TECHNICAL COMPARISON OF ADHESIVES

FOR CERAMIC WITH POLYMERS

AND LATEX CONTENTAUTHORS

JOHAN DAVID CAJAMARCA GONZALEZ

JEISON MAURICIO ACERO CASTRO

DIRECTED BY ING.JUAN CARLOS RUGE

INTRODUCTION

Natural latex has been used for various uses including

is, casting plaster, cement, metals, among others. even

it is used to help stabilize the soil of the desert to be

suitable for agricultural use. The polymer construction is

used in pipes to be inert to chemicals and no oxidation

of it, is also used as thermal insulation.

GOALS

GENERAL

To test different adhesives according wing NTC 4381, in

order to define a technical comparison between ceramic

adhesives containing latex and polymers used in the

construction industry

PARTICULARS

To develop a technical comparison of what were the

reactions, behavior, performance of these adhesives

undergo strength tests, giving a rate which is more

feasible for use.

COLOMBIAN TECHNICAL STANDARD TESTS 4381

VERTICAL SLIP TENSILE STRENGTH OF GLUES

TECHNICAL COMPARISON ADHESIVES FOR CERAMICS

CONCLUSIONS

•The vertical slip test for Portland adhesive sample provides a

better grip or result because after twenty minutes 0.2 mm slides

while Pegacor between 1.2 and 1.6 mm slip by the above it is

concluded that the response of greater vertical displacement is

Portland becoming a minimal difference.

• The tensile strength test which was performed applying a

tension force. This test reveals that behavior of Portland

adhesive presents better response for a load solicitation.

VALOR INICIAL VALOR FINAL DESFASE VALOR INICIAL VALOR FINAL DESFASE

BALDOSA N.1 26mm 27mm 1mm BALDOSA N.1 27.8mm 28mm 0.2mm

BALDOSA N.2 25.9mm 27.5mm 1.6mm BALDOSA N.2 26mm 26.3mm 0.3mm

BALDOSA N.3 26mm 27.2mm 1.2mm BALDOSA N.3 26mm 26.5mm 0.5mm

DESPLAZAMIENTO ESFUERZO EN MPa DESPLAZAMIENTO ESFUERZO EN MPa

22 12.74 24 17.65130 180

REQUISITO: Pegantes de fraguado normal: mayor o igual a 0.7 Mpa

Pegantes de fraguado rapido: mayor o igual a 0.5 Mpa luego de 24h de pegado

COMPARACION TECNICA DE PEGANTES PARA CERAMICA

PEGACOR PORTLAND

RESISTENCIA A LA TRACCION DE PEGANTES PARA CERAMICA RESISTENCIA A LA TRACCION DE PEGANTES PARA CERAMICA

FUERZA RESISTIDA(Kg/cm2) FUERZA RESISTIDA (Kg/cm2)

tiempo de 20 minutos.

DESLIZAMIENTO EN SUPERFICIES VERTICALES

COMPARACION TECNICA DE PEGANTES PARA CERAMICA

PEGACOR PORTLAND

DESLIZAMIENTO EN SUPERFICIES VERTICALES

REQUISITO : El deslizamiento debe ser menor o igual a 2mm

despues de mantener el sistema en posicion vertical por un

SCANNING ELECTRON MICROSCOPY