Upload
vodiep
View
225
Download
2
Embed Size (px)
Citation preview
1
PART# DESCRIPTION 56” [ ] 68” [ ] 80” [ ] ITEmS
SS_B117 5/16” X 1” AllEN BuTTON hEAD 16 16 16
SS-B251 1/4” X 1/2” AllEN CylINDER hEAD 16 16 16
SS-B168 1 3/4” X 5/16” AllEN COuNTER SuNk BOlT 10 12 14
SS-N005 5/16” NylON NuT 16 16 16
SS-w008 5/16” X 3/4” wAShER 8 8 8
SS-w010 5/16” X 1” wAShER 8 8 8
l101 lADDER ADAPTOR 1 4 4 4
l102 lADDER ADAPTOR 2 4 4 4
l103 lADDER ADAPTOR 3 4 4 4
l101,l111,l121 lADDER lEfT 1 1 1
l102,l112,l122 lADDER RIghT 1 1 1
l201 lADDER STEPS 5 6 7
Z555 RuBBER ENDCAPS 2”X1” 4 4 4
gl001 gASkET (lADDER ADAPTOR 1 ) 4 4 4
INSTRUCTION MANUALINSTRUCTION MANUAL
Universal Ladder with Angled
Required Tools
Power Tool with 5/16” drill bit
wrench
items not drawn to scale
Packaged by Date
L001 56” Angled Ladder Dodge, Ford All Years, Chevy up till 95, GMC up till 95, Transit Connect
L002 68” Angled Ladder with Hooks Chevy 1996-On, GMC 1996-On
L003 68” Angled Ladder Freightliner, Dodge or Mercedes Sprinter & Nissan NV Low Tops
L004 80” Angled Ladder Freightliner, Dodge or Mercedes Sprinter & Nissan NV High Tops
Allen Tool
2
Repeat all steps 4 times for the 4 ladder mounts. Do not completely tighten bolts so adjustments can be made later on.
Do not completely tighten bolts so adjustments can be made later on.
B168
3
Use a 5/16” drill bit
w010N005
w010
B117
gl001
Z555ExteriorInterior
Position the ladder mounts onto your vehicle’s door.Depending on your curve of your vehicle you can use hole combinations to create different angles. Have 2 bolts per mount
After mounts are secured to vehicle tighten all bolts on ladder rungs and ladder mounts.
B117w008
w008
N005