Embed Size (px)
Citation preview
Mobile Glassblowing Studios, LLC
www.mobileglassblowingstudios.com
ph. 844-glas2go (452-7246) or 229-352-9988
Introducing the Baby Dragon Glassblowing Furnace!
Mobile Glassblowing Studios, LLC
www.mobileglassblowingstudios.com
ph. 844-glas2go (452-7246) or 229-352-9988
Introducing the Baby Dragon Glassblowing Furnace!
The most versatile (and affordable) mobile offhand glassblowing system on the market. Designed to be rugged
and reliable for years of use and travel. The size and functionality offers excellent flexibility for use in a variety of
possible venues; perform demonstrations and workshops at summer camps, schools, art centers, farmers markets,
private parties or anywhere else you can think of!
The Baby Dragon is a furnace/glory hole combo created to make it simple and easy to do on-site demonstrations,
taking only minutes to set up. Fill it up with glass (nuggets, recycled bottles, or any kind of cullet) in the morning &
turn it on; it takes about two to three hours to get to working temp (depending on the quality of glass desired). Drain
the tank at the end of the day and shut it off. Repeat.
The Baby Dragon can be configured to run on natural gas, low pressure or high pressure propane. It
consumes on average 0.65 gallons of fuel per hour.
It houses a semi-invested Engineered Ceramics crucible that will hold up to 30 pounds of molten glass.
The maximum door opening is 8" x 8" (15" deep). The door comes standard with 6" radius opening on the
right side.
The footprint of the furnace is 31" wide by 34” long (not including detachable accessories), designed to fit
through a standard 32" door opening.
It has an overall height of 4'-8", just short enough to fit in a U-Haul covered trailer (4'-10"opening). The top
half separates from the base, so that the unit may be transported in a pick up truck or minivan.
Total weight of the unit is around 400 pounds, yet it rolls quite easily on 8" casters (2 stationary, 2 swivel).
The removable burner system is very straight forward, and comes with variable speed blower, Gibberson
burner tip, and BASO safety valve.
The frame and case are made of powder-coated steel and brushed stainless steel.
1 side port allows for access to chamber heat, to power a variety of accessory options currently under
development, including annealers, garages, color box/cullet heater, and baking oven, to name a few.
Standard accessories are all detachable for ease of transport. They include a double yoke (fully adjustable),
pipe hanger (for working solo), pipe warming stand, handle.
All hardware needed for operation is included.
Price: $5,500 + applicable sales tax for all orders placed before September 1, 2015. Crating, Shipping/Delivery
and Setup Demonstration are not included in the price.
