Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
Titolo presentazione
sottotitolo
Milano, XX mese 20XX
International Exchanges for SoM Students
14 November, 13 December 2019
Sergio Terzi, Anna Colella
Useful Contacts – Sergio Terzi
• International Mobility Coordinator for
Management Engineering students
(incoming and outgoing)
• Coordinator of the ME International Double
Degrees (ULB, Audencia, Tsinghua, Tongji)
• QTEM Dean for the QTEM Network
• Professor of “Industrial Technologies” and
“Design and Management of Production
Systems”
– Office 2.09 - DIG Department
Useful Contacts – Anna Colella
International Exchanges and Mobility
School of Management
02 2399 4061
Office 0.15 A – DIG (Programme Office)
Office Hours:
Tuesday and Thursday 10 am - 12.30 pm
Or by appointment
Interested in Studying Abroad?
POLIMI offers many types of study abroad opportunities: brief
study abroad exchanges, semester long exchanges, dual and
double degrees, alliances, one year programs…
The most updated set of information for POLIMI offerings can be
found at:
https://www.polimi.it/en/services-and-opportunities/experience-
abroad/
Studying abroad? – Yearly exchanges at a glance for
Management Engineering
Incoming students:• 247 students (total
incoming exchangestudents: 1800)
Outgoing students:• 283 students (total
PoliMi outgoingstudents: 1565)
Total exchanges with 190 institutions (incoming + outgoing)(Data AY 2018/2019)
Studying Abroad? – Outgoing ME students by Countries (data
2016-2019)
0
20
40
60
80
100
FRA
NC
IA
GER
MA
NIA
SPA
GN
A
CIN
A
PO
RTO
GA
LLO
BR
ASI
LE
SVEZ
IA
BEL
GIO
AU
STR
ALI
A
NO
RV
EGIA
CO
REA
FIN
LAN
DIA
OLA
ND
A
REG
NO
UN
ITO
CIL
E
MES
SIC
O
CO
LOM
BIA
IND
IA
PO
LON
IA
SVIZ
ZER
A
AR
GEN
TIN
A
AU
STR
IA
CA
NA
DA
RU
SSIA
GIA
PP
ON
E
PER
Ù
ESTO
NIA
LIB
AN
O
LITU
AN
IA
BU
LGA
RIA
IRLA
ND
A
LETT
ON
IA
STA
TI U
NIT
I D'A
MER
ICA
.
# o
f st
ud
ents
Studying abroad? – A guideline to choose your mobility
experience
1. What am I seeking from this
experience?
2. How long can I stay abroad?
3. Where can I go to?
4. How much can I be flexible?
Studying abroad? – A guideline to choose your mobility
experience
Studying abroad? – A guideline to choose your mobility
experience
Studying abroad? – A guideline to choose your mobility
experience
Studying abroad? – A guideline to choose your mobility
experience
Studying abroad? – A guideline to choose your mobility
experience
Studying abroad? – A guideline to choose your mobility
experience
Standard “Erasmus” exchanges
International Double/Dual Degrees
International Alliances
Studying Abroad? – A guideline to choose your mobility
experience
Normally 1 semester abroad (on average 30 credits)
More than 150 destinations worldwide
Both at BS and MS level
Normally 1 year abroad (it depends on the program),
possibly in more sites
Alliance4Tech, UNITECH, GlobalE3, QTEM
MS level
Cultural experience Intensive experience
1,5-2 years abroad
• International Double Degrees promoted by POLIMI (more than 40 programs), at BS and MS level
• International Dual Degrees promoted by SoM-POLIMI (Audencia, Solvay, Tongjii, Tsinghua), only at MS level
Intensive experience, Double degree
Studying abroad? – The “International Mobility” process @ POLIMI
StudentInternational
Mobility Offices
CCS Mgt. Engr.International Commission
1) Launch the Mobility Call (offer)
2) Participates in the Mobility Call
(demand)
3) Evaluate the candidates and define a merit list
4) Accepts the location assigned
to him/her
Studying Abroad? – “International Mobility” calls
International Mobility Call:
• https://www.polimi.it/en/services-and-opportunities/experience-
abroad/study-mobility/erasmus/call/
• Deadline January 9, 2020
UNITECH Call:
• https://www.polimi.it/en/services-and-opportunities/experience-
abroad/study-mobility/unitech/
• Deadline January 14, 2020
International Mobility Call – Studesk Workshops
The Studesk Team will be holding the following workshops to
explain all procedures, rules and requirements related to the
2020/21 International Mobility Call
Tuesday, December 3, 12.15 - 2.15 pm
Tuesday, December 10, 12.15 - 2.15 pm
Tuesday, December 17, 12.15 - 2.15 pm
Room L 1.5 Building BL12 - LA MASA
Studying abroad? – The SoM Guides & Support Materials
Studying abroad? – The SoM Guides & Support Materials
Who – When – Where – How – Why…
Opt for an international experience?
A broad overview of the process and key factors to consider
Studying abroad? – The SoM Guides & Support Materials
A detailed guide of the rules that apply to international
exchanges within the Department and at the Polimi
level.
USE THIS! Don’t refer to the Faculty advisors – their role is to support you with your Learning
Agreement
https://www.som.polimi.it/downloadbrochuremip/DIG/LT/ENG/INTERNATIONAL/International_Exchanges_Guide.pdf
Standard “Erasmus” exchanges
International Double/Dual Degrees
International Alliances
Studying abroad? – A guideline to choose your mobility
experience
Normally 1 semester abroad (on average 30 credits)
More than 150 destinations worldwide
Both at BS and MS level
Normally 1 year abroad (depending on programs), possibly in more sites
Alliance4Tech, UNITECH, GlobalE3, QTEM
MS level
Cultural experience Intensive experience
1,5-2 years abroad• International Double
Degrees promoted by POLIMI (more than 40 programs), at BS and MS level
• International Dual Degrees promoted by SoM-POLIMI (Audencia, Solvay, Tongjii, Tsinghua), only at MS level
Intensive experience, Double degree
Standard “Erasmus” Exchange
• More than 150 destinations, worldwide
• Normally it is based on one semester abroad; extensions can
be requested according to interest and pending availability
• Students must define their study plan in advance… but don’t
worry, it can be changed at any time!
• Every year approx. 250 ME students take part in the
experience, based on the results of the internal competition
system applied in the Mobility Call
• The “experience” is more important than the credits!
See the Rules of the School for details!
Standard “Erasmus” Exchange: Internationalization
Commission
ME Students will refer to a faculty advisor, member of the
Internationalization Commission, ONLY to:
- Compile the Learning Agreement for the exchange
- Make changes to the LA once they are abroad
- Validate the credits of the courses taken abroad
For ALL other questions and procedures, they MUST refer to the
Studesk Office Bovisa (Campus La Masa)
Final Thesis Abroad?
ME MSc students can work on their thesis worldwide as long as they have a POLIMI thesis supervisor, as per Italian Law
They can pursue all types of thesis work available to ME students:
- Report (max 2 points)
- Thesis without discussant (max 4 points)
- Thesis with discussant (max 7 points)
Details on types of thesis work available on 3i School website:
http://www.ingindinf.polimi.it/didattica/esami-di-laurea-e-laurea-magistrale/
Final Thesis Abroad?
Students who wish to work on their thesis abroad must:
a) Find a Polimi thesis supervisor before they leave. Often there
is a connection between the supervisor and the faculty at the
receiving institution, as this facilitates the student’s work
a) Define their project before they leave. Often the project is
also related to a specific foreign university
Final Thesis Abroad?
For these reasons taking part in the Mobility Call - where the final
destination assigned to the student may NOT be his/her first
choice - is NOT recommended for a thesis work
Students also risk suffering isolation and not taking part in the
host university life if they are merely working on a thesis
Hence, the School requires for students to take AT LEAST ONE
COURSE when studying abroad for their thesis if they decide to
through an exchange programme (Mobility Call)
Standard “Erasmus” exchanges
International Double/Dual Degrees
International Alliances
Studying abroad? – A guideline to choose your mobility
experience
Normally 1 semester abroad (on average 30 credits)
More than 150 destinations worldwide
Both at BS and MS level
Normally 1 year abroad (it depends by programs), possibly in more sites
Alliance4Tech, UNITECH, GlobalE3, QTEM
MS level
Cultural experience Intensive experience
1,5-2 years abroad• International Double
Degrees promoted by POLIMI (more than 40 programs), at BS and MS level
• International Dual Degrees promoted by SoM-POLIMI (Audencia, Solvay, Tongjii, Tsinghua), only at MS level
Intensive experience
International Double Degrees promoted by POLIMI
• More than 40 locations
• Typically based on earning 120 credits abroad (2 years!)
• Approx. 5-10 students from ME every year, based on the internal competition
• Students should define their study plan according to the available course options (which change every year)
• We have double degrees both at BSc and MSc level
• Most of the double degrees have a minimum threshold (generally an average > 26/30)
Be prepared to be patient and flexible for such an intensive experience!
International Double (Dual) Degrees promoted by POLIMI-SoM
• Dedicated programs for ME MSc students
• 5 positions for each institution every year
• 1,5 years abroad (80-90 credits)
• Suggested streams for each institutions
• Only for MSc students
• Minimum threshold = average > 26/30
• Each program has its specific rulesand study plans, and some are still atpivotal stage
• Be prepared to be patient andflexible for such an intensiveexperience!
International Double (Dual) Degrees promoted by POLIMI-SoM
Detailed prospects are available on the SoM website:
www.som.polimi.it/en/course/master-of-science/#studywithus
International Dual Degree promoted by POLIMI-SoM
1st year of the MSc @ POLIMI
(60-70 credits)
2nd year of the MSc @ the host institution
(60-70 credits)
Internship and final
work @ the host
institution
Standard “Erasmus” exchanges
International Double/Dual Degrees
International Alliances
Studying abroad? – A guideline to choose your mobility
experience
Normally 1 semester abroad (on average 30 credits)
More than 130 destinations worldwide
Both at BS and MS level
Normally 1 year abroad (depending on the programs), possibly in more sites
Alliance4Tech, UNITECH, GlobalE3, QTEM
MS level
Cultural experience Intensive experience
1,5-2 years abroad
• International Double Degrees promoted by POLIMI (more than 40 programs), at BS and MS level
• International Dual Degrees promoted by SoM-POLIMI (Audencia, Solvay, Tongjii, Tsinghua), only at MS level
Intensive experience, Double degree
International Alliances
• POLIMI is a proud member of several international networks and alliances, which promote international mobility and multi-cultural experiences
• Alliances give POLIMI students the possibility of becoming part of international networks, opening international opportunities
• Each Alliance has its rules
• Relevant alliances for MSc students:
• UNITECH (for all POLIMI students)
• Alliance4Tech (for Management, Mechanical and Computer Science students)
• QTEM (for Management students)
International Alliances – UNITECH
• Up to 1 year abroad, in one site
• 3 weeks throughout the year of
mutual experiences (in 3 other
sites)
• Approx. 20 extra credits to be
done, on top of the required credits
• UNITECH standard study plans
exist, based on partner schools’
academic offering
• 1 specific call at POLIMI
(deadline 14 January 2020)
• Approx. 1-2 ME students per year,
based on internal competition
International Alliances – Alliance4Tech
• “Free mobility” idea: students can move amongst European campuses, earning credits
• It is based on a 2-semester abroad approach + 1 Winter School
• A list of available courses for each site is available
• Up to 10 positions for ME at MSc level
• www.alliance4tech.eu
• Part of the regular mobility call
International Alliances – Alliance4Tech
At least 60 credits to be taken @ POLIMI
(only for MSc courses)
Semester abroad in
Berlin, Paris,
(London)
Semester abroad in
Berlin, Paris,
(London)
A list of available courses for each site is available, and it is annually revised
International Alliances – How to candidate to Alliance4Tech
• Read the instructions about the programme:
www.alliance4tech.eu
• Apply on line to the POLIMI “Mobility Call” (opens end of
November) - follow the instructions carefully!
• Select “Alliance4Tech” as a preference
• Max 10 students from MSc ME will be selected
International Alliances – QTEM
• QTEM, Quantitative Techniques for
Economics and Management, is a
global network which aims to bring
together outstanding students, Academic
Partners and International Corporations
• QTEM focuses on developing skills in
analytical and quantitative techniques
to support decision making in an
international context
International Alliances – QTEM
QTEM’sDNA
min. GMAT score 650 3+ countries
min. 50% ECTS
Excellence International Quantitative &analytical
ProfessionalExperience
min. 2 months
Quantitative Techniques for Economics & Management
International Alliances – QTEM
• Max 15 positions, for MSc ME students
• QTEM offers 2 semesters abroad, with a final internship
• Semesters should be attended @ 2 different QTEM member
universities
• QTEM specifies the list of available courses for each member
• QTEM has a list of specific rules for participating in the programme
• QTEM accepts only high-profile student with GMAT of > 650!
• More info:
– www.QTEM.org
– https://www.youtube.com/watch?v=7R0gSFhCiT0
– https://www.youtube.com/watch?v=ahAmsMQ5FFg
International Alliances – QTEM rules
At least 60 credits to be taken @ POLIMI
(only for MSc courses)
Semester abroad in one QTEM
site
Semester abroad in another
QTEM site
A list of available courses for each site is available, and it is annually revised
Mandatory short
internship, to be done in
one of the 3 locations (including
Italy)
QTEM rules for POLIMI students Rules
# previous international semesters (at Master’s or Bachelor’s level)
-
# QTEM international semesters (quantitative, at Master’s level, with a QTEM Partner)
2
Short-term internship (quantitative, during or after the Master)
1
Long-term internship (quantitative, international, during the Master)
-
Quantitative Master’s course creditsMin. 50 QTEM credits (ECTS)
And min. 22 ECTS on average per exchange
# QTEM Modules Min. 1
Minimum GMAT score 650
International Alliances – QTEM rules
International Alliances – QTEM rules
QTEM Modules QTEM Sub-Modules (as per the QTEM course database*)
1. Finance and Risk
Management
1) Controlling & Accounting
2) Finance - Actuarial Sciences
3) Finance - Banking and Management of Financial Institutions
4) Finance - Corporate Finance
5) Finance - Financial Markets and Derivatives
6) Risk Management
2. Applied Economics and
Public Policy
1) Microeconomics, Contract & Auction Theory
2) Policy-Making, Regulation and Pricing
3) Tax Management and International Optimization Strategies
4) Macroeconomic Models and Forecasting, Computational Economics
3. Innovation and Strategy 1) Entrepreneurship
2) Strategy; Industrial Organization; Applied Game Theory
4. Marketing and Supply
Chain
1) Marketing and Sales
2) Supply Chain, Operations and Logistics Management
5. Business Intelligence
and Big Data
1) Quantitative Techniques & Tools
2) Business Intelligence
Others** 1) Society and Culture
* Information accessible on-line on www.qtem.org. ** Residual category (cannot become a QTEM Module on the QTEM Degree).
International Alliances – How to apply to QTEM
• Carefully read the instructions about the program:
www.qtem.org (track A)
• Apply to the POLIMI “Mobility Call” (opens end of Nov)
(follow the instructions carefully!)
• Select “QTEM” in your application
• Max 15 students from MSc ME will be selected
• Then, students will be asked to list their preferences for the
first mobility, among the list of QTEM partners
• All the students will then be ranked and QTEM will assign
students to locations
• After 1 semester performed abroad, students will be asked to
list their preferences for the second semester
International Alliances – How to apply to QTEM
Students candidate
themselves to the POLIMI Mobility Call, specifying
“QTEM”Students
Mobility Office POLIMI
QTEM coordinator
Selects students, according to the
Mobility call rules (max 15 students)
Selected students accept QTEM program,
following Mobility Call
rules
Selected students elaborate
their preferences
for QTEM
Registers the preferences and
proposes them to QTEM
QTEM checks students’ profile (GMAT 650 is
needed!), ranks students (based on GMAT score) and
then assigns them to the first QTEM location
Selected students formulate their Study Plan with
POLIMI coordinator, then they can start
the mobility
International Alliances – QTEM Programme Timeline
• December 2019-January 2020: students apply to the POLIMI mobility call
• January 2020: POLIMI selects QTEM candidates (up to 15)
• February 2020: Names of pre-selected students for the Fall Semester are submitted to QTEM
• March 2020: QTEM allocates them to the QTEM sites for the Fall Semester
• 15 April 2020: Selected students must have their GMAT certificate! When performing the test online students must request to have the results sent directly to QTEM
• June 2020: POLIMI pre-selected student names are submitted to QTEM for the Spring Semester
• July 2020: QTEM allocates students to the QTEM sites for the Spring Semester
• September 2020: The QTEM experience begins
• March 2021: Second QTEM semester begins (Spring)
Upon Your Return – Support International Mobility
SURVEY: Before the advisor can complete the course validation students will be required to take part in the online survey on their international exchange experience
Thanks to this minor commitment, you will contribute effectively towards improving the experience for those who will go abroad after you. Thank you!
TRAVEL STORIES: Sharing the exchange experience with peers can be of great help to students wishing to study abroad. Returning students will be asked to write a brief report on their exchange experience
Studying abroad? – “International Mobility” calls
International Mobility Call
• https://www.polimi.it/en/services-and-opportunities/experience-
abroad/study-mobility/erasmus/call/
• Deadline January 9, 2020
UNITECH Call
• https://www.unitech-international.org/the-
programme/application
• Deadline January 14, 2020
Useful Contacts – Sergio Terzi
• Coordinator of International Mobility for
Management Engineering students
(incoming and outgoing)
• Coordinator of the ME International Double
Degrees (ULB, Audencia, Tsinghua, Tongji)
• QTEM Dean for the QTEM Network
• Professor of “Industrial Technologies” and
“Design and Management of Production
Systems”
– Office 2.09 DIG Department
Useful Contacts – Anna Colella
International Exchanges and Mobility
School of Management
02 2399 4061
Office 0.15 A – DIG (Programme Office)
Office Hours:
Tuesday and Thursday 10 am - 12.30 pm
Or by appointment