support –Page 1 of 2with back rest returnIdent. no.:4-sectioned mattress support with motor on back rest and thigh section / leg support – with back rest return: 400.136.XX

November 2000Pos. Spare parts

Ident. no.Exchange kit

no.:1415718

Motor-setBack rest

Exchange kitno.:

021937Motor-setThigh-/legsupport

Exchange kitno.:

1415620Lock fittings/ guideways

Exchange kitno.:

1415622Plastic plugs

Pcs. Description

01 215989 2 Handle for mattress - plastic02 1 Back rest03 2 Slide shoe04 2 Lug05 2 Starlock button06 2 Plasticrulle07 1 Lifter – back rest08 2 Bearing bush09 2 Fixing tube10 818360 X 1 Lock cam for control11 821240 X 1 Wire mark ”1”12 321561 X 1 Motor - back rest13 819411 X X 4 Pipe pin14 321562 X 1 Control CB 09

819430813212

XX

11

Cable for UKSign for UK control

15 1 Thigh section16 8 Tubular rivet17 1 Leg support18 1 Lifter – thigh section / leg

support19 2 Bearing bush20 2 Screw M10x1621 X 2 Plastic washer22 321557 X 1 Motor – thigh section / leg

support23 821242 X 1 Wire mark ”3”24 1 Top frame foot25 X 9 Screw self boring ø5.5x1926 X 2 Lock fittings incl. lock

system27 X 1 Equalizing plate28 2 Washer29 X 2 Screw M8x1230 321520.60 2 Insertion31 X 1 Allen key32 319157 X 1 Hand control box33 X 2 Thumb screw34 X 1 Guideway - left35 1 Top frame - head36 X 1 Guideway - right37 2 Sign for placement of metal

side rail38 X 1 Potientiale equalizing socket39 X 2 Ferrules40 X 1 Ferrules

8

4-sectioned mattress support with motor on back rest and thigh section /leg support –Page 2 of 2with back rest returnIdent. no.:4-sectioned mattress support with motor on back rest and thigh section / leg support – with back rest return: 400.136.XX

November 2000

9

Base with ø75 / ø125 mm braking castorPage 1 of 2Ident. no.:Base with ø75 mm braking castor: 400.462.XXBase with ø125 mm braking castor: 400.461.XX

November 2000Pos. Spare parts

Ident. no.Exchange kit

no.:1415623Diverse

mountingparts

Exchange kitno.:

021939Motor-set

Exchange kitno.:

021958ø75 mmbrakingcastor

Exchange kitno.:

021944ø125 mmbrakingcastor

Pcs. Description

01 X 1 Spring02 X 2 Bearing shell03 1 Outer shear arm04 X 4 Slide shoe05 X 4 Bearing bush06 1 Inner shear arm07 X 1 Motor08 X 1 Wire mark ”2”09 819411 X 4 Pipe pin ø10x5010 X 2 Turning bush11 X 2 Tube12 X 2 Screw M12x5513 X 4 Ferrules14 X X 4 Nut15 X X 4 Springwasher16 X X 4 Braking castor17 X X 4 Screw18 1 Base19 X 2 Washer M12

10

Base with ø75 / ø125 mm braking castorPage 2 of 2Ident. no.:Base with ø75 mm braking castor: 400.462.XXBase with ø125 mm braking castor: 400.461.XX

November 2000

11

Base with ø125 mm central braking castor – with and without direction controlPage 1 of 2Ident. no.:Base with ø125 mm centralbraking castor: 400.465.XXBase with ø125 mm centralbraking castor with direction control: 400.466.XX

November 2000Pos. Spare parts

Ident. no.:Exchange kit

no.:1415624Diverse

mountingparts

Exchange kitno.:

021939Motor-set

Pcs. Description

01 1 Outer shear arm02 X 4 Slide shoe03 X 4 Bearing bush04 1 Inner shear arm05 X 4 Pipe pin06 X 1 Motor07 X 1 Wire mark ”2”08 2 Self boring screw ø4.2x2509 2 Stop10 317847.XX/L 1 Braking pedal - left11 4 Screw M8x1212 6 Nylon washer13 X 2 Bush14 X 2 Plastic bush15 X 2 Washer16 X 2 Cover for central braking castor17 X 2 Screw M12x5518 821202 0 / 1 ø125 mm central braking castor with direction control19 1 Axle20 2 Retainer21 0 / 1 Spiral clamp pin ø5x3622 2 Pedal rubber - red23 X 2 Pedal rubber - green24 317847.XX/R X 1 Braking pedal - right25 1 Central braking rod26 2 Spiral clamp pin ø5x1427 4 Starlock button28 4 Washer M829 2 Centerscrew M6x830 X 1 Axle31 3 / 4 ø125 mm centralbraking castor32 1 Base33 X 4 Ferrules34 X 1 Spring35 X 2 Bearing shell

12

Base with ø125 mm centralbraking castor – with and without direction controlPage 2 of 2Ident. no.:Base with ø125 mm centralbraking castor: 400.465.XXBase with ø125 mm centralbraking castor with direction control: 400.466.XX

November 2000

13

Base SWL 250 kg with ø125 mm central braking castorPage 1 of 2Ident. no.:Base SWL 250 kg with ø125 mm central braking castor: 400.470.XX

November 2000Pos. Ident. no. Exchange kit

no.:1415625Diverse

mountingparts

Exchange kitno.:

020715Motor-set

Pcs. Description

01 1 Outer shear arm02 X 4 Slide shoe03 X 2 Pipe pin ø10x6004 1 Inner shear arm05 X 1 Motor06 X 1 Wire mark ”1”07 317847.XX/L 1 Braking pedal – left08 4 Screw M8x1209 6 Nylonwasher10 821201 4 Central braking castor ø125 mm11 1 Axle12 2 Centerscrew M6x813 2 Retainer14 1 Spiral clamp pin ø5x3615 X 2 Pedal rubber - red16 2 Screw M12x5517 X 2 Bush18 X 2 Turning bush19 X 2 Washer M1220 317847.XX/R 1 Braking pedal - right21 X 2 Pedal rubber - green22 1 Central braking castorstang23 1 Spiral clamp pin ø5x1424 4 Starlock button25 4 Springwasher26 1 Axle27 2 Cover for central braking castor28 8 Screw ø4.2x1329 1 Base30 4 Ferrules31 X 2 Pipe pin ø10x5032 X 1 Spring33 X 2 Bearing shell

14

Base SWL 250 kg with ø125 mm central braking castorPage 2 of 2Ident. no.:Base SWL 250 kg with ø125 mm central braking castor: 400.470.XX

November 2000

15

Bedend bow with plate incl. fittings with u-profilesPage 1 of 2Ident. no.:Bedend bow with plate incl. fittings with u-profiles: 400.204.XX

November 2000Pos. Exchange kit

no.:1415626

Pcs. Description

01 2 Bedend bow without bedend02 2 Bedend 8 mm03 4 Chip board screw ø2.5x1004 1 Fittings with u-profil – head - left05 1 Fittings with u-profil – head - right06 X 8 Membrane nipple07 1 Fittings with u-profil – foot - left08 X 4 Screw M8x1209 1 Fittings with u-profil – foot - right

16

Bedend bow with plate incl. fittings with u-profilesPage 2 of 2Ident. no.:Bedend bow with plate incl. fittings with u-profiles: 400.204.XX

November 2000

17

ODA bedends incl. fittings with u-profilesPage 1 of 2Ident. no.:ODA bedends incl. fittings with u-profiles: 400.205.XX

November 2000Pos. Exchange kit

no.:1415626

Pcs. Description

01 2 ODA bedend02 1 Fittings with u-profil – head - right03 1 Fittings with u-profil – head - left04 X 8 Membrane nipple05 1 Fittings with u-profil – foot - left06 X 4 Screw M8x1207 1 Fittings with u-profil – foot – right

18

ODA bedends incl. fittings with u-profilesPage 2 of 2Ident. no.:ODA bedends incl. fittings with u-profiles: 400.205.XX

November 2000

19

PIGGY bedends incl. fittings with u-profilesPage 1 of 2Ident. no.:PIGGY bedends incl. fittings with u-profiles: 400.206.XX

November 2000Pos. Exchange kit

no.:1415626

Pcs. Description

01 2 PIGGY bedend02 1 Fittings with u-profil – head - right03 1 Fittings with u-profil – head - left04 X 8 Membrane nipple05 1 Fittings with u-profil – foot - left06 X 4 Screw M8x1207 1 Fittings with u-profil – foot – right

20

PIGGY bedends incl. fittings with u-profilesPage 2 of 2Ident. no.:PIGGY bedends incl. fittings with u-profiles: 400.206.XX

November 2000

21

FLEX III wooden bedends incl. fittingsPage 1 of 2Ident. no.:FLEX III wooden bedends incl. fittings: 400.208.XX

November 2000Pos. Exchange kit

no.:1415627

Pcs. Description

01 2 Wooden bedends – FLEX III02 1 Fittings – head - left03 1 Fittings – foot - left04 X 8 Furniturescrew M6x4005 1 Fittings – foot – right06 X 4 Screw M8x1207 1 Fittings – head - right

22

FLEX III wooden bedends incl. fittingsPage 2 of 2Ident. no.:FLEX III wooden bedends incl. fittings: 400.208.XX

November 2000

23

SANNE III wooden bedends incl. fittingsPage 1 of 2Ident. no.:SANNE III wooden bedends (cherry / beech - mix) incl. fittings: 400.211.X7SANNE III wooden bedends incl. fittings: 400.212.XX

November 2000Pos. Exchange kit

no.:1415631

Pcs. Description

01 X 12 Thread bush02 X 4 Fittings03 X 12 Screw M8x2004 2 SANNE III wooden bedends05 2 Insertion – head06 4 Screw M8x1207 4 Spring lock08 2 Insertion – foot09 4 Tube

24

SANNE III wooden bedends incl. fittingsPage 2 of 2Ident. no.:SANNE III wooden bedends (cherry / beech - mix) incl. fittings: 400.211.X7SANNE III wooden bedends incl. fittings: 400.212.XX

November 2000

25

SANNE III wooden bedends – without alum-slides - incl. fittingsPage 1 of 2Ident. no.:SANNE III wooden bedends (cherry / beech - mix) – without alum-slides - incl. fittings: 400.213.X7

November 2000Pos. Exchange kit

no.:1415631

Pcs. Description

01 X 12 Threadbush02 X 4 Fittings03 X 12 Screw M8x2004 2 SANNE III wooden bedends without alum-slides05 2 Insertion – head06 4 Screw M8x1207 4 Spring lock08 2 Insertion – foot09 4 Tube

26

SANNE III wooden bedends – without alum-slides - incl. fittingsPage 2 of 2Ident. no.:SANNE III wooden bedends (cherry / beech - mix) – without alum-slides - incl. fittings: 400.213.X7

November 2000

27

Metal side rail – Model 5519 – 5539Page 1 of 2Ident. no.:Metal side rail – Model 5519 – for 200 cm mattress support: 50.55190.XX/L+RMetal side rail – Model 5539 – for mattress support extension: 50.55390.XX/L+R

November 2000Pos. Exchange

kitno.:

020025

Exchangekitno.:

020026

Pcs. Description

01 X 6 Ferrules02 X 2 Release button03 X 2 Check pawl04 X 2 Spring05 1

1Side rail – leftSide rail – right

06 X 6 Ferrules07 X 4 Thumb screw

28

Metal side rail – Model 5519 – 5539Page 2 of 2Ident. no.:Metal side rail – Model 5519 – for 200 cm mattress support: 50.55190.XX/L+RMetal side rail – Model 5539 – for mattress support extension: 50.55390.XX/L+R

November 2000

29

Metal side rail – Model 5526 – 5528Page 1 of 2Ident. no.:Metal side rail – Model 5526 – for 200 cm mattress support: 50.55260.XX/L+RMetal side rail – Model 5528 – for mattress support extension: 50.55280.XX/L+R

November 2000Pos. Spare parts

Ident. no.Exchange kit

no.:020025

Exchange kitno.:

020026

Pcs. Description

01 X 6 Ferrules02 X 2 Release button03 X 2 Check pawl04 X 2 Spring05 1

1Side rail – leftSide rail – right

06 X 6 Ferrules07 X 4 Thumb screw08 421843 4 Plastic indlæg09 421468 4 Cylinder nut

30

Metal side rail – Model 5526 – 5528Page 2 of 2Ident. no.:Metal side rail – Model 5526 – for 200 cm mattress support: 50.55260.XX/L+RMetal side rail – Model 5528 – for mattress support extension: 50.55280.XX/L+R

November 2000

31

Metal side rail without vertical braces – Model 5525Page 1 of 2Ident. no.:Metal side rail without vertical braces – Model 5525 – for 200 cm mattress support: 50.55250.XX/L+R

November 2000Pos. Spare parts

Ident. no.Pcs. Description

01 1 Upright bow02 4 Hinged joint - male03 6 Hinged joint – female04 3 Tube05 1 Upright with lock06 1 Release lever07 803849 1 Spiral clamp pin ø3x2008 422150 1 Button for check pawl09 1 Check pawl10 1 Spring11 1 Cover for Pop-rivet12 1 Pop-rivet13 421468 2 Cylinder nut14 1 Stiffener with lock tube15 2 Ferrules16 421843 2 Plastic insert17 2 Thumb screw M6x4518 1 Ferrules19 1 Rivet20 1 Nylon washer21 1 Bearing bush

32

Metal side rail without vertical braces – Model 5525Page 2 of 2Ident. no.:Metal side rail without vertical braces – Model 5525 – for 200 cm mattress support: 50.55250.XX/L+R

November 2000

33

Wooden side rail – BRITT IIIPage 1 of 2Ident. no.:Wooden side rail BRITT III for 200 cm mattress support: 1415615.XXWooden side rail BRITT III for extensioned mattress support: 020774.XX

November 2000Pos. Exchange kit

no.:020023

Exchange kitno.:

020024

Pcs. Description

01 X X 8 Connecting bolt, female02 2 Wooden side rail, upper03 X X 4 Chip board screw ø3x2004 X 8 Rubber insertion for release lever05 X 8 Release lever06 X 4 Wire07 X 4 Slide-walle08 X 4 Pin09 X 4 Check pawl, right10 4 Beeche list11 1 Wooden side rail, lower12 X 4 Spring13 X 4 Check pawl, left14 X X 8 Connecting bolt, male

34

Wooden side rail – BRITT IIIPage 2 of 2Ident. no.:Wooden side rail BRITT III for 200 cm mattress support: 1415615.XXWooden side rail BRITT III for extensioned mattress support: 020774.XX

November 2000

35

SupportPage 1 of 2Ident. no.:Support – 40 x 50 cm: 021963.XXSupport – 25 x 30 cm: 021964.XX

November 2000Pos. Spare parts

Ident. no.Pcs. Description

01 1 Support02 821251 2 Thumb screw M6x4503 421843 2 Plastic insert04 421468 2 Cylinder nut

36

SupportPage 2 of 2Ident. no.:Support – 40 x 50 cm: 021963.XXSupport – 25 x 30 cm: 021964.XX

November 2000

37

Mattress support extensionPage 1 of 2Ident. no.:Mattress support extension: 020493.XX

November 2000Pos. Pcs. Description

01 1 Mattress support extension02 2 Tube03 2 Screw M8x12

38

Mattress support extensionPage 2 of 2Ident. no.:Mattress support extension: 020493.XX

November 2000

39

Bumper wheel ø75 mmPage 1 of 2Ident. no.:Bumper wheel ø75 mm: 50.59600.00

November 2000Pos. Pcs. Description

01 4 Bush02 4 Bumper wheel03 4 Screw

40

Bumper wheel ø75 mmPage 2 of 2Ident. no.:Bumper wheel ø75 mm: 50.59600.00

November 2000

41

Lifting pole – Model 5760Page 1 of 2Ident. no.:Lifting pole – Model 5760: 50.57600.XX

November 2000Pos. Exchange kit

no.:020028

Pcs. Description

01 X 1 Thumb screw M6x1602 1 Lifting pole, welded03 X 1 Handle for lifting pole, complete04 X 1 Plug for lifting pole

42

Lifting pole – Model 5760Page 2 of 2Ident. no.:Lifting pole – Model 5760: 50.57600.XX

November 2000

43

Accumulator back-upPage 1 of 2Ident. no.:Accumulator back-up: 1415612-XXXX

November 2000Pos. Spare parts

Ident. no.Pcs. Description

01 4 Screw M5x1602 2 Suspension for accumulator back-up03 1415606 1 Control04 819411 2 Pipe pin05 320593 1 Accumulatorbox incl. accumulators06 4 Lock nut M507 321561 1 Motor – back rest

44

Accumulator back-upPage 2 of 2Ident. no.:Accumulator back-up:

November 2000

45

Transportation rack for assembled bedPage 1 of 2Ident. no.:Transportation rack: 021959.XX

November 2000Pos. Exchange kit

no.:021944

Exchange kitno.:

1415628

Pcs. Description

01 X 2 Thumb screw M8x3002 1 Upright03 X 2 Ferrules04 1 Slide rachet05 1 Support tube06 1 Bottom frame07 X 4 Nut M1208 4 Ferrules09 X 4 Screw M12x3010 X 4 Springwasher11 X 4 Wheel ø125 mm12 2 Screw M8x1613 X 1.5 m Safety-walk – non-skid tape

46

Transportation rack for assembled bedPage 2 of 2Ident. no.:Transportation rack: 021959.XX

November 2000

47

Storage rack for disassembled bedPage 1 of 2Ident. no.:Storage rack: 021960.XX

November 2000Pos. Spare parts

Ident. no.:Exchange kit

no.:021944

Pcs. Description

01 819452 4 Ferrules02 X 4 Nut M1203 1 Storage rack04 X 4 Springwasher05 X 4 Braking castor ø125mm06 X 4 Screw M12x3007 6770197 2 Belt

48

Storage rack for disassembled bedPage 2 of 2Ident. no.:Storage rack: 021960.XX

November 2000

Customer Sales and Service

INVACARE A/SSdr. Ringvej 39DK-2605 BrøndbyPhone: +45 36 90 00 00Fax: +45 36 90 00 01

INVACARE Deutschland GmbHDehmer Strasse 66D-32549 Bad OeynhausenPhone: +49 57 31 754 0Fax: +49 57 31 754 150

INVACARE AS Grensesvingen 9P.O. Box 6230 / EtterstadN-0603 Oslo Phone: +47 22 57 95 00Fax: +47 22 57 95 01

INVACARE N.V.Autobaan 14B-8210 Loppem, Brügge Phone: +32 50 83 10 10 Fax: +32 50 83 10 11

INVACARE ABFagerstagatan 9 / Box 66S-163 91 Spånga Phone: +46 8 761 70 90Fax: +46 8 761 81 08

INVACARE B.V.Celsiusstraat 46 NL-6716 BZ EdePhone: +31 318 69 5 757Fax: +31 318 69 5 758

INVACARE LTDSouth RoadBridgend Industrial Estate UK-Bridgend, CF31 3PYPhone: +44 1 656 664 321Fax: +44 1 656 667 532

INVACARE Poirier S.A.Les RochesF-37230 FondettesPhone: +33 2 47 62 64 66Fax: +33 2 47 42 12 24

Manufacturer:

INVACARE EC-Høng A/SØstergade 3DK-4270 HøngPhone: +45 58 85 27 22Fax: +45 58 85 43 86www.invacare.com

INVACARE S.R.L.Via dei Pini 62I-36016 Thiene (VI)Phone: +39 0445 380059Fax: +39 0445 380034