Identification of parts and contents

L-860

Specifications

SD card slot

Power switch

USB port Power receptacle

Camera

Right view

MICROSCOPE CAMERA WITH DISPLAY

Thank you for purchasing the HOZAN L-860 MICROSCOPE CAMERA WITH DISPLAY. With proper care and handling, this fine instrument will provide years of trouble-free operation. Please read this entire instruction manual carefully before attempting to place this instrument in service. Please keep this instruction manual available for reference.

Still: 1920 x 1080(2,000,000)

1/2.8” CMOS

C mount Lens mount type Max. frame rate

Record file type

Number of pixels

Element

Size: 11.6” wide

Still: JPG / Movie: AVI

30 fps

Monitor

SD/SDHC memory card (32GB max.)

Glare liquid crystal, IPS system

Resolution: 1920 x 1080

Record medium

12 Vdc 1A Rating

Dimen-sions

282(W) x 202(H) x 62(D) mm without projections

■ Wireless mouse, Battery for mouse, SDHC memory card, AC adapter are accompanied.

Exclusive OS

Software

Basic functions: still and movie, Displaying functions: reverse, lock, monochrome, lines, HDR Adjust functions: exposure, white balance, frequency, gamma, contrast, chrome, brightness, sharpness, noise reduction, RGB

9.4 W

710 g

Power monitor lamp

Bottom view

Weight

１１１１

Setting up frequency of power source (page 11) and formatting SDHC memory card (page 9) are

necessary before use.

Unit: mm Dimensions

INSTRUCTION MANUAL

Movie: 1920 x 1080(2,000,000)

Precautions

２２２２

Warning and caution symbols

These symbols are used throughout the instruction manual to alert the user to potential safety hazards as follows : Warning … Notice when incorrect handling could cause the user's death or serious injury. Caution … Notice when incorrect handling could cause injury to the user or material damage. Even if the instructions do not have Caution mark, there are some possibilities for a serious situation. Follow the instructions.

This camera if for inspection work. Do not use for any other purpose.

1. Do not soak in water, solvent or oil. Do not operate with wet hands. This could cause a short circuit, electric shock or a fire. Also causes malfunction. 2. Do not use near a heating element or an ignitable thing. 3. Lightning may cause an electric shock. Disconnect when thundering. 4. Do not modify the equipment in any way. This could cause a fire, shock or injury. 5. Avoid prolonged use for your health. Take suitable intervals and give your eyes a rest .

Warning

Caution

1. Do not use this product at these places; where vibration occurs, where impact occurs, where dust exists, where strong magnetic exists, where it is high temperature and high humidity, where the sun is shining directly. 2. Do not use or store where static electricity and electrical noise may generate. 3. Do not expose to the scorching sun. Do not leave where it is high temperature. 4. Decide a stable place for setting this camera. Otherwise, the camera could fall or turn over causing malfunction. 5. Put on the cap when not in use for a long time. 6. Do not turn the image sensor to the sun. This could damage the element.

Preparation

Load the battery into the accompanied wireless mouse. Extract the receiver from the bottom of wireless mouse. Insert this receiver into the USB port on the bottom of the display. Power the wireless mouse.

４４４４

Establish the time (see page 4 and 5 for explanation of icons, page 11 for details).

５５５５

３３３３

Connect the accompanied Ac adapter to the power receptacle, then plug to the outlet. The power monitor lamp will illuminate red and the device is getting ready. ３３３３

６６６６

Insert the SD card into the SD card slot on the right side of the display, then depress the power switch to start up the camera. The power monitor lamp will illuminate blue. The camera will function without inserting the SD card, but images can not be saved in this case. A new SD card must be formatted before use (see page 9).

Install the lens. Use a base, holder and illumination if necessary. ２２２２

７７７７

This product consists of +Microscope camera with display +Instruction manual (this book) +Wireless mouse +Ac adapter +SDHC memory card (called “SD card” hereafter) . +Battery for mouse (Not warranted in its life since just a testing battery.)

Checking the contents

This product does not have a lens. Please prepare a lens with C mount separately.

Remove the cap of the camera, then peel the protection film from the sensor. １１１１

The display can be reclined about 90 degrees backward. Adjust appropriately for your work. Do not over do. This could damage the device.

４４４４

Operation

Operating various menus Shade the mouse pointer on each icon and click. The functions are explained on the right page.

The various operating menus are arranged as shown in the illustration. Some menu will displayed when the mouse pointer approaches. ② Image quality adjustment menu will continue to open until closed by clicking x at the upper right of the menu.

Displaying various menus

Here the basic operations are explained. See page 6 and after for concrete functions.

Start up guide

Energize. The shooting image is displayed. Focus by adjusting the working distance and operating the focus ring.

① Main menu

② Image quality adjustment menu

③ Line menu

５５５５

Operation

② ② ② ② Image quality adjustment menu

Adjusting the shade, brightness and so on (see P10).

Auto white balance

Red/Green Blue/Green

Time setting

(blue spot)

③ ③ ③ ③ Line menu Setting the lines (see P12).

Choosing pattern

Choosing type

Lines on/off

Line width

Line color

Move upper/right

Move lower/left

Center mark on/off

Save pattern

Center mark size

Zoom in Zoom out Horizontal reverse Vertical reverse

Locking images

Monochrome HDR display Comparison

Still Movie Preview SD format

① ① ① ① Main menu

Click these icons to operate principal functions such as photography, zooming (see P6)

Table of icons

(red spot)

６６６６

Main menu

Operation

Digital zoom

Keep depressing these icons or operate the wheel of the mouse. The image will be enlarged or reduced digitally.

Reversing images vertically or horizontally. Click the icon to reverse the image. The state of on/off is indicated at the left lower corner. Using both reverse function jointly can be done.

<Examples>

V:off H:off Normal

V:on H:off Vertical reversed

V:on H:on Vertical and

Horizontal reversed (turned 180°)

[Not zoomed]

Displayed area

[Zoomed]

Drag Displayed area can be selected

V:off H:on Horizontal reversed

Explanation for various functions

( : zoom in : zoom out )

The magnification indicated at the lower left corner is just a value of digitally zoomed magnification. So this is different from the actually gotten magnification. Digital zooming is effective only on displaying. Images are saved in x1 size even taken when digitally zoomed.

Caution

Reverse [ : vertical reverse (V) : horizontal reverse (H) ]

V=Vertical, H=Horizontal

７７７７

Operation

Locking image ( )

The image being displayed is locked by depressing this icon. The other operations except digital zoom and line marker cannot be done. If try to do, “FREEZED” is indicated at the center of the display. The locked images cannot be saved. Use for temporary holding. Click the icon again to release locking.

Monochrome ( )

The images are displayed in black and white. “B&W MODE” is indicated at the left lower corner. Click the icon again to return to colored display.

HDR display ( )

The images are displayed in HDR. HDR (high dynamic range) is the function which displays reducing the difference be-tween the highlight and shadow. Click the icon again to return to natural display.

Compare the displaying image with the saved images. Click the icon. The screen turns to as the illustration.

Choose and click the image to be com-pared. The screen is divided in two.

The images are displayed their half sections when the screen is divided in two. Drag if want to see the invisible part.

８８８８

Operation

Compare images ( )

Movie ( )

Click this icon to shoot movies. The passed time is indicated at the right lower corner. The other functions are sus-pended. Click the icon again to finish shooting.

Image being shot

home before next delete

Still ( )

Click this icon to shoot stills. The file name will indicated at the center of the screen. Taken year, month, day and time are reflected on the file name. Example: IMG20160101123456 (2016, Jan, 01, 12:34:56)

VID when it is movie.

Image chosen

from stock

Image being shot

before next return to

upper hierarchy

SD cards are formatted. A SD card which is used for this device for the first time must be formatted. The all data in it are deleted when formatted. Click this icon. Select “YES” when asked YES/NO. Format will be completed.

９９９９

Operation

Preview ( )

Card format ( )

The saved images are displayed in a table. Choose and click an image. It is displayed in the whole screen. A movie may be played back.

home before next delete

１０１０１０１０

Operation

Image control menu

Reset

Click this button to return to the initial set-ting.

Control bars

Drag with the tub or depress arrows.

tub

Check boxes

Click the box. A check is indicated. That function is selected.

The various operations

Switch on/off of auto exposure.

Exposure time is manually controlled. This is not used when Auto Exposure is on.

Auto: Switch on/off of auto white balance. One push: If feel color tone automatically gotten is unnatural, push this button while holding white paper and such in the whole area of screen. The color tone is naturally revised taking the color at that time as white. Auto white balance func-tion becomes off.

Explanation for various functions

１１１１１１１１

Operation

Gamma correction in done. Usually this is unnecessary, because the display of this product is one body with the camera.

Adjust the difference of bright and dark.

Adjust the depth of color.

Adjust the brightness. This cannot be operated when Auto Exposure is off, use .

Adjust the emphasizing degree for edges.

Reducing noises.

Adjust red/green balance. If do this adjustment when AWB (auto white balance) is on, AWB becomes off.

Adjust blue/green balance. If do this adjustment when AWB (auto white balance) is on, AWB becomes off.

Set the present time. From left to right, year, month, day, time, minute and second are set in these boxes. Click the arrows on and under the boxes to move early and backward.

Set the frequency of the power source. Select from 50Hz or 60Hz corresponding with the frequency of your area. This is effective to prevent flickers of fluorescent lights.

The time information is reflected on the file name.

(red spot)

(blue spot)

Operation

１２１２１２１２

Line menu

Lines and center cross line are indicated on the screen. Vertical lines maximum 8 and horizontal lines maximum 8 are indicated. And indication patterns of maximum 8 are saved even when using without SD card. How to indicate lines

３３３３

Click to select the saving place from A to H.

The alphabets in the icons changes from A to H corresponding clicks.

Click to indicate lines. １１１１

Decide the saving place before save the indication. Initially every saving place from A to H has a pattern, 8 vertical and 8 horizontal lines with equal intervals as shown in the illustration. Please move or delete lines freely (see page 13) and save the favorite patterns.

２２２２

Drag the lines to move. See page 13 for detailed settings such as width, color, posi-tion and so on.

Click again to conclude the line function. ４４４４

１３１３１３１３

Click the icon to change the width of the line being selected. Width is changed in four levels.

Click the icon to change the width of the center cross line. Width is changed in two levels.

Click the icons to move precisely.

Operation

Click the icon to select the line. The indication in the icon changes corresponding clicks. From H1 to H8 are horizontal lines and from V1 to V8 are vertical lines, and + is the center cross line. The letter in the icon represents the line being selected.

Detailed settings for line

Settings are performed to each line individually.

Select the line ( )

Various settings

・ Indicate or not indicate ( )

Click the icon to indicate or not indicate the line being selected.

・ Width ( )

・ Color ( )

Click the icon to change the color of the line being selected. Select among seven colors.

・ Location ( )

Move a vertical line to right. Move a horizontal line above.

Move a vertical line to left. Move a horizontal line below.

・ Save patterns ( )

Click the icon to save the indication pattern in the saving place (“2” of page 12) being selected.

is indicated when center cross line is selected.

１１１１

２２２２ Perform various settings to the line selected “1”.

１４１４１４１４

Related products

This product does not have a lens. Please use combining with these lenses and other related products.

・・・・ Lenses and Extension Rings

L-802-2 Lens Unit L-818 Extension Ring L-819 Extension Ring

A low-priced C mount lens gotten high magnification using with extension rings.

L-600-12 Lens Unit L-600-35 Lens Unit

High resolution lenses with focus and aperture ring, most suitable for inspection in low magnification.

L-815 Zoom Lens

The magnification is adjusted freely. Select according to the purpose.

L-802-2 L-818 L-819

L-600-12 L-600-35

L-815

L-816 Zoom Lens

See our website for detailed specifications such as magnification.

１５１５１５１５

Related products

・・・・ Others

L-509 Stereo Head Holder

L-521 Standard Table

L-520 Long Post

Change to this long post from post of the standard table when the working distance in long.

L-523 Long Type Arm L-525 Long Table

Use these devices if inspect large object.

L-519 Flexible Arm

The camera is positioned freely, up and down, right and left, angles.

L-509

L-521

L-520

L-523

L-525

L-519

１６１６１６１６

18.11

1-2-12 Saiwaicho, Naniwa-ku, Osaka 556-0021, Japan Tel : +81-6-6567-3111 Fax : +81-6-6562-0024