Upload
oberon-introspect-biospect
View
99
Download
2
Tags:
Embed Size (px)
DESCRIPTION
BIORESONANCE DEVICES FOR NON-LINEAR BODY SCANNING TECHNOLOGY (NLS)
Citation preview
Contents: Program "Introspect"……………………………………………………………………4
Administrator ........................................................................................................ 7 Patient’s index data ............................................................................................ 11 Examination procedure ...................................................................................... 15 Saving to disk ...................................................................................................... 18 How to determine the modulation resonance frequency ....................................... 21 Analysis (examination)....................................................................................... 22 Preparing medicine ............................................................................................ 23 Standards ........................................................................................................... 25 Analysis .............................................................................................................. 37 Collecting data ................................................................................................... 43 Comparative analysis ........................................................................................ 44 Entropic analysis ................................................................................................. 45 NLS Analysis ...................................................................................................... 47
Program Introspect
Introspect Program is meant for computer nonlinear analysis and virtual informative testing of
bioactive supplements.
www.introspect-eu.com
Program Introspect
If you press the button "Program Setup" you will see
the setup layout, where you can change the language
(choose Russian or English), also turn on/off the sound,
change the font size and correct the processor deviation
if needed. To correct the processor
deviation you need to move the triangle sign above the scale to correct the
estimation point grade on the organ
projection if the point estimation
parameters change due to the processor
peculiar features compared to the
standards of the processor chosen upon
authorization.
To chose the analysis performing operator from the list, press the button "Operators".
When you run the program you will see the set of
buttons called Main Menu. To start working with the
program click the button "Examination
(Analysis)".
To obtain the data concerning the software designers
press the button “Developers”.
.
Program Introspect
Here you are entitled to: Press the button "Color" to make colored pictures, if you click this button twice the pictures will become black-and-white.
The button "Index Color" allows to mark the names of the organs with different functional capabilities with various colors
in the examinations performed.
Green line means the organs are without any marked functional deviations.
Red line means the organs have slight functional deviations.
Brown line means the organs have marked functional deviations.
The button "Exit" allows to quit the program.
Administrator The button "Administrator" allows the equipment owner to enter the
administration mode of operation which gives the exclusive rights to:
- Setup (change) the password in the administration mode by pressing the button
"Change password";
- Open or close patients’ card index filing for other users by pressing the button
"Close card index"
- Turn on or off the mode fixing the payment made by patient for the performed
analysis by pressing the button "Register payment"
To delete the patient’s card
press the button "Delete card"
In the right column, to delete a
single examination record press the
button "Delete analysis" above the
list of examinations.
Administrator
To delete the information about all
examinations of all patients performed
before the specific date press the button
"Delete on date basis". Specify the
date in the window "Delete on date
basis"; all examinations performed
before the specified date will be deleted.
To find the list of the operating specialists using this equipment press the button "Choose operator". If
you choose the last name of any individual
specialist you will see the card index of all his
patients.
To widen the range of operating specialists using this equipment you can press the button "New" in
this catalogue; also you can exclude several users
from the list by pressing the button "Delete", the
card index of the patients supervised by such users
will be automatically deleted. To move the patient’s
card from one specialist to the other press the
button "Exchange".
Administrator
To perform the statistic analysis concerning the period of analysis and the quantity of patients
examined and the quantity of examinations
performed individually by each user and all
specialists together and also to perform financial
analysis of each scientific department activity
press the button "Report".
Program Introspect
Before the examination the patient is sitting
in front of the monitor with earphones on,
which have built-in magnetic-inductive devices. The
ear-phones have to be put on in accordance with the
following signs: R is for the right temporal part, L is
for the left temporal part. The infra-red transmitter
has to be put symmetrically in front of the eyes not
father than 80 cm (it exist only in old versions of device).
The card of the patient
When the button "Analysis" is pressed you
can see the "Patient’s card", which
contains all his/her relevant data: last
name, first name, middle name, age,
gender, address, and also the telephone
number can be indicated if available.
"Saving to floppy disk" allows to save the examination data and results of the chosen patient to floppy disk with further possibility to copy this information to the program.
The below table contains the complete information concerning the examination
of the selected patient.
If you press the button "New" you will see the form which has
to be filled in according to requirements. It is necessary to
indicate the last name, the first name, the middle name, age,
address, telephone; gender is indicated by choosing from the
list.
The card of the patient
If you press the button "Choice" you will
see the the layout of "Patients’ Card
Index", which contains the information
about all patients supervised by the
chosen specialist, the following
information will be available: the last
name, the first name, the middle name, age, gender, address and telephone if
available. Please note that this form can be
closed by the administrator if necessary. To
find promptly the card of a specific patient
in such layout enter his name (or first letters
of his name might be sufficient in some
cases) into the line "Patients’ Card
search". The similar search system is
applied in "Patient’s card" layout.
To print out the recommendations prescribed by the specialist on the basis of the examination results press the
button "Print the conclusion".
The card of the patient
If you press the button "Print the Examinations" the examinations’ results
are prepared to be printed.
The program allows to print up to 4
pictures with 100X100 mm size on one A4
formatted list.
Besides, there is a possibility to look up
the older "Recommendations", by
depicting for analysis and printing (buttons
"Recommendations" and "Print
Recommendations") the master
processes with large spectral
diagrams taken from the patient (where the difference coefficient (D) is
less than 0.425).
The program allows to print the most
efficient bioactive supplements,
determined by the specialist on the
basis of the performed analysis or to
adjust the supplements prescribed earlier
by exiting the print preparation layout and
going to the analysis operation mode
(button
"Examination (Analysis)") To print the additional recommendations and notes prescribed by the specialist to the specific patient press the button
"Print Notes".
To stop printing in order to print on both sides of the sheet please press "Pause between pages".
To make the pictures colored press the button "Color", if you turn it off the pictures will be black-and-white.
To print press the button "Print".
The card of the patient
If you press the button "Diagram" under the picture
of the examined system you will see the diagram
with frequency-domain measurements of existing
system, which was taken while the examination
was performed. To return to the organ picture press
the button "Picture".
The main elements of managing "Patient’s card menu":
"Current Analysis" is the current analyses of the results of the examination performed with the possibility of conducting additional analysis by connecting
the patient up to the device or without connection (in this case the button
"View the Results " is pressed).
"Comparative Analysis" is the comparative analysis of the results of
several analysis when the patient’s systematic examinations are performed.
If you press the button "Examination" you will see the layout of "Examination
Procedure"
Examination Procedure Layout “Examination Procedure” is meant to prepare the
object for examination.
To perform the automatic choice for profound detailed analysis of biological system depending on the marked
deviations from the existing norms in it’s elements press the button "Program Selection".
The button "Personal choice" allows the operator to choose individually or exclude several pictures from
Examination Procedure "Examination Procedure" list by putting or removing the flags on the left side from the name of the picture by pressing the left button on the mouse. The button "Cancel choice" removes the examination scheme of all pictures.
The button "Restore choice" restores the examination scheme of all pictures.
The button "Alphabetic order" classifies all pictures alphabetically.
The button "Card index" allows to enter Card Index menu.
The button "Current Analysis" shows the current analysis of the examination results.
The button "Supplement (Medicine)" allows to prepare the supplement automatically for the pictures, where the centers have been defined. After pressing this button it is essential to define the necessary settings in “Supplement Preparation”
menu and press the button "Start Preparation".
The Examination Nature:
Express allows to perform the analysis based on complete topographic
pictures without detailed elaboration.
Standard allows to examine specific biological structures only
when pathologic changes are present.
Detailed allows to evaluate the structure of all biological formations that can
be essential to perform the qualitative scientific investigations.
Examination Procedure
By pressing the corresponded icon in the mode "Icons" you can enter the examination procedure of the icon which
is anatomically or functionally linked with the original picture of the object without using the textual diagram
of the examination (or if it has been examined already you can enter to the mode of current analysis).
Saving to floppy disk
If you press the button "Save to
floppy disk" you will see a special
layout in the card index which allows to
copy the examination data of individual
patients to floppy disk or from floppy
disk to the existing patients data
catalogue.
First of all the saving mode has to be selected: "From program"
or "To program"
"From program" allows to copy the examination data of individual
patients to floppy disk.
Saving to floppy disk
You can correct the examinations list of the chosen patient before
saving it to floppy disk by putting or removing flag marks.
Further press the button "Create a list" and the chosen
examinations will be transmitted to the right part of the layout.
The button
"Clear the
list" removes
the whole list of
patients and
examinations
which are to be
copied (without
deleting the
original).
To start saving
to floppy disk
insert the floppy disk to the disk drive and press the button "Saving to
disk" or chose the source where the chosen information has to be copied.
Saving to floppy disk
The button "Cancel choice" removes
the flag marks from the examinations’
list prepared for being copied.
"Delete" button removes the chosen examination from the list of
examinations ready for being copied.
"Picture" button allows to see the
picture of the chosen examination of
the precise patient.
To exit the copy mode press the
button "Exit".
The "Program" button allows to copy the examination data from the floppy disk to the existing patients’ catalogue in the computer. When choosing this mode, please indicate the source of data (floppy disk, CD) and in the list of patients and
their examination data ready to be copied to the computer will be displayed in the right part of the layout. To enter this
data to the program from the floppy disk press the button "Copy".
How to determine the modulation resonance frequency
Organ pulsing picture.
The button "Stop/continue" allows to
make a pause in the examinations. If you want to continue the automatic examination press the “Continue” button. Press button “Back” to go to the “Examination Procedure”.
The mode “ Determination of the modulation resonance frequency” offers the possibility to determine the spectral characteristic of the lesion focus, all main buttons are similar to the mode of determination of system modulation resonance frequency.
The scale of the on-off time ratio of
the impulse of the signal under study.
The diagram of measured signal
amplitude distribution according to
standard frequencies 1.8 - 8.2 Hertz.
Comparative diagram of the noise level in the system in decibals.
Relative diagram in points showing
correlation of efficient signal/noise.
In the bottom of the screen there is a
picture of logarithmic polychromy
Fleindler’s scale.
Анализ
The mode "Examination" allows to
measure the intensity of the destructive
process in the control data points which
are located in the standard places on the
picture, the results are estimated at the
6-grade polychromy Fleindler’s scale, it’s
buttons are on the screen bottom at the
right corner. The button "Stop/continue" allows to make a pause in the examinations.
Press the button "Exit" to go to
“Examination Procedure” mode.
Grades estimation of the results of NLS Analysis.
1. Latent functional activity level.
2. Optimal regulation level. 3. Characteristics at the higher level,
tension status of regulatory systems.
4. Asthenic status of regulatory
mechanisms.
5. Compensated abnormalities of the adaptation mechanisms.
6. Decompensation of the adaptation mechanisms, marked destructive processes.
Analysis
It is important to remember that the offered grades scale is set up mostly for characterizing the dynamic of the adaptation reserves increase/decrease; even the stable destructive status without evidently marked dynamic changes is
poorly registered in such scale.
Natural frequency of the lesion focus is transformed into the frequency of opposite polarity but identical form and as a transformed and enforced information is recorded to such matrix as water, ethyl alcohol, sugar, paraffin. The water with recorded information is recommended to stop the acute process. Such water supplement is effective for 2-3 weeks only, after that period the medicine is not effective. Alcohol is used to treat the sub-acute or chronic processes. In order to eliminate the chronic process it is recommended to use also alcoholic solution of phytomedications, since it
Preparing Medicine
Preparing medicine
prolongs it’s efficiency period. Effectiveness of the alcohol based medicine lasts up to 2-3 months and 4-6 months is effective for medicine based on alcoholic solution.
To eliminate the chronic processes it is possible to record the information to milk sugar, in this case the medicine will be
effective for 6-9 months, but the sugar has to be slightly moistened with alcohol or water while the medicine is being
prepared.
One dose for acute critical process treatment is 4-8 drops or peas 3 times a day. For children younger than 14 is
for 2-3 drops less. For sub-acute and chronic processes treatment the dose equals to 2-4 drops (peas) once or twice per day. For
children younger than 14 is for 1-2 drops less.
Paraffin is applied in dermatological treatments for skin pathology and for cases with peripheral nervous system lesion
(radiculitis, neuralgia, lumbodynia).
To stop the acute processes it is possible to record from 2 to 4 medications for one matrix in single-step operation. For
stopping the sub-acute and chronic processes the medication quantity can be increased up to 6-8 items.
It is important to remember that the more apparent the voltage of the recorded medicines is the less medicine quantity can
be recorded to the matrix.
The button "Start preparation" initiates the medicine preparation process, the button "Stop preparation" terminates
the medicine preparation process.
The button "Invert" allows to modify the output signal into opposite polarity signal. Such mode allows to record the
medicines successively from various lesion focuses evident in one and the same organ (body slice). To switch the lesion focuses press the left button on the mouse when pointing the arrow to the focus in question.
Standards
and etc. When the frequency characteristics are taken form the tissue, the
program can compare them on the basis of their spectral similarity to the standard
processes data (healthy, pathologically modified tissues, infection agents) and
reveal the most similar pathological process or tendency for its acquisition. Using
this analysis procedure you can monitor the status of the incoming signal (it is
marked with red color (S)) and outgoing signal (it is marked in blue (N)). They are
shown as diagrams on the screen. Looking at these diagrams it is possible to determine
Each cell has its unique specific
oscillations, which are recorded to the
computer memory and can be displayed
at the screen as a diagram which
reflects the conditions of information
exchange happening between the tissue
and its environment. Each pathological
process has also its unique exclusive diagram. The computer memory
contains a huge number of pathological
processes with different considered
deviations such as process intensity,
age, gender
\
Эталоны
which standard process is closer to the one displayed and also to monitor the spectral similarity degree between the
standard process and the patient’s diagram data.
"Group list" contains the list of the
organs’ groups.
“Organomedicine” contains the
standards of the spectral
characteristics of the healthy tissues.
The "Standards List" below contains standards which are organized on the
basis of spectral similarity decrease
with the object under study. Healthy
tissues almost do not have any
differences or dissociation between
incoming and outgoing signals (red and
blue diagrams correspondently). The
less the differences between the
organomedicine and the object are,
the more integral the examined tissue
is, the more such differences are the
less integral the tissue is.
Standards
Biochemical Homeostasis
the index mode, and the extremes values 1 and 7 will characterize the figures value of the biochemical indexes beyond the bounds of the physiological standard
norms, lower and upper correspondently.
The results of the biochemical analysis on computer will be correct only if the
standard rules for carrying out the biochemical analysis by traditional methods in
the clinic are applied.
Allows to perform the qualitative estimation of the main biochemical
data via wave undulate tissues
functions. The evaluation of the
biochemical homeostasis is
performed in the NLS Analysis mode.
It is necessary to remember that the
lowest indexes of the enzymes
(hormones) concentration within the standard range should be at the
point 2 on the diagram, the upper
indexes within the standard range
should be at the point 6. The figures
value at the rate 3,4,5 corresponds to
Standards
PATHOMORPHOLOGY
Here you can find the list of standards applied for destructive processes. This
section contains the main patho-
morphological conditions inherent to
the individual organism tissues. Each
destructive process has its own specific
diagram.
Standards
Microorganisms and Helminths
This section contains the main characteristics of infection agents: bacteriums, viruses, riketcias of mycoplasma, fungi and helminths. Usually the highest dissociation level can be seen in the frequencies where the tissue frequencies to
which they have trope are present.
For example opisthorchosis has high dissociation at the
frequency level 4.9 Hertz for urogenital system.
The allopathy group contains the wave undulate characteristics of the main chemical (synthetic) drugs used in traditional
medicine.
Homoeopathy
This group contains the wave undulate characteristics of the homeopathy medicine.
Standards
Phytotherapy
This group contains the wave undulate characteristics of the medicinal plants which grow in the middle region of Russia.
Nutrients
This group contains the wave undulate characteristics of the biologically active supplements (BAS) of the main Russian and Foreign companies producing food supplements.
Allergen
This group contains the wave undulate characteristics of food, domestic, vegetative and industrial allergens.
Individual tissues’ frequencies are lie in the following standards of frequency range. 1.8 Bone system.
2.6 Crude conjunctive tissue, joints, mitral valve.
2.6-3.4 Porous conjunctive tissue, intertransverse muscular system, cardiac muscle.
3.4 Unstriped muscular system.
4.2 Monolayer flat epithelium of digestive tract.
4.9 Multilayer flat and prismatic epithelium. Parenchymatous tissue of the liver и bile-excreting tissue.
4.9-5.8 Epithelium of the kidney tissue and reproductive organs.
5.8 Gullet lymphatic plexus, upper level of the respiratory tract, lymphatic system, spleen, ovaries,
prostate. 6.6 Peripheral nervous system, bronchial epithelium, adrenals, thyroid gland.
7.4 Central sections of sensory analyzers except for optical, subcortical cerebral structure, cerebellum, limbic
system and bronchial parenchyma.
8.2 Eye retina, optic nerve, cerebral [brain] hemisphere cortex.
Standards
Next to the diagram you can see the following control
elements:
"Object" shows the diagram of the examined
biological object, organ or tissue which was taken
during the examination.
"Stndard" shows the diagram of the chosen standard
process.
"Spectrum" press this button to see the enlarged
diagram.
"Optimum" the yellow diagram shows the normal signal
distribution for standard frequencies.
"Model" shows the diagram of virtual model.
"Invert" this button allows to convert the diagram to the diagram of the opposite polarity.
The button "Clear" which is above the list of standard groups terminates the
possibility of dispersing analysis for all groups simultaneously.
Standards
The program offers the unique
possibility to compare the value of the spectral
similarity of all recorded medicine with spectral
characteristics of pathological focus. The marked
section contains the data of spectral differences
(D) of the standard data and the object. If the index is less than 0,425 this means that the spectral
similarity with the object under study is more than
95%, where this standard is marked in red. The
clinical importance for statistically reliable data
concerning the process manifestation is considered
if the value of such data does not exceed 0,750
(similarity with examined object is more than
65%).
By mathematical summing up of the spectral
characteristics of information medications it is possible to obtain the better combination of medications on the basis of
the similarity of spectral characteristics of pathological process and consequently choose the most effective medicine. The possibility of combining the frequencies of pathological agents helps to experiment with creating the virtual models
of various pathological process. The creation of such virtual models is necessary for example for choosing the
medicine groups which give better results in complex.
Standards
To sum up the standards in order to create the virtual model press the left button on the mouse in the first
column in the standards list opposite the chosen
standard. To deduct from the virtual standard mode
press the right button on the mouse. To switch off
the virtual modeling press on [X] sign in the
right column in the standards list opposite the
virtual model. If the spectral differences (D) of any
of the summed medicine and object taken separately exceed the value of their mutual combination model
then it shows the medicine synergy. If the value is
less it means interaction antagonism.
Control elements of “Standards” layout
The button "Virtual Activation" is virtual activation of pathologic process.
The process can be in the remission state when we are interested in its active status. If
you press this button the chosen standard is tuned to the spectral characteristics of the
examined object. To tune all standard processes from the standards list press the button "ALL".
Standards
"Vegeto-test" allows to use the internal vegetative resonance test mode where the
medicine is chosen from the standards catalogue. "Reprint" allows to record any medicine from the standards catalogue to the matrix
(water, alcohol, sugar, paraffin).
"Standard description" shows the detailed description of the chosen standard.
"Entropic Analysis" allows to perform the 2 factors entropic analysis of the
pathologic process.
"NLS-Analysis" allows to perform multifactor entropic analysis of the pathological
process (biochemical homeostasis of the system).
"Standard-Object" allows to perform the dispersing analysis of the optionally chosen
standard conferring on it object functions.
"Recommend" allows to mention all standards with high spectral similarity with the object under study in the printed document.
"Recommendations" displays the list of the standards chosen for print.
"Absolute model" allows to construct the most optimum virtual mode by creating a
complex program algorithm which helps to consider all possible matching of the
standards.
"Imperative model" is the function similar to “Absolute model” except for the fact
that the virtual model is created on the basis of optionally chosen one (control)
standard taken to estimate its spectrum influence on the model creation.
The sign 00 for other model standards means that the control standard’s
participation in the model creation is reduced to minimum.
Standards
The button above the list of standards:
"Fixation" allows to fix three lines in the upper part of the list:
the name of the biological object
optimal distribution
virtual model
"Sort" sorts all standards alphabetically.
"Filter" allows to mark the group of standards which have similar last word in their names.
The search line in the left lower corner under the standards list allows to find easily the necessary standard only by entering the first letters of its name.
Analysis
Buttons above the organ picture
"Text" allows to obtain information concerning the individual fragments on the picture. To obtain this information press the button "Text" and you will see symbols on the screen displayed as green crosses. To read the text put the mouse arrow to the cross and the message will be displayed next to it in the rectangle. To print this message press the left button on the mouse and tick the square on the left from the text in the layout displayed. This mode also allows to move
promptly to the picture
examination to analyze the icons
with obtained data. If you press the
button "Icons" you will see the icons.
To see which picture can be displayed
from the icon put the mouse arrow on
the icon and you will see the name of
the picture in the rectangle next to it,
press the mouse button on the icon to unfold the correspondent organ for examination.
The button "Description" allows to see the description of biological object displayed at the picture.
The button "Focuses" allows to hide or display the earlier marked focuses on the picture.
Analysis
You can also display (hide) the focus by pressing the left button on the mouse while pointing it to the focus.
Scaling: if you pres the button with "+" sign in the upper left corner of the picture it will enlarge the chosen area on the
picture. After that click on the picture and stretch the frame by moving the mouse and after you mark the necessary area
click the mouse for the second time. The second click restores the total picture from the fragment.
Analysis
"Comparative analysis" is comparative analysis of the examination results when the
patient’s case is followed-up.
"Meta-correction" if you press this button you will enter the mode which allows to
correct the influence by using the infrared scanner. It is necessary to set up the center of
impact influence on the picture projection and press the button "Start".
Analysis
"Vegetative Test"
Using the mode of vegetative resonance test gives great opportunities and the possibility to add to the personal patient’s
electro-magnetic oscillation counter the electro-magnetic oscillation of the standards from the testing set – internal
vegetative test or taken by using the resonance camera – external vegetative test and to define the effectiveness of the
biologically active supplements (BAS) or their influence on the patient’s organism and it’s allergic reaction. To perform
the vegetative test using the medicine which is not in the BAS allergic standards catalogue, enter the mode "Analysis",
place the medicine under study to the resonance camera, press the button "Vegetative Test", enter the name of the
examined medicine and press the button "ОК". For better monitoring of the dynamic of vegetative reaction of the
organism to this medicine use the mode "Comparative analysis" which calculates the intensification and weakening of organism compensatory reaction when the information influence is performed by the testing medicine.
The internal vegetative test is performed in "Standards catalogue"
mode, by pressing the mouse left button choose the medicine from the
standards’ list where the medicine is already written as a digitized mode.
To start this mode press the button "Vegetative test"
Reprint
Allows to record any nutritious substance to the matrix. Enter the menu "Standards Catalogue" and choose the medicine
which is effective for this patient (value "D" should not exceed 0.425) and press the button "Reprint". It is important to
remember that all medicines are recorded in the inverted form and it has to be re-inverted on the diagram before medicine
preparation by pressing the button “Invert"; then you chose the matrix in the similar way the matrix is chosen when
preparing nazods and press the button "Start Preparation".
Analysis
Analysis
The button "Estimate the fragment" allows to estimate in more details the marked zone on the picture projection using the scaling mode.
"Localization" allows to determine the
frames of the focus with the most evident
structure deviations. To determine the
frames press the left button on the
mouse pointing the picture projection
and mark the area under study; to close
the counter press again the left button on the mouse.
"Estimate" allows to estimate the
focuses of the most evident deviations
on the picture chosen by the specialist.
The estimation goes automatically, non
marked pictures and pictures without
focuses are omitted.
"Delete paste" allows to delete the marked focuses. To mark the focuses press the mouse right button.
Above the diagram of the organ (focus) you will see buttons "Test" and "Spectrum". If you press the button "Test" you
will see the form "Standards". The button "Spectrum" shows the enlarged diagram with amplitude values of the signal
by the spectrum frequencies.
Collecting data
This mode is intended for the patient’s
active participation in the process of
data collection and allows to get into
more personal contact in the Patient - Operator dialog.
Using the method of the dynamic point
the operator can localize more
precisely the zone of body destruction.
Comparative Analysis
Comparative Analysis allows to estimate (in figures) the result of the correction made in dynamic, and to analyze the status of compensatory reactions of the system after the vegetative test of the medicines. The left picture
characterizes the initial state, the right shows the state of effects in dynamic or after some period of time. The button
"Auto Search" allows to find automatically the compared organs in the common data index. The buttons
"Improvement" and "Deterioration" allow to emphasize the sections in the tissue structure where the changes have
been noticed.
Enthropy Analysis – available in the mode "Standards’ Analysis"
Enthropy (2 factor) analysis allows to
construct mathematic criterion of the
pathologic process, considering the
healthy tissue (organic medicine) as a
basis stage and clinically evident form
of any pathologic process as a final
stage and mathematically calculates
the diagrams of a number of
intermediate states. During analysis
the most similar state to one of the
intermediate states (or final state) is
determined in order to show the maturity of the process.
It is necessary to consider that the
entropy index data at the values 1, 2
shows that there is no tendency in the
development of the process under
study; 3, 4 show the pre-clinical stages
of the process; 5,6 shows the maturity of the process.
Low spectral similarity with the standard (correlation exceeds 1) if the entropy data
value is high at the level of 5 or 6 shows the remission status of the pathological process with low adaptation reaction levels of the tissue.
Entropic Analysis
The small difference in spectral similarity (dispersion) of all range of entropic data from 1 to 6 shows the acute process.
The more similar diagram in spectral characteristics is marked by bold line on the diagram and the value is marked in red,
in our case it is 0.760.
To look at the diagrams separately or together press the correspondent buttons in the layout "Hide N(S) diagram”
Press the button “Surfaces” to look at the diagram in the mode "Surfaces", to return to the mode "Lines"
press this button again.
Entropic Analysis
The button "Object" reflects the most optimal
values of the process under study.
"Vera-Test" shows the diagram with the most
spectral similarity.
Энтропийный анализ
To monitor the dynamic of the process press the button "Dynamic" above the
diagram.
The button "Spectrum" shows the enlarged diagram.
The button "Exit" allows to exit the entropic analysis.
"Interdance - Screening" allows to monitor the destruction degree of different
tissues with developing destruction process. It is possible to monitor the intensity of
destructive changes in all groups of tissue structures simultaneously (button" Е "), and
separately by morphological groups. Button "А" (red) reflects the arterial system;
Button "V" (blue) venous system;
Button "N" (yellow) nervous system;
Button "L" (green) lymphatic system;
Button "М" (orange) musculoskeletal [locomotor] system;
Button "О" (lilac) the rest groups of tissues.
NLS Analysis is accessible from the mode "Standards analysis"
NLS- analysis (multivariate) is identical with entropic analysis except the fact that all intermediate stages in
NLS – analysis are recorded as standards from the
biological object in different stages of destructive process to
allow to construct the more precise model of the process
development. It is a very complicated and laborious form
of recording the process and that is the reason why the
NLS-analysis is used only to evaluate the biochemical
indexes.
The growing amplitude of the outgoing signal (blue line on
the diagram) reflects the intensification of compensatory
mechanisms. At its maximum value the diagram of the
incoming signal can abruptly drop down when the amplitude of the incoming signal (red line) is high. This
means that the adaptation mechanisms are broken and
the irreversible state is developed