Upload
doannguyet
View
234
Download
3
Embed Size (px)
Citation preview
INSULATED gLASS HArDWArE
i.G. Plugs
Cross Connector
Muntin Systems
Muntin End Connectors
119 South 2nd Street • Waterville, MN 56096 • 507-362-8685 • FAX 507-362-8893 • E-mail: [email protected]
www.lcsplastics.com
Septum Plugs
COMPOSITE MUNTIN CONNECTOrS
119 South 2nd Street • Waterville, MN 56096 • 507-362-8685 • FAX 507-362-8893 • E-mail: [email protected]
www.lcsplastics.com
g1
EXTrEME MUNTIN CONNECTOrS
119 South 2nd Street • Waterville, MN 56096 • 507-362-8685 • FAX 507-362-8893 • E-mail: [email protected]
www.lcsplastics.com
g2
MUNTIN END CONNECTOrS
119 South 2nd Street • Waterville, MN 56096 • 507-362-8685 • FAX 507-362-8893 • E-mail: [email protected]
www.lcsplastics.com
g3
LCS078 Muntin End Connectors are designed for uses with Tremco’s Swiggle Seal and provides a finished end for other muntin end sealing methods using drop-in muntin assembly. The Muntin End Connector’s design makes it a versatile and labor saving connector. Specify with or without nubs. No nubs works with contoured muntin.Colors available: Black, Grey and Natural.
LCS078 Features:1. Flexible shaft which allows for
use in both straight and diamond grid patterns, eliminating the need to cut different angles.
2. Part strength exceeds part requirements and is nonfogging.
3. Positive friction enables part to stay in position.
4. Fits 1/4"- 3/4" Muntin Width.
Part Dimensions Number Airspace A b C D
LCS078-2 pad 1/4" .220 .765 .140 1.080
LCS078-3 pad 1/2" .485 .765 .140 1.080
LCS078-4 pad 7/16" .420 .765 .140 1.080
LCS078-5 pad 3/4" .734 .765 .140 1.080
LCS078-6 pad 13/16" .795 .765 .140 1.080
LCS078-7 pad 11/16" .665 .765 .140 1.080
LCS078-8 pad 5/16" .295 .765 .140 1.080
LCS078-9 pad 5/8" .605 .765 .140 1.080
LCS078-10 pad 3/8" .360 .765 .140 1.080
LCS078-11 pad 9/16" .546 .765 .140 1.080
* Specify without nubs if using contour muntin.
*Nubs
+ the LCS200 Series Muntin End Connectors Choose One Muntin Choose One Muntin “Style” “Size” Single Double Prong Prong Pad - Air Space 3/8 1/2 9/16 5/8 11/16 3/4 3/16 x .610 3/16 x 5/8 3/16 x 1/2 3/16 x 13/16 1/4 x 5/8 8mm x 18mm+ Can be used with the Ezi Burst Sunburst system. + Fits Standard and Contour muntin styles.
MUNTIN END CONNECTOrS
119 South 2nd Street • Waterville, MN 56096 • 507-362-8685 • FAX 507-362-8893 • E-mail: [email protected]
www.lcsplastics.com
g4
Muntin Style Choose One “Air Space”
1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16
Muntin Size 3/16 x 5/8 * Fits Standard or Flat muntin only.
*LCS076 "Economy" Muntin End Connector
Choose ONE of Each
LCS Precision Molding
119 South 2nd Street • Waterville, MN 56096 507-362-8685 • FAX 507-362-8893
EZI-BUrST MUNTIN SYSTEM
119 South 2nd Street • Waterville, MN 56096 • 507-362-8685 • FAX 507-362-8893 • E-mail: [email protected]
g6
www.lcsplastics.com
MUNTIN CONNECTORS
119 South 2nd Street • Waterville, MN 56096 • 507-362-8685 • FAX 507-362-8893 • E-mail: [email protected]
www.lcsplastics.com
G7
LCSR704 and LCSR708 Pass thru Connectors eliminate the need to punch muntin for cross connection.Standard industry colors available.
LCSR704
Part Dimensions Number A B C D e f g
LCSR708 .750 1.60 .255 .190 .640 .135 .570
LCSR704 .750 2.445 .250 .180 .635 .135 .575
CBA
D
e
f
IH
g
J K L
D
BA
D
e
f
g
C
ArgON I.g. PLUgS
119 South 2nd Street • Waterville, MN 56096 • 507-362-8685 • FAX 507-362-8893 • E-mail: [email protected]
www.lcsplastics.com
g8
LCS003 Argon i.G. Plugs are a temporary 5/32" marker, allowing easy hole location for gas filling after the unit has been sealed. LCS003-S is a collared version of the LCS003. It will fit larger diameter hole sizes up to .170.LCS003-2 a permanent Argon Gas Fill Plug which allows testing of the unit for Argon gas. A syringe is inserted into the plug for testing. When the syringe is removed the Argon Plug is self sealing. Colors available are natural and blaze orange for easy identification.
Part Dimensions Number A b C D E F
LCS003-S .155 .130 .950 .120 .170 .330
LCS003 Argon i.G. Plug
Part Dimensions Number A b C D E F
LCS003 .160 .810 .160 .325 — —
LCS003-2 .160 .810 .160 .325 — —
LCSR740 .188 .422 .140 .230 — —
SEPTUM PLUg
119 South 2nd Street • Waterville, MN 56096 • 507-362-8685 • FAX 507-362-8893 • E-mail: [email protected]
www.lcsplastics.com
g9
3-WAY ADJUSTABLE MUNTIN CONNECTOrS
119 South 2nd Street • Waterville, MN 56096 • 507-362-8685 • FAX 507-362-8893 • E-mail: [email protected]
www.lcsplastics.com
g10
LCS product solutions just keep getting better and better. With the introduction of the second generation of muntin to muntin connectors, LCS continues to demonstrate our commitment to excellence.
Outstanding Features of this NEW Adjustable Muntin to Muntin Connector series are:
• Fabricating Time is Reduced.
• Center Muntin Connections are Secure.
• Connectors are Exceptionally Affordable.
• LCS550 Needs No Mitered Angle Cuts. (Accepts butt cut muntin.)
• LCS550 with Center Button is available in colors or brass plated.
** If you are interested in another 3-Way Connector size, please call for more information.
LCS500 3-Way Adjustable Connector
Without button Fits Muntin Size With button LCS500 1/4 x 5/8 LCS550 LCS502 1/4 x 5/16 LCS553 LCS501 3/16 x 5/8 LCS551 LCS503 3/16 x 13/16 LCS552
LCS500 & LCS550 3-Way Adjustable Muntin to Muntin Connector
Completely manual, the operator lays the Super Spacer into the fixture, adjusts the centering guide, locks the hand clamp, and pulls the material across the blade. The fixture will accommodate any size Super Spacer from 1/4" to 1". The blade is adjustable to vary the depth of the channel. (Use only with Super Spacer Silicone Foam.)
Model LCS-SSG Super Spacer™ Groove tool
Grooving FixtureFor Leaded Glass
Insert Panels
Use to Create Panels For:• Entrance Doors• Door Side Lites• Decorative Windows
The Super Spacer Grooving Fixture allows you to create your own grooved spacer for leaded and stained glass insert panels.
Model LCS-SSN Super Spacer™ Notcher
LCS’ Hand Notcher is designed to make manual corner notching and application of Super Spacer™ faster and more uniform. Ideally, this hand notcher is used in combination with LCS’ suction-cup indexing Rotary Work Table (LCS3084).
This hand-operated tool assures consistent placement of Super Spacer™ at 3/16" from the glass edge and provides a clean and accurate corner notch; it also adjusts to fit all Super Spacer™ sizes ranging from 1/4" to 1 3/16" and can be sharpened easily with the use of a few shop tools.
Also available in the Slimline version.
SUPEr SPACEr grOOVE TOOL & SUPEr SPACEr NOTCHEr
Commonstock
Deepcut
Shallowcut
119 South 2nd Street • Waterville, MN 56096 • 507-362-8685 • FAX 507-362-8893 • E-mail: [email protected]
www.lcsplastics.com
g11