Upload
duongliem
View
231
Download
2
Embed Size (px)
Citation preview
The World’s Leading Manufacturer of BGA Rework Systems
Introduction to PDR and
Focused IR Technology
The World’s Leading Manufacturer of BGA Rework Systems
Focused IR Technology
PDR manufactures some of the finest SMT, BGA, QFN rework
systems and stations available worldwide. Our BGA rework stations
use PDR’s Focused IR technology developed specifically to deliver
the highest performance and soldering quality as demanded by our
3500+ customers, many of the world’s top names in electronics
manufacturing.
The World’s Leading Manufacturer of BGA Rework Systems
SMT/BGA rework solutions for all applications
• Patented Focused IR Heating Technology • Low cost hand tools to PC controlled ‘high end’ BGA/uBGA systems • Ready for lead-free and 0201’s applications • Chips, SOICs, PLCCs, QFP’s, BGAs, uBGAs, Flip Chip, SMT Connectors/Sockets • Telecoms, Computers, Automotive, Defence, Avionics and Comsumer Electronics • OEMs, Contract Manufacturing, Service/Maintenance and R+D
The World’s Leading Manufacturer of BGA Rework Systems
The need for quality in BGA rework
• Most early field failures are caused by defective soldering! • Often, poor quality rework will pass electrical tests but if investigated further would fail more demanding ALT tests • Customers today are demanding quality • Field failures can be dangerous, or irritating and lead to customers seeking alternative brands/suppliers • Poor quality rework WILL cause you problems and the choice is sort out the quality or... do not rework!
The World’s Leading Manufacturer of BGA Rework Systems
The ingredients for good quality BGA rework
• Materials
Consideration of components, PCBs, flux, paste, control
of contamination - solderability (40%) • Equipment
Cost effective equipment, tools, accessories to enable operators to
simply, accurately apply materials, postion and place components either mechanically or manually (20%) • Process
Accurate application of materials and tight, repeatable temperature control during reflow (40%)
The World’s Leading Manufacturer of BGA Rework Systems
Desoldering
• Apply flux
• Reflow
• Remove component
• Remove solder from PCB
• Clean and inspect
The World’s Leading Manufacturer of BGA Rework Systems
Soldering
• Apply Flux (or Solder Paste)
• Align and Place
• Reflow
• Clean (as required) and Inspect
The World’s Leading Manufacturer of BGA Rework Systems
General heating arrangement
750-2000W Quartz IR
PCB Preheater
Collimating Lenses
150W IR Lamp
Iris Aperture to adjust IR spot
Focusing Lenses (Lens Attachment)
The World’s Leading Manufacturer of BGA Rework Systems
PDR’s patented ‘Focused IR’ Heating Technology PDR’s IR Lens System
37-120mm Working Distance
40mm Underside Clearance
Non-contact IR Temperature Sensor
Energy Balance
Quartz IR PCB Preheater 750-2000W Medium Wave
Focused IR 150W Short-Medium Wave
Component Heating
The World’s Leading Manufacturer of BGA Rework Systems
PDR’s patented ‘Focused IR’ heating technology
PDR’s IR Lens System
37-120mm Working Distance
40mm Underside Clearance
Non-contact IR Temperature Sensor
Focused IR 150W Short-Medium Wave
Component Heating
Quartz IR PCB Preheater 750-2000W Medium Wave Energy Balance
The World’s Leading Manufacturer of BGA Rework Systems
PDR ThermoActive Software control with real-time closed-loop temperature control
The World’s Leading Manufacturer of BGA Rework Systems
Simple controls
Set Target. . . Control and Log Result
The World’s Leading Manufacturer of BGA Rework Systems
Lead-free profile
245 C (normal 225 C)
185 C (normal 165 C)
The World’s Leading Manufacturer of BGA Rework Systems
Entry Level Rework Stations IR Handtool
150W Short-Medium Wave Component Heating
10-25mm Working Distance
45mm Underside Clearance Quartz IR PCB Preheater
750W Medium Wave
Ø7/14mm IR Spotsize Used In A Scanning Motion
The World’s Leading Manufacturer of BGA Rework Systems
PDR’s patented ‘Focused IR’ heating technology
PDR’s IR Lens System
37-120mm Working Distance
40mm Underside Clearance
Non-contact IR Temperature Sensor
Focused IR 150W Short-Medium Wave
Component Heating
Quartz IR PCB Preheater 750-2000W Medium Wave Energy Balance
The World’s Leading Manufacturer of BGA Rework Systems
Main PDR focused IR advantages
Focused IR Component Heating
No Nozzles, Focus Hoods or Shields
Modular and Upgradeable Systems
Low Cost of Ownership
Excellent Control Software
Easy to Set-Up and Safe to Use
The World’s Leading Manufacturer of BGA Rework Systems
Prestige applications using PDR Systems for rework
Since the introduction of BGAs into SMT production we have seen some prestigious applications use exclusively PDR for their rework requirements including, Leading Mobile Phone Manufacturers, Aviation, Space, Formula One, TGV and Automotive. All these applications require the highest of yield for safety reasons and therefore use PDR’s Focused IR Rework Stations for BGA rework.
The World’s Leading Manufacturer of BGA Rework Systems
PDR is focused on the development of IR technology and equipment for SMT/BGA rework. PDR was formed in 1985 and started selling rework systems in 1987. Since then over 4000+ of our products have been sold, supported and serviced worldwide through a network of professional distributors, supported by PDR or PDR associated offices in the UK and the USA.